clang-format (on mac) has taken a disliking to this particular line, and
rewrites one of the ɵ characters to an invalid Unicode sequence.
PR Close#24479
At runtime in JIT mode, when the compiler writes a reference to a symbol that symbol
is resolved through a symbol table named angularCoreEnv in render3/jit/environment.
Previously, this symbol table was not kept up-to-date with the Ivy instruction set
and the names of symbols the compiler could reference.
This change brings the symbol table in sync, and also adds a test that verifies every
symbol the compiler can reference is available at runtime in the symbol table.
PR Close#24479
When creating content queries from a directive on an element we need to take into account
existing view queries. The same element can be reported to both content and view queries
so freshly created content queries must be combined with pre-existing view queries.
PR Close#24507
NOTE: This does NOT add parsing of namespaced attributes
- Adds AttributeMarker for namespaced attributes
- Adds test for namespaced attributes
- Updates AttributeMarker enum to use CamelCase, and not UPPER_CASE names
PR Close#24386
This patch ensures that any destination animation styling (state values)
are always applied even if the DOM node is not apart of the DOM.
PR Close#24236
Previously, the transitive scopes of an NgModuleDef were computed
during execution of the @NgModule decorator. This meant that JIT-
compiled modules could only import other JIT-compiled modules, as
the import mechanism relied on the calculation of transitive scopes
to already have happened for the imported module.
This change moves computation of transitive scopes to a function
`transitiveScopesFor` (and makes it lazy). This opens the door for
AOT -> JIT or JIT -> AOT imports, as transitive scopes for AOT
modules can be calculated when needed by JIT, and AOT modules can
also write expressions that call `transitiveScopesFor` when
importing a JIT-compiled module.
PR Close#24334
Two new CircleCI environments are created: test_ivy_jit and test_ivy_aot.
Both run a subset of the tests that have been marked with Bazel tags as
being appropriate for that environment.
Once all the tests pass, builds are published to the *-builds repo both
for the legacy View Engine compiled code as well as for ivy-jit and ivy-aot.
PR Close#24309
This adds ngtsc/util/src/visitor, a utility for visiting TS ASTs that
can add synthetic nodes immediately prior to certain types of nodes (e.g.
class declarations). It's useful to lift definitions that need to be
referenced repeatedly in generated code outside of the class that defines
them.
PR Close#24230
This will allow RouterTestingModule to better support lazy loading of modules
when using summaries, since it can detect whether a module is already loaded
if it can access the id.
PR Close#24258
This patch ensures that if a list of nodes (that contain
animation triggers) are moved around then they will retain their
trigger-value state when animated again at a later point.
PR Close#24238
This change adds to internal API hooks (undocumented API) for
`before/afterPreactivation`. The immediate need for this API is to
allow applications to build support for marshalling navigation between
a web worker and the main application.
Fixes#24202
PR Close#24204
`NgForOf` used to implement `OnChanges` and than use
`ngOnChanges` callback to detect when `ngForOf` binding
changed to update the differ. We now do the checking
manually which puts less pressure on the runtime to do
the bookkeeping and should result in minor perf improvement.
PR Close#23378
Fixes#23023.
When a HTTP Interceptor injects HttpClient it causes a DI cycle. This fix is to use Injector to lazily inject HTTP_INTERCEPTORS while setting up the HttpHandler on the server so as to break the cycle.
PR Close#24229
Fixes#19278.
innerHTML is conservatively marked as an attribute for security purpose so that it's sanitized when set. However this same mapping is used by the server renderer to decide whether the `innerHTML` property needs to be reflected to the `innerhtml` attribute. The fix is to just skip the property to attribute reflection for `innerHTML`.
PR Close#24213
Previously the style encapsulation attributes(_nghost-* and _ngcontent-*) created on the server could overlap with the attributes and styles created by the client side app when it botstraps. In case the client is bootstrapping a lazy route, the client side styles are added before the server-side styles are removed. If the components on the client are bootstrapped in a different order than on the server, the styles generated by the client will cause the elements on the server to have the wrong styles.
The fix puts the styles and attributes generated on the server in a completely differemt space so that they are not affected by the client generated styles. The client generated styles will only affect elements bootstrapped on the client.
PR Close#24158
After #24113 there is 2 `TNode` in those tests:
- 1 for the host,
- 1 for the text node.
The PR #23924 status was green because it branched off master before #24113 was
merged in.
PR Close#24208
Closure Compiler in some configurations complains about duplicate
imports. This change replaces the export-with-import with an export of
the imported symbol.
closes#23993
PR Close#24203
This PR tackles a simple case where ViewRef definition point (<ng-template>) is the
same as the insertion point (ViewContainerRef requested on the said <ng-template>).
For this particular case we can assume that we know a container into which a given
view will be inserted when a view is created. This is not true fall all the possible
cases so follow-up PR will be needed to extend this basic implementation.
PR Close#24179
This commit builds out enough of the JIT compiler to render
//packages/core/test/bundling/todo, and allows the tests to run in
JIT mode.
To play with the app, run:
bazel run --define=compile=jit //packages/core/test/bundling/todo:prodserver
PR Close#24138
Fixes#23280, #23133.
This fix lets code access DOM types like Node, HTMLElement in the code. These are invariant across requests and the corresponding classes from Domino can be safely provided during platform initialization.
This is needed for the current sanitizer to work properly on platform-server. Also allows HTML types in injection - Ex. `@inject(DOCUMENT) doc: Document`.
PR Close#24116
Previously event handlers on the server were setup directly. This change makes it so that the event registration on the server go through EventManagerPlugin just like on client. This allows us to add custom event registration handlers on the server which allows us to hook up preboot event handlers cleanly.
PR Close#24132
In ngIvy directives matching (determining which directives are active based
on a CSS seletor) happens at runtime. This means that runtime needs to have
enough context to match directives. This PR takes care of cases where a directive's
selector should match bindings (ex. [foo]="exp") and event handlers (ex. (out)="do()").
In the mentioned cases we need to have binding / output "attributes" for directive's
CSS selector matching purposes. At the same time those are not regular attributes and
as such should not be reflected in the DOM.
Closes#23706
PR Close#23991
Allows to write:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { pure: false } })
.createComponent(MenuComponent);
when you only want to set the `pure` metadata,
instead of currently:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { name: 'displayName', pure: false } })
.createComponent(MenuComponent);
which forces you to redefine the name of the pipe even if it is useless.
Fixes#24102
PR Close#24103
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Short-circuitable expressions (using ternary & binary operators) could not use
the regular binding mechanism as it relies on the bindings being checked every
single time - the index is incremented as part of checking the bindings.
Then for pure function kind of bindings we use a different mechanism with a
fixed index. As such short circuiting a binding check does not mess with the
expected binding index.
Note that all pure function bindings are handled the same wether or not they
actually are short-circuitable. This allows to keep the compiler and compiled
code simple - and there is no runtime perf cost anyway.
PR Close#24039
This commit adds a mechanism by which the @angular/core annotations
for @Component, @Injectable, and @NgModule become decorators which,
when executed at runtime, trigger just-in-time compilation of their
associated types. The activation of these decorators is configured
by the ivy_switch mechanism, ensuring that the Ivy JIT engine does
not get included in Angular bundles unless specifically requested.
PR Close#23833
Since `versionedFiles` behaves in the exact same way as `files`, there
is no reaason to have both. Users should use `files` instead.
This commit deprecates the property and prints a warning when coming
across an asset-group that uses it. It should be completely removed in
a future version.
Note, it has also been removed from the default `ngsw-config.json`
template in angular/devkit#754.
PR Close#23584
Closure compiler with type based optimizations has a bug where externs for inherited static fields are not being honored. For Angular Elements this meant that 'observedAttributes' static field which is marked as an extern for the base HTMLElement class was getting renamed.
This commit works around the bug by using quoted access of 'observedAttributes' that explicitly prevents the renaming.
PR Close#23843
The recognizer code used to call Object.freeze() on queryParams before
using them to construct ActivatedRoutes, with the intent being to help
avoid common invalid usage. Unfortunately, Object.freeze() works
in-place, so this was also freezing the queryParams on the actual
UrlTree object, making it more difficult to manipulate UrlTrees in
things like UrlHandlingStrategy.
This change simply shallow-copies the queryParams before freezing them.
Fixes#22617
PR Close#22663
This commits changes how clients are added in `SwTestHarness`, so that
the behavior in tests closer mimics what would happen in an actual
ServiceWorker.
It also removes auto-adding clients when calling `clients.get()`, which
could hide bugs related to non-existing clients.
PR Close#23625
Previously, the compileComponent() and compileDirective() APIs still required
the output of global analysis, even though they only read local information
from that output.
With this refactor, compileComponent() and compileDirective() now define
their inputs explicitly, with the new interfaces R3ComponentMetadata and
R3DirectiveMetadata. compileComponentGlobal() and compileDirectiveGlobal()
are introduced and convert from global analysis output into the new metadata
format.
This refactor also splits out the view compiler into separate files as
r3_view_compiler_local.ts was getting unwieldy.
Finally, this refactor also splits out generation of DI factory functions
into a separate r3_factory utility as the logic is utilized between different
compilers.
PR Close#23545
Previously, ngOnDestroy was only called on services which were statically
determined to have ngOnDestroy methods. In some cases, such as with services
instantiated via factory functions, it's not statically known that the service
has an ngOnDestroy method.
This commit changes the runtime to look for ngOnDestroy when instantiating
all DI tokens, and to call the method if it's present.
Fixes#22466Fixes#22240Fixes#14818
PR Close#23755
Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
g3 and the Angular repo have different versions of TypeScript, and
ts.updateIdentifier() has a different signature in the different versions.
There is no way to write a call to the function that will compile in both
versions simultaneously.
Instead, use ts.getMutableClone() as that has the same effect of cloning
the identifier.
PR Close#23550
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
`ng.performCompilation` can return an `undefined` program, which is not handled by ngc-wrapped.
Avoid crashing by checking for the error return and returning the diagnostics.
PR Close#23468
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
In certain cases seen in production, simplify() can returned
undefined when simplifying decorator metadata. This has proven tricky
to reproduce in an isolated test, but the fix is simple and low-risk:
don't attempt to spread an undefined set of annotations in the first
place.
PR Close#23349
This patch is in response to #23401 where a non-const enum was being
compiled as an empty object when used in an animation player when
`ng build --prod` was being processed. This patch is a immediate fix
for the issue and #23400 tracks it.
Closes#23401
PR Close#23402
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Alex Rickabaugh
Pawel Kozlowski
Alex Eagle
Mark Levy
Pete Bacon Darwin
Judy Bogart
Fabian Wiles
Brandon Roberts
Ben Lesh
Marc Laval
Jason Aden
Misko Hevery
George Kalpakas
Kara Erickson
Matias Niemelä
Victor Savkin
Victor Berchet
Greg Magolan
Trotyl
Alan Agius
Vikram Subramanian
JoostK
Johnson Lin
Adam
Alec
Martin Probst
Jeremy Elbourn
John Papa
Olivier Combe
cexbrayat
alexzuza
Heo Sangmin
Lucas Sloan
Omar Griffin
Andrew Seguin
swseverance
Zaven Muradyan
Igor Minar
Paul Freedman
Steven Liekens
HiveSolution