Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
With 5cecd97493 we intended to expand
the input type of the `disabled` input of the `NgModel` directive.
Read more about the reason for this in the actual commit message.
Currently though, the acceptance coercion member does not have any
effect. This is because the acceptance member needs to refer to the
actual input property name, and not to the public input name.
`disabled` corresponds to the `isDisabled` property.
PR Close#34502
NgModel internally coerces any arbitrary value that will assigned
to the `disabled` `@Input` to a boolean. This has been done to
support the common case where developers set the disabled attribute
without a value. For example:
```html
<input type="checkbox" [(ngModel)]="value" disabled>
```
This worked in View Engine without any errors because inputs were
not strictly checked. In Ivy though, developers can opt-in into
strict template type checking where the attribute would be flagged.
This is because the `NgModel#isDisabled` property type-wise only
accepts a `boolean`. To ensure that the common pattern described
above can still be used, and to reflect the actual runtime behavior,
we should add an acceptance member that makes it work without type
checking errors.
Using a coercion member means that this is not a breaking change.
PR Close#34438
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
This is a follow-up to #33997 where some new generic parameters were added without defaults which is technically a breaking change. These changes add the defaults.
PR Close#34206
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
In ccc76f749, `@angular/platform-webworker` and
`@angular/platform-webworker-dynamic` were deprecated (i.e. by
deprecating all their public APIs). However, some public
`@angular/platform-webworker` APIs were accidentally missed,
additionally resulting in the package itself not showing up as
deprecated on angular.io.
This commit fixes it by marking those remaining public APIs as
deprecated.
PR Close#33824
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
For abstract directives, i.e. directives without a selector, it may
happen that their constructor is called explicitly from a subclass,
hence its parameters are not required to be valid for Angular's DI
purposes. Prior to this commit however, having an abstract directive
with a constructor that has parameters that are not eligible for
Angular's DI would produce a compilation error.
A similar scenario may occur for `@Injectable`s, where an explicit
`use*` definition allows for the constructor to be irrelevant. For
example, the situation where `useFactory` is specified allows for the
constructor to be called explicitly with any value, so its constructor
parameters are not required to be valid. For `@Injectable`s this is
handled by generating a DI factory function that throws.
This commit implements the same solution for abstract directives, such
that a compilation error is avoided while still producing an error at
runtime if the type is instantiated implicitly by Angular's DI
mechanism.
Fixes#32981
PR Close#32987
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
With Ivy the `entryComponents` array isn't necessary anymore. These changes mark it as deprecated so that it can be removed in a future version.
PR Close#33205
BREAKING CHANGE:
In v5, we deprecated support for the intl API in order to improve the browser support. We are now removing these deprecated APIs for v9. See the original change here for more info on why: #18284.
PR Close#29250
Injectable defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectableDef to "prov" (for "provider", since injector defs
are known as "inj"). This is because property names cannot
be minified by Uglify without turning on property mangling
(which most apps have turned off) and are thus size-sensitive.
PR Close#33151
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33151
Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Removes the deprecated `ngForm` element selector and all of the code related to it.
BREAKING CHANGES:
* `<ngForm></ngForm>` can no longer be used as a selector. Use `<ng-form></ng-form>` instead.
* The `NgFromSelectorWarning` directive has been removed.
* `FormsModule.withConfig` has been removed. Use the `FormsModule` directly.
PR Close#33058
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
Removes the `Renderer` and related symbols which have been deprecated since version 4.
BREAKING CHANGES:
* `Renderer` has been removed. Use `Renderer2` instead.
* `RenderComponentType` has been removed. Use `RendererType2` instead.
* `RootRenderer` has been removed. Use `RendererFactory2` instead.
PR Close#33019
Currently the `ngForOf` input accepts `null` or `undefined` as valid
values. Although when using strict template input type checking
(which will be supported by `ngtsc`), passing `null` or `undefined`
with strict null checks enabled causes a type check failure because
the type for the `ngForOf` input becomes too strict if strict null checks
are enabled. The type of the input needs to be expanded to also accept
`null` or `undefined` to behave consistently regardless of the
`strictNullChecks` flag.
This is necessary because whenever strict input type checking is enabled
by default, most of the Angular projects that use `*ngFor` with the async pipe
will either need to disable template type checking or strict null checks
because the `async` pipe returns `null` if the observable hasn't been
emitted yet.
See for example how this affects the `angular/components` repository and
how much bloat the workaround involves: https://github.com/angular/components/pull/16373/files#r296942696.
PR Close#31371
This is a re-submit of #32686.
Switches back to having the static flag be optional on ViewChild and ContentChild queries, in preparation for changing its default value.
PR Close#32986
Switches back to having the `static` flag be optional on `ViewChild` and `ContentChild` queries, in preparation for changing its default value.
PR Close#32686
`InitialNavigation` is used in `ExtraOptions`, which is already part of
the public API. Thus, `InitialNavigation` should be too. Not publicly
exporting it from `router/index.ts` seems an omission, since the type is
already annotated with the `@publicApi` JSDoc tag.
By publicly exporting `InitialNavigation`, it will also correctly appear
in the API docs on angular.io.
PR Close#32707
As discussed in https://hackmd.io/33M5Wb-JT7-0fneA0JuHPA `SourceMessage`
strings are not sufficient for matching translations.
This commit updates `@angular/localize` to use `MessageId`s for translation
matching instead.
Also the run-time translation will now log a warning to the console if a
translation is missing.
BREAKING CHANGE:
Translations (loaded via the `loadTranslations()` function) must now use
`MessageId` for the translation key rather than the previous `SourceMessage`
string.
PR Close#32594
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
This is a refactoring that moves the source code around to provide a better
platform for adding the compile-time inlining.
1. Move the global side-effect import from the primary entry-point to a
secondary entry-point @angular/localize/init.
This has two benefits: first it allows the top level entry-point to
contain tree-shakable shareable code; second it gives the side-effect
import more of an "action" oriented name, which indicates that importing
it does something tangible
2. Move all the source code into the top src folder, and import the localize
related functions into the localize/init/index.ts entry-point.
This allows the different parts of the package to share code without
a proliferation of secondary entry-points (i.e. localize/utils).
3. Avoid publicly exporting any utilities at this time - the only public
API at this point are the global `$localize` function and the two runtime
helpers `loadTranslations()` and `clearTranslations()`.
This does not mean that we will not expose additional helpers for 3rd
party tooling in the future, but it avoid us preemptively exposing
something that we might want to change in the near future.
Notes:
It is not possible to have the `$localize` code in the same Bazel package
as the rest of the code. If we did this, then the bundled `@angular/localize/init`
entry-point code contains all of the helper code, even though most of it is not used.
Equally it is not possible to have the `$localize` types (i.e. `LocalizeFn`
and `TranslateFn`) defined in the `@angular/localize/init` entry-point because
these types are needed for the runtime code, which is inside the primary
entry-point. Importing them from `@angular/localize/init` would run the
side-effect.
The solution is to have a Bazel sub-package at `//packages/localize/src/localize`
which contains these types and the `$localize` function implementation.
The primary `//packages/localize` entry-point imports the types without
any side-effect.
The secondary `//packages/localize/init` entry-point imports the `$localize`
function and attaches it to the global scope as a side-effect, without
bringing with it all the other utility functions.
BREAKING CHANGES:
The entry-points have changed:
* To attach the `$localize` function to the global scope import from
`@angular/localize/init`. Previously it was `@angular/localize`.
* To access the `loadTranslations()` and `clearTranslations()` functions,
import from `@angular/localize`. Previously it was `@angular/localize/run_time`.
PR Close#32488
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
Hayouung
Paul Gschwendtner
Alex Rickabaugh
Kristiyan Kostadinov
Feliks Khantsis
Danny Skoog
Igor Minar
George Kalpakas
Pete Bacon Darwin
JiaLiPassion
JoostK
Olivier Combe
Matias Niemelä
Kara Erickson
LASLEDJ
atscott
Alan Agius
Carlos Ortiz García