Prior to this change in Ivy we had strict check that disabled non-unique #localRefs usage within a given template. While this limitation was technically present in View Engine, in many cases View Engine neglected this restriction and as a result, some apps relied on a fact that multiple non-unique #localRefs can be defined and utilized to query elements via @ViewChild(ren) and @ContentChild(ren). In order to provide better compatibility with View Engine, this commit removes existing restriction.
As a part of this commit, are few tests were added to verify VE and Ivy compatibility in most common use-cases where multiple non-unique #localRefs were used.
PR Close#28627
Currently external static symbols which are referenced by AOT
compiler generated code, will be re-exported in the corresponding
`.ngfactory` files.
This way of handling the symbol resolution has been introduced in
favor of avoding dynamically generated module dependencies. This
behavior therefore avoids any strict dependency failures.
Read more about a particular scenario here: https://github.com/angular/angular/issues/25644#issuecomment-458354439
Now with `ngtsc`, this behavior has changed since `ngtsc` just
introduces these module dependencies in order to properly reference
the external symbol from its original location (also eliminating the need
for factories). Similarly we should provide a way to use the same
behavior with `ngc` because the downside of using the re-exported symbol
resolution is that user-code transformations (e.g. the `ngInjectableDef`
metadata which is added to the user source code), can resolve external
symbols to previous factory symbol re-exports. This is a critical issue
because it means that the actual JIT code references factory files in order
to access external symbols. This means that the generated output cannot
shipped to NPM without shipping the referenced factory files.
A specific example has been reported here: https://github.com/angular/angular/issues/25644#issue-353554070
PR Close#28594
We need to support rendering in contexts like web workers where
nodes are emulated and properties may not be set directly. This
commit gates property validation checks to environments that have
real Node objects.
FW-1043 #resolve
PR Close#28610
It seems that in some cases (especially on CI), global state is not
cleaned up properly causing a specific test to fail.
See #28045 and #28181 for more context.
This PR restores the global state for the affected test. This partly
defeat the purpose of the test, but is better than having flakes on CI.
Fixes#28614
PR Close#28617
There is nothing browser specific in those tests and fakeAsync is supported on node.
Testing / debugging on node is often faster than on Karma.
PR Close#28593
The behavior tested here was fixed by #28537, but I missed updating
the test in the original PR. This commit turns on the test to run
in Ivy mode, using "onlyInIvy" because the timing of the error message
is slightly different and requires CD to run.
PR Close#28604
FileType objects are deprecated. They are not required for specifying valid file types for rule attributes, a list of strings can be used instead.
PR Close#28583
This commit adds a devMode-only check which will throw if a user
attempts to bind a property that does not match a directive
input or a known HTML property.
Example:
```
<div [unknownProp]="someValue"></div>
```
The above will throw because "unknownProp" is not a known
property of HTMLDivElement.
This check is similar to the check executed in View Engine during
template parsing, but occurs at runtime instead of compile-time.
Note: This change uncovered an existing bug with host binding
inheritance, so some Material tests had to be turned off. They
will be fixed in an upcoming PR.
PR Close#28537
Prior to this change we only checked whether current lView has a next pointer while traversing tNode tree. However in some cases this pointer can be undefined and we need to look up parents chain to find suitable next pointer. This commit adds the logic of searching for the next pointer taking parents chain into account.
PR Close#28533
In https://github.com/angular/angular/pull/27697 the listLazyRoutes was fixed to work with ivy.
Since the entryRoute argument is not supported, it was made to also error.
But by erroring it breaks existing usage with Angular CLI where the entry route is sent in as an argument.
This commit changes listLazyRoutes to not error out, but instead ignore the argument.
PR Close#28372
When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
Adds `--no-sandbox` in order to disable the sandbox when running Protractor through Bazel. Enabling the sandbox causes Chrome to crash under certain environments.
PR Close#28557
Note that this allows Angular to depend on the entirety of the ES2015 API, not just our restricted subset.
This change is needed because our copy of the subset was out-of-date, and prevents us using ES2015 target in dev mode.
This is a subset of #27738
PR Close#28570
`LView` `HOST` was set in most cases right after creating `LView`.
This makes the API cleaner by explicitly passing it ont `createLView`.
PR Close#28461
If RAW_PERFLOG_PATH is passed in as an option, benchpress saves chrome's
performance log to a json file. This allows developers to download the
json file and upload it to their browser to get a breakdown of chrome-side
resource usage during a test.
PR Close#27551
When we first started writing tests for Ivy, we did not yet have a
compatible compiler. For this reason, we set up the Ivy runtime tests
to run with generated code that we wrote by hand (instead of real code
generated by the compiler).
Now that we have a working Ivy compiler and TestBed infrastructure
that is compatible with Ivy, we should start writing integration
tests that leverage them (no more handwritten generated code!). This
will prevent bugs where the compiler code and runtime code become
out of sync (which is easy if they are tested separately). And
eventually, we should migrate all the existing runtime tests in
"core/test/render3" to TestBed and ngtsc.
To kick off this effort, this commit migrates some existing tests
from "core/test/render3/exports_spec.ts" and saves them in a new file
with the same name in the "core/test/acceptance" folder.
PR Close#28534
i18n instructions create text nodes dynamically and save them between bindings and the expando block in `LView`. e.g., they try to create the following order in `LView`.
```
| -- elements -- | -- bindings -- | -- dynamic i18n text -- | -- expando (dirs, injectors) -- |
```
Each time a new text node is created, it is pushed to the end of the array and the `expandoStartIndex` marker is incremented, so the section begins slightly later. This happens in `allocExpando`.
This is fine if no directives have been created yet. The end of the array will be in the "dynamic text node" section.
| -- elements -- | -- bindings -- | -- dynamic i18n text -- |
However, this approach doesn't work if dynamic text nodes are created after directives are matched (for example when the directive uses host bindings). In that case, there are already directives and injectors saved in the "expando" section. So pushing to the end of `LView` actually pushes after the expando section. What we get is this:
```
| -- elements -- | -- bindings -- | -- dynamic i18n text -- | -- expando -- | -- dynamic i18n text-- |
```
In this case, the `expandoStartIndex` shouldn't be incremented because we are not inserting anything before the expando section (it's now after the expando section). But because it is incremented in the code right now, it's now pointing to an index in the middle of the expando section.
This PR fixes that so that we only increment the `expandoStartIndex` if nothing was pushed into the expando section.
FW-978 #resolve
PR Close#28424
Prior to this change there was no i18n id sanitization before we output goog.getMsg calls. Due to the fact that message ids are used as a part of const names, some characters were bcausing issues while executing generated code. This commit adds sanitization to i18n ids used to generate i18n-related consts.
PR Close#28522
Currently, DOM node removal called `removeChild` on the saved parent
node when destroying a component. However, this will fail if the
component has been manually moved in the DOM. This change makes the
removal always use the node's real `parentNode` and ignore the provided
`parent`.
PR Close#28455
Ivy allows Components to extend Directives (but not the other way around) and as a result we may have Component and Directive annotations present at the same time. The logic that resolves annotations to pick the necessary one didn't take this into account and as a result Components were recognized as Directives (and vice versa) in case of inheritance. This change updates the resolution logic by picking known annotation that is the nearest one (in inheritance tree) and compares it with expected type. That should help avoid mis-classification of Components/Directives during resolution.
PR Close#28439
The logic to create additional files needed for Bazel are currently
hosted in `ng new`. Such files include the main.*.ts files needed
for AOT and a different angular.json to use Bazel builder, among others.
This commit refactors the logic into `ng add` so that it can be used to
perform the same modifications in an existing project. Users could do so
by running `ng add @angular/bazel`.
With this change, `ng new` effectively becomes an orchestrator that runs
the original `ng new` followed by `ng add @angular/bazel`.
PR Close#28436
Note that this fixes `compiler-cli` tests within `compiler-cli/test`,
but there seem to be remaining `ngcc` tests within `compiler-cli/src`
which aren't working on Windows. This is out-of-scope for this commit.
PR Close#28352
Currently the "ngtsc` testing helpers resolve the `fake_core` NPM
package using the `TEST_SRCDIR` variable. This is problematic on Windows
where Bazel runfiles are not symlinked into the runfiles directory.
In order to properly resolve the NPM Bazel tree artifact, we use the
`resolveTreeNpmArtifact` runfile helper that properly resolves the artifact
properly on all platforms.
PR Close#28352
In order to support running "compiler-cli" tests that use the "test_support.ts"
utilities on Windows with Bazel, we need to imporve the logic that resolves NPM
packages and symlinks them into a temporary directory.
A more Bazel idiomatic and windows compatible way of resolving Bazel runfiles
is to use the "RUNFILES_MANIFEST" if present. This ensures that the NPM
packages can be also symlinked on Windows, and tests can execute properly
on Windows. Read more about why this is needed here:
* https://github.com/bazelbuild/bazel/issues/3726#issue-257062364
PR Close#28352
Since we recently removed the `test.sh` script, and now run
all tests with Bazel, we can remove the unused logic that makes
compiler-cli tests pass in non-Bazel.
This cleans up the tests, and also makes it easier to write tests
without worrying about two ways of the Angular package output
(Bazel `ng_package` rules vs. old `build.sh` logic of building)
PR Close#28352
Since we recently removed the `test.sh` script, and now run all
tests with Bazel, we can remove the unused logic that makes language-service
tests pass in non-Bazel.
This cleans up the tests, and also makes it easier to write tests
without worrying about two ways of the Angular package output
(Bazel `ng_package` rules vs. old `build.sh` logic of building)
PR Close#28352
Note that this allows Angular to depend on the entirety of the ES2015 API, not just our restricted subset.
This change is needed because our copy of the subset was out-of-date, and prevents us using ES2015 target in dev mode.
This is a subset of https://github.com/angular/angular/pull/27738
PR Close#28134
Improve the stacktrace for `R3Injector` errors by adding the source component (or module) that tried to inject the missing provider, as well as the name of the injector which triggered the error (`R3Injector`).
e.g.:
```
R3InjectorError(SomeModule)[car -> SportsCar]:
NullInjectorError: No provider for SportsCar!
```
FW-807 #resolve
FW-875 #resolve
PR Close#28207
createInjector() is an Ivy-only API that should not have
been exported as part of the public API. This commit removes
the export. It will be re-exported when Ivy is released.
PR Close#28509
Currently we depend on the "rules_webtesting" version that is
installed by "rules_typescript//:package.bzl". This version of
the webtesting rules comes with a very old version of Chromium
and the `chromedriver` that does not support capturing console
errors properly (with stack traces). Since we have a few e2e
tests that depend on console output (e.g. playground/src/source-map),
we need to make sure that these tests can pass upon Bazel
migration.
PR Close#28490
Fixes Ivy not passing thrown errors along to the `ErrorHandler`.
**Note:** the failing test had to be reworked a little bit, because it has some assertions that depend on an error context being logged, however Ivy doesn't keep track of the error context.
This PR resolves FW-840.
PR Close#28447
In Ivy, we support a new manual mode that allows for stricter control
over change detection in OnPush components. Specifically, in this mode,
events do not automatically mark OnPush views as dirty. Only changed
inputs and manual calls to `markDirty()` actually mark a view dirty.
However, this mode cannot be the default for OnPush components if we
want to be backwards compatible with View Engine. This commit re-adds
the legacy logic for OnPush components where events always mark views
dirty and makes it the default behavior.
Note: It is still TODO to add a public API for manual change detection.
PR Close#28474
Due to the fact that the test in 'ng_module_integration_spec.ts' relied on internal VE data structures (the '_def' field) to verify the state and the structure has changed in Ivy, this commit adds an Ivy version of the same test.
PR Close#28477
This commit fixes a bug in the Bazel builder in which the path to Bazel
executable is constructed using the project path. For non-default
project, the node_modules directory is actually one level above the
project path.
This PR fixes the bug by resolving node_modules with require.resolve().
It requires @bazel/bazel v0.22.1 because previous versions do not have
index.js or main field in package.json and would cause node module
resolution to fail.
This has been tested with both bazel and ibazel.
PR Close#28478
Previously, attempting to destroy a view with listeners more than once
throws an error during event listener cleanup. This happens because
`cleanup` field on the `TView` has already been cleared out by the time
the second destruction runs.
The `destroyed` flag on LView was previously being set in the `destroyLView` function,
but this flag was never _checked_ anywhere in the codebase. This commit
moves _setting_ this flag to the `cleanupView` function, just before
destroy hooks are called. This is necessary because the destroy hooks
can contain arbitrary user code, such as (surprise!) attempting to
destroy the view (again). We also add a check to `destroyLView` to skip
already-destroyed views. This prevents the cleanup code path from running twice.
PR Close#28413
This lets us run ngtsc under the tsc_wrapped custom compiler (Used in Bazel)
It also allows others to simply wire ngtsc into an existing typescript compilation binary
PR Close#28435
In View Engine, we supported @Input and @ContentChild annotations
on the same property. This feature was somewhat brittle because
it would only work for static queries, so it would break if a
content child was passed in wrapped in an *ngIf. Due to the
inconsistent behavior and low usage both internally and externally,
we will likely be deprecating it in the next version, and it does
not make sense to perpetuate it in Ivy.
This commit ensures that we now throw in Ivy if we encounter the
two annotations on the same property.
PR Close#28415
Prior to this change we didn't verify types passed to bootstrap as a part of NgModule semantics verification. Now we check whether all types passed to bootstrap are actually Components.
PR Close#28386
This commit updates the token used in fakeAsync test to the one available in both VE and R3 TestBeds. The goal of the test is to verify that fakeAsync works with inject function, so the actual token that is used for a test is irrelevant in that case. The logic to retrieve tokens from compiler injector (that the comment in "fixmeIvy" refers to) was implemented in PR #28196.
PR Close#28383
Prior to this change, generation of host bindings and host styles was guarded by the "if" statement, which always returned true. Enforcing more strict check for bindings length broke some tests, since host styling instructions generation were inside the same "if" block. This update decouples bindings instruction generation from styling instructions, which makes it less error prone.
PR Close#28379
Prior to this change we may encounter some errors (like pipes being used where they should not be used) while compiling Host Bindings and Listeners. With this update we move validation logic to the analyze phase and throw an error if something is wrong. This also aligns error messages between Ivy and VE.
PR Close#28356
Adds the information that the templateUrl and styleUrls options supports only relative Urls.
Adds more information about relative paths and absolute URLs in project metadata.
PR Close#27962
The TypeTranslatorVisitor visitor returned strings because before it wasn't possible to transform declaration files directly through the TypeScript custom transformer API.
Now that's possible though, so it should return nodes instead.
PR Close#28342
The current DtsFileTransformer works by intercepting file writes and editing the source string directly.
This PR refactors it as a afterDeclaration transform in order to fit better in the TypeScript API.
This is part of a greater effort of converting ngtsc to be usable as a TS transform plugin.
PR Close#28342
When testing whether `value` is an object, use the ideal sequence of
strictly not equal to `null` followed by `typeof value === 'object'`
consistently. Specifically there's no point in using double equal with
`null` since `undefined` is ruled out by the `typeof` check.
Also avoid the unnecessary ToBoolean check on `value.ngOnDestroy` in
`hasOnDestroy()`, since the `typeof value.ngOnDestroy === 'function'`
will only let closures pass and all closures are truish (with the
notable exception of `document.all`, but that shouldn't be relevant
for the `ngOnDestroy` hook).
PR Close#28400
Previously, these components were not added to the view tree for the
(fake) root view in which they were bootstrapped. Without this,
root view destruction does not work as expected since the root view's
children are not present to be also destroyed.
PR Close#28409
This lets us run ngtsc under the tsc_wrapped custom compiler (Used in Bazel)
It also allows others to simply wire ngtsc into an existing typescript compilation binary
PR Close#28431
This commit updates test that was added after Content Queries inheritance fix (that renames some instructions) was merged into master. The test used previous version of instructions, thus causing failures after merging Content Queries inheritance fix.
PR Close#28414
This lets us run ngtsc under the tsc_wrapped custom compiler (Used in Bazel)
It also allows others to simply wire ngtsc into an existing typescript compilation binary
PR Close#27806
* Improves the `compiler-cli/integrationtest` codegen output test slightly by using a more clear test description and by adding an assertion that ensures that decorators are downleveled.
PR Close#28191
* Fixes that the test logic for `ngtools` in the offline compiler test is no longer working due to being unmaintained for a long time
* Makes the path comparison logic platform agnostic, so that the tests can be also executed on Windows
PR Close#28191
Prior to this change contentQueriesRefresh functions that represent refresh logic for @ContentQuery list were not composable, which caused problems in case one Directive inherits another one and both of them contain Content Queries. Due to the fact that we used indices to reference queries in refresh function, results were placed into wrong Queries. In order to avoid that we no longer use indices to reference queries and instead maintain current content query index while iterating through them. This allows us to compose contentQueriesRefresh functions and make inheritance feature work with Content Queries.
PR Close#28324
Currently `compileNgModule` generates an empty array for optional fields that are omitted from an `NgModule` declaration (e.g. `bootstrap`, `exports`). This isn't necessary, because `defineNgModule` has some code to default these fields to empty arrays at runtime if they aren't defined. The following changes will only output code if there are values for the particular field.
PR Close#28387
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
In some cases, calling getSourceFile() on a node from within a TS
transform can return undefined (against the signature of the method).
In these cases, getting the original node first will work.
PR Close#28412
By its nature, Ivy alters the import graph of a TS program, adding imports
where template dependencies exist. For example, if ComponentA uses PipeB
in its template, Ivy will insert an import of PipeB into the file in which
ComponentA is declared.
Any insertion of an import into a program has the potential to introduce a
cycle into the import graph. If for some reason the file in which PipeB is
declared imports the file in which ComponentA is declared (maybe it makes
use of a service or utility function that happens to be in the same file as
ComponentA) then this could create an import cycle. This turns out to
happen quite regularly in larger Angular codebases.
TypeScript and the Ivy runtime have no issues with such cycles. However,
other tools are not so accepting. In particular the Closure Compiler is
very anti-cycle.
To mitigate this problem, it's necessary to detect when the insertion of
an import would create a cycle. ngtsc can then use a different strategy,
known as "remote scoping", instead of directly writing a reference from
one component to another. Under remote scoping, a function
'setComponentScope' is called after the declaration of the component's
module, which does not require the addition of new imports.
FW-647 #resolve
PR Close#28169
This commit implements a cycle detector which looks at the import graph of
TypeScript programs and can determine whether the addition of an edge is
sufficient to create a cycle. As part of the implementation, module name
to source file resolution is implemented via a ModuleResolver, using TS
APIs.
PR Close#28169
Builder for `@angular/bazel` schematics should not expect bazel/ibazel
to be on the PATH. It should instead invoke the local executable
installed by yarn/npm.
PR Close#28303
Users should be able to add Bazel workspace to an existing project.
The current approach assumes that the schematics is working on the same
tree as that of ng-new, which includes the top-level directory. Instead,
the schematic should work on the tree rooted at `appRoot` to enable
Bazel files to be added to existing project.
This change uses the newly implemented ScopedTree
a0ac4b0e3d
to achieve this.
NOTE: The version of `@angular-devkit/schematics` that is installed is
used to run the `@angular/bazel` schematic. Even if a different version
is used in the schematic itself, it has no effect.
Therefore, the *latest* Angular CLI should be used to generate the
files. As of this commit, the latest version is @angular/cli@7.3.0-rc.0
PR Close#28349
TestBed.compileComponents has always been an async API. However,
ViewEngine tolerated using this API in a synchronous manner if the
components declared in the testing module did not have any async
resources (templateUrl, styleUrls). This change makes the ivy TestBed
mirror this tolerance by configuring such components synchronously.
Ref: FW-992
PR Close#28350
ngcc's reflection host needs to be able to determine all members of a
class, which it does by using the `ts.Symbol` from TypeScript's
TypeChecker. Such Symbol however may represent multiple class members
in the case of accessors; an equally named getter/setter accessor pair
is combined into a single `ts.Symbol`.
This commit introduces logic to recognize such accessors in order for
both the getter and setter to be considered as class member, similar to
ngtsc's behavior when operating on original TypeScript code.
One difference wrt the TypeScript host is that ngcc cannot see to which
accessor originally had any decorators applied to them, as decorators
are applied to the property descriptor in general, not a specific accessor.
If an accessor has both a setter and getter, any decorators are only
attached to the setter member.
PR Close#28357
Prior to this change, accessor functions for getters and setters would
not be considered as class member, as their declaration is vastly
different from ES2015 syntax.
With this change, the ES5 reflection host has learned to recognize the
downleveled syntax for accessors, allowing for them to be considered as
class member once again.
Fixes#28226
PR Close#28357
yarn install was disabled in ng-new for Bazel schematics because
Bazel manages its own node_modules dependencies and therefore
there is no need to install dependencies twice.
However, the first yarn install is needed for `ng` commands to work,
most notably `ng build`.
This commit restores the original behavior.
PR Close#28381
This commit unifies handling of the "check no changes" mode between
ngIvy and the view engine. More specifically:
- check no changes can be invoked before change detection in ivy;
- `undefined` values are considered equal `NO_CHANGES` for the "check no changes"
mode purposes.
Chanes in this commit enables several tests that were previously running only in ivy
or only in the view engine.
PR Close#28366
Prior to this change the postprocess step relied on the order of placeholders combined in one group (e.g. [�#1�|�*1:1�]). The order is not guaranteed in case we have nested templates (since we use BFS to process templates) and some tags are represented using same placeholders. This change performs postprocessing more accurate by keeping track of currently active template and searching for matching placeholder.
PR Close#28209
Due to the fast moving nature of the Ivy codebase, the timing isn't
right to make changes to how errors and reported and handled during the
runtime.
Once ivy is stable this test should be revisted because that stage there
will be a better and more robust understanding of how ivy should recover
from runtime errors.
Jira Issue: FW-952
PR Close#28212
DebugElement.properties should contain a map of element
property names to element property values, with entries
for both normal property bindings and host bindings.
This commit adds support for property bindings in
DebugElement.properties (including interpolations).
PR Close#28355
DebugElement.properties should contain a map of element
property names to element property values, with entries
for both normal property bindings and host bindings.
Many Angular core tests depend on this map being present.
This commit adds support for host property bindings in
DebugElement.properties, which fixes the Angular core tests.
There is still work to be done for normal property bindings.
PR Close#28355
The value here is unimportant on initialization since it's not looked at until the second navigation. However, sometimes in testing the `Location` service is mocked out, or the Router constructor manually called. Assuming `Location` exists in the constructor leads to test failures in `google3` therefore we initialize to a value that will not cause errors.
PR Close#28376
animate functions now contain style functions instead of plain objects
e.g. animate(1s, { background: black }))
to animate(1s, style({ background: black }))
PR Close#28305
Previous to this change, we were storing view queries at the
wrong index. This is because we were passing a raw index to the
store() instruction instead of an adjusted index (i.e. an
index that does not include the HEADER_OFFSET). We had an
additional issue where TView.blueprint was not backfilled
when TView.data was backfilled, so new component instances
created from the blueprint would end up having a shorter LView.
Both of these problems together led to the Material demo app
failing with Ivy. This commit fixes those discrepancies.
PR Close#28327
Previously, bootstrapping a component with render3 would create a chained injector with the test bed ngModule instead of the ngModule that the component belongs to.
Now when a component belongs to an ngModule, we use that for the chained injector, ensuring the correct injection of any providers that this ngModule contains.
FW-776 #resolve
PR Close#28183
Fixes components with native content projection (using `<content>` or `<slot>`) not working under Ivy.
The issue comes from the fact that when creating elements inside a component, we sometimes don't append the element immediately, but we leave it to projection to move it into its final destination. This ends up breaking the native projection, because the slots have to be in place from the beginning. The following changes switch to appending the element immediately when inside a component with Shadow DOM encapsulation.
This PR resolves FW-841.
PR Close#28261
There are cases where we should check an element injector but don't go
into the associated module injector if a token is not found. In both the
view engine and ngIvy this is acheived by passing the
`NOT_FOUND_CHECK_ONLY_ELEMENT_INJECTOR` as the `notFoundValue`.
Before this fix the view engine and ngIvy were using different objects to
represent `NOT_FOUND_CHECK_ONLY_ELEMENT_INJECTOR`. This was causing problems
as ngUpgrade is using `NOT_FOUND_CHECK_ONLY_ELEMENT_INJECTOR` const in its
`NgAdapterInjector` to prevent searching of module injectors.
This commit makes sure that ngIvy is using the same object to represent
`NOT_FOUND_CHECK_ONLY_ELEMENT_INJECTOR` as the view engine.
PR Close#28313
Prior to this change `viewQuery` functions that represent @ViewQuery list were not composable, which caused problems in case one Component/Directive inherits another one and both of them contain View Queries. Due to the fact that we used indices to reference queries, resulting query set was corrupted (child component queries were overridden by super class ones). In order to avoid that we no longer use indices assigned at compile time and instead maintain current view query index while iterating through them. This allows us to compose `viewQuery` functions and make inheritance feature work with View Queries.
PR Close#28309
- Wraps the NgOnChangesFeature in a factory such that no side effects occur in the module root
- Adds comments to ngInherit property on feature definition interface to help guide others not to make the same mistake
- Updates compiler to generate the feature properly after the change to it being a factory
- Updates appropriate tests
PR Close#28187
This changes restores parity between VE TestBed and R3TestBed logic related to retrieving tokens using TestBed.get function. Now R3TestBed also tries to retrieve tokens from Compiler Injector.
PR Close#28196
Before this commit we were creating a "fake" TNode for each and every
projectable node passed during dynamic component creation. This approach
had several problems:
- the existing TView structure had to be mutated to accomodate new TNodes and
it was very easy to "corrupt" TView / TNode data structures;
- TNodes are not really needed to fully support projectable nodes so we were
creating objects and updating existing data structures for nothing.
This commit changes the approach so we don't create "fake" TNodes for projectable
nodes but instead we process projectable nodes directly in the projection instruction.
As a result we've got less code, less object allocation and - as a bonus - we fix few
bugs where TView / TNode data structures were corrupted when using projectable nodes.
PR Close#28275
Fixes the template generation function generating an incorrect tag name when the element has a namespace (e.g. `:svg:circle` gets generated rather than `circle`).
PR Close#28298
With #27680, a bug was fixed where multiple redirects using `eager` URL update could cause navigation to fail. However, that fix introduced a problem where with `skipLocationChange` enabled, the URL tree rendered was not properly stored for reference. This specifically caused an issue with named router outlets and subsequent navigations not being recognized.
This PR stores the correct `UrlTree` for reference with later navigations. It fixes the regression introdued with #27680.
Fixes#28200
PR Close#28300
Fixes Ivy not applying properties that are set in camelCase, because it goes through the `CSSStyleDeclaration` API via `setProperty` and `removeProperty` which requires for [the values to be in dash-case](https://developer.mozilla.org/en-US/docs/Web/API/CSSStyleDeclaration/setProperty).
**Note:** I opted to let the browser normalize the value, rather than convert it to dash-case during compile time, because there are some special cases like browser-prefixed properties where we might not normalize it in-line with the browser.
This PR fixes FW-579.
PR Close#28276
This commit uses the NgModuleRouteAnalyzer introduced previously to
implement listLazyRoutes() for NgtscProgram. Currently this implementation
is limited to listing routes globally and cannot list routes for a given lazy
module. Testing seems to indicate that the CLI uses the global form, but this
should be verified.
Jira issue: FW-629
PR Close#27697
This commit introduces a new mode for the NgtscTestEnvironment which
builds the NgtscProgram and then asks for the list of lazy routes,
instead of running the TS emit phase.
PR Close#27697
This commit introduces the NgModuleRouteAnalyzer & friends, which given
metadata about the NgModules in a program can extract the list of lazy
routes in the same format that the ngtools API uses.
PR Close#27697
This commit changes the partial evaluation mechanism to propagate
DynamicValue errors internally during evaluation, and not to "poison"
entire data structures when a single value is dynamic. For example,
previously if any entry in an array was dynamic, evaluating the entire
array would return DynamicValue. Now, the array is returned with only
the specific dynamic entry as DynamicValue.
Instances of DynamicValue also report the node that was determined to
be dynamic, as well as a potential reason for the dynamic-ness. These
can be nested, so an expression `a + b` may have a DynamicValue that
indicates the 'a' term was DynamicValue, which will itself contain a
reason for the dynamic-ness.
This work was undertaken for the implementation of listLazyRoutes(),
which needs to partially evaluate provider arrays, parts of which are
dynamic and parts of which contain useful information.
PR Close#27697
`ngtsc` currently fails building a flat module out file on Windows because it generates an invalid flat module TypeScript source file. e.g:
```ts
5 export * from './C:\Users\Paul\Desktop\test\src\export';
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
This is because `path.posix.relative` does not properly with non-posix paths, and only expects posix paths in order to work.
PR Close#27993
Previous to this change, the isStylingContext() function was improperly
returning true for LContainers because it used the presence of an array
at index 2 to determine whether it was a styling context. Unfortunately,
LContainers also contain arrays at index 2, so this would return a false
positive. This led to other errors down the line because we would treat
nodes with containers as if they already had styling contexts (even if
they did not), so the proper initialization logic for styling contexts
was not run.
This commit fixes the isStylingContext() function to use LCONTAINER_LENGTH
as a marker rather than the presence of an array, which in turn fixes
host bindings to styles on nodes with containers.
PR Close#28221
Resources can be loaded in the context of another file, which
means that the path to the resource file must be resolved
before it can be loaded.
Previously the API of this interface did not allow the client
code to get access to the resolved URL which is used to load
the resource.
Now this API has been refactored so that you must do the
resource URL resolving first and the loading expects a
resolved URL.
PR Close#28199
Destroys the module's injector when an `NgModule` is destroyed which in turn calls the `ngOnDestroy` methods on the instantiated providers.
This PR resolves FW-739.
PR Close#27793
Users might have run the CSS Preprocessor tool *before* the Angular
compiler. For example, we do it that way under Bazel. This means that
the design-time reference is different from the compile-time one - the
input to the Angular compiler is a plain .css file.
We assume that the preprocessor does a trivial 1:1 mapping using the same
basename with a different extension.
PR Close#28166
Due to the fact that animations in Angular are defined in the component metadata,
all animation trigger definitions are localized to the component and are
inaccessible outside of it. Animation host listeners in Ivy are
rendered in the context of the parent component, but the VE renders them
differently. This patch ensures that animation host listeners are
always registered in the sub component's renderer
Jira issue: FW-943
Jira issue: FW-958
PR Close#28210
The current build workflow depends on cross workspace dependency by
installing angular-cli as a Bazel repository. This is not ideal because
it introduces separate node_module directories other than the one
installed by Angular through the yarn_install rule (ngdeps).
This commit removes angular-cli from the Bazel workspace and installs
rollup and @angular-devkit/build-optimizer locally.
PR Close#28215
Prior to this fix Ivy would not execute any animation triggers
that exist as host bindings on an element if it is removed by
the parent template.
PR Close#28162
In Ivy when elements are created a series of static attribute names are provided
over to the construction instruction of that element. Static attribute names
include non-binding attribues (like `<div selected>`) as well as animation bindings
that do not have a RHS value (like `<div @foo>`). Because of this distinction,
value-less animation triggers are rendered first before value-full animation
bindings are and this improper ordering has caused various existing tests to fail.
This patch ensures that animation bindings are evaluated in the order that they
exist within the HTML template code (or host binding code).
PR Close#28165
With the refactoring or how styles/classes are implmented in Ivy,
interpolation has caused the binding code to mess up since interpolation
itself takes up its own slot in Ivy's memory management code. This patch
makes sure that interpolation works as expected with class and style
bindings.
Jira issue: FW-944
PR Close#28190
In VE the renderer.begin() and renderer.end() methods are only called
when CD is called on an element. This patch ensures that Ivy does the
same thing.
Jira issue: FW-945
PR Close#28192
When we look for matching annotations in TestBed, we should always take the last
matching annotation. Otherwise, we will return superclass data for subclasses,
which would have unintended consequences like directives matching the wrong selectors.
PR Close#28195
Initial thinking was that the bug is in the content projection logic but
it turned out to be a wrong assumption - hence adding a test to illustrate
that basic content projection of view containers works correctly.
What fails in the marked test is the logic quering debug nodes - content
peojection is fine but we never create the 'B' text node since we call
show() method on the "wrong" directive instance.
PR Close#28152
Fixes the `ModuleWithComponentFactories.componentFactories` not being populated when calling `compileModuleAndAllComponentsSync` in Ivy.
These changes resolve FW-929.
PR Close#28112
Prior to this change element's i18n attributes like "i18n-title" were processed after "i18n" ones that placed "i18n" and "i18nAttributes" instructions in wrong order, thus "i18nAttributes" failed to target its host element at runtime. This change updates processing order and puts "i18nAttributes" instructions in front of "i18n" ones to resolve the problem.
PR Close#28163
There were two issues with multiple ICU expressions in the same i18n block:
- the regexp that was used to parse the text wasn't able to handle multiple ICU expressions, I've replaced it with parsing the text and searching for brackets (which is what we ended up doing in the end anyway)
- we allocate node indexes for nodes generated by the ICU expressions which increases the expando value, but we would create the nodes for those cases during the update phase. In the mean time we would create some nodes during the creation phase (comment nodes for ICU expressions, text nodes, ...) with an auto increment index. This means that any node created after an ICU expression would get the following index value, but the ICU case nodes expected to use the same index as well... There was a mismatch between the auto generated index, and the expected index which was causing problems when we needed to select those nodes for updates later on. To fix it, I've added the expected node index to the list of mutate codes that we generate, and we do not use an auto increment value anymore.
FW-905 #resolve
PR Close#28083
The implementation of the `compileComponents` method for `TestBedRender3` was missing.
We now pass each component through `resolveComponentResources` when `TestBed.compileComponents` is called so that `templateUrl` and `styleUrls` can be resolved asynchronously and used once `TestBed.createComponent` is called.
The component's metadata are overriden in `TestBed` instead of mutating the original metadata like this is the case outside of TestBed. The reason for that is that we need to ensure that we didn't mutate anything so that the following tests can run with the same original metadata, otherwise we it could trigger or hide some errors.
FW-553 #resolve
PR Close#27778
Right now the `ServerRendererFactory2` creates a new instance of the
`DomElementSchemaRegistry` for each and every request, which is quite
costly (for the Tour of Heroes SSR this takes around **30%** of the
overall execution time). Since the schema is never modified, but only
used in a read-only fashion, it should be possible to re-use a single
instance instead.
Naive performance testing with 100 concurrent connections and 1000
requests in total shows an approximate **33%** improvement in Req/Sec
on the Tour of Heroes SSR example.
PR Close#28150
PR Close#28151
At the moment, paths stored in `maps` are not normalized and in Windows is causing files not to be found when enabling factory shimming.
For example, the map contents will be
```
Map {
'C:\\git\\cli-repos\\ng-factory-shims\\index.ngfactory.ts' => 'C:\\git\\cli-repos\\ng-factory-shims\\index.ts' }
```
However, ts compiler normalized the paths and is causing;
```
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngfactory.ts' not found.
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngsummary.ts' not found.
```
The changes normalized the paths that are stored within the factory and summary maps.
PR Close#28006
This code was throwing if the `deps` array of a provider has several elements, but at the next line it resolves them... With this check `ngtsc` couldn’t compile `ng-bootstrap` for example.
PR Close#28076
Throws a similar error to ViewEngine when encountering an `@Output` that hasn't been initialized to an `Observable`.
These changes resolve FW-680.
PR Close#28085
Up until this point, all static attribute values (things like `title` and `id`)
defined within the `host` are of a Component/Directive definition were
generated into a `def.attributes` array and then processed at runtime.
This design decision does not lend itself well to tree-shaking and is
inconsistent with other static values such as styles and classes.
This fix ensures that all static attribute values (attributes, classes,
and styles) that exist within a host definition for components and
directives are all assigned via the `elementHostAttrs` instruction.
```
// before
defineDirective({
...
attributes: ['title', 'my title']
...
})
//now
defineDirective({
...
hostBindings: function() {
if (create) {
elementHostAttrs(..., ['title', 'my-title']);
}
...
}
...
})
```
PR Close#28089
Angular allows for `<ng-content>` elements to include a selector which
filters which content-projected entries are inserted into the container
depending on whether or not the selector is matched.
With Ivy this feature has not fully worked due to the massive changes
that took place inside of Ivy's styling algorithm code (which is
responsible for assigning classes and styles to an element). This
fix ensures that content-projection can correctly identify which slot
an element should be placed into when class-based selectors are used.
PR Close#27849
This commit fixes a bug whereby a Bazel project created by the
schematics would not compiled if project contains routing module.
It is missing a dependency on the router package.
PR Close#28141
Fixes the `DebugNode.references` returning a reference to the underlying comment node, rather than the `TemplateRef` that the reference is pointing to. The issue comes from the fact that `discoverLocalRefs` falls back directly to returning the native node, if the ref isn't pointing to a directive, rather than looking through the locals.
These changes resolve FW-870.
PR Close#28101
When requesting a queries instance for a node, it was previously
decided whether it needs to be cloned if the node was not already marked
as hosting a query. This check is in place to have only a single queries
instance per node.
The issue with this approach is that no clone is created for subsequent
instantiations of a component, as the TNode is already marked as hosting
a query during first template pass, whereas the cloning of queries
should be independent of first template pass.
To overcome this issue, the queries are assigned an owner TNode such
that it can reliably be determined if a clone needs to be created.
PR Close#27892
This update fixes the way the @internal and @nocollapse annotations are used together, which produced errors while running it with Closure compiler. Now two annotations are a part of the same comment block.
PR Close#28138
* This is a follow-up to cd0451305a which fixes that "ngc-wrapped" from the "npm" workspace is always used if "angular" is fetched as an external dependency.
PR Close#28137
Prior to this change we performed prop and attr name validation at compile time, which failed in case a given prop/attr is an input to a Directive (thus should not be a subject to this check). Since Directive matching in Ivy happens at runtime, the corresponding checks are now moved to runtime as well.
PR Close#28054
With the update to TypeScript 3.2.x, a big issue seems to have appeared for downstream Bazel users. If the downstream user still uses a lower TypeScript version, normal Bazel targets using the `ng_module` rule are still compiled with the correct/old TypeScript version (assuming they set the `node_modules` attribute properly).
But, if they build the previous Bazel targets by specifying them within a `ng_package` rule, the TypeScript version from the Angular `workspace` is being used for the replayed ESM5 compilation. This is because we resolve the replay compiler to `ngc_wrapped` or `tsc_wrapped` Bazel executables which are defined as part of the `angular` workspace. This means that the compilers are different if the downstream user uses `ngc-wrapped` from the `@npm` repository because the replayed compilation would use the compiler with `@ngdeps//typescript`.
In order to fix this, we should just use the compiler that is defined in the `@angular//BUILD.bazel` file. This target by defaults to the "@npm" workspace which is working for downstream users. This is similar to how it is handled for `tsc-wrapped`. `tsc-wrapped` works as expected for downstream users.
**Note**: This is not the ideal solution because ideally we would
completely respect the `compiler` option from the base `ng_module`, but
this is not possible in a hermetic way, unless we somehow accept the
`compiler` as an attribute that builds all transitive deps. This is
something we should explore in the future. For now, we just fix this in
a reasonable way that is also used for `tsc_wrapped` from the TypeScript
rules.
PR Close#28053
index.html needs to have the zone.js and the project bundle injected
using script tags. This used to be done explicitly by specifying a
new index.html but with `web_package` rule introduced in rules_nodejs,
it is now possible to perform the injection dynamically.
PR Close#27995
This change is a prerequasity for a later change which will turn the
'di' into its own bazel package. In order to do that we have to:
- have `Injector` type be importable by Ivy. This means that we need
to create `Injector` as a pure type in `interface` folder which is
already a bazel package which Ivy can depend on.
- Remove the dependency of `class Injector` on Ivy so that it can be
compiled in isolation. We do that by using `-1` as special value for
`__NG_ELEMENT_ID__` which tells the Ivy `NodeInjector` than
`Injector` is being requested.
PR Close#28066
Incremental rebuilds is a fundamental part of the development
workflow. `@bazel/ibazel` should be added to the dev dependencies
of a Bazel project.
PR Close#28090
This update aligns Ivy behavior with ViewEngine related to empty bindings (for example <div [someProp]></div>): empty bindings are ignored.
PR Close#28059
__NG_ELEMENT_ID__ static fields are a part of how the Ivy node injector
works. In order to survive closure minification correctly, they need to
be annotated with @nocollapse.
PR Close#28050
ngtsc has a hack to add @nocollapse jsdoc annotations to generated static
fields. This hack is currently broken (likely due to a TypeScript change
in the way writeFile() works).
This commit fixes the hack and introduces an ngtsc_spec test to ensure it
does not regress again.
PR Close#28050
When an @NgModule decorator executes, the module is added to a queue in
render3/jit/module.ts. Reading an ngComponentDef property causes this queue
to be flushed, ensuring that the component gets the correct module scope
applied.
In before_each.ts, a global beforeEach is added to all Angular tests which
calls TestBed.resetTestingModule() prior to running each test. This in turn
clears the module compilation queue (which is correct behavior, as modules
declared within the test should not leak outside of it via the queue).
So far this is okay. But before the first test runs, the module compilation
queue is full of modules declared in global scope. No definitions have been
read, so no flushes of the queue have been triggered. The global beforeEach
triggers a reset of the queue, aborting all of the in-progress global
compilation, breaking those classes when they're later used in tests.
This commit adds logic to TestBedRender3 to respect the state of the module
queue before the TestBed is first initialized or reset. The queue is flushed
prior to such an operation to ensure global compilation is allowed to finish
properly.
With this fix, a platform-server test now passes (previously the <my-child>
element was not detected as a component, because the encompassing module
never finished compilation.
FW-887 #resolve
PR Close#28033
Previously when testing code injected the Compiler, it received the
top-level Compiler implementation defined in linker/compiler.ts
(and governed by the __PRE_R3__ switch). Code running under the
TestBed, however, should always use a TestBed-aware Compiler
implementation.
This commit adds such an implementation to the TestBedRender3,
which passes compiled modules through the _compileNgModule()
function.
With this change, 3 formerly disabled router integration tests
now pass.
FW-855 #resolve
PR Close#28033
An @NgModule with invalid provider declarations produces errors under
normal circumstances. However, within the TestBed two small issues with
provider overrides interfered with the correct production of these errors:
1. a 'null' provider object caused a premature crash when the TestBed
attempted to check for a 'provide' property on it with hasOwnProperty().
2. the array of providers would have an empty override array appended to it
for each input provider, which would pollute the error messages produced
down the line.
This commit fixes both of these issues, by 1) checking for null and 2)
filtering out the empty override arrays.
Testing strategy: future commits change the way the TestBed compiles
modules, causing tests to become sensitive to this bug if not fixed.
PR Close#28033
An @NgModule with an 'id' property has its type registered in a global map
of modules by id. This happens during compilation of the module.
In Ivy, modules are first compiled when the @NgModule decorator executes.
In tests, they might be passed again through the TestBed's compiler,
resulting in a second compilation and registration.
Before this fix, this second registration would cause an error, as the id
was previously registered. This commit makes the registration idempotent,
so if the same module type is being registered for the same id then no
error is thrown.
Testing strategy: future commits change the way the TestBed compiles
modules, causing tests to become sensitive to this bug if not fixed.
PR Close#28033
In ESM5 decorated classes can be indicated by calls to `__decorate()`.
Previously the `ReflectionHost.findDecoratedClasses()` call would identify
helper calls of the form:
```
SomeClass = tslib_1.__decorate(...);
```
But it was missing calls of the form:
```
SomeClass = SomeClass_1 = tslib_1.__decorate(...);
```
This form is common in `@NgModule()` decorations, where the class
being decorated is referenced inside the decorator or another
member.
This commit now ensures that a chain of assignments, of any length,
is now identified as a class decoration if it results in a call to
`__decorate()`.
Fixes#27841
PR Close#27848
* Interface that a class can implement to be a guard deciding if a children can be loaded.
'...if a children...' changed to '...if children...'
* Interface that a class can implement to be a guard deciding if children can be loaded.
PR Close#27894
Previously, we had the logic to schedule a change detection tick
inside markViewDirty(). This is fine when used in markDirty(),
the user-facing API, because it should always schedule change
detection. However, this doesn't work when used in markForCheck()
because historically markForCheck() does not trigger change
detection.
To be backwards compatible, this commit moves the scheduling
logic out of markViewDirty() and into markDirty(), so
markForCheck no longer triggers a tick.
PR Close#28048
Libraries that create components dynamically using component factories,
such as `@angular/upgrade` need to pass blocks of projected content
through to the `ComponentFactory.create()` method. These blocks
are extracted from the content by matching CSS selectors defined in
`<ng-content select="..">` tags found in the component's template.
The Angular compiler collects these CSS selectors when compiling a component's
template, and exposes them via the `ComponentFactory.ngContentSelectors`
property.
This change ensures that this property is filled correctly when the
component factory is created by compiling a component with the Ivy engine.
PR Close#27867
When a pipe returns an instance of WrappedValue we should "invalidate" value
of a binding where the pipe in question is used.
Before this change we've always wrtten the invalidation value (NO_CHANGE) to
the binding root this invalidating the first binding in a LView. This commit
corrects the binding index calculation so the binding with a pipe is invalidated.
PR Close#28044
Previous to this change, there was a lot of noise when
trying to find tests in FIND_PASSING_TESTS mode because
tests marked "onlyInIvy" were also listed as "already
passing". Since these tests are not "fixmes" that need
to be enabled, it is not useful to have them listed.
This commit removes "onlyInIvy" tests from consideration
when running in this manual mode. The tests should still
run on CI by default (since FIND_PASSING_TESTS mode will
be false).
PR Close#28036
There are various e2e tests with the `_spec.ts` suffix in the Angular project. Currently the protractor Bazel rule does not pick up these files and just ignores them. Since underscore is commonly used, we should support this.
Needed for the conversion fo the `examples` to Bazel.
PR Close#28022
Prior to this change Component decorator was resolving `encapsulation` value a bit incorrectly, which resulted in `encapsulation: NaN` in compiled code. Now we resolve the value as Enum memeber and throw if it's not the case. As a part of this update, the `changeDetection` field handling is also added, the resolution logic is the same as the one used for `encapsulation` field.
PR Close#27971
exportAs in @Directive metadata supports multiple values, separated by
commas. Previously it was treated as a single value string.
This commit modifies the compiler to understand that exportAs is a
string[]. It stops short of carrying the multiple values through to the
runtime. Instead, it only emits the first one. A future commit will modify
the runtime to accept all the values.
PR Close#28001
Generated factory shims can import from @angular/core. However, we have
special logic in place to rewrite self-imports when generating code for
@angular/core.
This commit leverages the new standalone ImportRewriter interface to
properly rewrite imports in generated factory shims. Before this fix,
a generated factory file for core would look like:
```typescript
import * as i0 from './r3_symbols';
export var ApplicationModuleNgFactory = new ɵNgModuleFactory(...);
```
This is invalid, as ɵNgModuleFactory is just NgModuleFactory when imported
via r3_symbols.
FW-881 #resolve
PR Close#27998
Currently the ImportManager class handles various rewriting actions of
imports when compiling @angular/core. This is required as code compiled
within @angular/core cannot import from '@angular/core'. To work around
this, imports are rewritten to get core symbols from a particular file,
r3_symbols.ts.
In this refactoring, this rewriting logic is moved out of the ImportManager
and put behind an interface, ImportRewriter. There are three implementers
of the interface:
* NoopImportRewriter, used for compiling all non-core packages.
* R3SymbolsImportRewriter, used when ngtsc compiles @angular/core.
* NgccFlatImportRewriter, used when ngcc compiles @angular/core (special
logic is needed because ngcc has to rewrite imports in flat bundles
differently than in non-flat bundles).
This is a precursor to using this rewriting logic in other contexts besides
the ImportManager.
PR Close#27998
Project created by @angular/cli depends on Bazel at build time and
we should not assume that Bazel is available globally.
Instead, the project should specify an explicit dev dependency on
`@bazel/bazel`.
PR Close#28032
TestBed used to have its own implementation of the `transitiveScopesFor` function, customized for TestBed needs (to compile NgModules). This change unifies the `transitiveScopesFor` function usage by importing it from the `jit/module.ts` script and adding extra argument to configure its behavior (how to compile NgModule), so that TestBed can leverage it.
PR Close#27860
These tests validate the ability of the View Engine TestBed to consume
summary metadata, a mechanism which allows the TestBed to use
AOT-compiled components & directives in tests. It achieves this through
two operations which are independently obsolete in Ivy:
1. It injects CompileMetadataResolver, a View Engine specific compiler
internal class which extracts global analysis metadata from classes,
and uses it to construct summary metadata. This happens in a
beforeEach() block which calls createSummaries().
2. It uses TestBed.initTestEnvironment to pass summary metadata to the
TestBed itself. Any such metadata is ignored in Ivy.
Operation #1 makes it impossible to run these tests under Ivy, as the
CompileMetadataResolver is not available with an Ivy compiler.
Ivy itself does not rely on summary data, and the R3TestBed can depend
directly on AOT compiled components without it. Thus, the spirit of thes
tests is obsolete in an Ivy world.
FW-838 #resolve
PR Close#28027
Previously the canInsertNativeNode and getRenderParent functions had almost
_exaclty_ the same logic. What was worse that getRenderParent was calling
canInsertNativeNode thus executing the same, non-trivial logic twice.
This commit merges canInsertNativeNode and getRenderParent into one function.
Now getRenderParent will return a native parent or null if a node can't be
inserted (content projection, root of a view that is not inserted etc.).
PR Close#28011
Previously presence and type of a parent tNode was split among
canInsertNativeNode, canInsertNativeChildOfView and canInsertNativeChildOfElement.
This commit centralises the logic in canInsertNativeNode thus simplifying
the overall logic and making canInsertNativeChildOfElement trivial.
PR Close#28011
Instead of relying on implicit dependencies through Angular, the WORKSPACE
of the project should explicitly add rules_nodejs and rules_typescript so
it can better control the versions.
PR Close#28000
A constructor function may have been "synthesized" by TypeScript during
JavaScript emit, in the case no user-defined constructor exists and e.g.
property initializers are used. Those initializers need to be emitted
into a constructor in JavaScript, so the TypeScript compiler generates a
synthetic constructor.
This commit adds identification of such constructors as ngcc needs to be
able to tell if a class did originally have a constructor in the
TypeScript source. When a class has a superclass, a synthesized
constructor must not be considered as a user-defined constructor as that
prevents a base factory call from being created by ngtsc, resulting in a
factory function that does not inject the dependencies of the superclass.
Hence, we identify a default synthesized super call in the constructor
body, according to the structure that TypeScript emits.
PR Close#27897
* Fixes that the flat module out files do not have a proper AMD module name on Windows. This is currently blocking serving a `ng_module` using the Bazel TypeScript `devserver` on Windows.
PR Close#27839
The problem that `fixmeIvy`s refer to is resolved, but the tests are still broken due to other issue (not possible to retrieve host property bindings for DebugElement).
PR Close#28003
This commit adds sanitization for `elementProperty` and `elementAttribute` instructions used in `hostBindings` function, similar to what we already have in the `template` function. Main difference is the fact that for some attributes (like "href" and "src") we can't define which SecurityContext they belong to (URL vs RESOURCE_URL) in Compiler, since information in Directive selector may not be enough to calculate it. In order to resolve the problem, Compiler injects slightly different sanitization function which detects proper Security Context at runtime.
PR Close#27939
Previously, ngtsc would assume that a given directive/pipe being imported
from an external package was importable using the same name by which it
was declared. This isn't always true; sometimes a package will export a
directive under a different name. For example, Angular frequently prefixes
directive names with the 'ɵ' character to indicate that they're part of
the package's private API, and not for public consumption.
This commit introduces the TsReferenceResolver class which, given a
declaration to import and a module name to import it from, can determine
the exported name of the declared class within the module. This allows
ngtsc to pick the correct name by which to import the class instead of
making assumptions about how it was exported.
This resolver is used to select a correct symbol name when creating an
AbsoluteReference.
FW-517 #resolve
FW-536 #resolve
PR Close#27743
This commit adds tracking of modules, directives, and pipes which are made
visible to consumers through NgModules exported from the package entrypoint.
ngtsc will now produce a diagnostic if such classes are not themselves
exported via the entrypoint (as this is a requirement for downstream
consumers to use them with Ivy).
To accomplish this, a graph of references is created and populated via the
ReferencesRegistry. Symbols exported via the package entrypoint are compared
against the graph to determine if any publicly visible symbols are not
properly exported. Diagnostics are produced for each one which also show the
path by which they become visible.
This commit also introduces a diagnostic (instead of a hard compiler crash)
if an entrypoint file cannot be correctly determined.
PR Close#27743
@angular/forms declares several directives and a module which are not
exported from the package via the entrypoint, either intentionally or as a
historical accident.
Ivy's locality principle necessitates that directives used in user code be
importable from the package which defines them. This requires these forms
directives to be exported.
Several directives which define ControlValueAccessors are exported:
* NumberValueAccessor
* RangeValueAccessor
A few more directives and a module are exported privately (with a ɵ prefix):
* NgNoValidate
* NgSelectMultipleOption
* InternalFormsSharedModule
PR Close#27743
Upcoming work to implement import resolution will change the dependencies
of some higher-level classes in ngtsc & ngcc. This necessitates changes in
how these classes are created and the lifecycle of the ts.Program in ngtsc
& ngcc.
To avoid complicating the implementation work with refactoring as a result
of the new dependencies, the refactoring is performed in this commit as a
separate prepatory step.
In ngtsc, the testing harness is modified to allow easier access to some
aspects of the ts.Program.
In ngcc, the main change is that the DecorationAnalyzer is created with the
ts.Program as a constructor parameter. This is not a lifecycle change, as
it was previously created with the ts.TypeChecker which is derived from the
ts.Program anyways. This change requires some reorganization in ngcc to
accommodate, especially in testing harnesses where DecorationAnalyzer is
created manually in a number of specs.
PR Close#27743
This refactoring moves code around between a few of the ngtsc subpackages,
with the goal of having a more logical package structure. Additional
interfaces are also introduced where they make sense.
The 'metadata' package formerly contained both the partial evaluator,
the TypeScriptReflectionHost as well as some other reflection functions,
and the Reference interface and various implementations. This package
was split into 3 parts.
The partial evaluator now has its own package 'partial_evaluator', and
exists behind an interface PartialEvaluator instead of a top-level
function. In the future this will be useful for reducing churn as the
partial evaluator becomes more complicated.
The TypeScriptReflectionHost and other miscellaneous functions have moved
into a new 'reflection' package. The former 'host' package which contained
the ReflectionHost interface and associated types was also merged into this
new 'reflection' package.
Finally, the Reference APIs were moved to the 'imports' package, which will
consolidate all import-related logic in ngtsc.
PR Close#27743
This commit moves the FlatIndexGenerator to its own package, in preparation
to expand its capabilities and support re-exporting of private declarations
from NgModules.
PR Close#27743
Previously the appendChild / removeChild could take null as an argument for
a child to be added / removed. This is difficult to understand since the
mentioned methods are noop if a child is null.
This commit clarifies the appendChild / removeChild signature to systematically
require a child node to be added removed. It turns out that null could be passed
only for a very specific i18n cases so now we guard a call to removeChild with
an explicit check on the i18n side.
PR Close#27987
This update introduces support for global object (window, document, body) listeners, that can be defined via host listeners on Components and Directives.
PR Close#27772
`i18nAttributes` was throwing an error when it was called multiple times in the create part of the template function with the same index, for example when we create multiple components with the same template. It shouldn't throw in this case, and just use the cache when available.
FW-903 #resolve
PR Close#27911
test.sh is no longer needed... all the tests should now be executed via bazel.
if for whatever reason we need to run the legacy unit test setup, we should should follow the commands that we use to execute those tests in .circle/config.yaml
PR Close#27937
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
Fixes Ivy's `QueryList` not being an instance of the exported ViewEnginer `QueryList`.
Also reworks `first`, `last` and `length` to be regular properties, rather than setters. Reworking `length` was required to be able to extend the ViewEngine `QueryList`, but I reworked `first` and `last` as well since getters generate a lot more code when transpiled to ES5.
These changes fix FW-706.
PR Close#27942
* Currently the protractor utils assume that the specified Bazel server runfile can be resolved by just using the real file system. This is not the case on Windows because the runfiles are not symlinked into the working directory and need to be resolved through the runfile manifest.
PR Close#27915
Currently when building a package on Windows, the typings re-export for secondary entry-points is not valid TypeScript. Similarly the metadata and the "package.json" files use non-posix paths and cause inconsistency within the NPM package.
For example:
_package.json_
```
"esm5": "./esm5\\core.js",
"esm2015": "./esm2015\\core.js",
```
_testing.d.t.s_ (of the `core` package)
```
export * from './testing\testing';
```
PR Close#27829
`R3TestBed` allows consumers to configure a "testing module", declare components, override various metadata, etc. To do this, it implements its own JIT compilation, where components/directives/modules have Ivy definition fields generated based on testing metadata. It results in tests interfering with each other. One test might override something in a component that another test tries to use normally, causing failures.
In order to resolve this problem, we store current components/directives/modules defs before applying overrides and re-compiling. Once the test is complete, we restore initial defs, so the next tests interact with "clean" components.
PR Close#27786
We missed removing the `fixme-ivy-aot` bazel tag from the BUILD file
of platform-browser-dynamic, so we weren't running the
`//packages/platform-browser-dynamic/test:test_web_chromium-local`
test target on CI. This commit turns on the tests and adds root causes
where they are known.
PR Close#27940
Previously, there could be identical template/listener function names
for a component's template, if it had multiple similarly structured
nested sub-templates or listeners.
This resulted in build errors:
`Identifier '<SOME_IDENTIFIER>' has already been declared`
This commit fixes this by ensuring that the template index is included
in the `contextName` passed to the `TemplateDefinitionBuilder`
responsible for processing nested sub-templates.
Similarly, the template or element index is included in the listener
names.
PR Close#27766
This PR assures that content projection works if an <ng-content> tag is
placed inside an <ng-template> in one component and that <ng-template>
is inserted into a different component. It fixes a bug where the
projection instruction code would walk up the insertion tree to find
selector data instead of the declaration tree.
PR Close#27783
Prior to this change, ICU extraction logic was not taking into account nested bindings (that look like this: �0:1�) and only accounted for top level bindings (like this �0�). As a result, ICUs were not parsed and remained as text in the output. Now the extraction logic (regular expressions) take into account the nested bindings format as well.
PR Close#27914
Internally getError and hasError call the AbstractControl#get method which takes `path: Array<string | number> | string` as input, since there are different ways to traverse the AbstractControl tree.
This change matches the method signitures of all methods that use this.
PR Close#20211
Some of the animation tests have been failing because animation gets
triggered multiple times. The reason for this is that the compiler was
generating static attribute bindings in addition to dynamic bindings.
This created multiple writes to the animation render which failed the
tests.
PR Close#27805
Due to an incorrect environment variable name, it's currently not possible to launch Protractor on Windows using the Bazel protractor rule.
PR Close#27850
Forward refs in some places (like imports/export/providers/viewProviders/queries) were not resolved before passing to compilation phase. Now we resolve missing refs before invoking compile function.
PR Close#27737
Prior to this change, provider overrides defined via TestBed.overrideProvider were not applied to Components/Directives. Now providers are taken into account while compiling Components/Directives (metadata is updated accordingly before being passed to compilation).
PR Close#27693
In some cases in our tests we can define multiple overrides for a given class. As a result, only the last override is actually applied due to the fact that we store overrides in a Type<->Override map. This update changes the logic to keep all overrides defined in a given test for a Type (i.e. Type<->Override[] map) and applies them one by one at resolution phase. This behavior is more inline with the previous TestBed.
PR Close#27734
This commit adds tests that verify the current behavior wrt injector
tree traversal for downgraded components, so that it is easier to
contrast with changed behavior is future commits (should we decide
to actually change it).
PR Close#27217
Previously, nested downgraded components would not be created/destroyed
inside the Angular zone (as they should) and they would not be wired up
correctly for change detection.
This commit ensures that ngUpgrade correctly detects whether this is an
ngUpgradeLite app (i.e. one using `downgradeModule()` instead of
`UpgradeModule`) and appropriately handles components, even if they are
nested inside other downgraded components.
Fixes#22581Closes#22869Closes#27083
PR Close#27217
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
Previously ivy code generation was emmiting the projectionDef instruction in
a template where the <ng-content> tag was found. This code generation logic was
incorrect since the ivy runtime expects the projectionDef instruction to be present
in the main template only.
This PR ammends the code generation logic so that the projectionDef instruction is
emmitedin the main template only.
PR Close#27755
Normally functions that return `ModuleWithProvider` objects should parameterize
the return type to include the type of `NgModule` that is being returned. For
example `forRoot(): ModuleWithProviders<RouterModule>`.
But in some cases, especially those generated by nccc, these functions to not
explicitly declare `ModuleWithProviders` as their return type. Instead they
return a "intersection" type, one of whose members is a type literal that
declares the `NgModule` type returned. For example:
`forRoot(): CustomType&{ngModule:RouterModule}`.
This commit changes the `NgModuleDecoratorHandler` so that it can extract
the `NgModule` type from either kind of declaration.
PR Close#27326
Exported functions or static method that return a `ModuleWithProviders`
compatible structure need to provide information about the referenced
`NgModule` type in their return type.
This allows ngtsc to be able to understand the type of `NgModule` that is
being returned from calls to the function, without having to dig into the
internals of the compiled library.
There are two ways to provide this information:
* Add a type parameter to the `ModuleWithProviders` return type. E.g.
```
static forRoot(): ModuleWithProviders<SomeNgModule>;
```
* Convert the return type to a union that includes a literal type. E.g.
```
static forRoot(): (SomeOtherType)&{ngModule:SomeNgModule};
```
This commit updates the rendering of typings files to include this type
information on all matching functions/methods.
PR Close#27326
To support updating `ModuleWithProviders` calls,
we need to be able to map exported functions between
source and typings files, as well as classes.
PR Close#27326
Prior to this commit, we had two different modes for change detection
execution for Ivy, depending on whether you called `bootstrap()` or
`renderComponent()`. In the former case, we would complete creation
mode for all components in the tree before beginning update mode for
any component. In the latter case, we would run creation mode and
update mode together for each component individually.
Maintaining code to support these two different execution orders was
unnecessarily complex, so this commit aligns the two bootstrapping
mechanisms to execute in the same order. Now creation mode always
runs for all components before update mode begins.
This change also simplifies our rendering logic so that we use
`LView` flags as the source of truth for rendering mode instead of
`rf` function arguments. This fixed some related bugs (e.g. calling
`ViewRef.detectChanges` synchronously after the view's creation
would create view nodes twice, view queries would execute twice, etc).
PR Close#27744
This option means guards and resolvers will ignore changes when a provided predicate function returns `false`. This supports use cases where an application needs to ignore some param updates but not others. For example, changing a sort param in the URL might need to be ignored, whereas changing the a `project` param might require re-run of guards and resolvers.
Related to #26861#18253#27464
PR Close#27682
Typescript 3.2 introduced BigInt type, and consequently the
implementation for checkExpressionWorker() in checkers.ts is refactored.
For NumberLiteral and StringLiteral types, 'text' filed must be present
in the Node type, therefore they must be LiteralLikeNode instead of
Node.
PR Close#27536
* We should try loading Angular.JS for the upgrade tests in their minfied output. There seems to be a lot flakiness in regards to loading `AngularJS` within Travis, and the `onerror` messages aren't really too helpful. In order to reduce the payload that will be passed through the Saucelabs tunnel, we should try to load the minfied output files.
PR Close#27711
This commit fixes a bug whereby the path of the entry_module is not
consistent with the workspace name, which does not permit dashes
in the name.
PR Close#27719
It looks like `fixmeIvy` imports were accidentally removed from Router integration tests, thus causing build errors. The necessary imports are now restored and the project should build normally.
PR Close#27720
We invoked `hostBindings` function in Create and Update modes with different element index due to the fact that we did not subtract HEADER_OFFSET from the index before passing it to `hostBindings` function in Create mode. Now we subtract HEADER_OFFSET value before invoking `hostBindings`, which makes Ceate and Update calls consistent.
PR Close#27694
Context discovery was only available on elements. This PR adds support for containers and ICU expressions.
FW-378 #resolve
FW-665 #comment linker integration tests
PR Close#27644
Currently whenever the upgrade test helper fails to load a given AngularJS version, the error that will be rejected is technically not an error because the `onerror` callback is not returning an error, but an "ErrorEvent".
Since that `ErrorEvent` is basically just rejected, browsers will print
the error as followed:
```
Failed: [object Event]
```
This is not helpful at all and also implies that there _might_ be more
information hidden within the `Event` instance. Unfortunately that's not
the case (at least on browsers we test against) and the logic to extract
the data from the event would be not worth the effort, we just return a
simple custom `Error` that won't imply that there is more information
hidden.
PR Close#27706
Relative imports in Typescript files only work when module_name is
defined in ts_library (when run in Node.js).
See issue https://github.com/bazelbuild/rules_typescript/issues/360
With that fixed, `ng test` now works.
`ng build` requires `node_modules` to be available in the project
directory, so it's not usable yet. Running `yarn` in project directory
does not work because of postinstall version check.
PR Close#27715
In ngUpgrade (dynamic) we create a dynamic Angular `Directive` that wraps AngularJS components
that are being upgraded. The constructor of this `Directive` class returns a different instance
than `this`. It is this instance that actually contains the life-cycle hook handlers.
This would break in ivy, since the methods on the prototype of the original class are wired up,
rather than the instance methods. This results in hooks like `ngOnInit` not being called.
This commit refactors the code to extend the inner class that was being returned so that the
prototype chain is correct for both ViewEngine and ivy.
This change resolves a number of failing ivy tests, but also exposes other failures that were
masked by this issue. The tests have been updated accordingly.
(FW-812)
PR Close#27660
`NgModule` requires that `Component`s/`Directive`s/`Pipe`s are listed in
declarations, and that each `Component`s/`Directive`s/`Pipe` is declared
in exactly one `NgModule`. This change adds runtime checks to ensure
that these sementics are true at runtime.
There will need to be seperate set of checks for the AoT path of the
codebase to verify that same set of semantics hold. Due to current
design there does not seem to be an easy way to share the two checks
because JIT deal with references where as AoT deals with AST nodes.
PR Close#27604
With the bundle info being assembled into a single object before the
transform is started, we now greedily create a TypeScript program up-front.
If a marker file exists that indicates that the bundle could be skipped
the program creation has already taken place which takes a significant
amount of time. This commit moves the marker check to occur before the
bundle is assembled.
PR Close#27438
ngcc would feed ngtsc with the function declaration inside of an IIFE as
that is considered the class symbol's declaration node, according to
TypeScript's `ts.Symbol.valueDeclaration`. ngtsc however only considered
variable decls and actual class decls as potential class declarations,
so given the function declaration node it would fail to generate the
`setClassMetadata` call.
ngtsc no longer makes its own assumptions about what classes look like,
but always asks the reflection host to yield this kind of information.
PR Close#27438
While creating FESM files, rollup usually drops all unused symbols.
All *__POST_R3__ are unused unless ngcc rewires stuff. To prevent this DCE
we reexport them as private symbols. If ngcc is not used, these symbols will
be dropped when we optimize an application bundle.
PR Close#27438
Prior to this change, we were unable to match directives using `ng-template` tags (for example the following selector would not work even though there might be some <ng-template>s in a template: `ng-template[directiveA]`. As a result, that broke some components that relies on such selectors to work. In order to resolve the problem, we now pass tag name to the `template` instruction (where we passed `null` before) and this tag name is used for matching at runtime. This update should also help support projecting containers, because the tag name is required to properly match such elements.
PR Close#27636
Andrew Kushnir
Paul Gschwendtner
Pawel Kozlowski
Kara Erickson
Marc Laval
George Kalpakas
Olivier Combe
Vladimir Moskva
Vani
Filipe Silva
stoneLeaf
Kristiyan Kostadinov
cexbrayat
Alex Eagle
Miško Hevery
Matias Niemelä
Omar Griffin
Jeremy Elbourn
kevinphelps
Greg Magolan
Keen Yee Liau
Erick Xavier
onlyflix
jithil-kore
Benedikt Meurer
Jason Aden
Alex Rickabaugh
JoostK
Keen Yee Liau
Martin Sikora
Felix Lemke
Daniel Ruf
William Neely
Ben Lesh
Sarun Intaralawan
Judy Bogart
Sander Elias
Daniel Ruf
Pete Bacon Darwin
alsami
Igor Minar
Alan
Ernest Galbrun
Serginho
赵正阳
kwiateusz
Kara
Adam Plumer
Karanveer Plaha
Teamop
Suguru Inatomi
Meknassih
Ivan Tham
Dario Braun
Fabian Wiles
Michael De Wree
jnizet
Brandon Roberts
cyraid