Previously, when you attempted to bootstrap a component that had a
router-outlet using ngsummaries, it would complain that the component
was not provided by any module even if it was. This commit fixes a
mistake (AFAICT) which caused the lookup of the component in the AOT
summaries to fail.
I believe this change is safe. I've run the affected tests within Google
and there were no breakages caused by this change.
PR Close#24892
CanLoad now defines UrlSegment[] as a second parameter of the function.
Users can store the initial url segments and refer to them later, e.g. to go
back to the original url after authentication via router.navigate(urlSegments).
Existing code still works as before because the second function parameter
does not have to be defined.
Closes#12411
PR Close#13127
Within an @NgModule it's common to include in the imports a call to
a ModuleWithProviders function, for example RouterModule.forRoot().
The old ngc compiler was able to handle this pattern because it had
global knowledge of metadata of not only the input compilation unit
but also all dependencies.
The ngtsc compiler for Ivy doesn't have this knowledge, so the
pattern of ModuleWithProviders functions is more difficult. ngtsc
must be able to determine which module is imported via the function
in order to expand the selector scope and properly tree-shake
directives and pipes.
This commit implements a solution to this problem, by adding a type
parameter to ModuleWithProviders through which the actual module
type can be passed between compilation units.
The provider side isn't a problem because the imports are always
copied directly to the ngInjectorDef.
PR Close#24862
This commit adds the ivy-local tag to //packages/router. Since the
router depends on //packages/upgrade, it makes that package
compatible with ngtsc as well.
PR Close#24862
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
Two new CircleCI environments are created: test_ivy_jit and test_ivy_aot.
Both run a subset of the tests that have been marked with Bazel tags as
being appropriate for that environment.
Once all the tests pass, builds are published to the *-builds repo both
for the legacy View Engine compiled code as well as for ivy-jit and ivy-aot.
PR Close#24309
This change adds to internal API hooks (undocumented API) for
`before/afterPreactivation`. The immediate need for this API is to
allow applications to build support for marshalling navigation between
a web worker and the main application.
Fixes#24202
PR Close#24204
The recognizer code used to call Object.freeze() on queryParams before
using them to construct ActivatedRoutes, with the intent being to help
avoid common invalid usage. Unfortunately, Object.freeze() works
in-place, so this was also freezing the queryParams on the actual
UrlTree object, making it more difficult to manipulate UrlTrees in
things like UrlHandlingStrategy.
This change simply shallow-copies the queryParams before freezing them.
Fixes#22617
PR Close#22663
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
This flag is picked up by webpack v4 and used for more agressive optimizations.
Our code is already side-effect free, because that's what we needed for build-optimizer to work.
PR Close#22785
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
BREAKING CHANGE: after this change, npm and yarn will issue incompatible peerDependencies warning
We don't expect this to actually break an application, but the application/library package.json
will need to be updated to provide tslib 1.9.0 or higher.
PR Close#22667
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
"ng update" supports having multiple packages as part of a group which should be updated together, meaning that e.g. calling "ng update @angular/core" would be equivalent to updating all packages of the group (that are part of the package.json already).
In order to support the grouping feature, the package.json of the version the user is updating to needs to include an "ng-update" key that points to this metadata.
The entire specification for the update workflow can be found here: 2e8b12a4ef/docs/specifications/update.md
PR Close#22482
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
This is a more defensive approach to ensure that references to
ParamInheritanceType from the published declarations do not cause
compilation errors when compiling Angular from the published packages.
Fixes#21456
PR Close#21773
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
Bazel runs on newer version of RxJs than is installed in Yarn. The never version subclasses `EmptyError` in a different way which fails the `instanceof` check. This change makes the `instanceof` check more robust with respect to `EmptyError`.
PR Close#21053
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
* The problem was with the `fireChildActivationStart` function. It was taking a `path` param, which was an
array of `ActivatedRouteSnapshot`s. The function was being fired for each piece of the route that was being
activated. This resulted in far too many `ChildActivationStart` events being fired, and being fired on routes
that weren't actually getting activated. This change fires the event only for those routes that are actually
being activated.
fixes#18942
PR Close#19043
* Introduced with #18407, `RouteEvents` don't actually have a common constructor. Reverting here to be able to add new functionality to ChildActivation events.
PR Close#19043
* Remove now unnecessary portions of build.
* Add a compilePackageES5 method to build ES5 from sources
* Rework all package.json and rollup config files to new format
* Remove "extends" from tsconfig-build.json files and fixup compilation roots
PR Close#18541
BREAKING CHANGE: `RouterOutlet` properties `locationInjector` and `locationFactoryResolver` have been removed as they were deprecated since v4.
PR Close#18781
BREAKING CHANGE: the values `true`, `false`, `legacy_enabled` and `legacy_disabled` for the router parameter `initialNavigation` have been removed as they were deprecated. Use `enabled` or `disabled` instead.
PR Close#18781
Destructuring of the form:
function foo({a, b}: {a?, b?} = {})
breaks strictNullChecks, due to the TypeScript bug https://github.com/microsoft/typescript/issues/10078.
This change eliminates usage of destructuring in function argument lists in cases where it would leak
into the public API .d.ts.
Hybrid apps (mix of Angular and AngularJS) might return AngularJS implementation
of Promises that do not play well with the change detection. Wrapping them in
native Promises fix this issue.
This could be the case when a Resolver returns a `$q` promise.
* refactor(core): provide error message in stack for reflective DI
Fixes#16355
* fix(compiler): make AOT work with `noUnusedParameters`
Fixes#15532
* refactor: use view engine also for `NgModuleFactory`s
This is a prerequisite for being able to mock providers
in AOTed code later on.
* docs(animations): fix links to `Component` animations
* docs(core): fix links to `ReflectiveInjector` methods
The `resolve` and other methods were moved from the
`Injector` to the `ReflectiveInjector`.
* docs(core): fix links to `Renderer`
The local links were assuming that that methods were on the
current document (e.g. `RootRenderer`), but they are actually
on the `Renderer` class.
* docs(router): fix links to methods
* docs(forms): fix links to methods
* docs(core): fix links to methods
* docs(router): fix API page links and an internal link
The Router use the type `Params` for all of:
- position parameters,
- matrix parameters,
- query parameters.
`Params` is defined as follow `type Params = {[key: string]: any}`
Because parameters can either have single or multiple values, the type should
actually be `type Params = {[key: string]: string | string[]}`.
The client code often assumes that parameters have single values, as in the
following exemple:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParams
.map(params => params['session_id'] || 'None');
}
}
```
The problem here is that `params['session_id']` could be `string` or `string[]`
but the error is not caught at build time because of the `any` type.
Fixing the type as describe above would break the build because `sessionId`
would becomes an `Observable<string | string[]>`.
However the client code knows if it expects a single or multiple values. By
using the new `ParamMap` interface the user code can decide when it needs a
single value (calling `ParamMap.get(): string`) or multiple values (calling
`ParamMap.getAll(): string[]`).
The above exemple should be rewritten as:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParamMap
.map(paramMap => paramMap.get('session_id') || 'None');
}
}
```
Added APIs:
- `interface ParamMap`,
- `ActivatedRoute.paramMap: ParamMap`,
- `ActivatedRoute.queryParamMap: ParamMap`,
- `ActivatedRouteSnapshot.paramMap: ParamMap`,
- `ActivatedRouteSnapshot.queryParamMap: ParamMap`,
- `UrlSegment.parameterMap: ParamMap`
fixes#12869fixes#12889fixes#13885fixes#13870
Before this change there was a single injector tree.
Now we have 2 injector trees, one for the modules and one for the components.
This fixes lazy loading modules.
See the design docs for details:
https://docs.google.com/document/d/1OEUIwc-s69l1o97K0wBd_-Lth5BBxir1KuCRWklTlI4
BREAKING CHANGES
`ComponentFactory.create()` takes an extra optional `NgModuleRef` parameter.
No change should be required in user code as the correct module will be used
when none is provided
DEPRECATIONS
The following methods were used internally and are no more required:
- `RouterOutlet.locationFactoryResolver`
- `RouterOutlet.locationInjector`
BREAKING CHANGE:
Perviously, any provider that had an ngOnDestroy lifecycle hook would be created eagerly.
Now, only classes that are annotated with @Component, @Directive, @Pipe, @NgModule are eager. Providers only become eager if they are either directly or transitively injected into one of the above.
This also makes all `useValue` providers eager, which
should have no observable impact other than code size.
EXPECTED IMPACT:
Making providers eager was an incorrect behavior and never documented.
Also, providers that are used by a directive / pipe / ngModule stay eager.
So the impact should be rather small.
Fixes#14552
Matt Keller
Trotyl
Jason Aden
Marcus Krahl
Anthony Humes
Stephen Fluin
George Wilde
Adrien Samson
Alex Rickabaugh
sergeome
George Kalpakas
Sarun Intaralawan
Igor Minar
Rado Kirov
Victor Savkin
Alex Eagle
swseverance
Zaven Muradyan
Steven Liekens
Pete Bacon Darwin
JiaLi.Passion
Veres Lajos
Vikram Subramanian
Hans Larsen
Victor Berchet
Oussama Ben Brahim
Dan Bucholtz
vsavkin
Patrick Shields
courtneypattison
Siyao Li
Miško Hevery
Yuan Gao
Mark Kennedy
Tobias Bosch
Chuck Jazdzewski
Alex Eagle
Olivier Combe
cexbrayat
Jan Peer Stöcklmair
Dzmitry Shylovich
Lars Gyrup Brink Nielsen
Sam Verschueren
Roy Ling
Yaroslav Admin
Jason Aden
Igor Minar
Pawel Kozlowski
Rafael
Robert Spier
Matias Niemelä
Aaron Hoffman
Marc Laval
Dzmitry Shylovich
Ethan Veres
Ward Bell
Igor Minar
JB Nizet
Filipe Silva