When determining whether to run an animation, the `TransitionAnimationPlayer`
checks to see if a DOM element is attached to the document. This is done by
checking to see if the element is "contained" by the document body node.
Previously, if the element was inside a shadow DOM, the engine would
determine that the element was not attached, even if the shadow DOM's
host was attached to the document. This commit updates the `containsElement()`
method on `AnimationDriver` implementations to also include shadow DOM
elements as being contained if their shadow host element is contained.
Further, when using CSS keyframes to trigger animations, the styling
was always added to the `head` element of the document, even for
animations on elements within a shadow DOM. This meant that those
elements never receive those styles and the animation would not run.
This commit updates the insertion of these styles so that they are added,
to the element's "root node", which is the nearest shadow DOM host, or the
`head` of the document if the element is not in a shadow DOM.
Closes#25672
PR Close#40134
With this change we update several dependencies to avoid Renovate creating a lot of PRs during onboarding. We also remove yarn workspaces as after further analysis these are not needed.
Certain dependencies such as `@octokit/rest`, `remark` and `@babel/*` have not been updated as they require a decent amount of work to update, and it's best to leave them for a seperate PR.
PR Close#41434
This instruction was created to work around a problem with injecting a
`ChangeDetectorRef` into a pipe. See #31438. This fix required special
metadata for when the thing being injected was a `ChangeDetectorRef`.
Now this is handled by adding a flag `InjectorFlags.ForPipe` to the
`ɵɵdirectiveInject()` call, which avoids the need to special test_cases
`ChangeDetectorRef` in the generated code.
PR Close#41231
With this change we move `XhrFactory` to the root entrypoint of `@angular/commmon`, this is needed so that we can configure `XhrFactory` DI token at a platform level, and not add a dependency between `@angular/platform-browser` and `@angular/common/http`.
Currently, when using `HttpClientModule` in a child module on the server, `ReferenceError: XMLHttpRequest is not defined` is being thrown because the child module has its own Injector and causes `XhrFactory` provider to be configured to use `BrowserXhr`.
Therefore, we should configure the `XhrFactory` at a platform level similar to other Browser specific providers.
BREAKING CHANGE:
`XhrFactory` has been moved from `@angular/common/http` to `@angular/common`.
**Before**
```ts
import {XhrFactory} from '@angular/common/http';
```
**After**
```ts
import {XhrFactory} from '@angular/common';
```
Closes#41311
PR Close#41313
A long-requested feature for HttpClient is the ability to store and retrieve
custom metadata for requests, especially in interceptors. This commit
implements this functionality via a new context object for requests.
Each outgoing HttpRequest now has an associated "context", an instance of
the HttpContext class. An HttpContext can be provided when making a request,
or if not then an empty context is created for the new request. This context
shares its lifecycle with the entire request, even across operations that
change the identity of the HttpRequest instance such as RxJS retries.
The HttpContext functions as an expando. Users can create typed tokens as instances of HttpContextToken, and
read/write a value for the key from any HttpContext object.
This commit implements the HttpContext functionality. A followup commit will
add angular.io documentation.
PR Close#25751
The custom elements spec is not compatible with ES5 style classes. This
means ES2015 code compiled to ES5 will not work with a native
implementation of Custom Elements. To support browsers that natively
support Custom Elements but not ES2015 modules, we load
`@webcomponents/custom-elements/src/native-shim.js`, which minimally
augments the native implementation to be compatible with ES5 code.
(See [here][1] for more details.)
Previously, the shim was included in `polyfills.ts`, which meant it was
loaded in all browsers (even those supporting ES2015 modules and thus
not needing the shim).
This commit moves the shim from `polyfills.ts` to a `nomodule` script
tag in `index.html`. This will ensure that it is only loaded in browsers
that do not support ES2015 modules and thus do not needed the shim.
NOTE:
This commit also reduces size of the polyfills bundle by ~400B
(52609B --> 52215B).
[1]: https://www.npmjs.com/package/@webcomponents/custom-elements#es5-vs-es2015
PR Close#41162
In the new behavior Angular cleanups `popstate` and `hashchange` event listeners
when the root view gets destroyed, thus event handlers are not added twice
when the application is bootstrapped again.
BREAKING CHANGE:
Methods of the `PlatformLocation` class, namely `onPopState` and `onHashChange`,
used to return `void`. Now those methods return functions that can be called
to remove event handlers.
PR Close#31546
PR Close#40867
This commit updates the Angular framework, Angular CDK/Material and
Angular CLI to latest stable versions (11.2.3, 11.2.2 and 11.2.2
respectively).
This update also fixes a Lighthouse audit fail due to
`@angular/core@11.0.0` being identified as vulnerable to XSS:
https://snyk.io/vuln/SNYK-JS-ANGULARCORE-1070902
Regarding the payload size increases, they are mostly attributed to
Angular Material:
- Before this commit: 448461 B
- After framework update: 448554 B ( +93 B)
- After Material update: 449292 B (+738 B)
- After CLI update: 449310 B ( +18 B)
PR Close#40994
Currently the only way to disable animations is by providing the `NoopAnimationsModule`
which doesn't allow for it to be disabled based on runtime information. These changes
add support for disabling animations based on runtime information by using
`BrowserAnimationsModule.withConfig({disableAnimations: true})`.
PR Close#40731
Currently `NgTemplateOutlet` recreates its view if its template is swapped out or a context
object with a different shape is passed in. If an object with the same shape is passed in,
we preserve the old view and we mutate the previous object. This mutation of the original
object can be undesirable if two objects with the same shape are swapped between two
different template outlets.
The current behavior is a result of a limitation in `core` where the `context` of an embedded
view is read-only, however a previous commit made it writeable.
These changes resolve the context mutation issue and clean up a bunch of unnecessary
logic from `NgTemplateOutlet` by taking advantage of the earlier change.
Fixes#24515.
PR Close#40360
This commit adds `ngDevMode` guard to show the warning only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake the warning from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#40876
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
The injector system uses a bloom filter to determine if a token is
possibly defined in the node injector tree, which is stored across
multiple bloom buckets that each represent 32 bits of the full 256-bit
wide bloom hash. This means that a computation is required to determine
the exact bloom bucket which is responsible for storing any given 32-bit
interval, which was previously computed using three bitmask operations
and three branches to derive the bloom bucket offset.
This commit exploits the observation that all bits beyond the low 5 bits
of the bloom hash are an accurate representation for the bucket offset,
if shifted right such that those bits become the least significant bits.
This reduces the three bitmask operations and three branches with a
single shift operation, while additionally offering a code size
improvement.
PR Close#40489
Previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail and it should not be the thing which determines
how often change event should fire.
This change introduces a new `emitDistinctChangesOnly` option for
`ContentChildren` and `ViewChildren`.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option will become the default in the future
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
PR Close#40091
Differs tries to inject parent differ in order to support extending.
This does not work in the 'root' injector as the provider overrides the
default injector. The fix is to just assume standard set of providers
and extend those instead.
PR close#25015
Issue close#11309 `Can't extend IterableDiffers`
Issue close#18554 `IterableDiffers.extend is not AOT compatible`
(This is fixed because we no longer have an arrow function in the
factory but a proper function which can be imported.)
PR Close#39981
This commit adds `ngDevMode` guard to run `checkNoChanges` only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake this code from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
Occasionally, the SW would end up in a broken state where some of the
eagerly cached resources of an older version were available in the local
cache, but others (such as lazy-loaded bundles) were not. This would
leave the app in a broken state and a blank screen would be displayed.
See #28114 for a more detailed discussion.
This commit takes advantage of the newly introduced (in v11)
[SwUpdate#unrecoverable][1] API to detect these bad states and recover
by doing a full page reload whenever an [UnrecoverableStateEvent][2] is
emitted.
Partially addresses #28114.
NOTE:
Currently, `SwUpdate.unrecoverable` only works if the app has already
bootstrapped; i.e. if only lazy-loaded bundles have been purged from the
cache.
That should be fine in practice, since the cache entries are removed in
least-recently-used order. Thus the eagerly loaded bundles will be the
last to be removed from the cache (which rarely happens in practice).
[1]: https://v11.angular.io/api/service-worker/SwUpdate#unrecoverable
[2]: https://v11.angular.io/api/service-worker/UnrecoverableStateEvent
PR Close#39651
Previously, the `LocationService` depended on the `SwUpdatesService`.
This felt backwards, since `LocationService` is a more low-level and
basic service and should not be depending on a service for a
higher-level, specific feature (ServiceWorkers).
This commit inverses the relation, making `SwUpdatesService` depend on
`LocationService` instead.
PR Close#39651
This commit updates `@angular/*` and `@angular/cli` (and related
packages) to version 11.0.0-rc.2. Apart from the automatic migrations,
this commit also tries to align `aio/` with new apps generated by the
latest CLI. (See [here][1] for a diff between a v10.1.3 and a
v11.0.0-rc.2 CLI app.)
[1]: https://github.com/cexbrayat/angular-cli-diff/compare/10.1.3...11.0.0-rc.2
PR Close#39600
Due to historical reasons `Injector.__NG_ELEMENT_ID__` was set to `-1`.
This changes it to be consistent with other `*Ref.__NG_ELEMENT_ID__`
constructs.
PR Close#39621
* Fixes that the Ivy styling logic wasn't accounting for `!important` in the property value.
* Fixes that the default DOM renderer only sets `!important` on a property with a dash in its name.
* Accounts for the `flags` parameter of `setStyle` in the server renderer.
Fixes#35323.
PR Close#39603
As with regular Angular components, Angular elements are expected to
have their views update when inputs change.
Previously, Angular Elements views were not updated if the underlying
component used the `OnPush` change detection strategy.
This commit fixes this by calling `markForCheck()` on the component
view's `ChangeDetectorRef`.
NOTE:
This is similar to how `@angular/upgrade` does it:
3236ae0ee1/packages/upgrade/src/common/src/downgrade_component_adapter.ts (L146).
Fixes#38948
PR Close#39452
adds RuntimeError and code enum to improve debugging experience
refactor ExpressionChangedAfterItHasBeenCheckedError to code NG0100
refactor CyclicDependency to code NG0200
refactor No Provider to code NG0201
refactor MultipleComponentsMatch to code NG0300
refactor ExportNotFound to code NG0301
refactor PipeNotFound to code NG0302
refactor BindingNotKnown to code NG0303
refactor NotKnownElement to code NG0304
PR Close#39188
The `ExpandoInstructions` was unnecessarily convoluted way to solve the
problem of calling the `HostBindingFunction`s on components and
directives. The code was complicated and hard to fallow.
The replacement is a simplified way to achieve the same thing, which
is also more efficient in space and speed.
PR Close#39301
Before this refactoring/fix the ICU would store the current selected
index in `TView`. This is incorrect, since if ICU is in `ngFor` it will
cause issues in some circumstances. This refactoring properly moves the
state to `LView`.
closes#37021closes#38144closes#38073
PR Close#39233
This commit updates the version of Angular Components used in angular.io
to version 10.2.2.
NOTE:
The actual size increase for the main bundle in ViewEngine mode is 1.3KB
(because the actual size before this commit was 430423B, not 430008B as
seen in `aio-payloads.json`).
PR Close#39017
This commit updates the version of Angular framework used in angular.io
to version 10.1.3.
NOTE:
The actual size decrease for the main bundle is 3KB (because the actual
size before this commit was 451226B, not 450952B as seen in
`aio-payloads.json`).
PR Close#39017
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Data in events page was hardcoded and it is manually moved in the table.
Created a new events widget which will automatically move past and upcoming
events from events.json (`aio/content/marketing/events.json`) file to the
relevant table in the events tab
PR Close#36517
Some specialised browsers that do not support scroll restoration
(e.g. some web crawlers) do not allow `scrollRestoration` to be
writable.
We already sniff the browser to see if it has the `window.scrollTo`
method, so now we also check whether `window.history.scrollRestoration`
is writable too.
Fixes#30629
PR Close#30630
Prior to this commit, duplicated styles defined in multiple components in the same file were not
shared between components, thus causing extra payload size. This commit updates compiler logic to
use `ConstantPool` for the styles (while generating the `styles` array on component def), which
enables styles sharing when needed (when duplicates styles are present).
Resolves#38204.
PR Close#38213
Default change detection fails in some cases for @angular/elements where
component events are called from the wrong zone.
This fixes the issue by running all ComponentNgElementStrategy methods
in the same zone it was created in.
Fixes#24181
PR Close#37814
Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#35464
This commit updates the version of Angular Components used in angular.io
to version 10.0.1. It also updates the angular.io app to adapt to
breaking changes.
PR Close#37898
This commit updates the version of Angular framework used in angular.io
to version 10.0.2. It also features a commit message with a 100+ chars
long body.
PR Close#37898
In #29083 a call to `getCompilerFacade` was added to `ApplicationRef` which pulls in a bit of JIT-specific code. Since the code path that calls the function can't be hit for an AOT-compiled app, these changes add an `ngJitMode` guard which will allow for dead code elimination to drop it completely. Testing it out against a new CLI project showed a difference of ~1.2kb.
PR Close#37372
As of TypeScript 3.9, the tsc emit is not compatible with Closure
Compiler due to
https://github.com/microsoft/TypeScript/pull/32011.
There is some hope that this will be fixed by a solution like the one
proposed in
https://github.com/microsoft/TypeScript/issues/38374 but currently it's
unclear if / when that will
happen.
Since the Closure support has been somewhat already broken, and the
tsickle pass has been a source
of headaches for some time for Angular packages, we are removing it for
now while we rethink our
strategy to make Angular Closure compatible outside of Google.
This change has no effect on our Closure compatibility within Google
which work well because all the
code is compiled from sources and passed through tsickle.
This change only disables the tsickle pass but doesn't remove it.
A follow up PR should either remove all the traces of tscikle or
re-enable the fixed version.
BREAKING CHANGE: Angular npm packages no longer contain jsdoc comments
to support Closure Compiler's advanced optimizations
The support for Closure compiler in Angular packages has been
experimental and broken for quite some
time.
As of TS3.9 Closure is unusable with the JavaScript emit. Please follow
https://github.com/microsoft/TypeScript/issues/38374 for more
information and updates.
If you used Closure compiler with Angular in the past, you will likely
be better off consuming
Angular packages built from sources directly rather than consuming the
version we publish on npm
which is primarily optimized for Webpack/Rollup + Terser build pipeline.
As a temporary workaround you might consider using your current build
pipeline with Closure flag
`--compilation_level=SIMPLE`. This flag will ensure that your build
pipeline produces buildable and
runnable artifacts, at the cost of increased payload size due to
advanced optimizations being disabled.
If you were affected by this change, please help us understand your
needs by leaving a comment on https://github.com/angular/angular/issues/37234.
PR Close#37221
With this changer we update the CLI size-tracking changes for uncompressed
main-es2015 file. This file is larger due to new emitted shape of
ES2015 classes in TypeScript 3.9, which are now wrapped in IIFE.
PR Close#36989
Alan Agius
jeripeierSBB
Pete Bacon Darwin
FDIM
George Kalpakas
arturovt
twerske
Kristiyan Kostadinov
Paul Gammans
Joey Perrott
JoostK
Misko Hevery
ajitsinghkaler
marcvincenti
Andrew Kushnir
remackgeek
Harri Lehtola
Igor Minar