We can’t determine whether the user actually meant the `back` or
the `forward` using the popstate event (triggered by a browser
back/forward)
so we instead need to store information on the state and compute the
distance the user is traveling withing the browser history.
So by using the `History#go` method,
we can bring the user back to the page where he is supposed to be after
performing the action.
implementation for #13586
PR Close#38884
`onSameUrlNavigation` only affects whether the Angular Router
processes the URL and runs it through the navigation pipeline,
retriggering redirects, guards, and resolvers. The name `reload` is a
little confusing because it does _not_ reload the component. Developers
_also_ need to implement a custom `RouteReuseStrategy` to trigger a
component reload on same URL navigation.
Fixes#21115
PR Close#42275
This commit removes the line to set `currentNavigation` to `null` in the
navigation transitions subscription of the router. This logic is
already handled in the `finalize` stage of the transition pipe and has
been found to cause issues if a new navigation is triggered from a
subscription to the `NavigationEnd` event.
fixes#37460
PR Close#41262
ActivatedRoute.fragment was typed as Observable<string> but could emit
both null and undefined due to incorrect non-null assertion. These
non-null assertions have been removed and fragment has been retyped to
string | null.
BREAKING CHANGE:
Strict null checks will report on fragment potentially being null.
Migration path: add null check.
Fixes#23894, fixes#34197.
PR Close#37336
This commit adds more configurability to the `Router#isActive` method
and `RouterLinkActive#routerLinkActiveOptions`.
It allows tuning individual match options for query params and the url
tree, which were either both partial or both exact matches in the past.
Additionally, it also allows matching against the fragment and matrix
parameters.
fixes#13205
BREAKING CHANGE:
The type of the `RouterLinkActive.routerLinkActiveOptions` input was
expanded to allow more fine-tuned control. Code that previously read
this property may need to be updated to account for the new type.
PR Close#40303
No longer emits to `Router.events` after the router has been destroyed. Also
returns a resolved promise to the navigation methods.
Fixes#40502.
PR Close#40638
Do not warn that navigation was triggered outside Angular zone if the
Router was created outside Angular zone in the first place.
Closes#25837
PR Close#25839
Allow configuration of `relativeTo` in the `routerLink` directive. This
is related to the clearing of auxiliary routes, where you need to use
`relativeTo: route.parent` in order to clear it from the activated
auxiliary component itself. This is because `relativeTo: route` will
consume the segment that we're trying to clear, so there is really no
way to do this with routerLink at the moment.
Related issue: #13523
Related (internal link): https://yaqs.corp.google.com/eng/q/5999443644645376
PR Close#39720
The type of the `navigationExtras` param was accidetally changed to the wrong symbol
in 783a5bd7bb.
These changes revert it to the correct one.
PR Close#39347
Remove preserveQueryParams as it was deprecated for removal in v4, use
queryParamsHandling="preserve" instead.
BREAKING CHANGE: preserveQueryParams has been removed, use
queryParamsHandling="preserve" instead
PR Close#38762
`router.navigateByUrl` and `router.createUrlTree` only use a subset of the `NavigationExtras`. This commit
changes the parameter type to use new interfaces that only specify the properties used by
those function implementations. `NavigationExtras` extends both of those interfaces.
Fixes#18798
BREAKING CHANGE: While the new parameter types allow a variable of type
`NavigationExtras` to be passed in, they will not allow object literals,
as they may only specify known properties. They will also not accept
types that do not have properties in common with the ones in the `Pick`.
To fix this error, only specify properties from the `NavigationExtras` which are
actually used in the respective function calls or use a type assertion
on the object or variable: `as NavigationExtras`.
PR Close#38227
We are changing the default value from 'legacy' to 'corrected' so that new
applications are automatically opted-in to the corrected behavior from #22394.
BREAKING CHANGE: This commit changes the default value of
`relativeLinkResolution` from `'legacy'` to `'default'`. If your
application previously used the default by not specifying a value in the
`ExtraOptions` and uses relative links when navigating from children of
empty path routes, you will need to update your `RouterModule` to
specifically specify `'legacy'` for `relativeLinkResolution`.
See https://angular.io/api/router/ExtraOptions#relativeLinkResolution
for more details.
PR Close#25609
This commit adds `ngDevMode` guard to throw some errors only in dev mode
The ngDevMode flag helps to tree-shake these error messages from production
builds (in dev mode everything will work as it works right now) to decrease
production bundle size.
PR Close#38674
The `@HostListener` functions and lifecycle hooks aren't intended to be public API but
do need to appear in the `.d.ts` files or type checking will break. Adding the
nodoc annotation will correctly hide this function on the docs site.
Again, note that `@internal` cannot be used because the result would be
that the functions then do not appear in the `.d.ts` files. This would
break lifecycle hooks because the class would be seen as not
implementing the interface correctly. This would also break
`HostListener` because the compiled templates would attempt to call the
`onClick` functions, but those would also not appear in the `d.ts` and
would produce errors like "Property 'onClick' does not exist on type 'RouterLinkWithHref'".
PR Close#38448
When navigations coming from Angular router we may have a payload stored in state property. When this
exists, set extras's state to the payload.
PR Close#28176
This commit refactors Router package to move config utils to a separate file for better
organization and to resolve the problem with circular dependency issue.
Resolves#38212.
PR Close#38229
The current method of handling duplicate navigations caused by 'hashchange' and 'popstate' events for the same url change does not correctly handle cancelled navigations. Because `scheduleNavigation` is called in a `setTimeout` in the location change subscription, the duplicate navigations are not flushed at the same time. This means that if the initial navigation hits a guard that schedules a new navigation, the navigation for the duplicate event will not compare to the correct transition (because we inserted another navigation between the duplicates). See https://github.com/angular/angular/issues/16710#issuecomment-646919529Fixes#16710
PR Close#37674
This PR changes the logic for determining when to skip route processing from
using the URL of the last attempted navigation to the actual resulting URL after
that transition.
Because guards may prevent navigation and reset the browser URL, the raw
URL of the previous transition may not match the actual URL of the
browser at the end of the navigation process. For that reason, we need to use
`urlAfterRedirects` instead.
Other notes:
These checks in scheduleNavigation were added in eb2ceff4ba
The test still passes and, more surprisingly, passes if the checks are removed
completely. There have likely been changes to the navigation handling that
handle the test in a different way. That said, it still appears to be important
to keep the checks there in some capacity because it does affect how many
navigation events occur. This addresses an issue that came up in #16710: https://github.com/angular/angular/issues/16710#issuecomment-634869739
This also partially addresses #13586 in fixing history for imperative
navigations that are cancelled by guards.
PR Close#37716
This reverts commit d3a817549b82c3f8c866296af4e952d1af5ac087.
The reason for the revert is the problem reported in g3 which requires additional investigation.
PR Close#37650
This PR changes the logic for determining when to skip route processing from
using the URL of the last attempted navigation to the actual resulting URL after
that transition.
Because guards may prevent navigation and reset the browser URL, the raw
URL of the previous transition may not match the actual URL of the
browser at the end of the navigation process. For that reason, we need to use
`urlAfterRedirects` instead.
Other notes:
These checks in scheduleNavigation were added in eb2ceff4ba
The test still passes and, more surprisingly, passes if the checks are removed
completely. There have likely been changes to the navigation handling that
handle the test in a different way. That said, it still appears to be important
to keep the checks there in some capacity because it does affect how many
navigation events occur. This addresses an issue that came up in #16710: https://github.com/angular/angular/issues/16710#issuecomment-634869739
This also partially addresses #13586 in fixing history for imperative
navigations that are cancelled by guards.
PR Close#37408
This change aligns behavior for resolvers which return EMPTY. Currently EMPTY resolvers have inconsistent behavior:
- One resolver that returns EMPTY => won't navigate and just ends on ResolveStart router event.
- Two resolvers where both return EMPTY => throws "Error: Uncaught (in promise): EmptyError: no elements in sequence"
- Two resolvers where one returns a value and the other one returns EMPTY => Navigates successfully.
With this change any EMPTY resolver will cancel navigation.
BREAKING CHANGE: Any resolver which return EMPTY will cancel navigation.
If you want to allow the navigation to continue, you will need to update the resolvers to emit
some value, (i.e. defaultIfEmpty(...), of(...), etc).
PR Close#24195
PR Close#24621
Resubmit #31168 now that google3 tests can pass. This requires http://cl/272696717 to be patched.
Original description from jasonaden:
Without this change when using UrlTree redirects in urlUpdateStrategy="eager", the URL would get
updated to the target location, then redirected. This resulted in having an additional entry in the
history and thus the back button would be broken (going back would land on the URL causing a new
redirect).
Additionally, there was a bug where the redirect, even without urlUpdateStrategy="eager", could
create a history with too many entries. This was due to kicking off a new navigation within the
navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a
setTimeout, allowing the page being redirected from to be cancelled before starting a new
navigation.
Related to #27148
fix(router): adjust UrlTree redirect to replace URL if in eager update
Fix lint errors
PR Close#32988
There is some confusion around which `NavigationExtras` values are used
by createUrlTree. This specifies that only values that change the URL
are used. This came up during the discussion in #27148.
PR Close#33029
Without this change when using UrlTree redirects in `urlUpdateStrategy="eager"`, the URL would get updated to the target location, then redirected. This resulted in having an additional entry in the `history` and thus the `back` button would be broken (going back would land on the URL causing a new redirect).
Additionally, there was a bug where the redirect, even without `urlUpdateStrategy="eager"`, could create a history with too many entries. This was due to kicking off a new navigation within the navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a `setTimeout`, allowing the page being redirected from to be cancelled before starting a new navigation.
Related to #27148
PR Close#31168
In some cases where multiple navigations happen to the same URL, the router will not process a given URL. In those cases, we fall into logic that resets state for the next navigation. One piece of this resetting is to set the `browserUrlTree` to the most recent `urlAfterRedirects`i.
However, there was bug in this logic because in some cases the `urlAfterRedirects` is a stale value. This happens any time a URL won't be processed, and the previous URL will also not be processed. This creates unpredictable behavior, not the least of which ends up being a broken `back` button.
This PR kicks off new navigations with the current value the router assumes is in the browser. All the logic around how to handle future navigations is based on this value compared to the current transition, so it's important to kick off all new navigations with the current value so in the edge case described above we don't end up with an old value being set into `browserUrlTree`.
Fixes#30340
Related to #30160
PR Close#30344
There was a problem with a combination of the `eager` URL update, browser `back` button, and hybrid applications. Details provided in internal ticket http://b/123667227.
This fix handles the problem by setting `router.browserUrlTree` when all conditions have failed, meaning the browser doesn't do anything with the navigation other than update internal data structures. Without this change, the problem was an old value was stored in `router.broserUrlTree` causing some new navigations to be compared to an old value and breaking future navigations.
PR Close#30160
Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
The value here is unimportant on initialization since it's not looked at until the second navigation. However, sometimes in testing the `Location` service is mocked out, or the Router constructor manually called. Assuming `Location` exists in the constructor leads to test failures in `google3` therefore we initialize to a value that will not cause errors.
PR Close#28376
With #27680, a bug was fixed where multiple redirects using `eager` URL update could cause navigation to fail. However, that fix introduced a problem where with `skipLocationChange` enabled, the URL tree rendered was not properly stored for reference. This specifically caused an issue with named router outlets and subsequent navigations not being recognized.
This PR stores the correct `UrlTree` for reference with later navigations. It fixes the regression introdued with #27680.
Fixes#28200
PR Close#28300
