Currently the "routing" playground example fails the e2e tests
because it tries to load the OpenSans font using an external
HTTP request. External http requests are not allowed (unless
explicitly enabled) within Bazel in order to ensure that
all targets are built and tested in a hermetic way.
In order to work around this issue in a Bazel idiomatic way,
we just vendor the fonts in the "third_party" folder. Note
that we can technically also enable internet for the RBE
host platform, but it's not a best practice for hermeticity.
The following syntax would allow us to enable internet for
RBE (stated here for tracking)
```
properties: {
name: "dockerNetwork"
value: "standard"
}
```
PR Close#28490
With ed1ba88ffd9d0fc266808413fa517e7a31943bc8 we switched the
examples to run with Bazel. This means that we can now also run the
e2e tests for these examples against Ivy. All playground e2e tests,
**except** the `web_worker` examples, successfully run with Ivy.
The failing webworker e2e tests have been temporarily disabled with
`fixmeIvy` and need to be investigated in a follow-up.
PR Close#28490
The `upgrade` playground example has been disabled for a
long time because Protractor initially didn't support running
hybrid apps. Now that we use a more recent version of Protractor
that handles hybrid apps (also automatically), we can re-enable
this long-standing disabled test.
Additionally the e2e test logic was outdated and failed because a
CSS selector did not match the template of the upgrade example.
With this change, the CSS selector has been updated to match the
example's template, and also the test has been updated slightly
to also ensure that content projection works.
PR Close#28490
Currently when someone serves the "person_management" playground
example, there will be runtime exceptions by `@angular/forms` if
someone clicks on one of the two buttons rendered in the example.
This happens because the example is outdated and the input elements
using `ngModel` do not specify a proper "name" while being inside of
a `<form>` element. A name is required inside of a form. The failure
is not specific to Ivy and is not covered by any test because the e2e
tests for this example are just asserting that the page properly loads
(the error only shows up one of the buttons has been clicked)
This is the reason why these errors were never visibile to the e2e tests.
Though in order to make this example work, we should this fix these failures
so that the example can work as expected.
```
FullNameComponent.html:7 ERROR Error: If ngModel is used within a form tag, either the name attribute must be set or the form
control must be defined as 'standalone' in ngModelOptions.
Example 1: <input [(ngModel)]="person.firstName" name="first">
Example 2: <input [(ngModel)]="person.firstName" [ngModelOptions]="{standalone: true}">
at Function.TemplateDrivenErrors.missingNameException (template_driven_errors.ts:40)
at NgModel._checkName (ng_model.ts:319)
at NgModel._checkForErrors (ng_model.ts:302)
at NgModel.ngOnChanges (ng_model.ts:215)
at Object.checkAndUpdateDirectiveInline (provider.ts:208)
at checkAndUpdateNodeInline (view.ts:429)
at checkAndUpdateNode (view.ts:389)
at debugCheckAndUpdateNode (services.ts:431)
at debugCheckDirectivesFn (services.ts:392)
at Object.eval [as updateDirectives] (FullNameComponent.html:7)
```
PR Close#28490
Currently all playground examples are built with `tsc`
and served with the `gulp serve` task. In order to be able
to test these examples easily with Ivy, we now build and
serve the examples using Bazel. This allows us to expand our
Ivy test coverage and additionally it allows us to move forward
with the overall Bazel migration. Building & serving individual
examples is now very easy and doesn't involve building everything
inside of `/modules`.
PR Close#28490
Currently we depend on the "rules_webtesting" version that is
installed by "rules_typescript//:package.bzl". This version of
the webtesting rules comes with a very old version of Chromium
and the `chromedriver` that does not support capturing console
errors properly (with stack traces). Since we have a few e2e
tests that depend on console output (e.g. playground/src/source-map),
we need to make sure that these tests can pass upon Bazel
migration.
PR Close#28490
the polymer benchmarks are super old and not relevant any more
and these benchmarks were the only reason why we needed bower at all
so long, bower. thanks for all the fish.
PR Close#27931
This target fails with odd error that we need to investigate:
[01:19:32] I/direct - Using ChromeDriver directly...
[01:19:32] E/direct - Error code: 135
[01:19:32] E/direct - Error message: Could not find chromedriver at /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/external/ngdeps/node_modules/webdriver-manager/selenium/chromedriver_2.41. Run 'webdriver-manager update' to download binaries.
[01:19:32] E/direct - Error: Could not find chromedriver at /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/external/ngdeps/node_modules/webdriver-manager/selenium/chromedriver_2.41. Run 'webdriver-manager update' to download binaries.
PR Close#26735
These tests were previously not running on CI so they have always been broken,
or got broken just recently :-(.
test(ivy): mark failing test targets with fixme-ivy-jit and fixme-ivy-local tags
PR Close#26735
This commit also removes the extra jasminewd2 typings, since the changes
have been merged in the official typings with
DefinitelyTyped/DefinitelyTyped#28957.
PR Close#26139
Previously in Ivy, metadata for directives/components/modules/etc was
carried in .d.ts files inside type information encoded on the
DirectiveDef, ComponentDef, NgModuleDef, etc types of Ivy definition
fields. This works well, but has the side effect of complicating Ivy's
runtime code as these extra generic type parameters had to be specified
as <any> throughout the codebase. *DefInternal types were introduced
previously to mitigate this issue, but that's the wrong way to solve
the problem.
This commit returns *Def types to their original form, with no metadata
attached. Instead, new *DefWithMeta types are introduced that alias the
plain definition types and add extra generic parameters. This way the
only code that needs to deal with the extra metadata parameters is the
compiler code that reads and writes them - the existence of this metadata
is transparent to the runtime, as it should be.
PR Close#26203
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
This change supports compilation of components, directives, and modules
within ngtsc. Support is not complete, but is enough to compile and test
//packages/core/test/bundling/todo in full AOT mode. Code size benefits
are not yet achieved as //packages/core itself does not get compiled, and
some decorators (e.g. @Input) are not stripped, leading to unwanted code
being retained by the tree-shaker. This will be improved in future commits.
PR Close#24427
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
Paul Gschwendtner
Daniel Ruf
Igor Minar
Greg Magolan
Alex Rickabaugh
Kara Erickson
George Kalpakas
Matias Niemelä
Rob Wormald
Miško Hevery
Veres Lajos