Previously when testing code injected the Compiler, it received the
top-level Compiler implementation defined in linker/compiler.ts
(and governed by the __PRE_R3__ switch). Code running under the
TestBed, however, should always use a TestBed-aware Compiler
implementation.
This commit adds such an implementation to the TestBedRender3,
which passes compiled modules through the _compileNgModule()
function.
With this change, 3 formerly disabled router integration tests
now pass.
FW-855 #resolve
PR Close#28033
An @NgModule with invalid provider declarations produces errors under
normal circumstances. However, within the TestBed two small issues with
provider overrides interfered with the correct production of these errors:
1. a 'null' provider object caused a premature crash when the TestBed
attempted to check for a 'provide' property on it with hasOwnProperty().
2. the array of providers would have an empty override array appended to it
for each input provider, which would pollute the error messages produced
down the line.
This commit fixes both of these issues, by 1) checking for null and 2)
filtering out the empty override arrays.
Testing strategy: future commits change the way the TestBed compiles
modules, causing tests to become sensitive to this bug if not fixed.
PR Close#28033
An @NgModule with an 'id' property has its type registered in a global map
of modules by id. This happens during compilation of the module.
In Ivy, modules are first compiled when the @NgModule decorator executes.
In tests, they might be passed again through the TestBed's compiler,
resulting in a second compilation and registration.
Before this fix, this second registration would cause an error, as the id
was previously registered. This commit makes the registration idempotent,
so if the same module type is being registered for the same id then no
error is thrown.
Testing strategy: future commits change the way the TestBed compiles
modules, causing tests to become sensitive to this bug if not fixed.
PR Close#28033
Changes:
- Change the project type to `service-worker`, so that it gets
appropriate `package.json` (with `@angular/service-worker` dependency)
and `angular.json` (with `serviceWorker: true` in production config).
- Move `ngsw-config.json` to the correct directory.
- Specify custom test commands for aio's `yarn example-e2e` to also
verify that the ServiceWorker bits are set up correctly.
PR Close#28020
Previously, cli-based docs examples were tested using `yarn e2e ...`. In
some cases, it might make sense to run different or additional checks
for a docs example (when running `yarn example-e2e` in `aio/`).
Currently, the only option is to define a custom project type and
overwrite the `e2e` yarn script in `package.json`. Doing so (in addition
to being cumbersome and verbose) would also end up in the `.zip` archive
that users can download to run the example locally. This would be
confusing, if these custom tests are specific to our CI needs.
This commit adds support for defining a custom list of commands per
example. These commands (if specified) would be run instead of the
default `yarn e2e ...`, when testing the docs examples on CI (via
`yarn example-e2e`).
(This feature will be used to verify that the
`service-worker-getting-started` example is set up correctly in a
subsequent commit, but can be useful in other cases as well.)
PR Close#28020
File overwrites:
- **angular.json**: Add `serviceWorker: true` to production config.
- **package.json**: Add `@angular/service-worker` to dependencies.
This will make any `service-worker` examples work out-of-the-box, when
downloading and running locally from the `.zip` archives.
PR Close#28020
In ESM5 decorated classes can be indicated by calls to `__decorate()`.
Previously the `ReflectionHost.findDecoratedClasses()` call would identify
helper calls of the form:
```
SomeClass = tslib_1.__decorate(...);
```
But it was missing calls of the form:
```
SomeClass = SomeClass_1 = tslib_1.__decorate(...);
```
This form is common in `@NgModule()` decorations, where the class
being decorated is referenced inside the decorator or another
member.
This commit now ensures that a chain of assignments, of any length,
is now identified as a class decoration if it results in a call to
`__decorate()`.
Fixes#27841
PR Close#27848
* Interface that a class can implement to be a guard deciding if a children can be loaded.
'...if a children...' changed to '...if children...'
* Interface that a class can implement to be a guard deciding if children can be loaded.
PR Close#27894
This change matches the routes found in the following code example
for auth.guard.ts as well as the login.component.1.ts in the "Add
the LoginComponent" section.
PR Close#27879
Previously, we had the logic to schedule a change detection tick
inside markViewDirty(). This is fine when used in markDirty(),
the user-facing API, because it should always schedule change
detection. However, this doesn't work when used in markForCheck()
because historically markForCheck() does not trigger change
detection.
To be backwards compatible, this commit moves the scheduling
logic out of markViewDirty() and into markDirty(), so
markForCheck no longer triggers a tick.
PR Close#28048
Libraries that create components dynamically using component factories,
such as `@angular/upgrade` need to pass blocks of projected content
through to the `ComponentFactory.create()` method. These blocks
are extracted from the content by matching CSS selectors defined in
`<ng-content select="..">` tags found in the component's template.
The Angular compiler collects these CSS selectors when compiling a component's
template, and exposes them via the `ComponentFactory.ngContentSelectors`
property.
This change ensures that this property is filled correctly when the
component factory is created by compiling a component with the Ivy engine.
PR Close#27867
When a pipe returns an instance of WrappedValue we should "invalidate" value
of a binding where the pipe in question is used.
Before this change we've always wrtten the invalidation value (NO_CHANGE) to
the binding root this invalidating the first binding in a LView. This commit
corrects the binding index calculation so the binding with a pipe is invalidated.
PR Close#28044
Previous to this change, there was a lot of noise when
trying to find tests in FIND_PASSING_TESTS mode because
tests marked "onlyInIvy" were also listed as "already
passing". Since these tests are not "fixmes" that need
to be enabled, it is not useful to have them listed.
This commit removes "onlyInIvy" tests from consideration
when running in this manual mode. The tests should still
run on CI by default (since FIND_PASSING_TESTS mode will
be false).
PR Close#28036
There are various e2e tests with the `_spec.ts` suffix in the Angular project. Currently the protractor Bazel rule does not pick up these files and just ignores them. Since underscore is commonly used, we should support this.
Needed for the conversion fo the `examples` to Bazel.
PR Close#28022
Prior to this change Component decorator was resolving `encapsulation` value a bit incorrectly, which resulted in `encapsulation: NaN` in compiled code. Now we resolve the value as Enum memeber and throw if it's not the case. As a part of this update, the `changeDetection` field handling is also added, the resolution logic is the same as the one used for `encapsulation` field.
PR Close#27971
exportAs in @Directive metadata supports multiple values, separated by
commas. Previously it was treated as a single value string.
This commit modifies the compiler to understand that exportAs is a
string[]. It stops short of carrying the multiple values through to the
runtime. Instead, it only emits the first one. A future commit will modify
the runtime to accept all the values.
PR Close#28001
Generated factory shims can import from @angular/core. However, we have
special logic in place to rewrite self-imports when generating code for
@angular/core.
This commit leverages the new standalone ImportRewriter interface to
properly rewrite imports in generated factory shims. Before this fix,
a generated factory file for core would look like:
```typescript
import * as i0 from './r3_symbols';
export var ApplicationModuleNgFactory = new ɵNgModuleFactory(...);
```
This is invalid, as ɵNgModuleFactory is just NgModuleFactory when imported
via r3_symbols.
FW-881 #resolve
PR Close#27998
Currently the ImportManager class handles various rewriting actions of
imports when compiling @angular/core. This is required as code compiled
within @angular/core cannot import from '@angular/core'. To work around
this, imports are rewritten to get core symbols from a particular file,
r3_symbols.ts.
In this refactoring, this rewriting logic is moved out of the ImportManager
and put behind an interface, ImportRewriter. There are three implementers
of the interface:
* NoopImportRewriter, used for compiling all non-core packages.
* R3SymbolsImportRewriter, used when ngtsc compiles @angular/core.
* NgccFlatImportRewriter, used when ngcc compiles @angular/core (special
logic is needed because ngcc has to rewrite imports in flat bundles
differently than in non-flat bundles).
This is a precursor to using this rewriting logic in other contexts besides
the ImportManager.
PR Close#27998
Project created by @angular/cli depends on Bazel at build time and
we should not assume that Bazel is available globally.
Instead, the project should specify an explicit dev dependency on
`@bazel/bazel`.
PR Close#28032
TestBed used to have its own implementation of the `transitiveScopesFor` function, customized for TestBed needs (to compile NgModules). This change unifies the `transitiveScopesFor` function usage by importing it from the `jit/module.ts` script and adding extra argument to configure its behavior (how to compile NgModule), so that TestBed can leverage it.
PR Close#27860
These tests validate the ability of the View Engine TestBed to consume
summary metadata, a mechanism which allows the TestBed to use
AOT-compiled components & directives in tests. It achieves this through
two operations which are independently obsolete in Ivy:
1. It injects CompileMetadataResolver, a View Engine specific compiler
internal class which extracts global analysis metadata from classes,
and uses it to construct summary metadata. This happens in a
beforeEach() block which calls createSummaries().
2. It uses TestBed.initTestEnvironment to pass summary metadata to the
TestBed itself. Any such metadata is ignored in Ivy.
Operation #1 makes it impossible to run these tests under Ivy, as the
CompileMetadataResolver is not available with an Ivy compiler.
Ivy itself does not rely on summary data, and the R3TestBed can depend
directly on AOT compiled components without it. Thus, the spirit of thes
tests is obsolete in an Ivy world.
FW-838 #resolve
PR Close#28027
Previously the canInsertNativeNode and getRenderParent functions had almost
_exaclty_ the same logic. What was worse that getRenderParent was calling
canInsertNativeNode thus executing the same, non-trivial logic twice.
This commit merges canInsertNativeNode and getRenderParent into one function.
Now getRenderParent will return a native parent or null if a node can't be
inserted (content projection, root of a view that is not inserted etc.).
PR Close#28011
Alex Rickabaugh
George Kalpakas
Igor Minar
Adam Plumer
Judy Bogart
Pete Bacon Darwin
Kapunahele Wong
Pawel Kozlowski
Matias Niemelä
Karanveer Plaha
Joseph Harrison-Lim
Mark Goho
Johannes Hoppe
Teamop
Kristiyan Kostadinov
Keen Yee Liau
Misko Hevery
Suguru Inatomi
Kara Erickson
Paul Gschwendtner
Marc Laval
Andrew Kushnir