Whenever someone tries to commit (by running `git commit` directly or
indirectly), a `commit-msg` git hook is run to validate the commit
message. If the validation fails, an error message is printed and the
commit is aborted.
Occasionally, people may have written a non-trivial commit message which
could turn out to be invalid (due a small typo for example). In that
case, it is frustrating to "lose" the whole message and have to write it
all over again (from memory). This is frustrating and has happened to me
enough times to finally seek a solution.
Fortunately, it turns out that git stores the last commit message in
`.git/COMMIT_EDITMSG`, so it is easy to get it back (as long as you know
where to look for it). This commit mentions this info in the validation
error to help people that might not know about it.
(This issue is probably mostly relevant for people using git from the
command-line and not through a UI, but it won't hurt in either case.)
PR Close#32420
This patch introduces a new micro benchmark that performance tests
against map-based style and class bindings in Ivy running together
on the same element.
PR Close#32401
This patch introduces a new micro benchmark that performance tests
against style and class bindings in Ivy running together on the same
element.
PR Close#32401
Extend the vocabulary of the `providedIn` to also include `'platform'` and `'any'`` scope.
```
@Injectable({
providedId: 'platform', // tree shakable injector for platform injector
})
class MyService {...}
```
PR Close#32154
Previously, any diagnostics reported during the compilation of an
entry-point would not be shown to the user, but either be ignored or
cause a hard crash in case of a `FatalDiagnosticError`. This is
unfortunate, as such error instances contain information on which code
was responsible for producing the error, whereas only its error message
would not. Therefore, it was quite hard to determine where the error
originates from.
This commit introduces behavior to deal with error diagnostics in a more
graceful way. Such diagnostics will still cause the compilation to fail,
however the error message now contains formatted diagnostics.
Closes#31977
Resolves FW-1374
PR Close#31996
The Angular compiler has an emulation system for various kinds of
filesystems and runs its testcases for all those filesystems. This
allows to verify that the compiler behaves correctly in all of the
supported platforms, without needing to run the tests on the actual
platforms.
Previously, the emulated Windows mode would normalize rooted paths to
always include a drive letter, whereas the native mode did not perform
this normalization. The consequence of this discrepancy was that running
the tests in native Windows was behaving differently compared to how
emulated Windows mode behaves, potentially resulting in test failures
in native Windows that would succeed for emulated Windows.
This commit adds logic to ensure that paths are normalized equally for
emulated Windows and native Windows mode, therefore resolving the
discrepancy.
PR Close#31996
Adds a new test to the `ng_update_migrations` that ensures
that the `missing-injectable` migration works properly in a
real CLI project. Additionally this ensures that the
`missing-injectable` and `undecorated-classes-with-di` migrations
play nicely together.
PR Close#32349
Creates anew integratin test for `ng-update` migrations. The
integration test uses an Angular CLI project that will be updated
using the latest package output symlinked from then `./dist/packages-dist`.
This allows us to ensure that migrations work in real CLI projects.
Another big benefit is that the Angular version is updated to the
latest. This is something we couldn't replicate in unit tests but
is extremely important. It's important because compilation could
break with newer Angular versions (note that migrations are always
executed after the new angular version has been installed).
PR Close#32349
Initially the `missing-injectable` migration was only being used
in google3. Wiring the migration up in the CLI migrations was
planned to be done in a follow-up.
PR Close#32349
The `bazel-watcher` (also known as `ibazel`) currently does not work on windows. This
is because all versions before `v0.10.0` did not have official windows support. This
commit updates `ibazel` to the latest version which also comes with windows support.
PR Close#32390
This fixes the error in g3:
```
error TS100: Cannot determine the module for class LargeTableComponent in
modules/benchmarks/src/largetable/render3/table.ts!
Add LargeTableComponent to the NgModule to fix it.
```
PR Close#32404
If a project has nested projects that contain node_modules folders
that get processed by ngcc, it can be confusing when the ngcc
version changes since the error message is very generic:
```
The ngcc compiler has changed since the last ngcc build.
Please completely remove `node_modules` and try again.
```
This commit augments the error message with the path of
the entry-point that failed so that it is more obvious which
node_modules folder to remove.
BREAKING CHANGE:
This commit removes the public export of `hasBeenProcessed()`.
This was exported to be availble to the CLI integration but was never
used. The change to the function signature is a breaking change in itself
so we remove the function altogether to simplify and lower the public
API surface going forward.
PR Close#32396
Temporarily disables saucelabs tests for Chrome Mobile on
android devices. This is because the browsers constantly do not
capture in Karma due to some connectivity issue where the
browsers are not able to load the karma page.
PR Close#32403
This PR modifies the `largetable` render3 (ivy) test so that it works in
g3.
1. `index.ts` must be named `index_aot.ts`
2. Scripts should be loaded via `ts_devserver` and not as an explicit
script tag in the HTML.
PR Close#32275
This PR modifies the tree render3 (ivy) test so that it works in g3.
Namely, the index.ts must be named index_aot.ts and scripts should be
loaded via ts_devserver and not as an explicit script tag in the HTML.
PR Close#32274
Disambiguate the name of the Language Service Host used in constructing
a TypeScript Language Service Host by renaming the `host` property to
`tsLsHost`.
PR Close#32346
TestBed.get is not type safe, fixing it would be a massive breaking
change. The Angular team has proposed replacing it with TestBed.inject
and deprecate TestBed.get.
Deprecation from TestBed.get will come as a separate commit.
Issue #26491Fixes#29905
BREAKING CHANGE: Injector.get now accepts abstract classes to return
type-safe values. Previous implementation returned `any` through the
deprecated implementation.
PR Close#32200
Ivy snapshots no longer contain metadata.json which breaks the detection logic for
Angular Package Format (APF) in npm/yarn install.
This PR adds ANGULAR_PACAKGE as a magic file to denote APF.
See https://github.com/bazelbuild/rules_nodejs/issues/927
PR Close#31900
Move generic test methods to `MockTypescriptHost` so they could be
shared across all tests.
This is in preparation for adding more tests to Hover when new features
get added.
PR Close#32378
Hovering over a selector, the QuickInfo display string is something
like:
```
(component) AppComponent
```
where `component` is the symbol kind.
Prior to this, there was no types to indicate the possible values of a
symbol. This PR creates an enum to represent that.
PR Close#32376
This commit fixes a bug introduced in the recent refactoring whereby
caches become stale when the program changes.
This is because StaticReflector keeps its own caches that are not
clearable. The previous refactoring tried to reuse the same instance,
leading to out-of-sync program state.
Clearing out the *entire* cache is very inefficient. Instead, we could
just invalidate the symbols in the files that have changed. This
requires changes to the API of StaticReflector, but put this on hold
until the refactoring of language service for Ivy commences.
PR closes https://github.com/angular/angular/issues/32301
PR Close#32357
Currently the undecorated classes migration decorates base classes if no
explicit constructor is defined on all classes in the inheritance chain.
We only want to decorate base classes which define a constructor that is
inherited. Additionally for best practice, all classes in between the class
that inherits the constructor and the one that defines it are also decorated.
PR Close#32319
The `undecorated-classes-with-di` migration currently creates invalid object literals from parsed
NGC metadata files if there are object literal properties with keys that contain special characters.
e.g. consider a decorated base class with a host binding using `[class.X]`. Currently the migration
parses and converts the metadata to TypeScript code but incorrectly uses `[class.X]` unquoted as
identifier.
PR Close#32319
Apparently the names of the bazel test targets in the schematics are
incorrect. This commit updates the target names to match their bazel
package name.
PR Close#32318
ec4381dd40 enabled Ivy by default. This is
problematic as migrations like `undecorated-classes-with-di` depend on the
`AngularCompilerProgram` (NGC) in order to perform the migration from
version 8 to version 9. In order to ensure that the migration always runs
with NGC (and doesn't get the `NgtscProgram`), we need to explicitly disable
ivy when creating the `@angular/compiler-cli` program for the migration.
PR Close#32318
Joey Perrott
Alan Agius
George Kalpakas
Santosh Yadav
Matias Niemelä
Misko Hevery
JoostK
Issei Horie
Paul Gschwendtner
Keen Yee Liau
Pete Bacon Darwin
Kara Erickson
Pawel Kozlowski
ayazhafiz
Carlos Ortiz García
Keen Yee Liau