Several new functionalities are possible with this change: the most requested is that callers can now check whether a control has a required validator. Other uses include incrementally changing the validators set without doing an expensive operation to reset all validators.
Closes#13461.
PR Close#42838
We can’t determine whether the user actually meant the `back` or
the `forward` using the popstate event (triggered by a browser
back/forward)
so we instead need to store information on the state and compute the
distance the user is traveling withing the browser history.
So by using the `History#go` method,
we can bring the user back to the page where he is supposed to be after
performing the action.
implementation for #13586
PR Close#38884
Close#41867
In the previous commit https://github.com/angular/angular/pull/41562#issuecomment-822696973,
the error thrown in the event listener will be caught and re-thrown, but there is a bug
in the commit, if there is only one listener for the specified event name, the error
will not be re-thrown, so this commit fixes the issue and make sure the error is re-thrown.
PR Close#41868
Currently we save a reference to an `LView` on most DOM nodes created by Angular either by saving
the `LView` directly in the `__ngContext__` or by saving the `LContext` which has a reference to
the `LView`. This can be a problem if the DOM node is retained in memory, because the `LView` has
references to all of the child nodes of the view, as well as other internal data structures.
Previously we tried to resolve the issue by clearing the `__ngContext__` when a node is removed
(see https://github.com/angular/angular/pull/36011), but we decided not to proceeed, because it can
slow down destruction due to a megamorphic write.
These changes aim to address the issue while reducing the performance impact by assigning a unique
ID when an `LView` is created and adding it to `__ngContext__`. All active views are tracked in
a map where their unique ID is used as the key. We don't need to worry about leaks within that map,
because `LView`s are an internal data structure and we have complete control over when they are
created and destroyed.
Fixes#41047.
PR Close#41358
This ensure that the name of the lazy chunk remains the same during updates. When not using `namedChunks` the id of the bundle is set to "deterministic", which means that the bundle name changes whenever the bundle is updated.
PR Close#41636
In Angular CLI 12, application can only be compiled using Ivy, therefore we shouldn't run these tests when Bazel runs with View Engine context.
PR Close#41434
This is a temporary workaround until the CLI version containing a fix for the regression caused by deacc74 is available on NPM.
Without this change CLI builds will fail with;
```
angularCompiler.getNextProgram is not a function
```
PR Close#41434
With this change we update several dependencies to avoid Renovate creating a lot of PRs during onboarding. We also remove yarn workspaces as after further analysis these are not needed.
Certain dependencies such as `@octokit/rest`, `remark` and `@babel/*` have not been updated as they require a decent amount of work to update, and it's best to leave them for a seperate PR.
PR Close#41434
Add new method `historyGo`, that will let
the user navigate to a specific page from session history identified by its
relative position to the current page.
We add some tests to `location_spec.ts` to validate the behavior of the
`historyGo` and `forward` methods.
Add more tests for `location_spec` to test `location.historyGo(0)`, `location.historyGo()`,
`location.historyGo(100)` and `location.historyGo(-100)`. We also add new tests for
`Integration` spec to validate the navigation when we using
`location#historyGo`.
Update the `historyGo` function docs
Note that this was made an optional function in the abstract classes to
avoid a breaking change. Because our location classes use `implements PlatformLocation`
rather than `extends PlatformLocation`, simply adding a default
implementation was not sufficient to make this a non-breaking change.
While we could fix the classes internal to Angular, this would still have been
a breaking change for any external developers who may have followed our
implementations as an example.
PR Close#38890
Introduces an **internal**, **experimental** `profiler` function, which
the runtime invokes around user code, including before and after:
- Running the template function of a component
- Executing a lifecycle hook
- Evaluating an output handler
The `profiler` function invokes a callback set with the global
`ng.ɵsetProfiler`. This API is **private** and **experimental** and
could be removed or changed at any time.
This implementation is cheap and available in production. It's cheap
because the `profiler` function is simple, which allows the JiT compiler
to inline it in the callsites. It also doesn't add up much to the
production bundle.
To listen for profiler events:
```ts
ng.ɵsetProfiler((event, ...args) => {
// monitor user code execution
});
```
PR Close#41255
With this change we move `XhrFactory` to the root entrypoint of `@angular/commmon`, this is needed so that we can configure `XhrFactory` DI token at a platform level, and not add a dependency between `@angular/platform-browser` and `@angular/common/http`.
Currently, when using `HttpClientModule` in a child module on the server, `ReferenceError: XMLHttpRequest is not defined` is being thrown because the child module has its own Injector and causes `XhrFactory` provider to be configured to use `BrowserXhr`.
Therefore, we should configure the `XhrFactory` at a platform level similar to other Browser specific providers.
BREAKING CHANGE:
`XhrFactory` has been moved from `@angular/common/http` to `@angular/common`.
**Before**
```ts
import {XhrFactory} from '@angular/common/http';
```
**After**
```ts
import {XhrFactory} from '@angular/common';
```
Closes#41311
PR Close#41313
This commit updates Forms code to avoid direct references to all built-in ControlValueAccessor classes, which
prevents their tree-shaking from production builds. Instead, a new static property is added to all built-in
ControlValueAccessors, which is checked when we need to identify whether a given ControlValueAccessors is a
built-in one.
PR Close#41146
The `DomAdapter` is present in all Angular apps and its methods aren't tree shakeable.
These changes remove the methods that either aren't being used anymore or were only
used by our own tests. Note that these changes aren't breaking, because the adapter
is an internal API.
The following methods were removed:
* `getProperty` - only used within our own tests.
* `log` - Guaranteed to be defined on `console`.
* `logGroup` and `logGroupEnd` - Only used in one place. It was in the DomAdapter for built-in null checking.
* `logGroupEnd` - Only used in one place. It was placed in the DomAdapter for built in null checking.
* `performanceNow` - Only used in one place that has to be invoked through the browser console.
* `supportsCookies` - Unused.
* `getCookie` - Unused.
* `getLocation` and `getHistory` - Only used in one place which appears to have access to the DOM
already, because it had direct accesses to `window`. Furthermore, even if this was being used
in a non-browser context already, the `DominoAdapter` was set up to throw an error.
The following APIs were changed to be more compact:
* `supportsDOMEvents` - Changed to a readonly property.
* `remove` - No longer returns the removed node.
PR Close#41102
Previously, injector definitions contained a `factory` property that
was used to create a new instance of the associated NgModule class.
Now this factory has been moved to its own `ɵfac` static property on the
NgModule class itself. This is inline with how directives, components and
pipes are created.
There is a small size increase to bundle sizes for each NgModule class,
because the `ɵfac` takes up a bit more space:
Before:
```js
let a = (() => {
class n {}
return n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({factory: function(t) { return new (t || n) }, imports: [[e.a.forChild(s)], e.a]}),
n
})(),
```
After:
```js
let a = (() => {
class n {}
return n.\u0275fac = function(t) { return new (t || n) },
n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({imports: [[r.a.forChild(s)], r.a]}),
n
})(),
```
In other words `n.\u0275fac = ` is longer than `factory: ` (by 5 characters)
and only because the tooling insists on encoding `ɵ` as `\u0275`.
This can be mitigated in a future PR by only generating the `ɵfac` property
if it is actually needed.
PR Close#41022
This commit adds a Forms-based test app into the `integration` folder to have an ability to measure and keep
track of payload size for the changes in Forms package.
PR Close#41045
This commit adds more configurability to the `Router#isActive` method
and `RouterLinkActive#routerLinkActiveOptions`.
It allows tuning individual match options for query params and the url
tree, which were either both partial or both exact matches in the past.
Additionally, it also allows matching against the fragment and matrix
parameters.
fixes#13205
BREAKING CHANGE:
The type of the `RouterLinkActive.routerLinkActiveOptions` input was
expanded to allow more fine-tuned control. Code that previously read
this property may need to be updated to account for the new type.
PR Close#40303
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
This commit adds support for Finnish full date formatting,
as well as `c/cc/ccc/cccc/ccccc/cccccc` date formats in the `DatePipe`.
Fixes#26922
PR Close#40766
The injector system uses a bloom filter to determine if a token is
possibly defined in the node injector tree, which is stored across
multiple bloom buckets that each represent 32 bits of the full 256-bit
wide bloom hash. This means that a computation is required to determine
the exact bloom bucket which is responsible for storing any given 32-bit
interval, which was previously computed using three bitmask operations
and three branches to derive the bloom bucket offset.
This commit exploits the observation that all bits beyond the low 5 bits
of the bloom hash are an accurate representation for the bucket offset,
if shifted right such that those bits become the least significant bits.
This reduces the three bitmask operations and three branches with a
single shift operation, while additionally offering a code size
improvement.
PR Close#40489
Previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail and it should not be the thing which determines
how often change event should fire.
This change introduces a new `emitDistinctChangesOnly` option for
`ContentChildren` and `ViewChildren`.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option will become the default in the future
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
PR Close#40091
There are two parts to this commit:
1. Revert the changes from #38379. This change had an incomplete view of
how things worked and also diverged the implementations of
`applyRedirects` and `recognize` even more.
2. Apply the fixes from the `recognize` algorithm to ensure that named
outlets with empty path parents can be matched. This change also passes
all the tests that were added in #38379 with the added benefit of being
a more complete fix that stays in-line with the `recognize` algorithm.
This was made possible by using the same approach for `split` by
always creating segments for empty path matches (previously, this was
only done in `applyRedirects` if there was a `redirectTo` value). At the
end of the expansions, we need to squash all empty segments so that
serializing the final `UrlTree` returns the same result as before.
Fixes#39952Fixes#10726Closes#30410
PR Close#40029
DI providers can be defined via `useFactory` function, which may have arguments configured via `deps` array.
The `deps` array may contain DI flags represented by DI decorators (such as `@Self`, `@SkipSelf`, etc). Prior to this
commit, having the `@Host` decorator in `deps` array resulted in runtime error in Ivy. The problem was that the `@Host`
decorator was not taken into account while `useFactory` argument list was constructed, the `@Host` decorator was
treated as a token that should be looked up.
This commit updates the logic which prepares `useFactory` arguments to recognize the `@Host` decorator.
PR Close#40122
Differs tries to inject parent differ in order to support extending.
This does not work in the 'root' injector as the provider overrides the
default injector. The fix is to just assume standard set of providers
and extend those instead.
PR close#25015
Issue close#11309 `Can't extend IterableDiffers`
Issue close#18554 `IterableDiffers.extend is not AOT compatible`
(This is fixed because we no longer have an arrow function in the
factory but a proper function which can be imported.)
PR Close#39981
This commit adds `ngDevMode` guard to run `checkNoChanges` only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake this code from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
This commit adds `ngDevMode` guard to show sanitization warnings only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake these warnings from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39959
In the new behavior Angular removes applications from the testability registry when the
root view gets destroyed. This eliminates a memory leak, because before that the
TestabilityRegistry holds references to HTML elements, thus they cannot be GCed.
PR Close#22106
PR Close#39876
Due to historical reasons `Injector.__NG_ELEMENT_ID__` was set to `-1`.
This changes it to be consistent with other `*Ref.__NG_ELEMENT_ID__`
constructs.
PR Close#39621
Close#39348
Now `NgZone` has an option `shouldCoalesceEventChangeDetection` to coalesce
multiple event handler's change detections to one async change detection.
And there are some cases other than `event handler` have the same issues.
In #39348, the case like this.
```
// This code results in one change detection occurring per
// ngZone.run() call. This is entirely feasible, and can be a serious
// performance issue.
for (let i = 0; i < 100; i++) {
this.ngZone.run(() => {
// do something
});
}
```
So such kind of case will trigger multiple change detections.
And now with Ivy, we have a new `markDirty()` API will schedule
a requestAnimationFrame to trigger change detection and also coalesce
the change detections in the same event loop, `markDirty()` API doesn't
only take care `event handler` but also all other cases `sync/macroTask/..`
So this PR add a new option to coalesce change detections for all cases.
test(core): add test case for shouldCoalesceEventChangeDetection option
Add new test cases for current `shouldCoalesceEventChangeDetection` in `ng_zone.spec`, since
currently we only have integration test for this one.
PR Close#39422
In ViewEngine, SelfSkip would navigate up the tree to get tokens from
the parent node, skipping the child. This restores that functionality in
Ivy. In ViewEngine, if a special token (e.g. ElementRef) was not found
in the NodeInjector tree, the ModuleInjector was also used to lookup
that token. While special tokens like ElementRef make sense only in a
context of a NodeInjector, we preserved ViewEngine logic for now to
avoid breaking changes.
We identified 4 scenarios related to @SkipSelf and special tokens where
ViewEngine behavior was incorrect and is likely due to bugs. In Ivy this
is implemented to provide a more intuitive API. The list of scenarios
can be found below.
1. When Injector is used in combination with @Host and @SkipSelf on the
first Component within a module and the injector is defined in the
module, ViewEngine will get the injector from the module. In Ivy, it
does not do this and throws instead.
2. When retrieving a @ViewContainerRef while @SkipSelf and @Host are
present, in ViewEngine, it throws an exception. In Ivy it returns the
host ViewContainerRef.
3. When retrieving a @ViewContainerRef on an embedded view and @SkipSelf
is present, in ViewEngine, the ref is null. In Ivy it returns the parent
ViewContainerRef.
4. When utilizing viewProviders and providers, a child component that is
nested within a parent component that has @SkipSelf on a viewProvider
value, if that provider is provided by the parent component's
viewProviders and providers, ViewEngine will return that parent's
viewProviders value, which violates how viewProviders' visibility should
work. In Ivy, it retrieves the value from providers, as it should.
These discrepancies all behave as they should in Ivy and are likely bugs
in ViewEngine.
PR Close#39464
Close#38863
Monkey patches `queueMicrotask()` API, so the callback runs in the zone
when scheduled, and also the task is run as `microTask`.
```
Zone.current.fork({
name: 'queueMicrotask',
onScheduleTask: (delegate: ZoneDelegate, curr: Zone, target: Zone, task: Task) => {
logs.push(task.type);
logs.push(task.source);
return delegate.scheduleTask(target, task);
}
}).run(() => {
queueMicrotask(() => {
expect(logs).toEqual(['microTask', 'queueMicrotask']);
expect(Zone.current.name).toEqual('queueMicrotask');
done();
});
});
```
PR Close#38904
`TNode.insertBeforeIndex` is only populated when i18n is present. This
change puts all code which reads `insertBeforeIndex` behind a
dynamically loaded functions which are set only when i18n code executes.
PR Close#39301
The `ExpandoInstructions` was unnecessarily convoluted way to solve the
problem of calling the `HostBindingFunction`s on components and
directives. The code was complicated and hard to fallow.
The replacement is a simplified way to achieve the same thing, which
is also more efficient in space and speed.
PR Close#39301
IMPORTANT: `HEADER_OFFSET` should only be refereed to the in the `ɵɵ*` instructions to translate
instruction index into `LView` index. All other indexes should be in the `LView` index space and
there should be no need to refer to `HEADER_OFFSET` anywhere else.
PR Close#39233
Before this refactoring/fix the ICU would store the current selected
index in `TView`. This is incorrect, since if ICU is in `ngFor` it will
cause issues in some circumstances. This refactoring properly moves the
state to `LView`.
closes#37021closes#38144closes#38073
PR Close#39233
As of Angular v4, four of the options for
`ExtraOptions#initialNavigation` have been deprecated. We intend
to remove them in v11. The final state for these options is:
`enabledBlocking`, `enabledNonBlocking`, and `disabled`. We plan
to remove and deprecate the remaining option in the next two
major releases.
New options:
- `enabledNonBlocking`: same as legacy_enabled
- `enabledBlocking`: same as enabled
BREAKING CHANGE:
* The `initialNavigation` property for the options in
`RouterModule.forRoot` no longer supports `legacy_disabled`,
`legacy_enabled`, `true`, or `false` as valid values.
`legacy_enabled` (the old default) is instead `enabledNonBlocking`
* `enabled` is deprecated as a valid value for the
`RouterModule.forRoot` `initialNavigation` option. `enabledBlocking`
has been introduced to replace it
PR Close#37480
Removes `ViewEncapsulation.Native` which has been deprecated for several major versions.
BREAKING CHANGES:
* `ViewEncapsulation.Native` has been removed. Use `ViewEncapsulation.ShadowDom` instead. Existing
usages will be updated automatically by `ng update`.
PR Close#38882
Dylan Hunn
Ahmed Ayed
JiaLiPassion
Alan Agius
Kristiyan Kostadinov
mgechev
Andrew Kushnir
Pete Bacon Darwin
Sagar Pandita
Andrew Scott
Paul Gammans
Joey Perrott
kirjs
JoostK
Misko Hevery
Martin Sikora
arturovt
Jessica Janiuk
Igor Minar
Adam