The Material units tests job has been disabled with the
typescript upgrade PR since the components repository was
still on an old TypeScript version (due to cyclic dependencies
between the framework and components repository).
Since the components repository has been updated to `9.0.0-next.15`
and now uses the compatible TypeScript version, we can re-enable
ds
Related to this change, we need to ignore the `package.json`
engines when installing the dependencies of the components repo. This
is because the components repo already updated to NodeJS v12 and Yarn
v1.19.1. This is not the case for the CI setup of framework. For now,
since we don't want to change the dev setup (as it slows down
development), we temporarily disable the engines.
Additionally, the material unit tests job now depends on the actual
release packages (not on the ngtsc compiled ones). This is because
the components repo setup relies on NGCC being run. This is also
helpful for validating ngcc against the framework packages.
PR Close#33530
Previously, when one wanted to try out the changes from a PR before it
was merged, they had to check out the PR locally and build the Angular
packages themselves (which is time-consuming and wasteful given that the
packages have already been built on CI).
This commit persists all Angular packages on each build as `.tgz` files,
which can be used to install dependencies on an project (supported by
both [npm][1] and [yarn][2]). In addition to individual `.tgz` files for
each package, a `.tgz` file including all packages is also stored, which
can be used to test the packages locally by overwriting the ones in the
`node_modules/` directory of a project.
CircleCI [build artifacts][3] an be used for longer-term storage of the
outputs of a build and are designed to be useful around the time of the
build, which suits our needs.
[1]: https://docs.npmjs.com/cli/install.html
[2]: https://yarnpkg.com/lang/en/docs/cli/add
[3]: https://circleci.com/docs/2.0/artifacts
PR Close#33321
Updates the commit of the Angular components repository for
which the `material-unit-tests` job runs tests against. We need to
update to the latest commit at the time of writing, in order to be able
to remove the gesture tests from the material-ci/blocklist.
This is now possible because the Angular components repository
removes the dependency on `hammerjs` completely.
PR Close#33221
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
The components repository updated to rules_nodejs#0.38.2 before Angular Bazel did.
To do this, the `@angular/bazel` v0.38.2 compatibility changes were patched on postinstall.
This now conflicts because we install a `@angular/bazel` version in the `material-unit-tests` job
that already includes these compatibility changes. This would result in the patch being a noop
for which the `patch` command throws an error.
We can remove this once components can install a released version of `@angular/bazel` that is
compatible with `rules_nodejs#0.38.2`.
PR Close#33073
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
We need to update to a version where components already
updated to `rules_nodejs#0.38.0`.
PR Close#32889
The `init_environment` custom command is used in almost all other jobs.
The this is implemented in CircleCI is that the steps of the command are
inlined into the other jobs.
Some of the `init_environment` commands are quite long and (since the
default display name for a step is its command) they clutter the
CircleCI UI. Additionally, multiple related commands are shown as
separate steps, which makes it more difficult to get to the actual steps
of a job.
This commit improves this by:
1. Defining explicit, short names for steps with long commands.
2. Grouping multiple related steps into one.
PR Close#32998
The angular.io project uses Angular and CLI v9, which by default turns
on Ivy mode. However, since ec4381dd4, we explicitly opt out of Ivy.
This commit removes the `enabledIvy: false` configuration, thus allowing
the default behavior of having Ivy on.
NOTE:
This commit only changes the angular.io projects. The docs examples need
to be updated separately (first to Angular and CLI v9 and then to Ivy).
PR Close#32923
Removes the selection strategies for `AngularTemplateCompile` and `TypeScriptCompile` causing
them to use the automatic selection strategies instead.
PR Close#32678
Previously, the docker images used on CI where specified by a tag
(`10.16` and `10.16-browsers`). Since tags are not immutable, this only
pins specific characteristics of the environment (e.g. the OS type and
the Node.js version), but not others. Especially when using a tag that
does not specify the patch version (e.g. `10.16` instead of `10.16.0`),
it is inevitable that the image will change at some point, potentially
leading to unrelated failures due to changes in the environment.
One source of such failures can be the Chrome version used in tests.
Since we install a specific ChromeDriver version (that is only
compatible with specific Chrome version ranges), unexpectedly updating
to a newer Chrome version may break the tests if the new version falls
outside the range of supported version for our pinned ChromeDriver.
Using a tag that specifies the patch version (e.g. `10.16.0`) or even
the OS version (e.g. `10.16.0-buster`) is safer (i.e. has a lower
probability of introducing the kind of breakages described above), but
is still not fully hermetic.
This commit prevents such breakages by pinning the docker images by ID.
Image IDs are based on the image's digest (SHA256) and are thus
immutable, ensuring that all CI jobs will be running on the exact same
image.
See [here][1] for more info on pre-built CircleCI docker images and more
specifically [pinning images by ID][2].
[1]: https://circleci.com/docs/2.0/circleci-images
[2]: https://circleci.com/docs/2.0/circleci-images#using-a-docker-image-id-to-pin-an-image-to-a-fixed-version
PR Close#32602
This commit expands the `lint` CircleCI job to also run the
`tools/verify-codeownership.js` script. This script verifies that some
important files/directories in the codebase have code-owners assigned in
`.github/CODEOWNERS`.
The main purpose of this change is to prevent adding new directories
(e.g. packages or docs guides/examples) without assigning appropriate
code-owners. When no code-owner is explicitly assigned, corresponding
PRs will automatically request reviews from @igorminar, who is the
"fall-back" code-owner.
PR Close#32577
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 2817c9e2faa4140342336987a692d5dd30bf24c2
is needed in order to make the `material-unit-tests` job pass after the remove
of the `protractor_web_test_suite` bazel rule from @angular/bazel. `protractor_web_test_suite` is
now provided by the @bazel/protractor npm package.
PR Close#32485
The commit range that is associated with a CI build is used for a couple
of things (mostly related to payload-size tracking):
- Determine whether a size change was caused by application code or
dependencies (or both).
- Add the messages of the commits associated with the build (and thus
the payload-size change).
NOTE: The commit range is only used on push builds.
Previously, the commit range was computed based on the
`CIRCLE_COMPARE_URL` environment variable. With [CircleCI Pipelines][1]
enabled, `CIRCLE_COMPARE_URL` is no longer available and the commit
range cannot be reliably detected.
This commit switches `CI_COMMIT_RANGE` to only include the last commit.
This can be less accurate in some rare cases, but is true in the
majority of cases (on push builds). Additionally, it stores the CircleCI
build URL in the database along with the payload data, so the relevant
info can be retrieved when needed.
[1]: https://circleci.com/docs/2.0/build-processing
PR Close#32537
The docs examples e2e tests have been quite flaky recently. This causes
the `test_docs_examples` and `test_docs_examples_ivy` CircleCI jobs to
often fail (and block PRs) without a real reason.
This commit adds support for re-running failed docs examples e2e tests
and configures the `test_docs_examples` and `test_docs_examples_ivy`
jobs to try running each test that fails a second time, before giving up
and marking it as failed.
Closes#31841Closes#31842
PR Close#32497
These were initally added to allow for CircleCI to provide a better failure UI using junit data.
This information is not currently being created for bazel tests and once it is created it will
be available on the cloud status pages created by the BEP for each bazel execution.
PR Close#32292
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 18b9ef3f5529f0fa8f034944681486447af7b879
is needed in order to make the newly introduced material-ci test blocklist effective.
PR Close#32243
We don't need to build this branch as it's informative for the purposes of figuring out
the diff between the master and what's synced into google3.
PR Close#32202
Updates the `material-unit-tests` job to the latest commit
on the components repository. 097f4335a4e0b6e6b579829ae3a9cffce6292d2b.
This commit ensures that the postinstall script does not run NGC
on schematic code from `@angular/core`. Running NGC on the
generated schematic code can cause unexpected issues as some
migrations import types directly from `@angular/compiler-cli`
while the entry-point is not usable in all cases.
See: https://github.com/angular/angular/issues/29220.
PR Close#31650
The `setup-local` npm script uses `NgPackagesInstaller` to replace the
Angular packages with the locally built ones. Previously, it would (a)
assume that the packages were built and (b) it would do anything if the
currently installed versions already correspond to locally built
packages (even if not the latest version).
This could lead to all sorts of errors, such as:
- Confusing error messages, `dist/packages-dist/` was missing.
- Using outdated build artifacts from `dist/packages-dist/` without a
warning.
- Not installing the latest locally built packages, because the ones
installed already corresponded to locally built (but older) ones.
This commit fixes these issues by ensuring that:
- The local packages are always built before being used by
`NgPackagesInstaller`.
- The local packages are installed, even if the ones install already
correspond to local packages.
NOTE: Special `*-ci` scripts are introduced (for use on CI) that skip
building the local packages, since that step would have been taken
care of (in a more efficient way) in a previous CI step.
PR Close#31985
No longer locks the Material unit tests job to a specific branch, but rather allows
locking to a specific commit from a given branch. This allows us to use the
"master" branch from the `components` repository.
PR Close#31569
Previously, the ivy-2019 branch of the Material (aka components) repo was
used, which contains some changes that were necessary to work with Ivy.
These changes are not longer necessary, as Material's master branch is
fully working with Ivy today. To be up-to-date with recent Material
development and its support for more recent dependencies, e.g. TypeScript,
it is desirable for us to be on a newer version of Material.
This commit moves the Material tests away from the ivy-2019 branch, to a
recent commit on master. We are not targeting the master branch itself,
as that would introduce a moving target into Angular's CI checks, which
is undesirable.
Lastly, the usage of gulp to run Material's tests is changed into using
Bazel, as Material itself is now also built with Bazel.
PR Close#31569
Previously, the `test_saucelabs_bazel` job was run as part of the
`saucelabs_test` workflow every hour (for every "publish branch";
currently 8.0.x, 8.1.x and master).
Since this job runs a subset of the tests in
`legacy-unit-tests-saucelabs` (see [BUILD.bazel][1]) and is just a
proof-of-concept for running tests on SauceLabs via bazel, there is
little point in running is on all branches. It is also wasteful to run
it every hour, even if there were no changes pushed into the branch
since the last run.
This commit makes the job part of `default_workflow`, but limits it to
only be run on master builds (not on other branches or PRs). Based on
its recent history, the job is relatively stable and (since it will only
be run on master builds) it is not expected to affect our dev workflow.
[1]: https://github.com/angular/angular/blob/ef44f51d5/BUILD.bazel#L66-L92
PR Close#31636
JiaLiPassion
Joey Perrott
Paul Gschwendtner
George Kalpakas
Igor Minar
Matias Niemelä
Greg Magolan
Filipe Silva
Kara Erickson
JoostK