druid-docs-cn/development/extensions-core/approximate-histograms.md

14 KiB

id title
approximate-histograms Approximate Histogram aggregators

To use this Apache Druid extension, make sure to include druid-histogram as an extension.

The druid-histogram extension provides an approximate histogram aggregator and a fixed buckets histogram aggregator.

Approximate Histogram aggregator (Deprecated)

The Approximate Histogram aggregator is deprecated. Please use DataSketches Quantiles instead which provides a superior distribution-independent algorithm with formal error guarantees.

This aggregator is based on http://jmlr.org/papers/volume11/ben-haim10a/ben-haim10a.pdf to compute approximate histograms, with the following modifications:

  • some tradeoffs in accuracy were made in the interest of speed (see below)
  • the sketch maintains the exact original data as long as the number of distinct data points is fewer than the resolutions (number of centroids), increasing accuracy when there are few data points, or when dealing with discrete data points. You can find some of the details in this post.

Approximate histogram sketches are still experimental for a reason, and you should understand the limitations of the current implementation before using them. The approximation is heavily data-dependent, which makes it difficult to give good general guidelines, so you should experiment and see what parameters work well for your data.

Here are a few things to note before using them:

  • As indicated in the original paper, there are no formal error bounds on the approximation. In practice, the approximation gets worse if the distribution is skewed.
  • The algorithm is order-dependent, so results can vary for the same query, due to variations in the order in which results are merged.
  • In general, the algorithm only works well if the data that comes is randomly distributed (i.e. if data points end up sorted in a column, approximation will be horrible)
  • We traded accuracy for aggregation speed, taking some shortcuts when adding histograms together, which can lead to pathological cases if your data is ordered in some way, or if your distribution has long tails. It should be cheaper to increase the resolution of the sketch to get the accuracy you need.

That being said, those sketches can be useful to get a first order approximation when averages are not good enough. Assuming most rows in your segment store fewer data points than the resolution of histogram, you should be able to use them for monitoring purposes and detect meaningful variations with a few hundred centroids. To get good accuracy readings on 95th percentiles with millions of rows of data, you may want to use several thousand centroids, especially with long tails, since that's where the approximation will be worse.

Creating approximate histogram sketches at ingestion time

To use this feature, an "approxHistogram" or "approxHistogramFold" aggregator must be included at indexing time. The ingestion aggregator can only apply to numeric values. If you use "approxHistogram" then any input rows missing the value will be considered to have a value of 0, while with "approxHistogramFold" such rows will be ignored.

To query for results, an "approxHistogramFold" aggregator must be included in the query.

{
  "type" : "approxHistogram or approxHistogramFold (at ingestion time), approxHistogramFold (at query time)",
  "name" : <output_name>,
  "fieldName" : <metric_name>,
  "resolution" : <integer>,
  "numBuckets" : <integer>,
  "lowerLimit" : <float>,
  "upperLimit" : <float>
}
Property Description Default
resolution Number of centroids (data points) to store. The higher the resolution, the more accurate results are, but the slower the computation will be. 50
numBuckets Number of output buckets for the resulting histogram. Bucket intervals are dynamic, based on the range of the underlying data. Use a post-aggregator to have finer control over the bucketing scheme 7
lowerLimit/upperLimit Restrict the approximation to the given range. The values outside this range will be aggregated into two centroids. Counts of values outside this range are still maintained. -INF/+INF
finalizeAsBase64Binary If true, the finalized aggregator value will be a Base64-encoded byte array containing the serialized form of the histogram. If false, the finalized aggregator value will be a JSON representation of the histogram. false

Fixed Buckets Histogram

The fixed buckets histogram aggregator builds a histogram on a numeric column, with evenly-sized buckets across a specified value range. Values outside of the range are handled based on a user-specified outlier handling mode.

This histogram supports the min/max/quantiles post-aggregators but does not support the bucketing post-aggregators.

When to use

The accuracy/usefulness of the fixed buckets histogram is extremely data-dependent; it is provided to support special use cases where the user has a great deal of prior information about the data being aggregated and knows that a fixed buckets implementation is suitable.

For general histogram and quantile use cases, the DataSketches Quantiles Sketch extension is recommended.

Properties

Property Description Default
type Type of the aggregator. Must fixedBucketsHistogram. No default, must be specified
name Column name for the aggregator. No default, must be specified
fieldName Column name of the input to the aggregator. No default, must be specified
lowerLimit Lower limit of the histogram. No default, must be specified
upperLimit Upper limit of the histogram. No default, must be specified
numBuckets Number of buckets for the histogram. The range [lowerLimit, upperLimit] will be divided into numBuckets intervals of equal size. 10
outlierHandlingMode Specifies how values outside of [lowerLimit, upperLimit] will be handled. Supported modes are "ignore", "overflow", and "clip". See outlier handling modes for more details. No default, must be specified
finalizeAsBase64Binary If true, the finalized aggregator value will be a Base64-encoded byte array containing the serialized form of the histogram. If false, the finalized aggregator value will be a JSON representation of the histogram. false

An example aggregator spec is shown below:

{
  "type" : "fixedBucketsHistogram",
  "name" : <output_name>,
  "fieldName" : <metric_name>,
  "numBuckets" : <integer>,
  "lowerLimit" : <double>,
  "upperLimit" : <double>,
  "outlierHandlingMode": <mode>
}

Outlier handling modes

The outlier handling mode specifies what should be done with values outside of the histogram's range. There are three supported modes:

  • ignore: Throw away outlier values.
  • overflow: A count of outlier values will be tracked by the histogram, available in the lowerOutlierCount and upperOutlierCount fields.
  • clip: Outlier values will be clipped to the lowerLimit or the upperLimit and included in the histogram.

If you don't care about outliers, ignore is the cheapest option performance-wise. There is currently no difference in storage size among the modes.

Output fields

The histogram aggregator's output object has the following fields:

  • lowerLimit: Lower limit of the histogram
  • upperLimit: Upper limit of the histogram
  • numBuckets: Number of histogram buckets
  • outlierHandlingMode: Outlier handling mode
  • count: Total number of values contained in the histogram, excluding outliers
  • lowerOutlierCount: Count of outlier values below lowerLimit. Only used if the outlier mode is overflow.
  • upperOutlierCount: Count of outlier values above upperLimit. Only used if the outlier mode is overflow.
  • missingValueCount: Count of null values seen by the histogram.
  • max: Max value seen by the histogram. This does not include outlier values.
  • min: Min value seen by the histogram. This does not include outlier values.
  • histogram: An array of longs with size numBuckets, containing the bucket counts

Ingesting existing histograms

It is also possible to ingest existing fixed buckets histograms. The input must be a Base64 string encoding a byte array that contains a serialized histogram object. Both "full" and "sparse" formats can be used. Please see Serialization formats below for details.

Serialization formats

Full serialization format

This format includes the full histogram bucket count array in the serialization format.

byte: serialization version, must be 0x01
byte: encoding mode, 0x01 for full
double: lowerLimit
double: upperLimit
int: numBuckets
byte: outlier handling mode (0x00 for `ignore`, 0x01 for `overflow`, and 0x02 for `clip`)
long: count, total number of values contained in the histogram, excluding outliers
long: lowerOutlierCount
long: upperOutlierCount
long: missingValueCount
double: max
double: min
array of longs: bucket counts for the histogram

Sparse serialization format

This format represents the histogram bucket counts as (bucketNum, count) pairs. This serialization format is used when less than half of the histogram's buckets have values.

byte: serialization version, must be 0x01
byte: encoding mode, 0x02 for sparse
double: lowerLimit
double: upperLimit
int: numBuckets
byte: outlier handling mode (0x00 for `ignore`, 0x01 for `overflow`, and 0x02 for `clip`)
long: count, total number of values contained in the histogram, excluding outliers
long: lowerOutlierCount
long: upperOutlierCount
long: missingValueCount
double: max
double: min
int: number of following (bucketNum, count) pairs
sequence of (int, long) pairs:
  int: bucket number
  count: bucket count

Combining histograms with different bucketing schemes

It is possible to combine two histograms with different bucketing schemes (lowerLimit, upperLimit, numBuckets) together.

The bucketing scheme of the "left hand" histogram will be preserved (i.e., when running a query, the bucketing schemes specified in the query's histogram aggregators will be preserved).

When merging, we assume that values are evenly distributed within the buckets of the "right hand" histogram.

When the right-hand histogram contains outliers (when using overflow mode), we assume that all of the outliers counted in the right-hand histogram will be outliers in the left-hand histogram as well.

For performance and accuracy reasons, we recommend avoiding aggregation of histograms with different bucketing schemes if possible.

Null handling

If druid.generic.useDefaultValueForNull is false, null values will be tracked in the missingValueCount field of the histogram.

If druid.generic.useDefaultValueForNull is true, null values will be added to the histogram as the default 0.0 value.

Histogram post-aggregators

Post-aggregators are used to transform opaque approximate histogram sketches into bucketed histogram representations, as well as to compute various distribution metrics such as quantiles, min, and max.

Equal buckets post-aggregator

Computes a visual representation of the approximate histogram with a given number of equal-sized bins. Bucket intervals are based on the range of the underlying data. This aggregator is not supported for the fixed buckets histogram.

{
  "type": "equalBuckets",
  "name": "<output_name>",
  "fieldName": "<aggregator_name>",
  "numBuckets": <count>
}

Buckets post-aggregator

Computes a visual representation given an initial breakpoint, offset, and a bucket size.

Bucket size determines the width of the binning interval.

Offset determines the value on which those interval bins align.

This aggregator is not supported for the fixed buckets histogram.

{
  "type": "buckets",
  "name": "<output_name>",
  "fieldName": "<aggregator_name>",
  "bucketSize": <bucket_size>,
  "offset": <offset>
}

Custom buckets post-aggregator

Computes a visual representation of the approximate histogram with bins laid out according to the given breaks.

This aggregator is not supported for the fixed buckets histogram.

{ "type" : "customBuckets", "name" : <output_name>, "fieldName" : <aggregator_name>,
  "breaks" : [ <value>, <value>, ... ] }

min post-aggregator

Returns the minimum value of the underlying approximate or fixed buckets histogram aggregator

{ "type" : "min", "name" : <output_name>, "fieldName" : <aggregator_name> }

max post-aggregator

Returns the maximum value of the underlying approximate or fixed buckets histogram aggregator

{ "type" : "max", "name" : <output_name>, "fieldName" : <aggregator_name> }

quantile post-aggregator

Computes a single quantile based on the underlying approximate or fixed buckets histogram aggregator

{ "type" : "quantile", "name" : <output_name>, "fieldName" : <aggregator_name>,
  "probability" : <quantile> }

quantiles post-aggregator

Computes an array of quantiles based on the underlying approximate or fixed buckets histogram aggregator

{ "type" : "quantiles", "name" : <output_name>, "fieldName" : <aggregator_name>,
  "probabilities" : [ <quantile>, <quantile>, ... ] }