Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
In View Engine, developers can pass bootstrap and entry components
as nested arrays. e.g.
```ts
export const MyOtherEntryComponents = [A, B, C]
@NgModule({
entryComponents: [MyComp, MyOtherEntryComponents]
})
```
Currently using nested arrays for these properties causes
unexpected errors to be reported in Ivy since the semantic
NgModule checks aren't properly recursing into the nested
entry/bootstrap components. This issue has been unveiled by
enabling the strict function parameter checks.
PR Close#30993
Currently the `ɵɵdefineComponent` method has incorrect type
definitions the `directives` and `pipes` metadata property.
The incorrect types allow developers to pass in already instantiated
`DirectiveDef` or `ComponentDef` objects. This can cause unexpected
failures because the definition internally only expects `Type` objects
and now incorrectly tries to read the `ngDirectiveDef` or `ngComponentDef`
of existing definitions.
This issue has been unveiled by enabling the strict function parameter
types flag, where the directive definitions are determined from each array
element in the `directives` or `pipes` property (which can throw).
PR Close#30993
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Prior to this commit, default value for LOCALE_ID was not setup for Closure Compiler. In Closure Compiler, we can use `goog.LOCALE` as a default value, which will be replaced at build time with current locale.
PR Close#31519
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Prior to this commit, it was impossible to override providers defined via ModuleWithProviders using TestBed.overrideProvider API. The problem was caused by the fact that we were not taking into account these providers while calculating accumulated set of provider overrides. This commit updates the logic to extract providers from ModuleWithProviders and calculate the final set of overrides taking them into account.
PR Close#31415
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.
This PR resolves FW-1340.
PR Close#31456
Since `goog.getMsg` does not process ICUs (post-processing is required via goog.i18n.MessageFormat, https://google.github.io/closure-library/api/goog.i18n.MessageFormat.html) and placeholder format used for ICUs and regular messages inside `goog.getMsg` are different, the current implementation (that assumed the same placeholder format) needs to be updated. This commit updates placeholder format used inside ICUs from `{$placeholder}` to `{PLACEHOLDER}` to better align with Closure. ICU placeholders (that were left as is prior to this commit) are now replaced with actual values in post-processing step (inside `i18nPostprocess`).
PR Close#31459
Prior to this commit, the `` unicode symbol that represents `&ngsp` in translations was not handled correctly, i.e. was not replaced with a whitespace, thus appearing on a screen. This commit adds post-processing and replaces the mentioned symbol with a whitespace.
PR Close#31479
`i18nStart` was calling `allocExpando` even if there was 0 new variable created.
This created a new expando instruction with the value 0 which was later interpreted as the start of a new expando block instead of just skipping 0 instructions.
FW-1417 #resolve
PR Close#31451
Fixes Ivy's return value for `DebugNode.context` not being consistent for the case where there is both a structural directive and a component on a node. In `ViewEngine` the instance of the component would be returned, whereas in Ivy the context of the directive is returned.
Also adds a couple of extra test cases for how `DebugNode.context` deals with directives.
This PR resolves FW-1343.
PR Close#31442
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Adds a schematic and tslint rule that automatically migrate the consumer from `Renderer` to `Renderer2`. Supports:
* Renaming imports.
* Renaming property and method argument types.
* Casting to `Renderer`.
* Mapping all of the methods from the `Renderer` to `Renderer2`.
Note that some of the `Renderer` methods don't map cleanly between renderers. In these cases the migration adds a helper function at the bottom of the file which ensures that we generate valid code with the same return value as before. E.g. here's what the migration for `createText` looks like.
Before:
```
class SomeComponent {
createAndAddText() {
const node = this._renderer.createText(this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
```
After:
```
class SomeComponent {
createAndAddText() {
const node = __rendererCreateTextHelper(this._renderer, this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
function __rendererCreateTextHelper(renderer: any, parent: any, value: any) {
const node = renderer.createText(value);
if (parent) {
renderer.appendChild(parent, node);
}
return node;
}
```
This PR resolves FW-1344.
PR Close#30936
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31325
Prior to this commit, host element of a view created via TestBed.createComponent was not attached to the component's host, making it problematic to use TestBed.createComponent API in component factories, which might be used for testing purposes only. This behavior is observed in google3 app tests and was supported by VE, so this commit aligns Ivy and VE.
PR Close#31318
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
When `walkTNodeTree` was refactored, the case of ICU expressions was forgotten (because it was handled in the `else` previously).
This PR fixes that to handle it like `ElementContainer`.
FW-1411 #resolve
PR Close#31313
Currently in Ivy whenever we encounter a new namespace, we set it in the global state so that all subsequent nodes are created under the same namespace. Next time a template is run the namespace will be reset back to HTML.
This breaks down if the last node that was rendered was under the SVG or MathML namespace and we create a component through `ViewContainerRef.create`, because the next template function hasn't run yet and it hasn't had the chance to update the namespace. The result is that the root node of the new component will retain the wrong namespace and may not end up rendering at all (e.g. if we're trying to show a `div` inside the SVG namespace). This issue has the potential to affect a lot of apps, because all components inserted through the router also go through `ViewContainerRef.create`.
PR Close#31232
These files have not been formatted properly, due to issues in the
`gulp format*` tasks. See previous commits (or #31295) for more details.
PR Close#31295
The Angular runtime frequently calls into user code (for example, when
writing to a property binding). Since user code can throw errors, calls to
it are frequently wrapped in a try-finally block. In Ivy, the following
pattern is common:
```typescript
enterView();
try {
callUserCode();
} finally {
leaveView();
}
```
This has a significant problem, however: `leaveView` has a side effect: it
calls any pending lifecycle hooks that might've been scheduled during the
current round of change detection. Generally it's a bad idea to run
lifecycle hooks after the application has crashed. The application is in an
inconsistent state - directives may not be instantiated fully, queries may
not be resolved, bindings may not have been applied, etc. Invariants that
the app code relies upon may not hold. Further crashes or broken behavior
are likely.
Frequently, lifecycle hooks are used to make assertions about these
invariants. When these assertions fail, they will throw and "swallow" the
original error, making debugging of the problem much more difficult.
This commit modifies `leaveView` to understand whether the application is
currently crashing, via a parameter `safeToRunHooks`. This parameter is set
by modifying the above pattern:
```typescript
enterView();
let safeToRunHooks = false;
try {
callUserCode();
safeToRunHooks = true;
} finally {
leaveView(..., safeToRunHooks);
}
```
If `callUserCode` crashes, then `safeToRunHooks` will never be set to `true`
and `leaveView` won't call any further user code. The original error will
then propagate back up the stack and be reported correctly. A test is added
to verify this behavior.
PR Close#31244
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31019
In ViewEngine injecting a Renderer2 returns a renderer that is specific to the particular component, however in Ivy we inject the renderer for the parent view instead. This causes it to set incorrect `ngcontent` attributes when creating elements through the renderer.
The issue comes from the fact that the `Renderer2` is created according to the current `LView`, but because DI happens before we've entered the `LView` of the component that's injecting the renderer, we end up with one that's one level up. We work around the issue by finding the `LView` that corresponds to the `previousOrParentTNode` inside of the parent view and associating the `Renderer2` with it.
This PR resolves FW-1382.
PR Close#31063
Previously, multiple ViewContainerRef instances (obtained by injecting
ViewContainerRef multiple times) each had private state that could be out of
sync with actual LContainer, if views were inserted/removed/queried across
the different instances. In particular each instance had its own array which
tracked ViewRefs inserted via that instance.
This commit moves the ViewRefs array onto the LContainer itself, so that it
can be shared across multiple ViewContainerRef instances. A test is added
that verifies ViewContainerRefs now provide a consistent view of the
container.
FW-1377 #resolve
PR Close#30985
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.
FW-1385 #resolve
PR Close#31131
Currently the `RecursiveAstVisitor` that is part of the template expression
parser does not _always_ properly pass through the context that can be
specified when visting a given expression. Only a handful of AST types
pass through the context while others are accidentally left out. This causes
unexpected and inconsistent behavior and basically makes the `context`
parameter not usable if the type of template expression is not known.
e.g. the template variable assignment migration currently depends on
the `RecursiveAstVisitor` but sometimes breaks if developers use
things like conditionals in their template variable assignments.
Fixes#31043
PR Close#31085
Currently the `placeholders` parameter inside `i18nLocalize` is defaulted to `{}`, which means that we'll always hit the `Object.keys` call below. Since it's very likely that we won't have placeholders in the majority of strings, these changes add an extra guard so that we don't hit it on every invocation.
PR Close#31106
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
When using `createEmbeddedView` after the creation of an ICU expression, the nodes for the current selected case were not reprojected (only the anchor comment node was moved to the new location).
Now we reproject correctly all the child nodes of an ICU expression when an anchor comment node is projected.
FW-1372 #resolve
PR Close#30979
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead
PR Close#30792
The DI's `locateDirectiveOrProvider` function operates on `TView` / `TNode`
data structures only so doesn't need to access `LView`. This refactoring
changes the argument list so the mentioned function takes less info to do
its work.
This refactoring is also mandatory for the upcoming query matching move
to TView.
PR Close#31006
Currently in Ivy we throw when attempting to destroy a `ComponentRef` that has been destroyed, however in ViewEngine we didn't which can cause some tests to break. These changes remove the error to match ViewEngine.
These changes resolve FW-1379.
PR Close#31022
To provide some context: The implicit receiver is part of the
parsed Angular template AST. Any property reads in bindings,
interpolations etc. read from a given object (usually the component
instance). In that case there is an _implicit_ receiver which can also
be specified explicitly by just using `this`.
e.g.
```html
<ng-template>{{this.myProperty}}</ng-template>
```
This works as expected in Ivy and View Engine, but breaks in case the
implicit receiver is not used for property reads. For example:
```html
<my-dir [myFn]="greetFn.bind(this)"></my-dir>
```
In that case the `this` will not be properly translated into the generated
template function code because the Ivy compiler currently always treats
the `ctx` variable as the implicit receiver. This is **not correct** and breaks
compatibility with View Engine. Rather we need to ensure that we retrieve
the root context for the standalone implicit receiver similar to how it works
for property reads (as seen in the example above with `this.myProperty`)
Note that this requires some small changes to the `expression_converter`
because we only want to generate the `eenextContent()` instruction if the
implicit receiver is _actually_ used/needed. View Engine determines if that is the case by recursively walking through the converted output AST and
checking for usages of the `o.variable('_co')` variable ([see here][ve_check]). This would work too for Ivy, but involves most likely more code duplication
since templates are isolated in different functions and it another pass
through the output AST for every template expression.
[ve_check]: 0d6c9d36a1/packages/compiler/src/view_compiler/view_compiler.ts (L206-L208)
Resolves FW-1366.
PR Close#30897
In a derived service class with no decorator (and therefore no factory) of
its own, the factory function of the base class will be used instead.
Previously this logic had a bug where the factory function would be called
with no arguments, which would incorrectly create an instance of the base
class.
This commit adds logic to call the base class' factory and pass the type of
the derived class, which will correctly construct an instance of the
derived class using the base class' factory. A test is also added to verify
correctness of this behavior.
PR Close#30855
Factory functions written by the compiler optionally allow an explicit type
to be passed. If called with this type, an instance of the given type will
be created instead of the type for which the factory was generated. This is
used to power inheritance of Angular types, as if the constructor of a class
is inherited from its superclass, then the factory function of the
superclass must be used (it has all the DI info) to construct an instance of
the derived class.
This commit adjusts typings in a few places to allow factory functions to be
called with this extra type parameter.
PR Close#30855
In older browsers such as IE10, inheritance of static properties on class
types is implemented by copying the properties. This makes hasOwnProperty
unreliable for checking if a static property is defined directly on a class
or is inherited. This causes problems when trying to read the
ngInjectableDef properties of inherited services, as in IE10 even inherited
definitions will appear to be local.
Instead, the 'token' property on ngInjectableDef can be leveraged to detect
when a definition is read which doesn't belong to the type itself.
PR Close#30855
The compiler generates a 'token' field when it emits an ngInjectableDef,
but this field was not required by defineInjectable or the InjectableDef
interface, nor was it added by InjectionToken.
This commit makes 'token' required and adds it where missing.
PR Close#30855
17d87d4e10 has been created before the changes
to the `@ViewChild` and `@ContentChild` decorators. Meaning that it still uses the queries
without the `static` flag. This results in failures in `master` because #30625 has been merged.
PR Close#30967
`TView.firstChild` was defined as the first node with index 0, but when we use runtime i18n then the instruction `i18nStart` can be the one with index 0 and the first node will be index 1 or more.
With this fix we set `TView.firstChild` when we see the first node with index 0 or later if `TView.firstChild` is still null.
FW-1367 #resolve
PR Close#30920
This work is being done ahead of changes to how view insertion is done in Ivy in accordance with [this design document](https://hackmd.io/Ae3W_2pOQlKouu9YNy1t6A?view).
The idea is to make sure we have acceptance tests ahead of that change.
PR Close#30625
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
The `renderStringify` function shows up pretty high in the CPU profiling.
Turns out that this function contained unnecessary `typeof` check for
function types - the check only makes sense / is used in error messages.
The PR also alligns how ivy and view engine stringify functions used in
interpolations.
PR Close#30838
In Ivy the `DebugNode.attributes` is populated directly from the DOM, but the problem is that the browser will lowercase all attribute names. These changes preserve the case by first going through the `TNode.attrs`, populating the map with the case-sensitive names and saving a reference to the lower case name. Afterwards when we're going through the attributes from the DOM, we can check whether we've mapped the attribute by its case-sensitive name already.
This PR resolves FW-1358.
PR Close#30864
A directive input that doesn't use a binding is triggered during the creation phase. But this was only executed at the first template pass, and not on subsequent ones.
Now only the creation of the update instruction is executed on the first template pass, anything else is executed every time a template is created.
FW-1361 #resolve
PR Close#30870
When translated content was projected, all of the content was reappended, even the placeholders that had been removed in the translation.
To avoid that we added a new flag on `TNode` that specifies that a node is detached, in which case it should be ignored by the projection.
FW-1319 #resolve
PR Close#30783
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
Added a new syntax for projections (`¤` will represent `ng-content` nodes) so that we can treat them specifically.
When we enter an i18n block with the instruction `i18nStart`, a new `delayProjection` variable is set to true to prevent the instruction `projection` from projecting the nodes. Once we reach the `i18nEnd` instruction and encounter a projection in the translation we will project its nodes.
If a projection was removed from a translation, then its nodes won't be projected at all.
The variable `delayProjection` is restored to `false` at the end of `i18nEnd` so that it doesn't stop projections outside of i18n blocks.
FW-1261 #resolve
PR Close#30782
We used to ignore empty strings for optimization purposes, but it turns out that empty strings are also valid values for ICU cases and we shouldn't ignore those.
FW-1290 #resolve
PR Close#30846
Some HTML attributes don't correspond to their DOM property name, in which
case the runtime will apply the appropriate transformation when assigning
a property using its attribute name. One example of this is the `for`
attribute, for which the DOM property is named `htmlFor`.
The type-checking machinery in ngtsc must also take this mapping into
account, as it generates type-check code in which unclaimed property bindings
are assigned to properties of (subtypes of) `HTMLElement`.
Fixes#30607
Fixes FW-1327
PR Close#30675
Before this change we would systematically call LQueries.clone() when executting
elementStart / elementContainerStart instructions. This was often unnecessary as
LQueries can be mutated under 2 conditions only:
- we are crossing an element that has directives with content queries
(new queries must be added);
- we are descending into element hierarchy (creating a child element of an existing element)
and the current LQueries object is tracking shallow queries (shallow queries are removed).
With this PR LQueires.clone() is only done when needed and this gratelly reduces number
of LQueries object created: in the "expanding rows" benchmark number of allocated
(and often GCed just after!) LQueries is reduced from ~100k -> ~35k. This represents
over 1MB of memory that is not allocated.
PR Close#30664
Projecting bare ICU expressions failed because we would assume that component's content nodes would be projected later and doing so at that point would be wasteful. But ICU nodes are handled independently and should be inserted immediately because they will be ignored by projections.
FW-1348 #resolve
PR Close#30696
Inside of `DebugNode.queryAll` we walk through all of the descendants of the node that we're querying against, however the logic that walks sideways through a node siblings also applies to the root node. This means that eventually we'll match against its nodes as well which will give us invalid results. These changes add an extra check to ensure that we aren't matching against the siblings of the root node.
This PR resolves FW-1353.
PR Close#30788
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
Currently with Ivy, `ModuleWithProvider` providers are processed in order
of declaration in the `NgModule` imports. This technically makes makes
sense but is a potential breaking change as `ModuleWithProvider` providers
are processed after all imported modules in View Engine.
In order to keep the behavior of View Engine, the `r3_injector` is updated
to no longer process `ModuleWithProvider` providers egarly.
Resolves FW-1349
PR Close#30688
The "async" around a couple tests was removed because of the merge conflict in one of the previous commits (80394ce08b). This change restores missing "async"s.
PR Close#30762
fix(@schematics/angular): TypeScript related migrations should cater for BOM
In the CLI `UpdateRecorder` methods such as `insertLeft`, `remove` etc.. accepts positions which are not offset by a BOM. This is because when a file has a BOM a different recorder will be used https://github.com/angular/angular-cli/blob/master/packages/angular_devkit/schematics/src/tree/recorder.ts#L72 which caters for an addition offset/delta.
The main reason for this is that when a developer is writing a schematic they shouldn't need to compute the offset based if a file has a BOM or not and is handled out of the box.
Example
```ts
recorder.insertLeft(5, 'true');
```
However this is unfortunate in the case if a ts SourceFile is used and one uses `getWidth` and `getStart` method they will already be offset by 1, which at the end it results in a double offset and hence the problem.
Fixes#30713
PR Close#30719
Two issues with DebugNode/DebugElement in Ivy were causing problems in user
tests.
1. The DebugNodes returned by Ivy were not actually instances of DebugNode.
This was due to an issue with the Ivy switch logic in debug_node.ts.
The declaration of the exported DebugNode reference was set to
`DebugNode__PRE_R3__ as any`. The cast prevented the Ivy switch transform
from detecting this as a switchable declaration. The transform cannot handle
arbitrary syntax, and exports *must* be of the form "const x = y__PRE_R3__;"
or they will not work. The cast to any in this case was not needed, so this
commit removes it.
2. DebugNodes returned by Ivy multiple times for the same element were not
reference-identical. This was previously considered a minor breaking change
in Ivy, but testing has shown that users depend on referential equality of
DebugNodes. This commit caches a DebugNode on a DOM node when first creating
it, to allow returning the same instance in subsequent operations.
PR Close#30756
Due to sanitization being stored as a temp/global value between
instructions, unit tests randomly failed because one test failed
to clean up its temporary value. This patch fixes this issue.
`i18nAttributes` instructions always occur after the element instruction. This means that we need to treat `i18n-` attributes differently.
By defining a specific `AttributeMarker` we can ensure that we won't trigger directive inputs with untranslated attribute values.
FW-1332 #resolve
PR Close#30402
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
Commit 0df719a46 introduced registration of NgModules with ids when compiled
with AOT, and f74373f2d corrected the timing to avoid issues with tree
shaking. Neither of these approaches were correct.
This commit fixes the timing to match View Engine and avoid tree shaking
issues, as well as fixes a bug with the registration of imported module ids.
A new Ivy-only test is added which verifies that modules get registered
correctly under real-world conditions.
PR Close#30706
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
Instead of linking to a markdown file explaining what the migration warnings
are about, we should link to the deprecation guide which now also contains
an entry for that schematic. This makes the deprecation explanations
consistent and more centralized.
PR Close#30702
This fixes a collision between #30639 and #30543 where the latter added
usages of @ViewChild without the static flag present, but the former
made the flag required.
PR Close#30666
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
This patch in the second runtime change which refactors how styling
bindings work in Angular. This patch refactors how map-based
`[style]` and `[class]` bindings work using a new algorithm which
is faster and less complex than the former one.
This patch is a follow-up to an earlier refactor which enabled
support for prop-based `[style.name]` and `[class.name]`
bindings (see f03475cac8).
PR Close#30543
This is a new feature of the Ivy TestBed.
A common user pattern is to test one component with another. This is
commonly done by creating a `TestFixture` component which exercises the
main component under test.
This pattern is more difficult if the component under test is declared in an
NgModule but not exported. In this case, overriding the module is necessary.
In g3 (and View Engine), it's possible to use an NgSummary to override the
recompilation of a component, and depend on its AOT compiled factory. The
way this is implemented, however, specifying a summary for a module
effectively overrides much of the TestBed's other behavior. For example, the
following is legal:
```typescript
TestBed.configureTestingModule({
declarations: [FooCmp, TestFixture],
imports: [FooModule],
aotSummaries: [FooModuleNgSummary],
});
```
Here, `FooCmp` is declared in both the testing module and in the imported
`FooModule`. However, because the summary is provided, `FooCmp` is not
compiled within the context of the testing module, but _is_ made available
for `TestFixture` to use, even if it wasn't originally exported from
`FooModule`.
This pattern breaks in Ivy - because summaries are a no-op, this amounts
to a true double declaration of `FooCmp` which raises an error.
Fixing this in user code is possible, but is difficult to do in an
automated or backwards compatible way. An alternative solution is
implemented in this PR.
This PR attempts to capture the user intent of the following previously
unsupported configuration:
```typescript
TestBed.configureTestingModule({
declarations: [FooCmp, TestFixture],
imports: [FooModule],
});
```
Note that this is the same as the configuration above in Ivy, as the
`aotSummaries` value provided has no effect.
The user intent here is interpreted as follows:
1) `FooCmp` is a pre-existing component that's being used in the test
(via import of `FooModule`). It may or may not be exported by this
module.
2) `FooCmp` should be part of the testing module's scope. That is, it
should be visible to `TestFixture`. This is because it's listed in
`declarations`.
This feature effectively makes the `TestBed` testing module special. It's
able to declare components without compiling them, if they're already
compiled (or configured to be compiled) in the imports. And crucially, the
behavior matches the first example with the summary, making Ivy backwards
compatible with View Engine for tests that use summaries.
PR Close#30578
Depending on which placeholders the translation uses, there are some legitimate cases where we might not use all placeholder replacements in `i18nPostprocess`. For example if some of the placeholders of the original messages have been removed in the translation.
FW-1312 #resolve
PR Close#30632
8479cb4233 updated the static-query migration
to refer to the new guide on AIO. Unfortunately these URLs are currently not
valid as the guide is only available on `next.angular.io` right now. In order to
make the link work permanently (e.g. if we eventually remove the guide in future
major versions), we use the permalink from the `v8` subdomain.
PR Close#30649
DEPRECATION:
Angular previously has supported an integration with the Web Tracing
Framework (WTF) for performance testing of Angular applications. This
integration has not been maintained and likely does not work for the
majority of Angular applications today. As a result, we are deprecating
the integration in Angular version 8.
This deprecation covers the following public APIs:
* `WtfScopeFn`
* `wtfCreateScope`
* `wtfStartTimeRange`
* `wtfEndTimeRange`
* `wtfLeave`
FW-1338 #resolve
PR Close#30642
Currently if a project has source-files with syntax failures and the migration
has been started on a broken project, we silently migrate *as much as possible*,
but never notify the developer that the project was in a broken state and that
he can re-run the migration after the failures are fixed.
Additionally the template strategy does not need to exit gracefully if it detects
Angular semantic diagnostics on generated files (template type checking). These
diagnostics are not relevant for the query timing analysis.
PR Close#30628
We are removing the prompt for the `static-query` migration and make the
template strategy the migration strategy for the migration. The usage
strategy is good for best-practices, but for now we want to ensure that
the migration is a seamless as possible and that is only achievable my
re-using the same logic that View Engine uses for determining the
timing of a query.
PR Close#30628
Prior to this change a component was considered unresolved (i.e. having dynamic resources that should be loaded, like external template or stylesheets) even if template override was provided as an empty string (for example, via TestBed.overrideTemplateUsingTestingModule call). This commit fixes the condition that previously treated empty string as an absent template value.
PR Close#30602
With Ivy, injecting a `ViewContainerRef` for a `<ng-container>` element
results in two comments generated in the DOM. One comment as host
element for the `ElementContainer` and one for the generated `LContainer`
which is needed for the created `ViewContainerRef`.
This is problematic as developers expect the same anchor element for
the `LContainer` and the `ElementContainer` in order to be able to move
the host element of `<ng-container>` without leaving the actual
`LContainer` anchor element at the original location.
This worked differently in View Engine and various applications might
depend on the behavior where the `ViewContainerRef` shares the anchor
comment node with the host comment node of the `<ng-container>`. For
example `CdkTable` from `@angular/cdk` moves around the host element of
a `<ng-container>` and also expects embedded views to be inserted next
to the moved `<ng-container>` host element.
See: f8be5329f8/src/cdk/table/table.ts (L999-L1016)
Resolves FW-1341
PR Close#30611
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
Currently we try to parse CLI workspace configurations gracefully by
using the native `JSON.parse()` method. This means that the CLI workspace
configuration needs to follow the strict JSON specification because otherwise
the migrations would not be able to find TypeScript configurations in the CLI
project where JSON5 workspace configurations are supported.
In order to handle such workspace configurations, we leverage the JSON
parsing logicfrom the `@angular-devkit/core` which is also used by the CLI.
PR Close#30582
PR #29290 introduced a new `TestBed.get` signature and deprecated the existing one.
This raises a lot of TSLint deprecation warnings in projects using a strict TS config (see #29905 for context), so we are temporarily removing the `@deprecated` annotation in favor of a plain text warning until we properly fix it.
Refs #29905
Fixes FW-1336
PR Close#30514
The `flatten` function used `concat` and `slice` which created a lot of intermediary
object allocations. Because `flatten` is used from query any benchmark which
used query would exhibit high minor GC counts.
PR Close#30468
BREAKING CHANGE
In PR #19558, we fixed a bug in `TestBed.overrideProvider` where
eager providers were not being instantiated correctly. However,
it turned out that since this bug had been around for quite a bit,
many apps were relying on the broken behavior where the providers
would not be instantiated. To assist in the transition, the
`TestBed.deprecatedOverrideProvider` method was temporarily
introduced to mimic the old behavior so that apps would have a
longer time period to migrate their code.
2 years and 3 versions later, it is time to remove the temporary
method. This commit removes `TestBed.deprecatedOverrideProvider`
altogether. Any usages of `TestBed.deprecatedOverrideProvider`
should be replaced with `TestBed.overrideProvider`. This may mean
that providers that were not created before will now be instantiated,
which could mean that your tests need to provide more mocks or stubs
for the dependencies of the newly instantiated providers.
PR Close#30576
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Moves all manual render3 view_container_ref tests that use property
bindings to acceptance tests with TestBed.
Two issues surfaced and refer to a difference between Ivy and View
engine:
* Multi-slot projection is not working with Ivy: FW-1331
* ViewContainerRef throws if index is invalid while View Engine clamped index: FW-1330
PR Close#30488
This is the first refactor PR designed to change how styling bindings
(i.e. `[style]` and `[class]`) behave in Ivy. Instead of having a heavy
element-by-element context be generated for each element, this new
refactor aims to use a single context for each `tNode` element that is
examined and iterated over when styling values are to be applied to the
element.
This patch brings this new functionality to prop-based bindings such as
`[style.prop]` and `[class.name]`.
PR Close#30469
Moves most of the tests from `render3/integration_spec` into `acceptance`. Note that there are still a handful of tests left in render3, because we don't have a way of moving all of them to go through `TestBed` since they either have r3-specific assertions or we don't have access to the same APIs as the raw instructions.
PR Close#30461
Ports render3 onDestroy tests over to be acceptance tests. Removes old render3 tests if possible.
Note the onlyInIvy test for one area where Ivy has a different behavior than ViewEngine
PR Close#30445
- Adds inheritance tests for many combinations of directive, component and bare class inheritance
- Adds tests that are failing in ivy, but should work, marks them with `xit` and a TODO.
- Removes render3 unit tests that cover the same things.
PR Close#30442
In View Engine, we would simply ignore host style bindings on template nodes. In Ivy,
we are throwing a "Cannot read length of undefined" error instead. For backwards
compatibility, we should also ignore these bindings rather than blowing up.
PR Close#30498
In View engine it is possible to instantiate a service that that has no
`@Injectable` decorator as long as it satisfies one of:
1) It has no dependencies and so a constructor with no parameters.
This is already supported in Ivy.
2) It has no constructor of its own and sub-classes a service which has
dependencies but has its own `@Injectable` decorator. This second
scenario was broken in Ivy.
In Ivy, previous to this commit, if a class to be instantiated did not have
its own `@Injectable` decorator and did not provide a constructor of
its own, then it would be created using `new` with no arguments -
i.e. falling back to the first scenario.
After this commit Ivy correctly uses the `ngInjectableDef` inherited
from the super-class to provide the `factory` for instantiating the
sub-class.
FW-1314
PR Close#30388
- Moves template ref tests from render3 unit tests to acceptance tests.
- Marks tests testing ivy specific changes as `onlyInIvy`.
- Deletes old render3 unit tests that are no longer necessary
PR Close#30443
Slightly improves the messages for the static-query migration in order
to make the terminal output less verbose but more helpful. Unfortunately
we are limited in what we can print due to the devkit not providing much
utilities for printing good messages from a migration schematic.
PR Close#30458
Currently if something fails in the selected strategy (e.g. AOT failures),
the migration currently accidentally falls back to the test strategy. This
is not helpful as we want to give developers the possibility to re-run
the migration after fixing potential AOT failures.
PR Close#30458
Apparently the devkit logger is not able to properly print
out error objects, so we need to convert them to a string
before in order to make the error visible to the user.
This is not testable without an e2e test that validates the CLI
terminal output.
PR Close#30458
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Moves most of the r3 change detection tests into `acceptance`. Notes:
* A handful of tests weren't migrated, because they were testing an API that isn't exposed publicly yet.
* The `should throw if bindings in children of current view have changed` and `should NOT throw if bindings in ancestors of current view have changed` tests were removed, because there's not nice way of hitting the same code path with `TestBed` and doing the same assertion as with the raw instructions. I'm open to ideas on how we could do them.
* There were a few tests that assert that the `innerHTML` looks in a particular way. I've switched them to use `textContent`, because Ivy and ViewEngine produce slightly different DOM. The tests were only checking whether the text has changed anyway.
PR Close#30425
Moves all manual render3 property binding tests to
TestBed acceptance tests. Unfortunately three property
binding tests could not be migrated as these rely on
manual Ivy template code that is not supported within
TestBed. These can be revisited as discussed in the
framework team meeting.
PR Close#30426
Moves all manual render3 tests which are located within the
`renderer_factory_spec.ts` file to acceptance tests. A few tests
that use Ivy-specific logic which is not replicable with `TestBed`
remain in the render3 folder (e.g. using `renderTemplate`)
Additionally migrated tests that assert the lifecycles of the
renderer_factory are set to *ivy only* as the lifecycle seems
to be different in Ivy. Tracked with: FW-1320
PR Close#30435
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
This commit moves the delegated constructor detection to a helper
function and also adds more test coverage.
The original code for this came from https://github.com/angular/angular/pull/24156
thanks to @ts2do.
Closes#24156Closes#27267
// FW-1310
PR Close#30368
Currently we always just set the timing to `false` if we aren't
able to analyze a given call expression or new expression. e.g.
```ts
ngOnInit() {
thirdPartyCallSync(() => this.query.doSomething())
}
```
In that case the `thirdPartyCallSync` function comes from the `node_modules`
and is only defined through types while there is no code for the
actual function logic that can be analyzed. This makes it impossible
to tell whether the given call expression actually causes the specified
arrow function to be executed synchronously or not. In order to be able
to make this better, we now peek into the passed arrow function and
check for a synchronous query usage. If so, we set the query timing to
static and mark it as ambiguous. This ensures that the usage strategy is
less "magical" and more correct with third-party code.
Additionally since functions like `setTimeout` are not analyzable but known
to be asynchronous, there is a hard-coded list of known functions which
shouldn't be marked as ambiguous.
Resolves FW-1214. As planned within https://hackmd.io/hPiLWpPlQ4uynC1luIBdfQ
PR Close#30215
Even though we don't run the size-tracking test on CI
right now, we update the golden size map as part of
the size-tracking tool update. The size-map difference
should generally be kept up-to-date to be able to
determine which PRs contribute size to a given file.
PR Close#30257
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
Misko Hevery
Paul Gschwendtner
Momin Khan
crisbeto
Judy Bogart
Pawel Kozlowski
Andrew Kushnir
nikz99
Joey Perrott
Olivier Combe
George Kalpakas
JoostK
Greg Magolan
Alan
Alex Rickabaugh
Umair Sarfraz
Santosh Yadav
Alex Eagle
Ben Lesh
cexbrayat
Umberto Tarantino
Vikram Subramanian
Tim Deschryver
Matias Niemelä
Kara Erickson
Filipe Silva
Pete Bacon Darwin
JiaLiPassion