There are many places where examples use just a string for the command
in outlets. When using nested outlets, we do not correctly handle
this case, as the types and algorithm always expect an array.
This PR updates the `createUrlTree` algorithm to account for the
possibility of a string literal as the command for an outlet.
Fixes#18928
PR Close#39728
The codebase currently contains two `getOutlet` functions,
and they can end up in the bundle of an application.
A recent commit 6fbe21941d tipped us off
as it introduced several `noop` occurrences in the golden symbol files.
After investigating with @petebacondarwin,
we decided to remove the duplicated functions.
This probably shaves only a few bytes,
but this commit removes the duplicated functions,
by always using the one in `router/src/utils/config`.
PR Close#39764
When there is a primary outlet present in the outlets map and the object is also prefixed
with some other commands, the current logic only uses the primary outlet and ignores
the others. This change ensures that all outlets are respected at the
segment level when prefixed with other commands.
PR Close#39456
This commit has a small refactor of some methods in create_url_tree.ts
and adds some test cases, including two that will fail at the moment but
should pass. A follow-up commit will make use of the refactorings to fix
the test with minimal changes.
PR Close#39456
The type of the `navigationExtras` param was accidetally changed to the wrong symbol
in 783a5bd7bb.
These changes revert it to the correct one.
PR Close#39347
As of Angular v4, four of the options for
`ExtraOptions#initialNavigation` have been deprecated. We intend
to remove them in v11. The final state for these options is:
`enabledBlocking`, `enabledNonBlocking`, and `disabled`. We plan
to remove and deprecate the remaining option in the next two
major releases.
New options:
- `enabledNonBlocking`: same as legacy_enabled
- `enabledBlocking`: same as enabled
BREAKING CHANGE:
* The `initialNavigation` property for the options in
`RouterModule.forRoot` no longer supports `legacy_disabled`,
`legacy_enabled`, `true`, or `false` as valid values.
`legacy_enabled` (the old default) is instead `enabledNonBlocking`
* `enabled` is deprecated as a valid value for the
`RouterModule.forRoot` `initialNavigation` option. `enabledBlocking`
has been introduced to replace it
PR Close#37480
Remove preserveQueryParams as it was deprecated for removal in v4, use
queryParamsHandling="preserve" instead.
BREAKING CHANGE: preserveQueryParams has been removed, use
queryParamsHandling="preserve" instead
PR Close#38762
This make it coherent with typing of Router.createUrlTree to which
those inputs are directly forwarded to. And hence it allow to pass
`undefined`, `null` or a value to the routerLink directive.
BREAKING CHANGE: in most cases this should not break, but if you were
accessing the values of `queryParams`, `fragment` or `queryParamsHandling`
you might need to relax the typing to also accept `undefined` and `null`.
Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com>
PR Close#39151
Previously, RouterTestingModule only assigned two of the options within ExtraOptions to the Router.
Now, it assigns the same options as RouterModule does (with the exception of enableTracing) via a
new shared function assignExtraOptionsToRouter.
Fixes#23347
PR Close#39096
In certain circumstances (errors during component constructor) the router outlet may not be activated before
redirecting to a new route. If the new route requires running guards and resolvers the current logic will throw
when accessing outlet.component due to an isActivated check within the property getter. This update brings the
logic inline with deactivateRouterAndItsChildren, namely checking outlet.isActivated before trying to access
outlet.component.
Fixes#39030
PR Close#39049
`router.navigateByUrl` and `router.createUrlTree` only use a subset of the `NavigationExtras`. This commit
changes the parameter type to use new interfaces that only specify the properties used by
those function implementations. `NavigationExtras` extends both of those interfaces.
Fixes#18798
BREAKING CHANGE: While the new parameter types allow a variable of type
`NavigationExtras` to be passed in, they will not allow object literals,
as they may only specify known properties. They will also not accept
types that do not have properties in common with the ones in the `Pick`.
To fix this error, only specify properties from the `NavigationExtras` which are
actually used in the respective function calls or use a type assertion
on the object or variable: `as NavigationExtras`.
PR Close#38227
We are changing the default value from 'legacy' to 'corrected' so that new
applications are automatically opted-in to the corrected behavior from #22394.
BREAKING CHANGE: This commit changes the default value of
`relativeLinkResolution` from `'legacy'` to `'default'`. If your
application previously used the default by not specifying a value in the
`ExtraOptions` and uses relative links when navigating from children of
empty path routes, you will need to update your `RouterModule` to
specifically specify `'legacy'` for `relativeLinkResolution`.
See https://angular.io/api/router/ExtraOptions#relativeLinkResolution
for more details.
PR Close#25609
The `createOrReuseChildren` function calls shouldReuseRoute with the
previous child values use as the future and the future child value used
as the current argument. This is incosistent with the argument order in
`createNode`. This inconsistent order can make it difficult/impossible
to correctly implement the `shouldReuseRoute` function. Usually this
order doesn't matter because simple equality checks are made on the
args and it doesn't matter which is which.
More detail can be found in the bug report: #16192.
Fix#16192
BREAKING CHANGE: This change corrects the argument order when calling
RouteReuseStrategy#shouldReuseRoute. Previously, when evaluating child
routes, they would be called with the future and current arguments would
be swapped. If your RouteReuseStrategy relies specifically on only the future
or current snapshot state, you may need to update the shouldReuseRoute
implementation's use of "future" and "current" ActivateRouteSnapshots.
PR Close#26949
This commit adds `ngDevMode` guard to throw some errors only in dev mode
The ngDevMode flag helps to tree-shake these error messages from production
builds (in dev mode everything will work as it works right now) to decrease
production bundle size.
PR Close#38674
This change contains the test from #38780 and also removes `defer` from
the `apply_redirects` logic because the change that introduced
`concatMap` instead of `map`...`concatAll` makes `defer` unnecessary.
PR Close#38781
In most browsers, clicking links with the Alt key has a special behavior, for example, Chrome
downloads the target resource. As with other modifier keys, the router should stop the original
navigation to avoid preventing the browser’s default behavior.
When users click a link while holding the Alt key together, the browsers behave as follows.
Windows 10:
| Browser | Behavior |
|:-----------|:--------------------------------------------|
| Chrome 84 | Download the target resource |
| Firefox 79 | Prevent navigation and therefore do nothing |
| Edge 84 | Download the target resource |
| IE 11 | No impact |
macOS Catalina:
| Browser | Behavior |
|:-----------|:--------------------------------------------|
| Chrome 84 | Download the target resource |
| Firefox 79 | Prevent navigation and therefore do nothing |
| Safari 13 | Download the target resource |
PR Close#38375
In general, the router only matches and loads a single Route config tree. However,
named outlets with empty paths are a special case where the router can
and should actually match two different `Route`s and ensure that the
modules are loaded for each match.
This change updates the "ApplyRedirects" stage to ensure that named
outlets with empty paths finish loading their configs before proceeding
to the next stage in the routing pipe. This is necessary because if the
named outlet has `loadChildren` but the associated lazy config is not loaded
before following stages attempt to match and activate relevant `Route`s,
an error will occur.
fixes#12842
PR Close#38379
In general, the router only matches and loads a single Route config tree. However,
named outlets with empty paths are a special case where the router can
and should actually match two different `Route`s and ensure that the
modules are loaded for each match.
This change updates the "ApplyRedirects" stage to ensure that named
outlets with empty paths finish loading their configs before proceeding
to the next stage in the routing pipe. This is necessary because if the
named outlet has `loadChildren` but the associated lazy config is not loaded
before following stages attempt to match and activate relevant `Route`s,
an error will occur.
fixes#12842
PR Close#38379
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38511
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38349
The `@HostListener` functions and lifecycle hooks aren't intended to be public API but
do need to appear in the `.d.ts` files or type checking will break. Adding the
nodoc annotation will correctly hide this function on the docs site.
Again, note that `@internal` cannot be used because the result would be
that the functions then do not appear in the `.d.ts` files. This would
break lifecycle hooks because the class would be seen as not
implementing the interface correctly. This would also break
`HostListener` because the compiled templates would attempt to call the
`onClick` functions, but those would also not appear in the `d.ts` and
would produce errors like "Property 'onClick' does not exist on type 'RouterLinkWithHref'".
PR Close#38448
When navigations coming from Angular router we may have a payload stored in state property. When this
exists, set extras's state to the payload.
PR Close#28176
Defer loading the wildcard module so that it is not loaded until
subscribed to. This fixes an issue where it was being eagerly loaded.
As an example, wildcard module loading should only occur after all other potential
matches have been exhausted. A test case for this was also added to
demonstrate the fix.
Fixes#25494
PR Close#38348
Previously, the `ngOnDestroy` method called `unsubscribe` regardless of if `subscription` had
been initialized. This can lead to an error attempting to call `unsubscribe` of undefined.
This change prevents this error, and instead only attempts `unsubscribe` when the subscription
has been defined.
PR Close#38344
This commit refactors Router package to move config utils to a separate file for better
organization and to resolve the problem with circular dependency issue.
Resolves#38212.
PR Close#38229
The current method of handling duplicate navigations caused by 'hashchange' and 'popstate' events for the same url change does not correctly handle cancelled navigations. Because `scheduleNavigation` is called in a `setTimeout` in the location change subscription, the duplicate navigations are not flushed at the same time. This means that if the initial navigation hits a guard that schedules a new navigation, the navigation for the duplicate event will not compare to the correct transition (because we inserted another navigation between the duplicates). See https://github.com/angular/angular/issues/16710#issuecomment-646919529Fixes#16710
PR Close#37674
In an effort to make angular documentation easier for users to read,
we are moving the router tutorial currently in router.md to a new file.
To support this change, we have done the following:
* Update files to fix any broken links caused by moving the file
* Updated the new file to follow tutorial guidelines
* Add the new file to the table of contents under, Tutorials.
PR Close#37979
CanLoad guards are processed in asynchronous manner with the following rules:
* If all guards return `true`, operator returns `true`;
* `false` and `UrlTree` values wait for higher priority guards to resolve;
* Highest priority `false` or `UrlTree` value will be returned.
`prioritizedGuardValue` uses `combineLatest` which in order subscribes to each Observable immediately (not waiting when previous one completes that `concatAll` do). So it makes some advantages in order to run them concurrently. Respectively, a time to resolve all guards will be reduced.
PR Close#37523
YuCheng Hu
YuCheng Hu
Zhicheng WANG
Marcono1234
Andrew Scott
cexbrayat
WilliamKoza
Thibaut ACKERMANN
Kristiyan Kostadinov
Adam
Joey Perrott
Andrew Kushnir
Adrien Crivelli
Zack Elliott
Zack Birkenbuel
Andrew Scott
Dirk Luijk
Marley Powell
Mathieu Lemoine
Sonu Kapoor
Popov Max
Yuhei Yasuda
Alan Agius
Misko Hevery
Anas Barghoud
Alexander Vologin
Zach Pomerantz
Dmitrij Kuba
Judy Bogart
David Shevitz 🔵
Ruben Schuckit