Moves the circular deps golden for packages into a subfolder of goldens,
`/goldens/circular-deps/` to more easily target the files for
ownership.
PR Close#36630
Bumping the version of benchpress as a new version needs to be released
as part of the effort to set up more benchmarking accross the
angular/angular and angular/components repos.
PR Close#36457
Previously, we only displayed the new `$localize` id, which is not
currently what most people have in their translation files.
Until people migrate to the new message id system it is confusing
not to display the legacy ids.
PR Close#36761
When module overrides (via `TestBed.overrideModule`) are present, it might affect all modules that import (even transitively) an overridden one. For all affected modules we need to recalculate their scopes for a given test run and restore original scopes at the end. Prior to this change, we were recalculating module scopes only for components that are used in a test, without taking into account module hierarchy. This commit updates Ivy TestBed logic to calculate all potentially affected modules are reset cached scopes information for them (so that scopes are recalculated as needed).
Resolves#36619.
PR Close#36649
Prior to this commit unbound attributes were treated as possible inputs to structural directives. Since structural directives can only accepts inputs defined using microsyntax expression (e.g. `<div *dir="exp">`), such unbound attributes should not be considered as inputs. This commit aligns Ivy and View Engine behavior and avoids using unbound attributes as inputs to structural directives.
PR Close#36441
Based on the migration guide, provided classes which don't have
either `@Injectable`, `@Directive`, `@Component` or `@Pipe` need
to be migrated.
This is not correct as provided classes with an `@NgModule` also
have a factory function that can be read by the r3 injector. It's
unclear in which cases the `@NgModule` decorator is used for
provided classes, but this scenario has been reported.
Either we fix this in the migration, or we make sure to report
this as unsupported in the Ivy compiler.
Fixes#35700.
PR Close#36369
The cached file-system was implemented to speed up ngcc
processing, but in reality most files are not accessed many times
and there is no noticeable degradation in speed by removing it.
Benchmarking `ngcc -l debug` for AIO on a local machine
gave a range of 196-236 seconds with the cache and 197-224
seconds without the cache.
Moreover, when running in parallel mode, ngcc has a separate
file cache for each process. This results in excess memory usage.
Notably the master process, which only does analysis of entry-points
holds on to up to 500Mb for AIO when using the cache compared to
only around 30Mb when not using the cache.
Finally, the file-system cache being incorrectly primed with file
contents before being processed has been the cause of a number
of bugs. For example https://github.com/angular/angular-cli/issues/16860#issuecomment-614694269.
PR Close#36687
The flag that determines whether something should be able to inject from `viewProviders` is opt-out and the pipes weren't opted out, resulting in them being able to see the viewProviders if they're placed on a component host node.
Fixes#36146.
PR Close#36512
This commit fixes how the language service evaluates the compatibility
of types to work with arbitrary union types. As a result, compatibility
checks are now more strict and can catch similarities or differences
more clearly.
```
number|string == string|null // OK
number|string == number // OK
number|string == null // not comparable
number == string // not comparable
```
Using Ivy as a backend should provide these diagnoses for free, but we
can backfill them for now.
Closes https://github.com/angular/vscode-ng-language-service/issues/723
PR Close#36529
The change in e041ac6f0d
to support sending unlocker process output to the main ngcc
console output prevents messages require that the main process
relinquishes the event-loop to allow the `stdout.on()` handler to
run. This results in none of the messages being written when ngcc
is run in `--no-async` mode, and some messages failing to be
written if the main process is killed (e.g. ctrl-C).
It appears that the problem with Windows and detached processes
is known - see https://github.com/nodejs/node/issues/3596#issuecomment-250890218.
But in the meantime, this commit is a workaround, where non-Windows
`inherit` the main process `stdout` while on Windows it reverts
to the async handler approach, which is better than nothing.
PR Close#36637
Prior to this commit, the unknown property check was unnecessarily invoked for AOT-compiled components (for these components, the check happens at compile time). This commit updates the code to avoid unknown property verification for AOT-compiled components by checking whether schemas information is present (as a way to detect whether this is JIT or AOT compiled component).
Resolves#35945.
PR Close#36072
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
In certain use-cases it's useful to have an ability to use empty strings as translations. Currently Ivy fails at runtime if empty string is used as a translation, since some parts of internal data structures are not created properly. This commit updates runtime i18n logic to handle empty translations and avoid unnecessary extra processing for such cases.
Fixes#36476.
PR Close#36499
When formatting a time with the `b` or `B` format codes, the rendered
string was not correctly handling day periods that spanned midnight.
Instead the logic was falling back to the default case of `AM`.
Now the logic has been updated so that it matches times that are within
a day period that spans midnight, so it will now render the correct
output, such as `at night` in the case of English.
Applications that are using either `formatDate()` or `DatePipe` and any
of the `b` or `B` format codes will be affected by this change.
Fixes#36566
PR Close#36611
On Windows, the output of a detached process (such as the unlocker
process used by `LockFileWithChildProcess`) is not shown in the parent
process' stdout.
This commit addresses this by piping the spawned process' stdin/stdout
and manually writing to the parent process' stdout.
PR Close#36569
The current ngcc lock-file strategy spawns a new process in order to
capture a potential `SIGINT` and remove the lock-file. For more
information see #35861.
Previously, this unlocker process was spawned as soon as the `LockFile`
was instantiated in order to have it available as soon as possible
(given that spawning a process is an asynchronous operation). Since the
`LockFile` was instantiated and passed to the `Executor`, this meant
that an unlocker process was spawned for each cluster worker, when
running ngcc in parallel mode. These processes were not needed, since
the `LockFile` was not used in cluster workers, but we still had to pay
the overhead of each process' own memory and V8 instance.
(NOTE: This overhead was small compared to the memory consumed by ngcc's
normal operations, but still unnecessary.)
This commit avoids the extra processes by only spawning an unlocker
process when running on the cluster master process and not on worker
processes.
PR Close#36569
For some reason (possibly related to async/await promises)
the ngcc process is not exiting when spawned from the CLI
when there has been an error (such as when it timesout waiting
for a lockfile to become free).
Calling `process.exit()` directly fixes this.
Fixes#36616
PR Close#36622
Updates the $locationShim to receive the most recent Location change
made, even if it happened before initialize() is called. This is
important when AngularJS bootstrapping is deferred and there is a delay
between when $locationShim is constructed and when it is initialized.
With this change, the $locationShim will correctly reflect any redirects
that occurred between construction and initialization.
Closes#36492
PR Close#36498
The undecorated-classes-with-decorated-fields migration relies on
the type checker to resolve base classes of individual classes.
It could happen that resolved base classes have no value declaration.
e.g. if they are declared through an interface in the default types.
Currently the migration will throw in such situations because it assumes
that `ts.Symbol#valueDeclaration` is always present. This is not the
case, but we don't get good type-checking here due to a bug in the
TypeScript types. See:
https://github.com/microsoft/TypeScript/issues/24706.
Fixes#36522.
PR Close#36543
Previously, when we needed to detect whether a file is external to a
package, we only checked whether the relative path to the file from the
package's root started with `..`. This would detect external imports
when the packages were siblings (e.g. peer dependencies or hoisted to
the top of `node_modules/` by the package manager), but would fail to
detect imports from packages located in nested `node_modules/` as
external. For example, importing `node_modules/foo/node_modules/bar`
from a file in `node_modules/foo/` would be considered internal to the
`foo` package.
This could result in processing/analyzing more files than necessary.
More importantly it could lead to errors due to trying to analyze
non-Angular packages that were direct dependencies of Angular packages.
This commit fixes it by also verifying that the relative path to a file
does not start with `node_modules/`.
Jira issue: [FW-2068](https://angular-team.atlassian.net/browse/FW-2068)
Fixes#36526
PR Close#36559
The base path for package and entry-points is known so there is
no need to store these in the file. Also this commit avoids storing
empty arrays unnecessarily.
PR Close#36486
Previously, even if an entry-point did not need to be processed,
ngcc would always parse the files of the entry-point to compute
its dependencies. This can take a lot of time for large node_modules.
Now these dependencies are cached in the entry-point manifest,
and read from there rather than computing them every time.
See https://github.com/angular/angular/issues/36414\#issuecomment-608401834
FW-2047
PR Close#36486
When the compiler needs to convert a type reference to a value
expression, it may encounter a type that refers to a namespaced symbol.
Such namespaces need to be handled specially as there's various forms
available. Consider a namespace named "ns":
1. One can refer to a namespace by itself: `ns`. A namespace is only
allowed to be used in a type position if it has been merged with a
class, but even if this is the case it may not be possible to convert
that type into a value expression depending on the import form. More
on this later (case a below)
2. One can refer to a type within the namespace: `ns.Foo`. An import
needs to be generated to `ns`, from which the `Foo` property can then
be read.
3. One can refer to a type in a nested namespace within `ns`:
`ns.Foo.Bar` and possibly even deeper nested. The value
representation is similar to case 2, but includes additional property
accesses.
The exact strategy of how to deal with these cases depends on the type
of import used. There's two flavors available:
a. A namespaced import like `import * as ns from 'ns';` that creates
a local namespace that is irrelevant to the import that needs to be
generated (as said import would be used instead of the original
import).
If the local namespace "ns" itself is referred to in a type position,
it is invalid to convert it into a value expression. Some JavaScript
libraries publish a value as default export using `export = MyClass;`
syntax, however it is illegal to refer to that value using "ns".
Consequently, such usage in a type position *must* be accompanied by
an `@Inject` decorator to provide an explicit token.
b. An explicit namespace declaration within a module, that can be
imported using a named import like `import {ns} from 'ns';` where the
"ns" module declares a namespace using `declare namespace ns {}`.
In this case, it's the namespace itself that needs to be imported,
after which any qualified references into the namespace are converted
into property accesses.
Before this change, support for namespaces in the type-to-value
conversion was limited and only worked correctly for a single qualified
name using a namespace import (case 2a). All other cases were either
producing incorrect code or would crash the compiler (case 1a).
Crashing the compiler is not desirable as it does not indicate where
the issue is. Moreover, the result of a type-to-value conversion is
irrelevant when an explicit injection token is provided using `@Inject`,
so referring to a namespace in a type position (case 1) could still be
valid.
This commit introduces logic to the type-to-value conversion to be able
to properly deal with all type references to namespaced symbols.
Fixes#36006
Resolves FW-1995
PR Close#36106
Although this code has been part of Angular 9.x I only noticed this
error when upgrading to Angular 9.1.x because historically the source
locale data was not injected when localizing, but as of
angular/angular-cli#16394 (9.1.0) it is now included. This tipped me off
that my other bundles were not being built properly, and this change
allows me to build a valid ES5 bundle (I have also added a verification
step to my build pipeline to alert me if this error appears again in any
of my bundles).
I found the `locales/global/*.js` file paths being referenced by the
`I18nOptions` in
@angular-devkit/build-angular/src/utils/i18n-options.ts,
and following that it looks like it is actually loaded and used in
@angular-devkit/build-angular/src/utils/process-bundle.ts. I saw the
function `terserMangle` does appear that it is likely aware of the build
being ES5, but I'm not sure why this is not producing a valid ES5
bundle.
This change updates `tools/gulp-tasks/cldr/extract.js` to produce ES5
compliant `locales/global/*.js` and that fixes my issue. However, I am
not sure if @angular-devkit/build-angular should be modified to produce
a valid ES5 bundle instead or if the files could be TypeScript rather
than JavaScript files.
A test that a valid ES5 bundle is produced would be helpful, and I hope
this is reproducible and not some issue with my config.
PR Close#36342
Previously, it was not clear that the `minLength` and `maxLength` validators
can only be used with objects that contain a `length` property. This commit
clarifies this.
PR Close#36297
fixes#34614
There's an edge case where if I use two (or more) sibling <router-outlet>s in two (or more) child routes where their parent route doesn't have a component then preactivation will trigger all canDeactivate checks with the same component because it will use wrong OutletContext.
PR Close#36302
Previously we had a singleton `ROOT_SCOPE` object, from
which all `BindingScope`s derived. But this caused ngcc to
produce non-deterministic output when running multiple workers
in parallel, since each process had its own `ROOT_SCOPE`.
In reality there is no need for `BindingScope` reference names
to be unique across an entire application (or in the case of ngcc
across all the libraries). Instead we just need uniqueness within
a template.
This commit changes the compiler to create a new root `BindingScope`
each time it compiles a component's template.
Resolves#35180
PR Close#36362
In cc4b813e75 the `getBasePaths()`
function was changed to log a warning if a `basePath()` computed from
the `paths` mappings did not exist. It turns out this is a common and
accepted scenario, so we should not log warnings in this case.
Fixes#36518
PR Close#36525
This commit removes individual components from parsing-cases.ts and
colocate them with the actual tests. This makes the tests more readable.
PR Close#36495
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
`zone.js` supports jest `test.each()` methods, but it
introduces a bug, which is the `done()` function will not be handled correctly.
```
it('should work with done', done => {
// done will be undefined.
});
```
The reason is the logic of monkey patching `test` method is different from `jasmine` patch
// jasmine patch
```
return testBody.length === 0
? () => testProxyZone.run(testBody, null)
: done => testProxyZone.run(testBody, null, [done]);
```
// jest patch
```
return function(...args) {
return testProxyZone.run(testBody, null, args);
};
```
the purpose of this change is to handle the following cases.
```
test.each([1, 2])('test.each', (arg1, arg2) => {
expect(arg1).toBe(1);
expect(arg2).toBe(2);
});
```
so in jest, it is a little complex, because the `testBody`'s parameter may be bigger than 1, so the
logic in `jasmine`
```
return testBody.length === 0
? () => testProxyZone.run(testBody, null)
: done => testProxyZone.run(testBody, null, [done]);
```
will not work for `test.each` in jest.
So in this PR, I created a dynamic `Function` to return the correct length of paramters (which is required by jest core), to handle
1. normal `test` with or without `done`.
2. each with parameters with or without done.
PR Close#36022
During static evaluation of expressions, the partial evaluator
may come across a binary + operator for which it needs to
evaluate its operands. Any of these operands may be a reference
to an enum member, in which case the enum member's value needs
to be used as literal value, not the enum member reference
itself. This commit fixes the behavior by resolving an
`EnumValue` when used as a literal value.
Fixes#35584
Resolves FW-1951
PR Close#36461
Previously, `isRelativePath()` assumed paths are *nix-style. This caused
Windows-style paths (such as `C:\foo\some-package\some-file.js`) to not
be recognized as "relative" imports.
This commit fixes this by using the OS-agnostic `isRooted()` helper and
also accounting for both styles of path delimiters: `/` and `\`
PR Close#36372
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
When TypeScript downlevels ES2015+ code to ES5, it uses some helper
functions to emulate some ES2015+ features, such as spread syntax. The
TypeScript compiler can be configured to emit these helpers into the
transpiled code (which is controlled by the `noEmitHelpers` option -
false by default). It can also be configured to import these helpers
from the `tslib` module (which is controlled by the `importHelpers`
option - false by default).
While most of the time the helpers will be either emitted or imported,
it is possible that one configures their app to neither emit nor import
them. In that case, the helpers could, for example, be made available on
the global object. This is what `@nativescript/angular`
v9.0.0-next-2019-11-12-155500-01 does. See, for example, [common.js][1].
Ngcc must be able to detect and statically evaluate these helpers.
Previously, it was only able to detect emitted or imported helpers.
This commit adds support for detecting these helpers if they are neither
emitted nor imported. It does this by checking identifiers for which no
declaration (either concrete or inline) can be found against a list of
known TypeScript helper function names.
[1]: https://unpkg.com/browse/@nativescript/angular@9.0.0-next-2019-11-12-155500-01/common.js
PR Close#36418
This commit refactors the process for determining the type of an Angular
attribute to be use a function that takes an attribute name and returns
the Angular attribute kind and name, rather than requiring the user to
query match the attribute name with the regex and query the matching
array.
This refactor prepares for a future change that will improve the
experience of completing attributes in `()`, `[]`, or `[()]` contexts.
PR Close#36301
Recent ZoneJS-related commit (416c786774) update the `promise.ts` file, but it looks like original PR was not rebased after clang update. As a result, the `lint` CircleCI job started to fail in master after merging that PR (https://github.com/angular/angular/pull/36311). This commit updates the format of the `promise.ts` script according to the new clang rules.
PR Close#36487
Close#36142
In Firefox extensions, the `window.fetch` is not configurable, that means
```
const desc = Object.getOwnPropertyDescriptor(window, 'fetch');
desc.writable === false;
```
So in this case, we should not try to patch `fetch`, otherwise, it will
throw error ('fetch is ReadOnly`)
PR Close#36311
In rare cases a project with configured `rootDirs` that has imports to
non-existent identifiers could fail in the migration.
This happens because based on the application code, the migration could
end up trying to resolve the `ts.Symbol` of such non-existent
identifiers. This isn't a problem usually, but due to a upstream bug
in the TypeScript compiler, a runtime error is thrown.
This is because TypeScript is unable to compute a relative path from the
originating source file to the imported source file which _should_
provide the non-existent identifier. An issue for this has been reported
upstream: https://github.com/microsoft/TypeScript/issues/37731. The
issue only surfaces since our migrations don't provide an absolute base
path that is used for resolving the root directories.
To fix this, we ensure that we never use relative paths when parsing
tsconfig files. More details can be found in the TS issue.
Fixes#36346.
PR Close#36367
The source-map flattening was throwing an error when there
is a cyclic dependency between source files and source-maps.
The error was either a custom one describing the cycle, or a
"Maximum call stack size exceeded" one.
Now this is handled more leniently, resulting in a partially loaded
source file (or source-map) and a warning logged.
Fixes#35727Fixes#35757
Fixes https://github.com/angular/angular-cli/issues/17106
Fixes https://github.com/angular/angular-cli/issues/17115
PR Close#36452
Recently we added support for ignoring specified deep-import
warnings by providing sets of regular expressions within the
`ngcc.config.js` file. But this was only working for the project
level configuration.
This commit fixes ngcc so that it will also read these regular
expressions from package level configuration too.
Fixes#35750
PR Close#36423
The `browser` package.json property is now supported to the same
level as `main` - i.e. it is sniffed for UMD, ESM5 and CommonJS.
The `browser` property can also contain an object with file overrides
but this is not supported by ngcc.
Fixes#36062
PR Close#36396
Previously, `main` was only checked for `umd` or `commonjs`
formats. Now if there are `import` or `export` statements in the
source file it will be deemed to be in `esm5` format.
Fixes#35788
PR Close#36396
clang-format was recently updated and any PRs that touch files in the
language service will have to reformat all the files.
Instead of changing the formatting in those PRs, this PR formats all
files in language-service package once and for all.
PR Close#36426
The matcher is allowed to return null per
https://angular.io/api/router/UrlMatcher#usage-notes
And run `yarn gulp format` to pick up recent clang format changes.
Closes#29824
BREAKING CHANGE: UrlMatcher's type now reflects that it could always return
null.
If you implemented your own Router or Recognizer class, please update it to
handle matcher returning null.
PR Close#36402
Rebuild the yarn lock file from scratch to collapse instances where
one package is able to satisfy multiple dependencies. Currently we
have some situations where we have multiple versions when one would
work.
Example:
```
"@babel/code-frame@^7.0.0":
version "7.0.0"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-OfC2uemaknXr87bdLUkWog7nYuliM9Ij
dependencies:
"@babel/highlight" "^7.0.0"
"@babel/code-frame@^7.5.5":
version "7.5.5"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-27d4lZoomVyo51VegxI20xZPuSHusqbQ
dependencies:
"@babel/highlight" "^7.0.0"
"@babel/code-frame@^7.8.3":
version "7.8.3"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-a9gxpmdXtZEInkCSHUJDLHZVBgb1QS0j
dependencies:
"@babel/highlight" "^7.8.3"
```
becomes
```
"@babel/code-frame@^7.0.0", "@babel/code-frame@^7.5.5", "@babel/code-frame@^7.8.3":
version "7.8.3"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-a9gxpmdXtZEInkCSHUJDLHZVBgb1QS0j
dependencies:
"@babel/highlight" "^7.8.3"
```
PR Close#36377
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
In #36089, `DelegatingReflectionHost` was introduced, which delegates to
a TypeScript `ReflectionHost` when reflecting on TypeScript files, which
for ngcc's case means `.d.ts` files of dependencies. As a result, ngcc
lost the ability to detect TypeScript helpers imported from `tslib`,
because `DelegatingReflectionHost` was not able to apply the known
declaration detection logic while reflecting on `tslib`'s `.d.ts` files.
This commit fixes this by ensuring `DelegatingReflectionHost` calls the
`NgccReflectionHost`'s `detectKnownDeclaration()` method as necessary,
even when using the TypeScript `ReflectionHost`.
NOTE:
The previous commit exposed a bug in ngcc that was hidden due to the
tests' being inconsistent with how the `ReflectionHost`s are used in the
actual program. The changes in this commit are verified by ensuring the
failing tests are now passing (hence no new tests are added).
PR Close#36284
In #36089, `DelegatingReflectionHost` was introduced. Under the hood, it
delegates another `NgccReflectionHost` in order to reflect over the
program's source files, while using a different TypeScript
`ReflectionHost` to reflect over `.d.ts` files (which is how external
dependencies are represented in the program).
Previously, the `NgccReflectionHost`s were used directly in tests. This
does not exercise them in the way they are exercised in the actual
program, because (when used directly) they will also reflect on `.d.ts`
files too (instead of delegating to the TypeScript `ReflectionHost`).
This could hide bugs that would happen on the actual program.
This commit fixes this by using the `DelegatingReflectionHost` in the
various `NgccReflectionHost` tests.
NOTE:
This change will cause some of the existing tests to start failing.
These failures demonstrate pre-existing bugs in ngcc, that were hidden
due to the tests' being inconsistent with how the `ReflectionHost`s are
used in the actual program. They will be fixed in the next commit.
PR Close#36284
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
This commit moves the logic for identifying these known declarations to
dedicated methods. This is in preparation of allowing ngcc's
`DelegatingReflectionHost` (introduced in #36089) to also apply the
known declaration detection logic when reflecting on TypeScript sources.
PR Close#36284
In version 10, undecorated base classes that use Angular features need
to be decorated explicitly with `@Directive()`. Additionally, derived
classes of abstract directives need to be decorated.
The migration already handles this for undecorated classes that are
not explicitly decorated, but since in V9, abstract directives can be
used, we also need to handle this for explicitly decorated abstract
directives. e.g.
```
@Directive()
export class Base {...}
// needs to be decorated by migration when updating from v9 to v10
export class Wrapped extends Base {}
@Component(...)
export class Cmp extends Wrapped {}
```
PR Close#35339
We don't have an integration test for the `undecorated-classes-with-decorated-fields
migration. For consistency and to cover for the latest changes, we add
it to the `ng update` integration test.
PR Close#35339
The `undecorated-classes-with-decorated-fields` migration has been
introduced with 904a2018e0, but misses
logic for decorating derived classes of undecorated classes which use
Angular features. Example scenario:
```ts
export abstract class MyBaseClass {
@Input() someInput = true;
}
export abstract class BaseClassTwo extends MyBaseClass {}
@Component(...)
export class MyButton extends BaseClassTwo {}
```
Both abstract classes would need to be migrated. Previously, the migration
only added `@Directive()` to `MyBaseClass`, but with this change, it
also decorates `BaseClassTwo`.
This is necessary because the Angular Compiler requires `BaseClassTwo` to
have a directive definition when it flattens the directive metadata for
`MyButton` in order to perform type checking. Technically, not decorating
`BaseClassTwo` does not break at runtime.
We basically want to enforce consistent use of `@Directive` to simplify the
mental model. [See the migration guide](https://angular.io/guide/migration-undecorated-classes#migrating-classes-that-use-field-decorators).
Fixes#34376.
PR Close#35339
The import manager has been created for both the `missing-injectable`
and `undecorated-classes-with-di` migration. Both initial PRs brought
in the manager class, so the manager is duplicated in the schematics.
In order to reduce this duplication, and to expose the manager to other
schematics/migrations, we move it into the shared schematic utils.
PR Close#35339
Moves the `findBaseClassDeclarations` method into the shared
schematic utilities. This method will be useful for future
migrations, and for planned changes to the
`undecorated-classes-with-decorated-fields` migration.
PR Close#35339
Enables the `service-worker` tests on Saucelabs and fixes some issues that were preventing them from running on IE. The issues were:
1. We were serving es2017 code during tests. I've set it to es5.
2. The check which was verifying whether the environment is supported ended up hitting a `require` call in the browser which caused it to fail on browsers that don't support the `URL` API.
PR Close#36129
In Ivy, Angular decorators are compiled into static fields that are
inserted into a class declaration in a TypeScript transform. When
targeting Closure compiler such fields need to be annotated with
`@nocollapse` to prevent them from being lifted from a static field into
a variable, as that would prevent the Ivy runtime from being able to
find the compiled definitions.
Previously, there was a bug in TypeScript where synthetic comments added
in a transform would not be emitted at all, so as a workaround a global
regex-replace was done in the emit's `writeFile` callback that would add
the `@nocollapse` annotation to all static Ivy definition fields. This
approach is no longer possible when ngtsc is running as TypeScript
plugin, as a plugin cannot control emit behavior.
The workaround is no longer necessary, as synthetic comments are now
properly emitted, likely as of
https://github.com/microsoft/TypeScript/pull/22141 which has been
released with TypeScript 2.8.
This change is required for running ngtsc as TypeScript plugin in
Bazel's `ts_library` rule, to move away from the custom `ngc_wrapped`
approach.
Resolves FW-1952
PR Close#35932
Ngcc supports providing a project-level configuration to affect how
certain dependencies are processed and also has a built-in fallback
configuration for some unmaintained packages. Each entry in these
configurations could be scoped to specific versions of a package by
providing a version range. If no version range is provided for a
package, it defaults to `*` (with the intention of matching any
version).
Previously, the installed version of a package was tested against the
version range using the [semver][1] package's `satisfies()` function
with the default options. By default, `satisfies()` does not match
pre-releases (see [here][2] for more details on reasoning). While this
makes sense when determining what version of a dependency to install
(trying to avoid unexpected breaking changes), it is not desired in the
case of ngcc.
This commit fixes it by explicitly specifying that pre-release versions
should be matched normally.
[1]: https://www.npmjs.com/package/semver
[2]: https://github.com/npm/node-semver#prerelease-tags
PR Close#36370
From G3 bug ID: 116443331
The View Engine compiler crashes when it tries to compile a test in JIT mode
that includes the d3-scale-chromatic library [1]. The d3 package initializes
some arrays using the following pattern:
```js
export var scheme = new Array(3).concat(
"d8b365f5f5f55ab4ac",
// ... more entries
).map(colors);
```
The stack trace from the crash is as follows:
```
TypeError: Cannot read property 'visitExpression' of undefined
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:505:39
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllExpressions third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=505
at JitEmitterVisitor.AbstractEmitterVisitor.visitLiteralArrayExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=484
at LiteralArrayExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=791
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:492:19
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitLiteralMapExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=490
at LiteralMapExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=819
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:505:39
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllExpressions third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=505
at JitEmitterVisitor.AbstractEmitterVisitor.visitInvokeFunctionExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=318
at JitEmitterVisitor.AbstractJsEmitterVisitor.visitInvokeFunctionExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_js_emitter.ts?l=112
at InvokeFunctionExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=440
```
This is because the corresponding output AST for the array is of the form
```ts
[
undefined,
undefined,
undefined,
o.LiteralExpr,
// ...
]
```
The output AST is clearly malformed and breaks the type representation of
`LiteralArrayExpr` in which every entry is expected to be of type `Expression`.
This commit fixes the bug by using a plain `for` loop to iterate over the
entire length of the holey array and convert undefined elements to
`LiteralExpr`.
[1]: https://github.com/d3/d3-scale-chromatic/blob/master/src/diverging/BrBG.js
PR Close#36343
Previously, a bad baseUrl or path mapping passed to an `EntryPointFinder`
could cause the original `sourceDirectory` to be superceded by a higher
directory. This could result in none of the sourceDirectory entry-points being
processed.
Now missing basePaths computed from path-mappings are discarded with
a warning. Further, if the `baseUrl` is the root directory then a warning is
given as this is most likely an error in the tsconfig.json.
Resolves#36313Resolves#36283
PR Close#36331
Currently the language service only provides support for determining the
type of array-like members when the array-like object is an `Array`.
However, there are other kinds of array-like objects, including
`ReadonlyArray`s and `readonly`-property arrays. This commit adds
support for retrieving the element type of arbitrary array-like objects.
Closes#36191
PR Close#36312
The previous optimizations in #35756 to the
`DirectoryWalkerEntryPointFinder` were over zealous
with regard to packages that have entry-points stored
in "container" directories in the package, where the
container directory was not an entry-point itself.
Now we will also walk such "container" folders as long
as they do not contain `.js` files, which we regard as an
indicator that the directory will not contain entry-points.
Fixes#36216
PR Close#36305
This commit simplifies the `DirectoryWalkerEntryPointFinder` inter-method
calling to make it easier to follow, and also to support controlling
walking of a directory based on its children.
PR Close#36305
__zone_symbol__UNPATCHED_EVENTS and __zone_symbol__PASSIVE_EVENTS should be string[] type not boolean.
For example:
```
const config = window as ZoneGlobalConfigurations;
config.__zone_symbol__UNPATCHED_EVENTS = ['scroll'];
config.__zone_symbol__PASSIVE_EVENTS = ['scroll'];
```
PR Close#36258
`Bluebird.each` and `Bluebird.mapSeries` will accept a callback with `value` parameter,
the `value` should be the item in the array, not array itself.
For example:
```
const arr = [1, 2];
Bluebird.each(arr, function(value, idx) {
console.log(`value: ${value}, idx: ${idx}`);
})
```
the output will be
```
value: 1, idx: 0
value: 2, idx: 1
```
This PR fix the test cases for `each` and `mapSeries` APIs.
PR Close#36295
Prior to this commit, the `packages/core/src/render3/interfaces/query.ts` file used to import `QueryList` using `../../linker`, which contains a lot of re-exports and as a result, this one import caused a lot of circular deps cycles reported by the tool that checks such deps. In other places in the code the `QueryList` is imported using more narrow import (`linker/query_list`), so this commit uses the same pattern. This change allowed to reduce the number of known cycles from 343 to 207, the golden file was updated accordingly.
PR Close#36286
Previously we only searched for package paths below the set of `basePaths`
that were computed from the `basePath` provided to ngcc and the set of
`pathMappings`.
In some scenarios, such as hoisted packages, the entry-point is not within
any of the `basePaths` identified above. For example:
```
project
packages
app
node_modules
app-lib (depends on lib1)
node_modules
lib1 (depends on lib2)
node_modules
lib2 (depends on lib3/entry-point)
lib3
entry-point
```
When CLI is compiling `app-lib` ngcc will be given
`project/packages/app/node_modules` as the `basePath.
If ngcc is asked to target `lib2`, the `targetPath` will be
`project/node_modules/lib1/node_modules/lib2`.
Since `lib2` depends upon `lib3/entry-point`, ngcc will need to compute
the package path for `project/node_modules/lib3/entry-point`.
Since `project/node_modules/lib3/entry-point` is not contained in the `basePath`
`project/packages/app/node_modules`, ngcc failed to compute the `packagePath`
correctly, instead assuming that it was the same as the entry-point path.
Now we also consider the nearest `node_modules` folder to the entry-point
path as an additional `basePath`. If one is found then we use the first
directory directly below that `node_modules` directory as the package path.
In the case of our example this extra `basePath` would be `project/node_modules`
which allows us to compute the `packagePath` of `project/node_modules/lib3`.
Fixes#35747
PR Close#36249
Prior to this commit, Ivy TestBed was accessing locale ID before `APP_INITIALIZER` functions were called. This execution order is not consistent with the app bootstrap logic in `application_ref.ts`. This commit updates Ivy TestBed execution order to call initializers first (since they might affect `LOCALE_ID` token value) and accessing and setting locale ID after that.
Fixes#36230.
PR Close#36237
Currently the `ts-circular-deps` tool uses a hard-coded module resolver
that only works in the `angular/angular` repository.
If the tool is consumed in other repositories through the shared
dev-infra package, the module resolution won't work, and a few
resolvable imports (usually cross-entry-points) are accidentally
skipped. For each test, the resolution might differ, so tests can
now configure their module resolution in a configuration file.
Note that we intentionally don't rely on tsconfig's for module
resolution as parsing their mappings rather complicates the
circular dependency tool. Additionally, not every test has a
corresponding tsconfig file.
Also, hard-coding mappings to `@angular/*` while accepting a
path to the packages folder would work, but it would mean
that the circular deps tool is no longer self-contained. Rather,
and also for better flexibility, a custom resolver should be
specified.
PR Close#36226
Previously, some of the built-in ServiceWorker registration strategies,
namely `registerWithDelay:<timeout>` and `registerWhenStable:<timeout>`,
would register potentially long-running timeout, thus preventing the app
from stabilizing before the timeouts expired. This was especially
problematic for the `registerWhenStable:<timeout>` strategy, which waits
for the app to stabilize, because the strategy itself would prevent the
app from stabilizing and thus the ServiceWorker would always be
registered after the timeout.
This commit fixes this by subscribing to the registration strategy
observable outside the Angular zone, thus not affecting the app's
stabilization.
PR Close#35870
Previously, when using the default ServiceWorker registration strategy
Angular would wait indefinitely for the [app to stabilize][1], before
registering the ServiceWorker script. This could lead to a situation
where the ServiceWorker would never be registered when there was a
long-running task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit fixes this by changing the default registration strategy
from `registerWhenStable` to `registerWhenStable:30000`, which will
ensure that the ServiceWorker will be registered after 30s at the
latest, even if the app has not stabilized by then.
Fixes#34464
PR Close#35870
Previously, when using the `registerWhenStable` ServiceWorker
registration strategy (which is also the default) Angular would wait
indefinitely for the [app to stabilize][1], before registering the
ServiceWorker script. This could lead to a situation where the
ServiceWorker would never be registered when there was a long-running
task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit enhances the `registerWhenStable` registration strategy by
adding support for an optional `<timeout>` argument, which guarantees
that the ServiceWorker will be registered when the timeout expires, even
if the app has not stabilized yet.
For example, with `registerWhenStable:5000` the ServiceWorker will be
registered as soon as the app stabilizes or after 5 seconds if the app
has not stabilized by then.
Related to #34464.
[1]: https://angular.io/api/core/ApplicationRef#is-stable-examples
PR Close#35870
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
Previously ngcc never preserved whitespaces but this is at odds
with how the ViewEngine compiler works. In ViewEngine, library
templates are recompiled with the current application's tsconfig
settings, which meant that whitespace preservation could be set
in the application tsconfig file.
This commit allows ngcc to use the `preserveWhitespaces` setting
from tsconfig when compiling library templates. One should be aware
that this disallows different projects with different tsconfig settings
to share the same node_modules folder, with regard to whitespace
preservation. But this is already the case in the current ngcc since
this configuration is hard coded right now.
Fixes#35871
PR Close#36189
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Previously, when an input property was initially set to `undefined` it
would not be correctly recognized as a change (and trigger
`ngOnChanges()`).
This commit ensures that explicitly setting an input to `undefined` is
correctly handled the same as setting the property to any other value.
This aligns the behavior of Angular custom elements with that of the
corresponding components when used directly (not as custom elements).
PR Close#36140
Previously, when an input property was set on an `NgElement` before
instantiating the underlying component, the `SimpleChange` object passed
to `ngOnChanges()` would have `firstChange` set to false, even if this
was the first change (as far as the component instance was concerned).
This commit fixes this by ensuring `SimpleChange#firstChange` is set to
true on first change, regardless if the property was set before or after
instantiating the component. This alignthe behavior of Angular custom
elements with that of the corresponding components when used directly
(not as custom elements).
Jira issue: [FW-2007](https://angular-team.atlassian.net/browse/FW-2007)
Fixes#36130
PR Close#36140
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
I was not able to reproduce IE 10/11 failrue of the disabled
tests on SauceLabs any more. I did some cleanup of the test
in question but I doubt it was the root cause of the problem.
PR Close#35962
Previously, an expansion case could only start with an alpha numeric character.
This commit fixes this by allowing an expansion case to start with any character
except `}`.
The [ICU spec](http://userguide.icu-project.org/formatparse/messages) is pretty vague:
> Use a "select" argument to select sub-messages via a fixed set of keywords.
It does not specify what can be a "keyword" but from looking at the surrounding syntax it
appears that it can indeed be any string that does not contain a `}` character.
Closes#31586
PR Close#36123
This commit propagates the correct value span in an ExpressionBinding of
a microsyntax expression to ParsedProperty, which in turn porpagates the
span to the template ASTs (both VE and Ivy).
PR Close#36133
When using `platformBrowserDynamic().bootstrapModule()`, it is possible
to set `defaultEncapsulation` and `preserveWhitespaces` as default
configuration to influence how components are compiled. When compiling
components in JIT with Ivy, these options were not taken into account.
This commit publishes the options to be globally available, so that the
lazy compilation of JIT components has access to the configured
bootstrap options. Note that this approach does not allow changing the
options once they have been set, as Ivy's compilation model does not
allow for multiple compilations to exist at the same time.
For applications that bootstrap multiple modules, it is now required
to provide the exact same bootstrap options. An error is logged if
incompatible bootstrap options are provided, in which case the updated
options will be ignored.
Fixes#35230
Resolved FW-1838
PR Close#35534
When two entry-points overlap, ngcc may attempt to process some
files twice. Previously, when this occured ngcc would just exit with an
error preventing any other entry-points from being processed.
This commit changes ngcc so that if `errorOnFailedEntryPoint` is false, it will
simply log an error and continue to process entry-points. This is useful when
ngcc is processing the entire node_modules folder and there are some invalid
entry-points that the project doesn't actually use.
PR Close#36083
Previously, when an entry-point contained code that caused its compilation
to fail, ngcc would exit in the middle of processing, possibly leaving other
entry-points in a corrupt state.
This change adds a new `errorOnFailedEntryPoint` option to `mainNgcc` that
specifies whether ngcc should exit immediately or log an error and continue
processing other entry-points.
The default is `false` so that ngcc will not error but continue processing
as much as possible. This is useful in post-install hooks, and async CLI
integration, where we do not have as much control over which entry-points
should be processed.
The option is forced to true if the `targetEntryPointPath` is provided,
such as the sync integration with the CLI, since in that case it is targeting
an entry-point that will actually be used in the current project so we do want
ngcc to exit with an error at that point.
PR Close#36083
Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
Updates to the latest `@bazel/ibazel` version that properly
resolves local `@bazel/bazelisk` installations.
The support for this temporarily broke from `0.12.0` to `0.12.2`.
https://github.com/bazelbuild/bazel-watcher/issues/352.
PR Close#36097
This commit improves the context of a non-callable function error
message by providing the affected call target and its non-callable type.
PR Close#35271
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
To create the symbols of a module, the static symbol resolver first gets
all the symbols loaded in the module by an export statement. For `export
* from './module'`-like statements, all symbols from `./module` must be
loaded. In cases where the exporting module is actually the same module
that the export statement is in, this causes an unbounded recursive
resolution of the same module.
Exports of the same module are not needed, as their symbols will be
resolved when the symbols in the module metadata's `metadata` key is
explored.
This commit resolves the unbounded recursion by loading exporting
modules only if they differ from the module currently being resolved.
Closes https://github.com/angular/vscode-ng-language-service/issues/593
PR Close#35262
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Close#31687, #31684
Zone.js patches rxjs internal `_subscribe` and `_unsubscribe` methods, but zone.js doesn't do null check, so in some operator such as `retryWhen`, the `_unsubscribe` will be set to null, and will cause
zone patched version throw error.
In this PR, if `_subscribe` and `_unsubscribe` is null, will not do the patch.
PR Close#35990
`zone.js` added `removeAllListeners` and `eventListeners` methods in `EventTarget.prototype`, but those methods only exists when user import `zone.js` and also enables `EventTarget` monkey patching.
If user:
1. Does not import `zone.js` and uses `noop` zone when bootstrapping Angular app. OR
2. Disable monkey patching of `EventTarget` patch by defining `__Zone_disable_EventTarget = true`.
Then `removeAllListeners` and `eventListeners` methods will not be present.
PR Close#35954
Close#27840.
By default, `zone.js` wrap uncaught promise error and wrap it to a new Error object with some
additional information includes the value of the error and the stack trace.
Consider the following example:
```
Zone.current
.fork({
name: 'promise-error',
onHandleError: (delegate: ZoneDelegate, current: Zone, target: Zone, error: any): boolean => {
console.log('caught an error', error);
delegate.handleError(target, error);
return false;
}
}).run(() => {
const originalError = new Error('testError');
Promise.reject(originalError);
});
```
The `promise-error` zone catches a wrapped `Error` object whose `rejection` property equals
to the original error, and the message will be `Uncaught (in promise): testError....`,
You can disable this wrapping behavior by defining a global configuraiton
`__zone_symbol__DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION = true;` before importing `zone.js`.
PR Close#35873
Monkey patch `MessagePort.prototype.onmessage` and `MessagePort.prototype.onmessageerror` to make
these properties's value(callback function) run in the zone when these value are set.
PR Close#34610
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
Prior to this commit, i18n runtime logic relied on the assumption that provided translation is syntactically correct, specifically around ICU syntax. However provided translations might contain some errors that lead to parsing failure. Specifically when translation contains curly braces, runtime i18n logic tries to parse them as an ICU expression and fails. This commit validates ICU parsing result (making sure it was parsed correctly) and throws an error if parsing error happens. The error that is thrown also contains translated message text for easier debugging.
Note: the check and the error message introduced in this PR is a safeguard against the problem that led to unhandled i18n runtime logic crash. So the framework behavior remains the same, we just improve the error message and it should be safe to merge to the patch branch.
Resolves#35689.
PR Close#35923
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Close#35878.
Before zone.js 0.10, the rollup config would refer to `rxjs` when bundling `zone-patch-rxjs.js`
From zone.js 0.10, we started to use bazel to build `zone-patch-rxjs.js` and the configuration was wrongly defined to include a copy of `rxjs` in the `zone-patch-rxjs.js`.
PR Close#35983
In some scenarios it is useful for the developer to indicate
to ngcc that it should not use the entry-point manifest
file, and instead write a new one.
In the ngcc command line tool, this option is set by specfying
```
--invalidate-entry-point-manifest
```
PR Close#35931
The `DirectoryWalkerEntryPointFinder` has to traverse the
entire node_modules library everytime it executes in order to
identify the entry-points that need to be processed. This is
very time consuming (several seconds for big projects on
Windows).
This commit changes the `DirectoryWalkerEntryPointFinder` to
use the `EntryPointManifest` to store the paths to entry-points
that were found when doing this initial node_modules traversal
in a file to be reused for subsequent calls.
This dramatically speeds up ngcc processing when it has been run once
already.
PR Close#35931
The new `EntryPointManifest` class can read and write a
manifest file that contains all the paths to the entry-points
that have been found in a node_modules folder.
This can be used to speed up finding entry-points in
subsequent runs.
The manifest file stores the ngcc version and hashes of
the package lock-file and project config, since if these
change the manifest will need to be recomputed.
PR Close#35931
Today, the language service infers the type of variables bound to the
"ngIf" template context member of an NgIf directive, but does not do the
same for the the "$implicit" context member. This commit adds support
for that.
Fixes https://github.com/angular/vscode-ng-language-service/issues/676
PR Close#35941
This commit adds fine-grained text spans to TemplateBinding for microsyntax expressions.
1. Source span
By convention, source span refers to the entire span of the binding,
including its key and value.
2. Key span
Span of the binding key, without any whitespace or keywords like `let`
The value span is captured by the value expression AST.
This is part of a series of PRs to fix source span mapping in microsyntax expression.
For more info, see the doc https://docs.google.com/document/d/1mEVF2pSSMSnOloqOPQTYNiAJO0XQxA1H0BZyESASOrE/edit?usp=sharing
PR Close#35897
95c729f5d1 added support for TypeScript v3.8. Since
these versions are now supported, the `typescript` peer dependency
range in `@angular/bazel` needs to be updated to not report unsatisfied
peer dependencies.
PR Close#36013
Currently, when running the ngcc binary directly and provide an invalid option ngcc will not error out and the user might have a hard time telling why ngcc is behaving not as expected.
With this change we now output an actionable error:
```
yarn ngcc --unknown-option
Options:
--version Show version number [boolean]
-s, --source A path (relative to the working directory)
of the `node_modules` folder to process.
[default: "./node_modules"]
-p, --properties An array of names of properties in
package.json to compile (e.g. `module` or
`es2015`)
Each of these properties should hold the
path to a bundle-format.
If provided, only the specified properties
are considered for processing.
If not provided, all the supported format
properties (e.g. fesm2015, fesm5, es2015,
esm2015, esm5, main, module) in the
package.json are considered. [array]
-t, --target A relative path (from the `source` path) to
a single entry-point to process (plus its
dependencies).
--first-only If specified then only the first matching
package.json property will be compiled.
[boolean]
--create-ivy-entry-points If specified then new `*_ivy_ngcc`
entry-points will be added to package.json
rather than modifying the ones in-place.
For this to work you need to have custom
resolution set up (e.g. in webpack) to look
for these new entry-points.
The Angular CLI does this already, so it is
safe to use this option if the project is
being built via the CLI. [boolean]
--legacy-message-ids Render `$localize` messages with legacy
format ids.
The default value is `true`. Only set this
to `false` if you do not want legacy
message ids to
be rendered. For example, if you are not
using legacy message ids in your
translation files
AND are not doing compile-time inlining of
translations, in which case the extra
message ids
would add unwanted size to the final source
bundle.
It is safe to leave this set to true if you
are doing compile-time inlining because the
extra
legacy message ids will all be stripped
during translation.
[boolean] [default: true]
--async Whether to compile asynchronously. This is
enabled by default as it allows
compilations to be parallelized.
Disabling asynchronous compilation may be
useful for debugging.
[boolean] [default: true]
-l, --loglevel The lowest severity logging message that
should be output.
[choices: "debug", "info", "warn", "error"]
--invalidate-entry-point-manifest If this is set then ngcc will not read an
entry-point manifest file from disk.
Instead it will walking the directory tree
as normal looking for entry-points, and
then write a new manifest file.
[boolean] [default: false]
--help Show help [boolean]
Unknown arguments: unknown-option, unknownOption
```
PR Close#36010
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Pure pipes are not invoked again until their arguments are modified. The same
rule should apply to pure pipes that throw an exception. This fix ensures that
a pure pipe is not re-invoked if it throws an exception and arguments are not
changed.
PR Close#35827
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
Fixes the following issues which caused the `elements` unit tests to break on IE:
1. `core.js` wasn't included which caused an error about `Promise` and `Symbol` to be thrown.
2. We were using a version of `@webcomponents/custom-elements` which was shipping ES6 code to npm. As a result, IE was throwing a syntax error.
PR Close#35940
This commit splits the ngtsc `core` package's api entrypoint, which
previously was a single `api.ts` file, into an api/ directory with multiple
files. This is done to isolate the parts of the API definitions pertaining
to the public-facing `angularCompilerOptions` field in tsconfig.json into a
single file, which will enable a public API guard test to be added in a
future commit.
PR Close#35885
`@angular/platform-browser/animations` has a dependency on `@angular/animations` however, this is not listed in `peerDependencies`
With this change we add this package as an optional peerDependency as it's only required when using the `@angular/platform-browser/animations` entrypoint.
Fixes#35888
PR Close#35949
This commit accomplishes two tasks:
- Fixes the span of queried pipes to only be applied on pipe names
- By consequence, fixes how pipes are located in arguments (previously,
pipes with arguments could not be found because the span of a pipe
uses a relative span, while the template position is absolute)
The screenshots attached to the PR for this commit demonstrate the
change.
Closes https://github.com/angular/vscode-ng-language-service/issues/677
PR Close#35986
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
XLIFF translation files can contain multiple `<file>` elements,
each of which contains translations. In ViewEngine all these
translations are merged into a single translation bundle.
Previously in Ivy only the translations from the last `<file>`
element were being loaded. Now all the translations from each
`<file>` are merged into a single translation bundle.
Fixes#35839
PR Close#35936
TemplateAst values are currently typed as the base class AST, but they
are actually constructed with ASTWithSource. Type them as such, because
ASTWithSource gives more information about the consumed expression AST
to downstream customers (namely, the expression AST source).
Unblocks #35271
PR Close#35892
This commit improves the `canParse()` method to check that the file is
valid XML and has the expected root node. Previously it was relying upon
a regular expression to do this.
PR Close#35793
Previously, the `Xliff2TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="2.0">` which is the minimal requirement for such files.
PR Close#35793
Previously, the `Xliff1TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="1.2">` which is the minimal requirement for such files.
PR Close#35793
This modifies the internal (but shared with CLI) API for loading/parsing
translation files. Now the parsers will return a new `Diagnostics` object
along with any translations and locale extracted from the file.
It is up to the caller to decide what to do about this, if there are errors
it is suggested that an error is thrown, which is what the `TranslationLoader`
class does.
PR Close#35793
Calling `tick(0, null)` defaults `processNewMacroTasksSynchronously` flag to `true`, however calling `tick(0, null, {})` defaults `processNewMacroTasksSynchronously` to `undefined`. This is undesirable behavior since unless the flag is set explicitly it should still default to `true`.
PR Close#35814
Currently, the `ng_module` rule incorrectly uses manifest paths for
generated imports from the Angular compiler.
This breaks packaging as prodmode output (i.e. `esnext`) is copied in
various targets (`es5` and `es2015`) to the npm package output.
e.g. imports are generated like:
_node_modules/my-pkg/es2015/imports/public-api.js_
```ts
import * as i1 from "angular/packages/bazel/test/ng_package/example/imports/second";
```
while it should be actually:
```ts
import * as i1 from "./second";
```
The imports can, and should be relative so that the files are
self-contained and do not rely on custom module resolution.
PR Close#35841
The options for `flatModuleId` and `flatModuleOutFile` had been removed in the CLI
from generated libraries with 718ee15b9a.
This has been done because `ng-packagr` (which is used to build the
libraries) automatically set these options in-memory when it compiles the library.
No migration has been created for this because there was no actual need to get rid of
this. Keeping the options in the library `tsconfig` does not cause any problems unless
the `tsconfig` is used outside of `ng-packagr`. This was not anticipated, but is now
commonly done in `ng update` migrations.
The `ng update` migrations try to create an instance of the `AngularCompilerProgram` by
simply parsing the `tsconfig`. The migrations make the valid assumption that `tsconfig` files
are not incomplete/invalid. They _definitely_ are in the file system though. It just works for
libraries because `ng-packagr` in-memory completes the invalid `tsconfig` files, so that they
can be passed to the `@angular/compiler-cli`.
We can't have this logic in the `ng update` migrations because it's
out-of-scope for individual migrations to distinguish between libraries
and applications. Also it would be out-of-scope to parse the
`ng-packagr` configuration and handle the tsconfig in-memory completion.
As a workaround though, we can remove the flat-module bundle options
in-memory when creating the compiler program. This is acceptable since
we don't emit the program and the flat module bundles are not needed.
Fixes#34985.
PR Close#35824
This version of `LockFile` creates an "unlocker" child-process that monitors
the main ngcc process and deletes the lock file if it exits unexpectedly.
This resolves the issue where the main process could not be killed by pressing
Ctrl-C at the terminal.
Fixes#35761
PR Close#35861
The previous implementation mixed up the management
of locking a piece of code (both sync and async) with the
management of writing and removing the lockFile that is
used as the flag for which process has locked the code.
This change splits these two concepts up. Apart from
avoiding the awkward base class it allows the `LockFile`
implementation to be replaced cleanly.
PR Close#35861
This reduces the time that `findEntryPoints` takes from 9701.143ms to 4177.278ms, by reducing the file operations done.
Reference: #35717
PR Close#35756
This reverts commit 00f3c58bb9.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
Using the --silent flag prevents the spammy logging messages in the
bazel execution logs.
```
INFO: From Bundling JavaScript packages/zone.js/dist/zone-rollup.umd.js [rollup]:
bazel-out/k8-fastbuild/bin/packages/zone.js/lib/browser/rollup-legacy-main.mjs → bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js...
created bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js in 736ms
```
PR Close#35835
It's an error to declare a variable twice on a specific template:
```html
<div *ngFor="let i of items; let i = index">
</div>
```
This commit introduces a template type-checking error which helps to detect
and diagnose this problem.
Fixes#35186
PR Close#35674
This is a follow up to #35637 which resolved a similar issue for `ComponentFactoryResolver`, but not the root cause. When a `NgModuleRef` is created, it instantiates an `Injector` internally which in turn resolves all of injector types. This can result in a circular call that results in an error, because the module is one of the injector types being resolved.
These changes work around the issue by allowing the constructor to run before resolving the injector types.
Fixes#35677.
Fixes#35639.
PR Close#35731
This patch is a follow-up patch to 35c9f0dc2f.
It changes the `computeStyle` function to handle situations where
non string based values are returned from `window.getComputedStyle`.
This situation usually ocurrs in Node-based test environments where
the element or `window.getComputedStyle` is mocked out.
PR Close#35810
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
The test libs should only be included in one jasmine_node_test
otherwise `bazel build //packages/language-service/...` would
end up running `feature_test` and `infra_test` twice.
PR Close#35816
`ɵɵgetInheritedFactory()` is called from generated code for a component which extends another class. This function is detected by Closure to have a side effect and is not able to tree shake the component as a result. Marking it with `noSideEffects()` tells Closure it can remove this function under the relevant tree shaking conditions.
PR Close#35769
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
This marks the function are "pure" and eligible to be tree shaken by Closure. Without this, initializing `ngDevMode` is considered a side effect which prevents this function from being tree shaken and also any component which calls it.
PR Close#35769
This is useful for propagating return values without them being converted to a string. It still provides the same guarantees to Closure, which will assume that the function invoked is pure and can be tree-shaken accordingly.
PR Close#35769
This commit performs a modularization of the Language Service's existing
diagnostic messages. Such a modularization has two primary advantages:
- Centralization and decoupling of error messages from the code that
generates them makes it easy to add/delete/edit diagnostic messages,
and allows for independent iteration of diagnostic messages and
diagnostic generation.
- Prepares for additional features like annotating the locations where a
diagnostic is generated and enabling the configuration of which
diagnostics should be reported by the language service.
Although it would be preferable to place the diagnostics registry in an
independent JSON file, for ease of typing diagnostic types as an enum
variant of 'ts.DiagnosticCategory', the registry is stored as an object.
Part of #32663.
PR Close#35678
Before this change ngIvy implementation of queries would throw upon
encountering null / undefined query result collected from an embedded
view. It turns out that we might have a provider that explicitly provides
a null / undefined value in a place of a token queried for.
This commit removes a check from the ngIvy query implementation that was
asserting on a query result to be defined.
Fixes#35673
PR Close#35796
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
Prior to this patch, the `margin` and `padding` properties were not
detected properly by Firefox due to them being shorthand properties.
This patch ensures that both `margin` and `padding` are converted
read as `top right bottom left` in the event that the shorthand
property detection fails for auto-styling in Angular animations.
Fix#35463 (FW-1886)
PR Close#35701
Pete Bacon Darwin
Joey Perrott
Andrew Kushnir
Paul Gschwendtner
Matias Niemelä
crisbeto
Ayaz Hafiz
George Kalpakas
Greg Magolan
Alison Gale
JoostK
Terence D. Honles
Andrew Scott
Sonu Kapoor
Martin Sikora
Alex Rickabaugh
Keen Yee Liau
JiaLiPassion
Judy Bogart
ivanwonder
Stanislav Usov
Keen Yee Liau
Alan Agius
Ayaz Hafiz
Mikel Ward
Wagner Maciel
Pawel Kozlowski
Filipe Silva
danranVm
Misko Hevery
Alex Eagle
Joey Perrott
Santosh Yadav
Yiting Wang
Doug Parker