As part of the commit message conformance check, local commit message checks are
made to be warnings rather than failures. An additional local option is also in
place to allow for the commit message validation failures to be considered errors
instead.
PR Close#38784
When type-checking a component, the declaring NgModule scope is used
to create a directive matcher that contains flattened directive metadata,
i.e. the metadata of a directive and its base classes. This computation
is done for all components, whereas the type-check scope is constant per
NgModule. Additionally, the flattening of metadata is constant per
directive instance so doesn't necessarily have to be recomputed for
each component.
This commit introduces a `TypeCheckScopes` class that is responsible
for flattening directives and computing the scope per NgModule. It
caches the computed results as appropriate to avoid repeated computation.
PR Close#38539
For the compilation of a component, the compiler has to prepare some
information about the directives and pipes that are used in the template.
This information includes an expression for directives/pipes, for usage
within the compilation output. For large NgModule compilation scopes
this has shown to introduce a performance hotspot, as the generation of
expressions is quite expensive. This commit reduces the performance
overhead by only generating expressions for the directives/pipes that
are actually used within the template, significantly cutting down on
the compiler's resolve phase.
PR Close#38539
Currently we validate the configuration file on each `getConfig`
invocation. We can only validate once since the configuration
is cached.
Also while being at it, renames the cache variables to lower-case as those
do not represent constants (which are convention-wise upper case).
PR Close#38808
This commit creates a sample router test application to introduce the
symbol tests. It serves as a guard to ensure that any future work on the
router package does not unintentionally increase the payload size.
PR Close#38714
Recent work on compiler internals in #38539 led to an unexpected failure,
where a pipe used exclusively inside of an ICU would no longer be
emitted into the compilation output. This caused runtime errors due to
missing pipes.
The issue occurred because the change in #38539 would determine the set
of used pipes up-front, independent from the template compilation using
the `R3TargetBinder`. However, `R3TargetBinder` did not consider
expressions within ICUs, so any pipe usages within those expressions
would not be detected. This fix unblocks #38539 and also concerns
upcoming linker work, given that prelink compilations would not go
through full template compilation but only `R3TargetBinder`.
PR Close#38810
Close#38584
In zone.js 0.11.1, the `types` field is missing in the `package.json`,
the reason is in zone.js 0.11.0, the `files` field is used to specify the
types, but it cause the npm package not contain any bundles issue, so zone.js
0.11.1 remove the `files` field, which cause the `type` definition gone.
This PR concat the `zone.js.d.ts`, `zone.configurations.api.ts`, `zone.api.extensions.ts`
types into a single `zone.d.ts` file.
PR Close#38585
To discourage developers from mutating the arrays returned
from the following methods, their return types have been marked
as readonly.
* `getLocaleDayPeriods()`
* `getLocaleDayNames()`
* `getLocaleMonthNames()`
* `getLocaleEraNames()`
Fixes#27003
BREAKING CHANGE:
The locale data API has been marked as returning readonly arrays, rather
than mutable arrays, since these arrays are shared across calls to the
API. If you were mutating them (e.g. calling `sort()`, `push()`, `splice()`, etc)
then your code will not longer compile. If you need to mutate the array, you
should now take a copy (e.g. by calling `slice()`) and mutate the copy.
PR Close#30397
In a microsyntax expressions, some attributes are not bound after
desugaring. For example,
```html
<div *ngFor="let item of items">
</div>
```
gets desugared to
```html
<ng-template ngFor let-items [ngForOf]="items">
</ngtemplate>
```
In this case, `ngFor` should be a literal attribute with no RHS value.
Therefore, its source span should be just the `keySpan` and not the
source span of the original template node.
This allows language service to precisely pinpoint different spans in a
microsyntax to provide accurate information.
PR Close#38766
Adds `TemplateTypeChecker` operation to retrieve the `Symbol` of a
`TmplAstVariable` or `TmplAstReference` in a template.
Sometimes we need to traverse an intermediate variable declaration to arrive at
the correct `ts.Symbol`. For example, loop variables are declared using an intermediate:
```
<div *ngFor="let user of users">
{{user.name}}
</div>
```
Getting the symbol of user here (from the expression) is tricky, because the TCB looks like:
```
var _t0 = ...; // type of NgForOf
var _t1: any; // context of embedded view for NgForOf structural directive
if (NgForOf.ngTemplateContextGuard(_t0, _t1)) {
// _t1 is now NgForOfContext<...>
var _t2 = _t1.$implicit; // let user = '$implicit'
_t2.name; // user.name expression
}
```
Just getting the `ts.Expression` for the `AST` node `PropRead(ImplicitReceiver, 'user')`
via the sourcemaps will yield the `_t2` expression. This function recognizes that `_t2`
is a variable declared locally in the TCB, and actually fetch the `ts.Symbol` of its initializer.
These special handlings show the versatility of the `Symbol`
interface defined in the API. With this, when we encounter a template variable,
we can provide the declaration node, as well as specific information
about the variable instance, such as the `ts.Type` and `ts.Symbol`.
PR Close#38618
Adds support to the `TemplateTypeChecker` to get a `Symbol` of an AST
expression in a component template.
Not all expressions will have `ts.Symbol`s (e.g. there is no `ts.Symbol`
associated with the expression `a + b`, but there are for both the a and b
nodes individually).
PR Close#38618
Adds support to the `TemplateTypeChecker` for retrieving a `Symbol` for
`TmplAstTemplate` and `TmplAstElement` nodes in a component template.
PR Close#38618
Specifically, this commit adds support for retrieving a `Symbol` from a
`TmplAstBoundEvent` or `TmplAstBoundAttribute`. Other template nodes
will be supported in following commits.
PR Close#38618
The statements generated in the TCB are optimized for performance and producing diagnostics.
These optimizations can result in generating a TCB that does not have all the information
needed by the `TemplateTypeChecker` for retrieving `Symbol`s. For example, as an optimization,
the TCB will not generate variable declaration statements for directives that have no
references, inputs, or outputs. However, the `TemplateTypeChecker` always needs these
statements to be present in order to provide `ts.Symbol`s and `ts.Type`s for the directives.
This commit adds logic to the TCB generation to ensure the required
information is available in a form that the `TemplateTypeChecker` can
consume. It also adds an option to the `NgCompiler` that makes this
generation configurable.
PR Close#38618
This commit defines the interfaces which outline the information the
`TemplateTypeChecker` can return when requesting a Symbol for an item in the
`TemplateAst`.
Rather than providing the `ts.Symbol`, `ts.Type`, etc.
information in several separate functions, the `TemplateTypeChecker` can
instead provide all the useful information it knows about a particular
node in the `TemplateAst` and allow the callers to determine what to do
with it.
PR Close#38618
Currently, the `DatePipe` (via `formatDate()`) rounds fractions of a millisecond to the
nearest millisecond. This can cause dates that are less than a millisecond before midnight
to be incremented to the following day.
The [ECMAScript specification](https://www.ecma-international.org/ecma-262/5.1/#sec-15.9.1.11)
defines that `DateTime` milliseconds should always be rounded down, so that `999.9ms`
becomes `999ms`.
This change brings `formatDate()` and so `DatePipe` inline with the ECMAScript
specification.
Fixes#37989
BREAKING CHANGE:
When passing a date-time formatted string to the `DatePipe` in a format that contains
fractions of a millisecond, the milliseconds will now always be rounded down rather than
to the nearest millisecond.
Most applications will not be affected by this change. If this is not the desired behaviour
then consider pre-processing the string to round the millisecond part before passing
it to the `DatePipe`.
PR Close#38009
Some lower level APIs are used by CLI, and requiring
the `formatOpions` argument at that level is a
breaking change. This commit makes it optional
at every level to avoid the breaking change.
PR Close#38787
The `RefreshTransplantedView` flag is used to indicate that the view or one of its children
is transplanted and dirty, so it should still be refreshed as part of change detection.
This flag is set on the transplanted view itself as well setting a
counter on as its parents.
When a transplanted view is detached and still has this flag, it means
it got detached before it was refreshed. This can happen for "backwards
references" or transplanted views that are inserted at a location that
was already checked. In this case, we should decrement the parent
counters _and_ clear the flag on the detached view so it's not seen as
"transplanted" anymore (it is detached and has no parent counters to
adjust).
fixes#38619
PR Close#38768
This commit adds `ngDevMode` guard to throw some errors only in dev mode
The ngDevMode flag helps to tree-shake these error messages from production
builds (in dev mode everything will work as it works right now) to decrease
production bundle size.
PR Close#38674
This change contains the test from #38780 and also removes `defer` from
the `apply_redirects` logic because the change that introduced
`concatMap` instead of `map`...`concatAll` makes `defer` unnecessary.
PR Close#38781
This commit improves the error thrown by the downgrade module with a more
descriptive message on why the downgrade is failing.
Closes#37579
PR Close#38671
As not all users, particularly contributors consistently contributing with a deep
understanding of our commit message guidelines, will not want to rely on the
commit message wizard, we allow a user to opt out of using this wizard during
commit message creation.
PR Close#38701
Create a utility for loading a local user configuration object to describe
local configuration values, such as skipping the commit message wizard.
PR Close#38701
Previously, the validateCommitMessage function ran validation and logged the results.
The validateCommitMessage function now returns an object containing the validation
results and the cli action functions are instead responsible for logging the results.
This is being done as a prefactor for a change which allows for commit message
hook validation to be either a blocking error or a warning.
PR Close#38703
In the test project there are no longer reference markers and location
markers, so there's no need to "pre-process" the source files to remove
them. This will make the Ivy tests cleaner and faster.
PR Close#38777
Add the new podcast called The Deep Dive to the list of Podcast resources.
Also replace the name and URL for Angular inDepth as the old URL is deprecated.
PR Close#37621
Joey Perrott
santoshyadavdev
JoostK
Paul Gschwendtner
George Kalpakas
Sonu Kapoor
Pete Bacon Darwin
Wagner Maciel
JiaLiPassion
Artem Halas
Andrew Scott
David Shevitz
Keen Yee Liau
Ajit Singh
gilboom
Kapunahele Wong
atscott
thekiba
Lars Gyrup Brink Nielsen
Popov Max
Alain Chautard
Kuzivakwashe