Commit Graph

2032 Commits

Author SHA1 Message Date
Kara Erickson 9a37e827e2 Revert "feat(forms): formControlName also accepts a number (#30606)" (#32088)
This reverts commit a647298412.

PR Close #32088
2019-08-09 17:29:27 -07:00
George Kalpakas 3df54be9e4 build: ensure fixup commits match an earlier, unmerged commit (#32023)
Previously, `validate-commit-message` would treat `fixup! `-prefixed
commits like this:
- It would strip the `fixup! ` prefix.
- It would validate the rest of the commit message header as any other
  commit.

However, fixup commits are special in that they need to exactly match an
earlier commit message header (sans the `fixup! ` prefix) in order for
git to treat them correctly. Otherwise, they will not be squashed into
the original commits and will be merged as is. Fixup commits can end up
not matching their original commit for several reasons (e.g. accidental
typo, changing the original commit message, etc.).

This commit prevents invalid fixup commits to pass validation by
ensuring that they match an earlier (unmerged) commit (i.e. a commit
between the current HEAD and the BASE commit).

NOTE: This new behavior is currently not activated in the pre-commit git
      hook, that is used to validate commit messages (because the
      preceding, unmerged commits are not available there). It _is_
      activated in `gulp validate-commit-message`, which is run as part
      of the `lint` job on CI and thus will detect invalid commits,
      before their getting merged.

PR Close #32023
2019-08-09 15:12:38 -07:00
George Kalpakas c0d5684078 fix: do not allow `squash! ` commits when merging (#32023)
While `fixup! ` is fine, `squash! ` means that the commit message needs
tweaking, which cannot be done automatically during merging (i.e. it
should be done by the PR author).

Previously, `validate-commit-message` would always allow
`squash! `-prefixed commits, which would cause problems during merging.

This commit changes `validate-commit-message` to make it configurable
whether such commits are allowed and configures the
`gulp validate-commit-message` task, which is run as part of the `lint`
job on CI, to not allow them.

NOTE: This new check is disabled in the pre-commit git hook that is used
      to validate commit messages, because these commits might still be
      useful during development.

PR Close #32023
2019-08-09 15:12:37 -07:00
George Kalpakas 2b289250d8 refactor: clean up `validate-commit-message` script (#32023)
This sets the ground for adding stricter rules for fixup commits in a
follow-up PR.

PR Close #32023
2019-08-09 15:12:37 -07:00
George Kalpakas ddd02044ea test: clean up and re-organize `validate-commit-message` tests (#32023)
Mainly making the tests more closely follow the order of checks in the
function implementation, so that it is easier to follow.

PR Close #32023
2019-08-09 15:12:37 -07:00
Alex Rickabaugh f90c7a9df0 feat(compiler): allow selector-less directives as base classes (#31379)
In Angular today, the following pattern works:

```typescript
export class BaseDir {
  constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}

@Directive({
  selector: '[child]',
})
export class ChildDir extends BaseDir {
  // constructor inherited from BaseDir
}
```

A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.

In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.

As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:

* the error for a selector-less directive is now generated when an NgModule
  declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
  the compiler, preventing other errors (like their absence in an NgModule)
  from being generated from them.

PR Close #31379
2019-08-09 10:45:22 -07:00
cexbrayat a647298412 feat(forms): formControlName also accepts a number (#30606)
This commit relaxes the type of the `formControlName` input to accept both a `string` and a `number`.

Currently, when using a `FormArray`, most templates look like:

```
<div formArrayName="tags">
  <div *ngFor="let tag of tagsArray.controls; index as i">
    <input [formControlName]="i">
  </div>
</div>
```

Here `formControlName` receives a number whereas its input type is a string.

This is fine for VE and `fullTemplateTypeCheck`, but not for Ivy which does a more thorough type checking on inputs with `fullTemplateTypeCheck` enabled and throws `Type 'number' is not assignable to type 'string'`. It is fixable by using `formControlName="{{i}}"` but you have to know the difference between `a="{{b}}"` and `[a]="b"` and change it all over the application codebase. This commit allows the existing code to still type-check.

PR Close #30606
2019-08-09 10:39:22 -07:00
JiaLiPassion 2a6e6c02ed build(zone.js): update gulp task to gen changelog automatically (#31915)
PR Close #31915
2019-08-02 14:28:49 -07:00
JiaLiPassion fa4e17082c build(zone.js): update changelog of zone.js (#31915)
PR Close #31915
2019-08-02 14:28:49 -07:00
JiaLiPassion 30673090ec build(zone.js): add changelog gulptask for zone.js (#31852)
PR Close #31852
2019-07-26 11:30:08 -07:00
Igor Minar 6ece7db37a build: TypeScript 3.5 upgrade (#31615)
https://github.com/Microsoft/TypeScript/wiki/Breaking-Changes#typescript-35

PR Close #31615
2019-07-25 17:05:23 -07:00
crisbeto 3d7303efc0 perf(ivy): avoid extra parameter in query instructions (#31667)
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.

PR Close #31667
2019-07-24 14:37:51 -07:00
Paul Gschwendtner 1d7aa0a92c build: fix size-tracking tests not running (#31779)
Currently when someone wants to explicitly run the
size-tracking tool tests, the size-tracking tool never
runs because of recent changes for the rules_nodejs
update broke the `entry_point` attribute.

PR Close #31779
2019-07-23 15:48:06 -07:00
crisbeto 0aff4a6919 fix(ivy): incorrect ChangeDetectorRef injected into pipes used in component inputs (#31438)
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.

This PR resolves FW-1419.

PR Close #31438
2019-07-23 15:46:23 -07:00
Matias Niemelä f50dede8f7 refactor(ivy): remove all old styling code prior to refactor (#31193)
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.

PR Close #31193
2019-07-23 15:45:32 -07:00
Pawel Kozlowski d52ae7cbab perf(ivy): match query results on the TView level (#31489)
PR Close #31489
2019-07-19 20:38:08 -07:00
Matias Niemelä 9c954ebc62 refactor(ivy): make styling instructions use the new styling algorithm (#30742)
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.

PR Close #30742
2019-07-19 16:40:40 -07:00
Paul Gschwendtner 10a1e1974b fix(platform-browser): debug element query predicates not compatible with strictFunctionTypes (#30993)
Currently developers can use the `By` class to construct common
`DebugElement` query predicates. e.g. `By.directive(MyDirective)`.

The `directive()` and `all()` predicates are currently returning
a predicate that works for `DebugElement` nodes. This return type
is too strict since the predicate is not specific to `DebugElement`
instances and can also apply to `DebugNode` instances.

Meaning that developers are currently able to use the `directive()`
predicate when using `queryAllNodes()`. This is a common practice
but will break when the project is compiled with TypeScript's
`--strictFunctionTypes` flag as the `DebugElement` predicate type
is not assignable to predicates for `DebugNode`. In order to make
these predicates usable with `--strictFuntionTypes` enabled, we
adjust the predicate type to reflect what is actually needed for
evaluation of the predicate.

PR Close #30993
2019-07-18 14:21:26 -07:00
Paul Gschwendtner 2200884e55 refactor(core): ensure compatibility with typescript strict flag (#30993)
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.

Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)

PR Close #30993
2019-07-18 14:21:25 -07:00
Judy Bogart 1e9eeafa9e docs: clean up router api doc (#31476)
PR Close #31476
2019-07-18 10:33:17 -07:00
crisbeto 40d785f0a0 perf(ivy): avoid generating extra parameters for host property bindings (#31550)
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).

These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.

These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.

PR Close #31550
2019-07-16 13:01:42 -04:00
Joey Perrott 32aa18be78 build: add tsconfig-test to dependency for tsconfig in core/test/strict_types (#31471)
PR Close #31471
2019-07-12 11:38:16 -04:00
Joey Perrott 80fa84c177 build: export tsconfig-test.json file in //tools/BUILD (#31471)
PR Close #31471
2019-07-12 11:38:16 -04:00
George Kalpakas 4bb283cbb2 build: remove redundant `@types/source-map` dependency (#31468)
In version 0.6.1 that we are using, `source-map` ships with
[its own typings][1], so there is no need to use `@types/source-map`.
The types were even removed from `DefinitelyTyped` in
DefinitelyTyped/DefinitelyTyped@1792bfaa2.

[1]: https://github.com/mozilla/source-map/blob/0.6.1/package.json#L72

PR Close #31468
2019-07-11 17:18:12 -04:00
crisbeto ef44f51d58 refactor(ivy): remove instruction usage from other instructions (#31456)
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.

This PR resolves FW-1340.

PR Close #31456
2019-07-11 15:10:20 -04:00
crisbeto 23e0d65471 perf(ivy): add self-closing elementContainer instruction (#31444)
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.

This PR resolves FW-1105.

PR Close #31444
2019-07-09 13:50:28 -07:00
Alex Eagle e6f1b04cd5 fix(zone.js): restore definition of global (#31453)
This partially reverts some changes from 71b9371180 (diff-dd469785fca8680a5b33b1e81c5cfd91R1420)
These broke the g3sync of zone.js because we use the output of the TypeScript compiler directly, rather than rely on the rollup commonjs plugin to define the global symbol

PR Close #31453
2019-07-09 09:34:50 -07:00
George Kalpakas 35f8bfce8b fix(core): export provider interfaces that are part of the public API types (#31377)
Some of the provider interfaces that the [Provider][1] and
[StaticProvider][2] types comprise were not exported from
[@angular/core][3]. As a result, the docs for these symbols did not
appear on angular.io (even though both `Provider` and `StaticProvider`
are part of the public API. (See, also,
https://github.com/angular/angular/pull/31377#discussion_r299254408.)

This commit fixes it by exporting all necessary provider interfaces.

[1]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/interface/provider.ts#L365-L366
[2]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/interface/provider.ts#L283-L284
[3]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/index.ts#L23

PR Close #31377
2019-07-08 09:51:59 -07:00
crisbeto e30f494a39 refactor(ivy): remove interpolation instructions (#31395)
Makes the `interpolateX` instructions internal-only and removes their use of global state.

This PR resolves FW-1387.

PR Close #31395
2019-07-08 09:34:13 -07:00
crisbeto 02491a6ce8 refactor(ivy): move classMap interpolation logic internally (#31211)
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.

These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.

PR Close #31211
2019-07-02 11:07:14 -07:00
Greg Magolan a4a423a083 build: fix build failures with worker mode cache and @types/events (#31325)
Errors observed only in tests on CircleCI — was not reproducible locally.

```
ERROR: /home/circleci/ng/packages/http/test/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/http/test:test_lib failed (Exit 1): tsc_wrapped failed: error executing command
  (cd /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular && \
  exec env - \
    BAZEL_DO_NOT_DETECT_CPP_TOOLCHAIN=1 \
    PATH=/bin:/usr/bin:/usr/local/bin \
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped @@bazel-out/k8-fastbuild/bin/packages/http/test/test_lib_es5_tsconfig.json)
Execution platform: //tools:rbe_ubuntu1604-angular
Compilation failed Error: missing input digest for /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular/external/npm/node_modules/@types/events/index.d.ts.

ERROR: /home/circleci/ng/packages/benchpress/test/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/benchpress/test:test_lib failed (Exit 1): tsc_wrapped failed: error executing command
  (cd /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular && \
  exec env - \
    BAZEL_DO_NOT_DETECT_CPP_TOOLCHAIN=1 \
    PATH=/bin:/usr/bin:/usr/local/bin \
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped @@bazel-out/k8-fastbuild/bin/packages/benchpress/test/test_lib_es5_tsconfig.json)
Execution platform: //tools:rbe_ubuntu1604-angular
Compilation failed Error: missing input digest for /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular/external/npm/node_modules/@types/events/index.d.ts

ERROR: C:/codefresh/volume/angular/packages/compiler/test/css_parser/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/compiler/test/css_parser:css_parser_lib failed (Exit 1):
tsc_wrapped.exe failed: error executing command
  cd C:/users/containeradministrator/_bazel_containeradministrator/zquin2l6/execroot/angular
  SET PATH=C:\msys64\usr\bin;C:\msys64\bin;C:\Windows;C:\Windows\System32;C:\Windows\System32\WindowsPowerShell\v1.0
    SET RUNFILES_MANIFEST_ONLY=1
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped.exe @@bazel-out/x64_windows-fastbuild/bin/packages/compiler/test/css_parser/css_parser_lib_es5_tsconfig.json
Execution platform: @bazel_tools//platforms:host_platform
Compilation failed Error: missing input digest for C:/users/containeradministrator/_bazel_containeradministrator/zquin2l6/execroot/angular/external/npm/node_modules/@types/events/index.
d.ts
```

PR Close #31325
2019-07-01 14:16:43 -07:00
Greg Magolan 361109d80f build: update to rules_nodejs 0.32.2 (#31325)
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)

@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802

also updates to rules_rass commit compatible with rules_nodejs 0.32.0

PR Close #31325
2019-07-01 14:16:42 -07:00
crisbeto 81332150aa perf(ivy): chain host binding instructions (#31296)
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.

This PR resolves FW-1404.

PR Close #31296
2019-06-28 09:26:20 -07:00
Joey Perrott 9c87d223ee ci: target default pool for linux RBE executions (#31297)
PR Close #31297
2019-06-26 13:31:36 -07:00
George Kalpakas 6b7b4ee891 build: fix formatting tasks by ignoring the `zone.js/` directory (#31295)
This was causing issues, because `zone.js` looks like a JS file (despite
it being a directory). The contents of `zone.js/` are still matched by
the globs (it is only the directory itself that is excluded).

Related to #30962.

PR Close #31295
2019-06-26 13:29:29 -07:00
George Kalpakas 279e74603e refactor: move negative glob patterns of files to format close to their positive counterparts (#31295)
This makes it easier to identify which files in directory will be
included and which will be ignored.

PR Close #31295
2019-06-26 13:29:29 -07:00
Paul Gschwendtner e01d697eed build: filter out changelog entries for zone.js from framework changelog (#31277)
We don't want to show entries for the `zone.js` scope in the main framework
changelog file. The zone.js changelog will be handled separately within the
`packages/zone.js` folder. (see [here](https://github.com/angular/angular/pull/31277#issuecomment-505934681))

PR Close #31277
2019-06-26 09:23:02 -07:00
Paul Gschwendtner 59d2edfebe build: allow "zone.js" as scope for commit messages (#31277)
Adds `zone.js` as valid scope for commit messages. This
is necessary because the `zone.js` repository has been
moved into the mono-repo and future changes should be
categorized properly through commit messages.

Currently the pre-commit git hook or CircleCI will fail when
`zone.js` is used as commit scope.

PR Close #31277
2019-06-26 09:23:02 -07:00
Pete Bacon Darwin abbbc69e64 test(ivy): ngcc - remove use of mock-fs in tests (#30591)
Now that ngcc uses a `FileSystem` throughout we no longer need
to rely upon mocking out the real file-system with mock-fs.

PR Close #30591
2019-06-26 08:00:02 -07:00
Alex Rickabaugh 660800ca4e Revert "build: update to rules_nodejs 0.32.2 (#31019)" (#31267)
This reverts commit a38433f36b.

Reason: this causes failures in g3 with i18n extraction. See #31267.

PR Close #31267
2019-06-25 14:36:00 -07:00
Alex Rickabaugh 26a85a82ff Revert "build: fix build failures with worker mode cache and @types/events (#31019)" (#31267)
This reverts commit 6ba42f1da4.

Reason: this causes failures in g3 with i18n extraction. See #31267.

PR Close #31267
2019-06-25 14:36:00 -07:00
Olivier Combe ef9cb6a034 perf(ivy): chain multiple `i18nExp` calls (#31258)
Implement function chaining for `i18nExp` to reduce the output size.

FW-1391 #resolve
PR Close #31258
2019-06-25 11:26:29 -07:00
Greg Magolan 6ba42f1da4 build: fix build failures with worker mode cache and @types/events (#31019)
Errors observed only in tests on CircleCI — was not reproducible locally.

```
ERROR: /home/circleci/ng/packages/http/test/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/http/test:test_lib failed (Exit 1): tsc_wrapped failed: error executing command
  (cd /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular && \
  exec env - \
    BAZEL_DO_NOT_DETECT_CPP_TOOLCHAIN=1 \
    PATH=/bin:/usr/bin:/usr/local/bin \
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped @@bazel-out/k8-fastbuild/bin/packages/http/test/test_lib_es5_tsconfig.json)
Execution platform: //tools:rbe_ubuntu1604-angular
Compilation failed Error: missing input digest for /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular/external/npm/node_modules/@types/events/index.d.ts.

ERROR: /home/circleci/ng/packages/benchpress/test/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/benchpress/test:test_lib failed (Exit 1): tsc_wrapped failed: error executing command
  (cd /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular && \
  exec env - \
    BAZEL_DO_NOT_DETECT_CPP_TOOLCHAIN=1 \
    PATH=/bin:/usr/bin:/usr/local/bin \
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped @@bazel-out/k8-fastbuild/bin/packages/benchpress/test/test_lib_es5_tsconfig.json)
Execution platform: //tools:rbe_ubuntu1604-angular
Compilation failed Error: missing input digest for /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/execroot/angular/external/npm/node_modules/@types/events/index.d.ts

ERROR: C:/codefresh/volume/angular/packages/compiler/test/css_parser/BUILD.bazel:3:1: Compiling TypeScript (devmode) //packages/compiler/test/css_parser:css_parser_lib failed (Exit 1):
tsc_wrapped.exe failed: error executing command
  cd C:/users/containeradministrator/_bazel_containeradministrator/zquin2l6/execroot/angular
  SET PATH=C:\msys64\usr\bin;C:\msys64\bin;C:\Windows;C:\Windows\System32;C:\Windows\System32\WindowsPowerShell\v1.0
    SET RUNFILES_MANIFEST_ONLY=1
  bazel-out/host/bin/external/npm/@bazel/typescript/bin/tsc_wrapped.exe @@bazel-out/x64_windows-fastbuild/bin/packages/compiler/test/css_parser/css_parser_lib_es5_tsconfig.json
Execution platform: @bazel_tools//platforms:host_platform
Compilation failed Error: missing input digest for C:/users/containeradministrator/_bazel_containeradministrator/zquin2l6/execroot/angular/external/npm/node_modules/@types/events/index.
d.ts
```

PR Close #31019
2019-06-25 10:21:07 -07:00
Greg Magolan a38433f36b build: update to rules_nodejs 0.32.2 (#31019)
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)

@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802

also updates to rules_rass commit compatible with rules_nodejs 0.32.0

PR Close #31019
2019-06-25 10:21:07 -07:00
crisbeto 23c017121e perf(ivy): chain multiple attribute instructions (#31152)
Similarly to what we did in #31078, these changes implement chaining for the `attribute` instruction.

This PR resolves FW-1390.

PR Close #31152
2019-06-24 12:33:49 -07:00
Judy Bogart a9502886b1 docs: mark interfaces as public (#30955)
PR Close #30955
2019-06-21 10:21:13 -07:00
Olivier Combe 7ff628f8d5 refactor(ivy): make `bind` an internal-only function (#31131)
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.

FW-1385 #resolve
PR Close #31131
2019-06-20 17:20:56 -07:00
Pete Bacon Darwin 3fb78aaacc feat(upgrade): provide unit test helpers for wiring up injectors (#16848)
Adds two new helper functions that can be used when unit testing Angular services
that depend upon upgraded AngularJS services, or vice versa.
The functions return a module (AngularJS or NgModule) that is configured to wire up
the Angular and AngularJS injectors without the need to actually bootstrap a full
hybrid application.

This makes it simpler and faster to unit test services.

PR Close #16848
2019-06-20 17:04:01 -07:00
JiaLiPassion 5eb7426216 build: move zone.js to angular repo (#30962)
PR Close #30962
2019-06-20 11:27:39 -07:00
Paul Gschwendtner 16ac611a84 build: ts-api-guardian npm package contains invalid references (#31096)
Currently when building the `ts-api-guardian` npm package,
the labels are not properly replaced after recent changes to
the `entry_point` attribute. This means that the `ts-api-guardian`
package is currently not usable externally.

PR Close #31096
2019-06-18 09:50:41 -07:00
Olivier Combe 87168acf39 refactor(ivy): move `bind` instruction into `i18nExp` (#31089)
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.

FW-1384 #resolve
PR Close #31089
2019-06-18 09:49:27 -07:00
Ben Lesh 16aa6ceff8 refactor(ivy): update ɵɵtextBinding to not take index (#30792)
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead

PR Close #30792
2019-06-14 12:22:11 -07:00
cexbrayat 6bc9c78d76 fix(core): temporarily remove @deprecated jsdoc tag for a TextBedStatic.get overload (#30714)
Followup to #30514 which did the same for `TestBed`, but `TestBedStatic` was necessary too.

PR Close #30714
2019-06-14 10:40:42 -07:00
Alex Rickabaugh 0ee09cdd7e refactor(ivy): fix type of factory functions to allow explicit types (#30855)
Factory functions written by the compiler optionally allow an explicit type
to be passed. If called with this type, an instance of the given type will
be created instead of the type for which the factory was generated. This is
used to power inheritance of Angular types, as if the constructor of a class
is inherited from its superclass, then the factory function of the
superclass must be used (it has all the DI info) to construct an instance of
the derived class.

This commit adjusts typings in a few places to allow factory functions to be
called with this extra type parameter.

PR Close #30855
2019-06-11 14:27:17 -07:00
Alex Rickabaugh a4b4f35533 feat(ivy): require 'token' for ngInjectableDef (#30855)
The compiler generates a 'token' field when it emits an ngInjectableDef,
but this field was not required by defineInjectable or the InjectableDef
interface, nor was it added by InjectionToken.

This commit makes 'token' required and adds it where missing.

PR Close #30855
2019-06-11 14:27:16 -07:00
Alex Eagle ef0b2cc74d build: convert entry_point to label (#30627)
PR Close #30627
2019-06-11 00:03:11 +00:00
Santosh Yadav 5c18f23788 fix(common): expose the `HttpUploadProgressEvent` interface as public API (#30852)
Fixes #30814

PR Close #30852
2019-06-07 08:47:47 -07:00
Ben Lesh 3859bcc70c refactor(ivy): remove ɵɵelementAttribute instruction (#30640)
PR Close #30640
2019-06-05 21:29:38 -07:00
Ben Lesh d1df0a94d4 refactor(ivy): remove ɵɵelementProperty instruction (#30645)
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.

PR Close #30645
2019-06-05 09:04:43 -07:00
Misko Hevery fcdd784667 refactor(core): cleanup code with side-effects which was preventing tree-shaking (#30580)
PR Close #30580
2019-06-03 09:01:51 -07:00
Ben Lesh b4e68025f8 refactor(ivy): add ɵɵupdateSyntheticHostBinding command (#30670)
- Refactors `ɵɵcomponentHostSyntheticProperty` into `ɵɵupdateSyntheticHostBinding`, to better align it with other new instructions.

PR Close #30670
2019-06-03 09:00:13 -07:00
Paul Gschwendtner aca339e864 fix(ivy): unable to project into multiple slots with default selector (#30561)
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.

e.g.

```html
<ng-content></ng-content>
<ng-content></ng-content>
```

Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)

This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).

In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).

It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).

Read more here: https://hackmd.io/s/Sy2kQlgTE

PR Close #30561
2019-05-31 09:52:32 -07:00
Olivier Combe 5e0f982961 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-05-30 15:09:02 -04:00
Ben Lesh dd0815095f feat(ivy): add ɵɵtextInterpolateX instructions (#30011)
- `ɵɵtextBinding(..., ɵɵinterpolationX())` instructions will now just be `ɵɵtextInterpolate(...)` instructions

PR Close #30011
2019-05-29 12:38:58 -04:00
Alex Rickabaugh 84dd2679a9 fix(core): require 'static' flag on queries in typings (#30639)
This commit makes the static flag on @ViewChild and @ContentChild required.

BREAKING CHANGE:

In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.

@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.

PR Close #30639
2019-05-24 16:55:00 -04:00
Alex Rickabaugh ccc76f7498 feat(platform-webworker): deprecate platform-webworker (#30642)
DEPRECATION:

platform-webworker has been around since the initial release of Angular
version 2. It began as an experiment to leverage Angular's rendering
architecture and try something different: to run an entire web application
in a web worker.

We've learned a lot from this experiment, and have come to the conclusion
that pushing entire applications to run in a web worker is not a recipe for
success for most applications. This is due to a number of unresolved issues,
including:

* Poor or non-existent support for web worker APIs in web crawlers/indexers.
* Poor support in build and bundling tooling.

As a result, as of Angular version 8, we are deprecating the
`platform-webworker` APIs in Angular. This consists of both NPM packages,
`@angular/platform-webworker` and `@angular/platform-webworker-dynamic`.

Going forward, we will focus our efforts related to web workers around their
primary use case of offloading CPU-intensive but not critical work.

FW-1339 #resolve

PR Close #30642
2019-05-23 15:09:48 -07:00
Alex Rickabaugh f310a5960e feat(core): deprecate integration with the Web Tracing Framework (WTF) (#30642)
DEPRECATION:

Angular previously has supported an integration with the Web Tracing
Framework (WTF) for performance testing of Angular applications. This
integration has not been maintained and likely does not work for the
majority of Angular applications today. As a result, we are deprecating
the integration in Angular version 8.

This deprecation covers the following public APIs:
* `WtfScopeFn`
* `wtfCreateScope`
* `wtfStartTimeRange`
* `wtfEndTimeRange`
* `wtfLeave`

FW-1338 #resolve

PR Close #30642
2019-05-23 15:09:48 -07:00
Ben Lesh 2cdbe9b2ef refactor(ivy): ensure new attribute instructons are available in JIT (#30503)
PR Close #30503
2019-05-22 16:30:29 -07:00
Ben Lesh 7555a46e23 refactor(ivy): add new attribute interpolation instructions (#30503)
PR Close #30503
2019-05-22 16:30:28 -07:00
Ben Lesh 38d7acee4d refactor(ivy): add new ɵɵattribute instruction (#30503)
- adds the ɵɵattribute instruction
- adds compilation handling for Δattribute instruction
- updates tests

PR Close #30503
2019-05-22 16:30:28 -07:00
cexbrayat f6bf8928f2 fix(core): temporarily remove @deprecated jsdoc tag for a TextBed.get overload (#30514)
PR #29290 introduced a new `TestBed.get` signature and deprecated the existing one.
This raises a lot of TSLint deprecation warnings in projects using a strict TS config (see #29905 for context), so we are temporarily removing the `@deprecated` annotation in favor of a plain text warning until we properly fix it.

Refs #29905
Fixes FW-1336

PR Close #30514
2019-05-21 13:11:21 -07:00
Kara Erickson a96976e88f fix(core): remove deprecated `TestBed.deprecatedOverrideProvider` API (#30576)
BREAKING CHANGE

In PR #19558, we fixed a bug in `TestBed.overrideProvider` where
eager providers were not being instantiated correctly. However,
it turned out that since this bug had been around for quite a bit,
many apps were relying on the broken behavior where the providers
would not be instantiated. To assist in the transition, the
`TestBed.deprecatedOverrideProvider` method was temporarily
introduced to mimic the old behavior so that apps would have a
longer time period to migrate their code.

2 years and 3 versions later, it is time to remove the temporary
method. This commit removes `TestBed.deprecatedOverrideProvider`
altogether. Any usages of `TestBed.deprecatedOverrideProvider`
should be replaced with `TestBed.overrideProvider`. This may mean
that providers that were not created before will now be instantiated,
which could mean that your tests need to provide more mocks or stubs
for the dependencies of the newly instantiated providers.

PR Close #30576
2019-05-21 12:37:17 -07:00
Ben Lesh d7eaae6f22 refactor(ivy): Move instructions back to ɵɵ (#30546)
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character

So back to the frog eyes we go.

```
    __
   /ɵɵ\
  ( -- ) - I am ineffable. I am forever.
 _/    \_
/  \  /  \
==  ==  ==
```

PR Close #30546
2019-05-20 16:37:47 -07:00
cexbrayat 95830ee584 feat(common): stricter types for SlicePipe (#30156)
Adds overloads to the `transform` methods of `SlicePipe`,
to have better types than `any` for `value` and `any` as a return.
With this commit, using `slice` in an `ngFor` still allow to type-check the content of the `ngFor`
with `fullTemplateTypeCheck` enabled in Ivy:

    <div *ngFor="let user of users | slice:0:2">{{ user.typo }}</div>
                                                        |
                                                        `typo` does not exist on type `UserModel`

whereas it is currently not catched (as the return of `slice` is `any`) neither in VE nor in Ivy.

BREAKING CHANGE
`SlicePipe` now only accepts an array of values, a string, null or undefined.
This was already the case in practice, and it still throws at runtime if another type is given.
But it is now a compilation error to try to call it with an unsupported type.

PR Close #30156
2019-05-17 14:21:36 -07:00
Greg Magolan b4014e9a39 build(bazel): update to latest stable chromium 74 on osx and linux for karma under bazel (#30502)
We were on 69 for both of these platforms which is fairly old. This update also requires a temporary patch to the @bazel/karma npm package to disable chrome sandboxing on OSX as it is broken under Bazel as of chromium 73. Windows is still on Chromium 66 but updating this will require upstream changes to rules_webtesting as the archive name & executable name has changed as of 72 for Windows and hard-coded paths in rules_webtesting break things.

PR Close #30502
2019-05-16 14:38:14 -07:00
Brandon 6cb3b50a03 docs(docs-infra): add common/upgrade to API package sources (#30331)
Closes #30332

PR Close #30331
2019-05-16 11:47:16 -07:00
JoostK e9ead2bc09 feat(ivy): more accurate type narrowing for `ngIf` directive (#30248)
A structural directive can specify a template guard for an input, such that
the type of that input's binding can be narrowed based on the guard's return
type. Previously, such template guards could only be methods, of which an
invocation would be inserted into the type-check block (TCB). For `NgIf`,
the template guard narrowed the type of its expression to be `NonNullable`
using the following declaration:

```typescript
export declare class NgIf {
  static ngTemplateGuard_ngIf<E>(dir: NgIf, expr: E): expr is NonNullable<E>
}
```

This works fine for usages such as `*ngIf="person"` but starts to introduce
false-positives when e.g. an explicit non-null check like
`*ngIf="person !== null"` is used, as the method invocation in the TCB
would not have the desired effect of narrowing `person` to become
non-nullable:

```typescript
if (NgIf.ngTemplateGuard_ngIf(directive, ctx.person !== null)) {
  // Usages of `ctx.person` within this block would
  // not have been narrowed to be non-nullable.
}
```

This commit introduces a new strategy for template guards to allow for the
binding expression itself to be used as template guard in the TCB. Now,
the TCB generated for `*ngIf="person !== null"` would look as follows:

```typescript
if (ctx.person !== null) {
  // This time `ctx.person` will successfully have
  // been narrowed to be non-nullable.
}
```

This strategy can be activated by declaring the template guard as a
property declaration with `'binding'` as literal return type.

See #30235 for an example where this led to a false positive.

PR Close #30248
2019-05-16 09:48:40 -07:00
Jason Aden 1aff524b63 feat(common): add ability to watch for AngularJS URL updates through `onUrlChange` hook (#30466)
The LocationShim (replacement for `$location`) was added to centralize dealing with the browser URL. Additionally, an `onUrlChange` method was added to Angular's Location service. This PR adds a corresponding method to the LocationShim so updates from AngularJS can be tracked in Angular.

PR Close #30466
2019-05-16 09:43:32 -07:00
Ben Lesh cf86ed7b29 refactor(ivy): migrate ɵɵ prefix back to Δ (#30362)
Now that issues are resolved with Closure compiler, we can move back to our desired prefix of `Δ`.

PR Close #30362
2019-05-14 16:52:15 -07:00
Alex Eagle 06efc340b6 build: update rules_nodejs and clean up bazel warnings (#30370)
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped

PR Close #30370
2019-05-14 10:08:45 -07:00
Kristiyan Kostadinov f74373f2dd fix(ivy): align NgModule registration timing with ViewEngine (#30244)
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.

This PR resolves FW-1285.

PR Close #30244
2019-05-13 11:13:25 -07:00
Alex Eagle 7dad3284e3 release: ts_api_guardian (#30120)
PR Close #30120
2019-05-13 10:53:34 -07:00
Xin Gao 9abf114fbb feat(bazel): use rbe_autoconfig() and new container. (#29336)
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).

Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.

PR Close #29336
2019-05-09 14:58:34 -07:00
Paul Gschwendtner 741a5dc5f7 build: size-tracking test should support max-byte threshold (#30257)
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.

See: https://github.com/angular/angular/pull/30070#discussion_r278332315

PR Close #30257
2019-05-09 12:55:16 -07:00
Matias Niemelä d8665e639b refactor(ivy): drop `element` prefixes for all styling-related instructions (#30318)
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:

BEFORE:
  elementStyling()
  elementStyleProp()
  elementClassProp()
  elementStyleMap()
  elementClassMap()
  elementStylingApply()

AFTER:
  styling()
  styleProp()
  classProp()
  styleMap()
  classMap()
  stylingApply()

PR Close #30318
2019-05-08 15:33:39 -07:00
Matias Niemelä c016e2c4ec refactor(ivy): migrate all host-specific styling instructions to element-level styling instructions (#30336)
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.

PR Close #30336
2019-05-08 14:54:44 -07:00
Matias Niemelä 7c8a62d64d refactor(ivy): remove elementIndex param from all element-level styling instructions (#30313)
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.

PR Close #30313
2019-05-08 09:18:19 -07:00
Matias Niemelä be8fbac942 refactor(ivy): break apart stylingMap into styleMap and classMap instructions (#30293)
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.

PR Close #30293
2019-05-07 11:06:04 -07:00
Kristiyan Kostadinov 68ff2cc323 fix(ivy): host bindings and listeners not being inherited from undecorated classes (#30158)
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.

This PR resolves FW-1275.

PR Close #30158
2019-04-29 13:35:14 -07:00
Paul Gschwendtner 2945f47977 build: add size-tracking bazel test (#30070)
Introduces a new Bazel test that allows us to inspect
what source-files contribute to a given bundled file
and how much bytes they contribute to the bundle size.

Additionally the size-tracking rule groups the size
data by directories. This allows us to compare size
changes in the scope of directories. e.g. a lot of
files in a directory could increase slightly in size, but
in the directory scope the size change could be significant
and needs to be reported by the test target.

Resolves FW-1278

PR Close #30070
2019-04-29 12:29:25 -07:00
Paul Gschwendtner dd59b1d371 build: unable to accept new symbol-extractor golden on windows (#30127)
Currently when working on Windows, it's not possible to accept a new
golden for a `symbol-extractor` Bazel test. This is because the generated
executable output from the `nodejs_binary` rule (without a macro) misses
a Windows executable wrapper that sets up the proper environment
variables for the runfiles. Causing the following failure on Windows:

```
 >>>> FAIL: RUNFILES environment variable is not set. <<<<
```

PR Close #30127
2019-04-26 16:35:51 -07:00
Alan Agius 10705684c8 test: fix api guardian tests on windows when node_modules are not installed (#30105)
When the workspace node_modules are not installed outside of bazel context the api guardian tests fails because the tree artifacts files are not symlinked in windows.

We need to pass the node module location in the node_path

PR Close #30105
2019-04-26 16:32:23 -07:00
Alan Agius 5f95796b61 test: fix ts api guardian and public guard tests on windows (#30105)
This change addresses several issues with ts-api-guardian and public api guards related tests in Windows

The fixes contain 3 main changes:
1) In `stripExportPattern` - replace `^` with `^^^^`  in RegExp due to a double escaping requirment under Windows. Note that under Linux this the extra character has no effect because it's still a valid RegExp in Js.

2. Force `*.patch` files to always be with a LF line sequence instead of CRLF in windows

3. When adding JSDoc comments consider the presence of a carriage return in a line new feed

Partially addresses #29785

PR Close #30105
2019-04-26 16:32:22 -07:00
Ben Lesh f3ce8eeb83 fix(ivy): property bindings use correct indices (#30129)
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests

Related #30011

PR Close #30129
2019-04-26 11:09:51 -07:00
Alan Agius ee12c45473 build: bazel ts-api-guardian usage fails on workspaces which don't depend on `chalk` (#30138)
When using the npm package in a workspace which doesn't depend on chalk, ts-api-guardian fails with an error `Error: Cannot find module 'chalk'`

PR Close #30138
2019-04-26 11:08:05 -07:00
Ben Lesh b9f0720c95 refactor(ivy): undeprecate inject (#30132)
PR Close #30132
2019-04-26 11:06:42 -07:00
Brandon Roberts 6de4cbdd41 fix(common): add upgrade sub-package to ng_package rule for @angular/common (#30117)
Follow-up to #30055 to include @angular/common/upgrade in the npm package

Closes #30116

PR Close #30117
2019-04-25 15:01:17 -07:00
Adam Plumer 3a9d2473ca feat: remove deprecated DOCUMENT token from platform-browser (#28117)
PR Close #28117
2019-04-25 14:40:16 -07:00
George Kalpakas 8f120aff33 refactor(service-worker): DRY up SW registration logic (#21842)
PR Close #21842
2019-04-25 12:29:58 -07:00
JiaLi.Passion 4cfba58072 feat(service-worker): allow configuring when the SW is registered (#21842)
Fixes #20970

PR Close #21842
2019-04-25 12:29:58 -07:00
deebloo 39c0152b76 feat(service-worker): expose `SwRegistrationOptions` token to allow runtime config (#21842)
Previously, the ServiceWorker registration options should be defined as
an object literal (in order for them to be compatible with Ahead-of-Time
compilation), thus making it impossible to base the ServiceWorker
behavior on runtime conditions.
This commit allows specifying the registration options using a regular
provider, which means that it can take advantage of the `useFactory`
option to determine the config at runtime, while still remaining
compatible with AoT compilation.

PR Close #21842
2019-04-25 12:29:58 -07:00
Alex Rickabaugh c61df39323 feat(router): deprecate loadChildren:string (#30073)
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().

DEPRECATION:

When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:

```
[{
  path: 'lazy',
  loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```

This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:

```
[{
  path: 'lazy',
  loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```

This form of lazy loading offers significant advantages in terms of:

* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
  (see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))

As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.

PR Close #30073
2019-04-24 17:06:05 -07:00
Jason Aden 071ee64d91 refactor(common): rename LocationUpgradeService and remove angular/upgrade dependency (#30055)
PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden efdbbe1aa6 test(common): add fallback for URL parsing in older browsers (IE < Edge) (#30055)
PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden 4277600d5e feat(common): provide replacement for AngularJS $location service (#30055)
This commit provides a replacement for `$location`. The new service is written in Angular, and can be consumed into existing applications by using the downgraded version
of the provider.

Prior to this addition, applications upgrading from AngularJS to Angular could get into a situation where AngularJS wanted to control the URL, and would often parse or se
rialize the URL in a different way than Angular. Additionally, AngularJS was alerted to URL changes only through the `$digest` cycle. This provided a buggy feedback loop
from Angular to AngularJS.

With this new `LocationUpgradeProvider`, the `$location` methods and events are provided in Angular, and use Angular APIs to make updates to the URL. Additionally, change
s to the URL made by other parts of the Angular framework (such as the Router) will be listened for and will cause events to fire in AngularJS, but will no longer attempt
 to update the URL (since it was already updated by the Angular framework).

This centralizes URL reads and writes to Angular and should help provide an easier path to upgrading AngularJS applications to Angular.

PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden b635fe80cc feat(common): add APIs to read component pieces of URL (#30055)
Without this change, the framework doesn't surface URL parts such as hostname, protocol, and port. This makes it difficult to rebuild a complete URL. This change provides new APIs to read these values.

PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden b44b14368f feat(common): add ability to retrieve the state from Location service (#30055)
Previously there wasn't a way to retrieve `history.state` from the `Location` service. The only time the framework exposed this value was in navigation events. This meant if you weren't using the Angular router, there wasn't a way to get access to this `history.state` value other than going directly to the DOM.

This PR adds an API to retrieve the value of `history.state`. This will be useful and needed to provide a backwards-compatible `Location` service that can emulate AngularJS's `$location` service since we will need to be able to read the state data in order to produce AngularJS location transition events.

This feature will additionally be useful to any application that wants to access state data through Angular rather than going directly to the DOM APIs.

PR Close #30055
2019-04-24 13:49:28 -07:00
Kristiyan Kostadinov c7f1b0a97f fix(ivy): queries not being inherited from undecorated classes (#30015)
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).

Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.

This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.

PR Close #30015
2019-04-24 10:38:44 -07:00
Alan Agius 04d13429f0 build: fix api guardian error form npm (#30063)
built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'

built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'

This is because the transpiled lib files need to be added to the data.

PR Close #30063
2019-04-23 14:49:20 -07:00
Alan Agius f7960c024c build: use fine grain dependencies for ts-api-guardian (#30051)
At the moment `ts_api_guardian_test` rule depends on the entire node_modules tree, this is causing an input file tree of over 71473 in the material repo which is failing RBE

With this change we add only the required dependencies to as data attribute instead of the `@npm//:node_modules`

With this change we should also reduce the `Too many open files in system` error that sometimes crops up

PR Close #30051
2019-04-23 08:29:06 -07:00
Ben Lesh 0bcb2320ba feat(ivy): generate ɵɵpropertyInterpolateX instructions (#30008)
- Compiler now generates `ɵɵpropertyInterpolateX` instructions.

PR Close #30008
2019-04-22 17:10:36 -07:00
Ben Lesh 10217bb3bc feat(ivy): generate ɵɵproperty instructions (#29946)
PR Close #29946
2019-04-19 16:07:52 -07:00
Alan Agius d7f7826363 build: publish ts-api-guardian rule in the npm package (#29977)
With this change downstream users will no longer need to build ts-api-guardian from source as now the bazel rule is available in the npm package.

This can be used by installing ts-api-guardian as a devDependency and changing the load syntax from:
```
load("@angular//tools/ts-api-guardian:index.bzl", "ts_api_guardian_test")
```

to:
```
load("@npm_ts_api_guardian//:index.bzl", "ts_api_guardian_test")
```

**Note**: downstream users should also clean their `WORKSPACE` and remove the dependencies of angular workspace.

PR Close #29977
2019-04-19 10:59:23 -07:00
Alex Eagle b9251fd707 build: Remove cc_binary dependency on brotli (#29912)
Just use the JavaScript port instead. We don't care about speed since we compress once as a build step.

PR Close #29912
2019-04-17 17:20:16 -07:00
Alan Agius 4bde40f7c2 fix(core): don't include a local `EventListener` in typings (#29809)
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)

This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.

With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.

Fixes #29806

PR Close #29809
2019-04-17 16:45:35 -07:00
Greg Magolan ce2713f5b1 build(bazel): remove @ts-api-guardian_deps yarn_install (#29799)
PR Close #29799
2019-04-17 13:02:03 -07:00
Filipe Silva 2bfb6a02e2 fix(router): support non-NgFactory promise in loadChildren typings (#29832)
PR Close #29832
2019-04-16 10:46:12 -07:00
Alex Rickabaugh 9147092a15 Revert "feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)" (#29918)
This reverts commit 6a8cca7975.

PR Close #29918
2019-04-15 16:55:51 -07:00
Ben Lesh b2962db4cb test: add additional test for codeGenApi (#29844)
Addresses comments made by @gkalpak in #29820

PR Close #29844
2019-04-15 10:51:24 -07:00
Olivier Combe 6a8cca7975 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-04-15 10:40:26 -07:00
Alex Rickabaugh b0578061ce refactor(ivy): use ɵɵ instead of Δ for now (#29850)
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.

This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.

PR Close #29850
2019-04-11 16:27:56 -07:00
Olivier Combe 91c7b451d5 feat(ivy): support i18n without closure (#28689)
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close #28689
2019-04-11 08:28:45 -07:00
Ben Lesh ddadb8e22c refactor(ivy): Update @publicApi to @codeGenApi on ivy instructions (#29820)
- Removes `@publicApi` annotation from ivy instructions
- Adds new `@codeGenApi` annotation to ivy instructions
- Updates ts_api_guardian to support the new annotation properly

PR Close #29820
2019-04-11 08:19:23 -07:00
Kristiyan Kostadinov def73a6728 perf(ivy): avoid storing raw selectors in projectionDef (#29578)
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.

These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.

PR Close #29578
2019-04-11 08:09:09 -07:00
Filipe Silva ef85336719 build: update to TypeScript 3.4 (#29372)
PR Close #29372
2019-04-10 12:12:16 -07:00
Ben Lesh 138ca5a246 refactor(ivy): prefix all generated instructions (#29692)
- Updates all instructions to be prefixed with the Greek delta symbol

PR Close #29692
2019-04-10 12:11:40 -07:00
Matias Niemelä ec56354306 fix(ivy): ensure parent/sub-class components evaluate styling correctly (#29602)
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.

Jira Issue: FW-1132

PR Close #29602
2019-04-05 16:49:52 -07:00
Carlos Ortiz García 609024f93d fix(core): Deprecate TestBed.get(...):any (#29290)
Adds an overload to TestBed.get making parameters strongly typed and
deprecated previous signature that accepted types `any`. The function
still returns `any` to prevent build breakages, but eventually stronger
type checks will be added so a future Angular version will break builds
due to additional type checks.
See previous breaking change - #13785

Issue #26491

PR Close #29290
2019-04-04 15:32:23 -07:00
Carlos Ortiz García afd4a4ed4d feat(core): Add "AbstractType<T>" interface (#29295)
This new interface will match classes whether they are abstract or
concrete. Casting as `AbstractType<MyConcrete>` will return a type that
isn't newable. This type will be used to match abstract classes in the
`get()` functions of `Injector` and `TestBed`.
Type isn't used yet so this isn't a breaking change.

Issue #26491

PR Close #29295
2019-04-02 16:07:22 -07:00
Alex Eagle b14537a004 fix(bazel): use //:tsconfig.json as the default for ng_module (#29670)
This matches the behavior of ts_library

PR Close #29670
2019-04-02 15:57:11 -07:00
Alex Eagle 03d914a6c2 build: hide @angular/http for Angular v8 (#29550)
Currently our plan is to skip the publish, docgen, and update steps for this package.
During RC, we'll determine if the breaking change is too difficult for users, in which case we might restore the package for another major.

PR Close #29550
2019-04-02 10:55:31 -07:00
Pete Bacon Darwin 9f54d76ef5 refactor(upgrade): use Bazel packages to avoid symlinks in the source (#29466)
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.

These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.

This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.

Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.

PR Close #29466
2019-04-02 10:38:01 -07:00
Ben Lesh 1c07061246 refactor: change error message (#29594)
Removes usage of whitelist from error messages, comments and test descriptions in ts_api_guardian

Related to #28539

PR Close #29594
2019-04-02 10:29:33 -07:00
Greg Magolan 7c1f73ac7b build(bazel): update to nodejs rules 0.27.9 (#29647)
PR Close #29647
2019-04-02 10:27:14 -07:00
Paul Gschwendtner 8badf9808a build: add pre-release check that validates the version name (#29551)
Currently with the release of "8.0.0-beta.10", the Bazel npm packag accidentally
was stamped with an incorrect version placeholder: `8.0.0-beta.10+1.sha-a28b3e3`.

This can happen because the placeholder is based on latest tag that matches the
Semver format. e.g. if `HEAD` equals to the commit that has the latest tag, the
version name will be correct and refer to the tag name (e.g. `8.0.0-beta.10`). Though
if the latest commit is not tagged with the most recent tag, the version
name will also include the SHA of the commit (e.g.  `8.0.0-beta.10+1.sha-a28b3e3`).

We can ensure that we don't accidentally release versions from a more recent commit
that shouldn't be part of the release by adding a pre-release check that ensures that
the `BUILD_SCM_VERSION` Bazel status variable matches the expected version format.

PR Close #29551
2019-03-27 12:26:13 -07:00
Marc Laval c412374854 fix(ivy): DebugNode.query should query nodes in the logical tree (#29480)
PR Close #29480
2019-03-26 12:48:37 -07:00
Filipe Silva 26a8c5961e fix(router): support NgFactory promise in loadChildren typings (#29392)
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.

PR Close #29392
2019-03-25 09:30:28 -07:00
Kristiyan Kostadinov cfe6581fc8 test(ivy): remove passing test from blocklist (#29484)
Removes the test that was fixed by https://github.com/angular/material2/pull/15555 from the blocklist.

PR Close #29484
2019-03-22 16:46:00 -07:00
Greg Magolan 693b350567 build: add @npm//jasmine-core dep back to jasmine_node_test in defaults.bzl (#29444)
PR Close #29444
2019-03-21 09:59:13 -07:00
Greg Magolan 0b27c09b51 build(bazel): also back out of jasmine bootstrap simplification (#29444)
PR Close #29444
2019-03-21 09:59:13 -07:00
Marc Laval 17b3f11e07 fix(ivy): ChangeDetectorRef should be injectable on ng-container (#29424)
PR Close #29424
2019-03-20 15:14:21 -04:00
Marc Laval 3249020466 test(ivy): update root cause of failures in MatBadge (#29422)
PR Close #29422
2019-03-20 13:37:53 -04:00
Kristiyan Kostadinov d6e27a41ed test(ivy): remove passing snack bar test from blocklist (#29423)
Removes the test that was fixed by https://github.com/angular/material2/pull/15551 from the blocklist.

PR Close #29423
2019-03-20 13:35:15 -04:00
Greg Magolan ea90435a6b build(bazel): fix jasmine_node_test defaults (#29375)
PR Close #29375
2019-03-19 23:39:37 -04:00
Greg Magolan ea0e832e5f build(bazel): update to nodejs rules 0.27.6 (#29375)
PR Close #29375
2019-03-19 23:39:36 -04:00
Greg Magolan 603df13b14 build(bazel): update to @bazel/jasmine 0.27.4 (#29375)
PR Close #29375
2019-03-19 23:39:36 -04:00
Kara Erickson f9b7b6d2f1 test(ivy): add new material tests to blocklist (#29409)
After rebasing Material on master, we found new tests that were
added and are still failing. This commit adds them to the blocklist
so we can fix them.

PR Close #29409
2019-03-19 23:28:38 -04:00
Ben Lesh d87b035ebb refactor(ivy): Update query-related comments (#29342)
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.

Also adds a demo from @mhevery to one of the query specs

Related #29031

PR Close #29342
2019-03-18 17:37:20 -04:00
Matias Niemelä b759d63389 revert: refactor(ivy): Update query-related comments (#29342) 2019-03-18 13:39:10 -07:00
Ben Lesh fe759ee0cf refactor(ivy): Update query-related comments (#29342)
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.

Also adds a demo from @mhevery to one of the query specs

Related #29031

PR Close #29342
2019-03-18 15:09:03 -04:00