Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
This reverts commit 00f3c58bb9.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
This is a follow up to #35637 which resolved a similar issue for `ComponentFactoryResolver`, but not the root cause. When a `NgModuleRef` is created, it instantiates an `Injector` internally which in turn resolves all of injector types. This can result in a circular call that results in an error, because the module is one of the injector types being resolved.
These changes work around the issue by allowing the constructor to run before resolving the injector types.
Fixes#35677.
Fixes#35639.
PR Close#35731
Before this change ngIvy implementation of queries would throw upon
encountering null / undefined query result collected from an embedded
view. It turns out that we might have a provider that explicitly provides
a null / undefined value in a place of a token queried for.
This commit removes a check from the ngIvy query implementation that was
asserting on a query result to be defined.
Fixes#35673
PR Close#35796
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
This commit extends the range of tNode types that may have local refs to include `TNodeType.Container` to account for `<ng-template>`s. Original changes in https://github.com/angular/angular/pull/33415 didn't include that type and as a result, an error is thrown at runtime in case an i18n block contains an `<ng-template>` with local refs.
PR Close#35758
If an injectable has a `useClass`, Ivy injects the token in `useClass`, rather than the original injectable, if the injectable is re-provided under a different token. The correct behavior is that it should inject the re-provided token, no matter whether it has `useClass`.
Fixes#34110.
PR Close#34574
When binding to `[style]` we correctly sanitized/unwrapped properties but we did not do it for the object itself.
```
@HostBinding("style")
style: SafeStyle = this.sanitizer.bypassSecurityTrustStyle(
"background: red; color: white; display: block;"
);
```
Above code would fail since the `[style]` would not unwrap the `SafeValue` and would treat it as object resulting in incorrect behavior.
Fix#35476 (FW-1875)
PR Close#35564
Currently we resolve the `NgModuleRef.componentFactoryResolver` by going through the injector, but the problem is that `ComponentFactoryResolver` has a dependency on `NgModuleRef`, which means that if the module that's attached to the ref tries to inject `ComponentFactoryResolver` in its constructor, we'll create a circular dependency which throws at runtime.
These changes resolve the issue by creating the `ComponentFactoryResolver` manually ahead of time without going through the injector. We can do this safely, because the only dependency for the resolver is the current module ref which is providing it.
Aside from fixing the issue, another advantage to this approach is that it should reduce the amount of generated JS, because it removes a getter and a provider definitio.
Fixes#35580.
PR Close#35637
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
In View Engine, host element of dynamically created component received attributes and classes extracted from component's selector. For example, if component selector is `[attr] .class`, the `attr` attribute and `.class` class will be add to host element. This commit adds similar logic to Ivy, to make sure this behavior is aligned with View Engine.
PR Close#34481
Before this change content queries with the `descendants: false` option, as implemented in ivy,
would not descendinto `<ng-container>` elements. This behaviour was different from the way the
View Engine worked. This change alligns ngIvy and VE behaviours when it comes to queries and the
`<ng-container>` elements and fixes a common bugs where a query target was placed inside the
`<ng-container>` element with a * directive on it.
Before:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node would NOT match -->
</ng-container>
</needs-target>
```
After:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node WILL match -->
</ng-container>
</needs-target>
```
Fixes#34768
PR Close#35384
When the same provider is resolved multiple times on the same node, the first invocation had the correct context, but all subsequent ones were incorrect because we were registering the hook multiple times under different indexes in `destroyHooks`.
Fixes#35167.
PR Close#35249
Currently the logic that handles ICUs located outside of i18n blocks may throw exceptions at runtime. The problem is caused by the fact that we store incorrect TNode index for previous TNode (index that includes HEADER_OFFSET) and do not store a flag whether this TNode is a parent or a sibling node. As a result, the logic that assembles the final output uses incorrect TNodes and in some cases throws exceptions (when incompatible structure is extracted from tView.data due to the incorrect index). This commit adjusts the index and captures whether TNode is a parent to make sure underlying logic manipulates correct TNode.
PR Close#35347
Given:
```
<div class="s1" [class]="null" [ngClass]="exp">
```
Notice that `[class]` binding is not a `string`. As a result the existing logic would not concatenate `[class]` with `class="s1"`. The resulting falsy value would than be sent to `ngClass` which would promptly clear all styles on the `<div>`
The new logic correctly handles falsy values for `[class]` bindings.
Fix#35335
PR Close#35350
In the `loadRenderer` we make an assumption that the value will always be an `LView`, but if there's a directive on the same node which injects `ViewContainerRef` the `LView` will be wrapped in an `LContainer`. These changes add a call to unwrap the value before we try to read the value off of it.
Fixes#35342.
PR Close#35343
Prior to this change, element namespace was not set for host elements of dynamically created components that resulted in incorrect rendering in a browser. This commit adds the logic to pick and set correct namespace for host element when component is created dynamically.
PR Close#35136
Inside `*ngFor` the second run of the styling instructions can get into situation where it tries to read a value from a binding which has not yet executed. As a result the read is `NO_CHANGE` value and subsequent property read cause an exception as it is of wrong type.
Fix#35118
PR Close#35133
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Andrew Kushnir
Andrew Scott
crisbeto
Pawel Kozlowski
Miško Hevery
zhuyujie
Greg Magolan
Paul Gschwendtner
atscott