Several new functionalities are possible with this change: the most requested is that callers can now check whether a control has a required validator. Other uses include incrementally changing the validators set without doing an expensive operation to reset all validators.
Closes#13461.
PR Close#42838
If the validator is bound to be `null` then no validation occurs and
attribute is not added to DOM.
For every validator type different PR will be raised as discussed in
https://github.com/angular/angular/pull/42378.
Closes#42267.
PR Close#42565
When a FormControl, FormArray, or FormGroup is first constructed, if an async validator is attached, the `statusChanges` observable should receive a message when the validator complete (i.e. pending -> valid/invalid). If the validator was provided as part of the constructor options, it was not fired at construction time, which is fixed in this PR.
Fixes#35309.
PR Close#42553
As previously discussed in pull/31070 and issues/30486, this would be useful because it is often desirable to apply styles to fields that are both `ng-invalid` and `ng-pristine` after the first attempt at form submission, but Angular does not provide any simple way to do this (although evidently Angularjs did). This will now be possible with a descendant selector such as `.ng-submitted .ng-invalid`.
In this implementation, the directive that sets control status classes on forms and formGroups has its set of statuses widened to include `ng-submitted`. Then, in the event that `is('submitted')` is invoked, the `submitted` property of the control container is returned iff it exists. This is preferred over checking whether the container is a `Form` or `FormGroup` directly to avoid reflecting on those classes.
Closes#30486.
PR Close#42132.
This reverts commit 00b1444d12, undoing the rollback of this change.
PR Close#42132
Switches the repository to TypeScript 4.3 and the latest
version of tslib. This involves updating the peer dependency
ranges on `typescript` for the compiler CLI and for the Bazel
package. Tests for new TypeScript features have been added to
ensure compatibility with Angular's ngtsc compiler.
PR Close#42022
As previously discussed in pull/31070 and issues/30486, this would be useful because it is often desirable to apply styles to fields that are both `ng-invalid` and `ng-pristine` after the first attempt at form submission, but Angular does not provide any simple way to do this (although evidently Angularjs did). This will now be possible with a descendant selector such as `.ng-submitted .ng-invalid`.
In this implementation, the directive that sets control status classes on forms and formGroups has its set of statuses widened to include `ng-submitted`. Then, in the event that `is('submitted')` is invoked, the `submitted` property of the control container is returned iff it exists. This is preferred over checking whether the container is a `Form` or `FormGroup` directly to avoid reflecting on those classes.
Closes#30486.
PR Close#42132
Prior to this change the `min` and `max` validator directives would not
set the `min` and `max` attributes on the host element. The problem was
caused by the truthy check in host binding expression that was
calculated as `false` when `0` is used as a value. This commit updates
the logic to leverage nullish coalescing operator in these host binding
expressions, so `0` is treated as a valid value, thus the `min` and
`max` attributes are set correctly.
Partially closes#42267
PR Close#42412
We have some internal proxies for all of the Jasmine functions, as well as some other helpers. This code hasn't been touched in more than 5 years, it can lead to confusion and it isn't really necessary since the same can be achieved using Jasmine.
These changes remove most of the code and clean up our existing unit tests.
PR Close#42177
The Validator and AsyncValidator interfaces provide a callback, `registerOnValidatorChange(fn)`. `registerOnValidatorChange` is supposed to be fired at least once to register `fn` with the validator. `fn` is then called by the validator whenever its inputs change. This was previously not happening for FormGroup validators, and is now fixed.
PR Close#41971
Currently the code in the `FormGroupDirective` assumes that the shape of the underlying `FormGroup` never
changes and `FormControl`s are not replaced with other types. In practice this is possible and Forms code
should be able to process such changes in FormGroup shape.
This commit adds extra check to the `FormGroupDirective` class to avoid applying FormControl-specific to
other types.
Fixes#13788.
PR Close#40829
This commit adds the `emitEvent` option to the following FormArray and FormGroup methods:
* FormGroup.addControl
* FormGroup.removeControl
* FormGroup.setControl
* FormArray.push
* FormArray.insert
* FormArray.removeAt
* FormArray.setControl
* FormArray.clear
This option can be used to prevent an event from being emitted when adding or removing controls.
BREAKING CHANGE:
The `emitEvent` option was added to the following `FormArray` and `FormGroup` methods:
* FormGroup.addControl
* FormGroup.removeControl
* FormGroup.setControl
* FormArray.push
* FormArray.insert
* FormArray.removeAt
* FormArray.setControl
* FormArray.clear
If your app has custom classes that extend `FormArray` or `FormGroup` classes and override the
above-mentioned methods, you may need to update your implementation to take the new options into
account and make sure that overrides are compatible from a types perspective.
Closes#29662.
PR Close#31031
This commit adds the missing `min` and `max` validators.
BREAKING CHANGE:
Previously `min` and `max` attributes defined on the `<input type="number">`
were ignored by Forms module. Now presence of these attributes would
trigger min/max validation logic (in case `formControl`, `formControlName`
or `ngModel` directives are also present on a given input) and
corresponding form control status would reflect that.
Fixes#16352
PR Close#39063
Prior to this commit, the `patchValue()` of the `FormGroup` and `FormArray` classes used to throw an exception
when the `value` argument contained a data structure that has `null` or `undefined` as a value for a field
that represents an instance of `FormGroup` or `FormArray` (for `FormControl` it's not a problem, since it
doesn't have nested controls), since the `patchValue()` method tried to iterate over provided values to
match current data structure.
This commit updates the `patchValue()` logic in `FormGroup` and `FormArray` classes to just ignore `null` and
`undefined` values (without any changes to corresponding `FormGroup` and `FormArray` instances). This
behavior looks inline with the `patchValue()` method goal of "doing its best to match the values to the
correct controls" (quote from docs).
Fixes#36672.
Fixes#21021.
PR Close#40534
PR #39235 introduced additional cleanup logic for form controls and directives. The cleanup logic relies
on the presence of ControlValueAccessor instances on FormControlName and FormControl directives. In general
these fields are present and there are also checks to make sure that the mentioned directive instances are
created with CVAs. However some scenarios (primarily tests) may invoke the logic in a way that the directive
instance would not be fully initialized, thus causing CVA to be absent. As a result, the cleanup logic fails
while trying to call some methods on associated CVA instances.
This commit updates the cleanup logic to take into account the situation when CVA is not present.
Fixes#40521.
PR Close#40526
When a form is reset, it goes through `_forEachChild` to call `reset` on each of its children.
The problem is that if a control is removed while the loop is running (e.g. by a subscription),
the form will throw an error, because it built up the list of available control before the loop
started.
These changes fix the issue by adding a null check before invoing the callback.
Fixes#33401.
PR Close#40462
The `NgControlStatusGroup` directive is shared between template-driven and reactive form modules. In cases when
only reactive forms module is present, the `NgControlStatusGroup` directive is still activated on all `<form>`
elements, but if there is no other reactive directive applied (such as `formGroup`), corresponding `ControlContainer`
token is missing, thus causing exceptions (since `NgControlStatusGroup` directive relies on it to determine the
status). This commit updates the logic to handle the case when no `ControlContainer` is present (effectively making
directive logic a noop in this case).
Alternative approach (more risky) worth considering in the future is to split the `NgControlStatusGroup` into
2 directives with different set of selectors and include them into template-driven and reactive modules separately.
The downside is that these directives might be activated simultaneously on the same element (e.g. `<form>`),
effectively doing the work twice.
Resolves#38391.
PR Close#40344
Prior to this commit, removing `FormControlDirective` and `FormGroupName` directive instances didn't clear
the callbacks previously registered on FromControl/FormGroup class instances. As a result, these callbacks
were executed even after `FormControlDirective` and `FormGroupName` directive instances were destroyed. That was
also causing memory leaks since these callbacks also retained references to DOM elements.
This commit updates the cleanup logic to take care of properly detaching FormControl/FormGroup/FormArray instances
from the view by removing view-specific callback at destroy time.
Closes#20007, #37431, #39590.
PR Close#39235
The value of a `FormControl` is treated in a special way (called boxed values) when it's an object with exactly
2 fields: `value` and `disabled`. This commit adds a test which verifies that an object is not treated as a boxed
value when `disabled` field is present, but `value` is missing.
PR Close#39801
Currently when an instance of the `FormControlName` directive is destroyed, the Forms package invokes
the `cleanUpControl` to clear all directive-specific logic (such as validators, onChange handlers,
etc) from a bound control. The logic of the `cleanUpControl` function should revert all setup
performed by the `setUpControl` function. However the `cleanUpControl` is too aggressive and removes
all callbacks related to the onChange and disabled state handling. This is causing problems when
a form control is bound to multiple FormControlName` directives, causing other instances of that
directive to stop working correctly when the first one is destroyed.
This commit updates the cleanup logic to only remove callbacks added while setting up a control
for a given directive instance.
The fix is needed to allow adding `cleanUpControl` function to other places where cleanup is needed
(missing this function calls in some other places causes memory leak issues).
PR Close#39623
Prior to this commit, the `cleanUpControl` function (responsible for cleaning up control instance)
was not taking validators into account. As a result, these validators remain registered on a detached
form control instance, thus causing memory leaks. This commit updates the `cleanUpControl` function
logic to also run validators cleanup.
As a part of this change, the logic to setup and cleanup validators was refactored and moved to
separate functions (with completely opposite behavior), so that they can be reused in the future.
This commit doesn't add the `cleanUpControl` calls to all possible places, it just fixes the cases
where this function is being called, but doesn't fully perform a cleanup. The `cleanUpControl`
function calls will be added to other parts of code (to avoid more memory leaks) in a followup PR.
PR Close#39234
This commit refactors validators-related logic that is common across most of the directives.
A couple notes on this refactoring:
* common logic was moved to the `AbstractControlDirective` class (including `validator` and
`asyncValidator` getters)
* sync/async validators are now composed in `AbstractControlDirective` class eagerly when validators
are set with `_setValidators` and `_setAsyncValidators` calls and the result is stored in directive
instance (thus getters return cached versions of validator fn). This is needed to make sure composed
validator function remains the same (retains its identity) for a given directive instance, so that
this function can be added and later removed from an instance of an AbstractControl-based class
(like `FormControl`). Preserving validator function is required to perform proper cleanup (in followup
PRs) of the AbstractControl-based classes when a directive is destroyed.
PR Close#38280
Prior to this change, the `validators` and `asyncValidators` fields of a few Forms directives
were typed as `any[]`. This commit updates the types and makes them consistent for all directives
in the Forms package.
BREAKING CHANGE:
Directives in the `@angular/forms` package used to have `any[]` as a type of `validators` and
`asyncValidators` arguments in constructors. Now these arguments are properly typed, so if your
code relies on directive constructor types it may require some updates to improve type safety.
PR Close#38944
This commit ensures that the `updateValueAndValidity` method takes the
`asyncValidator` into consideration to emit on the `statusChanges` observables.
This is necessary so that any subsequent changes are emitted properly to any
subscribers.
Closes#20424Closes#14542
BREAKING CHANGE:
Previously if FormControl, FormGroup and FormArray class instances had async validators
defined at initialization time, the status change event was not emitted once async validator
completed. After this change the status event is emitted into the `statusChanges` observable.
If your code relies on the old behavior, you can filter/ignore this additional status change
event.
PR Close#38354
This commit performs minor refactoring in Forms package to get rid of duplicate functions.
It looks like the functions were duplicated due to a slightly different type signatures, but
their logic is completely identical. The logic in retained functions remains the same and now
these function also accept a generic type to achieve the same level of type safety.
PR Close#38371
A util file is added to forms test package:
- it exposes simpleAsyncValidator, asyncValidator and asyncValidatorReturningObservable validators
- it refactors simpleAsyncValidator and asyncValidator to use common promise creation code
- it exposes currentStateOf allowing to get the validation state of a list of AbstractControl
Closes#37831
PR Close#38020
This commit refactors the way we store validators in AbstractControl-based classes:
in addition to the combined validators function that we have, we also store the original list of validators.
This is needed to have an ability to clean them up later at destroy time (currently it's problematic since
they are combined in a single function).
The change preserves backwards compatibility by making sure public APIs stay the same.
The only public API update is the change to the `AbstractControl` class constructor to extend the set
of possible types that it can accept and process (which should not be breaking).
PR Close#37881
Previously, `registerOnChange` used `hasOwnProperty` to identify if the
property is supported. However, this does not work as the `selectedOptions`
property is an inherited property. This commit fixes this by verifying
the property on the prototype instead.
Closes#37433
PR Close#37620
introduce a boolean to track form groups/arrays own pending async validation to distinguish between pending state due to children and pending state due to own validation
Fixes#10064
PR Close#22575
Prior to this commit, number input fields would to fire valueChanges twice: once for `input` events when typing and second for the `change` event when the field lost focus (both events happen at once when using the increment and decrement buttons on the number field).
Fixes#12540
BREAKING CHANGE: Number inputs no longer listen to the `change` event.
* Tests which trigger `change` events need to be updated to trigger `input` events instead.
* The `change` event was in place to support IE9, as we found that `input` events were not fired with backspace or cut actions. If you need to maintain IE9 support, you will need to add a change event listener to number inputs and call the `onChange` method of `NumberValueAccessor` manually.
* Lastly, old versions of WebDriver would synthetically trigger the `change` event on `WebElement.clear` and `WebElement.sendKeys`. If you are using an old version of WebDriver, you may need to update tests to ensure `input` events are triggered. For example, you could use `element.sendKeys(Keys.chord(Keys.CONTROL, "a"), Keys.BACK_SPACE);` in place of `element.clear()`.
PR Close#12540
PR Close#36087
Previously, the behavior of the `minLength` and `maxLength` validators
caused confusion, as they appeared to work with numeric values but
did not in fact produce consistent results. This commit fixes the issue
by skipping validation altogether when a numeric value is used.
BREAKING CHANGES:
* The `minLength` and `maxLength` validators now verify that a value has
numeric `length` property and invoke validation only if that's the case.
Previously, falsey values without the length property (such as `0` or
`false` values) were triggering validation errors. If your code relies on
the old behavior, you can include other validators such as [min][1] or
[requiredTrue][2] to the list of validators for a particular field.
[1]: https://angular.io/api/forms/Validators#min
[2]: https://angular.io/api/forms/Validators#requiredTrueCloses#35591
PR Close#36157
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
Dylan Hunn
iRealNirmal
Paul Gschwendtner
Jessica Janiuk
Kristiyan Kostadinov
Andrew Kushnir
Michael Jerred
Sonu Kapoor
Krivokhizhin Anton
JiaLiPassion
Oussama Ben Brahim
Joey Perrott
Alan Agius
Tidi
Greg Magolan
atscott