druid-docs-cn/ingestion/native-batch.md

147 KiB
Raw Blame History

id title sidebar_label
native-batch Native batch ingestion Native batch

Apache Druid currently has two types of native batch indexing tasks, index_parallel which can run multiple tasks in parallel, and index which will run a single indexing task. Please refer to our Hadoop-based vs. native batch comparison table for comparisons between Hadoop-based, native batch (simple), and native batch (parallel) ingestion.

To run either kind of native batch indexing task, write an ingestion spec as specified below. Then POST it to the /druid/indexer/v1/task endpoint on the Overlord, or use the bin/post-index-task script included with Druid.

Tutorial

This page contains reference documentation for native batch ingestion. For a walk-through instead, check out the Loading a file tutorial, which demonstrates the "simple" (single-task) mode.

Parallel task

The Parallel task (type index_parallel) is a task for parallel batch indexing. This task only uses Druid's resource and doesn't depend on other external systems like Hadoop. The index_parallel task is a supervisor task that orchestrates the whole indexing process. The supervisor task splits the input data and creates worker tasks to process those splits. The created worker tasks are issued to the Overlord so that they can be scheduled and run on MiddleManagers or Indexers. Once a worker task successfully processes the assigned input split, it reports the generated segment list to the supervisor task. The supervisor task periodically checks the status of worker tasks. If one of them fails, it retries the failed task until the number of retries reaches the configured limit. If all worker tasks succeed, it publishes the reported segments at once and finalizes ingestion.

The detailed behavior of the Parallel task is different depending on the partitionsSpec. See each partitionsSpec for more details.

To use this task, the inputSource in the ioConfig should be splittable and maxNumConcurrentSubTasks should be set to larger than 1 in the tuningConfig. Otherwise, this task runs sequentially; the index_parallel task reads each input file one by one and creates segments by itself. The supported splittable input formats for now are:

  • s3 reads data from AWS S3 storage.
  • gs reads data from Google Cloud Storage.
  • azure reads data from Azure Blob Storage.
  • hdfs reads data from HDFS storage.
  • http reads data from HTTP servers.
  • local reads data from local storage.
  • druid reads data from a Druid datasource.
  • sql reads data from a RDBMS source.

Some other cloud storage types are supported with the legacy firehose. The below firehose types are also splittable. Note that only text formats are supported with the firehose.

Compression formats supported

The supported compression formats for native batch ingestion are bz2, gz, xz, zip, sz (Snappy), and zst (ZSTD).

Implementation considerations

  • You may want to control the amount of input data each worker task processes. This can be controlled using different configurations depending on the phase in parallel ingestion (see partitionsSpec for more details). For the tasks that read data from the inputSource, you can set the Split hint spec in the tuningConfig. For the tasks that merge shuffled segments, you can set the totalNumMergeTasks in the tuningConfig.

  • The number of concurrent worker tasks in parallel ingestion is determined by maxNumConcurrentSubTasks in the tuningConfig. The supervisor task checks the number of current running worker tasks and creates more if it's smaller than maxNumConcurrentSubTasks no matter how many task slots are currently available. This may affect to other ingestion performance. See the below Capacity Planning section for more details.

  • By default, batch ingestion replaces all data (in your granularitySpec's intervals) in any segment that it writes to. If you'd like to add to the segment instead, set the appendToExisting flag in the ioConfig. Note that it only replaces data in segments where it actively adds data: if there are segments in your granularitySpec's intervals that have no data written by this task, they will be left alone. If any existing segments partially overlap with the granularitySpec's intervals, the portion of those segments outside the new segments' intervals will still be visible.

  • You can set dropExisting flag in the ioConfig to true if you want the ingestion task to drop all existing segments that start and end within your granularitySpec's intervals. This applies whether or not the new data covers all existing segments. dropExisting only applies when appendToExisting is false and the granularitySpec contains an interval. WARNING: this functionality is still in beta and can result in temporary data unavailability for data within the specified interval

    The following examples demonstrate when to set the dropExisting property to true in the ioConfig:

    • Example 1: Consider an existing segment with an interval of 2020-01-01 to 2021-01-01 and YEAR segmentGranularity. You want to overwrite the whole interval of 2020-01-01 to 2021-01-01 with new data using the finer segmentGranularity of MONTH. If the replacement data does not have a record within every months from 2020-01-01 to 2021-01-01 Druid cannot drop the original YEAR segment even if it does include all the replacement. Set dropExisting to true in this case to drop the original segment at year segmentGranularity since you no longer need it.
    • Example 2: Consider the case where you want to re-ingest or overwrite a datasource and the new data does not contains some time intervals that exist in the datasource. For example, a datasource contains the following data at MONTH segmentGranularity:
      January: 1 record
      February: 10 records
      March: 10 records
      You want to re-ingest and overwrite with new data as follows:
      January: 0 records
      February: 10 records
      March: 9 records
      Unless you set dropExisting to true, the result after ingestion with overwrite using the same MONTH segmentGranularity would be:
      January: 1 record
      February: 10 records
      March: 9 records
      This is incorrect since the new data has 0 records for January. Setting dropExisting to true to drop the original segment for January that is not needed since the newly ingested data has no records for January.

Task syntax

A sample task is shown below:

{
  "type": "index_parallel",
  "spec": {
    "dataSchema": {
      "dataSource": "wikipedia_parallel_index_test",
      "timestampSpec": {
        "column": "timestamp"
      },
      "dimensionsSpec": {
        "dimensions": [
          "page",
          "language",
          "user",
          "unpatrolled",
          "newPage",
          "robot",
          "anonymous",
          "namespace",
          "continent",
          "country",
          "region",
          "city"
        ]
      },
      "metricsSpec": [
        {
          "type": "count",
              "name": "count"
            },
            {
              "type": "doubleSum",
              "name": "added",
              "fieldName": "added"
            },
            {
              "type": "doubleSum",
              "name": "deleted",
              "fieldName": "deleted"
            },
            {
              "type": "doubleSum",
              "name": "delta",
              "fieldName": "delta"
            }
        ],
        "granularitySpec": {
          "segmentGranularity": "DAY",
          "queryGranularity": "second",
          "intervals" : [ "2013-08-31/2013-09-02" ]
        }
    },
    "ioConfig": {
        "type": "index_parallel",
        "inputSource": {
          "type": "local",
          "baseDir": "examples/indexing/",
          "filter": "wikipedia_index_data*"
        },
        "inputFormat": {
          "type": "json"
        }
    },
    "tuningConfig": {
        "type": "index_parallel",
        "maxNumConcurrentSubTasks": 2
    }
  }
}
property description required?
type The task type, this should always be index_parallel. yes
id The task ID. If this is not explicitly specified, Druid generates the task ID using task type, data source name, interval, and date-time stamp. no
spec The ingestion spec including the data schema, IOConfig, and TuningConfig. See below for more details. yes
context Context containing various task configuration parameters. See below for more details. no
awaitSegmentAvailabilityTimeoutMillis Long Milliseconds to wait for the newly indexed segments to become available for query after ingestion completes. If <= 0, no wait will occur. If > 0, the task will wait for the Coordinator to indicate that the new segments are available for querying. If the timeout expires, the task will exit as successful, but the segments were not confirmed to have become available for query. Note for compaction tasks: you should not set this to a non-zero value because it is not supported by the compaction task type at this time.

dataSchema

This field is required.

See Ingestion Spec DataSchema

If you specify intervals explicitly in your dataSchema's granularitySpec, batch ingestion will lock the full intervals specified when it starts up, and you will learn quickly if the specified interval overlaps with locks held by other tasks (e.g., Kafka ingestion). Otherwise, batch ingestion will lock each interval as it is discovered, so you may only learn that the task overlaps with a higher-priority task later in ingestion. If you specify intervals explicitly, any rows outside the specified intervals will be thrown away. We recommend setting intervals explicitly if you know the time range of the data so that locking failure happens faster, and so that you don't accidentally replace data outside that range if there's some stray data with unexpected timestamps.

ioConfig

property description default required?
type The task type, this should always be index_parallel. none yes
inputFormat inputFormat to specify how to parse input data. none yes
appendToExisting Creates segments as additional shards of the latest version, effectively appending to the segment set instead of replacing it. This means that you can append new segments to any datasource regardless of its original partitioning scheme. You must use the dynamic partitioning type for the appended segments. If you specify a different partitioning type, the task fails with an error. false no
dropExisting If true and appendToExisting is false and the granularitySpec contains aninterval, then the ingestion task drops (mark unused) all existing segments fully contained by the specified interval when the task publishes new segments. If ingestion fails, Druid does not drop or mark unused any segments. In the case of misconfiguration where either appendToExisting is true or interval is not specified in granularitySpec, Druid does not drop any segments even if dropExisting is true. WARNING: this functionality is still in beta and can result in temporary data unavailability for data within the specified interval. false no

tuningConfig

The tuningConfig is optional and default parameters will be used if no tuningConfig is specified. See below for more details.

property description default required?
type The task type, this should always be index_parallel. none yes
maxRowsPerSegment Deprecated. Use partitionsSpec instead. Used in sharding. Determines how many rows are in each segment. 5000000 no
maxRowsInMemory Used in determining when intermediate persists to disk should occur. Normally user does not need to set this, but depending on the nature of data, if rows are short in terms of bytes, user may not want to store a million rows in memory and this value should be set. 1000000 no
maxBytesInMemory Used in determining when intermediate persists to disk should occur. Normally this is computed internally and user does not need to set it. This value represents number of bytes to aggregate in heap memory before persisting. This is based on a rough estimate of memory usage and not actual usage. The maximum heap memory usage for indexing is maxBytesInMemory * (2 + maxPendingPersists). Note that maxBytesInMemory also includes heap usage of artifacts created from intermediary persists. This means that after every persist, the amount of maxBytesInMemory until next persist will decreases, and task will fail when the sum of bytes of all intermediary persisted artifacts exceeds maxBytesInMemory. 1/6 of max JVM memory no
maxColumnsToMerge A parameter that limits how many segments can be merged in a single phase when merging segments for publishing. This limit is imposed on the total number of columns present in a set of segments being merged. If the limit is exceeded, segment merging will occur in multiple phases. At least 2 segments will be merged in a single phase, regardless of this setting. -1 (unlimited) no
maxTotalRows Deprecated. Use partitionsSpec instead. Total number of rows in segments waiting for being pushed. Used in determining when intermediate pushing should occur. 20000000 no
numShards Deprecated. Use partitionsSpec instead. Directly specify the number of shards to create when using a hashed partitionsSpec. If this is specified and intervals is specified in the granularitySpec, the index task can skip the determine intervals/partitions pass through the data. numShards cannot be specified if maxRowsPerSegment is set. null no
splitHintSpec Used to give a hint to control the amount of data that each first phase task reads. This hint could be ignored depending on the implementation of the input source. See Split hint spec for more details. size-based split hint spec no
partitionsSpec Defines how to partition data in each timeChunk, see PartitionsSpec dynamic if forceGuaranteedRollup = false, hashed or single_dim if forceGuaranteedRollup = true no
indexSpec Defines segment storage format options to be used at indexing time, see IndexSpec null no
indexSpecForIntermediatePersists Defines segment storage format options to be used at indexing time for intermediate persisted temporary segments. this can be used to disable dimension/metric compression on intermediate segments to reduce memory required for final merging. however, disabling compression on intermediate segments might increase page cache use while they are used before getting merged into final segment published, see IndexSpec for possible values. same as indexSpec no
maxPendingPersists Maximum number of persists that can be pending but not started. If this limit would be exceeded by a new intermediate persist, ingestion will block until the currently-running persist finishes. Maximum heap memory usage for indexing scales with maxRowsInMemory * (2 + maxPendingPersists). 0 (meaning one persist can be running concurrently with ingestion, and none can be queued up) no
forceGuaranteedRollup Forces guaranteeing the perfect rollup. The perfect rollup optimizes the total size of generated segments and querying time while indexing time will be increased. If this is set to true, intervals in granularitySpec must be set and hashed or single_dim must be used for partitionsSpec. This flag cannot be used with appendToExisting of IOConfig. For more details, see the below Segment pushing modes section. false no
reportParseExceptions If true, exceptions encountered during parsing will be thrown and will halt ingestion; if false, unparseable rows and fields will be skipped. false no
pushTimeout Milliseconds to wait for pushing segments. It must be >= 0, where 0 means to wait forever. 0 no
segmentWriteOutMediumFactory Segment write-out medium to use when creating segments. See SegmentWriteOutMediumFactory. Not specified, the value from druid.peon.defaultSegmentWriteOutMediumFactory.type is used no
maxNumConcurrentSubTasks Maximum number of worker tasks which can be run in parallel at the same time. The supervisor task would spawn worker tasks up to maxNumConcurrentSubTasks regardless of the current available task slots. If this value is set to 1, the supervisor task processes data ingestion on its own instead of spawning worker tasks. If this value is set to too large, too many worker tasks can be created which might block other ingestion. Check Capacity Planning for more details. 1 no
maxRetry Maximum number of retries on task failures. 3 no
maxNumSegmentsToMerge Max limit for the number of segments that a single task can merge at the same time in the second phase. Used only forceGuaranteedRollup is set. 100 no
totalNumMergeTasks Total number of tasks to merge segments in the merge phase when partitionsSpec is set to hashed or single_dim. 10 no
taskStatusCheckPeriodMs Polling period in milliseconds to check running task statuses. 1000 no
chatHandlerTimeout Timeout for reporting the pushed segments in worker tasks. PT10S no
chatHandlerNumRetries Retries for reporting the pushed segments in worker tasks. 5 no
awaitSegmentAvailabilityTimeoutMillis Long Milliseconds to wait for the newly indexed segments to become available for query after ingestion completes. If <= 0, no wait will occur. If > 0, the task will wait for the Coordinator to indicate that the new segments are available for querying. If the timeout expires, the task will exit as successful, but the segments were not confirmed to have become available for query. no (default = 0)

Split Hint Spec

The split hint spec is used to give a hint when the supervisor task creates input splits. Note that each worker task processes a single input split. You can control the amount of data each worker task will read during the first phase.

Size-based Split Hint Spec

The size-based split hint spec is respected by all splittable input sources except for the HTTP input source and SQL input source.

property description default required?
type This should always be maxSize. none yes
maxSplitSize Maximum number of bytes of input files to process in a single subtask. If a single file is larger than this number, it will be processed by itself in a single subtask (Files are never split across tasks yet). Note that one subtask will not process more files than maxNumFiles even when their total size is smaller than maxSplitSize. Human-readable format is supported. 1GiB no
maxNumFiles Maximum number of input files to process in a single subtask. This limit is to avoid task failures when the ingestion spec is too long. There are two known limits on the max size of serialized ingestion spec, i.e., the max ZNode size in ZooKeeper (jute.maxbuffer) and the max packet size in MySQL (max_allowed_packet). These can make ingestion tasks fail if the serialized ingestion spec size hits one of them. Note that one subtask will not process more data than maxSplitSize even when the total number of files is smaller than maxNumFiles. 1000 no

Segments Split Hint Spec

The segments split hint spec is used only for DruidInputSource (and legacy IngestSegmentFirehose).

property description default required?
type This should always be segments. none yes
maxInputSegmentBytesPerTask Maximum number of bytes of input segments to process in a single subtask. If a single segment is larger than this number, it will be processed by itself in a single subtask (input segments are never split across tasks). Note that one subtask will not process more segments than maxNumSegments even when their total size is smaller than maxInputSegmentBytesPerTask. Human-readable format is supported. 1GiB no
maxNumSegments Maximum number of input segments to process in a single subtask. This limit is to avoid task failures when the ingestion spec is too long. There are two known limits on the max size of serialized ingestion spec, i.e., the max ZNode size in ZooKeeper (jute.maxbuffer) and the max packet size in MySQL (max_allowed_packet). These can make ingestion tasks fail if the serialized ingestion spec size hits one of them. Note that one subtask will not process more data than maxInputSegmentBytesPerTask even when the total number of segments is smaller than maxNumSegments. 1000 no

partitionsSpec

PartitionsSpec is used to describe the secondary partitioning method. You should use different partitionsSpec depending on the rollup mode you want. For perfect rollup, you should use either hashed (partitioning based on the hash of dimensions in each row) or single_dim (based on ranges of a single dimension). For best-effort rollup, you should use dynamic.

The three partitionsSpec types have different characteristics.

PartitionsSpec Ingestion speed Partitioning method Supported rollup mode Secondary partition pruning at query time
dynamic Fastest Partitioning based on number of rows in segment. Best-effort rollup N/A
hashed Moderate Partitioning based on the hash value of partition dimensions. This partitioning may reduce your datasource size and query latency by improving data locality. See Partitioning for more details. Perfect rollup The broker can use the partition information to prune segments early to speed up queries. Since the broker knows how to hash partitionDimensions values to locate a segment, given a query including a filter on all the partitionDimensions, the broker can pick up only the segments holding the rows satisfying the filter on partitionDimensions for query processing.

Note that partitionDimensions must be set at ingestion time to enable secondary partition pruning at query time.
single_dim Slowest Range partitioning based on the value of the partition dimension. Segment sizes may be skewed depending on the partition key distribution. This may reduce your datasource size and query latency by improving data locality. See Partitioning for more details. Perfect rollup The broker can use the partition information to prune segments early to speed up queries. Since the broker knows the range of partitionDimension values in each segment, given a query including a filter on the partitionDimension, the broker can pick up only the segments holding the rows satisfying the filter on partitionDimension for query processing.

The recommended use case for each partitionsSpec is:

  • If your data has a uniformly distributed column which is frequently used in your queries, consider using single_dim partitionsSpec to maximize the performance of most of your queries.
  • If your data doesn't have a uniformly distributed column, but is expected to have a high rollup ratio when you roll up with some dimensions, consider using hashed partitionsSpec. It could reduce the size of datasource and query latency by improving data locality.
  • If the above two scenarios are not the case or you don't need to roll up your datasource, consider using dynamic partitionsSpec.

Dynamic partitioning

property description default required?
type This should always be dynamic none yes
maxRowsPerSegment Used in sharding. Determines how many rows are in each segment. 5000000 no
maxTotalRows Total number of rows across all segments waiting for being pushed. Used in determining when intermediate segment push should occur. 20000000 no

With the Dynamic partitioning, the parallel index task runs in a single phase: it will spawn multiple worker tasks (type single_phase_sub_task), each of which creates segments. How the worker task creates segments is:

  • The task creates a new segment whenever the number of rows in the current segment exceeds maxRowsPerSegment.
  • Once the total number of rows in all segments across all time chunks reaches to maxTotalRows, the task pushes all segments created so far to the deep storage and creates new ones.

Hash-based partitioning

property description default required?
type This should always be hashed none yes
numShards Directly specify the number of shards to create. If this is specified and intervals is specified in the granularitySpec, the index task can skip the determine intervals/partitions pass through the data. This property and targetRowsPerSegment cannot both be set. none no
targetRowsPerSegment A target row count for each partition. If numShards is left unspecified, the Parallel task will determine a partition count automatically such that each partition has a row count close to the target, assuming evenly distributed keys in the input data. A target per-segment row count of 5 million is used if both numShards and targetRowsPerSegment are null. null (or 5,000,000 if both numShards and targetRowsPerSegment are null) no
partitionDimensions The dimensions to partition on. Leave blank to select all dimensions. null no
partitionFunction A function to compute hash of partition dimensions. See Hash partition function murmur3_32_abs no

The Parallel task with hash-based partitioning is similar to MapReduce. The task runs in up to 3 phases: partial dimension cardinality, partial segment generation and partial segment merge.

  • The partial dimension cardinality phase is an optional phase that only runs if numShards is not specified. The Parallel task splits the input data and assigns them to worker tasks based on the split hint spec. Each worker task (type partial_dimension_cardinality) gathers estimates of partitioning dimensions cardinality for each time chunk. The Parallel task will aggregate these estimates from the worker tasks and determine the highest cardinality across all of the time chunks in the input data, dividing this cardinality by targetRowsPerSegment to automatically determine numShards.
  • In the partial segment generation phase, just like the Map phase in MapReduce, the Parallel task splits the input data based on the split hint spec and assigns each split to a worker task. Each worker task (type partial_index_generate) reads the assigned split, and partitions rows by the time chunk from segmentGranularity (primary partition key) in the granularitySpec and then by the hash value of partitionDimensions (secondary partition key) in the partitionsSpec. The partitioned data is stored in local storage of the middleManager or the indexer.
  • The partial segment merge phase is similar to the Reduce phase in MapReduce. The Parallel task spawns a new set of worker tasks (type partial_index_generic_merge) to merge the partitioned data created in the previous phase. Here, the partitioned data is shuffled based on the time chunk and the hash value of partitionDimensions to be merged; each worker task reads the data falling in the same time chunk and the same hash value from multiple MiddleManager/Indexer processes and merges them to create the final segments. Finally, they push the final segments to the deep storage at once.
Hash partition function

In hash partitioning, the partition function is used to compute hash of partition dimensions. The partition dimension values are first serialized into a byte array as a whole, and then the partition function is applied to compute hash of the byte array. Druid currently supports only one partition function.

name description
murmur3_32_abs Applies an absolute value function to the result of murmur3_32.

Single-dimension range partitioning

Single dimension range partitioning is currently not supported in the sequential mode of the Parallel task. The Parallel task will use one subtask when you set maxNumConcurrentSubTasks to 1.

property description default required?
type This should always be single_dim none yes
partitionDimension The dimension to partition on. Only rows with a single dimension value are allowed. none yes
targetRowsPerSegment Target number of rows to include in a partition, should be a number that targets segments of 500MB~1GB. none either this or maxRowsPerSegment
maxRowsPerSegment Soft max for the number of rows to include in a partition. none either this or targetRowsPerSegment
assumeGrouped Assume that input data has already been grouped on time and dimensions. Ingestion will run faster, but may choose sub-optimal partitions if this assumption is violated. false no

With single-dim partitioning, the Parallel task runs in 3 phases, i.e., partial dimension distribution, partial segment generation, and partial segment merge. The first phase is to collect some statistics to find the best partitioning and the other 2 phases are to create partial segments and to merge them, respectively, as in hash-based partitioning.

  • In the partial dimension distribution phase, the Parallel task splits the input data and assigns them to worker tasks based on the split hint spec. Each worker task (type partial_dimension_distribution) reads the assigned split and builds a histogram for partitionDimension. The Parallel task collects those histograms from worker tasks and finds the best range partitioning based on partitionDimension to evenly distribute rows across partitions. Note that either targetRowsPerSegment or maxRowsPerSegment will be used to find the best partitioning.
  • In the partial segment generation phase, the Parallel task spawns new worker tasks (type partial_range_index_generate) to create partitioned data. Each worker task reads a split created as in the previous phase, partitions rows by the time chunk from the segmentGranularity (primary partition key) in the granularitySpec and then by the range partitioning found in the previous phase. The partitioned data is stored in local storage of the middleManager or the indexer.
  • In the partial segment merge phase, the parallel index task spawns a new set of worker tasks (type partial_index_generic_merge) to merge the partitioned data created in the previous phase. Here, the partitioned data is shuffled based on the time chunk and the value of partitionDimension; each worker task reads the segments falling in the same partition of the same range from multiple MiddleManager/Indexer processes and merges them to create the final segments. Finally, they push the final segments to the deep storage.

Because the task with single-dimension range partitioning makes two passes over the input in partial dimension distribution and partial segment generation phases, the task may fail if the input changes in between the two passes.

HTTP status endpoints

The supervisor task provides some HTTP endpoints to get running status.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/mode

Returns 'parallel' if the indexing task is running in parallel. Otherwise, it returns 'sequential'.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/phase

Returns the name of the current phase if the task running in the parallel mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/progress

Returns the estimated progress of the current phase if the supervisor task is running in the parallel mode.

An example of the result is

{
  "running":10,
  "succeeded":0,
  "failed":0,
  "complete":0,
  "total":10,
  "estimatedExpectedSucceeded":10
}
  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtasks/running

Returns the task IDs of running worker tasks, or an empty list if the supervisor task is running in the sequential mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs

Returns all worker task specs, or an empty list if the supervisor task is running in the sequential mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs/running

Returns running worker task specs, or an empty list if the supervisor task is running in the sequential mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs/complete

Returns complete worker task specs, or an empty list if the supervisor task is running in the sequential mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}

Returns the worker task spec of the given id, or HTTP 404 Not Found error if the supervisor task is running in the sequential mode.

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}/state

Returns the state of the worker task spec of the given id, or HTTP 404 Not Found error if the supervisor task is running in the sequential mode. The returned result contains the worker task spec, a current task status if exists, and task attempt history.

An example of the result is

{
  "spec": {
    "id": "index_parallel_lineitem_2018-04-20T22:12:43.610Z_2",
    "groupId": "index_parallel_lineitem_2018-04-20T22:12:43.610Z",
    "supervisorTaskId": "index_parallel_lineitem_2018-04-20T22:12:43.610Z",
    "context": null,
    "inputSplit": {
      "split": "/path/to/data/lineitem.tbl.5"
    },
    "ingestionSpec": {
      "dataSchema": {
        "dataSource": "lineitem",
        "timestampSpec": {
          "column": "l_shipdate",
          "format": "yyyy-MM-dd"
        },
        "dimensionsSpec": {
          "dimensions": [
            "l_orderkey",
            "l_partkey",
            "l_suppkey",
            "l_linenumber",
            "l_returnflag",
            "l_linestatus",
            "l_shipdate",
            "l_commitdate",
            "l_receiptdate",
            "l_shipinstruct",
            "l_shipmode",
            "l_comment"
          ]
        },
        "metricsSpec": [
          {
            "type": "count",
            "name": "count"
          },
          {
            "type": "longSum",
            "name": "l_quantity",
            "fieldName": "l_quantity",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_extendedprice",
            "fieldName": "l_extendedprice",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_discount",
            "fieldName": "l_discount",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_tax",
            "fieldName": "l_tax",
            "expression": null
          }
        ],
        "granularitySpec": {
          "type": "uniform",
          "segmentGranularity": "YEAR",
          "queryGranularity": {
            "type": "none"
          },
          "rollup": true,
          "intervals": [
            "1980-01-01T00:00:00.000Z/2020-01-01T00:00:00.000Z"
          ]
        },
        "transformSpec": {
          "filter": null,
          "transforms": []
        }
      },
      "ioConfig": {
        "type": "index_parallel",
        "inputSource": {
          "type": "local",
          "baseDir": "/path/to/data/",
          "filter": "lineitem.tbl.5"
        },
        "inputFormat": {
          "format": "tsv",
          "delimiter": "|",
          "columns": [
            "l_orderkey",
            "l_partkey",
            "l_suppkey",
            "l_linenumber",
            "l_quantity",
            "l_extendedprice",
            "l_discount",
            "l_tax",
            "l_returnflag",
            "l_linestatus",
            "l_shipdate",
            "l_commitdate",
            "l_receiptdate",
            "l_shipinstruct",
            "l_shipmode",
            "l_comment"
          ]
        },
        "appendToExisting": false,
        "dropExisting": false
      },
      "tuningConfig": {
        "type": "index_parallel",
        "maxRowsPerSegment": 5000000,
        "maxRowsInMemory": 1000000,
        "maxTotalRows": 20000000,
        "numShards": null,
        "indexSpec": {
          "bitmap": {
            "type": "roaring"
          },
          "dimensionCompression": "lz4",
          "metricCompression": "lz4",
          "longEncoding": "longs"
        },
        "indexSpecForIntermediatePersists": {
          "bitmap": {
            "type": "roaring"
          },
          "dimensionCompression": "lz4",
          "metricCompression": "lz4",
          "longEncoding": "longs"
        },
        "maxPendingPersists": 0,
        "reportParseExceptions": false,
        "pushTimeout": 0,
        "segmentWriteOutMediumFactory": null,
        "maxNumConcurrentSubTasks": 4,
        "maxRetry": 3,
        "taskStatusCheckPeriodMs": 1000,
        "chatHandlerTimeout": "PT10S",
        "chatHandlerNumRetries": 5,
        "logParseExceptions": false,
        "maxParseExceptions": 2147483647,
        "maxSavedParseExceptions": 0,
        "forceGuaranteedRollup": false,
        "buildV9Directly": true
      }
    }
  },
  "currentStatus": {
    "id": "index_sub_lineitem_2018-04-20T22:16:29.922Z",
    "type": "index_sub",
    "createdTime": "2018-04-20T22:16:29.925Z",
    "queueInsertionTime": "2018-04-20T22:16:29.929Z",
    "statusCode": "RUNNING",
    "duration": -1,
    "location": {
      "host": null,
      "port": -1,
      "tlsPort": -1
    },
    "dataSource": "lineitem",
    "errorMsg": null
  },
  "taskHistory": []
}
  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}/history

Returns the task attempt history of the worker task spec of the given id, or HTTP 404 Not Found error if the supervisor task is running in the sequential mode.

Capacity planning

The supervisor task can create up to maxNumConcurrentSubTasks worker tasks no matter how many task slots are currently available. As a result, total number of tasks which can be run at the same time is (maxNumConcurrentSubTasks + 1) (including the supervisor task). Please note that this can be even larger than total number of task slots (sum of the capacity of all workers). If maxNumConcurrentSubTasks is larger than n (available task slots), then maxNumConcurrentSubTasks tasks are created by the supervisor task, but only n tasks would be started. Others will wait in the pending state until any running task is finished.

If you are using the Parallel Index Task with stream ingestion together, we would recommend to limit the max capacity for batch ingestion to prevent stream ingestion from being blocked by batch ingestion. Suppose you have t Parallel Index Tasks to run at the same time, but want to limit the max number of tasks for batch ingestion to b. Then, (sum of maxNumConcurrentSubTasks of all Parallel Index Tasks + t (for supervisor tasks)) must be smaller than b.

If you have some tasks of a higher priority than others, you may set their maxNumConcurrentSubTasks to a higher value than lower priority tasks. This may help the higher priority tasks to finish earlier than lower priority tasks by assigning more task slots to them.

Simple task

The simple task (type index) is designed to be used for smaller data sets. The task executes within the indexing service.

Task syntax

A sample task is shown below:

{
  "type" : "index",
  "spec" : {
    "dataSchema" : {
      "dataSource" : "wikipedia",
      "timestampSpec" : {
        "column" : "timestamp",
        "format" : "auto"
      },
      "dimensionsSpec" : {
        "dimensions": ["page","language","user","unpatrolled","newPage","robot","anonymous","namespace","continent","country","region","city"],
        "dimensionExclusions" : []
      },
      "metricsSpec" : [
        {
          "type" : "count",
          "name" : "count"
        },
        {
          "type" : "doubleSum",
          "name" : "added",
          "fieldName" : "added"
        },
        {
          "type" : "doubleSum",
          "name" : "deleted",
          "fieldName" : "deleted"
        },
        {
          "type" : "doubleSum",
          "name" : "delta",
          "fieldName" : "delta"
        }
      ],
      "granularitySpec" : {
        "type" : "uniform",
        "segmentGranularity" : "DAY",
        "queryGranularity" : "NONE",
        "intervals" : [ "2013-08-31/2013-09-01" ]
      }
    },
    "ioConfig" : {
      "type" : "index",
      "inputSource" : {
        "type" : "local",
        "baseDir" : "examples/indexing/",
        "filter" : "wikipedia_data.json"
       },
       "inputFormat": {
         "type": "json"
       }
    },
    "tuningConfig" : {
      "type" : "index",
      "maxRowsPerSegment" : 5000000,
      "maxRowsInMemory" : 1000000
    }
  }
}
property description required?
type The task type, this should always be index. yes
id The task ID. If this is not explicitly specified, Druid generates the task ID using task type, data source name, interval, and date-time stamp. no
spec The ingestion spec including the data schema, IOConfig, and TuningConfig. See below for more details. yes
context Context containing various task configuration parameters. See below for more details. no

dataSchema

This field is required.

See the dataSchema section of the ingestion docs for details.

If you do not specify intervals explicitly in your dataSchema's granularitySpec, the Local Index Task will do an extra pass over the data to determine the range to lock when it starts up. If you specify intervals explicitly, any rows outside the specified intervals will be thrown away. We recommend setting intervals explicitly if you know the time range of the data because it allows the task to skip the extra pass, and so that you don't accidentally replace data outside that range if there's some stray data with unexpected timestamps.

ioConfig

property description default required?
type The task type, this should always be "index". none yes
inputFormat inputFormat to specify how to parse input data. none yes
appendToExisting Creates segments as additional shards of the latest version, effectively appending to the segment set instead of replacing it. This means that you can append new segments to any datasource regardless of its original partitioning scheme. You must use the dynamic partitioning type for the appended segments. If you specify a different partitioning type, the task fails with an error. false no
dropExisting If true and appendToExisting is false and the granularitySpec contains aninterval, then the ingestion task drops (mark unused) all existing segments fully contained by the specified interval when the task publishes new segments. If ingestion fails, Druid does not drop or mark unused any segments. In the case of misconfiguration where either appendToExisting is true or interval is not specified in granularitySpec, Druid does not drop any segments even if dropExisting is true. WARNING: this functionality is still in beta and can result in temporary data unavailability for data within the specified interval. false no

tuningConfig

The tuningConfig is optional and default parameters will be used if no tuningConfig is specified. See below for more details.

property description default required?
type The task type, this should always be "index". none yes
maxRowsPerSegment Deprecated. Use partitionsSpec instead. Used in sharding. Determines how many rows are in each segment. 5000000 no
maxRowsInMemory Used in determining when intermediate persists to disk should occur. Normally user does not need to set this, but depending on the nature of data, if rows are short in terms of bytes, user may not want to store a million rows in memory and this value should be set. 1000000 no
maxBytesInMemory Used in determining when intermediate persists to disk should occur. Normally this is computed internally and user does not need to set it. This value represents number of bytes to aggregate in heap memory before persisting. This is based on a rough estimate of memory usage and not actual usage. The maximum heap memory usage for indexing is maxBytesInMemory * (2 + maxPendingPersists). Note that maxBytesInMemory also includes heap usage of artifacts created from intermediary persists. This means that after every persist, the amount of maxBytesInMemory until next persist will decreases, and task will fail when the sum of bytes of all intermediary persisted artifacts exceeds maxBytesInMemory. 1/6 of max JVM memory no
maxTotalRows Deprecated. Use partitionsSpec instead. Total number of rows in segments waiting for being pushed. Used in determining when intermediate pushing should occur. 20000000 no
numShards Deprecated. Use partitionsSpec instead. Directly specify the number of shards to create. If this is specified and intervals is specified in the granularitySpec, the index task can skip the determine intervals/partitions pass through the data. numShards cannot be specified if maxRowsPerSegment is set. null no
partitionDimensions Deprecated. Use partitionsSpec instead. The dimensions to partition on. Leave blank to select all dimensions. Only used with forceGuaranteedRollup = true, will be ignored otherwise. null no
partitionsSpec Defines how to partition data in each timeChunk, see PartitionsSpec dynamic if forceGuaranteedRollup = false, hashed if forceGuaranteedRollup = true no
indexSpec Defines segment storage format options to be used at indexing time, see IndexSpec null no
indexSpecForIntermediatePersists Defines segment storage format options to be used at indexing time for intermediate persisted temporary segments. this can be used to disable dimension/metric compression on intermediate segments to reduce memory required for final merging. however, disabling compression on intermediate segments might increase page cache use while they are used before getting merged into final segment published, see IndexSpec for possible values. same as indexSpec no
maxPendingPersists Maximum number of persists that can be pending but not started. If this limit would be exceeded by a new intermediate persist, ingestion will block until the currently-running persist finishes. Maximum heap memory usage for indexing scales with maxRowsInMemory * (2 + maxPendingPersists). 0 (meaning one persist can be running concurrently with ingestion, and none can be queued up) no
forceGuaranteedRollup Forces guaranteeing the perfect rollup. The perfect rollup optimizes the total size of generated segments and querying time while indexing time will be increased. If this is set to true, the index task will read the entire input data twice: one for finding the optimal number of partitions per time chunk and one for generating segments. Note that the result segments would be hash-partitioned. This flag cannot be used with appendToExisting of IOConfig. For more details, see the below Segment pushing modes section. false no
reportParseExceptions DEPRECATED. If true, exceptions encountered during parsing will be thrown and will halt ingestion; if false, unparseable rows and fields will be skipped. Setting reportParseExceptions to true will override existing configurations for maxParseExceptions and maxSavedParseExceptions, setting maxParseExceptions to 0 and limiting maxSavedParseExceptions to no more than 1. false no
pushTimeout Milliseconds to wait for pushing segments. It must be >= 0, where 0 means to wait forever. 0 no
segmentWriteOutMediumFactory Segment write-out medium to use when creating segments. See SegmentWriteOutMediumFactory. Not specified, the value from druid.peon.defaultSegmentWriteOutMediumFactory.type is used no
logParseExceptions If true, log an error message when a parsing exception occurs, containing information about the row where the error occurred. false no
maxParseExceptions The maximum number of parse exceptions that can occur before the task halts ingestion and fails. Overridden if reportParseExceptions is set. unlimited no
maxSavedParseExceptions When a parse exception occurs, Druid can keep track of the most recent parse exceptions. "maxSavedParseExceptions" limits how many exception instances will be saved. These saved exceptions will be made available after the task finishes in the task completion report. Overridden if reportParseExceptions is set. 0 no

partitionsSpec

PartitionsSpec is to describe the secondary partitioning method. You should use different partitionsSpec depending on the rollup mode you want. For perfect rollup, you should use hashed.

property description default required?
type This should always be hashed none yes
maxRowsPerSegment Used in sharding. Determines how many rows are in each segment. 5000000 no
numShards Directly specify the number of shards to create. If this is specified and intervals is specified in the granularitySpec, the index task can skip the determine intervals/partitions pass through the data. numShards cannot be specified if maxRowsPerSegment is set. null no
partitionDimensions The dimensions to partition on. Leave blank to select all dimensions. null no
partitionFunction A function to compute hash of partition dimensions. See Hash partition function murmur3_32_abs no

For best-effort rollup, you should use dynamic.

property description default required?
type This should always be dynamic none yes
maxRowsPerSegment Used in sharding. Determines how many rows are in each segment. 5000000 no
maxTotalRows Total number of rows in segments waiting for being pushed. 20000000 no

segmentWriteOutMediumFactory

Field Type Description Required
type String See Additional Peon Configuration: SegmentWriteOutMediumFactory for explanation and available options. yes

Segment pushing modes

While ingesting data using the Index task, it creates segments from the input data and pushes them. For segment pushing, the Index task supports two segment pushing modes, i.e., bulk pushing mode and incremental pushing mode for perfect rollup and best-effort rollup, respectively.

In the bulk pushing mode, every segment is pushed at the very end of the index task. Until then, created segments are stored in the memory and local storage of the process running the index task. As a result, this mode might cause a problem due to limited storage capacity, and is not recommended to use in production.

On the contrary, in the incremental pushing mode, segments are incrementally pushed, that is they can be pushed in the middle of the index task. More precisely, the index task collects data and stores created segments in the memory and disks of the process running that task until the total number of collected rows exceeds maxTotalRows. Once it exceeds, the index task immediately pushes all segments created until that moment, cleans all pushed segments up, and continues to ingest remaining data.

To enable bulk pushing mode, forceGuaranteedRollup should be set in the TuningConfig. Note that this option cannot be used with appendToExisting of IOConfig.

Input Sources

The input source is the place to define from where your index task reads data. Only the native Parallel task and Simple task support the input source.

S3 Input Source

You need to include the druid-s3-extensions as an extension to use the S3 input source.

The S3 input source is to support reading objects directly from S3. Objects can be specified either via a list of S3 URI strings or a list of S3 location prefixes, which will attempt to list the contents and ingest all objects contained in the locations. The S3 input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read one or multiple objects.

Sample specs:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "uris": ["s3://foo/bar/file.json", "s3://bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "prefixes": ["s3://foo/bar/", "s3://bar/foo/"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "objects": [
          { "bucket": "foo", "path": "bar/file1.json"},
          { "bucket": "bar", "path": "foo/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
property description default required?
type This should be s3. None yes
uris JSON array of URIs where S3 objects to be ingested are located. None uris or prefixes or objects must be set
prefixes JSON array of URI prefixes for the locations of S3 objects to be ingested. Empty objects starting with one of the given prefixes will be skipped. None uris or prefixes or objects must be set
objects JSON array of S3 Objects to be ingested. None uris or prefixes or objects must be set
properties Properties Object for overriding the default S3 configuration. See below for more information. None No (defaults will be used if not given)

Note that the S3 input source will skip all empty objects only when prefixes is specified.

S3 Object:

property description default required?
bucket Name of the S3 bucket None yes
path The path where data is located. None yes

Properties Object:

property description default required?
accessKeyId The Password Provider or plain text string of this S3 InputSource's access key None yes if secretAccessKey is given
secretAccessKey The Password Provider or plain text string of this S3 InputSource's secret key None yes if accessKeyId is given

Note : If accessKeyId and secretAccessKey are not given, the default S3 credentials provider chain is used.

Google Cloud Storage Input Source

You need to include the druid-google-extensions as an extension to use the Google Cloud Storage input source.

The Google Cloud Storage input source is to support reading objects directly from Google Cloud Storage. Objects can be specified as list of Google Cloud Storage URI strings. The Google Cloud Storage input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read one or multiple objects.

Sample specs:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "uris": ["gs://foo/bar/file.json", "gs://bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "prefixes": ["gs://foo/bar/", "gs://bar/foo/"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "objects": [
          { "bucket": "foo", "path": "bar/file1.json"},
          { "bucket": "bar", "path": "foo/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
property description default required?
type This should be google. None yes
uris JSON array of URIs where Google Cloud Storage objects to be ingested are located. None uris or prefixes or objects must be set
prefixes JSON array of URI prefixes for the locations of Google Cloud Storage objects to be ingested. Empty objects starting with one of the given prefixes will be skipped. None uris or prefixes or objects must be set
objects JSON array of Google Cloud Storage objects to be ingested. None uris or prefixes or objects must be set

Note that the Google Cloud Storage input source will skip all empty objects only when prefixes is specified.

Google Cloud Storage object:

property description default required?
bucket Name of the Google Cloud Storage bucket None yes
path The path where data is located. None yes

Azure Input Source

You need to include the druid-azure-extensions as an extension to use the Azure input source.

The Azure input source is to support reading objects directly from Azure Blob store. Objects can be specified as list of Azure Blob store URI strings. The Azure input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read a single object.

Sample specs:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "uris": ["azure://container/prefix1/file.json", "azure://container/prefix2/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "prefixes": ["azure://container/prefix1/", "azure://container/prefix2/"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "objects": [
          { "bucket": "container", "path": "prefix1/file1.json"},
          { "bucket": "container", "path": "prefix2/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
property description default required?
type This should be azure. None yes
uris JSON array of URIs where Azure Blob objects to be ingested are located. Should be in form "azure://<container>/<path-to-file>" None uris or prefixes or objects must be set
prefixes JSON array of URI prefixes for the locations of Azure Blob objects to be ingested. Should be in the form "azure://<container>/<prefix>". Empty objects starting with one of the given prefixes will be skipped. None uris or prefixes or objects must be set
objects JSON array of Azure Blob objects to be ingested. None uris or prefixes or objects must be set

Note that the Azure input source will skip all empty objects only when prefixes is specified.

Azure Blob object:

property description default required?
bucket Name of the Azure Blob Storage container None yes
path The path where data is located. None yes

HDFS Input Source

You need to include the druid-hdfs-storage as an extension to use the HDFS input source.

The HDFS input source is to support reading files directly from HDFS storage. File paths can be specified as an HDFS URI string or a list of HDFS URI strings. The HDFS input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read one or multiple files.

Sample specs:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": "hdfs://namenode_host/foo/bar/", "hdfs://namenode_host/bar/foo"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": "hdfs://namenode_host/foo/bar/", "hdfs://namenode_host/bar/foo"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": "hdfs://namenode_host/foo/bar/file.json", "hdfs://namenode_host/bar/foo/file2.json"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": ["hdfs://namenode_host/foo/bar/file.json", "hdfs://namenode_host/bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
property description default required?
type This should be hdfs. None yes
paths HDFS paths. Can be either a JSON array or comma-separated string of paths. Wildcards like * are supported in these paths. Empty files located under one of the given paths will be skipped. None yes

You can also ingest from other storage using the HDFS input source if the HDFS client supports that storage. However, if you want to ingest from cloud storage, consider using the service-specific input source for your data storage. If you want to use a non-hdfs protocol with the HDFS input source, include the protocol in druid.ingestion.hdfs.allowedProtocols. See HDFS input source security configuration for more details.

HTTP Input Source

The HTTP input source is to support reading files directly from remote sites via HTTP.

NOTE: Ingestion tasks run under the operating system account that runs the Druid processes, for example the Indexer, Middle Manager, and Peon. This means any user who can submit an ingestion task can specify an HTTPInputSource at any location where the Druid process has permissions. For example, using HTTPInputSource, a console user has access to internal network locations where the they would be denied access otherwise.

WARNING: HTTPInputSource is not limited to the HTTP or HTTPS protocols. It uses the Java URI class that supports HTTP, HTTPS, FTP, file, and jar protocols by default. This means you should never run Druid under the root account, because a user can use the file protocol to access any files on the local disk.

For more information about security best practices, see Security overview.

The HTTP input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read only one file. This input source does not support Split Hint Spec.

Sample specs:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...

Example with authentication fields using the DefaultPassword provider (this requires the password to be in the ingestion spec):

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
        "httpAuthenticationUsername": "username",
        "httpAuthenticationPassword": "password123"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...

You can also use the other existing Druid PasswordProviders. Here is an example using the EnvironmentVariablePasswordProvider:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
        "httpAuthenticationUsername": "username",
        "httpAuthenticationPassword": {
          "type": "environment",
          "variable": "HTTP_INPUT_SOURCE_PW"
        }
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
}
property description default required?
type This should be http None yes
uris URIs of the input files. See below for the protocols allowed for URIs. None yes
httpAuthenticationUsername Username to use for authentication with specified URIs. Can be optionally used if the URIs specified in the spec require a Basic Authentication Header. None no
httpAuthenticationPassword PasswordProvider to use with specified URIs. Can be optionally used if the URIs specified in the spec require a Basic Authentication Header. None no

You can only use protocols listed in the druid.ingestion.http.allowedProtocols property as HTTP input sources. The http and https protocols are allowed by default. See HTTP input source security configuration for more details.

Inline Input Source

The Inline input source can be used to read the data inlined in its own spec. It can be used for demos or for quickly testing out parsing and schema.

Sample spec:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "inline",
        "data": "0,values,formatted\n1,as,CSV"
      },
      "inputFormat": {
        "type": "csv"
      },
      ...
    },
...
property description required?
type This should be "inline". yes
data Inlined data to ingest. yes

Local Input Source

The Local input source is to support reading files directly from local storage, and is mainly intended for proof-of-concept testing. The Local input source is splittable and can be used by the Parallel task, where each worker task of index_parallel will read one or multiple files.

Sample spec:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "local",
        "filter" : "*.csv",
        "baseDir": "/data/directory",
        "files": ["/bar/foo", "/foo/bar"]
      },
      "inputFormat": {
        "type": "csv"
      },
      ...
    },
...
property description required?
type This should be "local". yes
filter A wildcard filter for files. See here for more information. yes if baseDir is specified
baseDir Directory to search recursively for files to be ingested. Empty files under the baseDir will be skipped. At least one of baseDir or files should be specified
files File paths to ingest. Some files can be ignored to avoid ingesting duplicate files if they are located under the specified baseDir. Empty files will be skipped. At least one of baseDir or files should be specified

Druid Input Source

The Druid input source is to support reading data directly from existing Druid segments, potentially using a new schema and changing the name, dimensions, metrics, rollup, etc. of the segment. The Druid input source is splittable and can be used by the Parallel task. This input source has a fixed input format for reading from Druid segments; no inputFormat field needs to be specified in the ingestion spec when using this input source.

property description required?
type This should be "druid". yes
dataSource A String defining the Druid datasource to fetch rows from yes
interval A String representing an ISO-8601 interval, which defines the time range to fetch the data over. yes
filter See Filters. Only rows that match the filter, if specified, will be returned. no

The Druid input source can be used for a variety of purposes, including:

  • Creating new datasources that are rolled-up copies of existing datasources.
  • Changing the partitioning or sorting of a datasource to improve performance.
  • Updating or removing rows using a transformSpec.

When using the Druid input source, the timestamp column shows up as a numeric field named __time set to the number of milliseconds since the epoch (January 1, 1970 00:00:00 UTC). It is common to use this in the timestampSpec, if you want the output timestamp to be equivalent to the input timestamp. In this case, set the timestamp column to __time and the format to auto or millis.

It is OK for the input and output datasources to be the same. In this case, newly generated data will overwrite the previous data for the intervals specified in the granularitySpec. Generally, if you are going to do this, it is a good idea to test out your reindexing by writing to a separate datasource before overwriting your main one. Alternatively, if your goals can be satisfied by compaction, consider that instead as a simpler approach.

An example task spec is shown below. It reads from a hypothetical raw datasource wikipedia_raw and creates a new rolled-up datasource wikipedia_rollup by grouping on hour, "countryName", and "page".

{
  "type": "index_parallel",
  "spec": {
    "dataSchema": {
      "dataSource": "wikipedia_rollup",
      "timestampSpec": {
        "column": "__time",
        "format": "millis"
      },
      "dimensionsSpec": {
        "dimensions": [
          "countryName",
          "page"
        ]
      },
      "metricsSpec": [
        {
          "type": "count",
          "name": "cnt"
        }
      ],
      "granularitySpec": {
        "type": "uniform",
        "queryGranularity": "HOUR",
        "segmentGranularity": "DAY",
        "intervals": ["2016-06-27/P1D"],
        "rollup": true
      }
    },
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "druid",
        "dataSource": "wikipedia_raw",
        "interval": "2016-06-27/P1D"
      }
    },
    "tuningConfig": {
      "type": "index_parallel",
      "partitionsSpec": {
        "type": "hashed"
      },
      "forceGuaranteedRollup": true,
      "maxNumConcurrentSubTasks": 1
    }
  }
}

Note: Older versions (0.19 and earlier) did not respect the timestampSpec when using the Druid input source. If you have ingestion specs that rely on this and cannot rewrite them, set druid.indexer.task.ignoreTimestampSpecForDruidInputSource to true to enable a compatibility mode where the timestampSpec is ignored.

SQL Input Source

The SQL input source is used to read data directly from RDBMS. The SQL input source is splittable and can be used by the Parallel task, where each worker task will read from one SQL query from the list of queries. This input source does not support Split Hint Spec. Since this input source has a fixed input format for reading events, no inputFormat field needs to be specified in the ingestion spec when using this input source. Please refer to the Recommended practices section below before using this input source.

property description required?
type This should be "sql". Yes
database Specifies the database connection details. The database type corresponds to the extension that supplies the connectorConfig support. The specified extension must be loaded into Druid:



You can selectively allow JDBC properties in connectURI. See JDBC connections security config for more details.
Yes
foldCase Toggle case folding of database column names. This may be enabled in cases where the database returns case insensitive column names in query results. No
sqls List of SQL queries where each SQL query would retrieve the data to be indexed. Yes

An example SqlInputSource spec is shown below:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "sql",
        "database": {
            "type": "mysql",
            "connectorConfig": {
                "connectURI": "jdbc:mysql://host:port/schema",
                "user": "user",
                "password": "password"
            }
        },
        "sqls": ["SELECT * FROM table1 WHERE timestamp BETWEEN '2013-01-01 00:00:00' AND '2013-01-01 11:59:59'", "SELECT * FROM table2 WHERE timestamp BETWEEN '2013-01-01 00:00:00' AND '2013-01-01 11:59:59'"]
      }
    },
...

The spec above will read all events from two separate SQLs for the interval 2013-01-01/2013-01-02. Each of the SQL queries will be run in its own sub-task and thus for the above example, there would be two sub-tasks.

Recommended practices

Compared to the other native batch InputSources, SQL InputSource behaves differently in terms of reading the input data and so it would be helpful to consider the following points before using this InputSource in a production environment:

  • During indexing, each sub-task would execute one of the SQL queries and the results are stored locally on disk. The sub-tasks then proceed to read the data from these local input files and generate segments. Presently, there isnt any restriction on the size of the generated files and this would require the MiddleManagers or Indexers to have sufficient disk capacity based on the volume of data being indexed.

  • Filtering the SQL queries based on the intervals specified in the granularitySpec can avoid unwanted data being retrieved and stored locally by the indexing sub-tasks. For example, if the intervals specified in the granularitySpec is ["2013-01-01/2013-01-02"] and the SQL query is SELECT * FROM table1, SqlInputSource will read all the data for table1 based on the query, even though only data between the intervals specified will be indexed into Druid.

  • Pagination may be used on the SQL queries to ensure that each query pulls a similar amount of data, thereby improving the efficiency of the sub-tasks.

  • Similar to file-based input formats, any updates to existing data will replace the data in segments specific to the intervals specified in the granularitySpec.

Combining Input Source

The Combining input source is used to read data from multiple InputSources. This input source should be only used if all the delegate input sources are splittable and can be used by the Parallel task. This input source will identify the splits from its delegates and each split will be processed by a worker task. Similar to other input sources, this input source supports a single inputFormat. Therefore, please note that delegate input sources requiring an inputFormat must have the same format for input data.

property description required?
type This should be "combining". Yes
delegates List of splittable InputSources to read data from. Yes

Sample spec:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "combining",
        "delegates" : [
         {
          "type": "local",
          "filter" : "*.csv",
          "baseDir": "/data/directory",
          "files": ["/bar/foo", "/foo/bar"]
         },
         {
          "type": "druid",
          "dataSource": "wikipedia",
          "interval": "2013-01-01/2013-01-02"
         }
        ]
      },
      "inputFormat": {
        "type": "csv"
      },
      ...
    },
...

Firehoses (Deprecated)

Firehoses are deprecated in 0.17.0. It's highly recommended to use the Input source instead. There are several firehoses readily available in Druid, some are meant for examples, others can be used directly in a production environment.

StaticS3Firehose

You need to include the druid-s3-extensions as an extension to use the StaticS3Firehose.

This firehose ingests events from a predefined list of S3 objects. This firehose is splittable and can be used by the Parallel task. Since each split represents an object in this firehose, each worker task of index_parallel will read an object.

Sample spec:

"firehose" : {
    "type" : "static-s3",
    "uris": ["s3://foo/bar/file.gz", "s3://bar/foo/file2.gz"]
}

This firehose provides caching and prefetching features. In the Simple task, a firehose can be read twice if intervals or shardSpecs are not specified, and, in this case, caching can be useful. Prefetching is preferred when direct scan of objects is slow. Note that prefetching or caching isn't that useful in the Parallel task.

property description default required?
type This should be static-s3. None yes
uris JSON array of URIs where s3 files to be ingested are located. None uris or prefixes must be set
prefixes JSON array of URI prefixes for the locations of s3 files to be ingested. None uris or prefixes must be set
maxCacheCapacityBytes Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes. 1073741824 no
maxFetchCapacityBytes Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read. 1073741824 no
prefetchTriggerBytes Threshold to trigger prefetching s3 objects. maxFetchCapacityBytes / 2 no
fetchTimeout Timeout for fetching an s3 object. 60000 no
maxFetchRetry Maximum retry for fetching an s3 object. 3 no

StaticGoogleBlobStoreFirehose

You need to include the druid-google-extensions as an extension to use the StaticGoogleBlobStoreFirehose.

This firehose ingests events, similar to the StaticS3Firehose, but from an Google Cloud Store.

As with the S3 blobstore, it is assumed to be gzipped if the extension ends in .gz

This firehose is splittable and can be used by the Parallel task. Since each split represents an object in this firehose, each worker task of index_parallel will read an object.

Sample spec:

"firehose" : {
    "type" : "static-google-blobstore",
    "blobs": [
        {
          "bucket": "foo",
          "path": "/path/to/your/file.json"
        },
        {
          "bucket": "bar",
          "path": "/another/path.json"
        }
    ]
}

This firehose provides caching and prefetching features. In the Simple task, a firehose can be read twice if intervals or shardSpecs are not specified, and, in this case, caching can be useful. Prefetching is preferred when direct scan of objects is slow. Note that prefetching or caching isn't that useful in the Parallel task.

property description default required?
type This should be static-google-blobstore. None yes
blobs JSON array of Google Blobs. None yes
maxCacheCapacityBytes Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes. 1073741824 no
maxFetchCapacityBytes Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read. 1073741824 no
prefetchTriggerBytes Threshold to trigger prefetching Google Blobs. maxFetchCapacityBytes / 2 no
fetchTimeout Timeout for fetching a Google Blob. 60000 no
maxFetchRetry Maximum retry for fetching a Google Blob. 3 no

Google Blobs:

property description default required?
bucket Name of the Google Cloud bucket None yes
path The path where data is located. None yes

HDFSFirehose

You need to include the druid-hdfs-storage as an extension to use the HDFSFirehose.

This firehose ingests events from a predefined list of files from the HDFS storage. This firehose is splittable and can be used by the Parallel task. Since each split represents an HDFS file, each worker task of index_parallel will read files.

Sample spec:

"firehose" : {
    "type" : "hdfs",
    "paths": "/foo/bar,/foo/baz"
}

This firehose provides caching and prefetching features. During native batch indexing, a firehose can be read twice if intervals are not specified, and, in this case, caching can be useful. Prefetching is preferred when direct scanning of files is slow. Note that prefetching or caching isn't that useful in the Parallel task.

Property Description Default
type This should be hdfs. none (required)
paths HDFS paths. Can be either a JSON array or comma-separated string of paths. Wildcards like * are supported in these paths. none (required)
maxCacheCapacityBytes Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes. 1073741824
maxFetchCapacityBytes Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read. 1073741824
prefetchTriggerBytes Threshold to trigger prefetching files. maxFetchCapacityBytes / 2
fetchTimeout Timeout for fetching each file. 60000
maxFetchRetry Maximum number of retries for fetching each file. 3

You can also ingest from other storage using the HDFS firehose if the HDFS client supports that storage. However, if you want to ingest from cloud storage, consider using the service-specific input source for your data storage. If you want to use a non-hdfs protocol with the HDFS firehose, you need to include the protocol you want in druid.ingestion.hdfs.allowedProtocols. See HDFS firehose security configuration for more details.

LocalFirehose

This Firehose can be used to read the data from files on local disk, and is mainly intended for proof-of-concept testing, and works with string typed parsers. This Firehose is splittable and can be used by native parallel index tasks. Since each split represents a file in this Firehose, each worker task of index_parallel will read a file. A sample local Firehose spec is shown below:

{
    "type": "local",
    "filter" : "*.csv",
    "baseDir": "/data/directory"
}
property description required?
type This should be "local". yes
filter A wildcard filter for files. See here for more information. yes
baseDir directory to search recursively for files to be ingested. yes

HttpFirehose

This Firehose can be used to read the data from remote sites via HTTP, and works with string typed parsers. This Firehose is splittable and can be used by native parallel index tasks. Since each split represents a file in this Firehose, each worker task of index_parallel will read a file. A sample HTTP Firehose spec is shown below:

{
    "type": "http",
    "uris": ["http://example.com/uri1", "http://example2.com/uri2"]
}

You can only use protocols listed in the druid.ingestion.http.allowedProtocols property as HTTP firehose input sources. The http and https protocols are allowed by default. See HTTP firehose security configuration for more details.

The below configurations can be optionally used if the URIs specified in the spec require a Basic Authentication Header. Omitting these fields from your spec will result in HTTP requests with no Basic Authentication Header.

property description default
httpAuthenticationUsername Username to use for authentication with specified URIs None
httpAuthenticationPassword PasswordProvider to use with specified URIs None

Example with authentication fields using the DefaultPassword provider (this requires the password to be in the ingestion spec):

{
    "type": "http",
    "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
    "httpAuthenticationUsername": "username",
    "httpAuthenticationPassword": "password123"
}

You can also use the other existing Druid PasswordProviders. Here is an example using the EnvironmentVariablePasswordProvider:

{
    "type": "http",
    "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
    "httpAuthenticationUsername": "username",
    "httpAuthenticationPassword": {
        "type": "environment",
        "variable": "HTTP_FIREHOSE_PW"
    }
}

The below configurations can optionally be used for tuning the Firehose performance. Note that prefetching or caching isn't that useful in the Parallel task.

property description default
maxCacheCapacityBytes Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes. 1073741824
maxFetchCapacityBytes Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read. 1073741824
prefetchTriggerBytes Threshold to trigger prefetching HTTP objects. maxFetchCapacityBytes / 2
fetchTimeout Timeout for fetching an HTTP object. 60000
maxFetchRetry Maximum retries for fetching an HTTP object. 3

IngestSegmentFirehose

This Firehose can be used to read the data from existing druid segments, potentially using a new schema and changing the name, dimensions, metrics, rollup, etc. of the segment. This Firehose is splittable and can be used by native parallel index tasks. This firehose will accept any type of parser, but will only utilize the list of dimensions and the timestamp specification. A sample ingest Firehose spec is shown below:

{
    "type": "ingestSegment",
    "dataSource": "wikipedia",
    "interval": "2013-01-01/2013-01-02"
}
property description required?
type This should be "ingestSegment". yes
dataSource A String defining the data source to fetch rows from, very similar to a table in a relational database yes
interval A String representing the ISO-8601 interval. This defines the time range to fetch the data over. yes
dimensions The list of dimensions to select. If left empty, no dimensions are returned. If left null or not defined, all dimensions are returned. no
metrics The list of metrics to select. If left empty, no metrics are returned. If left null or not defined, all metrics are selected. no
filter See Filters no
maxInputSegmentBytesPerTask Deprecated. Use Segments Split Hint Spec instead. When used with the native parallel index task, the maximum number of bytes of input segments to process in a single task. If a single segment is larger than this number, it will be processed by itself in a single task (input segments are never split across tasks). Defaults to 150MB. no

SqlFirehose

This Firehose can be used to ingest events residing in an RDBMS. The database connection information is provided as part of the ingestion spec. For each query, the results are fetched locally and indexed. If there are multiple queries from which data needs to be indexed, queries are prefetched in the background, up to maxFetchCapacityBytes bytes. This Firehose is splittable and can be used by native parallel index tasks. This firehose will accept any type of parser, but will only utilize the list of dimensions and the timestamp specification. See the extension documentation for more detailed ingestion examples.

Requires one of the following extensions:

{
    "type": "sql",
    "database": {
        "type": "mysql",
        "connectorConfig": {
            "connectURI": "jdbc:mysql://host:port/schema",
            "user": "user",
            "password": "password"
        }
     },
    "sqls": ["SELECT * FROM table1", "SELECT * FROM table2"]
}
property description default required?
type This should be "sql". Yes
database Specifies the database connection details. The database type corresponds to the extension that supplies the connectorConfig support. The specified extension must be loaded into Druid:



You can selectively allow JDBC properties in connectURI. See JDBC connections security config for more details.
Yes
maxCacheCapacityBytes Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes. 1073741824 No
maxFetchCapacityBytes Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read. 1073741824 No
prefetchTriggerBytes Threshold to trigger prefetching SQL result objects. maxFetchCapacityBytes / 2 No
fetchTimeout Timeout for fetching the result set. 60000 No
foldCase Toggle case folding of database column names. This may be enabled in cases where the database returns case insensitive column names in query results. false No
sqls List of SQL queries where each SQL query would retrieve the data to be indexed. Yes

Database

property description default required?
type The type of database to query. Valid values are mysql and postgresql_ Yes
connectorConfig Specify the database connection properties via connectURI, user and password Yes

InlineFirehose

This Firehose can be used to read the data inlined in its own spec. It can be used for demos or for quickly testing out parsing and schema, and works with string typed parsers. A sample inline Firehose spec is shown below:

{
    "type": "inline",
    "data": "0,values,formatted\n1,as,CSV"
}
property description required?
type This should be "inline". yes
data Inlined data to ingest. yes

CombiningFirehose

This Firehose can be used to combine and merge data from a list of different Firehoses.

{
    "type": "combining",
    "delegates": [ { firehose1 }, { firehose2 }, ... ]
}
property description required?
type This should be "combining" yes
delegates List of Firehoses to combine data from yes

本地批摄入

Apache Druid当前支持两种类型的本地批量索引任务 index_parallel 可以并行的运行多个任务, index运行单个索引任务。 详情可以查看 基于Hadoop的摄取vs基于本地批摄取的对比 来了解基于Hadoop的摄取、本地简单批摄取、本地并行摄取三者的比较。

要运行这两种类型的本地批索引任务请按以下指定编写摄取规范。然后将其发布到Overlord的 /druid/indexer/v1/task 接口或者使用druid附带的 bin/post-index-task

教程

此页包含本地批处理摄取的参考文档。相反,如果要进行演示,请查看 加载文件教程,该教程演示了"简单"(单任务)模式

并行任务

并行任务(index_parallel类型是用于并行批索引的任务。此任务只使用Druid的资源不依赖于其他外部系统如Hadoop。index_parallel 任务是一个supervisor任务它协调整个索引过程。supervisor分割输入数据并创建辅助任务来处理这些分割, 创建的worker将发布给Overlord以便在MiddleManager或Indexer上安排和运行。一旦worker成功处理分配的输入拆分它就会将生成的段列表报告给supervisor任务。supervisor定期检查工作任务的状态。如果其中一个失败它将重试失败的任务直到重试次数达到配置的限制。如果所有工作任务都成功它将立即发布报告的段并完成摄取。

并行任务的详细行为是不同的,取决于 partitionsSpec,详情可以查看 partitionsSpec

要使用此任务,ioConfig 中的 inputSource 应为splittable(可拆分的)tuningConfig 中的 maxNumConcurrentSubTasks 应设置为大于1。否则此任务将按顺序运行index_parallel 任务将逐个读取每个输入文件并自行创建段。目前支持的可拆分输入格式有:

  • s3 从AWS S3存储读取数据
  • gs 从谷歌云存储读取数据
  • azure 从Azure Blob存储读取数据
  • hdfs 从HDFS存储中读取数据
  • http 从HTTP服务中读取数据
  • local 从本地存储中读取数据
  • druid 从Druid数据源中读取数据

传统的 firehose 支持其他一些云存储类型。下面的 firehose 类型也是可拆分的。请注意,firehose 只支持文本格式。

您可能需要考虑以下事项:

  • 您可能希望控制每个worker进程的输入数据量。这可以使用不同的配置进行控制具体取决于并行摄取的阶段有关更多详细信息请参阅 partitionsSpec。对于从 inputSource 读取数据的任务,可以在 tuningConfig 中设置 分割提示规范。对于合并无序段的任务,可以在 tuningConfig 中设置totalNumMergeTasks
  • 并行摄取中并发worker的数量由 tuningConfig 中的maxNumConcurrentSubTasks 确定。supervisor检查当前正在运行的worker的数量如果小于 maxNumConcurrentSubTasks则无论当前有多少任务槽可用都会创建更多的worker。这可能会影响其他摄取性能。有关更多详细信息请参阅下面的 容量规划部分
  • 默认情况下,批量摄取将替换它写入的任何段中的所有数据(在granularitySpec 的间隔中)。如果您想添加到段中,请在 ioConfig 中设置 appendToExisting 标志。请注意,它只替换主动添加数据的段中的数据:如果 granularitySpec 的间隔中有段没有此任务写入的数据,则它们将被单独保留。如果任何现有段与 granularitySpec 的间隔部分重叠,则新段间隔之外的那些段的部分仍将可见。

任务符号

一个简易的任务如下所示:

{
  "type": "index_parallel",
  "spec": {
    "dataSchema": {
      "dataSource": "wikipedia_parallel_index_test",
      "timestampSpec": {
        "column": "timestamp"
      },
      "dimensionsSpec": {
        "dimensions": [
          "page",
          "language",
          "user",
          "unpatrolled",
          "newPage",
          "robot",
          "anonymous",
          "namespace",
          "continent",
          "country",
          "region",
          "city"
        ]
      },
      "metricsSpec": [
        {
          "type": "count",
              "name": "count"
            },
            {
              "type": "doubleSum",
              "name": "added",
              "fieldName": "added"
            },
            {
              "type": "doubleSum",
              "name": "deleted",
              "fieldName": "deleted"
            },
            {
              "type": "doubleSum",
              "name": "delta",
              "fieldName": "delta"
            }
        ],
        "granularitySpec": {
          "segmentGranularity": "DAY",
          "queryGranularity": "second",
          "intervals" : [ "2013-08-31/2013-09-02" ]
        }
    },
    "ioConfig": {
        "type": "index_parallel",
        "inputSource": {
          "type": "local",
          "baseDir": "examples/indexing/",
          "filter": "wikipedia_index_data*"
        },
        "inputFormat": {
          "type": "json"
        }
    },
    "tuningconfig": {
        "type": "index_parallel",
        "maxNumConcurrentSubTasks": 2
    }
  }
}
属性 描述 是否必须
type 任务类型,应当总是 index_parallel
id 任务ID。 如果该项没有显式的指定Druid将使用任务类型、数据源名称、时间间隔、日期时间戳生成一个任务ID
spec 摄取规范包括数据schema、IOConfig 和 TuningConfig。详情见下边详细描述
context Context包括了多个任务配置参数。详情见下边详细描述
dataSchema

该字段为必须字段。

可以参见 摄取规范中的dataSchema

如果在dataSchema的 granularitySpec 中显式地指定了 intervals则批处理摄取将锁定启动时指定的完整间隔并且您将快速了解指定间隔是否与其他任务例如Kafka摄取持有的锁重叠。否则在发现每个间隔时批处理摄取将锁定该间隔因此您可能只会在摄取过程中了解到该任务与较高优先级的任务重叠。如果显式指定 intervals,则指定间隔之外的任何行都将被丢弃。如果您知道数据的时间范围,我们建议显式地设置intervals,以便锁定失败发生得更快,并且如果有一些带有意外时间戳的杂散数据,您不会意外地替换该范围之外的数据。

ioConfig
属性 描述 默认 是否必须
type 任务类型, 应当总是 index_parallel none
inputFormat inputFormat 用来指定如何解析输入数据 none
appendToExisting 创建段作为最新版本的附加分片,有效地附加到段集而不是替换它。仅当现有段集具有可扩展类型 shardSpec时,此操作才有效。 false
tuningConfig

tuningConfig是一个可选项如果未指定则使用默认的参数。 详情如下:

属性 描述 默认 是否必须
type 任务类型,应当总是 index_parallel none
maxRowsPerSegment 已废弃。使用 partitionsSpec 替代,被用来分片。 决定在每个段中有多少行。 5000000
maxRowsInMemory 用于确定何时应该从中间层持久化到磁盘。通常用户不需要设置此值,但根据数据的性质,如果行的字节数较短,则用户可能不希望在内存中存储一百万行,应设置此值。 1000000
maxBytesInMemory 用于确定何时应该从中间层持久化到磁盘。通常这是在内部计算的,用户不需要设置它。此值表示在持久化之前要在堆内存中聚合的字节数。这是基于对内存使用量的粗略估计,而不是实际使用量。用于索引的最大堆内存使用量为 maxBytesInMemory *2 + maxPendingResistent 最大JVM内存的1/6
maxTotalRows 已废弃。使用 partitionsSpec 替代。等待推送的段中的总行数。用于确定何时应进行中间推送。 20000000
numShards 已废弃。使用 partitionsSpec 替代。当使用 hashed partitionsSpec时直接指定要创建的分片数。如果该值被指定了且在 granularitySpec中指定了 intervals,那么索引任务可以跳过确定间隔/分区传递数据。如果设置了 maxRowsPerSegment,则无法指定 numShards null
splitHintSpec 用于提供提示以控制每个第一阶段任务读取的数据量。根据输入源的实现,可以忽略此提示。有关更多详细信息,请参见 分割提示规范 基于大小的分割提示规范
partitionsSpec 定义在每个时间块中如何分区数据。 参见 partitionsSpec 如果 forceGuaranteedRollup = false, 则为 dynamic; 如果 forceGuaranteedRollup = true, 则为 hashed 或者 single_dim
indexSpec 定义段在索引阶段的存储格式相关选项,参见 IndexSpec null
indexSpecForIntermediatePersists 定义要在索引时用于中间持久化临时段的段存储格式选项。这可用于禁用中间段上的维度/度量压缩,以减少最终合并所需的内存。但是,在中间段上禁用压缩可能会增加页缓存的使用,而在它们被合并到发布的最终段之前使用它们,有关可能的值,请参阅 IndexSpec indexSpec 相同
maxPendingPersists 可挂起但未启动的最大持久化任务数。如果新的中间持久化将超过此限制,则在当前运行的持久化完成之前,摄取将被阻止。使用maxRowsInMemory * (2 + maxPendingResistents) 索引扩展的最大堆内存使用量。 0 (这意味着一个持久化任务只可以与摄取同时运行,而没有一个可以排队)
forceGuaranteedRollup 强制保证 最佳Rollup。最佳rollup优化了生成的段的总大小和查询时间同时索引时间将增加。如果设置为true则必须设置 granularitySpec 中的 intervals ,同时必须对 partitionsSpec 使用 single_dim 或者 hashed 。此标志不能与 IOConfigappendToExisting 一起使用。有关更多详细信息,请参见下面的 "分段推送模式" 部分。 false
reportParseExceptions 如果为true则将引发解析期间遇到的异常并停止摄取如果为false则将跳过不可解析的行和字段。 false
pushTimeout 段推送的超时毫秒时间。 该值必须设置为 >= 0, 0意味着永不超时 0
segmentWriteOutMediumFactory 创建段时使用的段写入介质。 参见 segmentWriteOutMediumFactory 未指定, 值来源于 druid.peon.defaultSegmentWriteOutMediumFactory.type
maxNumConcurrentSubTasks 可同时并行运行的最大worker数。无论当前可用的任务槽如何supervisor都将生成最多为 maxNumConcurrentSubTasks 的worker。如果此值设置为1supervisor将自行处理数据摄取而不是生成worker。如果将此值设置为太大则可能会创建太多的worker这可能会阻止其他摄取。查看 容量规划 以了解更多详细信息。 1
maxRetry 任务失败后最大重试次数 3
maxNumSegmentsToMerge 单个任务在第二阶段可同时合并的段数的最大限制。仅在 forceGuaranteedRollup 被设置的时候使用。 100
totalNumMergeTasks partitionsSpec 被设置为 hashed 或者 single_dim时, 在合并阶段用来合并段的最大任务数。 10
taskStatusCheckPeriodMs 检查运行任务状态的轮询周期(毫秒)。 1000
chatHandlerTimeout 报告worker中的推送段超时。 PT10S
chatHandlerNumRetries 重试报告worker中的推送段 5

分割提示规范

分割提示规范用于在supervisor创建输入分割时给出提示。请注意每个worker处理一个输入拆分。您可以控制每个worker在第一阶段读取的数据量。

基于大小的分割提示规范 除HTTP输入源外所有可拆分输入源都遵循基于大小的拆分提示规范。

属性 描述 默认值 是否必须
type 应当总是 maxSize none
maxSplitSize 单个任务中要处理的输入文件的最大字节数。如果单个文件大于此数字,则它将在单个任务中自行处理(文件永远不会跨任务拆分)。 500MB

段分割提示规范

段分割提示规范仅仅用在 DruidInputSource(和过时的 IngestSegmentFirehose)

属性 描述 默认值 是否必须
type 应当总是 segments none
maxInputSegmentBytesPerTask 单个任务中要处理的输入段的最大字节数。如果单个段大于此数字,则它将在单个任务中自行处理(输入段永远不会跨任务拆分)。 500MB
partitionsSpec

PartitionsSpec用于描述辅助分区方法。您应该根据需要的rollup模式使用不同的partitionsSpec。为了实现 最佳rollup,您应该使用 hashed(基于每行中维度的哈希进行分区)或 single_dim(基于单个维度的范围)。对于"尽可能rollup"模式,应使用 dynamic

三种 partitionsSpec 类型有着不同的特征。

PartitionsSpec 摄入速度 分区方式 支持的rollup模式 查询时的段修剪
dynamic 最快 基于段中的行数来进行分区 尽可能rollup N/A
hashed 中等 基于分区维度的哈希值进行分区。此分区可以通过改进数据位置性来减少数据源大小和查询延迟。有关详细信息,请参见 分区 最佳rollup N/A
single_dim 最慢 基于分区维度值的范围分区。段大小可能会根据分区键分布而倾斜。这可能通过改善数据位置性来减少数据源大小和查询延迟。有关详细信息,请参见 分区 最佳rollup Broker可以使用分区信息提前修剪段以加快查询速度。由于Broker知道每个段中 partitionDimension 值的范围,因此,给定一个包含partitionDimension 上的筛选器的查询Broker只选取包含满足 partitionDimension 上的筛选器的行的段进行查询处理。

对于每一种partitionSpec推荐的使用场景是

  • 如果数据有一个在查询中经常使用的均匀分布列,请考虑使用 single_dim partitionsSpec来最大限度地提高大多数查询的性能。
  • 如果您的数据不是均匀分布的列但在使用某些维度进行rollup时需要具有较高的rollup汇总率请考虑使用 hashed partitionsSpec。通过改善数据的局部性可以减小数据源的大小和查询延迟。
  • 如果以上两个场景不是这样或者您不需要rollup数据源请考虑使用 dynamic partitionsSpec。

Dynamic分区

属性 描述 默认值 是否必须
type 应该总是 dynamic none
maxRowsPerSegment 用来分片。决定在每一个段中有多少行 5000000
maxTotalRows 等待推送的所有段的总行数。用于确定中间段推送的发生时间。 20000000

使用Dynamic分区并行索引任务在一个阶段中运行它将生成多个worker(single_phase_sub_task 类型)每个worker都创建段。worker创建段的方式是

  • 每当当前段中的行数超过 maxRowsPerSegment 时,任务将创建一个新段。
  • 一旦所有时间块中所有段中的行总数达到 maxTotalRows,任务就会将迄今为止创建的所有段推送到深层存储并创建新段。

基于哈希的分区

属性 描述 默认值 是否必须
type 应该总是 hashed none
numShards 直接指定要创建的分片数。如果该值被指定了,同时在 granularitySpec 中指定了 intervals,那么索引任务可以跳过确定通过数据的间隔/分区 null
partitionDimensions 要分区的维度。留空可选择所有维度。 null

基于哈希分区的并行任务类似于 MapReduce。任务分为两个阶段运行,即 部分段生成部分段合并

  • 部分段生成 阶段与MapReduce中的Map阶段一样并行任务根据分割提示规范分割输入数据并将每个分割分配给一个worker。每个workerpartial_index_generate 类型)从 granularitySpec 中的segmentGranularity主分区键 读取分配的分割,然后按partitionsSpecpartitionDimensions辅助分区键的哈希值对行进行分区。分区数据存储在 MiddleManagerIndexer 的本地存储中。
  • 部分段合并 阶段类似于MapReduce中的Reduce阶段。并行任务生成一组新的workerpartial_index_merge 类型来合并在前一阶段创建的分区数据。这里分区数据根据要合并的时间块和分区维度的散列值进行洗牌每个worker从多个MiddleManager/Indexer进程中读取落在同一时间块和同一散列值中的数据并将其合并以创建最终段。最后它们将最后的段一次推送到深层存储。

基于单一维度范围分区

[!WARNING] 在并行任务的顺序模式下,当前不支持单一维度范围分区。尝试将maxNumConcurrentSubTasks 设置为大于1以使用此分区方式。

属性 描述 默认值 是否必须
type 应该总是 single_dim none
partitionDimension 要分区的维度。 仅仅允许具有单一维度值的行 none
targetRowsPerSegment 在一个分区中包含的目标行数应当是一个500MB ~ 1GB目标段的数值。 none 要么该值被设置,或者 maxRowsPerSegment被设置。
maxRowsPerSegment 分区中要包含的行数的软最大值。 none 要么该值被设置,或者 targetRowsPerSegment被设置。
assumeGrouped 假设输入数据已经按时间和维度分组。摄取将运行得更快,但如果违反此假设,则可能会选择次优分区 false

single-dim 分区下并行任务分为3个阶段进行部分维分布部分段生成部分段合并。第一个阶段是收集一些统计数据以找到最佳分区,另外两个阶段是创建部分段并分别合并它们,就像在基于哈希的分区中那样。

  • 部分维度分布 阶段并行任务分割输入数据并根据分割提示规范将其分配给worker。每个worker任务partial_dimension_distribution 类型)读取分配的分割并为 partitionDimension 构建直方图。并行任务从worker任务收集这些直方图并根据 partitionDimension 找到最佳范围分区,以便在分区之间均匀分布行。请注意,targetRowsPerSegmentmaxRowsPerSegment 将用于查找最佳分区。
  • 部分段生成 阶段并行任务生成新的worker任务partial_range_index_generate 类型以创建分区数据。每个worker任务都读取在前一阶段中创建的分割根据 granularitySpec 中的segmentGranularity主分区键的时间块对行进行分区,然后根据在前一阶段中找到的范围分区对行进行分区。分区数据存储在 MiddleManagerIndexer的本地存储中。
  • 部分段合并 阶段并行索引任务生成一组新的worker任务partial_index_generic_merge类型)来合并在上一阶段创建的分区数据。这里,分区数据根据时间块和 partitionDimension 的值进行洗牌每个工作任务从多个MiddleManager/Indexer进程中读取属于同一范围的同一分区中的段并将它们合并以创建最后的段。最后它们将最后的段推到深层存储。

[!WARNING] 由于单一维度范围分区的任务在 部分维度分布部分段生成 阶段对输入进行两次传递,因此如果输入在两次传递之间发生变化,任务可能会失败

HTTP状态接口

supervisor任务提供了一些HTTP接口来获取任务状态。

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/mode

如果索引任务以并行的方式运行,则返回 "parallel", 否则返回 "sequential"

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/phase

如果任务以并行的方式运行,则返回当前阶段的名称

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/progress

如果supervisor任务以并行的方式运行则返回当前阶段的预估进度

一个示例结果如下:

{
  "running":10,
  "succeeded":0,
  "failed":0,
  "complete":0,
  "total":10,
  "estimatedExpectedSucceeded":10
}
  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtasks/running

返回正在运行的worker任务的任务IDs如果该supervisor任务以序列模式运行则返回一个空的列表

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs

返回所有的worker任务规范如果该supervisor任务以序列模式运行则返回一个空的列表

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs/running

返回正在运行的worker任务规范如果该supervisor任务以序列模式运行则返回一个空的列表

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspecs/complete

返回已经完成的worker任务规范如果该supervisor任务以序列模式运行则返回一个空的列表

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}

返回指定ID的worker任务规范如果该supervisor任务以序列模式运行则返回一个HTTP 404

  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}/state

返回指定ID的worker任务规范的状态如果该supervisor任务以序列模式运行则返回一个HTTP 404。 返回的结果集中包括worker任务规范当前任务状态(如果存在的话) 以及任务尝试历史记录。

一个示例结果如下:

{
  "spec": {
    "id": "index_parallel_lineitem_2018-04-20T22:12:43.610Z_2",
    "groupId": "index_parallel_lineitem_2018-04-20T22:12:43.610Z",
    "supervisorTaskId": "index_parallel_lineitem_2018-04-20T22:12:43.610Z",
    "context": null,
    "inputSplit": {
      "split": "/path/to/data/lineitem.tbl.5"
    },
    "ingestionSpec": {
      "dataSchema": {
        "dataSource": "lineitem",
        "timestampSpec": {
          "column": "l_shipdate",
          "format": "yyyy-MM-dd"
        },
        "dimensionsSpec": {
          "dimensions": [
            "l_orderkey",
            "l_partkey",
            "l_suppkey",
            "l_linenumber",
            "l_returnflag",
            "l_linestatus",
            "l_shipdate",
            "l_commitdate",
            "l_receiptdate",
            "l_shipinstruct",
            "l_shipmode",
            "l_comment"
          ]
        },
        "metricsSpec": [
          {
            "type": "count",
            "name": "count"
          },
          {
            "type": "longSum",
            "name": "l_quantity",
            "fieldName": "l_quantity",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_extendedprice",
            "fieldName": "l_extendedprice",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_discount",
            "fieldName": "l_discount",
            "expression": null
          },
          {
            "type": "doubleSum",
            "name": "l_tax",
            "fieldName": "l_tax",
            "expression": null
          }
        ],
        "granularitySpec": {
          "type": "uniform",
          "segmentGranularity": "YEAR",
          "queryGranularity": {
            "type": "none"
          },
          "rollup": true,
          "intervals": [
            "1980-01-01T00:00:00.000Z/2020-01-01T00:00:00.000Z"
          ]
        },
        "transformSpec": {
          "filter": null,
          "transforms": []
        }
      },
      "ioConfig": {
        "type": "index_parallel",
        "inputSource": {
          "type": "local",
          "baseDir": "/path/to/data/",
          "filter": "lineitem.tbl.5"
        },
        "inputFormat": {
          "format": "tsv",
          "delimiter": "|",
          "columns": [
            "l_orderkey",
            "l_partkey",
            "l_suppkey",
            "l_linenumber",
            "l_quantity",
            "l_extendedprice",
            "l_discount",
            "l_tax",
            "l_returnflag",
            "l_linestatus",
            "l_shipdate",
            "l_commitdate",
            "l_receiptdate",
            "l_shipinstruct",
            "l_shipmode",
            "l_comment"
          ]
        },
        "appendToExisting": false
      },
      "tuningConfig": {
        "type": "index_parallel",
        "maxRowsPerSegment": 5000000,
        "maxRowsInMemory": 1000000,
        "maxTotalRows": 20000000,
        "numShards": null,
        "indexSpec": {
          "bitmap": {
            "type": "roaring"
          },
          "dimensionCompression": "lz4",
          "metricCompression": "lz4",
          "longEncoding": "longs"
        },
        "indexSpecForIntermediatePersists": {
          "bitmap": {
            "type": "roaring"
          },
          "dimensionCompression": "lz4",
          "metricCompression": "lz4",
          "longEncoding": "longs"
        },
        "maxPendingPersists": 0,
        "reportParseExceptions": false,
        "pushTimeout": 0,
        "segmentWriteOutMediumFactory": null,
        "maxNumConcurrentSubTasks": 4,
        "maxRetry": 3,
        "taskStatusCheckPeriodMs": 1000,
        "chatHandlerTimeout": "PT10S",
        "chatHandlerNumRetries": 5,
        "logParseExceptions": false,
        "maxParseExceptions": 2147483647,
        "maxSavedParseExceptions": 0,
        "forceGuaranteedRollup": false,
        "buildV9Directly": true
      }
    }
  },
  "currentStatus": {
    "id": "index_sub_lineitem_2018-04-20T22:16:29.922Z",
    "type": "index_sub",
    "createdTime": "2018-04-20T22:16:29.925Z",
    "queueInsertionTime": "2018-04-20T22:16:29.929Z",
    "statusCode": "RUNNING",
    "duration": -1,
    "location": {
      "host": null,
      "port": -1,
      "tlsPort": -1
    },
    "dataSource": "lineitem",
    "errorMsg": null
  },
  "taskHistory": []
}
  • http://{PEON_IP}:{PEON_PORT}/druid/worker/v1/chat/{SUPERVISOR_TASK_ID}/subtaskspec/{SUB_TASK_SPEC_ID}/history

返回被指定ID的worker任务规范的任务尝试历史记录如果该supervisor任务以序列模式运行则返回一个HTTP 404

容量规划

不管当前有多少任务槽可用supervisor任务最多可以创建 maxNumConcurrentSubTasks worker任务, 因此,可以同时运行的任务总数为 (maxNumConcurrentSubTasks+1)(包括supervisor任务)。请注意这甚至可以大于任务槽的总数所有worker的容量之和。如果maxNumConcurrentSubTasks 大于 n可用任务槽,则maxNumConcurrentSubTasks 任务由supervisor任务创建但只有 n 个任务将启动, 其他人将在挂起状态下等待,直到任何正在运行的任务完成。

如果将并行索引任务与流摄取一起使用,我们建议限制批摄取的最大容量,以防止流摄取被批摄取阻止。假设您同时有 t 个并行索引任务要运行, 但是想将批摄取的最大任务数限制在 b。 那么, 所有并行索引任务的 maxNumConcurrentSubTasks 之和 + t(supervisor任务数) 必须小于 b

如果某些任务的优先级高于其他任务,则可以将其maxNumConcurrentSubTasks 设置为高于低优先级任务的值。这可能有助于高优先级任务比低优先级任务提前完成,方法是为它们分配更多的任务槽。

简单任务

简单任务(index类型)设计用于较小的数据集。任务在索引服务中执行。

任务符号

一个示例任务如下:

{
  "type" : "index",
  "spec" : {
    "dataSchema" : {
      "dataSource" : "wikipedia",
      "timestampSpec" : {
        "column" : "timestamp",
        "format" : "auto"
      },
      "dimensionsSpec" : {
        "dimensions": ["page","language","user","unpatrolled","newPage","robot","anonymous","namespace","continent","country","region","city"],
        "dimensionExclusions" : []
      },
      "metricsSpec" : [
        {
          "type" : "count",
          "name" : "count"
        },
        {
          "type" : "doubleSum",
          "name" : "added",
          "fieldName" : "added"
        },
        {
          "type" : "doubleSum",
          "name" : "deleted",
          "fieldName" : "deleted"
        },
        {
          "type" : "doubleSum",
          "name" : "delta",
          "fieldName" : "delta"
        }
      ],
      "granularitySpec" : {
        "type" : "uniform",
        "segmentGranularity" : "DAY",
        "queryGranularity" : "NONE",
        "intervals" : [ "2013-08-31/2013-09-01" ]
      }
    },
    "ioConfig" : {
      "type" : "index",
      "inputSource" : {
        "type" : "local",
        "baseDir" : "examples/indexing/",
        "filter" : "wikipedia_data.json"
       },
       "inputFormat": {
         "type": "json"
       }
    },
    "tuningConfig" : {
      "type" : "index",
      "maxRowsPerSegment" : 5000000,
      "maxRowsInMemory" : 1000000
    }
  }
}
属性 描述 是否必须
type 任务类型, 应该总是 index
id 任务ID。如果该值为显式的指定Druid将会使用任务类型、数据源名称、时间间隔以及日期时间戳生成一个任务ID
spec 摄入规范包括dataSchema、IOConfig 和 TuningConfig。 详情见下边的描述
context 包含多个任务配置参数的上下文。 详情见下边的描述
dataSchema

该字段为必须字段。

详情可以见摄取文档中的 dataSchema 部分。

如果没有在 dataSchemagranularitySpec 中显式指定 intervals,本地索引任务将对数据执行额外的传递,以确定启动时要锁定的范围。如果显式指定 intervals,则指定间隔之外的任何行都将被丢弃。如果您知道数据的时间范围,我们建议显式设置 intervals,因为它允许任务跳过额外的过程,并且如果有一些带有意外时间戳的杂散数据,您不会意外地替换该范围之外的数据。

ioConfig
属性 描述 默认值 是否必须
type 任务类型,应该总是 index none
inputFormat inputFormat 指定如何解析输入数据 none
appendToExisting 创建段作为最新版本的附加分片,有效地附加到段集而不是替换它。仅当现有段集具有可扩展类型 shardSpec时,此操作才有效。 false
tuningConfig

tuningConfig是一个可选项如果未指定则使用默认的参数。 详情如下:

属性 描述 默认 是否必须
type 任务类型,应当总是 index none
maxRowsPerSegment 已废弃。使用 partitionsSpec 替代,被用来分片。 决定在每个段中有多少行。 5000000
maxRowsInMemory 用于确定何时应该从中间层持久化到磁盘。通常用户不需要设置此值,但根据数据的性质,如果行的字节数较短,则用户可能不希望在内存中存储一百万行,应设置此值。 1000000
maxBytesInMemory 用于确定何时应该从中间层持久化到磁盘。通常这是在内部计算的,用户不需要设置它。此值表示在持久化之前要在堆内存中聚合的字节数。这是基于对内存使用量的粗略估计,而不是实际使用量。用于索引的最大堆内存使用量为 maxBytesInMemory *2 + maxPendingResistent 最大JVM内存的1/6
maxTotalRows 已废弃。使用 partitionsSpec 替代。等待推送的段中的总行数。用于确定何时应进行中间推送。 20000000
numShards 已废弃。使用 partitionsSpec 替代。当使用 hashed partitionsSpec时直接指定要创建的分片数。如果该值被指定了且在 granularitySpec中指定了 intervals,那么索引任务可以跳过确定间隔/分区传递数据。如果设置了 maxRowsPerSegment,则无法指定 numShards null
partitionsSpec 定义在每个时间块中如何分区数据。 参见 partitionsSpec 如果 forceGuaranteedRollup = false, 则为 dynamic; 如果 forceGuaranteedRollup = true, 则为 hashed 或者 single_dim
indexSpec 定义段在索引阶段的存储格式相关选项,参见 IndexSpec null
indexSpecForIntermediatePersists 定义要在索引时用于中间持久化临时段的段存储格式选项。这可用于禁用中间段上的维度/度量压缩,以减少最终合并所需的内存。但是,在中间段上禁用压缩可能会增加页缓存的使用,而在它们被合并到发布的最终段之前使用它们,有关可能的值,请参阅 IndexSpec indexSpec 相同
maxPendingPersists 可挂起但未启动的最大持久化任务数。如果新的中间持久化将超过此限制,则在当前运行的持久化完成之前,摄取将被阻止。使用maxRowsInMemory * (2 + maxPendingResistents) 索引扩展的最大堆内存使用量。 0 (这意味着一个持久化任务只可以与摄取同时运行,而没有一个可以排队)
forceGuaranteedRollup 强制保证 最佳Rollup。最佳rollup优化了生成的段的总大小和查询时间同时索引时间将增加。如果设置为true则必须设置 granularitySpec 中的 intervals ,同时必须对 partitionsSpec 使用 single_dim 或者 hashed 。此标志不能与 IOConfigappendToExisting 一起使用。有关更多详细信息,请参见下面的 "分段推送模式" 部分。 false
reportParseExceptions 已废弃。如果为true则将引发解析期间遇到的异常并停止摄取如果为false则将跳过不可解析的行和字段。将 reportParseExceptions 设置为true将覆盖maxParseExceptionsmaxSavedParseExceptions 的现有配置,将 maxParseExceptions 设置为0并将 maxSavedParseExceptions 限制为不超过1。 false
pushTimeout 段推送的超时毫秒时间。 该值必须设置为 >= 0, 0意味着永不超时 0
segmentWriteOutMediumFactory 创建段时使用的段写入介质。 参见 segmentWriteOutMediumFactory 未指定, 值来源于 druid.peon.defaultSegmentWriteOutMediumFactory.type
logParseExceptions 如果为true则在发生解析异常时记录错误消息其中包含有关发生错误的行的信息。 false
maxParseExceptions 任务停止接收并失败之前可能发生的最大分析异常数。如果设置了reportParseExceptions,则该配置被覆盖。 unlimited
maxSavedParseExceptions 当出现解析异常时Druid可以跟踪最新的解析异常。"maxSavedParseExceptions" 限制将保存多少个异常实例。这些保存的异常将在任务完成报告中的任务完成后可用。如果设置了 reportParseExceptions ,则该配置被覆盖。 0
partitionsSpec

PartitionsSpec用于描述辅助分区方法。您应该根据需要的rollup模式使用不同的partitionsSpec。为了实现 最佳rollup,您应该使用 hashed(基于每行中维度的哈希进行分区)

属性 描述 默认值 是否必须
type 应该总是 hashed none
maxRowsPerSegment 用在分片中,决定在每个段中有多少行 5000000
numShards 直接指定要创建的分片数。如果该值被指定了,同时在 granularitySpec 中指定了 intervals,那么索引任务可以跳过确定通过数据的间隔/分区 null
partitionDimensions 要分区的维度。留空可选择所有维度。 null

对于尽可能rollup模式您应该使用 dynamic

属性 描述 默认值 是否必须
type 应该总是 dynamic none
maxRowsPerSegment 用来分片。决定在每一个段中有多少行 5000000
maxTotalRows 等待推送的所有段的总行数。用于确定中间段推送的发生时间。 20000000
segmentWriteOutMediumFactory
字段 类型 描述 是否必须
type String 配置解释和可选项可以参见 额外的Peon配置SegmentWriteOutMediumFactory

分段推送模式

当使用简单任务摄取数据时,它从输入数据创建段并推送它们。对于分段推送,索引任务支持两种分段推送模式,分别是批量推送模式增量推送模式,以实现 最佳rollup和尽可能rollup

在批量推送模式下,在索引任务的最末端推送每个段。在此之前,创建的段存储在运行索引任务的进程的内存和本地存储中。因此,此模式可能由于存储容量有限而导致问题,建议不要在生产中使用。

相反,在增量推送模式下,分段是增量推送的,即可以在索引任务的中间推送。更准确地说,索引任务收集数据并将创建的段存储在运行该任务的进程的内存和磁盘中,直到收集的行总数超过 maxTotalRows。一旦超过,索引任务将立即推送创建的所有段,直到此时为止,清除所有推送的段,并继续接收剩余的数据。

要启用批量推送模式,应在 TuningConfig 中设置forceGuaranteedRollup。请注意,此选项不能与 IOConfigappendToExisting一起使用。

输入源

输入源是定义索引任务读取数据的位置。只有本地并行任务和简单任务支持输入源。

S3输入源

[!WARNING] 您需要添加 druid-s3-extensions 扩展以便使用S3输入源。

S3输入源支持直接从S3读取对象。可以通过S3 URI字符串列表或S3位置前缀列表指定对象该列表将尝试列出内容并摄取位置中包含的所有对象。S3输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务将读取一个或多个对象。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "uris": ["s3://foo/bar/file.json", "s3://bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "prefixes": ["s3://foo/bar", "s3://bar/foo"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "s3",
        "objects": [
          { "bucket": "foo", "path": "bar/file1.json"},
          { "bucket": "bar", "path": "foo/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
属性 描述 默认 是否必须
type 应该是 s3 None
uris 指定被摄取的S3对象位置的URI JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。
prefixes 指定被摄取的S3对象所在的路径前缀的URI JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。
objects 指定被摄取的S3对象的JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。
properties 指定用来覆盖默认S3配置的对象属性详情见下边 None 否(未指定则使用默认)

注意:只有当 prefixes 被指定时S3输入源将略过空的对象。

S3对象

属性 描述 默认 是否必须
bucket S3 Bucket的名称 None
path 数据路径 None

属性对象:

属性 描述 默认 是否必须
accessKeyId S3输入源访问密钥的 Password Provider 或纯文本字符串 None 如果 secretAccessKey 被提供的话,则为必须
secretAccessKey S3输入源访问密钥的 Password Provider 或纯文本字符串 None 如果 accessKeyId 被提供的话,则为必须

注意 如果 accessKeyIdsecretAccessKey 未被指定的话, 则将使用默认的 S3认证

谷歌云存储输入源

[!WARNING] 您需要添加 druid-google-extensions 扩展以便使用谷歌云存储输入源。

谷歌云存储输入源支持直接从谷歌云存储读取对象可以通过谷歌云存储URI字符串列表指定对象。谷歌云存储输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务将读取一个或多个对象。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "uris": ["gs://foo/bar/file.json", "gs://bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "prefixes": ["gs://foo/bar", "gs://bar/foo"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "google",
        "objects": [
          { "bucket": "foo", "path": "bar/file1.json"},
          { "bucket": "bar", "path": "foo/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
属性 描述 默认 是否必须
type 应该是 google None
uris 指定被摄取的谷歌云存储对象位置的URI JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。
prefixes 指定被摄取的谷歌云存储对象所在的路径前缀的URI JSON数组。 以被给定的前缀开头的空对象将被略过 None uris 或者 prefixes 或者 objects 必须被设置。
objects 指定被摄取的谷歌云存储对象的JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。

注意:只有当 prefixes 被指定时,谷歌云存储输入源将略过空的对象。

谷歌云存储对象:

属性 描述 默认 是否必须
bucket 谷歌云存储 Bucket的名称 None
path 数据路径 None

Azure输入源

[!WARNING] 您需要添加 druid-azure-extensions 扩展以便使用Azure输入源。

Azure输入源支持直接从Azure读取对象可以通过Azure URI字符串列表指定对象。Azure输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务将读取一个或多个对象。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "uris": ["azure://container/prefix1/file.json", "azure://container/prefix2/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "prefixes": ["azure://container/prefix1", "azure://container/prefix2"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "azure",
        "objects": [
          { "bucket": "container", "path": "prefix1/file1.json"},
          { "bucket": "container", "path": "prefix2/file2.json"}
        ]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
属性 描述 默认 是否必须
type 应该是 azure None
uris 指定被摄取的azure对象位置的URI JSON数组, 格式必须为 azure://<container>/<path-to-file> None uris 或者 prefixes 或者 objects 必须被设置。
prefixes 指定被摄取的azure对象所在的路径前缀的URI JSON数组, 格式必须为 azure://<container>/<prefix>, 以被给定的前缀开头的空对象将被略过 None uris 或者 prefixes 或者 objects 必须被设置。
objects 指定被摄取的azure对象的JSON数组 None uris 或者 prefixes 或者 objects 必须被设置。

注意:只有当 prefixes 被指定时azure输入源将略过空的对象。

azure对象

属性 描述 默认 是否必须
bucket azure Bucket的名称 None
path 数据路径 None

HDFS输入源

[!WARNING] 您需要添加 druid-hdfs-extensions 扩展以便使用HDFS输入源。

HDFS输入源支持直接从HDFS存储中读取文件文件路径可以指定为HDFS URI字符串或者HDFS URI字符串列表。HDFS输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务将读取一个或多个文件。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": "hdfs://foo/bar/", "hdfs://bar/foo"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": ["hdfs://foo/bar", "hdfs://bar/foo"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": "hdfs://foo/bar/file.json", "hdfs://bar/foo/file2.json"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "hdfs",
        "paths": ["hdfs://foo/bar/file.json", "hdfs://bar/foo/file2.json"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
属性 描述 默认 是否必须
type 应该总是 hdfs None
paths HDFS路径。可以是JSON数组或逗号分隔的路径字符串这些路径支持类似*的通配符。给定路径之下的空文件将会被跳过。 None

您还可以使用HDFS输入源从云存储摄取数据。但是如果您想从AWS S3或谷歌云存储读取数据可以考虑使用 S3输入源谷歌云存储输入源

HTTP输入源

HTTP输入源支持直接通过HTTP从远程站点直接读取文件。 HTTP输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务只能读取一个文件。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"]
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...

使用DefaultPassword Provider的身份验证字段示例这要求密码位于摄取规范中

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
        "httpAuthenticationUsername": "username",
        "httpAuthenticationPassword": "password123"
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...

您还可以使用其他现有的Druid PasswordProvider。下面是使用EnvironmentVariablePasswordProvider的示例

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "http",
        "uris": ["http://example.com/uri1", "http://example2.com/uri2"],
        "httpAuthenticationUsername": "username",
        "httpAuthenticationPassword": {
          "type": "environment",
          "variable": "HTTP_INPUT_SOURCE_PW"
        }
      },
      "inputFormat": {
        "type": "json"
      },
      ...
    },
...
}
属性 描述 默认 是否必须
type 应该是 http None
uris 输入文件的uris None
httpAuthenticationUsername 用于指定uri的身份验证的用户名。如果规范中指定的uri需要基本身份验证头则改属性是可选的。 None
httpAuthenticationPassword 用于指定uri的身份验证的密码。如果规范中指定的uri需要基本身份验证头则改属性是可选的。 None

Inline输入源

Inline输入源可用于读取其规范内联的数据。它可用于演示或用于快速测试数据解析和schema。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "inline",
        "data": "0,values,formatted\n1,as,CSV"
      },
      "inputFormat": {
        "type": "csv"
      },
      ...
    },
...
属性 描述 是否必须
type 应该是 inline
data 要摄入的内联数据

Local输入源

Local输入源支持直接从本地存储中读取文件主要目的用于PoC测试。 Local输入源是可拆分的可以由 并行任务 使用,其中 index_parallel 的每个worker任务读取一个或者多个文件。

样例规范:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "local",
        "filter" : "*.csv",
        "baseDir": "/data/directory",
        "files": ["/bar/foo", "/foo/bar"]
      },
      "inputFormat": {
        "type": "csv"
      },
      ...
    },
...
属性 描述 是否必须
type 应该是 local
filter 文件的通配符筛选器, 详细信息 点击此处 查看 如果 baseDir 指定了,则为必须
baseDir 递归搜索要接收的文件的目录, 将跳过 baseDir 下的空文件。 baseDir 或者 files 至少需要被指定一个
files 要摄取的文件路径。如果某些文件位于指定的 baseDir 下,则可以忽略它们以避免摄取重复文件。该选项会跳过空文件。 baseDir 或者 files 至少需要被指定一个

Druid输入源

Druid输入源支持直接从现有的Druid段读取数据可能使用新的模式并更改段的名称、维度、Metrics、Rollup等。Druid输入源是可拆分的可以由 并行任务 使用。这个输入源有一个固定的从Druid段读取的输入格式当使用这个输入源时不需要在摄取规范中指定输入格式字段。

属性 描述 是否必须
type 应该是 druid
dataSource 定义要从中获取行的Druid数据源
interval ISO-8601时间间隔的字符串它定义了获取数据的时间范围。
dimensions 包含要从Druid数据源中选择的维度列名称的字符串列表。如果列表为空则不返回维度。如果为空则返回所有维度。
metrics 包含要选择的Metric列名称的字符串列表。如果列表为空则不返回任何度量。如果为空则返回所有Metric。
filter 详情请查看 filters 如果指定,则只返回与筛选器匹配的行。

DruidInputSource规范的最小示例如下所示

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "druid",
        "dataSource": "wikipedia",
        "interval": "2013-01-01/2013-01-02"
      }
      ...
    },
...

上面的规范将从 wikipedia 数据源中读取所有现有dimension和metric列包括 2013-01-01/2013-01-02 时间间隔内带有时间戳( __time 列)的所有行。

以下规范使用了筛选器并读取原始数据源列子集:

...
    "ioConfig": {
      "type": "index_parallel",
      "inputSource": {
        "type": "druid",
        "dataSource": "wikipedia",
        "interval": "2013-01-01/2013-01-02",
        "dimensions": [
          "page",
          "user"
        ],
        "metrics": [
          "added"
        ],
        "filter": {
          "type": "selector",
          "dimension": "page",
          "value": "Druid"
        }
      }
      ...
    },
...

上面的规范只返回 pageuser 维度和 added 的Metric。只返回page = Druid 的行。

Firehoses(已废弃)

StaticS3Firehose

HDFSFirehose

LocalFirehose

HttpFirehose

IngestSegmentFirehose

SqlFirehose

InlineFirehose

CombiningFirehose