This commit allows compliance test-cases to be written that specify
source-map mappings between the source and generated code.
To check a mapping, add a `// SOURCE:` comment to the end of a line:
```
<generated code> // SOURCE: "<source-url>" <source code>
```
The generated code will still be checked, stripped of the `// SOURCE` comment,
as normal by the `expectEmit()` helper.
In addition, the source-map segments are checked to ensure that there is a
mapping from `<generated code>` to `<source code>` found in the file at
`<source-url>`.
Note:
* The source-url should be absolute, with the directory containing the
TEST_CASES.json file assumed to be `/`.
* Whitespace is important and will be included when comparing the segments.
* There is a single space character between each part of the line.
* Newlines within a mapping must be escaped since the mapping and comment
must all appear on a single line of this file.
PR Close#39939
Previously one could set a flag in a `TEST_CASES.json` file to exclude
the test-cases from being run if the input files were being compiled
partially and then linked.
There are also scenarios where one might want to exclude test-cases
from "full compile" mode test runs.
This commit changes the compliance test tooling to support a new
property `compilationModeFilter`, which is an array containing one or
more of `"full compile"` and `"linked compile"`. Only the tests
whose `compilationModeFilter` array contains the current compilation
mode will be run.
PR Close#39939
Previously files were serialized with an extra newline seperator that
was not removed when parsing. This caused the parsed file to start with
an extra newline that invalidated its source-map.
Also, the splitting was producing an empty entry at the start of the extracted
golden files which is now ignored.
PR Close#39939
The schema accidentally included the `expectedErrors` and `extraCheck`
properties below the `files` property instead of below the `expectations`
property.
PR Close#39939
Add a TaggedTemplateExpr to represent tagged template literals in
Angular's syntax tree (more specifically Expression in output_ast.ts).
Also update classes that implement ExpressionVisitor to add support for
tagged template literals in different contexts, such as JIT compilation
and conversion to JS.
Partial support for tagged template literals had already been
implemented to support the $localize tag used by Angular's i18n
framework. Where applicable, this code was refactored to support
arbitrary tags, although completely replacing the i18n-specific support
for the $localize tag with the new generic support for tagged template
literals may not be completely trivial, and is left as future work.
PR Close#39122
Add test for when `checkTypeOfDomReferences = false` to ensure that we
do not regress in behavior at any point. The desired behavior for this
case is that the `TemplateTypeChecker` will honor the user's
configuration and not produce symbols for the dom reference.
PR Close#39539
Differs tries to inject parent differ in order to support extending.
This does not work in the 'root' injector as the provider overrides the
default injector. The fix is to just assume standard set of providers
and extend those instead.
PR close#25015
Issue close#11309 `Can't extend IterableDiffers`
Issue close#18554 `IterableDiffers.extend is not AOT compatible`
(This is fixed because we no longer have an arrow function in the
factory but a proper function which can be imported.)
PR Close#39981
Remove the check-env script as it is not longer relied on and only surfaces
false positives/known mismatches at this point.
Since our tooling now acts using vendored code where needed, this is no
longer as necessary as it previously was.
PR Close#39980
Previously, when a PR which does not target the master branch in the Github UI was
merged it would not close automatically. This change detects when this case occurs
and closes the PR via the Github API.
For example:
A PR which targets the 11.0.x branch in the Github UI has the `target: patch` label
This PR is only pushed into the 11.0.x branch, which does not trigger Github's
reference based actions to close the PR.
PR Close#39979
We intend to run the `@angular/upgrade` tests against all supported
versions of AngularJS (v1.5+). Previously, we only ran them against
v1.5, v1.6 and v1.7.
Since AngularJS v1.8 was released recently, this commit adds it to the
list of AngularJS versions we test against.
PR Close#39972
This commit adds `ngDevMode` guard to call `_ngModelWarning` only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake this function from production builds
(since it will act as no-op, in dev mode everything will work as it works right now)
to decrease production bundle size.
PR Close#39964
This commit adds ngDevMode guard to show warning only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The ngDevMode flag helps to tree-shake this warning from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
This commit adds ngDevMode guard to show warnings only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The ngDevMode flag helps to tree-shake these warnings from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
This commit adds `ngDevMode` guard to run `checkNoChanges` only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake this code from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
The partial compiler will add a version number to the objects that are
generated so that the linker can select the appropriate partial linker
class to process the metadata.
Previously this version matching was a simple number check. Now
the partial compilation writes the current Angular compiler version
into the generated metadata, and semantic version ranges are used
to select the appropriate partial linker.
PR Close#39847
This commit adds `ngDevMode` guard to show sanitization warnings only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake these warnings from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39959
This commit adds support in the Ivy Language Service for autocompletion in a
global context - e.g. a {{foo|}} completion.
Support is added both for the primary function `getCompletionsAtPosition` as
well as the detail functions `getCompletionEntryDetails` and
`getCompletionEntrySymbol`. These latter operations are not used yet as an
upstream change to the extension is required to advertise and support this
capability.
PR Close#39250
This expands the deprecation message that started to pop up in v11.0.3
after the landing of commit e148382bd0,
that deprecated the `{[key: string]: any}` type for the options property of the `FormBuilder.group` method.
It turns out that having a custom validator declared as
`{ validators: (group: FormGroup) => ValidationErrors|null }` works in practice,
but is now inferred by TS as the deprecated version of `group`
(because `FormGroup` is a subclass of `AbstractControl` that `ValidatorFn` expects).
We considered the possibility of tweaking the forms API to accept such validators,
but it turns out to generate too many changes in the framework or possible breaking changes for Angular users.
We settled for a more explicit deprecation message, elaborated with the help of @petebacondarwin.
This will hopefully help developers to understand why the deprecation warning is showing up
when they think they are already using the non-deprecated overload.
PR Close#39946
The newly built compliance test runner was not using the shared source
file cache that was added in b627f7f02e,
which offers a significant performance boost to the compliance test
targets.
PR Close#39956
In the past, the legacy (VE-based) language service would use a
`UrlResolver` instance to resolve file paths, primarily for compiler
resources like external templates. The problem with this is that the
UrlResolver is designed to resolve URLs in general, and so for a path
like `/a/b/#c`, `#c` is treated as hash/fragment rather than as part
of the path, which can lead to unexpected path resolution (f.x.,
`resolve('a/b/#c/d.ts', './d.html')` would produce `'a/b/d.html'` rather
than the expected `'a/b/#c/d.html'`).
This commit resolves the issue by using Node's `path` module to resolve
file paths directly, which aligns more with how resources are resolved
in the Ivy compiler.
The testing story here is not great, and the API for validating a file
path could be a little bit prettier/robust. However, since the VE-based
language service is going into more of a "maintenance mode" now that
there is a clear path for the Ivy-based LS moving forward, I think it is
okay not to spend too much time here.
Closes https://github.com/angular/vscode-ng-language-service/issues/892
Closes https://github.com/angular/vscode-ng-language-service/issues/1001
PR Close#39917
Create stubs for `findRenameLocations` for both VE and Ivy Language Service
implementations. This will prevent failed requests when it is implemented on the vscode plugin side.
PR Close#39919
At the moment, when creating a root module, a subscription to the
`onError` subject is also created. It captures the scope where `NgModuleRef`
is created and prevents it from being garbage collected. Also note that this
`NgModuleRef` has a reference to the root module instance (e.g. `AppModule`),
which also prevents it from being GC'd.
PR Close#39940
Since #39853, it is possible to deploy to multiple Firebase sites from a
single branch. In order to deploy to a site, we need to associate an
alias (`aio`) with a site. This is done via the `firebase target:apply`
command. However, when the command is called multiple times, it
associates the alias with many sites, which subsequently fails during
deployment ([example failure][1]), since the `firebase deploy` command
does not know what site to deploy to.
This commit fixes the deployment script by ensuring that any previous
association with the `aio` alias is cleared (via the
`firebase target:clear` command) before associating it with a new site.
[1]: https://circleci.com/gh/angular/angular/871020
PR Close#39948
When the compiler is invoked via ngc or the Angular CLI, its APIs are used
under the assumption that Angular analysis/diagnostics are only requested if
the program has no TypeScript-level errors. A result of this assumption is
that the incremental engine has not needed to resolve changes via its
dependency graph when the program contained broken imports, since broken
imports are a TypeScript error.
The Angular Language Service for Ivy is using the compiler as a backend, and
exercising its incremental compilation APIs without enforcing this
assumption. As a result, the Language Service has run into issues where
broken imports cause incremental compilation to fail and produce incorrect
results.
This commit introduces a mechanism within the compiler to keep track of
files for which dependency analysis has failed, and to always treat such
files as potentially affected by future incremental steps. This is tested
via the Language Service infrastructure to ensure that the compiler is doing
the right thing in the case of invalid imports.
PR Close#39923
Previously, if a component had an external template with a hard error, the
compiler would "forget" the link between that component and its NgModule.
Additionally, the NgModule would be marked as being in error, because the
template issue would prevent the compiler from registering the component
class as a component, so from the NgModule it would look like a declaration
of a non-directive/pipe class. As a combined result, the next incremental
step could fix the template error, but would not refresh diagnostics for the
NgModule, leading to an incrementality issue.
The various facets of this problem were fixed in prior commits. This commit
adds a test verifying the above case works now as expected.
PR Close#39923
To avoid overwhelming a user with secondary diagnostics that derive from a
"root cause" error, the compiler has the notion of a "poisoned" NgModule.
An NgModule becomes poisoned when its declaration contains semantic errors:
declarations which are not components or pipes, imports which are not other
NgModules, etc. An NgModule also becomes poisoned if it imports or exports
another poisoned NgModule.
Previously, the compiler tracked this poisoned status as an alternate state
for each scope. Either a correct scope could be produced, or the entire
scope would be set to a sentinel error value. This meant that the compiler
would not track any information about a scope that was determined to be in
error.
This method presents several issues:
1. The compiler is unable to support the language service and return results
when a component or its module scope is poisoned.
This is fine for compilation, since diagnostics will be produced showing the
error(s), but the language service needs to still work for incorrect code.
2. `getComponentScopes()` does not return components with a poisoned scope,
which interferes with resource tracking of incremental builds.
If the component isn't included in that list, then the NgModule for it will
not have its dependencies properly tracked, and this can cause future
incremental build steps to produce incorrect results.
This commit changes the tracking of poisoned module scopes to use a flag on
the scope itself, rather than a sentinel value that replaces the scope. This
means that the scope itself will still be tracked, even if it contains
semantic errors. A test is added to the language service which verifies that
poisoned scopes can still be used in template type-checking.
PR Close#39923
Previously, if a trait's analysis step resulted in diagnostics, the trait
would be considered "errored" and no further operations, including register,
would be performed. Effectively, this meant that the compiler would pretend
the class in question was actually undecorated.
However, this behavior is problematic for several reasons:
1. It leads to inaccurate diagnostics being reported downstream.
For example, if a component is put into the error state, for example due to
a template error, the NgModule which declares the component would produce a
diagnostic claiming that the declaration is neither a directive nor a pipe.
This happened because the compiler wouldn't register() the component trait,
so the component would not be recorded as actually being a directive.
2. It can cause incorrect behavior on incremental builds.
This bug is more complex, but the general issue is that if the compiler
fails to associate a component and its module, then incremental builds will
not correctly re-analyze the module when the component's template changes.
Failing to register the component as such is one link in the larger chain of
issues that result in these kinds of issues.
3. It lumps together diagnostics produced during analysis and resolve steps.
This is not causing issues currently as the dependency graph ensures the
right classes are re-analyzed when needed, instead of showing stale
diagnostics. However, the dependency graph was not intended to serve this
role, and could potentially be optimized in ways that would break this
functionality.
This commit removes the concept of an "errored" trait entirely from the
trait system. Instead, analyzed and resolved traits have corresponding (and
separate) diagnostics, in addition to potentially `null` analysis results.
Analysis (but not resolution) diagnostics are carried forward during
incremental build operations. Compilation (emit) is only performed when
a trait reaches the resolved state with no diagnostics.
This change is functionally different than before as the `register` step is
now performed even in the presence of analysis errors, as long as analysis
results are also produced. This fixes problem 1 above, and is part of the
larger solution to problem 2.
PR Close#39923
If the testcase has not specified that errors were expected, then any
errors that have occurred should be reported. These errors may have
prevented an output file from being generated, which resulted in hard
to debug test failures due to missing files.
PR Close#39862
This commit adds a few tests to verify that the `onDestroy` callbacks are invoked when `ComponentRef` instance
is destroyed and the logic is consistent between ViewEngine and Ivy.
PR Close#39876
In the new behavior Angular removes applications from the testability registry when the
root view gets destroyed. This eliminates a memory leak, because before that the
TestabilityRegistry holds references to HTML elements, thus they cannot be GCed.
PR Close#22106
PR Close#39876
The Language Service "find references" currently uses the
`ngtypecheck.ts` suffix to determine if a file is a shim file. Instead,
a better API would be to expose a method in the template type checker
that does this verification so that the LS does not have to "know" about
the typecheck suffix. This also fixes an issue (albeit unlikely) whereby a file
in the user's program that _actually_ is named with the `ngtypecheck.ts`
suffix would have been interpreted as a shim file.
PR Close#39768
This commit adds "find references" functionality to the Ivy integrated
language service. The basic approach is as follows:
1. Generate shims for all files to ensure we find references in shims
throughout the entire program
2. Determine if the position for the reference request is within a
template.
* Yes, it is in a template: Find which node in the template AST the
position refers to. Then find the position in the shim file for that
template node. Pass the shim file and position in the shim file along
to step 3.
* No, the request for references was made outside a template: Forward
the file and position to step 3.
3. (`getReferencesAtTypescriptPosition`): Call the native TypeScript LS
`getReferencesAtPosition`. For each reference that is in a shim file, map those
back to a template location, otherwise return it as-is.
PR Close#39768
There were two issues with the current TCB:
1. The logic for only wrapping the right hand side of the property write
if it was not already a parenthesized expression was incorrect. A
parenthesized expression could still have a trailing comment, and if
that were the case, that span comment would still be ambiguous, as explained
by the comment in the code before `wrapForTypeChecker`.
2. The right hand side of keyed writes was not wrapped in parens at all
PR Close#39768
In order to map the a safe property read's method access in the type check block
directly back to the property in the template source, we need to
include the `SafePropertyRead`'s `nameSpan` with the `ts.propertyAccess` for
the pipe's transform method.
Note that this is specifically relevant to the Language Service's "find
references" feature. As an example, with something like `{{a?.value}}`,
when calling "find references" on the 'value' we want the text
span of the reference to just be `value` rather than the entire source
`a?.value`.
PR Close#39768
In order to map the pipe's `transform` method in the type check block
directly back to the pipe name in the template source, we need to
include the `BindingPipe`'s `nameSpan` with the `ts.methodAccess` for
the pipe's transform method.
Note that this is specifically relevant to the Language Service's "find
references" feature. As an example, with something like `-2.5 | number:'1.0-0'`,,
when calling "find references" on the 'number' pipe we want the text
span of the reference to just be `number` rather than the entire binding
pipe's source `-2.5 | number:'1.0-0'`.
PR Close#39768
Fix a case where, if the parent class had already been patched, it would
not patch the child class. In addition to checking if the method is
defined in the prototype, and not inherited, it also does the same for
the unpatched method.
PR Close#39850
Previously, test descriptions used `latest` to refer to the most
recent/highest version. This was ambiguous, because `latest` can also
refer to the stable version of a package (e.g. see `@latest` npm tag).
This commit replaces `latest` with `highest` (or `highest for major`) to
reduce ambiguity.
Discussed in:
https://github.com/angular/angular/pull/39853#discussion_r531730317
PR Close#39853
Pete Bacon Darwin
Bjarki
Andrew Scott
George Kalpakas
Misko Hevery
Alexey Elin
Joey Perrott
arturovt
Alex Rickabaugh
cexbrayat
JoostK
Zach Arend
Keen Yee Liau
ayazhafiz
Jessica Janiuk
Alvaro
Trotyl
Kristiyan Kostadinov
Jeremy Elbourn
Andrew Kushnir
Eduardo Speroni