Commit Graph

269 Commits

Author SHA1 Message Date
Filipe Silva 6db5c4a6f6 ci: use CircleCI executors (#32745)
Executors let you define custom execution contexts for jobs.

See https://circleci.com/docs/2.0/reusing-config/#authoring-reusable-executors for more information.

PR Close #32745
2019-10-02 09:34:11 -07:00
Joey Perrott 252966bcca ci: build bazel saucelabs tests remotely (#32719)
PR Close #32719
2019-09-17 15:14:17 -07:00
Joey Perrott 894c4b5390 ci: use automatic selection strategies (#32678)
Removes the selection strategies for `AngularTemplateCompile` and `TypeScriptCompile` causing
them to use the automatic selection strategies instead.

PR Close #32678
2019-09-16 15:35:37 -07:00
Joey Perrott 4ff9c942c0 ci: use remote strategy for AngularTemplateCompile and TypeScriptCompile (#32678)
PR Close #32678
2019-09-16 15:35:37 -07:00
George Kalpakas 43bbc409a2 ci: pin docker images by ID for hermeticity (#32602)
Previously, the docker images used on CI where specified by a tag
(`10.16` and `10.16-browsers`). Since tags are not immutable, this only
pins specific characteristics of the environment (e.g. the OS type and
the Node.js version), but not others. Especially when using a tag that
does not specify the patch version (e.g. `10.16` instead of `10.16.0`),
it is inevitable that the image will change at some point, potentially
leading to unrelated failures due to changes in the environment.

One source of such failures can be the Chrome version used in tests.
Since we install a specific ChromeDriver version (that is only
compatible with specific Chrome version ranges), unexpectedly updating
to a newer Chrome version may break the tests if the new version falls
outside the range of supported version for our pinned ChromeDriver.

Using a tag that specifies the patch version (e.g. `10.16.0`) or even
the OS version (e.g. `10.16.0-buster`) is safer (i.e. has a lower
probability of introducing the kind of breakages described above), but
is still not fully hermetic.

This commit prevents such breakages by pinning the docker images by ID.
Image IDs are based on the image's digest (SHA256) and are thus
immutable, ensuring that all CI jobs will be running on the exact same
image.

See [here][1] for more info on pre-built CircleCI docker images and more
specifically [pinning images by ID][2].

[1]: https://circleci.com/docs/2.0/circleci-images
[2]: https://circleci.com/docs/2.0/circleci-images#using-a-docker-image-id-to-pin-an-image-to-a-fixed-version

PR Close #32602
2019-09-11 12:34:14 -04:00
George Kalpakas 65f5c0476f ci: check code-ownership on CI (#32577)
This commit expands the `lint` CircleCI job to also run the
`tools/verify-codeownership.js` script. This script verifies that some
important files/directories in the codebase have code-owners assigned in
`.github/CODEOWNERS`.

The main purpose of this change is to prevent adding new directories
(e.g. packages or docs guides/examples) without assigning appropriate
code-owners. When no code-owner is explicitly assigned, corresponding
PRs will automatically request reviews from @igorminar, who is the
"fall-back" code-owner.

PR Close #32577
2019-09-10 17:30:55 -04:00
Greg Magolan f937f8f604 ci: update material-unit-tests commit (#32485)
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 2817c9e2faa4140342336987a692d5dd30bf24c2
is needed in order to make the `material-unit-tests` job pass after the remove
of the `protractor_web_test_suite` bazel rule from @angular/bazel. `protractor_web_test_suite` is
now provided by the @bazel/protractor npm package.

PR Close #32485
2019-09-10 15:19:31 -04:00
George Kalpakas b5eda603a2 ci: work around `CIRCLE_COMPARE_URL` not being available wih CircleCI Pipelines (#32537)
The commit range that is associated with a CI build is used for a couple
of things (mostly related to payload-size tracking):
- Determine whether a size change was caused by application code or
  dependencies (or both).
- Add the messages of the commits associated with the build (and thus
  the payload-size change).

NOTE: The commit range is only used on push builds.

Previously, the commit range was computed based on the
`CIRCLE_COMPARE_URL` environment variable. With [CircleCI Pipelines][1]
enabled, `CIRCLE_COMPARE_URL` is no longer available and the commit
range cannot be reliably detected.

This commit switches `CI_COMMIT_RANGE` to only include the last commit.
This can be less accurate in some rare cases, but is true in the
majority of cases (on push builds). Additionally, it stores the CircleCI
build URL in the database along with the payload data, so the relevant
info can be retrieved when needed.

[1]: https://circleci.com/docs/2.0/build-processing

PR Close #32537
2019-09-09 12:21:44 -04:00
George Kalpakas 497d6b1323 ci: re-run flaky docs examples e2e tests in `test_docs_examples[_ivy]` jobs (#32497)
The docs examples e2e tests have been quite flaky recently. This causes
the `test_docs_examples` and `test_docs_examples_ivy` CircleCI jobs to
often fail (and block PRs) without a real reason.

This commit adds support for re-running failed docs examples e2e tests
and configures the `test_docs_examples` and `test_docs_examples_ivy`
jobs to try running each test that fails a second time, before giving up
and marking it as failed.

Closes #31841
Closes #31842

PR Close #32497
2019-09-05 18:10:31 -04:00
Joey Perrott 4b1251106e build: bump yarn requirement to 1.17.3 (#32344)
PR Close #32344
2019-08-28 17:13:05 -07:00
Joey Perrott e79ba194b4 ci: remove unused artifact uploads from test job (#32292)
These were initally added to allow for CircleCI to provide a better failure UI using junit data.
This information is not currently being created for bazel tests and once it is created it will
be available on the cloud status pages created by the BEP for each bazel execution.

PR Close #32292
2019-08-26 09:56:29 -07:00
Joey Perrott a367b90a82 ci: copy bazelrc files to home RC locations (#32251)
PR Close #32251
2019-08-21 17:08:40 -07:00
Paul Gschwendtner daac386f4d ci: update material-unit-tests commit (#32243)
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 18b9ef3f5529f0fa8f034944681486447af7b879
is needed in order to make the newly introduced material-ci test blocklist effective.

PR Close #32243
2019-08-21 10:41:51 -07:00
Kara Erickson dd6070a49b ci: update material commit we use to run integration tests (#32220)
We need to update the commit so we can make Hammer support optional in 32203.

PR Close #32220
2019-08-20 14:26:16 -07:00
Igor Minar bb3c684b98 ci: exclude the upstream g3 branch from building on CI (#32202)
We don't need to build this branch as it's informative for the purposes of figuring out
the diff between the master and what's synced into google3.

PR Close #32202
2019-08-20 09:55:55 -07:00
Filipe Silva 0b1bf14cd8 ci: use circleci windows preview (#31266)
PR Close #31266
2019-08-19 13:32:14 -07:00
Filipe Silva d1cc7a0b26 ci: use no_output_timeout for long jobs (#31266)
PR Close #31266
2019-08-19 13:32:13 -07:00
Joey Perrott 43163523f6 ci: move bazel saucelabs execution to script to be used across all Angular repos (#32141)
PR Close #32141
2019-08-16 09:57:23 -07:00
Paul Gschwendtner 4d96cf5197 ci: update material-unit-tests job to latest commit (#31650)
Updates the `material-unit-tests` job to the latest commit
on the components repository. 097f4335a4e0b6e6b579829ae3a9cffce6292d2b.

This commit ensures that the postinstall script does not run NGC
on schematic code from `@angular/core`. Running NGC on the
generated schematic code can cause unexpected issues as some
migrations import types directly from `@angular/compiler-cli`
while the entry-point is not usable in all cases.

See: https://github.com/angular/angular/issues/29220.

PR Close #31650
2019-08-13 14:40:52 -07:00
Joey Perrott 6215636bc6 ci: use local strategy for AngularTemplateCompile and TypescriptCompile on CI (#32112)
PR Close #32112
2019-08-13 09:57:50 -07:00
George Kalpakas a574e462c9 build(docs-infra): ensure the locally built packages exist and are up-to-date in `yarn setup-local` (#31985)
The `setup-local` npm script uses `NgPackagesInstaller` to replace the
Angular packages with the locally built ones. Previously, it would (a)
assume that the packages were built and (b) it would do anything if the
currently installed versions already correspond to locally built
packages (even if not the latest version).
This could lead to all sorts of errors, such as:
- Confusing error messages, `dist/packages-dist/` was missing.
- Using outdated build artifacts from `dist/packages-dist/` without a
  warning.
- Not installing the latest locally built packages, because the ones
  installed already corresponded to locally built (but older) ones.

This commit fixes these issues by ensuring that:
- The local packages are always built before being used by
  `NgPackagesInstaller`.
- The local packages are installed, even if the ones install already
  correspond to local packages.

NOTE: Special `*-ci` scripts are introduced (for use on CI) that skip
      building the local packages, since that step would have been taken
      care of (in a more efficient way) in a previous CI step.

PR Close #31985
2019-08-05 12:56:44 -07:00
Paul Gschwendtner 0cd4c019cf build: lock material unit tests job to specific commit (#31569)
No longer locks the Material unit tests job to a specific branch, but rather allows
locking to a specific commit from a given branch. This allows us to use the
"master" branch from the `components` repository.

PR Close #31569
2019-07-25 13:08:33 -07:00
JoostK 7e46a6d99d test(ivy): update Material to recent commit from master branch (#31569)
Previously, the ivy-2019 branch of the Material (aka components) repo was
used, which contains some changes that were necessary to work with Ivy.
These changes are not longer necessary, as Material's master branch is
fully working with Ivy today. To be up-to-date with recent Material
development and its support for more recent dependencies, e.g. TypeScript,
it is desirable for us to be on a newer version of Material.

This commit moves the Material tests away from the ivy-2019 branch, to a
recent commit on master. We are not targeting the master branch itself,
as that would introduce a moving target into Angular's CI checks, which
is undesirable.

Lastly, the usage of gulp to run Material's tests is changed into using
Bazel, as Material itself is now also built with Bazel.

PR Close #31569
2019-07-25 13:08:33 -07:00
JiaLiPassion 87ce4e997b fix(zone.js): zone-mix should import correct browser module (#31628)
Close #31626

PR Close #31628
2019-07-24 14:33:07 -07:00
George Kalpakas f10d6c66c9 ci: add info about `test_saucelabs_bazel` being limited to master builds (#31651)
Follow-up to #31636 (see
https://github.com/angular/angular/pull/31636#discussion_r305120859)

PR Close #31651
2019-07-19 09:57:32 -07:00
George Kalpakas 7b6ee5e0d9 ci: move the `test_saucelabs_bazel` CircleCI job to `default_workflow` (#31636)
Previously, the `test_saucelabs_bazel` job was run as part of the
`saucelabs_test` workflow every hour (for every "publish branch";
currently 8.0.x, 8.1.x and master).

Since this job runs a subset of the tests in
`legacy-unit-tests-saucelabs` (see [BUILD.bazel][1]) and is just a
proof-of-concept for running tests on SauceLabs via bazel, there is
little point in running is on all branches. It is also wasteful to run
it every hour, even if there were no changes pushed into the branch
since the last run.

This commit makes the job part of `default_workflow`, but limits it to
only be run on master builds (not on other branches or PRs). Based on
its recent history, the job is relatively stable and (since it will only
be run on master builds) it is not expected to affect our dev workflow.

[1]: https://github.com/angular/angular/blob/ef44f51d5/BUILD.bazel#L66-L92

PR Close #31636
2019-07-18 16:45:27 -07:00
George Kalpakas e822394075 refactor: group similar jobs in `config.yml > default_workflow` (#31636)
PR Close #31636
2019-07-18 16:45:27 -07:00
Joey Perrott 32aa18be78 build: add tsconfig-test to dependency for tsconfig in core/test/strict_types (#31471)
PR Close #31471
2019-07-12 11:38:16 -04:00
Joey Perrott e44ba0ffa9 build: use standalone strategy for TypescriptCompile and AngularTemplateCompile (#31471)
PR Close #31471
2019-07-12 11:38:16 -04:00
Alex Eagle 14ad7562c6 build: use remote actions for TS/NG compilations on CircleCI (#31471)
PR Close #31471
2019-07-12 11:38:16 -04:00
George Kalpakas 0e86551a63 ci(docs-infra): run a11y audits on certain pages on CI (#31414)
PR Close #31414
2019-07-11 17:13:47 -04:00
Joey Perrott 9515f171b4 ci: update gcp_token (#31405)
PR Close #31405
2019-07-03 08:54:02 -07:00
George Kalpakas 119004c7d4 ci: add branch info to CircleCI failure notifications (#31319)
PR Close #31319
2019-06-27 15:52:14 -07:00
Joey Perrott e8d0265c1e ci: enable remote build caching for CI jobs (#31204)
Enables remote caching for CI jobs.

This configuration:

always reads from build cache on CI
only write to build cache for local builds for non-PR CI run

PR Close #31204
2019-06-25 10:26:43 -07:00
Paul Gschwendtner 1d5c44551d build: use checked-in configuration from bazel-toolchains (#31251)
No longer uses docker in order to pull down the toolchain configs
for remote build execution. We don't need to make docker a prerequisite
for working on the Angular repository since we can leverage the checked-in
toolchain configurations from the `@bazel-toolchains` repository.

PR Close #31251
2019-06-25 10:24:43 -07:00
George Kalpakas 6f5d910ddd ci: send failure notifications from `saucelabs_tests` to `dev-infra-ci-failures` (#31202)
PR Close #31202
2019-06-21 15:29:35 -07:00
George Kalpakas d72f8c949f ci: make logic for failure notifications more re-usable (#31202)
PR Close #31202
2019-06-21 15:29:35 -07:00
George Kalpakas 29df3b0ee2 ci: send `aio_monitoring` failure notifications to the `dev-infra-ci-failures` channel (#31202)
PR Close #31202
2019-06-21 15:29:35 -07:00
JiaLiPassion 5eb7426216 build: move zone.js to angular repo (#30962)
PR Close #30962
2019-06-20 11:27:39 -07:00
Joey Perrott f5fa9dc6b8 ci: propagate xml results to CI (#31100)
PR Close #31100
2019-06-18 09:51:41 -07:00
Paul Gschwendtner 4adf95ed6f ci: publish snapshots job is unable to decode github token (#31099)
The publish_snapshots job is currently not able to decode the Github
token because the openssl version changed. This is because the default
digest for more recent openssl version has been updated and the github
token file has been encrypted with an old digest. We need to ensure
that the md5 digest is used for decryption as that matches the
digest used for encryption.

PR Close #31099
2019-06-17 13:56:12 -07:00
Paul Gschwendtner e0969b2480 ci: update nodejs version to v10.16.0 (#31088)
Updates the NodeJS version to the latest stable version at the time of
writing (v10.16.0). We need to update our image to use a minimum NodeJS
version of v10.15.0 because new CLI apps automatically install a non-locked
version of selenium-webdriver that now requires NodeJS >= 10.15.0 since the
latest release of 17th June 2019 (4.0.0-alpha.3).

See CI failures: https://circleci.com/gh/angular/angular/359077

PR Close #31088
2019-06-17 13:07:27 -07:00
George Kalpakas c596795e64 ci(docs-infra): check and track payload sizes for `test_aio_local` and `test_aio_local_ivy` (#31047)
PR Close #31047
2019-06-14 14:38:10 -07:00
George Kalpakas a6cb20cbe7 ci(docs-infra): run PWA score tests after unit/e2e tests (#31047)
Previously, we run the PWA score tests before unit/e2e tests, because
the latter would destroy the `dist/` directory required by the former.

Since cli@6, unit/e2e tests no longer detroy the `dist/` directory, so
it is now safe to run the unit/e2e tests first. This is preferrable,
since they are conceptually lower-level and any error messages (in case
of breakage) are more specific/actionable.

Related discussion about cli behavior:
- angular/angular-cli#4366
- angular/angular-cli#14701

PR Close #31047
2019-06-14 14:38:10 -07:00
George Kalpakas 5d24a75ac9 docs: minor fix in `get-commit-range.js` docs (#31049)
PR Close #31049
2019-06-14 10:41:43 -07:00
Xin Gao 9abf114fbb feat(bazel): use rbe_autoconfig() and new container. (#29336)
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).

Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.

PR Close #29336
2019-05-09 14:58:34 -07:00
George Kalpakas b70d20b510 fix(docs-infra): update app code to work with Ivy (#28530)
This commit also enables more tests to be run on CI with Ivy.

PR Close #28530
2019-05-01 16:38:32 -07:00
George Kalpakas b15a403c71 ci(docs-infra): re-enable `aio_monitoring` CircleCI jobs and change time (#30168)
The `aio_monitoring_next` CircleCI job was disabled due to a failure in
[302254](https://circleci.com/gh/angular/angular/302254). It turned out
the failure was caused because the job happened to run after a change
had been merged into master and right before it was deployed to
https://next.angular.io/ causing the tests not to match the deployed
version.

This commit re-enables the job and moves it to a different time, when it
is less likely that PRs will be being merged (and thus reducing the risk
of a similar timming issue).

Fixes #30101

PR Close #30168
2019-04-30 16:17:52 -07:00
Andrew Kushnir 537502d685 docs: temporary disable aio_monitoring job due to a version skew (#30161)
It looks like `aio_monitoring` CircleCI job is still failing. Disabling it for now to keep master green.

PR Close #30161
2019-04-26 17:38:59 -07:00
George Kalpakas 3efdd39a18 ci(docs-infra): use the tests from the stable branch in `aio_monitoring_stable` CircleCI job (#30110)
Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.

This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.

Fixes #30101

PR Close #30110
2019-04-26 16:33:45 -07:00
George Kalpakas 582ef2e7b4 ci(docs-infra): split the `aio_monitoring` CircleCI job into two jobs (#30110)
Previously, the `aio_monitoring` job was testing both the stable
(https://angular.io/) and the @next (https://next.angular.io/) versions.

This commit splits the tests into two separate jobs (still run as part
of the same workflow). This speeds up the tests (since the two jobs can
now run in parallel) and makes it easier to isolate failures (e.g.
identify which branch is failing, disable one of the two, etc.).
(Credits to @petebacondarwin 😉)

PR Close #30110
2019-04-26 16:33:45 -07:00
George Kalpakas 214fef2ee4 ci(docs-infra): re-use `setup` CircleCI job in `aio_monitoring` (#30110)
PR Close #30110
2019-04-26 16:33:45 -07:00
George Kalpakas 531fcaa99a ci(docs-infra): re-enable `aio_monitoring` CircleCI job (#30110)
The job started failing for https://angular.io/, due to changes in tests
that only affected https://next.angular.io/, and was disabled in #30102.

This commit re-enables the job (since it does not block anything and it
will be fixed in a subsequent commit).

PR Close #30110
2019-04-26 16:33:45 -07:00
Andrew Kushnir a400429faa docs: temporary disable aio_monitoring job due to a version skew (#30102)
Redirects that were updated in 24c61cb63e break the aio_monitoring CircleCI job, since we run the tests against the production angular.io site (that doesn't have the latest redirects config yet).

This change temporary disables the aio_monitoring job to avoid failures for other PRs. The problem will be resolved and the job will be enabled in followup PRs.

PR Close #30102
2019-04-24 18:01:50 -07:00
Paul Gschwendtner 71498a407a ci: remove integration test "uname -a" command (#30006)
We recently added the "uname -a" command to the CircleCI
integration test in order to identify Linux kernels that
broke Chrome sandboxing.

Since this issue seems to be claimed as fixed by the CircleCI
support and we didn't see any sandboxing issues the last month,
we are removing the debugging command we added.

PR Close #30006
2019-04-22 08:46:51 -07:00
George Kalpakas f957c7c1cd ci(docs-infra): use pre-ivy packages in `test_aio_local_ivy` to test ngcc (#29989)
To better test ngcc (in addition to Ivy) on angular.io, change the
`test_aio_local_ivy` CircleCI job to use the pre-ivy Angular packages
(and have ngcc transform them to Ivy ones).

PR Close #29989
2019-04-19 09:46:48 -07:00
George Kalpakas 60e9d2da4f ci(docs-infra): increase wait for SW on localhost to avoid CI flakes (#29953)
The server used for testing on localhost has less optimizations (e.g.
serves uncompressed files), so we need to wait longer the ServiceWorker
to be loaded and registered to allow Lighthouse to reliably detect it,
especially on slower environments (e.g. CI).

Related: https://github.com/GoogleChrome/lighthouse/issues/5527#issuecomment-483710849

Fixes #29910

PR Close #29953
2019-04-17 12:14:39 -07:00
George Kalpakas 8027b3e19b ci(docs-infra): temporarily lower the min required PWA score for localhost tests (#29911)
The PWA score tests have been occasionally failing on CI recently
(possibly due to CI VM/network issues).

This commit temporarily disables them, until we investigate the
root-cause and/or put a work-around in place.

The PWA score tests are still run against the deployed versions (which
don't suffer as much) or PRs with public previews (as part of the
`test_aio_preview` job) and on upstream builds (as part of the
`deploy_aio` job).

Related to #29910.

[1]: https://github.com/angular/angular/blob/3a836c362/.circleci/config.yml#L390

PR Close #29911
2019-04-15 12:34:42 -07:00
George Kalpakas 6227d0bb3b ci: correctly detect status 400 as failure in `get-commit-range` (#29839)
PR Close #29839
2019-04-11 08:20:25 -07:00
Alex Eagle cb9ee3411f ci: simplify RBE execution (#29731)
Run all targets with RBE config. Previously we filtered out one target, //tools/ts-api-guardian:tests, and ran that with a different bazelrc

PR Close #29731
2019-04-08 12:03:54 -07:00
George Kalpakas fd122b0739 ci: cache Material `node_modules` based on the lockfile checksum (#29417)
This will increase the cache hit rate for the `material-unit-tests` job.
Related to https://github.com/angular/angular/pull/29416#discussion_r267321140.

PR Close #29417
2019-03-20 13:13:27 -04:00
Paul Gschwendtner a530ed11e8 ci: do not cache modified "node_modules" in "material-unit-tests" job (#29416)
Currently we cache the Material `node_modules` after
the `run_angular_material_unit_tests.sh` completed. This
means that the cache will incorrectly contain the Ivy NPM
package output which might be incompatible with the
other Material dependencies. e.g. the Material postinstall
command now uses a different NGC version that does not
work with the `typescript` version that has been specified in
the Material project.

PR Close #29416
2019-03-20 06:58:23 -07:00
Paul Gschwendtner 19ff32036e ci: enable parallelism for material-unit tests job (#29378)
PR Close #29378
2019-03-19 17:14:53 -04:00
Paul Gschwendtner 37cc514f0f ci: add yarn cache for material-unit tests job (#29378)
PR Close #29378
2019-03-19 17:14:53 -04:00
Paul Gschwendtner 80379697e2 ci: debug sandbox issue for circleci team (#29309)
The CircleCI team needs to know what causes the Kernel
inconsistency that most likely causes our no usable sandbox
errors. Therefore we add "uname -r"

PR Close #29309
2019-03-14 16:00:46 -04:00
Paul Gschwendtner b7c17ff207 ci: run legacy saucelabs for every build (#29255)
Recently we moved the Saucelabs job into a cronjob in order to avoid
heavy flakiness that we experienced due to a Saucelabs connect bug
that has been supposedly fixed by the Saucelabs team (no new version
is released yet though).

Our initial assumption was that we very rarely hit specific browser failures
and can therefore move the Saucelabs tests into a cronjob, but after some
days of having the cronjob, we realized that we actually hit browser-specific
failures quite often and that we should run the tests for every PR (like before)

PR Close #29255
2019-03-12 12:31:49 -07:00
Filipe Silva e6117a3a49 ci: rebase PRs on target branch (#29215)
PR Close #29215
2019-03-12 11:34:58 -07:00
Filipe Silva a8b432d55d ci: add descriptive message for merge conflicts (#29215)
Fix #29199

PR Close #29215
2019-03-12 11:34:58 -07:00
Paul Gschwendtner 4227126305 ci(docs-infra): run cli docs examples concurrently (#29103)
PR Close #29103
2019-03-12 10:46:03 -07:00
Paul Gschwendtner 69265b7b5d ci(docs-infra): "test_aio_local_ivy" job should attach ivy package output (#29117)
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to build AIO with Ivy.

PR Close #29117
2019-03-05 11:41:44 -08:00
Paul Gschwendtner 01577b0bed ci: bazel saucelabs test job does not setup circleci bazelrc (#29106)
Currently the `test_saucelabs` job does not use our general
CircleCI bazel configuration. We should set this configuration
up, as it enables better logging, better use of the `xlarge`
resource class, and also sets up Bazel's integrated flakiness
retry functionality.

PR Close #29106
2019-03-05 09:48:38 -08:00
Paul Gschwendtner 43ce6ec84a ci: print sauce-connect log output on timeout (#29084)
Currently when `sauce-connect` times out after 2min, we just
print a message saying that the SauceLabs tunnel didn't establish
within 2min. In order to make debugging easier, we now print the
full log file output on failure.

PR Close #29084
2019-03-04 10:10:28 -08:00
Paul Gschwendtner 58198075f2 ci: increase parallelism for "test_docs_examples" jobs (#28984)
Currently the docs example tests (`test_docs_examples_ivy`
and `test_docs_examples`) are the culprits for a slow-down
in our overall CI turnaround. We need to increase parallelism
in order to make our CI turnaround more _acceptable_. This is
temporary and the long-term goal is to move these tests to Bazel
with remote build execution.

References #28940

PR Close #28984
2019-02-28 10:46:12 -08:00
Paul Gschwendtner 2e43e15e12 ci: "test_docs_examples_ivy" should attach ivy package output (#28984)
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to run the docs examples with Ivy.

PR Close #28984
2019-02-28 10:46:12 -08:00
George Kalpakas d207c4894a ci: speed up `publish_artifacts` CircleCI job for PRs (#29028)
PR Close #29028
2019-02-28 10:39:18 -08:00
Filipe Silva 3d48cde3b1 ci: add bazel_repository_cache to CircleCI workspace (#28935)
PR Close #28935
2019-02-25 08:14:49 -08:00
Filipe Silva 61495a138d ci: rename install job to setup (#28935)
Followup to https://github.com/angular/angular/pull/28928#pullrequestreview-207023800

PR Close #28935
2019-02-25 08:14:49 -08:00
Greg Magolan 10ba91b1d3 build: fix saucelabs_test cronjob in CI (#28939)
PR Close #28939
2019-02-22 16:21:43 -08:00
Filipe Silva f0989b786b ci: share data between jobs using workspaces (#28928)
PR Close #28928
2019-02-22 13:24:11 -08:00
Greg Magolan 3144bf4d73 build: fix CI config typo (#27721)
PR Close #27721
2019-02-22 13:07:08 -08:00
Greg Magolan 75357ecb32 build(bazel): run a number of web tests with karma_web_test in saucelabs in CircleCI (#27721)
PR Close #27721
2019-02-22 13:07:08 -08:00
Paul Gschwendtner 82820b0b2c ci: run saucelabs legacy tests every hour (#28903)
Initially when we introduced the cronjob for Saucelabs,
we specified that the tests should run every 4h. Since the
caretaker needs more recent results when merging PRs
or before creating a release, we should run the saucelabs
tests every hour. This still ensures that PRs are not
affected by Saucelabs flakiness or incidents, and
the caretaker can also react better to real browser
failures (and isn't blocked on a 4h time frame)

PR Close #28903
2019-02-22 09:52:06 -08:00
Filipe Silva 94223a09e5 ci: update circleci post checkout to v2 syntax (#28472)
The `post` key is part of the CircleCI 1.0 syntax is not available in the 2.0 syntax.

PR Close #28472
2019-02-21 22:17:38 -08:00
George Kalpakas 3f2b51b837 ci: make yarn globally available and independent of `$BASH_ENV` (#28889)
Previously, our yarn (which overwrote the pre-installed yarn on the
docker image) was only available through `$BASH_ENV` (as an exported
function). This caused it to be undefined for commands executed in other
shells (e.g. via Node.js' `child_process.spawn()` unless explicitly
configuring it to run with `bash`).

This commit fixes this by making our yarn version available globally via
a symlink (`/usr/local/bin/yarn`).

(This was accidentally broken in #28839.)

PR Close #28889
2019-02-21 12:37:53 -08:00
Paul Gschwendtner 13b96ac91d ci: run saucelabs unit tests as cronjob (#28787)
We no longer want to run Saucelabs for every PR/commit because
Saucelabs has been very flaky recently and it blocks most of the
PRs with a flaky failing state that we cannot fix most of the time due
to upstream Saucelabs failures/incidents. Since real browsers tests
rarely catch browser-specific failures (same as in Material), we should
only run Saucelabs in a cronjob on the upstream branches. This still
ensures/guarantees our browser compatibility, but makes our CI
more stable and the PR workflow more productive.

PR Close #28787
2019-02-20 16:45:59 -08:00
Paul Gschwendtner 623fd3fb5e build: remove legacy-unit-tests-local job (#28703)
Since all unit tests are now run with Bazel, we can remove
the local legacy unit tests job. We still need to keep the
Saucelabs legacy job until we can run all of these web
unit tests with Saucelabs and Bazel.

PR Close #28703
2019-02-20 16:31:48 -08:00
Alex Eagle 1832e0f293 build: use vendored yarn under Bazel (#28839)
PR Close #28839
2019-02-20 09:19:03 -08:00
Alex Eagle 9cecb0b5d2 ci: Vendor yarn into our repo (#28839)
This avoids a dynamic dependency on fetching a package from the internet in our CI.
We have observed that this is not 100% reliable.

PR Close #28839
2019-02-20 09:19:03 -08:00
Paul Gschwendtner 00a8b07896 ci: combine "define_env_vars" and "download_yarn" anchor (#28788)
As discussed in https://github.com/angular/angular/pull/28546#discussion_r254068014, we want to combine the
`define_env_vars` and `download_yarn` anchor since downloading Yarn depends on setting up the
environment variables. In addition this simplifies our setup and reduces code-duplication.

PR Close #28788
2019-02-19 12:39:45 -08:00
Paul Gschwendtner dba2a406fd build: remove legacy e2e tests job (#28645)
Now that all e2e integration tests within `modules/` have been
migrated to Bazel, we can remove the legacy e2e tests job.

PR Close #28645
2019-02-13 12:15:02 -08:00
Brandon 99e3a04ea2 ci(docs-infra): test docs examples with Ivy (#28463)
PR Close #28463
2019-02-11 17:16:52 +00:00
Filipe Silva 4b7264f60f ci: use fallback caches (#28545)
This PR adds fallback cache hits for partial cache restoration.

PR Close #28545
2019-02-07 16:45:53 -08:00
George Kalpakas e3032a0d17 ci(docs-infra): ensure `aio_monitoring` failure notifications do not depend on earlier steps (#28555)
Previously, in order for the `aio_monitoring` failure notifications to
work, the steps up to `define_env_vars` should have succeeded. This
meant that any failures in earlier steps would not send notifications.

This commit fixes it by making the notification step independent of the
`define_env_vars` step.

PR Close #28555
2019-02-06 06:21:58 -08:00
George Kalpakas 01bb3c5820 ci: save the cache in `build-npm-packages` job instead of `test` (#28555)
In most cases, it doesn't make a difference, because the cache does
already exist and is not saved. In the few cases where the dependencies
change (and the cache needs to be updated), it makes more sense to save
the cache in the `build-npm-packages` job, because most jobs depend on
it and thus will be able to take advantage of the updated cache right
away.

This seems to be an oversight in b26ac1c22.

PR Close #28555
2019-02-06 06:21:58 -08:00
George Kalpakas 43467c95ab ci: run the `yarn_install` step when necessary (#28555)
PR Close #28555
2019-02-06 06:21:58 -08:00
George Kalpakas 69ecb96569 refactor: use steps consistently in CircleCI config (#28555)
PR Close #28555
2019-02-06 06:21:58 -08:00
George Kalpakas e991d825f5 ci(docs-infra): fix `download_yarn` in `aio_monitoring` (#28555)
The `download_yarn` step depends on the `CI_YARN_VERSION` environment
variable and thus has to be run after the `define_env_vars` step.
Accidentally broken in [#28546][1].

[1]: https://github.com/angular/angular/pull/28546/files#diff-1d37e48f9ceff6d8030570cd36286a61R447

PR Close #28555
2019-02-06 06:21:58 -08:00
Matias Niemelä 979582a2ed build: add some debug info for yarn installs (#28553)
PR Close #28553
2019-02-05 20:15:49 -05:00
Paul Gschwendtner 8d11627e6c build: update yarn to v1.13.0 (#28546)
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.

Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)

PR Close #28546
2019-02-05 16:48:56 -05:00
George Kalpakas 9ef8d2b823 ci: keep job alive when yarn request takes more than 10 minutes (#28458)
Occasionally, yarn's requests take more than 10 minutes to
complete/fail, by which time CircleCI jobs due to no output.

This commit works around the issue by periodically printing something to
stdout.

PR Close #28458
2019-02-05 13:07:41 -05:00