Enforces a requirement that all PR commit messages contain a body
of at least 100 characters. This is meant to encourage commits
within the repo to be more descriptive of each change.
PR Close#36632
Previously, the commit message body regex only matched the first line
of the body. This change corrects the regex to match the entire line.
PR Close#36632
Currently, if changes are made to `compiler-cli/ngcc` and to other
compiler-related files, then only the `fw-ngcc` group is requested
for review. This is because the `not contains_any_globs` condition
will be false for `fw-compiler` and the group will never become active.
We fix this by removing the incorrect condition and filtering out ngcc
files before checking `contains_any_globs` in the primary fw-compiler
condition.
PR Close#36661
Currently, when verifying our pullapprove configuration, we don't
respect modifications to the set of files in a condition.
e.g. It's not possible to do the following:
```
contains_any_globs(files.exclude(...), [
```
This prevents us from having codeowner groups which match a directory,
but want to filter out specific sub directories. For example, `fw-core`
matches all files in the core package. We want to exclude the schematics
from that glob. Usually we do this by another exclude condition.
This has a *significant* downside though. It means that fw-core will not
be requested if a PR changes schematic code, _and_ actual fw-core code.
To support these conditions, the pullapprove verification tool is
refactored, so that it no longer uses Regular expressions for parsing,
but rather evaluates the code through a dynamic function. This is
possible since the conditions are written in simple Python that can
be run in NodeJS too (with small modifications/transformations).
PR Close#36661
This was originally fixed in #35976, but one of the window.scrollY
assertions was missed. Also updated tests to use toBeGreater/LessThan
to improve failure messages.
PR Close#36742
This PR adds test case to cover a failure that was detected after
merging #36302. That commit will be reverted and will need a new PR that
does not cause this test to fail.
PR Close#36699
This commit update the PullApprove config to add AndrewKushnir to the `fw-testing` group. The reason for this change is that I was involved into TestBed rewrite (for Ivy) and it belongs to the `fw-testing` group ownership.
PR Close#36744
Moves the circular deps golden for packages into a subfolder of goldens,
`/goldens/circular-deps/` to more easily target the files for
ownership.
PR Close#36630
Bumping the version of benchpress as a new version needs to be released
as part of the effort to set up more benchmarking accross the
angular/angular and angular/components repos.
PR Close#36457
Previously, our process included running the pre-check script before
releasing. With our new publishing process this was dropped. This
change adds in automatically executing this check before publish for
both next and latest
PR Close#36527
Previously, we only displayed the new `$localize` id, which is not
currently what most people have in their translation files.
Until people migrate to the new message id system it is confusing
not to display the legacy ids.
PR Close#36761
Upgrading @bazel/bazelisk to version 1.4.0 as this introduces the
bazel binary. This prevents the need to have a `bazel` script defined
in package.json to point to `bazelisk`, instead it is just available
on install.
PR Close#36729
Currently the commit message and corresponding version are flipped, which makes it hard to review the changes. This commit updates the script to properly recognize the order of arguments.
PR Close#36749
Updating `REQUIRED_BASE_SHA` for master and patch branches to make sure PRs that we merge are rebased after `commit-message` validation script update (to make sure the `lint` CI job fails in case a PR contains commits with invalid commit messages).
PR Close#36750
When module overrides (via `TestBed.overrideModule`) are present, it might affect all modules that import (even transitively) an overridden one. For all affected modules we need to recalculate their scopes for a given test run and restore original scopes at the end. Prior to this change, we were recalculating module scopes only for components that are used in a test, without taking into account module hierarchy. This commit updates Ivy TestBed logic to calculate all potentially affected modules are reset cached scopes information for them (so that scopes are recalculated as needed).
Resolves#36619.
PR Close#36649
Prior to this commit unbound attributes were treated as possible inputs to structural directives. Since structural directives can only accepts inputs defined using microsyntax expression (e.g. `<div *dir="exp">`), such unbound attributes should not be considered as inputs. This commit aligns Ivy and View Engine behavior and avoids using unbound attributes as inputs to structural directives.
PR Close#36441
Based on the migration guide, provided classes which don't have
either `@Injectable`, `@Directive`, `@Component` or `@Pipe` need
to be migrated.
This is not correct as provided classes with an `@NgModule` also
have a factory function that can be read by the r3 injector. It's
unclear in which cases the `@NgModule` decorator is used for
provided classes, but this scenario has been reported.
Either we fix this in the migration, or we make sure to report
this as unsupported in the Ivy compiler.
Fixes#35700.
PR Close#36369
link is very deep down on architecture page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36565
This commit fixes an issue where adding `fixup` commits was triggering a lint error. The problem was caused by the fact that we used the entire message body while checking whether `fixup` commit has a corresponding "parent" commit in a range. This issue was found after enforcing a check that exits the process if there is an invalid commit message found (4341743b4a).
PR Close#36733
link is very deep down on acessibility page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36561
Currently the `commit-message` validation script does not exit
with a non-zero exit code if the commit message validation failed.
This means that invalid commit messages are currently not
causing CI to be red. See: https://circleci.com/gh/angular/angular/686008
PR Close#36723
Version 7.0.0 is under LTS until 18-4-2020 removed it from the table which showed it as LTS and added to versions that are no longer under support.
PR Close#36708
The cached file-system was implemented to speed up ngcc
processing, but in reality most files are not accessed many times
and there is no noticeable degradation in speed by removing it.
Benchmarking `ngcc -l debug` for AIO on a local machine
gave a range of 196-236 seconds with the cache and 197-224
seconds without the cache.
Moreover, when running in parallel mode, ngcc has a separate
file cache for each process. This results in excess memory usage.
Notably the master process, which only does analysis of entry-points
holds on to up to 500Mb for AIO when using the cache compared to
only around 30Mb when not using the cache.
Finally, the file-system cache being incorrectly primed with file
contents before being processed has been the cause of a number
of bugs. For example https://github.com/angular/angular-cli/issues/16860#issuecomment-614694269.
PR Close#36687
The flag that determines whether something should be able to inject from `viewProviders` is opt-out and the pipes weren't opted out, resulting in them being able to see the viewProviders if they're placed on a component host node.
Fixes#36146.
PR Close#36512
Previously, when a document included `_`, the autoLinker will try to
generate a link, e.g from `core/ɵComponentDef._`. This commit adds it
to the ignored words to prevent that.
PR Close#36316
Previously, the auto linker generated links without an `href` when the
API was private. This commit fixes this by making sure that the `path`
of the document is not empty.
Closes#36260
PR Close#36316
Previously our CI during the setup process has made requests
to the Github API to determine the target branch and shas.
With this change, this information is now determined via git
commands using pipeline parameters from CircleCI.
PR Close#36500
Joey Perrott
Paul Gschwendtner
Santosh Yadav
Andrew Scott
Annie Wang
Pete Bacon Darwin
Andrew Kushnir
Judy Bogart
Matias Niemelä
ajitsinghkaler
Sonu Kapoor
木杉
crisbeto
Tony Bove