There was a problem with a combination of the `eager` URL update, browser `back` button, and hybrid applications. Details provided in internal ticket http://b/123667227.
This fix handles the problem by setting `router.browserUrlTree` when all conditions have failed, meaning the browser doesn't do anything with the navigation other than update internal data structures. Without this change, the problem was an old value was stored in `router.broserUrlTree` causing some new navigations to be compared to an old value and breaking future navigations.
PR Close#30160
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().
DEPRECATION:
When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:
```
[{
path: 'lazy',
loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```
This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:
```
[{
path: 'lazy',
loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```
This form of lazy loading offers significant advantages in terms of:
* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
(see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))
As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.
PR Close#30073
Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
clarify scrollPositionRestoration enabled to fully describe the functionality it provides. refactor app module example to compile and remove dependency on unnecessary framework. Remove component example due to bug on reload.
PR Close#29260
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.
PR Close#29392
This PR also changes the name of `EmptyOutletComponent` to `ɵEmptyOutletComponent`. This is because `ngcc` requires the node to retain the original name while dts bundler will rename the node is it's only exported using the aliases.
Example typings files:
```ts
declare class EmptyOutletComponent {
}
export {EmptyOutletComponent as ɵEmptyOutletComponent}
```
will be emitted as
```ts
export declare class ɵEmptyOutletComponent {
}
```
PR Close#28833
* Use exclusively `TeamComponent` class for examples, as currently there are at least 3 different component classes being used, one of which is actually as a type argument for a `Resolve<T>` implementation.
PR Close#29093
When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
The value here is unimportant on initialization since it's not looked at until the second navigation. However, sometimes in testing the `Location` service is mocked out, or the Router constructor manually called. Assuming `Location` exists in the constructor leads to test failures in `google3` therefore we initialize to a value that will not cause errors.
PR Close#28376
With #27680, a bug was fixed where multiple redirects using `eager` URL update could cause navigation to fail. However, that fix introduced a problem where with `skipLocationChange` enabled, the URL tree rendered was not properly stored for reference. This specifically caused an issue with named router outlets and subsequent navigations not being recognized.
This PR stores the correct `UrlTree` for reference with later navigations. It fixes the regression introdued with #27680.
Fixes#28200
PR Close#28300
* Interface that a class can implement to be a guard deciding if a children can be loaded.
'...if a children...' changed to '...if children...'
* Interface that a class can implement to be a guard deciding if children can be loaded.
PR Close#27894
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
This option means guards and resolvers will ignore changes when a provided predicate function returns `false`. This supports use cases where an application needs to ignore some param updates but not others. For example, changing a sort param in the URL might need to be ignored, whereas changing the a `project` param might require re-run of guards and resolvers.
Related to #26861#18253#27464
PR Close#27682
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
This option means guards and resolvers will ignore changes to matrix parameters. Guards and resolvers will be rerun when the path changes, when path parameters change, or when query parameters change.
The primary use case for such a mode is when updating the UI and getting the URL to be in sync with local changes. For example, if displaying a sortable table, changing the sort direction is often handled by the table itself. But you would want to update the URL to be in sync with what's being displayed to the user. As long as the table sort direction is stored as a matrix parameter, you can use this option to update the URL without causing the overhead of re-running guards and resolvers.
Related to #26861#18253
PR Close#27464
This option means guards and resolvers will ignore changes to optional
parameters such as query and matrix params. When the path or any path
params change, guards and resolvers will be run
Related to discussion in #18253
FW-560 #resolve
PR Close#26861
* Removed `andObservable` helper function in favor of inline implementation
* Flow `boolean | UrlTree` through guards check
* Add tests to verify behavior of `checkGuards` function flowing `UrlTree` properly
PR Close#26521
* If all guards return `true`, operator returns `true`
* `false` and `UrlTree` are now both valid returns from a guard
* Both these values wait for higher priority guards to resolve
* Highest priority `false` or `UrlTree` value will be returned
PR Close#26478
* Pull out `activateRoutes` into new operator
* Add `asyncTap` operator
* Use `asyncTap` operator for router hooks and remove corresponding abstracted operators
* Clean up formatting
* Minor performance improvements
PR Close#25740
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
* Pull out `activateRoutes` into new operator
* Add `asyncTap` operator
* Use `asyncTap` operator for router hooks and remove corresponding abstracted operators
* Clean up formatting
* Minor performance improvements
PR Close#25740
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
CanLoad now defines UrlSegment[] as a second parameter of the function.
Users can store the initial url segments and refer to them later, e.g. to go
back to the original url after authentication via router.navigate(urlSegments).
Existing code still works as before because the second function parameter
does not have to be defined.
Closes#12411
PR Close#13127
Within an @NgModule it's common to include in the imports a call to
a ModuleWithProviders function, for example RouterModule.forRoot().
The old ngc compiler was able to handle this pattern because it had
global knowledge of metadata of not only the input compilation unit
but also all dependencies.
The ngtsc compiler for Ivy doesn't have this knowledge, so the
pattern of ModuleWithProviders functions is more difficult. ngtsc
must be able to determine which module is imported via the function
in order to expand the selector scope and properly tree-shake
directives and pipes.
This commit implements a solution to this problem, by adding a type
parameter to ModuleWithProviders through which the actual module
type can be passed between compilation units.
The provider side isn't a problem because the imports are always
copied directly to the ngInjectorDef.
PR Close#24862
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
This change adds to internal API hooks (undocumented API) for
`before/afterPreactivation`. The immediate need for this API is to
allow applications to build support for marshalling navigation between
a web worker and the main application.
Fixes#24202
PR Close#24204
The recognizer code used to call Object.freeze() on queryParams before
using them to construct ActivatedRoutes, with the intent being to help
avoid common invalid usage. Unfortunately, Object.freeze() works
in-place, so this was also freezing the queryParams on the actual
UrlTree object, making it more difficult to manipulate UrlTrees in
things like UrlHandlingStrategy.
This change simply shallow-copies the queryParams before freezing them.
Fixes#22617
PR Close#22663
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
This is a more defensive approach to ensure that references to
ParamInheritanceType from the published declarations do not cause
compilation errors when compiling Angular from the published packages.
Fixes#21456
PR Close#21773
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Bazel runs on newer version of RxJs than is installed in Yarn. The never version subclasses `EmptyError` in a different way which fails the `instanceof` check. This change makes the `instanceof` check more robust with respect to `EmptyError`.
PR Close#21053
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
Jason Aden
Alex Rickabaugh
Trevor Karjanis
Brandon
Filipe Silva
Frederik Prijck
Judy Bogart
ijz953
Alan Agius
José Toledo Navarro
Maxim Mazurok
Sarun Intaralawan
Pawel Kozlowski
stoneLeaf
kevinphelps
William Neely
Karanveer Plaha
Matias Niemelä
cexbrayat
Miško Hevery
Igor Minar
miginmrs
Andrew Lobban
Pete Bacon Darwin
Kara Erickson
Daniel Wiehl
vincecampanale
Trotyl
Marcus Krahl
Stephen Fluin
George Wilde
Adrien Samson
sergeome
George Kalpakas
Sarun Intaralawan
Rado Kirov
Victor Savkin
swseverance
Zaven Muradyan
Steven Liekens
Vikram Subramanian
Victor Berchet
Dan Bucholtz
JiaLi.Passion
vsavkin
Patrick Shields
Yuan Gao
Alex Eagle
Mark Kennedy
Tobias Bosch
Chuck Jazdzewski