This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
The main logic of the `InheritDefinitionFeature` is to go through the prototype chain of a given Component and merge all Angular-specific information onto that Component def. The problem happens in case there is a Component in a hierarchy that also contains the `InheritDefinitionFeature` (i.e. it extends some other Component), so it inherits all Angular-specific information from its super class. As a result, the root Component may end up having duplicate information inherited from different Components in hierarchy.
Let's consider the following structure: `GrandChild` extends `Child` that extends `Base` and the `Base` class has a `HostListener`. In this scenario `GrandChild` and `Child` will have `InheritDefinitionFeature` included into the `features` list. The processing will happend in the following order:
- `Child` inherits `HostListener` from the `Base` class
- `GrandChild` inherits `HostListener` from the `Child` class
- since `Child` has a parent, `GrandChild` also inherits from the `Base` class
The result is that the `GrandChild` def has duplicated host listener, which is not correct.
This commit introduces additional logic that checks whether we came across a def that has `InheritDefinitionFeature` feature (which means that this def already inherited information from its super classes). If that's the case, we skip further fields-related inheritance logic, but keep going though the prototype chain to look for super classes that contain other features (like NgOnChanges), that we need to invoke for a given Component def.
PR Close#34244
Prior to this change, the ExpressionChangedAfterChecked error thrown in Ivy was missing useful information that was available in View Engine, specifically: missing property name for proprty bindings and also the content of the entire property interpolation (only a changed value was displayed) if one of expressions was changed unexpectedly. This commit improves the error message by including the mentioned information into the error text.
PR Close#34381
The ordering matters because we don't currently throw if multiple
configurations are provided (i.e. provider has *both* useExisting and
useFactory). We should actually throw an error in this case, but to
avoid another breaking change in v9, this PR simply aligns the Ivy
behavior with ViewEngine.
PR Close#34433
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
In ViewEngine we used to throw an error if we encountered an unknown element while rendering. We have this already for Ivy in AoT, but we didn't in JiT. These changes implement the error for JiT mode.
PR Close#33419
Prior to this commit, i18n logic which ensures that elements removed in a translation are also removed in DOM, didn't take into account the fact that elements may have local refs. As a result, remove operation failed, since there is no corresponding tNode found. This commit updates the logic to skip all local refs while going though the list of nodes to ensure that DOM matches elements present in translation.
PR Close#33415
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
Prior to this fix if a map-based class or style binding wrote
its values onto an elemenent, the internal styling context would
not register the binding if the initial value as a `NO_CHANGE`
value. This situation occurs if a directive takes control of the
`class` or `style` input values and then returns a `NO_CHANGE` value
if the initial value is empty.
This patch ensures that all bindings are always registered with the
`TStylingContext` data-structure even if their initial value is
an instance of `NO_CHANGE`.
PR Close#33236
Prior to this fix, all style/class bindings (e.g. `[style]` and
`[class.foo]`) would quietly update a binding value if and when the
current binding value changes during checkNoChanges.
With this patch, all styling instructions will properly check to see
if the value has changed during the second pass of detectChanges()
if checkNoChanges is active.
PR Close#33103
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
Prior to this commit, Ivy runtime asserted that a given element is an instance of a DOM node. These asserts may not be correct in case custom renderer is used, which operates objects with a shape different than DOM nodes. This commit updates the code to avoid the mentioned checks in case procedural renderer is used.
PR Close#33156
Prior to this patch, if a map-class binding is applied directly then
that value will be incorrectly provided a sanitizer even if there is no
sanitization present for an element.
PR Close#33154
This patch enables a styling debug instance (which is apart of the
`debugNode.styles` or `debugNode.classes` data structures) to expose
its context value so that it can be easily debugged.
PR Close#32856
Prior to this change, ng-reflect properties were not created in case an attribute was marked as translatable (for ex. `i18n-title`). This commit adds the logic to generate ng-reflect for such cases.
PR Close#32989
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Child component refresh must happen before executing the ViewQueryFn because
child components could insert a template from the host that contains the result
of the ViewQuery function (see related test added in this PR).
PR Close#32922
This patch changes the Ivy `DebugElement` code to always read style and
class values directly from the native element instead of reading them
through the styling contexts. The reason for this change is because Ivy
does not make use of a debug renderer and will therefore not have access
to any classes/styles applied directly through the renderer (unless it
reads the values directly from the element).
PR Close#32842
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
This patch fixes a bug where the map-based cursor moves too far and
skips intermediate values when the correct combination of single-prop
bindings and map-based bindings are used together.
PR Close#32774
This patch enables a styling debug instance (which is apart of the
`debugNode.styles` or `debugNode.classes` data structures) to expose
its context value so that it can be easily debugged.
PR Close#32753
Prior to this patch the `window.ng.getDebugNode` method would fail to
return the debug information for an element that is a host element to
a component.
PR Close#32780
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
Prior to this patch, each time `advance()` would run (or when a
templateFn or hostBindings code exits) then the core change detection
code would check to see whether the styling data needs to be reset. This
patch removes that functionality and places everything inside of the
scheduled styling exit function. This means that each time one or more
styling bindings run (even if the value hasn't changed) then an exit
function will be scheduled and that will do all the cleanup.
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
This is a refactoring that moves the source code around to provide a better
platform for adding the compile-time inlining.
1. Move the global side-effect import from the primary entry-point to a
secondary entry-point @angular/localize/init.
This has two benefits: first it allows the top level entry-point to
contain tree-shakable shareable code; second it gives the side-effect
import more of an "action" oriented name, which indicates that importing
it does something tangible
2. Move all the source code into the top src folder, and import the localize
related functions into the localize/init/index.ts entry-point.
This allows the different parts of the package to share code without
a proliferation of secondary entry-points (i.e. localize/utils).
3. Avoid publicly exporting any utilities at this time - the only public
API at this point are the global `$localize` function and the two runtime
helpers `loadTranslations()` and `clearTranslations()`.
This does not mean that we will not expose additional helpers for 3rd
party tooling in the future, but it avoid us preemptively exposing
something that we might want to change in the near future.
Notes:
It is not possible to have the `$localize` code in the same Bazel package
as the rest of the code. If we did this, then the bundled `@angular/localize/init`
entry-point code contains all of the helper code, even though most of it is not used.
Equally it is not possible to have the `$localize` types (i.e. `LocalizeFn`
and `TranslateFn`) defined in the `@angular/localize/init` entry-point because
these types are needed for the runtime code, which is inside the primary
entry-point. Importing them from `@angular/localize/init` would run the
side-effect.
The solution is to have a Bazel sub-package at `//packages/localize/src/localize`
which contains these types and the `$localize` function implementation.
The primary `//packages/localize` entry-point imports the types without
any side-effect.
The secondary `//packages/localize/init` entry-point imports the `$localize`
function and attaches it to the global scope as a side-effect, without
bringing with it all the other utility functions.
BREAKING CHANGES:
The entry-points have changed:
* To attach the `$localize` function to the global scope import from
`@angular/localize/init`. Previously it was `@angular/localize`.
* To access the `loadTranslations()` and `clearTranslations()` functions,
import from `@angular/localize`. Previously it was `@angular/localize/run_time`.
PR Close#32488
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Adds two acceptance tests to show a current difference in behavior between Ivy and VE.
A directive with a selector `.Titledir` matches an element with `class="titleDir"` in VE but not in Ivy.
Same thing for an attribute value.
PR Close#32548
Prior to this commit, the `previousOrParentTNode` was set to null after performing all operations within `refreshView` function. It's causing problems in more complex scenarios, for example when change detection is triggered during DI (see test added as a part of this commit). As a result, global state might be corrupted. This commit captures current value of `previousOrParentTNode` and restores it after `refreshView` call.
PR Close#32521
The `goog.getMsg()` function requires placeholder names to be camelCased.
This is not the case for `$localize`. Here placeholder names need
match what is serialized to translation files.
Specifically such placeholder names keep their casing but have all characters
that are not in `a-z`, `A-Z`, `0-9` and `_` converted to `_`.
PR Close#32509
Logs a warning instead of throwing when running into a binding to an unknown property in JIT mode. Since we aren't using a schema for the runtime validation anymore, this allows us to support browsers where properties are unsupported.
PR Close#32463
Prior to this commit, listeners order was not preserved in case we coalesce them to avoid triggering unnecessary change detection cycles. For performance reasons we were attaching listeners to existing events at head (always using first listener as an anchor), to avoid going through the list, thus breaking the order in which listeners are registered. In some scenarios this order might be important (for example with `ngModelChange` and `input` listeners), so this commit updates the logic to put new listeners at the end of the list. In order to avoid performance implications, we keep a pointer to the last listener in the list, so adding a new listener takes constant amount of time.
PR Close#32484
Fixes an issue where Ivy incorrectly inserts items in the beginning of an `ngFor`, if the `ngFor` is set on an `ng-container`. The issue comes from the fact that we choose the `ng-container` comment node as the anchor point before which to insert the content, however the node might be after any of the nodes inside the container. These changes switch to picking out the first node inside of the container instead.
PR Close#32324
Prior to this commit, complex expressions (that require additional statements to be generated) were handled incorrectly in case they were used in attributes annotated with i18n flags. The problem was caused by the fact that extra statements were not appended to the temporary vars block, so they were missing in generated code. This commit updated the logic to use the `convertPropertyBinding`, which contains the necessary code to append extra statements. The `convertExpressionBinding` function was removed as it duplicates the `convertPropertyBinding` one (for the most part) and is no longer used.
PR Close#32309
Prior to this fix if a `NO_CHANGE` value was assigned to a binding, or
an interpolation value rendererd a `NO_CHANGE` value, then the presence
of that value would cause the internal counter index values to not
increment properly. This patch ensures that this doesn't happen and
that the counter/bitmask values update accordingly.
PR Close#32143
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
Extend the vocabulary of the `providedIn` to also include `'platform'` and `'any'`` scope.
```
@Injectable({
providedId: 'platform', // tree shakable injector for platform injector
})
class MyService {...}
```
PR Close#32154
Prior to this change, the `BINDING_INDEX` of a given lView was reset after processing a template. However change detection can be triggered as a result of View queries processing, thus leading to subsequent `refreshView` call (and executing a template), which in turn operates with the binding index that is not reset after the previous `refreshView` call. This commit updates the logic to reset binding index before we execute a template, so binding index is correct for instructions inside template function.
PR Close#32201
In VE the `Sanitizer` is always available in `BrowserModule` because the VE retrieves it using injection.
In Ivy the injection is optional and we have instructions instead of component definition arrays. The implication of this is that in Ivy the instructions can pull in the sanitizer only when they are working with a property which is known to be unsafe. Because the Injection is optional this works even if no Sanitizer is present. So in Ivy we first use the sanitizer which is pulled in by the instruction, unless one is available through the `Injector` then we use that one instead.
This PR does few things:
1) It makes `Sanitizer` optional in Ivy.
2) It makes `DomSanitizer` tree shakable.
3) It aligns the semantics of Ivy `Sanitizer` with that of the Ivy sanitization rules.
4) It refactors `DomSanitizer` to use same functions as Ivy sanitization for consistency.
PR Close#31934
Similar to interpolation, we do not want to completely remove whitespace
nodes that are siblings of an expansion.
For example, the following template
```html
<div>
<strong>items left<strong> {count, plural, =1 {item} other {items}}
</div>
```
was being collapsed to
```html
<div><strong>items left<strong>{count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left4
```
instead it should be collapsed to
```html
<div><strong>items left<strong> {count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left 4
```
---
**Analysis of the code and manual testing has shown that this does not cause
the generated ids to change, so there is no breaking change here.**
PR Close#31962
Fixes Ivy's directive matching not capturing attribute selectors when there is one class binding, one style binding and a regular binding that precede the attribute that would match the directive. The issue appears to come from the fact that we weren't skipping over style bindings correctly which was throwing the loop off not to go into `bindingsMode` and to skip some of the bindings when matching.
PR Close#31942
Prior to this commit, the `schemas` configuration was applied to top-level view only. That leads to problems when using unknown props with elements inside nested views (for example generated as a result of *ngIf). This commit passes `schemas` information down to nested views to make sure that all the checks are consistent.
PR Close#31913
In `BrowserModule` the value of `LOCALE_ID` is defined in the `APPLICATION_MODULE_PROVIDERS` after `APP_INITIALIZER` has run.
This PR ensures that `LOCALE_ID` is also set for ivy at the same moment which allows the application to fetch the locale from a backend (for example).
Fixes#31465
FW-1436 #resolve
PR Close#31566
Fixes Ivy throwing an error when something is passed in as a `forwardRef` into `@Injectable`'s `useClass` option. The error was being thrown, because we were trying to get the provider factory off of the wrapper function, rather than the value itself.
This PR resolves FW-1335.
PR Close#30532
This commit fixes a bug where we assumed all dynamically created
components would have tag-name selectors, so we passed through the
"tag name" to the renderer as the first index of the selector. For
components with attribute selectors, the tag name would be "", so
the renderer would try to create an element with tag name "" and
throw. Now we default to a "div" element the same way that View
Engine did.
Closes#31785
PR Close#31812
The way the `ComponentFactory.create` is set up at the moment is that if a `rootSelectorOrNode` is passed in, the root context will be injected instead of creating dedicated one for the component. As far as I can tell, there doesn't seem to be a reason to do this and nothing seems to break because of it. These changes switch to always create the root context.
PR Close#31661
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit fixes a bug where ICU expressions inserted into ngTemplateOutlets
that are inside ngFor blocks would throw an error. We were assuming in view
insertion code that text nodes would always exist by the time a view\`s
creation block had executed. This is not true for text nodes created dynamically
by ICUs because this happens in the update block (in `i18nApply`).
This change ensures such dynamically created nodes are skipped when encountered
too early (as they will be attached later by i18n code anyway).
PR Close#31789
We currently have a handwritten version of the Ivy directive def for NgClass so
we can switch between Ivy and View Engine behavior. This generated code needs to
be kept up-to-date with what the Ivy compiler generates.
PR 30742 recently changed `classMap` such that it now requires allocation of
host binding slots. This means that the `allocHostVars()` function must be
called in the NgClass directive def to match compiler output, but the
handwritten directive def was not updated. This caused a bug where NgClass
was inappropriately overwriting data for other directives because space was
not allocated for its values.
PR Close#31788
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
Miško Hevery
Andrew Scott
Kristiyan Kostadinov
Greg Magolan
Pawel Kozlowski
Paul Gschwendtner
atscott
Andrew Kushnir
Pete Bacon Darwin
Kara Erickson
horn
JoostK
JiaLiPassion
Matias Niemelä
Alex Rickabaugh
cexbrayat
Carlos Ortiz García
Olivier Combe