This commit fixes a regression introduced in PR 29692 where
the interpolate symbol in View Engine was improperly prefixed
with the ɵɵ that signifies private instructions for Ivy. It
resulted in interpolations of 10+ values not working correctly
in AOT mode. This commit removes the prefix.
PR Close#30243
Previously, `R3TestBedCompiler` was dynamically defining an
`@NgModule`-decorated `CompilerModule` class inside a method call.
Since ngcc only processes top-level classes, this class was not
transformed causing failures in unit tests (see #30121 for details).
This commit fixes it by using `compileNgModuleDefs()` directly (similar
to the fix in #30037).
Fixes#30121
PR Close#28530
Sometimes we need to override module resolution behaviour.
We do this by implementing the optional method `resolveModuleNames()`
on `CompilerHost`.
This commit ensures that we always try this method first before falling
back to the standard `ts.resolveModuleName`
PR Close#30017
Packages that do not follow APF may have the declaration files in the same
directory as one source format, typically ES5. This is problematic for ngcc,
as it needs to create a TypeScript program with all JavaScript sources of
an entry-point, whereas TypeScript's module resolution mechanism would have
resolved an internal module import to the external facing .d.ts declaration
file, instead of the JavaScript source file. This behavior results in the
program to be analysed being incomplete.
This commit introduces a custom compiler host that recognizes the above
scenario and rewires the resolution of a .d.ts declaration file to its
JavaScript counterpart, if applicable.
Fixes#29939
PR Close#30017
Ivy uses R3Injector, but we are currently pulling in both the StaticInjector
(View Engine injector) and the R3Injector when running with Ivy. This commit
adds an ivy switch so calling Injector.create() pulls in the correct
implementation of the injector depending on whether you are using VE or Ivy.
This saves us about 3KB in the bundle.
PR Close#30219
Previously, we were supporting injection flags for provider deps, but only
if they fit the format `new Optional()`. This commit fixes resolution of
provider deps to also support `Optional` (without the new). This keeps us
backwards compatible with what View Engine supported.
PR Close#30216
The `aio_monitoring_next` CircleCI job was disabled due to a failure in
[302254](https://circleci.com/gh/angular/angular/302254). It turned out
the failure was caused because the job happened to run after a change
had been merged into master and right before it was deployed to
https://next.angular.io/ causing the tests not to match the deployed
version.
This commit re-enables the job and moves it to a different time, when it
is less likely that PRs will be being merged (and thus reducing the risk
of a similar timming issue).
Fixes#30101
PR Close#30168
Stores the views that are part of a container directly on the `LContainer`, rather than maintaining a dedicated sub-array.
This PR resolves FW-1288.
PR Close#30179
Currently, we are not properly resolving forward refs when they appear
in deps for providers created with the useFactory strategy. This commit
wraps provider deps in the resolveForwardRef call so the tokens are
passed into the inject function as expected.
PR Close#30201
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
Currently the `static-query` migrations fails at the final step of
updating a query when the query already specifies options which
cannot be transformed easily. e.g. the options are computed through
a function call: `@ViewChild(..., getQueryOpts());` or `@ViewChild(..., myOptionsVar)`.
In these cases we technically could add additionally logic to update
the query options, but given that this is an edge-case and it's
potentially over-engineering the migration schematic, we just
always add a TODO for the timing and print out the determined
query timing in the console. The developer in that case just needs
to manually update the logic for the query options to contain the
printed query timing.
Potentially related to: https://github.com/angular/angular-cli/issues/14298
PR Close#30178
This PR changes the integration test to load language service the way it would be loaded in the editor.
If the language service is specified in tsconfig, it'd only be loaded for Angular projects.
Specifying it as `globalPlugins` loads it unconditionally whenever tsserver is brought up.
PR Close#30153
This is in preparation for more rigorous testing of external templates, since it'll work differently under the new tsserver plugin model.
PR Close#30128
This PR adds the implementation for `definitionAndBoundSpan` because
it's now preferred over `definition`. vscode would send this new request
for `Go to definition`. As part of this PR the implementation for
`definition` is refactored and simplified. Goldens for both methods are
checked in.
PR Close#30125
This commit introduces a new interface, which abstracts access
to the underlying `FileSystem`. There is initially one concrete
implementation, `NodeJsFileSystem`, which is simply wrapping the
`fs` library of NodeJs.
Going forward, we can provide a `MockFileSystem` for test, which
should allow us to stop using `mock-fs` for most of the unit tests.
We could also implement a `CachedFileSystem` that may improve the
performance of ngcc.
PR Close#29643
By passing a `pathMappings` configuration (a subset of the
`ts.CompilerOptions` interface), we can instuct ngcc to process
additional paths outside the `node_modules` folder.
PR Close#29643
When working out the dependencies between entry-points
ngcc must parse the import statements and then resolve the
import path to the actual file. This is complicated because module
resolution is not trivial.
Previously ngcc used the node.js `require.resolve`, with some
hacking to resolve modules. This change refactors the `DependencyHost`
to use a new custom `ModuleResolver`, which is optimized for this use
case.
Moreover, because we are in full control of the resolution,
we can support TS `paths` aliases, where not all imports come from
`node_modules`. This is the case in some CLI projects where there are
compiled libraries that are stored locally in a `dist` folder.
See //FW-1210.
PR Close#29643
Previously we completely ignored entry-points that had not been
compiled with Angular, since we do not need to compile them
with ngcc. But this makes it difficult to reason about dependencies
between entry-points that were compiled with Angular and those that
were not.
Now we do track these non-Angular compiled entry-points but they
are marked as `compiledByAngular: false`.
PR Close#29643
The test now attempts to compile an entry-point (@angular/common/http/testing)
that has a transient "private" dependency. A private dependency is one that is
only visible by looking at the compiled JS code, rather than the generated TS
typings files.
This proves that we can't rely on typings files alone for computing the
dependencies between entry-points.
PR Close#29643
The `Transformer` and `Renderer` classes do not
actually need a `sourcePath` value as by the time
they are doing their work we are only working directly
with full absolute paths.
PR Close#29643
I updated the payload size limits as well. There still seem to be size regressions in the framework,
but at least the polyfills now uses the evergreen build of zones so we shaved off a few KB there.
PR Close#30183
Introduces a new Bazel test that allows us to inspect
what source-files contribute to a given bundled file
and how much bytes they contribute to the bundle size.
Additionally the size-tracking rule groups the size
data by directories. This allows us to compare size
changes in the scope of directories. e.g. a lot of
files in a directory could increase slightly in size, but
in the directory scope the size change could be significant
and needs to be reported by the test target.
Resolves FW-1278
PR Close#30070
Disables the injectable pipe migration until we can decide whether this is the right solution for Ivy. Rolling it out properly will involve a more detailed plan and more changes like updating the styleguide, scaffolding schematics etc.
Context for the new `test-migrations.json`: since we use the `migrations.json` both for the real migrations and for tests, it doesn't allow us to disable a schematic, but continue running its tests. This change adds the test-specific file so that we can continue running the `injectable-pipe` tests, even though the schematic itself is disabled.
PR Close#30180
Currently the injectable pipe schematic generates invalid imports like `import import { Pipe, PipeTransform, Injectable } from '@angular/core'; from '@angular/core';`. The issue wasn't caught by the unit tests, because the invalid import still contains the valid one.
Fixes#30159.
PR Close#30170
Currently when working on Windows, it's not possible to accept a new
golden for a `symbol-extractor` Bazel test. This is because the generated
executable output from the `nodejs_binary` rule (without a macro) misses
a Windows executable wrapper that sets up the proper environment
variables for the runfiles. Causing the following failure on Windows:
```
>>>> FAIL: RUNFILES environment variable is not set. <<<<
```
PR Close#30127
This PR removes `tsserverlibrary` from rollup globals since the symbol
should not appear by the time rollup is invoked. `tsserverlibrary` is
used for types only, so the import statement should not be emitted by
tsc.
PR Close#30123
Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.
This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.
Fixes#30101
PR Close#30110