Previously the template binder would crash when encountering an unknown
localref (# reference) such as `<div #ref="foo">` when no directive has
`exportAs: "foo"`.
With this commit, the compiler instead generates a template diagnostic error
informing the user about the invalid reference.
PR Close#33454
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
The parser was accidentally reading the `target` tag
below the `alt-trans` target and overriding the correct
`target` tag.
(This already worked in `$localize` but a test has been
added to confirm.)
Fixes#33161
PR Close#33450
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
For abstract directives, i.e. directives without a selector, it may
happen that their constructor is called explicitly from a subclass,
hence its parameters are not required to be valid for Angular's DI
purposes. Prior to this commit however, having an abstract directive
with a constructor that has parameters that are not eligible for
Angular's DI would produce a compilation error.
A similar scenario may occur for `@Injectable`s, where an explicit
`use*` definition allows for the constructor to be irrelevant. For
example, the situation where `useFactory` is specified allows for the
constructor to be called explicitly with any value, so its constructor
parameters are not required to be valid. For `@Injectable`s this is
handled by generating a DI factory function that throws.
This commit implements the same solution for abstract directives, such
that a compilation error is avoided while still producing an error at
runtime if the type is instantiated implicitly by Angular's DI
mechanism.
Fixes#32981
PR Close#32987
In Angular View Engine, there are two kinds of decorator inheritance:
1) both the parent and child classes have decorators
This case is supported by InheritDefinitionFeature, which merges some fields
of the definitions (such as the inputs or queries).
2) only the parent class has a decorator
If the child class is missing a decorator, the compiler effectively behaves
as if the parent class' decorator is applied to the child class as well.
This is the "undecorated child" scenario, and this commit adds a migration
to ngcc to support this pattern in Ivy.
This migration has 2 phases. First, the NgModules of the application are
scanned for classes in 'declarations' which are missing decorators, but
whose base classes do have decorators. These classes are the undecorated
children. This scan is performed recursively, so even if a declared class
has a base class that itself inherits a decorator, this case is handled.
Next, a synthetic decorator (either @Component or @Directive) is created
on the child class. This decorator copies some critical information such
as 'selector' and 'exportAs', as well as supports any decorated fields
(@Input, etc). A flag is passed to the decorator compiler which causes a
special feature `CopyDefinitionFeature` to be included on the compiled
definition. This feature copies at runtime the remaining aspects of the
parent definition which `InheritDefinitionFeature` does not handle,
completing the "full" inheritance of the child class' decorator from its
parent class.
PR Close#33362
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
Recently it was made possible to have a directive without selector,
which are referred to as abstract directives. Such directives should not
be registered in an NgModule, but can still contain decorators for
inputs, outputs, queries, etc. The information from these decorators and
the `@Directive()` decorator itself needs to be registered with the
central `MetadataRegistry` so that other areas of the compiler can
request information about a given directive, an example of which is the
template type checker that needs to know about the inputs and outputs of
directives.
Prior to this change, however, abstract directives would only register
themselves with the `MetadataRegistry` as being an abstract directive,
without all of its other metadata like inputs and outputs. This meant
that the template type checker was unable to resolve the inputs and
outputs of these abstract directives, therefore failing to check them
correctly. The typical error would be that some property does not exist
on a DOM element, whereas said property should have been bound to the
abstract directive's input.
This commit fixes the problem by always registering the metadata of a
directive or component with the `MetadataRegistry`. Tests have been
added to ensure abstract directives are handled correctly in the
template type checker, together with tests to verify the form of
abstract directives in declaration files.
Fixes#30080
PR Close#33131
Previously, we had tested that expressions parsed in a Render3 AST
had correctly-defined absolute spans (spans relative to the entire
template, not the local expression). Sometimes we use Template ASTs
rather than Render3 ASTs, and it's desirable to test for correct
expression spans in the template parser as well.
Adding these tests resolved one bug, similar to the one fixed in
fd4fed14d8, where expressions in the value
of a template attribute were not given an absolute span corresponding to
the start of the attribute name rather than the start of the attribute
value.
The diff on this commit is large, partially because it involves some
structural changes of the template parser testing layout. In particular,
the following is done:
1. Move `createMeta*`-like functions from `template_parser_spec.ts` to
be exported from a new test utility file.
2. Create an `ExpressionSourceHumanizer`, similar to the one created in
b04488d692, to allow convenient testing
of expressions' locations.
3. Create `template_parser_absolute_span_spec.ts`, testing the spans of
expressions parsed by the template parser. This is very similar to
the `r3_ast_absolute_span_spec`.
PR Close#33253
Libraries can expose directive/component base classes that will be
used by consumer applications. Using such a base class from another
compilation unit works fine with "ngtsc", but when using "ngc", the
compiler will thrown an error saying that the base class is not
part of a NgModule. e.g.
```
Cannot determine the module for class X in Y! Add X to the NgModule to fix it.
```
This seems to be because the logic for distinguishing directives from
abstract directives is scoped to the current compilation unit within
ngc. This causes abstract directives from other compilation units to
be considered as actual directives (causing the exception).
PR Close#33347
Prior to this commit, we always invoked second i18n pass (in case whitespace removal is on, which is a default), even if a given template doesn't contain i18n information. Now we store a flag (that indicates presence of i18n information in a template) during first i18n pass and use it to check whether second pass is needed.
PR Close#33284
When computing i18n messages for templates there are two passes.
This is because messages must be computed before any whitespace
is removed. Then on a second pass, the messages must be recreated
but reusing the message ids from the first pass.
Previously ICUs were losing their legacy ids that had been computed
via the first pass. This commit fixes that by keeping track of the
message from the first pass (`previousMessage`) for ICU placeholder
nodes.
// FW-1637
PR Close#33318
Previously the parameter was `id` which is ambigous because it
could be a computed value rather than a developer specified custom
value.
PR Close#33318
This commit cleans up the I18MetaVisitor code by moving all the
state of the visitor into a `context` object that gets passed along
as the nodes are being visited. This is in keeping with how visitors
are designed but also makes it easy to remove the
[definite assignment assertions](https://mariusschulz.com/blog/strict-property-initialization-in-typescript#solution-4-definite-assignment-assertion)
from the class properties.
Also, a `I18nMessageFactory` named type is exported to make it
clearer to consumers of the `createI18nMessageFactory()` function.
PR Close#33318
This is a potential fix for https://github.com/angular/vscode-ng-language-service/issues/235
suggested by @andrius-pra in
47696136e3.
Currently, CRLF line endings are converted to LFs and this causes the
diagnostics span to be off in templates that use CRLF. The line endings
must be preserved in order to maintain correct span offset. The solution
is to add an option to the Tokenizer to indicate such preservation.
PR Close#33241
Prior to this commit, the absolute spans (relative to template source
file rather than the start of an expression) of expressions in a
template attribute like `*ngIf` were generated incorrectly, equating to
the relative spans.
This fixes the bug by passing an `absoluteOffset` parameter when parsing
template bindings.
Through some levels of indirection, this is required for the Language
Service to support text replacement in
https://github.com/angular/angular/pull/33091.
PR Close#33189
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
Injectable defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectableDef to "prov" (for "provider", since injector defs
are known as "inj"). This is because property names cannot
be minified by Uglify without turning on property mangling
(which most apps have turned off) and are thus size-sensitive.
PR Close#33151
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33151
The `legacyMessageIdFormat` is taken from the `i18nInFormat` property but we were only considering
`xmb`, `xlf` and `xlf2` values.
The CLI also supports `xliff` and `xliff2` values for the
`i18nInFormat`.
This commit adds support for those aliases.
PR Close#33160
Module defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngModuleDef to mod. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Pipe defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngPipeDef to pipe. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Currently, the spans of expressions are recorded only relative to the
template node that they reside in, not their source file.
Introduce a `sourceSpan` property on expression ASTs that records the
location of an expression relative to the entire source code file that
it is in. This may allow for reducing duplication of effort in
ngtsc/typecheck/src/diagnostics later on as well.
Child of #31898
PR Close#31897
BREAKING CHANGE:
We no longer directly have a direct depedency on `tslib`. Instead it is now listed a `peerDependency`.
Users not using the CLI will need to manually install `tslib` via;
```
yarn add tslib
```
or
```
npm install tslib --save
```
PR Close#32167
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
For v9 we want the migration to the new i18n to be as
simple as possible.
Previously the developer had to positively choose to use
legacy messsage id support in the case that their translation
files had not been migrated to the new format by setting the
`legacyMessageIdFormat` option in tsconfig.json to the format
of their translation files.
Now this setting has been changed to `enableI18nLegacyMessageFormat`
as is a boolean that defaults to `true`. The format is then read from
the `i18nInFormat` option, which was previously used to trigger translations
in the pre-ivy angular compiler.
PR Close#33053
This commit implements a tool that will inline translations and generate
a translated copy of a set of application files from a set of translation
files.
PR Close#32881
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
Re-enables the dynamic queries migration, now that we have all of the necessary framework changes in place.
Also moves the logic that identifies static queries out of the compiler and into the static queries migration, because that's the only place left that's using it.
PR Close#32992
The creation of StaticReflector in createMetadataResolver() is a very expensive operation because it involves numerous module resolutions.
To make matter worse, since the API of the Reflector does not provide the ability to invalidate its internal caches, it has to be destroyed and recreated on *every* program change.
This has a HUGE impact on performance.
This PR fixes this problem by carefully invalidating all StaticSymbols in a file that has changed, thereby reducing the overhead of recomputation on program change.
PR Close#32543
This is a re-submit of #32686.
Switches back to having the static flag be optional on ViewChild and ContentChild queries, in preparation for changing its default value.
PR Close#32986
These changes switch to defaulting the `static` flag on `ViewChild` and `ContentChild` queries to `false`, in addition to removing the logic that statically determines whether a query is dynamic.
PR Close#32720
The `$localize` library uses a new message digest function for
computing message ids. This means that translations in legacy
translation files will no longer match the message ids in the code
and so will not be translated.
This commit adds the ability to specify the format of your legacy
translation files, so that the appropriate message id can be rendered
in the `$localize` tagged strings. This results in larger code size
and requires that all translations are in the legacy format.
Going forward the developer should migrate their translation files
to use the new message id format.
PR Close#32937
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
Metadata blocks are delimited by colons. Previously the code naively just
looked for the next colon in the string as the end marker.
This commit supports escaping colons within the metadata content.
The Angular compiler has been updated to add escaping as required.
PR Close#32867
Previously the metadata and placeholder blocks were serialized in
a variety of places. Moreover the code for creating the `LocalizedString`
AST node was doing serialization, which break the separation of concerns.
Now this is all done by the code that renders the AST and is refactored into
helper functions to avoid repeating the behaviour.
PR Close#32867
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Switches back to having the `static` flag be optional on `ViewChild` and `ContentChild` queries, in preparation for changing its default value.
PR Close#32686
These changes switch to defaulting the `static` flag on `ViewChild` and `ContentChild` queries to `false`, in addition to removing the logic that statically determines whether a query is dynamic.
PR Close#32720
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
As discussed in https://hackmd.io/33M5Wb-JT7-0fneA0JuHPA `SourceMessage`
strings are not sufficient for matching translations.
This commit updates `@angular/localize` to use `MessageId`s for translation
matching instead.
Also the run-time translation will now log a warning to the console if a
translation is missing.
BREAKING CHANGE:
Translations (loaded via the `loadTranslations()` function) must now use
`MessageId` for the translation key rather than the previous `SourceMessage`
string.
PR Close#32594
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
The `goog.getMsg()` function requires placeholder names to be camelCased.
This is not the case for `$localize`. Here placeholder names need
match what is serialized to translation files.
Specifically such placeholder names keep their casing but have all characters
that are not in `a-z`, `A-Z`, `0-9` and `_` converted to `_`.
PR Close#32509
Prior to this commit, complex expressions (that require additional statements to be generated) were handled incorrectly in case they were used in attributes annotated with i18n flags. The problem was caused by the fact that extra statements were not appended to the temporary vars block, so they were missing in generated code. This commit updated the logic to use the `convertPropertyBinding`, which contains the necessary code to append extra statements. The `convertExpressionBinding` function was removed as it duplicates the `convertPropertyBinding` one (for the most part) and is no longer used.
PR Close#32309
Previously the template compiler would generate the same jsdoc comment
block for `$localize` as for `goog.getMsg()`. But it turns out that
the closure compiler will complain if the `@desc` and `@meaning`
tags are used for non-`getMsg()` calls.
For now we do not generate the comments for `$localize` calls. They are
not being used at the moment.
In the future it would be good to be able to extract the descriptions and
meanings from the `$localize` calls rather than relying upon the `getMsg()`
calls, which we do now. So we need to find a workaround for this constraint.
PR Close#32473
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
Previously, ngtsc attempted to use the .d.ts schema for HTML elements to
check bindings to DOM properties. However, the TypeScript lib.dom.d.ts
schema does not perfectly align with the Angular DomElementSchemaRegistry,
and these inconsistencies would cause issues in apps. There is also the
concern of supporting both CUSTOM_ELEMENTS_SCHEMA and NO_ERRORS_SCHEMA which
would have been very difficult to do in the existing system.
With this commit, the DomElementSchemaRegistry is employed in ngtsc to check
bindings to the DOM. Previous work on producing template diagnostics is used
to support generation of this different kind of error with the same high
quality of error message.
PR Close#32171
This option makes ngc behave as tsc, and was originally implemented before
ngtsc existed. It was designed so we could build JIT-only versions of
Angular packages to begin testing Ivy early, and is not used at all in our
current setup.
PR Close#32219
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
Similar to interpolation, we do not want to completely remove whitespace
nodes that are siblings of an expansion.
For example, the following template
```html
<div>
<strong>items left<strong> {count, plural, =1 {item} other {items}}
</div>
```
was being collapsed to
```html
<div><strong>items left<strong>{count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left4
```
instead it should be collapsed to
```html
<div><strong>items left<strong> {count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left 4
```
---
**Analysis of the code and manual testing has shown that this does not cause
the generated ids to change, so there is no breaking change here.**
PR Close#31962
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
Template AST nodes for (bound) attributes, variables and references will
now retain a reference to the source span of their value, which allows
for more accurate type check diagnostics.
PR Close#30181
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
This commit updates the `_clone` function of the `_ApplySourceSpanTransformer` class, where the for-in loop was used, resulting in copying from prototype to own properties, thus consuming more memory. Prior to NodeJS 12 (V8 versions before 7.4) there was an optimization that was improving the situation and since that logic was removed in favor of other optimizations, the situation with memory consumption caused by the for-in loop got worse. This commit adds a check to make sure we copy only own properties over to cloned object.
Closes#31627.
PR Close#31638
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
As part of FW-1265, the `@angular/compiler` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Since `goog.getMsg` does not process ICUs (post-processing is required via goog.i18n.MessageFormat, https://google.github.io/closure-library/api/goog.i18n.MessageFormat.html) and placeholder format used for ICUs and regular messages inside `goog.getMsg` are different, the current implementation (that assumed the same placeholder format) needs to be updated. This commit updates placeholder format used inside ICUs from `{$placeholder}` to `{PLACEHOLDER}` to better align with Closure. ICU placeholders (that were left as is prior to this commit) are now replaced with actual values in post-processing step (inside `i18nPostprocess`).
PR Close#31459
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
There's no build time dependency from @angular/core to @angular/compiler,
so core can't directly refer to compiler types. To overcome this limitation,
there's a facade layer defined in the compiler and duplicated in core,
such that during runtime all types will correctly align.
There's a testcase in the compiler that verifies that all such facade types
are compatible across core and compiler, such that the core types can't get
misaligned with the actual definitions in the compiler. This suite of
tests were missing the `R3BaseMetadataFacade` facade type, so it was possible
for this type to get out of sync.
PR Close#31210
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
These files have not been formatted properly, due to issues in the
`gulp format*` tasks. See previous commits (or #31295) for more details.
PR Close#31295
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Change the Element constructor in r3_ast to create a new ParseSourceSpan when regenerating it rather than extending an object, which does not contain the overloaded toString().
PR Close#31190
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.
FW-1385 #resolve
PR Close#31131
This commit fixes a couple of issues with TS 3.5 compatibility in order to
unblock migration of g3. Mostly 'any's are added, and there are no behavior
changes.
PR Close#31174
Move the definition leadingTriviaChars included in parsing a template
to the parameters of parseTemplate. This allows overriding of the
default leadingTriviaChars, which is needed by some pipelines like the
indexing pipeline because leadingTriviaChars may throw off the recorded
span of selectors.
PR Close#31136
Currently the `RecursiveAstVisitor` that is part of the template expression
parser does not _always_ properly pass through the context that can be
specified when visting a given expression. Only a handful of AST types
pass through the context while others are accidentally left out. This causes
unexpected and inconsistent behavior and basically makes the `context`
parameter not usable if the type of template expression is not known.
e.g. the template variable assignment migration currently depends on
the `RecursiveAstVisitor` but sometimes breaks if developers use
things like conditionals in their template variable assignments.
Fixes#31043
PR Close#31085
A temporary check is in place to determine whether a key in an object
literal needs to be quoted during emit. Previously, only the presence of
a dash caused a key to become quoted, this however is not sufficient for
@angular/flex-layout to compile properly as it has dots in its inputs.
This commit extends the check to also use quotes when a dot is present.
Fixes#30114
PR Close#31146
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead
PR Close#30792
To provide some context: The implicit receiver is part of the
parsed Angular template AST. Any property reads in bindings,
interpolations etc. read from a given object (usually the component
instance). In that case there is an _implicit_ receiver which can also
be specified explicitly by just using `this`.
e.g.
```html
<ng-template>{{this.myProperty}}</ng-template>
```
This works as expected in Ivy and View Engine, but breaks in case the
implicit receiver is not used for property reads. For example:
```html
<my-dir [myFn]="greetFn.bind(this)"></my-dir>
```
In that case the `this` will not be properly translated into the generated
template function code because the Ivy compiler currently always treats
the `ctx` variable as the implicit receiver. This is **not correct** and breaks
compatibility with View Engine. Rather we need to ensure that we retrieve
the root context for the standalone implicit receiver similar to how it works
for property reads (as seen in the example above with `this.myProperty`)
Note that this requires some small changes to the `expression_converter`
because we only want to generate the `eenextContent()` instruction if the
implicit receiver is _actually_ used/needed. View Engine determines if that is the case by recursively walking through the converted output AST and
checking for usages of the `o.variable('_co')` variable ([see here][ve_check]). This would work too for Ivy, but involves most likely more code duplication
since templates are isolated in different functions and it another pass
through the output AST for every template expression.
[ve_check]: 0d6c9d36a1/packages/compiler/src/view_compiler/view_compiler.ts (L206-L208)
Resolves FW-1366.
PR Close#30897
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
Added a new syntax for projections (`¤` will represent `ng-content` nodes) so that we can treat them specifically.
When we enter an i18n block with the instruction `i18nStart`, a new `delayProjection` variable is set to true to prevent the instruction `projection` from projecting the nodes. Once we reach the `i18nEnd` instruction and encounter a projection in the translation we will project its nodes.
If a projection was removed from a translation, then its nodes won't be projected at all.
The variable `delayProjection` is restored to `false` at the end of `i18nEnd` so that it doesn't stop projections outside of i18n blocks.
FW-1261 #resolve
PR Close#30782
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
`i18nAttributes` instructions always occur after the element instruction. This means that we need to treat `i18n-` attributes differently.
By defining a specific `AttributeMarker` we can ensure that we won't trigger directive inputs with untranslated attribute values.
FW-1332 #resolve
PR Close#30402
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
The R3TargetBinder "binds" an Angular template AST, computing semantic
information regarding the template and making it accessible.
One of the binding passes previously had a bug, where for the following
template:
<div *ngIf="foo as foo"></div>
which desugars to:
<ng-template ngIf [ngIf]="foo" let-foo="ngIf">
<div></div>
</ng-template>
would have the `[ngIf]` binding processed twice - in both the scope which
contains the `<ng-template>` and the scope inside the template. The bug
arises because during the latter, `foo` is a variable defined by `let-foo`,
and so the R3TargetBinder would incorrectly learn that `foo` inside `[ngIf]`
maps to that variable.
This commit fixes the bug by only processing inputs, outputs, and
templateAttrs from `Template`s in the outer scope.
PR Close#30669
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
This patch in the second runtime change which refactors how styling
bindings work in Angular. This patch refactors how map-based
`[style]` and `[class]` bindings work using a new algorithm which
is faster and less complex than the former one.
This patch is a follow-up to an earlier refactor which enabled
support for prop-based `[style.name]` and `[class.name]`
bindings (see f03475cac8).
PR Close#30543
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
This is the first refactor PR designed to change how styling bindings
(i.e. `[style]` and `[class]`) behave in Ivy. Instead of having a heavy
element-by-element context be generated for each element, this new
refactor aims to use a single context for each `tNode` element that is
examined and iterated over when styling values are to be applied to the
element.
This patch brings this new functionality to prop-based bindings such as
`[style.prop]` and `[class.name]`.
PR Close#30469
Alex Rickabaugh
crisbeto
Pete Bacon Darwin
JoostK
Matias Niemelä
ayazhafiz
Paul Gschwendtner
Andrew Kushnir
Keen Yee Liau
Igor Minar
Kara Erickson
Alan Agius
Nikita Potapenko
Danny Skoog
Alex Eagle
Keen Yee Liau
Andrius
atscott
Misko Hevery
Pawel Kozlowski
atscott
George Kalpakas
Olivier Combe
Ben Lesh
Alex Eagle
diyews