Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Prior to this commit, the check that verifies correct "id" field type was too strict and didn't allow `module.id` as @NgModule's "id" field value. This change adds a special handling for `module.id` and uses it as id of @NgModule if specified.
PR Close#30040
Now that ngtsc performs type checking using a dedicated `__ng_typecheck__.ts`
file, `NgtscProgram` always wraps its `ts.CompilerHost` in a shim host. This
shim fails to delegate `resolveModuleNames` so no custom module resolution
logic is considered. This introduces a problem for the CLI, as the compiler
host it passes kicks of ngcc for any imported module such that Ivy's
compatibility compiler runs automatically behind the scenes.
This commit adds delegation of the `resolveModuleNames` to fix the issue.
Fixes#30064
PR Close#30068
Previously, an instance of HttpParams would retain its list of mutations
after they have been materialized as a result of a read operation. Not
only does this unnecessarily hold onto memory, more importantly does it
introduce a bug where branching of off a materialized instance would
reconsider the set of mutations that had already been applied, resulting
in repeated application of mutations.
This commit fixes the bug by clearing the list of pending mutations
after they have been materialized, such that they will not be considered
once again for branched off instances.
Fixes#20430
PR Close#29045
Currently when someone runs `ng update` with the static-query migration,
the migration can fail with an error saying that the `AOT` compiler could not
be created. This can happen if the CLI project contains a test `tsconfig.json`
that is picked up by the schematic.
Due to the fact that spec tsconfig files cannot be ran with NGC (e.g. test
components are not part of a module; not all source files are guaranteed to
be included), test `tsconfig` projects will now use a new `test` migration
strategy where all queries within tests are left untouched and a TODO is added.
PR Close#30034
This commit unifies the way auxillary RootScopeModule and DynamicTestModule are compiled in R3TestBed by calling `compileNgModuleDefs` explicitly for RootScopeModule. This change also resolves the problem where TestBed's code was used from the @angular/core NPM package: due to the "jit" flag, the @NgModule decorator on the RootScopeModule was transformed to RootScopeModule.decorators = [...], but actual ngModuleDef was never defined.
PR Close#30037
The compiler uses metadata to represent what it statically knows about
various expressions in a program. Occasionally, expressions in the program
for which metadata is extracted may contain sub-expressions which are not
representable in metadata. One such construct is an arrow function.
The compiler does not always need to understand such expressions completely.
For example, for a provider defined with `useValue`, the compiler does not
need to understand the value at all, only the outer provider definition. In
this case, the compiler employs a technique known as "expression lowering",
where it rewrites the provider expression into one that can be represented
in metadata. Chiefly, this involves extracting out the dynamic part (the
`useValue` expression) into an exported constant.
Lowering is applied through a heuristic, which considers the containing
statement as well as the field name of the expression.
Previously, this heuristic was not completely accurate in the case of
route definitions and the `loadChildren` field, which is lowered. If the
route definition using `loadChildren` existed inside a decorator invocation,
lowering was performed correctly. However, if it existed inside a standalone
variable declaration with an export keyword, the heuristic would conclude
that lowering was unnecessary. For ordinary providers this is true; however
the compiler attempts to fully understand the ROUTES token and thus even if
an array of routes is declared in an exported variable, any `loadChildren`
expressions within still need to be lowered.
This commit enables lowering of already exported variables under a limited
set of conditions (where the initializer expression is of a specific form).
This should enable the use of `loadChildren` in route definitions.
PR Close#30038
Previously, a template's context name would only be included in an embedded
template function if the element that the template was declared on has a
tag name. This is generally true for elements, except for `ng-content`
that does not have a tag name. By omitting the context name the compiler
could introduce duplicate template function names, which would fail at runtime.
This commit fixes the behavior by always including the context name in the
template function's name, regardless of tag name.
Resolves FW-1272
PR Close#30025
Previously, ngcc would insert new imports at the beginning of the file, for
convenience. This is problematic for imports that have side-effects, as the
side-effects imposed by such imports may affect the behavior of subsequent
imports.
This commit teaches ngcc to insert imports after any existing imports. Special
care has been taken to ensure inserted constants will still follow after the
inserted imports.
Resolves FW-1271
PR Close#30029
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Currently the `template-var-assignment` migration incorrectly warns if
the template writes to a property in the component that has the same
`ast.PropertyWrite´ name as a template input variable but different
receiver. e.g.
```html
<!-- "someProp.element" will be incorrectly reported as template variable assignment -->
<button *ngFor="let element of list" (click)="someProp.element = null">Reset</button>
```
Similarly if an output writes to a component property with the same name as a
template input variable, but the expression is within a different template scope,
the schematic currently incorrectly warns. e.g.
```html
<button *ngFor="let element of list">{{element}}</button>
<!-- The "element = null" expression does not refer to the "element" template input variable -->
<button (click)="element = null"></button>
```
PR Close#30026
Previously, we had a bug where directive matching could fail if the directive
attribute was bound and followed a certain number of classes. This is because
in the matching logic, we were treating classes like normal attributes. We
should instead be skipping classes in the attribute matching logic. Otherwise
classes will match for directives with attribute selectors, and as we are
iterating through them in twos (when they are stored as name-only, not in
name-value pairs), it may throw off directive matching for any bound attributes
that come after. This commit changes the directive matching logic to skip
classes altogether.
PR Close#30002
`ng build` by default builds the prodapp because there is not
a dev build in Bazel. This PR restores the `--prod` to do the
same to prevent achitect from showing missing config error.
PR Close#30005
Previously, all of a program's files would be copied into the __ivy_ngcc__
folder where ngcc then writes its modifications into. The set of source files
in a program however is much larger than the source files contained within
the entry-point of interest, so many more files were copied than necessary.
Even worse, it may occur that an unrelated file in the program would collide
with an already existing source file, resulting in incorrectly overwriting
a file with unrelated content. This behavior has actually been observed
with @angular/animations and @angular/platform-browser/animations, where
the former package would overwrite declaration files of the latter package.
This commit fixes the issue by only copying relevant source files when cloning
a bundle's content into __ivy_ngcc__.
Fixes#29960
PR Close#30020
Previously, during the evaluation of a function call where no argument
was provided for a parameter that has a default value, the default value
would be taken from the context of the caller, instead of the callee.
This commit fixes the behavior by resolving the default value of a
parameter in the context of the callee.
PR Close#29888
Previously, ngtsc's static evaluator did not take spread operators into
account when evaluating function calls, nor did it handle rest arguments
correctly. This commit adds support for static evaluation of these
language features.
PR Close#29888
We only set ng-reflect properties on directive input bindings.
This PR ensures that we also add ng-reflect properties on unbound inputs for backwards compatibility.
FW-1266 #resolve
PR Close#29973
Template type-checking is enabled by default in the View Engine compiler.
The feature in Ivy is not quite ready for this yet, so this flag will
temporarily control whether templates are type-checked in ngtsc.
The goal is to remove this flag after rolling out template type-checking in
google3 in Ivy mode, and making sure the feature is as compatible with the
View Engine implementation as possible.
Initially, the default value of the flag will leave checking disabled.
PR Close#29698
Previously, Template.templateAttrs was introduced to capture attribute
bindings which originated from microsyntax (e.g. bindings in *ngFor="...").
This means that a Template node can have two different structures, depending
on whether it originated from microsyntax or from a literal <ng-template>.
In the literal case, the node behaves much like an Element node, it has
attributes, inputs, and outputs which determine which directives apply.
In the microsyntax case, though, only the templateAttrs should be used
to determine which directives apply.
Previously, both the t2_binder and the TemplateDefinitionBuilder were using
the wrong set of attributes to match directives - combining the attributes,
inputs, outputs, and templateAttrs of the Template node regardless of its
origin. In the TDB's case this wasn't a problem, since the TDB collects a
global Set of directives used in the template, so it didn't matter whether
the directive was also recognized on the <ng-template>. t2_binder's API
distinguishes between directives on specific nodes, though, so it's more
sensitive to mismatching.
In particular, this showed up as an assertion failure in template type-
checking in certain cases, when a directive was accidentally matched on
a microsyntax template element and also had a binding which referenced a
variable declared in the microsyntax. This resulted in the type-checker
attempting to generate a reference to a variable that didn't exist in that
scope.
The fix is to distinguish between the two cases and select the appropriate
set of attributes to match on accordingly.
Testing strategy: tested in the t2_binder tests.
PR Close#29698
This commit adds support for template type-checking a pipe binding which
previously was not handled by the type-checking engine. In compatibility
mode, the arguments to transform() are not checked and the type returned
by a pipe is 'any'. In full type-checking mode, the transform() method's
type signature is used to check the pipe usage and infer the return type
of the pipe.
Testing strategy: TCB tests included.
PR Close#29698
The template type-checking engine previously would assemble a type-checking
program by inserting Type Check Blocks (TCBs) into existing user files. This
approach proved expensive, as TypeScript has to re-parse and re-type-check
those files when processing the type-checking program.
Instead, a far more performant approach is to augment the program with a
single type-checking file, into which all TCBs are generated. Additionally,
type constructors are also inlined into this file.
This is not always possible - both TCBs and type constructors can sometimes
require inlining into user code, particularly if bound generic type
parameters are present, so the approach taken is actually a hybrid. These
operations are inlined if necessary, but are otherwise generated in a single
file.
It is critically important that the original program also include an empty
version of the type-checking file, otherwise the shape of the two programs
will be different and TypeScript will throw away all the old program
information. This leads to a painfully slow type checking pass, on the same
order as the original program creation. A shim to generate this file in the
original program is therefore added.
Testing strategy: this commit is largely a refactor with no externally
observable behavioral differences, and thus no tests are needed.
PR Close#29698
This commit adds support in the template type-checking engine for handling
the logical not operation and the safe navigation operation.
Safe navigation in particular is tricky, as the View Engine implementation
has a rather inconvenient flaw. View Engine checks a safe navigation
operation `a?.b` as:
```typescript
(a != null ? a!.b : null as any)
```
The type of this expression is always 'any', as the false branch of the
ternary has type 'any'. Thus, using null-safe navigation throws away the
type of the result, and breaks type-checking for the rest of the expression.
A flag is introduced in the type-checking configuration to allow Ivy to
mimic this behavior when needed.
Testing strategy: TCB tests included.
PR Close#29698
View Engine's implementation of naive template type-checking is less
advanced than the current Ivy implementation. As a result, Ivy catches lots
of typing bugs which VE does not. As a result, it's necessary to tone down
the Ivy template type-checker in the default case.
This commit introduces a mechanism for doing that, by passing a config to
the template type-checking engine. Through this configuration, particular
checks can be loosened or disabled entirely.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking code only considered the metadata of
directive classes actually referenced in the template. If those directives
had base classes, any inputs/outputs/etc of the base classes were not
tracked when generating the TCB. This resulted in bindings to those inputs
being incorrectly attributed to the host component or element.
This commit uses the new metadata package to follow directive inheritance
chains and use the full metadata for a directive for TCB generation.
Testing strategy: Template type-checking tests included.
PR Close#29698
Previously, metadata registration (the recording of collected metadata
during analysis of directives, pipes, and NgModules) was only used to
produce the `LocalModuleScope`, and thus was handled by the
`LocalModuleScopeRegistry`.
However, the template type-checker also needs information about registered
directives, outside of the NgModule scope determinations. Rather than
reuse the scope registry for an unintended purpose, this commit introduces
new abstractions for metadata registration and lookups in a separate
'metadata' package, which the scope registry implements.
This paves the way for a future commit to make use of this metadata for the
template type-checking system.
Testing strategy: this commit is a refactoring which introduces no new
functionality, so existing tests are sufficient.
PR Close#29698
Previously, bindings to [class] and [style] were treated like any other
property binding. That is, they would result in type-checking code that
attempted to write directly to .class or .style on the element node.
This is incorrect, however - the mapping from Angular's [class] and [style]
onto the DOM properties is non-trivial.
For now, this commit avoids the issue by only checking the expressions
themselves and not the assignment to the element properties.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking engine processed templates in a linear
manner, and could not handle '#' references within a template. One reason
for this is that '#' references are non-linear - a reference can be used
before its declaration. Consider the template:
```html
{{ref.value}}
<input #ref>
```
Accommodating this required refactoring the type-checking code generator to
be able to produce Type Check Block (TCB) code non-linearly. Now, each
template is processed and a list of TCB operations (`TcbOp`s) are created.
Non-linearity is modeled via dependencies between operations, with the
appropriate protection in place for circular dependencies.
Testing strategy: TCB tests included.
PR Close#29698
This commit adds support for the generation of type-checking expressions for
forms which were previously unsupported:
* array literals
* map literals
* keyed property accesses
* non-null assertions
Testing strategy: TCB tests included.
Fixes#29327
FW-1218 #resolve
PR Close#29698
This commit adds a test suite for the Type Check Block generation which
doesn't require running the entire compiler (specifically, it doesn't even
require the creation of a ts.Program).
PR Close#29698
This commit adds registration of AOT compiled NgModules that have 'id'
properties set in their metadata. Such modules have a call to
registerNgModuleType() emitted as part of compilation.
The JIT behavior of this code is already in place.
This is required for module loading systems (such as g3) which rely on
getModuleFactory().
PR Close#29980
Previous to this change, we assumed embedded views could only be created after
their parent template node had completed processing. As a result, we only set
up query logic for containers after directives on the node were created.
However, this assumption didn't take into account the case where a directive
on a template node could create views in its constructor.
This commit fixes query logic to work with views created in constructors.
In that case, we need to create a query container before the new view is
rendered so query results in the view aren't lost. But since the query container
is created before directives have completed processing, we also have to ensure
that query results gathered later on the template node are inserted before that
query container. Otherwise, query results in embedded views will clobber query
results on template nodes.
This splice mode may be slightly slower than the normal matching for queries on
containers, but we should only fall back to this strategy in the edge case where
views are created in constructors. (We should encourage developers to create
views in ngOnInit instead).
PR Close#29983
Prior to this change, components created via TestBed.createComponent in the same test were placed into the same root context, which caused problems in conjunction with fixture.autoDetectChanges usage in the same test. Specifically, change detection was triggered immediately for created component (starting from the 2nd one) even if it was not required/desired. This commit makes Ivy and VE behavior consistent: now every component created via TestBed.createComponent is isolated from each other. Current solution uses host element id naming convention, which is not ideal, but helps avoid public API surface changes at this point (we might revisit this approach later).
Note: this commit also adds extra tests to verify bootstrap and change detection behavior in case of multiple components in `bootstrap` array in @NgModule, to make sure this behavior is aligned between Ivy and VE.
PR Close#29981
Currently the `template-strategy` for the static query migration uses the
Angular compiler in order to determine the query timing. This is problematic
as the AngularCompilerProgram also collects metadata for referenced
component stylesheets which aren't necessarily present. e.g. in a CLI
project the component can reference a Sass file. It's not guaranteed
that the standalone Angular compiler plugin supports Sass without
custom logic that is brought in by the Angular CLI webpack plugin.
In order to avoid any failures for invalid stylesheets, we just disable
normalizing of all referenced stylesheets.
PR Close#29876
Currently there are two available migration strategies for the `static-query`
schematic. Both have benefits and negatives which depend on what the
developer prefers. Since we can't decide which migration strategy is the
best for a given project, the developer should be able to select a specific
strategy through a simple choice prompt.
In order to be able to use prompts in a migration schematic, we need to
take advantage of the "inquirer" package which is also used by the CLI
schematic prompts (schematic prompts are usually only statically defined
in the schema). Additionally the schematic needs to be made "async"
because with prompts the schematic can no longer execute synchronously
without implementing some logic that blocks the execution.
PR Close#29876
Currently for Angular Bazel projects, NGC needs to be run in the
"postinstall" NPM script in order to generate required summary files.
We need to update the postinstall `tsconfig` to not check/re-build the
`@angular/core` schematic code which has transitive dependencies
which are only available inside of a CLI project. As this is not guaranteed
to be the case with Angular Bazel projects, we need to make sure that
we don't check/re-build these files.
PR Close#29876
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)
This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.
With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.
Fixes#29806
PR Close#29809
Previously, ngtsc would fail to resolve `forwardRef` calls if they
contained additional parenthesis or casts. This commit changes the
behavior to first unwrap the AST nodes to see past such insignificant
nodes, resolving the issue.
Fixes#29639
PR Close#29886
Previously, only static evaluation of `Array.slice` was implemented in
ngtsc's static evaluator. This commit adds support for `Array.concat`.
Closes#29835
PR Close#29887
When compiling Angular classes, the compiler may decide to append statements with specific metadata that's only required for JIT. This includes things like decorator metadata as well as NgModule scope data.
When the compiler generates such calls, the call sites are marked with Uglify's PURE annotation, so the optimizer will remove them in production builds. However, Closure does not have the PURE (or similar) annotation. We have a utility function `noSideEffects` in the runtime for this purpose. This commit wraps `setClassMetadata` and `setNgModuleScope` function bodies in `noSideEffect` closures to allow Closure remove them.
PR Close#29947
The `TNode.cleanup` data structure can contain sequences of 4-element
sequence of entries (event handlers, directive outputs) mixed with
2-element sequence of entries (QueryList cleanup). Before this fix
we would always skip 4 elements in the `TNode.cleanup` while looking
up event handler cleanups. 4-element skips are not correct in case
of query cleanup presence and this commit corrects the algorithm to
jump 4 or 2 elements depending on a type of cleanup encountered.
PR Close#29957
If a component has its definition set by defineComponent (as opposed to
JIT getter), then it will generate a factory that uses directiveInject()
to retrieve its dependencies. This can be problematic in test code because
tests could use the injection utility before bootstrapping the component,
and directiveInject() relies on the view having been created.
This commit tweaks directiveInject() to fall back to inject() if the view
has not been created. This will allow injection to work in tests even if
it is called before the component is bootstrapped.
PR Close#29948
Previous to this commit, providing a component or directive in a test
module without @Injectable() would throw because the injectable factory
would not be found. Providing components in tests in addition to declaring
or importing them is not necessary, but it should not throw an error.
This commit ensures factory data is saved when component defs and directive
defs are created, which allows them to be processed by the module injector.
Note that bootstrapping is still required for this setup to work because
directiveInject() does not support cases where the view has not been
created. This case will be handled in a future commit.
PR Close#29945
We had a bug where event.preventDefault() was not always called if listeners
were coalesced. This is because we were overwriting the previous listener's
result every time we called the next listener, so listeners early in the chain
that returned false would be ignored and preventDefault would not be called.
This commit fixes that issue, so now preventDefault() is called if any listener
in a coalesced chain returns false. This brings us in line with View Engine
behavior.
PR Close#29934
The config path is an optional argument to `ts.parseJsonConfigFileContent`. When passed, it is added to the returned object as `options.configFilePath`, and `tsc` itself passes it in.
The new TS 3.4 [incremental](https://www.typescriptlang.org/docs/handbook/release-notes/typescript-3-4.html) build functionality relies on this property being present: 025d826339/src/compiler/emitter.ts (L56-L57)
When using The compiler-cli `readConfiguration` the config path option isn't passed, preventing consumers (like @ngtools/webpack) from obtaining a complete config object.
This PR fixes this omission and should allow JIT users of @ngtools/webpack to set the `incremental` option in their tsconfig and have it be used by the TS program.
I tested this in JIT and saw a small decrease in build times in a small project. In AOT the incremental option didn't seem to be used at all, due to how `ngc` uses the TS APIs.
Related to https://github.com/angular/angular-cli/issues/13941.
PR Close#29872
Overriding multi provider values (providers with `multi: true` flag) via TestBed require additional handling: all existing multi-provider values for the same token should be removed from the override list, so that they are not included into the final value of a given provider. This commit adds this logic to make sure we handle multi providers correctly.
PR Close#29919
Fix the following error with future Bazel version:
```
Invalid label: invalid target name 'internal/npm_package:npm_package.bzl': target names may not contain ':'
```
PR Close#29777
Because the styling context may be stored in a different location
and be apart of a sub array, reading the styling context each time
a host binding is evaluated is costly. This patch ensures that the
active styling context is cached so that multiple interactions with
styling bindings can easily retrieve the styling context efficiently.
PR Close#29818
Currently if there are multiple source files within a given
TypeScript source file, only the last template in the source
file is checked as we store templates in a `Map` with the
source file paths as keys.
This is problematic as multiple templates can live within the
same source file and we therefore accidentally overwrite
existing entries in the resolved templates map.
PR Close#29841
Introduces a new strategy for the `static-query` schematic that
is enabled by default. In order to provide a migration that works
for the most Angular applications and makes the upgrade as easy
as possible, the template strategy leverages the view engine
Angular compiler logic in order to determine the query timing
that is currently used within applications using view engine.
PR Close#29815
The `@angular/compiler` package currently contains the logic for determining whether
given queries are used statically or dynamically. This logic would be necessary in order
to build a schematic that leverages the Angular compiler API's in order to simulate the
query timing based on what ViewEngine computed at compilation-time/runtime.
Exporting the logic that is necessary to detect the timing should not affect the public
API as the `@angular/compiler` package is denoted as private in `PUBLIC_API.md`
PR Close#29815
In order to support multiple strategies for detecting the query timing, the
query usage logic has been moved into a query usage strategy.
PR Close#29815
`NodeJsSyncHost` is no longer provided by BuilderContext in
architect v2, and its usage caused subtle path resolution issues
in Windows.
This PR cleans up `@angular/bazel` builder to use all native path
and fs methods.
PR Close#29796
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Prior to this change, element attributes annotated with i18n- prefix were removed from element attribute list and processed separately by i18n-specific logic. This behavior is causing issues with directive matching, since attributes are not present in the list of attrs for matching purposes. This commit updates i18n logic to retain attributes in the main attribute list, thus allowing directive matching logic to work correctly.
PR Close#29856
In order to be backwards compatible with View Engine, Ivy should log
errors by default in the TestBed error handler rather than re-throwing
them. Re-throwing the errors is a breaking change that causes issues with
libraries like ngrx that have async behavior and custom error handling.
This logging approach has issues (for both VE and Ivy) because it can allow
tests to pass inappropriately if errors are thrown inside listeners. However,
since re-throwing would be breaking and requires a larger redesign, we should
wait until post-Ivy.
PR Close#29853
Previously, this check was done with bracket property access on the
global object: global['goog']
This will not be minified when Closure compiles this code, which:
1) breaks, because 'goog' will have been minified but the check won't have
taken that into consideration
2) causes build failures in g3, because the actual property 'goog' is
forbidden in some published JS code (to ensure obfuscation).
A TODO is added to validate that this logic is correct, as it's difficult to
test within the Angular repo.
PR Close#29873
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
The code failed presubmit in google3 because the original ts config was not as strict
as the one used elsewhere in angular/angular and google3.
PR Close#29843
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
Queries can technically be also accessed within component templates
e.g.
```html
<my-comp [binding]="myQuery"></my-comp>
```
In that case the query with the property "myQuery" is accessed
statically and needs to be marked with `static: true`. There are
other edge cases that need to be handled as the template property
read doesn't necessarily resolve to the actual query property.
For example:
```html
<foo #myQuery></foo>
<my-comp [binding]="myQuery"></my-comp>
```
In this scenario the binding doesn't refer to the actual query
because the template reference variable takes precedence. The
query doesn't need to be marked with "static: true" this time.
This commit ensures that the `static-query` migration schematic
now handles this cases properly. Also template property reads
that access queries from within a `<ng-template>` are ignored
as these can't access the query before the view has been initialized.
Resolves FW-1216
PR Close#29713
- Removes `@publicApi` annotation from ivy instructions
- Adds new `@codeGenApi` annotation to ivy instructions
- Updates ts_api_guardian to support the new annotation properly
PR Close#29820
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
- Adds the instructions
- Adds tests for all instructions
- Adds TODO to remove all tests when we are able to test this with TestBed after the compiler is updated
PR Close#29576
- moves the property instruction to its own file
- moves shared functions that should not be public to the existing `shared.ts` file.
- adds the export of `property.ts` to `all.ts`
PR Close#29576
While investigating styling performance regressions, it was discovered
that a single `fn(...args)` operation was causing a performance hit
because the generated es5 `__spread` operation uses `[].concat` and
reads from the `arguments` values (which are not very efficient). This
patch changes that around to use `fn.apply` instead.
PR Close#29795
Currently the `static-query` and `template-var-assignment` schematic only runs
for `8.0.0` which does not include any betas or release candidates. We want to
run the schematic in the beta's and RC in order to get early feedback about the
schematics. Enabling it promptly with V8 stable release can result in accidental
breakages that we would like to fix/identify before.
PR Close#29735
Queries can not only be accessed within derived classes, but also in
the super class through abstract methods. e.g.
```
abstract class BaseClass {
abstract getEmbeddedForm(): NgForm {}
ngOnInit() {
this.getEmbeddedForm().doSomething();
}
}
class Subclass extends BaseClass {
@ViewChild(NgForm) form: NgForm;
getEmbeddedForm() { return this.form; }
}
```
Same applies for abstract properties which are implemented in the base class
through accessors. This case is also now handled by the schematic.
Resolves FW-1213
PR Close#29688
Currently the static-query schematic is not able to properly handle
call expressions that pass function declarations that access a given
query. e.g.
```ts
ngOnInit() {
this._callFunction(() => this.myQuery.doSomething());
}
_callFunction(cb: any) { cb(); }
```
In that case the passed function is executed synchronously in
the "ngOnInit" lifecycle and therefore the query needs to be
detected as "static".
We can fix this by keeping track of the current function context
and using it to resolve identifiers to the passed arguments.
PR Close#29663
Currently we only check getters for property access expressions. This is wrong
because property access expressions do not always cause the "getter" to be
triggered. e.g.
```ts
set a() {...}
get a() {...}
ngOnInit() {
this.a = true;
}
```
In that case the schematic currently incorrectly checks the "getter", while this is a binary
expression and the property access is used as left-side of the binary expression. In that
case we need to check the setter declaration of the property and not the "getter". In order
to fix this, we need to also check `ts.BinaryExpression` nodes and check getters/setters
based on the used operator token. There are three types of binary expressions:
1) Value assignment (using `=`). In that case only the setter is triggered.
2) Compound assignment (e.g. using `+=`). In that case `getter` and `setter` are triggered.
3) Comparison (e.g. using `===`). In that case only the getter is triggered.
PR Close#29663
Fixes the creation mode block not being run on components which have been detached from change detection.
This PR resolves FW-1217.
Fixes#29645.
PR Close#29741
Fixes Ivy not throwing an error if it runs into an invalid property binding on a container node (e.g. `<div *ngFor="let row of rows">` instead of `<div *ngFor="let row if rows">`).
This PR resolves FW-1219.
PR Close#29691
In order to optimize performance for styling-related operations in
Angular, debug counters need to be introduced. This patch adds various
counters to ngDevMode which are fired each time a styling-related
binding is updated.
PR Close#29579
Previously we always walked the whole folder tree looking for
entry-points before we tested whether a target package had been
processed already. This could take >10secs!
This commit does a quick check of the target package before doing
the full walk which brings down the execution time for ngcc in this
case dramatically.
```
$ time ./node_modules/.bin/ivy-ngcc -t @angular/common/http/testing
Compiling @angular/core : fesm2015 as esm2015
Compiling @angular/core : fesm5 as esm5
Compiling @angular/core : esm2015 as esm2015
Compiling @angular/core : esm5 as esm5
Compiling @angular/common/http : fesm2015 as esm2015
Compiling @angular/common/http : fesm5 as esm5
Compiling @angular/common/http : esm2015 as esm2015
Compiling @angular/common/http : esm5 as esm5
Compiling @angular/common/http/testing : fesm2015 as esm2015
Compiling @angular/common/http/testing : fesm5 as esm5
Compiling @angular/common/http/testing : esm2015 as esm2015
Compiling @angular/common/http/testing : esm5 as esm5
real 0m19.766s
user 0m28.533s
sys 0m2.262s
```
```
$ time ./node_modules/.bin/ivy-ngcc -t @angular/common/http/testing
The target entry-point has already been processed
real 0m0.666s
user 0m0.605s
sys 0m0.113s
```
PR Close#29740
The `template-var-assignment` schematic currently complains if someone
assigns a value to a template variable. This will no longer work with Ivy, but
it should be totally fine to update a property of the template variable if it refers
to an object. This commit adds a test that ensures that we don't incorrectly report
any failure for such property writes in bound events.
PR Close#29708
Improves the failure messages for the `template-var-assignment` schematic. After manual
testing of the schematic it's not quite clear for developers what the failure message means
without any context. The schematic now also references a short markdown file mentioning
what needs to be changed, but eventually this document needs to be expanded with more
information and context of the reasoning behind this change within Ivy.
PR Close#29708
Previously, if a matching rootDir ended with a slash then the path
returned from `logicalPathOfFile()` would not start with a slash,
which is inconsistent.
PR Close#29627
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.
Jira Issue: FW-1132
PR Close#29602
Prior to this change, any provider that was independently resolved using
its InjectableDef would not be considered when destroying the module it
was requested from. This commit provides a fix for this issue by storing
the resolved provider in the module's list of provider definitions.
Fixes#28927
PR Close#28943
Adds an overload to TestBed.get making parameters strongly typed and
deprecated previous signature that accepted types `any`. The function
still returns `any` to prevent build breakages, but eventually stronger
type checks will be added so a future Angular version will break builds
due to additional type checks.
See previous breaking change - #13785
Issue #26491
PR Close#29290
While running `ng update @angular/core --next`, the following error would be displayed:
```
Cannot find module '....\node_modules\@angular\core\schematics\migrations\template-var-assignment\index'
```
This happened because the Schematics migration was referenced, but not included.
This commit fixes that bug by including the migration in the Bazel npm package dependencies.
PR Close#29705
Simply adds a `debug` property to the array of create opcodes while inside
`readCreateOpCodes` in i18n. This `debug` property has a property called `operations`
that is a human-readable list of operations that will be performed, as derived
from the op codes themselves, and the view it's acting upon.
PR Close#29348
This new interface will match classes whether they are abstract or
concrete. Casting as `AbstractType<MyConcrete>` will return a type that
isn't newable. This type will be used to match abstract classes in the
`get()` functions of `Injector` and `TestBed`.
Type isn't used yet so this isn't a breaking change.
Issue #26491
PR Close#29295
The defineInjector function specifies its providers and imports array to
be optional, so if no providers/imports are present these keys may be
omitted. This commit updates the compiler to only generate the keys when
necessary.
PR Close#29598
Prior to this change, a module's imports and exports would be used verbatim
as an injectors' imports. This is detrimental for tree-shaking, as a
module's exports could reference declarations that would then prevent such
declarations from being eligible for tree-shaking.
Since an injector actually only needs NgModule references as its imports,
we may safely filter out any declarations from the list of module exports.
This makes them eligible for tree-shaking once again.
PR Close#29598
Prior to this change, all module metadata would be included in the
`defineNgModule` call that is set as the `ngModuleDef` field of module
types. Part of the metadata is scope information like declarations,
imports and exports that is used for computing the transitive module
scope in JIT environments, preventing those references from being
tree-shaken for production builds.
This change moves the metadata for scope computations to a pure function
call that patches the scope references onto the module type. Because the
function is marked pure, it may be tree-shaken out during production builds
such that references to declarations and exports are dropped, which in turn
allows for tree-shaken any declaration that is not otherwise referenced.
Fixes#28077, FW-1035
PR Close#29598
With the new API, where you can choose to only process the first
matching format, it is possible to process an entry-point multiple
times, if you pass in a different format each time.
Previously, ngcc would always try to process the typings files for
the entry-point along with processing the first format of the current
execution of ngcc. But this meant that it would be trying to process
the typings a second time.
Now we only process the typings if they have not already been
processed as part of processing another format in another
even if it was in a different execution of ngcc.
PR Close#29657
Introduces a new update schematic called "template-var-assignment"
that is responsible for analyzing template files in order to warn
developers if template variables are assigned to values.
The schematic also comes with a driver for `tslint` so that the
check can be used wtihin Google.
PR Close#29608
- moves all publicly exported instructions to their own files
- refactors namespace instructions to set state in `state.ts`
- no longer exports * from `instructions.ts`.
- `instructions.ts` renamed to `shared.ts` (old `shared.ts` contents folded in to `instructions.ts`)
- updates `all.ts` to re-export from public instruction files.
PR Close#29646
Currently our plan is to skip the publish, docgen, and update steps for this package.
During RC, we'll determine if the breaking change is too difficult for users, in which case we might restore the package for another major.
PR Close#29550
In ES2015, classes could have been emitted as a variable declaration
initialized with a class expression. In certain situations, an intermediary
variable suffixed with `_1` is present such that the variable
declaration's initializer becomes a binary expression with its rhs being
the class expression, and its lhs being the identifier of the intermediate
variable. This structure was not recognized, resulting in such classes not
being considered as a class in `Esm2015ReflectionHost`.
As a consequence, the analysis of functions/methods that return a
`ModuleWithProviders` object did not take the methods of such classes into
account.
Another edge-case with such intermediate variable was that static
properties would not be considered as class members. A testcase was added
to prevent regressions.
Fixes#29078
PR Close#29119
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29466
Currently there is no support in ngtsc for imports of the form:
```
import * as core from `@angular/core`
export function forRoot(): core.ModuleWithProviders;
```
This commit modifies the `ReflectionHost.getImportOfIdentifier(id)`
method, so that it supports this kind of return type.
PR Close#27675
This commit introduces a mechanism for incremental compilation to the ngtsc
compiler.
Previously, incremental information was used in the construction of the
ts.Program for subsequent compilations, but was not used in ngtsc itself.
This commit adds an IncrementalState class, which tracks state between ngtsc
compilations. Currently, this supports skipping the TypeScript emit step
when the compiler can prove the contents of emit have not changed.
This is implemented for @Injectables as well as for files which don't
contain any Angular decorated types. These are the only files which can be
proven to be safe today.
See ngtsc/incremental/README.md for more details.
PR Close#29380
This commit adds support for compiling the same program repeatedly in a way
that's similar to how incremental builds work in a tool such as the CLI.
* support is added to the compiler entrypoint for reuse of the Program
object between compilations. This is the basis of the compiler's
incremental compilation model.
* support is added to wrap the CompilerHost the compiler creates and cache
ts.SourceFiles in between compilations.
* support is added to track when files are emitted, for assertion purposes.
* an 'exclude' section is added to the base tsconfig to prevent .d.ts
outputs from the first compilation from becoming inputs to any subsequent
compilations.
PR Close#29380
This commit adds a `tracePerformance` option for tsconfig.json. When
specified, it causes a JSON file with timing information from the ngtsc
compiler to be emitted at the specified path.
This tracing system is used to instrument the analysis/emit phases of
compilation, and will be useful in debugging future integration work with
@angular/cli.
See ngtsc/perf/README.md for more details.
PR Close#29380
Currently, ngtsc decides to use remote scoping if the compilation of a
component may create a cyclic import. This happens if there are two
components in a scope (say, A and B) and A directly uses B. During
compilation of B ngtsc will then note that if B were to use A, a cycle would
be generated, and so it will opt to use remote scoping for B.
ngtsc already uses the R3TargetBinder to correctly track the imports that
are actually required, for future cycle tracking. This commit expands that
usage to not trigger remote scoping unless B actually does consume A in its
template.
PR Close#29404
Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
Sometimes (especially on mobile browsers on SauceLabs) the script may
fail to load due to a temporary issue with the internet connection. To
avoid flakes on CI when this happens, we retry the download after some
delay.
Related to #28578.
PR Close#29603
Queries can also be statically accessed within getters. e.g.
```ts
ngOnInit() {
this.myQueryGetter.doSomething();
}
```
In that case we need to check if the `myQueryGetter` definition accesses
a query statically. As we need to use the type checker for every property acess
within lifecylce hooks, the schematic might become slower than before, but considering
that this is a one-time execution, it is totally fine using the type-checker extensively.
PR Close#29609
When an anchor scroll happens, we run document.querySelector. This value can be taken directly from the user. Therefore it's possible to throw an error on scrolling, which can cause the application to fail.
This PR escapes the selector before using it.
Related to #28193
[Internal discussion](https://groups.google.com/a/google.com/forum/#!topic/angular-users/d82GHfmRKLc)
PR Close#29577
Previously we were using absolute paths, but since at rendering time
we do not know exactly where the file will be written it is more correct
to change to using relative paths. This is actually better all round
since it allows the folders to be portable to different machines, etc.
PR Close#29556
We have already removed this concept from the public API. This just cleans it out altogether.
The `targetPath` was an alternative output path to the original `basePath`.
This is not really a very useful concept, since the actual target path
of each output file is more complex and not consistently relative to the `basePath`.
PR Close#29556
- Adds `property` instruction
- Does _NOT_ add compiler changes to accommodate `property` instruction, that will be a follow up PR.
- Updates `select` instruction to set the selected index in state.
- Adds dev mode assertions around the selected index state.
Related #29527
PR Close#29513
When an @NgModule is imported more than once in the testing module (for
example it appears in the imports of more than one module, or if it's
literally listed multiple times), then TestBed had a bug where the
providers for the module would be overridden many times.
This alone was problematic but would not break tests. However, the original
value of the providers field of the ngInjectorDef was saved each time, and
restored in the same order. Thus, if the provider array was [X], and
overrides were applied twice, then the override array would become
[X, X'] and then [X, X', X, X']. However, on the second override the state
[X, X'] would be stored as original. The array would then be restored to
[X] and then [X, X'].
Each test, therefore, would continue to double the size of the providers
array for the module, eventually exhausting the browser's memory.
This commit adds a Set to track when overrides have been applied to a module
and refrain from applying them more than once.
PR Close#29571
Prior to this change, recompilation of AOT-compiled components in TestBed may fail when template override is requested. That was happening due to the `styleUrls` field defined for a Component, thus switching its state to "requires resolution" (i.e. having external resources) at compile time. This change avoids this issue by storing styles and resetting `styleUrls` field before recompilation. Once compilation is done, saved styles are patched back onto Component def.
PR Close#29555
- Adds `property` instruction
- Does _NOT_ add compiler changes to accommodate `property` instruction, that will be a follow up PR.
- Updates `select` instruction to set the selected index in state.
- Adds dev mode assertions around the selected index state.
Related #29527
PR Close#29513
Currently when building an Angular project with `ngtsc`
and `flatModuleOutFile` enabled, the Ngtsc build will fail
if there are multiple source files as root file names.
Ngtsc and NGC currently determine the entry-point for multiple
root file names by looking for files ending with `/index.ts`.
This functionality is technically deprecated, but still supported
and currently breaks on Windows as the root file names are not
guaranteed to be normalized POSIX-like paths.
In order to make this logic more reliable in the future, this commit
also switches the shim generators and entry-point logic to the branded
path types. This ensures that we don't break this in the future.
PR Close#29453
forEach is slower as compared to a regular loop but more importantly
this change removes an anonymous function and thus makes stack traces
shorter and easier to read (important for perf analysis).
PR Close#29543
This commit removes code duplication where we had 2 versions of a
`flatten` utility. Moreover this change results in queries using
a non-recursive version of `flatten` which should result in a better
performance of query refresh operations.
PR Close#29547
clarify scrollPositionRestoration enabled to fully describe the functionality it provides. refactor app module example to compile and remove dependency on unnecessary framework. Remove component example due to bug on reload.
PR Close#29260
Prior to this change, Ivy version of TestBed was not designed to support the logic to avoid recompilations - most of the Components/Directives/Pipes were recompiled for each test, even if there were no overrides defined for a given Type. Additional checks to avoid recompilation were introduced in one of the previous commits (0244a2433e), but there were still some corner cases that required attention. In order to support the necessary logic better, Ivy TestBed was rewritten/refactored. Main results of this rewrite are:
* no recompilation for Components/Directives/Pipes without overrides
* the logic to restore state between tests (isolate tests) was improved
* transitive scopes calculation no longer performs recompilation (it works with compiled defs)
As a result of these changes we see reduction in memory consumption (3.5-4x improvement) and pefromance increase (4-4.5x improvement).
PR Close#29483
* fixes prodmode issue in integration/bazel
BREAKING CHANGE:
@bazel/typescript is now a peerDependency of @angular/bazel so user's of @angular/bazel must add @bazel/typescript to their package.json
PR Close#29508
The API changes are due to enabling strict checks in TypeScript (via `strict: true`).
The payload size changes in `polyfills.js` are due to more browser APIs being patched in recent versions (e.g. `fetch`, `customElement v1`).
PR Close#28219
In View Engine, we used to generate empty QueryLists for content queries on root
components (though we did not actually support populating these lists). We need
to keep this behavior in Ivy for backwards compatibility. Otherwise, components
that are sometimes used as root will fail if they are relying on content query
results to always be defined.
PR Close#29514
With 093dc915ae9ad92a3baa602eb7cb7862ca4b6734, Firefox has been updated
to the latest available version within Saucelabs. Firefox added shadow DOM support
in Firefox 63 and therefore the shadow dom test in `platform-browser` now runs as well.
This test currently fails because Firefox does not support computed style property
shorthands. In order to make this test work on Firefox now, we just switch from `border`
to `background` (because of the overhead when comparing each `top`, `bottom`, `left`, `right`-border properties)
PR Close#29518
In some cases ivy expects projectable nodes to be passed in a different order
to ViewEngine. Specifically, ivy expects the catch-all ("*") to be at index
0, whereas ViewEngine expects it to be at its position at which it was parsed
in the template.
This commit adds one test that breaks under ivy and others that just describe
more accurately what happens in corner cases.
PR Close#27791
ivy's bindingUpdated instruction is using the assertNotEqual check to make
sure that NO_CHANGE value (of type Object) is not passed as a value to be
dirty-checked. In practice it means that any value passed as a binding
value would be compared to the NO_CHANGE object.
It turns out that the assertNotEqual is using == and given
that binding values are of different type and we always compare it to the
NO_CHANGE object we were doing lots of type coercion. It resulted in calls
to expensive types conversions and calls to Object.toString().
A profiler reported ~15% of the self time spent in the assertNotEqual
but it turns out that removing type coercion speeds up Material Chips with
input scenario much more (~40ms down to ~20ms).
This PR introduces new assert method `assertNotSame` that uses strict equality
check. The new assertion is used in binding instructions to compare to
NO_CHANGE object reference.
PR Close#29470
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.
PR Close#29392
Queries can be also used statically within the "ngDoCheck" and "ngOnChanges" lifecylce hook.
In order to properly detect all queries, we need to also respect these lifecycle hooks.
Resolves FW-1192
PR Close#29492
In ReflectionCapabilities, when checking for own parameters of a type, inherit the types properly for classes that do have a constructor, but the constructor takes no declared parameters and just delegates to super(...arguments). This removes the need to declare trivial constructors in such classes to make them work properly in JIT mode. Without this, DI fails and injectables are undefined.
PR Close#29232
This fix corrects a bug where we were passing a binding _value_
in place of an expected binding index. This reulted in the binding
value being compared to an array length and buggy type coercion.
Fixing this bug speeds up test scenario by ~10-15%.
PR Close#29476
Previously, several `ngtsc` and `ngcc` APIs dealing with class
declaration nodes used inconsistent types. For example, some methods of
the `DecoratorHandler` interface expected a `ts.Declaration` argument,
but actual `DecoratorHandler` implementations specified a stricter
`ts.ClassDeclaration` type.
As a result, the stricter methods would operate under the incorrect
assumption that their arguments were of type `ts.ClassDeclaration`,
while the actual arguments might be of different types (e.g. `ngcc`
would call them with `ts.FunctionDeclaration` or
`ts.VariableDeclaration` arguments, when compiling ES5 code).
Additionally, since we need those class declarations to be referenced in
other parts of the program, `ngtsc`/`ngcc` had to either repeatedly
check for `ts.isIdentifier(node.name)` or assume there was a `name`
identifier and use `node.name!`. While this assumption happens to be
true in the current implementation, working around type-checking is
error-prone (e.g. the assumption might stop being true in the future).
This commit fixes this by introducing a new type to be used for such
class declarations (`ts.Declaration & {name: ts.Identifier}`) and using
it consistently throughput the code.
PR Close#29209
Previously, it was not possible to have multiple apps (using
`@angular/service-worker`) on different subpaths of the same domain,
because each SW would overwrite the caches of the others (even though
their scope was different).
This commit fixes it by ensuring that the cache names created by the SW
are different for each scope.
Fixes#21388
PR Close#27080
The tests will not be run anyway, so the artifacts are never used and
there might be errors if creating the testing artifacts relies on APIs
that are not available in that environment (e.g. `URL`).
PR Close#27080
Previously, only directives and services with generic type parameters
would emit `any` as generic type when emitting Ivy metadata into .d.ts
files. Pipes can also have generic type parameters but did not emit
`any` for all type parameters, resulting in the omission of those
parameters which causes compilation errors.
This commit adds support for pipes with generic type arguments and emits
`any` as generic type in the Ivy metadata.
Fixes#29400
PR Close#29403
This commit adds a `NewEntryPointFileWriter` that will be used in
webpack integration. Instead of overwriting files in-place, this `FileWriter`
will make a copy of the TS program files and write the transformed files
there. It also updates the package.json with new properties that can be
used to access the new entry-point format.
FW-1121
PR Close#29092
If `targetEntryPointPath` is provided to `mainNgcc` then we will now mark all
the `propertiesToConsider` for that entry-point if we determine that
it does not contain code that was compiled by Angular (for instance it has
no `...metadata.json` file).
The commit also renames `__modified_by_ngcc__` to `__processed_by_ivy_ngcc__`, since
there may be entry-points that are marked despite ngcc not actually compiling anything.
PR Close#29092
Now we check the build-marker version for all the formats
rather than just the one we are going to compile.
This way we don't get into the situation where one format was
built with one version of ngcc and another format was built with
another version.
PR Close#29092
Now the public API does not contain internal types, such as `AbsoluteFsPath` and
`EntryPointJsonProperty`. Instead we just accept strings and then guard them in
`mainNgcc` as appropriate.
A new public API function (`hasBeenProcessed`) has been exported to allow programmatic
checking of the build marker when the package.json contents are already known.
PR Close#29092
Previously we always considered all the properties in the package.json
if no `propertiesToConsidere` were provided.
But this results in computing a new set of properties for each entry-point
plus iterating through many of the package.json properties that are
not related to bundle-format paths.
PR Close#29092
Sometimes, in ESM5 code, aliases to exported variables are used internally
to refer to the exported value. This prevented some analysis from being
able to match up a reference to an export to the actual export itself.
For example in the following code:
```
var HttpClientXsrfModule = /** @class */ (function () {
function HttpClientXsrfModule() {
}
HttpClientXsrfModule_1 = HttpClientXsrfModule;
HttpClientXsrfModule.withOptions = function (options) {
if (options === void 0) { options = {}; }
return {
ngModule: HttpClientXsrfModule_1,
providers: [],
};
};
var HttpClientXsrfModule_1;
HttpClientXsrfModule = HttpClientXsrfModule_1 = tslib_1.__decorate([
NgModule({
providers: [],
})
], HttpClientXsrfModule);
return HttpClientXsrfModule;
}());
```
We were not able to tell that the `ngModule: HttpClientXsrfModule_1` property
assignment was actually meant to refer to the `function HttpClientXrsfModule()`
declaration. This caused the `ModuleWithProviders` processing to fail.
This commit ensures that we can compile typings files using the ESM5
format, so we can now update the examples boilerplate tool so that it
does not need to compile the ESM2015 format at all.
PR Close#29092
In ESM5 code, static methods appear as property assignments onto the constructor
function. For example:
```
var MyClass = (function() {
function MyClass () {}
MyClass.staticMethod = function() {};
return MyClass;
})();
```
This commit teaches ngcc how to process these forms when searching
for `ModuleWithProviders` functions that need to be updated in the typings
files.
PR Close#29092
By default ngcc will compile all the format properties specified. With this
change you can configure ngcc so that it will stop compiling an entry-point
after the first property that matches the `propertiesToConsider`.
PR Close#29092
By ensuring that EntryPointBundle contains everything that `Transformer.transform()`
needs to do its work, we can simplify its signature.
PR Close#29092
Now that we are using package.json properties to indicate which
entry-point format to compile, it turns out that we don't really
need to distinguish between flat and non-flat formats, unless we
are compiling `@angular/core`.
PR Close#29092
You can now specify a list of properties in the package.json that
should be considered (in order) to find the path to the format to compile.
The build marker system has been updated to store the markers in
the package.json rather than an additional external file.
Also instead of tracking the underlying bundle format that was compiled,
it now tracks the package.json property.
BREAKING CHANGE:
The `proertiesToConsider` option replaces the previous `formats` option,
which specified the final bundle format, rather than the property in the
package.json.
If you were using this option to compile only specific bundle formats,
you must now modify your usage to pass in the properties in the package.json
that map to the format that you wish to compile.
In the CLI, the `--formats` is no longer available. Instead use the
`--properties` option.
FW-1120
PR Close#29092
Kristiyan Kostadinov
Andrew Kushnir
JoostK
Paul Gschwendtner
Alex Rickabaugh
Trevor Karjanis
Ben Lesh
José I. Escudero
Adam Plumer
Kara Erickson
Keen Yee Liau
Trotyl Yu
Olivier Combe
Kevin Newman
Keen Yee Liau
Brandon
Filipe Silva
Alex Eagle
Alan Agius
Greg Magolan
Pawel Kozlowski
Yun Peng
Matias Niemelä
Igor Minar
Peter Johan Salomonsen
Bowen Ni
Frederik Prijck
Pete Bacon Darwin
Rado Kirov
Judy Bogart
Carlos Ortiz García
Vani
cexbrayat
Jason Aden
Dave
George Kalpakas
Jon Grunewald
Marc Laval
Kara
Miško Hevery
ijz953
JiaLiPassion
Piotr Tomiak
Bolek Szewczyk
Cameron Steffen
Sheik Althaf