We recently added a new folder for common bazel utilities
to `dev-infra`. The `ng_rollup_bundle` rule relies on an
utility that is provided by this `bazel/` folder.
Unfortunately though it looks like this folder is currently
not included in the NPM package, so that the `ng_rollup_bundle`
rule does not work as expected. This commit fixes that by
including the bazel utilities in the NPM package.
PR Close#37891
The merge script uses `git cherry-pick` for both the API merge strategy
and the autosquash strategy. It uses cherry-pick to push commits to
different target branches (e.g. into the `10.0.x` branch).
Those commits never point to the commits that landed in the primary
Github branch though. For the autosquash strategy the pull request number
is always included, so there is a way to go back to the source. On the other
hand though, for commits cherry-picked in the API merge strategy, the
pull request number might not always be included (due to Github's
implementation of the rebase merge method).
e.g.
27f52711c0
For those cases we'd want to link the cherry-picked commits to the
original commits so that the corresponding PR is easier to track
down. This is not needed for the autosquash strategy (as outlined
before), but it would have been good for consistency. Unfortunately
though this would rather complicate the strategy as the autosquash
strategy cherry-picks directly from the PR head, so the SHAs that
are used in the primary branch are not known.
PR Close#37889
This feature will allow us to exclude certain commits from the 100 chars minBodyLength requirement for commit
messages which is hard to satisfy for commits that make trivial changes (e.g. fixing typos in docs or comments).
PR Close#37764
We recently added OAuth scope checking to the dev-infra Git client
and started leveraging it for the merge script. We set the `repo` scope
as required for running the merge script. We can loosen this requirement
as in the Angular org where the script is consumed, only pull requests on
public repositories are merged through the script.
This should help with reducing the risk with compromised tokens as no
access had to be granted on `repo:invite`, `repo_deployment` etc.
PR Close#37718
Scripts provided in the `ng-dev` command might use local `git`
commands. For such scripts, we keep track of the branch that
has been checked out before the command has been invoked.
We do this so that we can later (upon command completion)
restore back to the original branch. We do not want to
leave the Git repository in a dirty state.
It looks like this logic currently only deals with branches
but does not work properly when a command is invoked from
a detached head. We can make it work by just checking out
the previous revision (if no branch is checked out).
PR Close#37737
* add a param called ng_assets to the component_benchmark macro to allow static assets to be provided to the base angular app, not just through the ts_devserver
PR Close#37695
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
GitClient now uses GithubClient for github API interactions. GithubClient is
a class which extends Octokit and provides a member which allows for GraphQL
requests against the Github GraphQL api, as well as providing convenience methods
for common/repeated Github API requests.
PR Close#37593
Cleans up the dependencies used in the shared dev-infra package
configuration. With the recent benchmarking utilities that have
been added, a lot of peer dependencies have been added.
We decided that we don't want to list every used dependencies as
peer dependency as that could result in unnecessary churn/noise
for consumers of the dev-infra package. Additionally, not all parts
of the dev-infra package are necessarily used.
Due to this, we want to apply the following rules for the package
dependencies:
1. If a dependency is only used in a shipped Bazel macro/rule that can be
optionally consumed, omit it from `package.json`. Bazel reports the
missing dependency on its own, so we want to avoid adding it to the
package json file.
2. Otherwise, if the dependency is large and commonly used (like
buildifier), add it to the `peerDependencies`. If not, add it
to the dependencies that are always brought in. We consider it
as acceptable to bring in a few small dependencies that might not
be used or not. Making all of those option would complicate the
use of the dev-infra package.
ds
PR Close#37594
We added a new dependency on `fs-extra` to the dev-infra package. We can
remove this dependency and replace it with `shelljs` that is extensively
used in other places already.
The motiviation is that we can reduce dependencies needed for
for consumption of the shared dev-infra package.
PR Close#37594
Adds support for a caretaker note label to the merge script.
Whenever a configured label is applied, the merge script will
not merge automatically, but instead prompt first in order
to ensure that the caretaker paid attention to the manual
caretaker note on the PR. This helps if a PR needs special
attention.
PR Close#37595
Adding in a `#` prepended to each PR number in the list of conflicting PRs
found by the discover-new-conflicts script will allow for users to copy
paste the output from the script into a github comment and have the PRs
automatically link.
PR Close#37556
Close#35157
In the current version of zone.js, zone.js uses it's own package format, and it is not following the rule
of Angualr package format(APF), so it is not easily to be consumed by Angular CLI or other bundle tools.
For example, zone.js npm package has two bundles,
1. zone.js/dist/zone.js, this is a `es5` bundle.
2. zone.js/dist/zone-evergreen.js, this is a `es2015` bundle.
And Angular CLI has to add some hard-coding code to handle this case, o5376a8b139/packages/schematics/angular/application/files/src/polyfills.ts.template (L55-L58)
This PR upgrade zone.js npm package format to follow APF rule, https://docs.google.com/document/d/1CZC2rcpxffTDfRDs6p1cfbmKNLA6x5O-NtkJglDaBVs/edit#heading=h.k0mh3o8u5hx
The updated points are:
1. in package.json, update all bundle related properties
```
"main": "./bundles/zone.umd.js",
"module": "./fesm2015/zone.js",
"es2015": "./fesm2015/zone.js",
"fesm2015": "./fesm2015/zone.js",
```
2. re-organize dist folder, for example for `zone.js` bundle, now we have
```
dist/
bundles/
zone.js // this is the es5 bundle
fesm2015/
zone.js // this is the es2015 bundle (in the old version is `zone-evergreen.js`)
```
3. have several sub-packages.
1. `zone-testing`, provide zone-testing bundles include zone.js and testing libraries
2. `zone-node`, provide zone.js implemention for NodeJS
3. `zone-mix`, provide zone.js patches for both Browser and NodeJS
All those sub-packages will have their own `package.json` and the bundle will reference `bundles(es5)` and `fesm2015(es2015)`.
4. keep backward compatibility, still keep the `zone.js/dist` folder, and all bundles will be redirected to `zone.js/bundles` or `zone.js/fesm2015` folders.
PR Close#36540
Looks like we broke the `hasLocalChanges` check in the git client
when we moved it over from the merge script. The problem is that
we are using `git` in the first argument of `git.run`. That
means that we under-the-hood run `git git <..>`.
This commit fixes that, but also switches to a better variant
for ensuring no local changes because it exits with non-zero
when there are local changes.
PR Close#37489
The dev-infra rebase PR script currently does not work due to
the following issues:
1. The push refspec is incorrect. It refers to the `base` of the PR, and
not to the `head` of the PR.
2. The push `--force-with-lease` option does not work in a detached head
as no remote-tracking branch is set up.
PR Close#37489
We recently moved over the git client from the merge script to the
common dev-infra utils. This made specifying a token optional, but
it looks like the logic for sanitizing messages doesn't account
for that, and we currently add `<TOKEN>` between every message
character. e.g.
```
Executing: git <TOKEN>g<TOKEN>i<TOKEN>t<TOKEN>
<TOKEN>s<TOKEN>t<TOKEN>a<TOKEN>t<TOKEN>u<TOKEN>s<TOKEN>
```
PR Close#37489
Historically we have had a pullapprove group `fallback` which acted as
a catch all for files which did not match any other groups. This
group assigned reviews to IgorMinar, however it was not apparent that
this group was assigned. This change removes this assignment. This
group as active should always coincide with failures of the pullapprove
verification script. We continue to have this group as a secondary test
ensuring all files in the repo are captured by the pullapprove config.
PR Close#36456
There is an `exec()` helper provided by `utils/shelljs.ts`, which is a
wrapper around ShellJS' `exec()` with some default options (currently
`silent: true`). The intention is to avoid having to pass these options
to every invocation of the `exec()` function.
This commit updates all code inside `dev-infra/` to use this helper
whenever possible).
NOTE: For simplicity, the `utils/shelljs` helper does not support some
of the less common call signatures of the original `exec()`
helper, so in some cases we still need to use the original.
PR Close#37444
Clean up pullapprove tooling to use newly created common utils.
Additionally, use newly created logging levels rather than
verbose flagging.
PR Close#37338
We recently added a better reporting mechanism for oauth tokens
in the dev-infra git util. Unfortunately the logic broke as part
of addressing PR review feedback. Right now, always the empty
promise from `oauthScopes` will be used as `getAuthScopes` considers
it as the already-requested API value. This is not the case as
the default promise is also truthy. We should just fix this by making
the property nullable.
PR Close#37439
Adds an assertion that the provided TOKEN has OAuth scope permissions for `repo`
as this is required for all merge attempts.
On failure, provides detailed error message with remediation steps for the user.
PR Close#37421
Rename bazel workspace from npm_dev_infra to npm_angular_dev_infra_private to make it clear that this package is private to angular.
Change driver-utilities module_name to match the new bazel workspace name.
Correct a comment by rewording it from "deployed version" to "published version".
Fix merge conflicts in tmpl-package.json
Make "//packages/bazel/src:esm5.bzl" replacement more generalized so that importing from "//packages/bazel" works.
Deleted "dev_infra/*" path from modules/benchmarks tsconfig.
Moved //dev-infra/benchmark/browsers to //dev-infra/browsers.
PR Close#36800
Migrate to using .ng-dev directory for ng-dev configuration to better
allow management of the configuration using multiple files. The
intention is to prevent the config file from becoming unruly.
PR Close#37142
Migrate the release tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the ts-circular-dependencies tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the merge tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the pullapprove tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the rebase tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the discover-new-conflicts tool in ng-dev to use new logging system
rather than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the commit-message tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the formatting tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Adds .group and .groupEnd functions to each of the logging functions
to allow creating groups in the logged output. Additionally removes
the color parameter from logging functions, in favor of the color
being applied to the string at the call site.
PR Close#37232
The components repo and framework repository follow the same patch
branch concept. We should be able to share a script for determining
these merge branches.
Additonally the logic has been improved compared to the old merge script because
we no longer consult `git ls-remote` unless really needed. Currently,
`git ls-remote` is always consulted, even though not necessarily needed.
This can slow down the merge script and the caretaker process when a
couple of PRs are merged (personally saw around ~4 seconds per merge).
Additionally, the new logic is more strict and will ensure (in most
cases) that no wrong patch/minor branch is determined. Previously,
the script just used the lexicographically greatest patch branch.
This _could_ be wrong when a new patch branch has been created too
early, or by accident.
PR Close#37217
We recently added support for automatic registration of `ts-node`
when the dev-infra configuration is loaded.
In addition to registering ts-node, we should also ensure that the
`commonjs` module is set up. By default, `ts-node` would use ES module
imports that are not supported by default in NodeJS.
PR Close#37217
Creates common logging functions at different levels. Allows for providing
logging statements which are actually printed to the console based on the
LOG_LEVEL environment variable.
PR Close#37192
`ts-node` is now an optional peer dependency of the shared dev-infra
package. Whenever a `ng-dev` command runs, and a TypeScript-based
configuration file exists, `ts-node` is set up if available.
That allows consumers of the package (as the components repo) to more
conveniently use a TypeScript-based configuration for dev-infra.
Currently, commands would need to be proxied through `ts-node`
which rather complicates the setup:
```
NG_DEV_COMMAND="ts-node ./node_modules/@angular/dev-infra-private/cli.js"
```
I'm thinking that it should be best-practice to use TypeScript for
writing the configuration files. Given that the tool is used primarily
in Angular projects (for which most sources are TypeScript), this should
be acceptable.
PR Close#37196
Creates a tool in ng-dev which rebases a PR automatically and pushes
the rebase commits back to the PR. This is meant to be a replacement
to the local merge script currently in the repo and currently has
feature parity.
PR Close#37055
As mentioned in the previous commit, the autosquash strategy has
not been used in the components repo, so we could easily regress.
After thorough manual testing of the autosquash strategy again,
now that the merge script will be moved to framework, it came
to mind that there is a bug with the base revision in the
autosquash merge strategy. The problem is that the base revision
of a given PR is relying on the amount of commits in a PR.
This is prone to error because the amount of commits could easily
change in the autosquash merge strategy, because fixup or squash
commits will be collapsed. Basically invalidating the base revision.
To fix this, we fixate the base revision by determining the actual
SHA. This one is guaranteed to not change after the autosquash rebase.
The current merge script in framework fixates the revision by creating
a separate branch, but there is no benefit in that, compared to just
using an explicit SHA that doesn't need to be cleaned up..
PR Close#37138
The components repo does not use the autosquash merge strategy, so
recent changes to that seem to broke the autosquash strategy.
Since we don't run the rebase in interactive mode, the `--autosquash`
flag has no effect. This is by design in Git. We can make it work by
setting the git sequence editor to `true` so that the rebase seems
like an interactive one to Git, while it isn't one for the user.
This matches conceptually with the merge script currently used in
framework. The only difference is that we allow a real interactive
rebase if the `commit message fixup` label is applied. This allows
commit message modifications (and others) if needed.
PR Close#37138
Integrates the merge script into the `ng-dev` CLI. The goal is that
caretakers can run the same command across repositories to merge a pull
request. The command is as followed: `yarn ng-dev pr merge <number>`.
PR Close#37138
Moves the merge script from the components repository over
to the shared dev-infra package. The merge script has been
orginally built for all Angular repositories, but we just
kept it in the components repo temporarily to test it.
Since everything went well on the components side, we now
move the script over and integrate it into the dev-infra package.
PR Close#37138
Creates a tool in ng-dev to determine the PRs which become conflicted
by merging a specified PR. Often the question is brought up of how
many PRs require a rebase as a result of a change. This script allows
to determine this impact.
PR Close#37051
Adds the gitub configuration to the ng-dev configuration. This github
configuration provides information needed for making API requests to
github. Upcoming tooling related PRs will require these API requests
being possible.
PR Close#37097
Adds a gitub object to the common configuration for ng-dev. This github
configuration provides information needed for making API requests to
github.
PR Close#37097
Release commits do not require a commit body as the context, usually
provided in commit body, is already available in the process of
releasing. No additional value is gained from adding a body message
on these commits.
PR Close#37110
Introduces infrastructure to validate configuration of the ng-dev
command at run time. Allowing for errors to be returned to the
user running the command.
PR Close#37049
As per our discussion in the dev-infra sync meeting, we don't want
to have all dependencies show up as peer dependencies. Instead, we
only want to have larger dependencies such as `typescript` or buildifier
as peer dependencies. Tslib is also included for the sake of it being
generally a peer dependency of all Angular framework packages.
The rationale is that Yarn is smart enough to collapse packages
if all satisfy a given range. This means that we don't necessarily
need to have all dependencies as peer dependencies. The initial
idea was to keep all dependencies as peer dependencies so that
we have control over duplication of packages as downloading multiple
packages w/ different versions impacts local dev, CI and caches.
At the same time though, we don't want to bother with setting
up peer dependencies all the time. Not every consumer of the
shared dev-infra package would like to manually specify `yaml`
or `multimatch` etc. in the project `package.json`. Hence we
decided to go with a hybrid approach where only more impactful
dependencies are peer dependencies, and other smaller ones can
be standard depdencies that are usually collapsed by Yarn anyway.
Also this commit removes tslib from build targets that don't
rely on it.
PR Close#36980
Previously ng-dev loaded the config through a javascript file, this
change allows for the loaded file to be either javascript or
typescript. This enables configurations to be written with type
safety.
PR Close#37017
Migrating to a js file for providing a configuration allows for more
extensive configuration at run time. This allows for configs to include
logic and move beyond static values found in JSON files.
PR Close#36918
Migrates away from inline searching for files and running buildifier
directly, instead using ng-dev for formatting. Additionally, provides
a deprecation message for any usages of the previous commands.
PR Close#36842
In an effort to centralize formatting and linting enforcement into one
location, buildifier is being added as a formatter for ng-dev's format
command. Allowing for format enforcement for all .bzl, .bazel, WORKSPACE
and BUILD files.
PR Close#36842
Create a common environment stamping script in the ng-dev tooling
as to be used in common release tasks. This is the first step in
consolidating pieces of the release scripting process into a single
location to develop a release tool.
PR Close#36844
Previously we used gulp to run our formatter, currently clang-format,
across our repository. This new tool within ng-dev allows us to
migrate away from our gulp based solution as our gulp solution had
issue with memory pressure and would cause OOM errors with too large
of change sets.
PR Close#36726
* Set up dev-infra's :npm_package to also contain benchmarking suite
* Add benchmarking deps to dev-infra's package.json
* Add a bazel workspace to dev-infra's package.json. This is so that when a
project wants to use dev-infra's code and macros, they can just import the
macros from their node_modules instead of loading it separately
PR Close#36434
* Move tools/brotli-cli, tools/browsers, tools/components,
tools/ng_rollup_bundle, and modules/e2e_util to dev-infra/benchmarking
* Fix imports and references to moved folders and files
* Set up BUILD.bazel files for moved folders so they can be packaged with
dev-infra's :npm_package
PR Close#36434
Enforces a requirement that all PR commit messages contain a body
of at least 100 characters. This is meant to encourage commits
within the repo to be more descriptive of each change.
PR Close#36632
Previously, the commit message body regex only matched the first line
of the body. This change corrects the regex to match the entire line.
PR Close#36632
Currently, when verifying our pullapprove configuration, we don't
respect modifications to the set of files in a condition.
e.g. It's not possible to do the following:
```
contains_any_globs(files.exclude(...), [
```
This prevents us from having codeowner groups which match a directory,
but want to filter out specific sub directories. For example, `fw-core`
matches all files in the core package. We want to exclude the schematics
from that glob. Usually we do this by another exclude condition.
This has a *significant* downside though. It means that fw-core will not
be requested if a PR changes schematic code, _and_ actual fw-core code.
To support these conditions, the pullapprove verification tool is
refactored, so that it no longer uses Regular expressions for parsing,
but rather evaluates the code through a dynamic function. This is
possible since the conditions are written in simple Python that can
be run in NodeJS too (with small modifications/transformations).
PR Close#36661
This commit fixes an issue where adding `fixup` commits was triggering a lint error. The problem was caused by the fact that we used the entire message body while checking whether `fixup` commit has a corresponding "parent" commit in a range. This issue was found after enforcing a check that exits the process if there is an invalid commit message found (4341743b4a).
PR Close#36733
Currently the `commit-message` validation script does not exit
with a non-zero exit code if the commit message validation failed.
This means that invalid commit messages are currently not
causing CI to be red. See: https://circleci.com/gh/angular/angular/686008
PR Close#36723
Previously, the `pre-commit-validate` command (used in the `commit-msg`
git hook) assumed that the commit message was stored in
`.git/COMMIT_EDITMSG` file. This is usually true, but not when using
[git worktrees](https://git-scm.com/docs/git-worktree), where `.git` is
a file containing the path to the actual git directory.
This commit fixes it by taking advantage of the fact that git passes the
actual path of the file holding the commit message to the `commit-msg`
hook and husky exposes the arguments passed by git as
`$HUSKY_GIT_PARAMS`.
NOTE:
We cannot use the environment variable directly in the `commit-msg` hook
command, because environment variables need to be referenced differently
on Windows (`%VAR_NAME%`) vs macOS/Linux (`$VAR_NAME`). Instead, we pass
the name of the environment variable and the validation script reads the
variable's value off of `process.env`.
PR Close#36507
Currently the golden output of the circular-deps tool is purely
based on the order of source files passed to the tool, and on the
amount of imports inside source files.
This is actually resulting in deterministic output as running
the tool multiple times without any changes to source files,
results in the same output.
Though it seems like the tool is too strict and we can avoid
unnecessary golden changes if:
1. A source file that is part of a cycle is imported earlier (in terms
of how the analyzer visits them). This could result in the cycle path
starting with a different source file.
2. Source files which are not part of a cycle are imported earlier
(in terms of how the analyzer visits them). This could result in moved
items in the golden if re-approved (even though the cycles remain the same)
To fix this, we normalize the cycle path array that serves as
serializable data structure for the text-based goldens. Since
the paths represents a cycle, the path can be shifted in a
deterministic way so that cycles don't change unnecessarily
in the golden, and to simplify comparison of cycles.
Additionally, we sort the cycles in a deterministic way so
that the golden doesn't change unnecessarily (as explained above).
PR Close#36505
Prior to this change we manage a local version of commit message validation
in addition to the commit message validation tool contained in the ng-dev
tooling. By adding the ability to validate a range of commit messages
together, the remaining piece of commit message validation that is in the
local version is replicated.
We use both commands provided by the `ng-dev commit-message` tooling:
- pre-commit-validate: Set to automatically run on an git hook to validate
commits as they are created locally.
- validate-range: Run by CI for every PR, testing that all of the commits
added by the PR are valid when considered together. Ensuring that all
fixups are matched to another commit in the change.
PR Close#36172
For better overview of modules that cannot be resolved in the
`ts-circular-deps` tool, the warnings are now sorted.
Additionally, an empty line between fixed and new circular dependencies
is now printed. That should slightly help with distinguishing.
PR Close#36361
Creates a standard model for CLI commands provided by ng-dev.
Allows for us to have any of the tools/scripts extend to be
included in the ng-dev command, or be standalone using the same
yargs parser.
PR Close#36326
Pullapprove as added a few new features to allow for us to better
execute our expectation for global approvals. We need to allow for
an expectation that our global approver groups are not in the list
of approved groups. Additionally, since approval groups apply to
all files in the repo, the global approval groups also do not have
conditions defined for them, which means pullapprove verification
need to allow for no conditions need to be defined.
PR Close#36324
$(location) is not recommended in the bazel docs as depending on context it will either return the value of $(execpath) or $(rootpath). rules_nodejs now supports $(rootpath) and $(execpath) in templated_args of nodejs_binary.
PR Close#36308
The `dev-infra` scripts were added to the list of sources that should be verified with clang (b07b6edc2a), but the Pullapprove-related scripts that were merged before (83e4a76afa) doesn't pass these checks. This commit updates a couple scripts to have a proper formatting.
PR Close#36287
Currently the `ts-circular-deps` tool uses a hard-coded module resolver
that only works in the `angular/angular` repository.
If the tool is consumed in other repositories through the shared
dev-infra package, the module resolution won't work, and a few
resolvable imports (usually cross-entry-points) are accidentally
skipped. For each test, the resolution might differ, so tests can
now configure their module resolution in a configuration file.
Note that we intentionally don't rely on tsconfig's for module
resolution as parsing their mappings rather complicates the
circular dependency tool. Additionally, not every test has a
corresponding tsconfig file.
Also, hard-coding mappings to `@angular/*` while accepting a
path to the packages folder would work, but it would mean
that the circular deps tool is no longer self-contained. Rather,
and also for better flexibility, a custom resolver should be
specified.
PR Close#36226
Changes the positional params for the circular deps tooling to
use camelCase as it requires being defined in camelCase while
in strict mode. Additionally, remove the `version()` call as
the boolean arguement does not exist in current versions and
throws errors on execution.
PR Close#36165
to run ts-circular-deps via installed node_modules, we needed to set
the hashbang of the script to be a node environment, and discover the
project directory based on where the script is run rather than the
scripts file location.
PR Close#36165
Sets up a golden file for the TypeScript circular dependencies for
source files inside of the `packages/` folder.
Also sets up the appropriate Yarn shorthand scripts, and a codeowner
group that is soley responsible for verifying changes to the golden.
PR Close#35647
The dev-infra package currently uses rollup for packaging. This has been
done initially as a way to workaround manifest paths being used in the
AMD JavaScript output.
The actual solution to this problem is setting module names that match
the `package.json` name. This ensures that the package can be consumed
correctly in Bazel, and through NPM. This allows us to get rid of the
rollup bundling, and we don't need to hard-code which dependencies
should be external or included.
Additionally, tools that are part of `dev-infra` can now specify
their external dependencies simply in the `package.json`. To reduce
version duplication, and out-of-sync versions, a new genrule has been
created that syncs the versions with the top-level project
`package.json`.
PR Close#35647
Create a common config file loading utility function and the
necessary util directory. This util directory can provide common
utility functions for usage inside of the dev-infra package.
PR Close#36091
Creates the scaffolding for an @angular/dev-infra-private package
which will not be published to npm but will be pushed to
https://github.com/angular/dev-infra-private-builds repo for each
commit to master.
The contents of this npm package will then be depended on via
package.json dependency for angular/angular angular/angular-cli and
angular/components.
PR Close#35862
Paul Gschwendtner
Igor Minar
Wagner Maciel
Joey Perrott
JiaLiPassion
Greg Magolan
George Kalpakas
Andrew Kushnir
Joey Perrott