Scripts provided in the `ng-dev` command might use local `git`
commands. For such scripts, we keep track of the branch that
has been checked out before the command has been invoked.
We do this so that we can later (upon command completion)
restore back to the original branch. We do not want to
leave the Git repository in a dirty state.
It looks like this logic currently only deals with branches
but does not work properly when a command is invoked from
a detached head. We can make it work by just checking out
the previous revision (if no branch is checked out).
PR Close#37737
As reported in #37699, the size of the main angular.io bundle sometimes
ends up bigger than expected on CI. This usually goes away after
rerunning the job a couple of times.
It is unclear what is causing this. In order to help debug the issue,
this commit stores the JS files that are checked as part of the aio
payload-size check as CI artifacts, where they can be retrieved from and
inspected.
PR Close#37703
Adds the publishConfig registry value to the package.json of the
@angular/benchpress package to publish it via wombat rather than
through npm directly.
PR Close#37752
I was using schematics with the `--name` parameter instead of the `--project`, I did both ways before sending and my suspicion about outdated documentation was confirmed
PR Close#37681
Addresses small typos such as extra whitespaces.
This change was extracted from #29505.
This change was extracted from #29505.
This change was extracted from #29505.
PR Close#37753
This commit disables all diagnostic tests for DynamicValue diagnostics which
make assertions about the diagnostic filename while running tests on Windows.
Such assertions are currently suffering from a case sensitivity issue.
PR Close#37763
The deployment to aio is currently failing because #37721 introduced
"project" entry into the firebase.json which means that we now need to
select the deployment target before deploying to firebase.
This change fixes the issue and refactors the file to be easier to read.
I also added extra echo statements so that the CI logs are easier to
read in case we need to troubleshoot future issues.
PR Close#37762
Several partial_evaluator tests in the diagnostics_spec check assert
correctness of diagnostic filenames. Previously these assertions compared
a resolved (`absoluteFrom`) filename with the TypeScript `ts.SourceFile`'s
`fileName` string, which caused the tests to fail on Windows because the
drive letter case differed.
This commit changes the assertions to use `absoluteFromSourceFile` instead
of the `fileName` string, resulting in an apples-to-apples comparison of
canonicalized paths.
PR Close#37758
This typo caused the script to fail on Linux (interestingly it works fine on Mac).
This is a painful reminder that we should not write any more Bash scripts EVER. shelljs FTW! :-)
PR Close#37754
Currently when bootstrapped component is being removed using `ComponentRef.destroy` or `NgModuleRef.destroy` methods, DOM nodes may be retained in the DOM tree. This commit fixes that problem by always attaching host element of the internal root view to the component's host view node, so the cleanup can happen correctly.
Resolves#36449.
PR Close#37600
In version 10.0.0-next.8, we introduced absolute URL support for
server-based HTTP requests, so long as the fully-resolved URL was
provided in the initial config. However, doing so represents a
breaking change for users who already have their own interceptors
to model this functionality, since our logic executes before all
interceptors fire on a request. See original PR #37071.
Therefore, we introduce a flag to make this change consistent with
v9 behavior, allowing users to opt in to this new behavior. This
commit also fixes two issues with the previous implementation:
1. if the server was initiated with a relative URL, the absolute
URL construction would fail because needed components were empty
2. if the user's absolute URL was on a port, the port would not
be included
PR Close#37539
As of v10, the `undecorated-classes-with-decorated-fields` migration
generally deals with undecorated classes using Angular features. We
intended to run this migation as part of v10 again as undecorated
classes with Angular features are no longer supported in planned v11.
The migration currently behaves incorrectly in some cases where an
`@Injectable` or `@Pipe` decorated classes uses the `ngOnDestroy`
lifecycle hook. We incorrectly add a TODO for those classes. This
commit fixes that.
Additionally, this change makes the migration more robust to
not migrate a class if it inherits from a component, pipe
injectable or non-abstract directive. We previously did not
need this as the undecorated-classes-with-di migration ran
before, but this is no longer the case.
Last, this commit fixes an issue where multiple TODO's could be
added. This happens when multiple Angular CLI build targets have
an overlap in source files. Multiple programs then capture the
same source file, causing the migration to detect an undecorated
class multiple times (i.e. adding a TODO twice).
Fixes#37726.
PR Close#37732
This commit introduces a dedicated `DynamicValue` kind to indicate that a value
cannot be evaluated statically as the function body is not just a single return
statement. This allows more accurate reporting of why a function call failed
to be evaluated, i.e. we now include a reference to the function declaration
and have a tailor-made diagnostic message.
PR Close#37587
During AOT compilation, the value of some expressions need to be known at
compile time. The compiler has the ability to statically evaluate expressions
the best it can, but there can be occurrences when an expression cannot be
evaluated statically. For instance, the evaluation could depend on a dynamic
value or syntax is used that the compiler does not understand. Alternatively,
it is possible that an expression could be statically evaluated but the
resulting value would be of an incorrect type.
In these situations, it would be helpful if the compiler could explain why it
is unable to evaluate an expression. To this extend, the static interpreter
in Ivy keeps track of a trail of `DynamicValue`s which follow the path of nodes
that were considered all the way to the node that causes an expression to be
considered dynamic. Up until this commit, this rich trail of information was
not surfaced to a developer so the compiler was of little help to explain
why static evaluation failed, resulting in situations that are hard to debug
and resolve.
This commit adds much more insight to the diagnostic that is produced for static
evaluation errors. For dynamic values, the trail of `DynamicValue` instances
is presented to the user in a meaningful way. If a value is available but not
of the correct type, the type of the resolved value is shown.
Resolves FW-2155
PR Close#37587
Previously, an anonymous type was used for creating a diagnostic with related
information. The anonymous type would then be translated into the necessary
`ts.DiagnosticRelatedInformation` shape within `makeDiagnostic`. This commit
switches the `makeDiagnostic` signature over to taking `ts.DiagnosticRelatedInformation`
directly and introduces `makeRelatedInformation` to easily create such objects.
This is done to aid in making upcoming work more readable.
PR Close#37587
Commit 4213e8d5 introduced shim reference tagging into the compiler, and
changed how the `TypeCheckProgramHost` worked under the hood during the
creation of a template type-checking program. This work enabled a more
incremental flow for template type-checking, but unintentionally introduced
several regressions in performance, caused by poor incrementality during
`ts.Program` creation.
1. The `TypeCheckProgramHost` was made to rely on the `ts.CompilerHost` to
retrieve instances of `ts.SourceFile`s from the original program. If the
host does not return the original instance of such files, but instead
creates new instances, this has two negative effects: it incurs
additional parsing time, and it interferes with TypeScript's ability to
reuse information about such files.
2. During the incremental creation of a `ts.Program`, TypeScript compares
the `referencedFiles` of `ts.SourceFile` instances from the old program
with those in the new program. If these arrays differ, TypeScript cannot
fully reuse the old program. The implementation of reference tagging
introduced in 4213e8d5 restores the original `referencedFiles` array
after a `ts.Program` is created, which means that future incremental
operations involving that program will always fail this comparison,
effectively limiting the incrementality TypeScript can achieve.
Problem 1 exacerbates problem 2: if a new `ts.SourceFile` is created by the
host after shim generation has been disabled, it will have an untagged
`referencedFiles` array even if the original file's `referencedFiles` was
not restored, triggering problem 2 when creating the template type-checking
program.
To fix these issues, `referencedFiles` arrays are now restored on the old
`ts.Program` prior to the creation of a new incremental program. This allows
TypeScript to get the most out of reusing the old program's data.
Additionally, the `TypeCheckProgramHost` now uses the original `ts.Program`
to retrieve original instances of `ts.SourceFile`s where possible,
preventing issues when a host would otherwise return fresh instances.
Together, these fixes ensure that program reuse is as incremental as
possible, and tests have been added to verify this for certain scenarios.
An optimization was further added to prevent the creation of a type-checking
`ts.Program` in the first place if no type-checking is necessary.
PR Close#37641
Previously the `ProgramBasedEntryPointFinder` was parsing all the
entry-points referenced by the program for dependencies even if all the
entry-points had been processed already.
Now this entry-point finder will re-use the `EntryPointManifest` to load
the entry-point dependencies when possible which avoids having to parse
them all again, on every invocation of ngcc.
Previously the `EntryPointManifest` was only used in the
`DirectoryWalkerEntryPointFinder`, which also contained the logic for
computing the contents of the manifest. This logic has been factored out
into an `EntryPointCollector` class. Both the `ProgramBasedEntryPointFinder`
and `DirectoryWalkerEntryPointFinder` now use the `EntryPointManifest` and
the `EntryPointCollector`.
The result of this change is that there is a small cost on the first run of
ngcc to compute and store the manifest - the processing takes 102% of the
processing time before this PR. But on subsequent runs there is a
significant benefit on subsequent runs - the processing takes around 50%
of the processing time before this PR.
PR Close#37665
The integration test for i18n now makes use of the new extraction tooling
from the `@angular/localize` package rather than the old ViewEngine extractor.
PR Close#32912
This tool, which can be run from the node_modules bin folder, can parse
the source files in your compiled app and generate a translation file
formatted with the configured syntax.
For example:
```
./node_modules/.bin/localize-extract -s 'dist/**/*.js' -f xliff1 -o dist/messages.en.xlf
```
PR Close#32912
Previously source locations required an ending position but this was not
being computed effectively. Now ending position is optional and it is
computed from an `endPath` passed to `getLocation()`.
PR Close#32912
Source-maps can be linked to from a source-file by a comment at
the end of the file.
Previously the `SourceFileLoader` would read
the first comment that matched `//# sourceMappingURL=` but
this is not valid since some bundlers may include embedded
source-files that contain such a comment.
Now we only look for this comment in the last non-empty line
in the file.
PR Close#32912
Previously localized strings were not mapped to their original
source location, so it was not possible to back-trace them
in tools like the i18n message extractor.
PR Close#32912
Webpack and other build tools sometimes inline the contents of the
source files in their generated source-maps, and at the same time
change the paths to be prefixed with a protocol, such as `webpack://`.
This can confuse tools that need to read these paths, so now it is
possible to provide a mapping to where these files originated.
PR Close#32912
This method will allow us to find the original location given a
generated location, which is useful in fine grained work with
source-mapping. E.g. in `$localize` tooling.
PR Close#32912
This commit uses the correct component (`HeroesComponent`) in the.
`MessageService`. Previously, the `MessageService` was using
`HeroeService`.
Closes#37654
PR Close#37666
v9.angular.io was used to pilot the firebase hosting multisites setup for angular.io.
The deployments so far have been done manually to control the deployment process.
This change, automates the deployment for v9.angular.io so that future deployments can be made from
the CI.
See https://angular-team.atlassian.net/browse/DEV-125 for more info.
In the process of updating the scripts I rediscovered a bug in the deploy-to-firebase.sh script that
incorrect compared two numbers as strings. This previously worked correctly because we were comparing
single digit numbers. With the release of v10, we now compare 9 > 10 which behaves differently for
strings and numbers. The bug was fixed by switching to an arithmetic comparison of the two variables.
This bug has been fixed on the master branch but not on the 9.1.x branch. I realized this during the
rebase, but found my version to be a bit cleaner, so I kept it.
PR Close#37721
Date pipe is giving wrong week number when used with the date format 'w'. If first week(according to Iso) has some days in previous year
Fixes#33961
PR Close#37632
Previously, `registerOnChange` used `hasOwnProperty` to identify if the
property is supported. However, this does not work as the `selectedOptions`
property is an inherited property. This commit fixes this by verifying
the property on the prototype instead.
Closes#37433
PR Close#37620
introduce a boolean to track form groups/arrays own pending async validation to distinguish between pending state due to children and pending state due to own validation
Fixes#10064
PR Close#22575
Value of "undefined" passed as segment in routerLink is stringified to string "undefined".
This change introduces the same behavior for value of "null".
PR Close#32616
When using the routerLinkActive directive inside a component that is using ChangeDetectionStrategy.OnPush and lazy loaded module routes the routerLinkActive directive does not update after clicking a link to a lazy loaded route that has not already been loaded.
Also the OnPush nav component does not set routerLinkActive correctly when the default route loads, the non-OnPush nav component works fine.
regression caused by #15943closes#19934
PR Close#21411
* add a param called ng_assets to the component_benchmark macro to allow static assets to be provided to the base angular app, not just through the ts_devserver
PR Close#37695
This commit adds the support schedule for v10.
v10.0.0 was released on June 24, 2020.
Active support ends six months later, on Dec 24, 2020.
Long term support ends a year after that, on Dec 24, 2021.
PR Close#37745
Previously, dev-infra approval (via PullApprove) was required for all
.bazel files in the monorepo, including those in packages/compiler-cli.
The compiler-cli package is a little special in this sense:
* it's not shipped to NPM in the APF
* it uses lots of internal subpackages to organize and test its code
As a result:
* changes to compiler-cli BUILD.bazel files are not user visible and
don't have larger implications for the packages published to NPM,
unlike changes to other BUILD.bazel files in the repo
* the requirement for dev-infra approval for BUILD.bazel changes is
overly burdensome, because compiler-cli build files change more
rapidly than those of other packages.
This commit exempts the compiler-cli's build files from the requirement
for dev-infra approval. It will be sufficient for such files to be
approved by the normal compiler reviewers.
PR Close#37558
Updates the version of `@angular/benchpress` to the next patch
version. i.e. `v0.2.1`. Additionally, the peer dependency
on `@angular/core` has been updated to be satisifed with
Angular v10 and v11.
Benchpress should be at least compatibe with the next two major
versions as it does not rely on any deprecated API from `@angular/core`.
PR Close#37676
Removes unused packages from the benchpress `package.json`. That
helps with deduping dependencies, and avoiding unused code
being downloaded.
PR Close#37676
Leverage the caretaker note label configuration in ng-dev's merge
tooling to prompt the caretaker for confirmation when a PR has
the `PR action: merge-assistance` label. This should help to
surface for the caretaker, PRs which may need additional steps
taken, announcement messaging, etc.
PR Close#37675
The file-writing error in the this commit can also be the result
of the ngcc process dying in the middle of writing files.
This commit improves the error message to offer a resolution
in case this is the reason for the error.
Fixes#36393
PR Close#37672
Error message mention that ngModel and ngModelChange will be removed in Angular v7 but right not now sure when it will be removed so changed it to a future version
PR Close#37643
Api search functionality only had unit tests @gkalpak suggested we should have some e2e tests too. Added some end to end tests.
Fixes#35170
PR Close#37612
Mostly just adding links to the migrations that were missing, adding the migrations into the navbar,
as well as correcting the @angular/bazel removal in the update guide.
I also added a commented out preamble for the release notes.
PR Close#37705
adds new DI technique recommendation for libraries to ensure tree-shaking for unused services
includes reasons for packaging schematics with libraries, clarify schematic usage recommendation
PR Close#36144
This adds documentation for the v10.0 tooling migration `update-module-and-target-compiler-options` contained within the `@schematics/angular` package.
PR Close#37429
Paul Gschwendtner
George Kalpakas
Joey Perrott
Gui Seek
Edric Chan
Alex Rickabaugh
Igor Minar
Andrew Kushnir
Adam
JoostK
Pete Bacon Darwin
Sonu Kapoor
Dmitrij Kuba
Ajit Singh
Oussama Ben Brahim
Krzysztof Grzybek
Anas Barghoud
Manduro
Wagner Maciel
Keen Yee Liau
Trung Vo
Joey Perrott
kuncevic
Misko Hevery
Judy Bogart
Charles Lyding