Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
This commit moves the `setLContainerActiveIndex` and `getLContainerActiveIndex` functions used in a few files to a common `util/view_util.ts` lib to avoid cyclical dependency while importing `instructions/container.ts` where these functions located originally.
PR Close#33831
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
The `ngInjectableDef` property was renamed to `ɵprov`, but core must
still support both because there are published libraries that use the
older term.
We are only interested in such properties that are defined directly on
the type being injected, not on base classes. So there is a check that
the defintion is specifically for the given type.
Previously if you tried to inject a class that had `ngInjectableDef` but
also inherited `ɵprov` then the check would fail on the `ɵprov` property
and never even try the `ngInjectableDef` property resulting in a failed
injection.
This commit fixes this by attempting to find each of the properties
independently.
Fixes https://github.com/angular/ngcc-validation/pull/526
PR Close#33732
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.
PR Close#33706
Prior to this patch all the styling benchmarks only tested for
template map-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate map-based styling bindings.
This benchmark introduces benchmarking for map-based style/class bindings
that are evaluated from both template bindings as well as directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33608
Prior to this patch all the styling benchmarks only tested for
template-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate bindings. This benchmark introduces
style/class bindings being evaluated from both a template and from
various directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33600
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
This issue was found when debugging a test failure that was using lazy
loaded modules with the router. When doing this, the router calls
`NgModuleFactory.create` for the loaded module. This module gets a new
injector so the overrides provided in TestBed are not applied unless the
Injectable is in the providers list (which is not the case for
{providedIn...} Injectables).
PR Close#33606
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
PR Close#33607
This patch gets rid of the configuration settings present in the
`TStylingContext` array that is used within the styling algorithm
for `[style]`, `[style.prop]`, `[class]` and `[class.name]` bindings.
These configurations now all live inside of the `TNodeFlags`.
PR Close#33540
This patch removes the need to lock the style and class context
instances to track when bindings can be added. What happens now is
that the `tNode.firstUpdatePass` is used to track when bindings are
registered on the context instances.
PR Close#33521
The `renderer-to-renderer2` migration currently does not work
properly in v9 because the migration relies on the type checker
for detecting references to `Renderer` from `@angular/core`.
This is contradictory since the `Renderer` is no longer
exported in v9 `@angular/core`. In order to make sure that
the migration still works in v9, and that we can rely on the
type checker for the best possible detection, we take advantage
of module augmentation and in-memory add the `Renderer` export
to the `@angular/core` module.
PR Close#33571
Currently TypeScript projects with an invalid tsconfig configuration,
cause the undecorated-classes-with-di migration to throw. Instead we
should gracefully exit the migration (like we do for syntactical
diagnostics), but report that there are configuration issues.
This issue surfaced when testing this migration in combination
with the Angular CLI migrations. One of the CLI migrations currently
causes invalid tsconfig files which then cause this issue in the
undecorated-classes-with-di migration.
PR Close#33567
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
To support compile time localization, we need to be
able to provide the locales via a well known global property.
This commit changes `getLocaleData()` so that it will attempt
to read the local from the global `ng.common.locales` if the
locale has not already been registered via `registerLocaleData()`.
PR Close#33523
To limit the exposure of the private `LOCALE_DATA` from outside
`@angular/core` this commit exposes private functions in the core
to hide the internal structures better.
* The `registerLocaleData()` implementation has moved from
`@angular/common` to `@angular/core`. A stub that delegates to
core has been left in common for backward compatibility.
* A new `ɵunregisterLocaleData()` function has been provided,
which is particularly useful in tests to clear out registered locales
to prevent subsequent tests from being affected.
* A private export of `ɵregisterLocaleData()` has been removed
from `@angular/common`. This was not being used and is accessible
via `@angular/core` anyway.
PR Close#33523
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
We already store a reference to a native host of a component
view so we can drop the getHostNative utility function (that
was getting the same reference from another data structure).
PR Close#33554
In ViewEngine we used to throw an error if we encountered an unknown element while rendering. We have this already for Ivy in AoT, but we didn't in JiT. These changes implement the error for JiT mode.
PR Close#33419
The 4b81bb5c97 patch seemingly broke the
`profile_all.js` file due to the file renaming. This patch restores the
functionality of said script.
PR Close#33494
Before this change instantiating multiple directives on the same
host node would result in repeated RNode retrieval and patching.
This commint re-organises code around directive instance creation
so the host node processing (common to all directives) happens
once and only once.
As the additional benefit the directive instantiation logic gets
centralised in one function (at the expense of patching logic
duplication for root node).
PR Close#33322
Currently if one of the project targets could not be analyzed
due to AOT compiler program failures, we gracefully proceed
with the migration. This is expected, but we should not
print a message at the end of the migration that the migration
was _successful_. The migration was only done partially, hence
it's potentially incomplete and we should make it clear that once
the failures are resolved, the migration should be re-run.
PR Close#33315
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Prior to this commit, i18n logic which ensures that elements removed in a translation are also removed in DOM, didn't take into account the fact that elements may have local refs. As a result, remove operation failed, since there is no corresponding tNode found. This commit updates the logic to skip all local refs while going though the list of nodes to ensure that DOM matches elements present in translation.
PR Close#33415
With the next version of the CLI we don't need to add logging for the description of the schematic as part of the schematic itself.
This is because now, the CLI will print the description defined in the `migrations.json` file.
See: https://github.com/angular/angular-cli/pull/15951
PR Close#33440
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
Currently the `missing-injectable` migration seems to add
`@Injectable()` to third-party classes in type definitions.
This not an issue in general since we do not generate broken code
by inserting a decorator into a type definition file. Though, we can
avoid adding the decorator since it won't have any effect and in
general we should not write to non source files of the compilation unit.
PR Close#33286
We should not migrate the reference from `useExisting`. This is because
developers can only use the `useExisting` value as a token. e.g.
```ts
@NgModule({
providers: [
{provide: AppRippleConfig, useValue: rippleOptions},
{provide: MAT_RIPPLE_OPTIONS, useExisting: AppRippleConfig},
]
})
export class AppModule {}
```
In the case above, nothing should be decorated with `@Injectable`. The
`AppRippleConfig` class is just used as a token for injection.
PR Close#33286
Currently the migration is unable to migrate instances where
the provider definition uses `forwardRef`. Since this is a
common pattern, we should support that from within the migration.
The solution to the problem is adding a foreign function resolver
to the `PartialEvaluator`. This basically matches the usage of
the static evaluation that is used by the ngtsc annotations.
PR Close#33286
this makes running and profiling tests much easier. Example usage:
```
yarn bazel run --define=compile=aot //packages/core/test/render3/perf:noop_change_detection
```
See README.md update for more info.
PS: I considered moving the ng_rollup bundle into the macro but I didn't want to make
too many changes in this PR. If we find running benchmarks in this way useful, we
should refactor the build file more, and move the ng_rollup_bundle targets into the
macro.
PR Close#33389
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
For abstract directives, i.e. directives without a selector, it may
happen that their constructor is called explicitly from a subclass,
hence its parameters are not required to be valid for Angular's DI
purposes. Prior to this commit however, having an abstract directive
with a constructor that has parameters that are not eligible for
Angular's DI would produce a compilation error.
A similar scenario may occur for `@Injectable`s, where an explicit
`use*` definition allows for the constructor to be irrelevant. For
example, the situation where `useFactory` is specified allows for the
constructor to be called explicitly with any value, so its constructor
parameters are not required to be valid. For `@Injectable`s this is
handled by generating a DI factory function that throws.
This commit implements the same solution for abstract directives, such
that a compilation error is avoided while still producing an error at
runtime if the type is instantiated implicitly by Angular's DI
mechanism.
Fixes#32981
PR Close#32987
The styling algorithm requires that the `RNode` has a `className`
property in order to execute the fast-path. This changes adds the
emulation of this property.
PR Close#33392
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
Recently it was made possible to have a directive without selector,
which are referred to as abstract directives. Such directives should not
be registered in an NgModule, but can still contain decorators for
inputs, outputs, queries, etc. The information from these decorators and
the `@Directive()` decorator itself needs to be registered with the
central `MetadataRegistry` so that other areas of the compiler can
request information about a given directive, an example of which is the
template type checker that needs to know about the inputs and outputs of
directives.
Prior to this change, however, abstract directives would only register
themselves with the `MetadataRegistry` as being an abstract directive,
without all of its other metadata like inputs and outputs. This meant
that the template type checker was unable to resolve the inputs and
outputs of these abstract directives, therefore failing to check them
correctly. The typical error would be that some property does not exist
on a DOM element, whereas said property should have been bound to the
abstract directive's input.
This commit fixes the problem by always registering the metadata of a
directive or component with the `MetadataRegistry`. Tests have been
added to ensure abstract directives are handled correctly in the
template type checker, together with tests to verify the form of
abstract directives in declaration files.
Fixes#30080
PR Close#33131
In the post-$localize world the current locale value is defined by setting
`$localize.locale` which is then read at runtime by Angular in the provider
for the `LOCALE_ID` token and also passed to the ivy machinery via`setLocaleId()`.
The $localize compile-time inlining tooling can replace occurrences of
`$localize.locale` with a string literal, similar to how translations
are inlined.
// FW-1639
See https://github.com/angular/angular-cli/issues/15896
PR Close#33314
Decrease `MIN_SAMPLE_DURATION` to make it more likely that we cane fit into single time slice.
Increase `MIN_SAMPLE_COUNT_NO_IMPROVEMENT` to make it more likely to find the best
PR Close#33341
change the existing implementation from using
```
string.split(/\s+/);
```
to a char scan which performers the same thing.
The reason why `split(/\s+/)` is slow is that:
- `/\s+/` allocates new `RegExp` every time this code executes.
- `RegExp` scans are a lot more expensive because they are more powerful.
PR Close#33326
Static methods that return a type of ModuleWithProviders currently
do not have to specify a type because the generic falls back to any.
This is problematic because the type of the actual module being
returned is not present in the type information.
Since Ivy uses d.ts files exclusively for downstream packages
(rather than metadata.json files, for example), we no longer have
the type of the actual module being created.
For this reason, a generic type should be added for
ModuleWithProviders that specifies the module type. This will be
required for all users in v10, but will only be necessary for
users of Ivy in v9.
PR Close#33217
Angular v9 schematics should print out a link to the migration
guide associated with each schematic. This way, users have an
easy way to find more information about the automatic code
transformations they will see with `ng update`.
PR Close#33258
With Ivy the `entryComponents` array isn't necessary anymore. These changes mark it as deprecated so that it can be removed in a future version.
PR Close#33205
Until now, the template type checker has not checked any of the event
bindings that could be present on an element, for example
```
<my-cmp
(changed)="handleChange($event)"
(click)="handleClick($event)"></my-cmp>
```
has two event bindings: the `change` event corresponding with an
`@Output()` on the `my-cmp` component and the `click` DOM event.
This commit adds functionality to the template type checker in order to
type check both kind of event bindings. This means that the correctness
of the bindings expressions, as well as the type of the `$event`
variable will now be taken into account during template type checking.
Resolves FW-1598
PR Close#33125
Prior to this fix if a map-based class or style binding wrote
its values onto an elemenent, the internal styling context would
not register the binding if the initial value as a `NO_CHANGE`
value. This situation occurs if a directive takes control of the
`class` or `style` input values and then returns a `NO_CHANGE` value
if the initial value is empty.
This patch ensures that all bindings are always registered with the
`TStylingContext` data-structure even if their initial value is
an instance of `NO_CHANGE`.
PR Close#33236
Prior to this fix, all style/class bindings (e.g. `[style]` and
`[class.foo]`) would quietly update a binding value if and when the
current binding value changes during checkNoChanges.
With this patch, all styling instructions will properly check to see
if the value has changed during the second pass of detectChanges()
if checkNoChanges is active.
PR Close#33103
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
LocaleID defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngLocaleIdDef to loc. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33212
Turns out that writing to global state is more expensive than writing to
a property on an object.
Slower:
````
let count = 0;
function increment() {
count++;
}
```
Faster:
````
const state = {
count: 0
};
function increment() {
state.count++;
}
```
This change moves all of the instruction state into a single state object.
`noop_change_detection` benchmark
Pre refactoring: 16.7 us
Post refactoring: 14.523 us (-13.3%)
PR Close#33093
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
This patch introduces the `printTable()` and `printSources()`
methods to `DebugStylingContext` which can be used via the
`window.ng.getDebugNode` helpers when debugging an application.
PR Close#33179
Injectable defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectableDef to "prov" (for "provider", since injector defs
are known as "inj"). This is because property names cannot
be minified by Uglify without turning on property mangling
(which most apps have turned off) and are thus size-sensitive.
PR Close#33151
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33151
This change assures that data structures related to initial inputs
(ones set from static attributes) are created only once (during the
first template pass) and no additional runtime checks are done for
subsequent passes.
Additionally this commit changes the data structure used by initial inputs
on TNode - previously initial inputs for a directive were stored at the
directive index in LView. This meant that an array holding initial inputs
was relativelly big and had many null elements (as placeholders for elements,
directives, injector etc.). After the change we only create an array of a size
equal to a number of directives matched on a given TNode.
For the `directive_instantiate` benchmark it boils to allocating a 1-element
array vs. 100-element array previously.
PR Close#33195
Prior to this commit, Ivy runtime asserted that a given element is an instance of a DOM node. These asserts may not be correct in case custom renderer is used, which operates objects with a shape different than DOM nodes. This commit updates the code to avoid the mentioned checks in case procedural renderer is used.
PR Close#33156
Prior to this patch, if a map-class binding is applied directly then
that value will be incorrectly provided a sanitizer even if there is no
sanitization present for an element.
PR Close#33154
Pawel Kozlowski
Adam Plumer
Alex Rickabaugh
Andrew Kushnir
JoostK
Misko Hevery
Jithil P Ponnan
Andrew Scott
Kristiyan Kostadinov
Pete Bacon Darwin
zuckjet
Feliks Khantsis
Danny Skoog
Paul Gschwendtner
Alan Agius
Christopher Dahm
Greg Magolan
Joey Perrott
Kara Erickson
Igor Minar
Judy Bogart
horn
Lars Gyrup Brink Nielsen
mohax
Filipe Silva
NothingEverHappens
JiaLiPassion
Matias Niemelä
Michael Prentice
Kapunahele Wong
vikerman