The keySpan in bound attributes provides more fine-grained location information and can be used
to disambiguate multiple bound attributes in a single microsyntax binding. Previously,
this case could not distinguish between the two different attributes because
the sourceSpans were identical and valueSpans would not match if the cursor
was located in a key.
PR Close#38955
Previously, the `backoff()` example did not work as intended. More
specifically, the `range(1, maxTries)` observable would complete
immediately after emitting the `maxTries`th value, causing the overall
observable to also complete. As a result, it would only make
`maxTries - 1` attempts to recover from an error. More importantly, the
outer observable would complete successfully instead of erroring.
This commit fixes the `backoff()` operator by ensuring it makes exactly
`maxTries` attempts to recover and it propagates the actual error to the
outer observable.
The test for this change is added in the next commit.
PR Close#38896
Close#38334.
zone.js provides a flag DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION to let zone.js
throw the original error instead of wrap it when uncaught promise rejection found.
But the rejection value could be anything includes primitive value such as number.
In that case, we should not attach any additional properties to the value.
PR Close#38476
In Ivy, template type-checking has 3 modes: basic, full, and strict. The
primary difference between basic and full modes is that basic mode only
checks the top-level template, whereas full mode descends into nested
templates (embedded views like ngIfs and ngFors). Ivy applies this approach
to all of its template type-checking, including the DOM schema checks which
validate whether an element is a valid component/directive or not.
View Engine has both the basic and the full mode, with the same distinction.
However in View Engine, DOM schema checks happen for the full template even
in the basic mode.
Ivy's behavior here is technically a "fix" as it does not make sense for
some checks to apply to the full template and others only to the top-level
view. However, since g3 relies exclusively on the basic mode of checking and
developers there are used to DOM checks applying throughout their template,
this commit re-enables the nested schema checks even in basic mode only in
g3. This is done by enabling the checks only when Closure Compiler
annotations are requested.
Outside of g3, it's recommended that applications use at least the full mode
of checking (controlled by the `fullTemplateTypeCheck` flag), and ideally
the strict mode (`strictTemplates`).
PR Close#38943
The default value for `relativeLinkResolution` is changing from 'legacy' to 'corrected'.
This migration updates `RouterModule` configurations that use the default value to
now specifically use 'legacy' to prevent breakages when updating.
PR Close#38698
Though we currently have the knowledge of where the `key` for an
attribute binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#38898
There is an inconsistency in overrideProvider behaviour. Testing documentation says
(https://angular.io/guide/testing-components-basics#createcomponent) that all override...
methods throw error if TestBed is already instantiated. However overrideProvider doesn't throw any error, but (same as
other override... methods) doesn't replace providers if TestBed is instantiated. Add TestBed instantiation check to
overrideProvider method to make it consistent.
BREAKING CHANGE:
If you call `TestBed.overrideProvider` after TestBed initialization, provider overrides are not applied. This
behavior is consistent with other override methods (such as `TestBed.overrideDirective`, etc) but they
throw an error to indicate that, when the check was missing in the `TestBed.overrideProvider` function.
Now calling `TestBed.overrideProvider` after TestBed initialization also triggers an
error, thus there is a chance that some tests (where `TestBed.overrideProvider` is
called after TestBed initialization) will start to fail and require updates to move `TestBed.overrideProvider` calls
before TestBed initialization is completed.
Issue mentioned here: https://github.com/angular/angular/issues/13460#issuecomment-636005966
Documentation: https://angular.io/guide/testing-components-basics#createcomponent
PR Close#38717
This commit introduces a new option for the service worker, called
`navigationRequestStrategy`, which adds the possibility to force the service worker
to always create a network request for navigation requests.
This enables the server redirects while retaining the offline behavior.
Fixes#38194
PR Close#38565
This commit refactors the `ExpressionTranslatorVisitor` so that it
is not tied directly to the TypeScript AST. Instead it uses generic
`TExpression` and `TStatement` types that are then converted
to concrete types by the `TypeScriptAstFactory`.
This paves the way for a `BabelAstFactory` that can be used to
generate Babel AST nodes instead of TypeScript, which will be
part of the new linker tool.
PR Close#38775
Previously each identifier was being imported individually, which made for a
very long import statement, but also obscurred, in the code, which identifiers
came from the compiler.
PR Close#38775
This file contains a number of classes making it long and hard to work with.
This commit splits the `ImportManager`, `Context` and `TypeTranslatorVisitor`
classes, along with associated functions and types into their own files.
PR Close#38775
When the target of the compiler is ES2015 or newer then we should
be generating `let` and `const` variable declarations rather than `var`.
PR Close#38775
Using an interface makes the code cleaner and more readable.
This change also adds the `range` property to the type to be used
for source-mapping.
PR Close#38775
The cast to `ts.Identifier` was a hack that "just happened to work".
The new approach is more robust and doesn't have to undermine
the type checker.
PR Close#38775
Let's say we have a code like
```html
<div<span>123</span>
```
Currently this gets parsed into a tree with the element tag `div<span`.
This has at least two downsides:
- An incorrect diagnostic that `</span>` doesn't close an element is
emitted.
- A consumer of the parse tree using it for editor services is unable to
provide correct completions for the opening `<span>` tag.
This patch attempts to fix both issues by instead parsing the code into
the same tree that would be parsed for `<div></div><span>123</span>`.
In particular, we do this by optimistically scanning an open tag as
usual, but if we do not notice a terminating '>', we mark the tag as
"incomplete". A parser then emits an error for the incomplete tag and
adds a synthetic (recovered) element node to the tree with the
incomplete open tag's name.
What's the downside of this? For one, a breaking change.
<ol>
<li>
The first breaking change is that `<` symbols that are ambiguously text
or opening tags will be parsed as opening tags instead of text in
element bodies. Take the code
```html
<p>a<b</p>
```
Clearly we cannot have the best of both worlds, and this patch chooses
to swap the parsing strategy to support the new feature. Of course, `<`
can still be inserted as text via the `<` entity.
</li>
</ol>
Part of #38596
PR Close#38681
This commit re-enables some tests that were temporarily disabled on Windows,
as they failed on native Windows CI. The Windows filesystem emulation has
been corrected in an earlier commit, such that the original failure would
now also occur during emulation on Linux CI.
PR Close#37782
In native windows, the drive letter is a capital letter, while our Windows
filesystem emulation would use lowercase drive letters. This difference may
introduce tests to behave differently in native Windows versus emulated
Windows, potentially causing unexpected CI failures on Windows CI after a PR
has been merged.
Resolves FW-2267
PR Close#37782
NG_VALUE_ACCESSOR is a multi injection token, users can and
should expect more than one ControlValueAccessor to be
available (and this is how it is used in @angular/forms).
This is now reflected in the definition of the injection token
by typing it as an array of ControlValueAccessor. The motivating
reason is that using the programmatic Injector api will now
type Injector#get correspondingly.
fixes#29351
BREAKING CHANGES
NG_VALUE_ACCESSOR is now typed as a readonly array rather than
a mutable scalar. It is used as a multi injection token and as
such it should always be expected that more than one accessor
may be returned.
PR Close#29723
In bootstrapping.md the default AppModule has some extra imports which are not generated
by default in ng new removed those extra imports and add them at appropriate place.
PR Close#38549
The logic for computing identifiers, specifically for bound attributes
can be simplified by using the value span of the binding rather than the
source span.
PR Close#38899
This commit removes the scrollbar styles so that the default
styles in the browser render. This widens the webkit scroll bar.
This makes it easier to grab the scrollbar using assistive
technology and devices, and provides a wider target for
those who have dexterity issues. By removing these styles,
We will no longer have to maintain custom scrollbars specific to WebKit
and they will be accessible by default.
PR Close#38852
The current tests print out the span numbers, which are really difficult to verify
since it requires manually going to the template string and looking at what
characters appear within those indexes. The better humanization would be
to use the toString method of the spans, which prints the span text itself
PR Close#38902
Changed several period into colons to be consistent throughout the doc.
Changed "If don't add the interface..." to "If _you_ don't add the interface..."
PR Close#38900
This commit updates ngbot config to avoid requesting google3 presubmit for the changes in
the `packages/zone.js/dist` folder (which is not synced into google3).
PR Close#38901
Currently, when we call jsonp method without importing HttpClientJsonpModule, an error message appears saying
'Attempted to construct Jsonp request without JsonpClientModule installed.' instance of 'Attempted to
construct Jsonp request without HttpClientJsonpModule installed.'
PR Close#38756
This commit adds a logic to ouput the number of new and fixed cycles after running circular
dependency checker. This information is useful to better understand an impact of changes in case
the number of new/fixed cycles is relatively big.
PR Close#38805
This commit updates several import statements in the core package to decrease the number of
cycles detected by the dependency checker tool.
PR Close#38805
Close#38795
in the XMLHttpRequest patch, when get `readystatechange` event, zone.js try to
invoke `load` event listener first, then call `invokeTask` to finish the
`XMLHttpRequest::send` macroTask, but if the request failed because the
server can not be reached, the `load` event listener will not be invoked,
so the `invokeTask` of the `XMLHttpRequest::send` will not be triggered either,
so we will have a non finished macroTask there which will make the Zone
not stable, also memory leak.
So in this PR, if the `XMLHttpRequest.status = 0` when we get the `readystatechange`
event, that means something wents wrong before we reached the server, we need to
invoke the task to finish the macroTask.
PR Close#38836
During the merge process, all validations have already been completed so git commit
hooks can be safely skipped. This additionally, prevents errors from occuring which
would be caused the commit hooks executing, such as when yarn updates and then yarn
commands are unable to run within the same process.
PR Close#38888
In #38666 we changed how ngcc deals with type expressions, where it
would now always emit the original type expression into the generated
code as a "local" type value reference instead of synthesizing new
imports using an "imported" type value reference. This was done as a fix
to properly deal with renamed symbols, however it turns out that the
compiler has special handling for certain imported symbols, e.g.
`ChangeDetectorRef` from `@angular/core`. The "local" type value
reference prevented this special logic from being hit, resulting in
incorrect compilation of pipe factories.
This commit fixes the issue by manually inspecting the import of the
type expression, in order to return an "imported" type value reference.
By manually inspecting the import we continue to handle renamed symbols.
Fixes#38883
PR Close#38892
Common AST formats such as TS and Babel do not use a separate
node for comments, but instead attach comments to other AST nodes.
Previously this was worked around in TS by creating a `NotEmittedStatement`
AST node to attach the comment to. But Babel does not have this facility,
so it will not be a viable approach for the linker.
This commit refactors the output AST, to remove the `CommentStmt` and
`JSDocCommentStmt` nodes. Instead statements have a collection of
`leadingComments` that are rendered/attached to the final AST nodes
when being translated or printed.
PR Close#38811
Andrew Scott
Sonu Kapoor
JiaLiPassion
Joey Perrott
Alex Rickabaugh
Andrew Scott
Wagner Maciel
Adrian Rutkowski
klemenoslaj
David Shevitz
Pete Bacon Darwin
Ayaz Hafiz
JoostK
Ingo Bürk
Ajit Singh
Prashant Tholia
Kapunahele Wong
Marley Powell
Andrew
Andrew Kushnir
William Koza
Maksymilian Sielicki
Minko Gechev