angular-cn/aio/content/guide/lifecycle-hooks.md

@title Lifecycle Hooks

@intro Angular calls lifecycle hook methods on directives and components as it creates, changes, and destroys them.

@description

A component has a lifecycle managed by Angular.

Angular creates it, renders it, creates and renders its children, checks it when its data-bound properties change, and destroys it before removing it from the DOM.

Angular offers lifecycle hooks that provide visibility into these key life moments and the ability to act when they occur.

A directive has the same set of lifecycle hooks, minus the hooks that are specific to component content and views.

Contents

• Component lifecycle hooks overview

• Lifecycle sequence

• Interfaces are optional (technically)

• Other Angular lifecycle hooks

• Lifecycle examples

• Peek-a-boo: all hooks

• Spying OnInit and OnDestroy

  • OnInit
  • OnDestroy

• OnChanges

• DoCheck

• AfterView

  • Abide by the unidirectional data flow rule

• AfterContent

  • Content projection
  • AfterContent hooks
  • No unidirectional flow worries with AfterContent

Try the .

{@a hooks-overview}

Component lifecycle hooks overview

Directive and component instances have a lifecycle as Angular creates, updates, and destroys them. Developers can tap into key moments in that lifecycle by implementing one or more of the lifecycle hook interfaces in the Angular core library.

Each interface has a single hook method whose name is the interface name prefixed with ng. For example, the OnInit interface has a hook method named ngOnInit() that Angular calls shortly after creating the component:

No directive or component will implement all of the lifecycle hooks and some of the hooks only make sense for components. Angular only calls a directive/component hook method if it is defined.

{@a hooks-purpose-timing}

Lifecycle sequence

After creating a component/directive by calling its constructor, Angular calls the lifecycle hook methods in the following sequence at specific moments:

<th>
  Hook
</th>

<th>
  Purpose and Timing
</th>

<td>
  <code>ngOnChanges()</code>
</td>

<td>


  Respond when Angular (re)sets data-bound input properties.
  The method receives a `SimpleChanges` object of current and previous property values.

  Called before `ngOnInit()` and whenever one or more data-bound input properties change.

</td>

<td>
  <code>ngOnInit()</code>
</td>

<td>


  Initialize the directive/component after Angular first displays the data-bound properties
  and sets the directive/component's input properties.

  Called _once_, after the _first_ `ngOnChanges()`.

</td>

<td>
  <code>ngDoCheck()</code>
</td>

<td>


  Detect and act upon changes that Angular can't or won't detect on its own.

  Called during every change detection run, immediately after `ngOnChanges()` and `ngOnInit()`.

</td>

<td>
  <code>ngAfterContentInit()</code>
</td>

<td>


  Respond after Angular projects external content into the component's view.

  Called _once_ after the first `ngDoCheck()`.

  _A component-only hook_.

</td>

<td>
  <code>ngAfterContentChecked()</code>
</td>

<td>


  Respond after Angular checks the content projected into the component.

  Called after the `ngAfterContentInit()` and every subsequent `ngDoCheck()`.

  _A component-only hook_.

</td>

<td>
  <code>ngAfterViewInit()</code>
</td>

<td>


  Respond after Angular initializes the component's views and child views.

  Called _once_ after the first `ngAfterContentChecked()`.

  _A component-only hook_.

</td>

<td>
  <code>ngAfterViewChecked()</code>
</td>

<td>


  Respond after Angular checks the component's views and child views.

  Called after the `ngAfterViewInit` and every subsequent `ngAfterContentChecked()`.

  _A component-only hook_.

</td>

<td>
  <code>ngOnDestroy</code>
</td>

<td>


  Cleanup just before Angular destroys the directive/component.
  Unsubscribe Observables and detach event handlers to avoid memory leaks.

  Called _just before_ Angular destroys the directive/component.

</td>

{@a interface-optional}

Interfaces are optional (technically)

The interfaces are optional for JavaScript and Typescript developers from a purely technical perspective. The JavaScript language doesn't have interfaces. Angular can't see TypeScript interfaces at runtime because they disappear from the transpiled JavaScript.

Fortunately, they aren't necessary. You don't have to add the lifecycle hook interfaces to directives and components to benefit from the hooks themselves.

Angular instead inspects directive and component classes and calls the hook methods if they are defined. Angular finds and calls methods like ngOnInit(), with or without the interfaces.

Nonetheless, it's good practice to add interfaces to TypeScript directive classes in order to benefit from strong typing and editor tooling.

{@a other-lifecycle-hooks}

Other Angular lifecycle hooks

Other Angular sub-systems may have their own lifecycle hooks apart from these component hooks.

3rd party libraries might implement their hooks as well in order to give developers more control over how these libraries are used.

Lifecycle examples

The demonstrates the lifecycle hooks in action through a series of exercises presented as components under the control of the root AppComponent.

They follow a common pattern: a parent component serves as a test rig for a child component that illustrates one or more of the lifecycle hook methods.

Here's a brief description of each exercise:

<th>
  Component
</th>

<th>
  Description
</th>

<td>
  <a href="#peek-a-boo">Peek-a-boo</a>
</td>

<td>


  Demonstrates every lifecycle hook.
  Each hook method writes to the on-screen log.
</td>

<td>
  <a href="#spy">Spy</a>
</td>

<td>


  Directives have lifecycle hooks too.
  A `SpyDirective` can log when the element it spies upon is
  created or destroyed using the `ngOnInit` and `ngOnDestroy` hooks.

  This example applies the `SpyDirective` to a `<div>` in an `ngFor` *hero* repeater
  managed by the parent `SpyComponent`.
</td>

<td>
  <a href="#onchanges">OnChanges</a>
</td>

<td>


  See how Angular calls the `ngOnChanges()` hook with a `changes` object
  every time one of the component input properties changes.
  Shows how to interpret the `changes` object.
</td>

<td>
  <a href="#docheck">DoCheck</a>
</td>

<td>


  Implements an `ngDoCheck()` method with custom change detection.
  See how often Angular calls this hook and watch it post changes to a log.
</td>

<td>
  <a href="#afterview">AfterView</a>
</td>

<td>


  Shows what Angular means by a *view*.
  Demonstrates the `ngAfterViewInit` and `ngAfterViewChecked` hooks.
</td>

<td>
  <a href="#aftercontent">AfterContent</a>
</td>

<td>


  Shows how to project external content into a component and
  how to distinguish projected content from a component's view children.
  Demonstrates the `ngAfterContentInit` and `ngAfterContentChecked` hooks.
</td>

<td>
  Counter
</td>

<td>


  Demonstrates a combination of a component and a directive
  each with its own hooks.

  In this example, a `CounterComponent` logs a change (via `ngOnChanges`)
  every time the parent component increments its input counter property.
  Meanwhile, the `SpyDirective` from the previous example is applied
  to the `CounterComponent` log where it watches log entries being created and destroyed.

</td>

The remainder of this page discusses selected exercises in further detail.

{@a peek-a-boo}

Peek-a-boo: all hooks

The PeekABooComponent demonstrates all of the hooks in one component.

You would rarely, if ever, implement all of the interfaces like this. The peek-a-boo exists to show how Angular calls the hooks in the expected order.

This snapshot reflects the state of the log after the user clicked the Create... button and then the Destroy... button.

The sequence of log messages follows the prescribed hook calling order: OnChanges, OnInit, DoCheck (3x), AfterContentInit, AfterContentChecked (3x), AfterViewInit, AfterViewChecked (3x), and OnDestroy.

The constructor isn't an Angular hook per se. The log confirms that input properties (the name property in this case) have no assigned values at construction.

Had the user clicked the Update Hero button, the log would show another OnChanges and two more triplets of DoCheck, AfterContentChecked and AfterViewChecked. Clearly these three hooks fire often. Keep the logic in these hooks as lean as possible!

The next examples focus on hook details.

{@a spy}

Spying OnInit and OnDestroy

Go undercover with these two spy hooks to discover when an element is initialized or destroyed.

This is the perfect infiltration job for a directive. The heroes will never know they're being watched.

Kidding aside, pay attention to two key points:

1. Angular calls hook methods for directives as well as components.
   
   

2. A spy directive can provide insight into a DOM object that you cannot change directly. Obviously you can't touch the implementation of a native <div>. You can't modify a third party component either. But you can watch both with a directive.

The sneaky spy directive is simple, consisting almost entirely of ngOnInit() and ngOnDestroy() hooks that log messages to the parent via an injected LoggerService.

You can apply the spy to any native or component element and it'll be initialized and destroyed at the same time as that element. Here it is attached to the repeated hero <div>:

Each spy's birth and death marks the birth and death of the attached hero <div> with an entry in the Hook Log as seen here:

Adding a hero results in a new hero <div>. The spy's ngOnInit() logs that event.

The Reset button clears the heroes list. Angular removes all hero <div> elements from the DOM and destroys their spy directives at the same time. The spy's ngOnDestroy() method reports its last moments.

The ngOnInit() and ngOnDestroy() methods have more vital roles to play in real applications.

{@a oninit}

OnInit()

Use ngOnInit() for two main reasons:

1. To perform complex initializations shortly after construction.
2. To set up the component after Angular sets the input properties.

Experienced developers agree that components should be cheap and safe to construct.

Misko Hevery, Angular team lead, explains why you should avoid complex constructor logic.

Don't fetch data in a component constructor. You shouldn't worry that a new component will try to contact a remote server when created under test or before you decide to display it. Constructors should do no more than set the initial local variables to simple values.

An ngOnInit() is a good place for a component to fetch its initial data. The Tour of Heroes Tutorial and HTTP Client guides show how.

Remember also that a directive's data-bound input properties are not set until after construction. That's a problem if you need to initialize the directive based on those properties. They'll have been set when ngOnInit() runs.

The ngOnChanges() method is your first opportunity to access those properties. Angular calls ngOnChanges() before ngOnInit() and many times after that. It only calls ngOnInit() once.

You can count on Angular to call the ngOnInit() method soon after creating the component. That's where the heavy initialization logic belongs.

{@a ondestroy}

OnDestroy()

Put cleanup logic in ngOnDestroy(), the logic that must run before Angular destroys the directive.

This is the time to notify another part of the application that the component is going away.

This is the place to free resources that won't be garbage collected automatically. Unsubscribe from Observables and DOM events. Stop interval timers. Unregister all callbacks that this directive registered with global or application services. You risk memory leaks if you neglect to do so.

{@a onchanges}

OnChanges()

Angular calls its ngOnChanges() method whenever it detects changes to input properties of the component (or directive). This example monitors the OnChanges hook.

The ngOnChanges() method takes an object that maps each changed property name to a SimpleChange object holding the current and previous property values. This hook iterates over the changed properties and logs them.

The example component, OnChangesComponent, has two input properties: hero and power.

The host OnChangesParentComponent binds to them like this:

Here's the sample in action as the user makes changes.

The log entries appear as the string value of the power property changes. But the ngOnChanges does not catch changes to hero.name That's surprising at first.

Angular only calls the hook when the value of the input property changes. The value of the hero property is the reference to the hero object. Angular doesn't care that the hero's own name property changed. The hero object reference didn't change so, from Angular's perspective, there is no change to report!

{@a docheck}

DoCheck()

Use the DoCheck hook to detect and act upon changes that Angular doesn't catch on its own.

Use this method to detect a change that Angular overlooked.

The DoCheck sample extends the OnChanges sample with the following ngDoCheck() hook:

This code inspects certain values of interest, capturing and comparing their current state against previous values. It writes a special message to the log when there are no substantive changes to the hero or the power so you can see how often DoCheck is called. The results are illuminating:

While the ngDoCheck() hook can detect when the hero's name has changed, it has a frightful cost. This hook is called with enormous frequency—after every change detection cycle no matter where the change occurred. It's called over twenty times in this example before the user can do anything.

Most of these initial checks are triggered by Angular's first rendering of unrelated data elsewhere on the page. Mere mousing into another <input> triggers a call. Relatively few calls reveal actual changes to pertinent data. Clearly our implementation must be very lightweight or the user experience suffers.

{@a afterview}

AfterView

The AfterView sample explores the AfterViewInit() and AfterViewChecked() hooks that Angular calls after it creates a component's child views.

Here's a child view that displays a hero's name in an <input>:

The AfterViewComponent displays this child view within its template:

The following hooks take action based on changing values within the child view, which can only be reached by querying for the child view via the property decorated with @ViewChild.

{@a wait-a-tick}

Abide by the unidirectional data flow rule

The doSomething() method updates the screen when the hero name exceeds 10 characters.

Why does the doSomething() method wait a tick before updating comment?

Angular's unidirectional data flow rule forbids updates to the view after it has been composed. Both of these hooks fire after the component's view has been composed.

Angular throws an error if the hook updates the component's data-bound comment property immediately (try it!). The LoggerService.tick_then() postpones the log update for one turn of the browser's JavaScript cycle and that's just long enough.

Here's AfterView in action:

Notice that Angular frequently calls AfterViewChecked(), often when there are no changes of interest. Write lean hook methods to avoid performance problems.

{@a aftercontent}

AfterContent

The AfterContent sample explores the AfterContentInit() and AfterContentChecked() hooks that Angular calls after Angular projects external content into the component.

{@a content-projection}

Content projection

Content projection is a way to import HTML content from outside the component and insert that content into the component's template in a designated spot.

AngularJS developers know this technique as transclusion.

Consider this variation on the previous AfterView example. This time, instead of including the child view within the template, it imports the content from the AfterContentComponent's parent. Here's the parent's template:

Notice that the <my-child> tag is tucked between the <after-content> tags. Never put content between a component's element tags unless you intend to project that content into the component.

Now look at the component's template:

The <ng-content> tag is a placeholder for the external content. It tells Angular where to insert that content. In this case, the projected content is the <my-child> from the parent.

The telltale signs of content projection are twofold:

• HTML between component element tags.
• The presence of <ng-content> tags in the component's template.

{@a aftercontent-hooks}

AfterContent hooks

AfterContent hooks are similar to the AfterView hooks. The key difference is in the child component.

• The AfterView hooks concern ViewChildren, the child components whose element tags appear within the component's template.

• The AfterContent hooks concern ContentChildren, the child components that Angular projected into the component.

The following AfterContent hooks take action based on changing values in a content child, which can only be reached by querying for them via the property decorated with @ContentChild.

{@a no-unidirectional-flow-worries}

No unidirectional flow worries with AfterContent

This component's doSomething() method update's the component's data-bound comment property immediately. There's no need to wait.

Recall that Angular calls both AfterContent hooks before calling either of the AfterView hooks. Angular completes composition of the projected content before finishing the composition of this component's view. There is a small window between the AfterContent... and AfterView... hooks to modify the host view.