FILTER_INTO_JOIN is mainly run along with the other rules with the Volcano planner; however if the query starts highly underdefined (join conditions in the where clauses) that generic query could give a lot of room for the other rules to play around with only enabled it for when the join uses subqueries for its inputs.
PROJECT_FILTER rule is not that useful. and could increase planning times by providing new plans. This problem worsened after we started supporting inner joins with arbitrary join conditions in https://github.com/apache/druid/pull/15302
- Rename ExprType to BaseType in CollectComparisons, since ExprType is a thing
that exists elsewhere.
- Remove unused "notInRexNodes" from SearchOperatorConversion.
* New handling for COALESCE, SEARCH, and filter optimization.
COALESCE is converted by Calcite's parser to CASE, which is largely
counterproductive for us, because it ends up duplicating expressions.
In the current code we end up un-doing it in our CaseOperatorConversion.
This patch has a different approach:
1) Add CaseToCoalesceRule to convert CASE back to COALESCE earlier, before
the Volcano planner runs, using CaseToCoalesceRule.
2) Add FilterDecomposeCoalesceRule to decompose calls like
"f(COALESCE(x, y))" into "(x IS NOT NULL AND f(x)) OR (x IS NULL AND f(y))".
This helps use indexes when available on x and y.
3) Add CoalesceLookupRule to push COALESCE into the third arg of LOOKUP.
4) Add a native "coalesce" function so we can convert 3+ arg COALESCE.
The advantage of this approach is that by un-doing the CASE to COALESCE
conversion earlier, we have flexibility to do more stuff with
COALESCE (like decomposition and pushing into LOOKUP).
SEARCH is an operator used internally by Calcite to represent matching
an argument against some set of ranges. This patch improves our handling
of SEARCH in two ways:
1) Expand NOT points (point "holes" in the range set) from SEARCH as
`!(a || b)` rather than `!a && !b`, which makes it possible to convert
them to a "not" of "in" filter later.
2) Generate those nice conversions for NOT points even if the SEARCH
is not composed of 100% NOT points. Without this change, a SEARCH
for "x NOT IN ('a', 'b') AND x < 'm'" would get converted like
"x < 'a' OR (x > 'a' AND x < 'b') OR (x > 'b' AND x < 'm')".
One of the steps we take when generating Druid queries from Calcite
plans is to optimize native filters. This patch improves this step:
1) Extract common ANDed predicates in ConvertSelectorsToIns, so we can
convert "(a && x = 'b') || (a && x = 'c')" into "a && x IN ('b', 'c')".
2) Speed up CombineAndSimplifyBounds and ConvertSelectorsToIns on
ORs with lots of children by adjusting the logic to avoid calling
"indexOf" and "remove" on an ArrayList.
3) Refactor ConvertSelectorsToIns to reduce duplicated code between the
handling for "selector" and "equals" filters.
* Not so final.
* Fixes.
* Fix test.
* Fix test.
Fixes#15072
Before this modification , the third parameter (timezone) require to be a Literal, it will throw a error when this parameter is column Identifier.
Updates ARRAY_OVERLAP to use the same ArrayContainsElement filter added in #15366 when filtering ARRAY typed columns so that it can also use indexes like ARRAY_CONTAINS.
This PR revives #14978 with a few more bells and whistles. Instead of an unconditional cross-join, we will now split the join condition such that some conditions are now evaluated post-join. To decide what sub-condition goes where, I have refactored DruidJoinRule class to extract unsupported sub-conditions. We build a postJoinFilter out of these unsupported sub-conditions and push to the join.
I think this is a problem as it discards the false return value when the putToKeyBuffer can't store the value because of the limit
Not forwarding the return value at that point may lead to the normal continuation here regardless something was not added to the dictionary like here
This PR fixes an issue where the grouping aggregator wrongly assumes that a key dimension is a virtual column and assigns a wrong name to it. This results in a mismatch between the dimensions that grouping aggregator sees and the dimension names that rows are aggregated on. And finally, grouping aggregator generates wrong result.
In pull request #14985, a bug was introduced where periodic refresh would skip rebuilding a datasource's schema after encountering a non-existent datasource. This resulted in remaining datasources having stale schema information.
This change addresses the bug and adds a unit test to validate the refresh mechanism's behaviour when a datasource is removed, and other datasources have schema changes.
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
* Add system fields to input sources.
Main changes:
1) The SystemField enum defines system fields "__file_uri", "__file_path",
and "__file_bucket". They are associated with each input entity.
2) The SystemFieldInputSource interface can be added to any InputSource
to make it system-field-capable. It sets up serialization of a list
of configured "systemFields" in the JSON form of the input source, and
provides a method getSystemFieldValue for computing the value of each
system field. Cloud object, HDFS, HTTP, and Local now have this.
* Fix various LocalInputSource calls.
* Fix style stuff.
* Fixups.
* Fix tests and coverage.
* better documentation for the differences between arrays and mvds
* add outputType to ExpressionPostAggregator to make docs true
* add output coercion if outputType is defined on ExpressionPostAgg
* updated post-aggregations.md to be consistent with aggregations.md and filters.md and use tables
* Use min of scheduler threads and server threads for subquery guardrails.
This allows more memory to be used for subqueries when the query scheduler
is configured to limit queries below the number of server threads. The patch
also refactors the code so SubqueryGuardrailHelper is provided by a Guice
Provider rather than being created by ClientQuerySegmentWalker, to achieve
better separation of concerns.
* Exclude provider from coverage.
Functions that accept literals also allow casted literals. This shouldn't have an impact on the queries that the user writes. It enables the SQL functions to accept explicit cast, which is required with JDBC.
- adds a new query build path: DruidQuery#toScanAndSortQuery which:
- builds a ScanQuery without considering the current ordering
- builds an operator to execute the sort
- fixes a null string to "null" literal string conversion in the frame serializer code
- fixes some DrillWindowQueryTest cases
- fix NPE in NaiveSortOperator in case there was no input
- enables back CoreRules.AGGREGATE_REMOVE
- adds a processing level OffsetLimit class and uses that instead of just the limit in the rac parts
- earlier window expressions on top of a subquery with an offset may have ignored the offset
for some exotic queries like:
SELECT
'_'||dim1,
MIN(cast(0 as double)) OVER (),
MIN(cast((cnt||cnt) as bigint)) OVER ()
FROM foo
the compilation have resulted in NPE -s mostly because VirtualColumn -s were not handled properly
This PR:
adds a flag to JsonToParquet to do the fix during conversion
updates the json files to more correct conents
some resultset mismatches were fixed by this
updates parquet to 1.13.1
* add native filters for "(filter) is true" and "(filter) is false"
changes:
* add IsTrueDimFilter, IsFalseDimFilter, and abstract IsBooleanDimFilter for native json filter implementations of `(filter) IS TRUE` and `(filter) IS FALSE`
* add IsBooleanFilter for actual filtering logic for these filters, which ignore includeUnknown to always use matches with false for true and !matches with true for false
* fix test incorrectly adjusted to wrong answer in #15058
* add tests for default value mode
* sql compatible tri-state native logical filters when druid.expressions.useStrictBooleans=true and druid.generic.useDefaultValueForNull=false, and new druid.generic.useThreeValueLogicForNativeFilters=true
* log.warn if non-default configurations are used to guide operators towards SQL complaint behavior
* fixes
* check for latest rewrite place
* Revert "check for latest rewrite place"
This reverts commit 5cf1e2c1ca.
* some stuff
(cherry picked from commit ab346d4373ea888eb8ef6115e018e7fb0d27407f)
* update test output
* updates to test ouptuts
* some stuff
* move validator
* cleanup
* fix
* change test slightly
* add apidoc cleanup warnings
* cleanup/etc
* instead of telling the story; add a fail with some reason whats the issue
* lead-lag fix
* add test
* remove unnecessary throw
* druidexception-trial
* Revert "druidexception-trial"
This reverts commit 8fa06644bc.
* undo changes to no_grouping; add no_grouping2
* add missing assert on resultcount
* rename method; update
* introduce enum/etc
* make resultmatchmode accessible from TestBuilder#expectedResults
* fix dump results to use log
* fix
* handle null correctly
* disable feature type based things for MSQ
* fix varianssqlaggtest
* use eps in other test
* fix intellij error
* add final
* addrss review
* update test/string/etc
* write concat in 3 lines :D
EARLIEST and LATEST operators implicitly reference the __time column for calculation of the aggregate value. Since the reference isn't explicit, Calcite sometimes fails to update the __time column name when there's column renaming --such as in the case of nested queries -- resulting in column not found errors.
This change rewrites these operators to EARLIEST_BY and LATEST_BY during query processing to make the reference explicit to Calcite.
- introduces a test_X method for every testcase (995 testcases)
- added a resultset parser which reads the expected resultset based on the result schema
- loaded a few more datasets
- added a testcase to ensure that all files have a corresponding testcase
- renamed DecoupledIgnore to NegativeTest
- categorized the failing 268 tests
* add a bunch of tests with array typed columns to CalciteArraysQueryTest
* fix a bug with unnest filter pushdown when filtering on unnested array columns
Instead of passing the constants around in a new parameter; InputAccessor was introduced to take care of transparently handling the constants - this new class started picking up some copy-paste debris around field accesses; and made them a little bit more readble.
The sql standard is not very restrictive regarding this:
If AVG is specified and DT is exact numeric, then the declared type of the result is an implemen-
tation-defined exact numeric type with precision not less than the precision of DT and scale not
less than the scale of DT.
so; using the same type is also ok (without patch);
however the avg of 0 and 1 is 0 right now because of the retention of the integer typ
Postgres,MySql and Oracle and Drill seem to increase precision ; mssql returns 0
http://sqlfiddle.com/#!9/6f7248/1
I think we should also increase precision as its already calculated more precisely
* Updating plans when using joins with unnest on the left
* Correcting segment map function for hashJoin
* The changes done here are not reflected into MSQ yet so these tests might not run in MSQ
* native tests
* Self joins with unnest data source
* Making this pass
* Addressing comments by adding explanation and new test
Row-based frames, and by extension, MSQ now supports numeric array types. This means that all queries consuming or producing arrays would also work with MSQ. Numeric arrays can also be ingested via MSQ. Post this patch, queries like, SELECT [1, 2] would work with MSQ since they consume a numeric array, instead of failing with an unsupported column type exception.
This change updates dependencies as needed and fixes tests to remove code incompatible with Java 21
As a result all unit tests now pass with Java 21.
* update maven-shade-plugin to 3.5.0 and follow-up to #15042
* explain why we need to override configuration when specifying outputFile
* remove configuration from dependency management in favor of explicit overrides in each module.
* update to mockito to 5.5.0 for Java 21 support when running with Java 11+
* continue using latest mockito 4.x (4.11.0) when running with Java 8
* remove need to mock private fields
* exclude incorrectly declared mockito dependency from pac4j-oidc
* remove mocking of ByteBuffer, since sealed classes can no longer be mocked in Java 21
* add JVM options workaround for system-rules junit plugin not supporting Java 18+
* exclude older versions of byte-buddy from assertj-core
* fix for Java 19 changes in floating point string representation
* fix missing InitializedNullHandlingTest
* update easymock to 5.2.0 for Java 21 compatibility
* update animal-sniffer-plugin to 1.23
* update nl.jqno.equalsverifier to 3.15.1
* update exec-maven-plugin to 3.1.0
Most of the testcases were disabled in CalciteWindowQueryTest during the Calcite-1.35 upgrade; there were some changes arising from the fact that the removal of DRUID_SUM had some unexpected sideffects:
SqlStdOperatorTable.SUM became the SUM operator
because of that SqlToRelConverter started rewriting windowed SUM -s into SUM0 -s
my opinion is that w.r.t to Druid this rewrite provides no real advantage - as SUM0 is serviced by SUM here
I believe that's not 100% correct in cases when it aggregates just null-s but that doesnt matter in this case
I propose to introduce back a local DRUID_SUM thing as an unchanged SUM and later when CALCITE-6020 is fixed ; we can drop that.
* coalesce on unnest row mismatch fix
* new example with coalesce over unnest with nested array columns
* New example with change in order which triggers the nvl
* new test plan update for useDefault=true
contains Enable already passing tests in DecoupledPlanningCalciteQueryTest #14996
enables a transpose rule to support a query plan in which the plan was in the shape:
Sort
Project
Aggregate
The aggregators had incorrect types for getResultType when shouldFinalze
is false. They had the finalized type, but they should have had the
intermediate type.
Also includes a refactor of how ExprMacroTable is handled in tests, to make
it easier to add tests for this to the MSQ module. The bug was originally
noticed because the incorrect result types caused MSQ queries with DS_HLL
to behave erratically.
These were added in #14977, but the implementations are incorrect, because they return null when the input arg is null. They should return false when the input is null. Remove them for now, rather than fixing them, since they're so new that they might as well never have existed.
This entails:
Removing the enableUnnest flag and additional machinery
Updating the datasource plan and frame processors to support unnest
Adding support in MSQ for UnnestDataSource and FilteredDataSource
CalciteArrayTest now has a MSQ test component
Additional tests for Unnest on MSQ
Currently, only the user who has submitted the async query has permission to interact with the status APIs for that async query. However, often we want an administrator to interact with these resources as well.
Druid handles these with the STATE resource traditionally, and if the requesting user has necessary permissions on it as well, alternatively, they should be allowed to interact with the status APIs, irrespective of whether they are the submitter of the query.
* Adding new function decode_base64_utf8 and expr macro
* using BaseScalarUnivariateMacroFunctionExpr
* Print stack trace in case of debug in ChainedExecutionQueryRunner
* fix static check
* Add IS [NOT] DISTINCT FROM to SQL and join matchers.
Changes:
1) Add "isdistinctfrom" and "notdistinctfrom" native expressions.
2) Add "IS [NOT] DISTINCT FROM" to SQL. It uses the new native expressions
when generating expressions, and is treated the same as equals and
not-equals when generating native filters on literals.
3) Update join matchers to have an "includeNull" parameter that determines
whether we are operating in "equals" mode or "is not distinct from"
mode.
* Main changes:
- Add ARRAY handling to "notdistinctfrom" and "isdistinctfrom".
- Include null in pushed-down filters when using "notdistinctfrom" in a join.
Other changes:
- Adjust join filter analyzer to more explicitly use InDimFilter's ValuesSets,
relying less on remembering to get it right to avoid copies.
* Remove unused "wrap" method.
* Fixes.
* Remove methods we do not need.
* Fix bug with INPUT_REF.
* SQL: Plan non-equijoin conditions as cross join followed by filter.
Druid has previously refused to execute joins with non-equality-based
conditions. This was well-intentioned: the idea was to push people to
write their queries in a different, hopefully more performant way.
But as we're moving towards fuller SQL support, it makes more sense to
allow these conditions to go through with the best plan we can come up
with: a cross join followed by a filter. In some cases this will allow
the query to run, and people will be happy with that. In other cases,
it will run into resource limits during execution. But we should at
least give the query a chance.
This patch also updates the documentation to explain how people can
tell whether their queries are being planned this way.
* cartesian is a word.
* Adjust tests.
* Update docs/querying/datasource.md
Co-authored-by: Benedict Jin <asdf2014@apache.org>
---------
Co-authored-by: Benedict Jin <asdf2014@apache.org>
This is due to the recursive filter creation in unnest storage adapter not performing correctly in case of an empty children. This PR addresses the issue
* Fix for schema mismatch to go down using the non vectorize path till we update the vectorized aggs properly
* Fixing a failed test
* Updating numericNilAgg
* Moving to use default values in case of nil agg
* Adding the same for first agg
* Fixing a test
* fixing vectorized string agg for last/first with cast if numeric
* Updating tests to remove mockito and cover the case of string first/last on non string columns
* Updating a test to vectorize
* Addressing review comments: Name change to NilVectorAggregator and using static variables now
* fixing intellij inspections
When materializing the results as frames, we defer the creation of the frames in ScanQueryQueryToolChest, which passes through the catch-all block reserved for catching cases when we don't have the complete row signature in the query (and falls back to the old code).
This PR aims to resolve it by adding the frame generation code to the try-catch block we have at the outer level.
changes:
* add back nested column v4 serializers
* 'json' schema by default still uses the newer 'nested common format' used by 'auto', but now has an optional 'formatVersion' property which can be specified to override format versions on native ingest jobs
* add system config to specify default column format stuff, 'druid.indexing.formats', and property 'druid.indexing.formats.nestedColumnFormatVersion' to specify system level preferred nested column format for friendly rolling upgrades from versions which do not support the newer 'nested common format' used by 'auto'
* update test
* update test
* format
* test
* fix0
* Revert "fix0"
This reverts commit 44992cb393.
* ok resultset
* add plan
* update test
* before rewind
* test
* fix toString/compare/test
* move test
* add timeColumn to hashCode
A new monitor SubqueryCountStatsMonitor which emits the metrics corresponding to the subqueries and their execution is now introduced. Moreover, the user can now also use the auto mode to automatically set the number of bytes available per query for the inlining of its subquery's results.
* Vectorizing earliest for numeric
* Vectorizing earliest string aggregator
* checkstyle fix
* Removing unnecessary exceptions
* Ignoring tests in MSQ as earliest is not supported for numeric there
* Fixing benchmarks
* Updating tests as MSQ does not support earliest for some cases
* Addressing review comments by adding the following:
1. Checking capabilities first before creating selectors
2. Removing mockito in tests for numeric first aggs
3. Removing unnecessary tests
* Addressing issues for dictionary encoded single string columns where we can use the dictionary ids instead of the entire string
* Adding a flag for multi value dimension selector
* Addressing comments
* 1 more change
* Handling review comments part 1
* Handling review comments and correctness fix for latest_by when the time expression need not be in sorted order
* Updating numeric first vector agg
* Revert "Updating numeric first vector agg"
This reverts commit 4291709901.
* Updating code for correctness issues
* fixing an issue with latest agg
* Adding more comments and removing an unnecessary check
* Addressing null checks for tie selector and only vectorize false for quantile sketches
Changes:
- Make ServiceMetricEvent.Builder extend ServiceEventBuilder<ServiceMetricEvent>
and thus convert it to a plain builder rather than a builder of builder.
- Add methods setCreatedTime , setMetricAndValue to the builder
* Update to Calcite 1.35.0
* Update from.ftl for Calcite 1.35.0.
* Fixed tests in Calcite upgrade by doing the following:
1. Added a new rule, CoreRules.PROJECT_FILTER_TRANSPOSE_WHOLE_PROJECT_EXPRESSIONS, to Base rules
2. Refactored the CorrelateUnnestRule
3. Updated CorrelateUnnestRel accordingly
4. Fixed a case with selector filters on the left where Calcite was eliding the virtual column
5. Additional test cases for fixes in 2,3,4
6. Update to StringListAggregator to fail a query if separators are not propagated appropriately
* Refactored for testcases to pass after the upgrade, introduced 2 new data sources for handling filters and select projects
* Added a literalSqlAggregator as the upgraded Calcite involved changes to subquery remove rule. This corrected plans for 2 queries with joins and subqueries by replacing an useless literal dimension with a post agg. Additionally a test with COUNT DISTINCT and FILTER which was failing with Calcite 1.21 is added here which passes with 1.35
* Updated to latest avatica and updated code as SqlUnknownTimeStamp is now used in Calcite which needs to be resolved to a timestamp literal
* Added a wrapper segment ref to use for unnest and filter segment reference
Fixes a case I missed in #14688 when the return type is STRING but its coming from a top level array typed column instead of a nested array column while making a vector object selector.
Also while here I noticed that the internal JSON_VALUE functions for array types were named inconsistently with the non-array functions, so I renamed them. These are not documented so it should not be disruptive in any way, since they are only used internally for rewrites while planning to make the correctly virtual column.
JSON_VALUE_RETURNING_ARRAY_VARCHAR -> JSON_VALUE_ARRAY_VARCHAR
JSON_VALUE_RETURNING_ARRAY_BIGINT -> JSON_VALUE_ARRAY_BIGINT
JSON_VALUE_RETURNING_ARRAY_DOUBLE -> JSON_VALUE_ARRAY_DOUBLE
The internal non-array functions are JSON_VALUE_VARCHAR, JSON_VALUE_BIGINT, and JSON_VALUE_DOUBLE.
* fix issue with nested virtual column array element vector selectors when input is numeric array but output is non-numeric
* add vector value selector for mixed numeric type variant and nested variant fields, tests
* fix issues with equality and range filters matching double values to long typed inputs
* adjust to ensure we never homogenize null, [], and [null] into [null] for expressions on real array columns
* Use OverlordClient for all Overlord RPCs.
Continuing the work from #12696, this patch removes HttpIndexingServiceClient
and the IndexingService flavor of DruidLeaderClient completely. All remaining
usages are migrated to OverlordClient.
Supporting changes include:
1) Add a variety of methods to OverlordClient.
2) Update MetadataTaskStorage to skip the complete-task lookup when
the caller requests zero completed tasks. This helps performance of
the "get active tasks" APIs, which don't want to see complete ones.
* Use less forbidden APIs.
* Fixes from CI.
* Add test coverage.
* Two more tests.
* Fix test.
* Updates from CR.
* Remove unthrown exceptions.
* Refactor to improve testability and test coverage.
* Add isNil tests.
* Remove unnecessary "deserialize" methods.
* Simplify bounds/range vs selectors/equality logic in SQL planning.
1) Consolidate duplicate code related to Expressions#buildTimeFloorFilter.
2) Cleaner logic in Expressions#toSimpleLeafFilter: choose bounds vs range
filter based solely on plannerContext.isUseBoundsAndSelectors, not also
considering rhs kind. Use parsed rhs in both paths (except for numerics
in the bound path).
3) Fix ArrayContains, ArrayOverlap to avoid equality filters when there is
an extractionFn present. Fixes a bug introduced in #14612.
* Avoid sending nonprimitives down the bound path.
* remove extractionFn from equality, null, and range filters
changes:
* EqualityFilter, NullFilter, and RangeFilter no longer support extractionFn
* SQL planner will use ExpressionFilter in the small number of cases where an extractionFn would have been used if sqlUseBoundsAndSelectors is set to false instead of equality/null/range filters
* fix bugs and add tests with serde, equals, and cache key for null, equality, and range filters
* test coverage fixes bugs
* adjust
* adjust again
* so persnickety
changes:
* new filters that preserve match value typing to better handle filtering different column types
* sql planner uses new filters by default in sql compatible null handling mode
* remove isFilterable from column capabilities
* proper handling of array filtering, add array processor to column processors
* javadoc for sql test filter functions
* range filter support for arrays, tons more tests, fixes
* add dimension selector tests for mixed type roots
* support json equality
* rename semantic index maker thingys to mostly have plural names since they typically make many indexes, e.g. StringValueSetIndex -> StringValueSetIndexes
* add cooler equality index maker, ValueIndexes
* fix missing string utf8 index supplier
* expression array comparator stuff
MSQ engine returns correct error codes for invalid user inputs in the query context. Also, using DruidExceptions for MSQ related errors happening in the Broker with improved error messages.
* Add aggregatorMergeStrategy property to SegmentMetadaQuery.
- Adds a new property aggregatorMergeStrategy to segmentMetadata query.
aggregatorMergeStrategy currently supports three types of merge strategies -
the legacy strict and lenient strategies, and the new latest strategy.
- The latest strategy considers the latest aggregator from the latest segment
by time order when there's a conflict when merging aggregators from different
segments.
- Deprecate lenientAggregatorMerge property; The API validates that both the new
and old properties are not set, and returns an exception.
- When merging segments as part of segmentMetadata query, the segments have a more
elaborate id -- <datasource>_<interval>_merged_<partition_number> format, similar to
the name format that segments usually contain. Previously it was simply "merged".
- Adjust unit tests to test the latest strategy, to assert the returned complete
SegmentAnalysis object instead of just the aggregators for completeness.
* Don't explicitly set strict strategy in tests
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/querying/segmentmetadataquery.md
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Fix a resource leak with Window processing
Additionally, in order to find the leak, there were
adjustments to the StupidPool to track leaks a bit better.
It would appear that the pool objects get GC'd during testing
for some reason which was causing some incorrect identification
of leaks from objects that had been returned but were GC'd along
with the pool.
* Suppress unused warning
sqlJoinAlgorithm is now a hint to the planner to execute the join in the specified manner. The planner can decide to ignore the hint if it deduces that the specified algorithm can be detrimental to the performance of the join beforehand.
* Claim full support for Java 17.
No production code has changed, except the startup scripts.
Changes:
1) Allow Java 17 without DRUID_SKIP_JAVA_CHECK.
2) Include the full list of opens and exports on both Java 11 and 17.
3) Document that Java 17 is both supported and preferred.
4) Switch some tests from Java 11 to 17 to get better coverage on the
preferred version.
* Doc update.
* Update errorprone.
* Update docker_build_containers.sh.
* Update errorprone in licenses.yaml.
* Add some more run-javas.
* Additional run-javas.
* Update errorprone.
* Suppress new errorprone error.
* Add exports and opens in ForkingTaskRunner for Java 11+.
Test, doc changes.
* Additional errorprone updates.
* Update for errorprone.
* Restore old fomatting in LdapCredentialsValidator.
* Copy bin/ too.
* Fix Java 15, 17 build line in docker_build_containers.sh.
* Update busybox image.
* One more java command.
* Fix interpolation.
* IT commandline refinements.
* Switch to busybox 1.34.1-glibc.
* POM adjustments, build and test one IT on 17.
* Additional debugging.
* Fix silly thing.
* Adjust command line.
* Add exports and opens one more place.
* Additional harmonization of strong encapsulation parameters.
* Fix ColumnSignature error message and jdk17 test issue.
On jdk17, the "problem" part of the error message could change from
NullPointerException to:
Cannot invoke "String.length()" because "s" is null
Due to the new more-helpful NPEs in Java 17. This broke the expectation
and led to test failures on this case.
This patch fixes the problem by improving the error message so it isn't
a generic NullPointerException.
* Fix format.
* Add support for DML WITH AS.
* One more UT for with as subquery.
* Add a test with join query
* Use root query prepared node instead of individual SqlNode types.
- Set the explain plan attributes after the query is prepared when
the query is planned and we've the finalized output names in the root
source rel node.
- Adjust tests; add unit test for negative ordinal case.
- Remove the exception / error handling logic from resolveClusteredBy
function since the validations now happen before it comes to the function
* Update comment.
This commit borrows some test definitions from Drill's test suite
and tries to use them to flesh out the full validation of window
function capbilities.
In order to be able to run these tests, we also add the ability to
run a Scan operation against segments, which also meant an
implementation of RowsAndColumns for frames.
with a RuntimeException. Now the RuntimeException is being replaced by an user facing DruidException of Invalid category which would allow calcite not to throw an uncategorized exception.
In these other cases, stick to plain "filter". This simplifies lots of
logic downstream, and doesn't hurt since we don't have intervals-specific
optimizations outside of tables.
Fixes an issue where we couldn't properly filter on a column from an
external datasource if it was named __time.
* Support complex variance object inputs for variance SQL agg function
* Add test
* Include complexTypeChecker, address PR comments
* Checkstyle, javadoc link
This PR aims to expose a new API called
"@path("/druid/v2/sql/statements/")" which takes the same payload as the current "/druid/v2/sql" endpoint and allows users to fetch results in an async manner.
* Cache parsed expressions and binding analysis in more places.
Main changes:
1) Cache parsed and analyzed expressions within PlannerContext for a
single SQL query.
2) Cache parsed expressions together with input binding analysis using
a new class AnalyzeExpr.
This speeds up SQL planning, because SQL planning involves parsing
analyzing the same expression strings over and over again.
* Fixes.
* Fix style.
* Fix test.
* Simplify: get rid of AnalyzedExpr, focus on caching.
* Rename parse -> parseExpression.
* Updates: use the target table directly, sanitized replace time chunks and clustered by cols.
* Add DruidSqlParserUtil and tests.
* minor refactor
* Use SqlUtil.isLiteral
* Throw ValidationException if CLUSTERED BY column descending order is specified.
- Fails query planning
* Some more tests.
* fixup existing comment
* Update comment
* checkstyle fix: remove unused imports
* Remove InsertCannotOrderByDescendingFault and deprecate the fault in readme.
* minor naming
* move deprecated field to the bottom
* update docs.
* add one more example.
* Collapsible query and result
* checkstyle fixes
* Code cleanup
* order by changes
* conditionally set attributes only for explain queries.
* Cleaner ordinal check.
* Add limit test and update javadoc.
* Commentary and minor adjustments.
* Checkstyle fixes.
* One more checkArg.
* add unexpected kind to exception.
Users can now add a guardrail to prevent subquery’s results from exceeding the set number of bytes by setting druid.server.http.maxSubqueryRows in Broker's config or maxSubqueryRows in the query context. This feature is experimental for now and would default back to row-based limiting in case it fails to get the accurate size of the results consumed by the query.
* SqlResults: Coerce arrays to lists for VARCHAR.
Useful for STRING_TO_MV, which returns VARCHAR at the SQL layer and an
ExprEval with String[] at the native layer.
* Fix style.
* Improve test coverage.
* Remove unnecessary throws.
* SQL OperatorConversions: Introduce.aggregatorBuilder, allow CAST-as-literal.
Four main changes:
1) Provide aggregatorBuilder, a more consistent way of defining the
SqlAggFunction we need for all of our SQL aggregators. The mechanism
is analogous to the one we already use for SQL functions
(OperatorConversions.operatorBuilder).
2) Allow CASTs of constants to be considered as "literalOperands". This
fixes an issue where various of our operators are defined with
OperandTypes.LITERAL as part of their checkers, which doesn't allow
casts. However, in these cases we generally _do_ want to allow casts.
The important piece is that the value must be reducible to a constant,
not that the SQL text is literally a literal.
3) Update DataSketches SQL aggregators to use the new aggregatorBuilder
functionality. The main user-visible effect here is [2]: the aggregators
would now accept, for example, "CAST(0.99 AS DOUBLE)" as a literal
argument. Other aggregators could be updated in a future patch.
4) Rename "requiredOperands" to "requiredOperandCount", because the
old name was confusing. (It rhymes with "literalOperands" but the
arguments mean different things.)
* Adjust method calls.
New metrics:
- `segment/metadatacache/refresh/time`: time taken to refresh segments per datasource
- `segment/metadatacache/refresh/count`: number of segments being refreshed per datasource
Add a new planning strategy that explicitly decouples the DAG from building the native query.
With this mode, it is Calcite's job to generate a "logical DAG" which is all of the various
DruidProject, DruidFilter, etc. nodes. We then take those nodes and use them to build a native
query. The current commit doesn't pass all tests, but it does work for some things and is a
decent starting baseline.
Introduce DruidException, an exception whose goal in life is to be delivered to a user.
DruidException itself has javadoc on it to describe how it should be used. This commit both introduces the Exception and adjusts some of the places that are generating exceptions to generate DruidException objects instead, as a way to show how the Exception should be used.
This work was a 3rd iteration on top of work that was started by Paul Rogers. I don't know if his name will survive the squash-and-merge, so I'm calling it out here and thanking him for starting on this.
Description:
Druid allows a configuration of load rules that may cause a used segment to not be loaded
on any historical. This status is not tracked in the sys.segments table on the broker, which
makes it difficult to determine if the unavailability of a segment is expected and if we should
not wait for it to be loaded on a server after ingestion has finished.
Changes:
- Track replication factor in `SegmentReplicantLookup` during evaluation of load rules
- Update API `/druid/coordinator/v1metadata/segments` to return replication factor
- Add column `replication_factor` to the sys.segments virtual table and populate it in
`MetadataSegmentView`
- If this column is 0, the segment is not assigned to any historical and will not be loaded.
* Throw ValidationException if CLUSTERED BY column descending order is specified.
- Fails query planning
* Some more tests.
* fixup existing comment
* Update comment
* checkstyle fix: remove unused imports
* Remove InsertCannotOrderByDescendingFault and deprecate the fault in readme.
* move deprecated field to the bottom
changes:
* auto columns no longer participate in generic 'null column' handling, this was a mistake to try to support and caused ingestion failures due to mismatched ColumnFormat, and will be replaced in the future with nested common format constant column functionality (not in this PR)
* fix bugs with auto columns which contain empty objects, empty arrays, or primitive types mixed with either of these empty constructs
* fix bug with bound filter when upper is null equivalent but is strict
* Add INFORMATION_SCHEMA.ROUTINES to expose Druid operators and functions.
* checkstyle
* remove IS_DETERMISITIC.
* test
* cleanup test
* remove logs and simplify
* fixup unit test
* Add docs for INFORMATION_SCHEMA.ROUTINES table.
* Update test and add another SQL query.
* add stuff to .spelling and checkstyle fix.
* Add more tests for custom operators.
* checkstyle and comment.
* Some naming cleanup.
* Add FUNCTION_ID
* The different Calcite function syntax enums get translated to FUNCTION
* Update docs.
* Cleanup markdown table.
* fixup test.
* fixup intellij inspection
* Review comment: nullable column; add a function to determine function syntax.
* More tests; add non-function syntax operators.
* More unit tests. Also add a separate test for DruidOperatorTable.
* actually just validate non-zero count.
* switch up the order
* checkstyle fixes.
This PR adds the following to the ATTRIBUTES column in the explain plan output:
- partitionedBy
- clusteredBy
- replaceTimeChunks
This PR leverages the work done in #14074, which added a new column ATTRIBUTES
to encapsulate all the statement-related attributes.
* Fix EarliestLatestBySqlAggregator signature; Include function name for all signatures.
* Single quote function signatures, space between args and remove \n.
* fixup UT assertion
It was found that several supported tasks / input sources did not have implementations for the methods used by the input source security feature, causing these tasks and input sources to fail when used with this feature. This pr adds the needed missing implementations. Also securing the sampling endpoint with input source security, when enabled.
This PR adds a new interface to control how SegmentMetadataCache chooses ColumnType when faced with differences between segments for SQL schemas which are computed, exposed as druid.sql.planner.metadataColumnTypeMergePolicy and adds a new 'least restrictive type' mode to allow choosing the type that data across all segments can best be coerced into and sets this as the default behavior.
This is a behavior change around when segment driven schema migrations take effect for the SQL schema. With latestInterval, the SQL schema will be updated as soon as the first job with the new schema has published segments, while using leastRestrictive, the schema will only be updated once all segments are reindexed to the new type. The benefit of leastRestrictive is that it eliminates a bunch of type coercion errors that can happen in SQL when types are varied across segments with latestInterval because the newest type is not able to correctly represent older data, such as if the segments have a mix of ARRAY and number types, or any other combinations that lead to odd query plans.
* Make resources an ordered collection so it's deterministic.
* test cleanup
* fixup docs.
* Replace deprecated ObjectNode#put() calls with ObjectNode#set().
The "new" IT framework provides a convenient way to package and run integration tests (ITs), but only for core modules. We have a use case to run an IT for a contrib extension: the proposed gRPC query extension. This PR provides the IT framework functionality to allow non-core ITs.
* Be able to load segments on Peons
This change introduces a new config on WorkerConfig
that indicates how many bytes of each storage
location to use for storage of a task. Said config
is divided up amongst the locations and slots
and then used to set TaskConfig.tmpStorageBytesPerTask
The Peons use their local task dir and
tmpStorageBytesPerTask as their StorageLocations for
the SegmentManager such that they can accept broadcast
segments.
* fix issues with filtering nulls on values coerced to numeric types
* fix issues with 'auto' type numeric columns in default value mode
* optimize variant typed columns without nested data
* more tests for 'auto' type column ingestion
* TimeBoundary: Use cursor when datasource is not a regular table.
Fixes a bug where TimeBoundary could return incorrect results with
INNER Join or inline data.
* Addl Javadocs.
* MSQ: Subclass CalciteJoinQueryTest, other supporting changes.
The main change is the new tests: we now subclass CalciteJoinQueryTest
in CalciteSelectJoinQueryMSQTest twice, once for Broadcast and once for
SortMerge.
Two supporting production changes for default-value mode:
1) InputNumberDataSource is marked as concrete, to allow leftFilter to
be pushed down to it.
2) In default-value mode, numeric frame field readers can now return nulls.
This is necessary when stacking joins on top of joins: nulls must be
preserved for semantics that match broadcast joins and native queries.
3) In default-value mode, StringFieldReader.isNull returns true on empty
strings in addition to nulls. This is more consistent with the behavior
of the selectors, which map empty strings to null as well in that mode.
As an effect of change (2), the InsertTimeNull change from #14020 (to
replace null timestamps with default timestamps) is reverted. IMO, this
is fine, as either behavior is defensible, and the change from #14020
hasn't been released yet.
* Adjust tests.
* Style fix.
* Additional tests.
* SQL planning: Consider subqueries in fewer scenarios.
Further adjusts logic in DruidRules that was previously adjusted in #13902.
The reason for the original change was that the comment "Subquery must be
a groupBy, so stage must be >= AGGREGATE" was no longer accurate. Subqueries
do not need to be groupBy anymore; they can really be any type of query.
If I recall correctly, the change was needed for certain window queries
to be able to plan on top of Scan queries.
However, this impacts performance negatively, because it causes many
additional outer-query scenarios to be considered, which is expensive.
So, this patch updates the matching logic to consider fewer scenarios. The
skipped scenarios are ones where we expect that, for one reason or another,
it isn't necessary to consider a subquery.
* Remove unnecessary escaping.
* Fix test.
* Updating segment map function for QueryDataSource to ensure group by of group by of join data source gets into proper segment map function path
* Adding unit tests for the failed case
* There you go coverage bot, be happy now
### Description
This pr fixes a few bugs found with the inputSource security feature.
1. `KillUnusedSegmentsTask` previously had no definition for the `getInputSourceResources`, which caused an unsupportedOperationException to be thrown when this task type was submitted with the inputSource security feature enabled. This task type should not require any input source specific resources, so returning an empty set for this task type now.
2. Fixed a bug where when the input source type security feature is enabled, all of the input source type specific resources used where authenticated against:
`{"resource": {"name": "EXTERNAL", "type": "{INPUT_SOURCE_TYPE}"}, "action": "READ"}`
When they should be instead authenticated against:
`{"resource": {"name": "{INPUT_SOURCE_TYPE}", "type": "EXTERNAL"}, "action": "READ"}`
3. fixed bug where supervisor tasks were not authenticated against the specific input source types used, if input source security feature was enabled.
This commit adds attributes that contain metadata information about the query
in the EXPLAIN PLAN output. The attributes currently contain two items:
- `statementTyp`: SELECT, INSERT or REPLACE
- `targetDataSource`: provides the target datasource name for DML statements
It is added to both the legacy and native query plan outputs.
* SQL: Fix natural comparator selection for groupBy.
DruidQuery.computeSorting had some unique logic for finding natural
comparators for SQL types. It should be using getStringComparatorForRelDataType
instead.
One good effect here is that the comparator for BOOLEAN is now
NUMERIC rather than LEXICOGRAPHIC. The test case illustrates this.
* Remove msqCompatible, for now.
* Fix test.
* MSQ: Use the same result coercion routines as the regular SQL endpoint.
The main changes are to move NativeQueryMaker.coerce to SqlResults, and
to formally make the list of sqlTypeNames from the MSQ results reports
use SqlTypeNames.
- Change the default to MSQ-compatible rather than MSQ-incompatible.
The explicit marker function is now "notMsqCompatible()".
* MSQ: Support for querying lookup and inline data directly.
Main changes:
1) Add of LookupInputSpec and DataSourcePlan.forLookup.
2) Add InlineInputSpec, and modify of DataSourcePlan.forInline to use
this instead of an ExternalInputSpec with JSON. This allows the inline
data to act as the right-hand side of a join, if needed.
Supporting changes:
1) Modify JoinDataSource's leftFilter validation to be a little less
strict: it's now OK with leftFilter being attached to any concrete
leaf (no children) datasource, rather than requiring it be a table.
This allows MSQ to create JoinDataSource with InputNumberDataSource
as the base.
2) Add SegmentWranglerModule to CliIndexer, CliPeon. This allows them to
query lookups and inline data directly.
* Updates based on CI.
* Additional tests.
* Style fix.
* Remove unused import.
### Description
This change allows for input sources used during MSQ ingestion to be authorized for multiple input source types, instead of just 1. Such an input source that allows for multiple types is the CombiningInputSource.
Also fixed bug that caused some input source specific functions to be authorized against the permissions
`
[
new ResourceAction(new Resource(ResourceType.EXTERNAL, ResourceType.EXTERNAL), Action.READ),
new ResourceAction(new Resource(ResourceType.EXTERNAL, {input_source_type}), Action.READ)
]
`
when the inputSource based authorization feature is enabled, when it should instead be authorized against
`
[
new ResourceAction(new Resource(ResourceType.EXTERNAL, {input_source_type}), Action.READ)
]
`
* Frames: Ensure nulls are read as default values when appropriate.
Fixes a bug where LongFieldWriter didn't write a properly transformed
zero when writing out a null. This had no meaningful effect in SQL-compatible
null handling mode, because the field would get treated as a null anyway.
But it does have an effect in default-value mode: it would cause Long.MIN_VALUE
to get read out instead of zero.
Also adds NullHandling checks to the various frame-based column selectors,
allowing reading of nullable frames by servers in default-value mode.
Fixes#13837.
### Description
This change allows for input source type security in the native task layer.
To enable this feature, the user must set the following property to true:
`druid.auth.enableInputSourceSecurity=true`
The default value for this property is false, which will continue the existing functionality of needing authorization to write to the respective datasource.
When this config is enabled, the users will be required to be authorized for the following resource action, in addition to write permission on the respective datasource.
`new ResourceAction(new Resource(ResourceType.EXTERNAL, {INPUT_SOURCE_TYPE}, Action.READ`
where `{INPUT_SOURCE_TYPE}` is the type of the input source being used;, http, inline, s3, etc..
Only tasks that provide a non-default implementation of the `getInputSourceResources` method can be submitted when config `druid.auth.enableInputSourceSecurity=true` is set. Otherwise, a 400 error will be thrown.
* smarter nested column index utilization
changes:
* adds skipValueRangeIndexScale and skipValuePredicateIndexScale to ColumnConfig (e.g. DruidProcessingConfig) available as system config via druid.processing.indexes.skipValueRangeIndexScale and druid.processing.indexes.skipValuePredicateIndexScale
* NestedColumnIndexSupplier uses skipValueRangeIndexScale and skipValuePredicateIndexScale to multiply by the total number of rows to be processed to determine the threshold at which we should no longer consider using bitmap indexes because it will be too many operations
* Default values for skipValueRangeIndexScale and skipValuePredicateIndexScale have been initially set to 0.08, but are separate to allow independent tuning
* these are not documented on purpose yet because they are kind of hard to explain, the mainly exist to help conduct larger scale experiments than the jmh benchmarks used to derive the initial set of values
* these changes provide a pretty sweet performance boost for filter processing on nested columns
* Always use file sizes when determining batch ingest splits.
Main changes:
1) Update CloudObjectInputSource and its subclasses (S3, GCS,
Azure, Aliyun OSS) to use SplitHintSpecs in all cases. Previously, they
were only used for prefixes, not uris or objects.
2) Update ExternalInputSpecSlicer (MSQ) to consider file size. Previously,
file size was ignored; all files were treated as equal weight when
determining splits.
A side effect of these changes is that we'll make additional network
calls to find the sizes of objects when users specify URIs or objects
as opposed to prefixes. IMO, this is worth it because it's the only way
to respect the user's split hint and task assignment settings.
Secondary changes:
1) S3, Aliyun OSS: Use getObjectMetadata instead of listObjects to get
metadata for a single object. This is a simpler call that is also
expected to be less expensive.
2) Azure: Fix a bug where getBlobLength did not populate blob
reference attributes, and therefore would not actually retrieve the
blob length.
3) MSQ: Align dynamic slicing logic between ExternalInputSpecSlicer and
TableInputSpecSlicer.
4) MSQ: Adjust WorkerInputs to ensure there is always at least one
worker, even if it has a nil slice.
* Add msqCompatible to testGroupByWithImpossibleTimeFilter.
* Fix tests.
* Add additional tests.
* Remove unused stuff.
* Remove more unused stuff.
* Adjust thresholds.
* Remove irrelevant test.
* Fix comments.
* Fix bug.
* Updates.
changes:
* introduce ColumnFormat to separate physical storage format from logical type. ColumnFormat is now used instead of ColumnCapabilities to get column handlers for segment creation
* introduce new 'auto' type indexer and merger which produces a new common nested format of columns, which is the next logical iteration of the nested column stuff. Essentially this is an automatic type column indexer that produces the most appropriate column for the given inputs, making either STRING, ARRAY<STRING>, LONG, ARRAY<LONG>, DOUBLE, ARRAY<DOUBLE>, or COMPLEX<json>.
* revert NestedDataColumnIndexer, NestedDataColumnMerger, NestedDataColumnSerializer to their version pre #13803 behavior (v4) for backwards compatibility
* fix a bug in RoaringBitmapSerdeFactory if anything actually ever wrote out an empty bitmap using toBytes and then later tried to read it (the nerve!)
* Planning correctly for order by queries on time which previously threw a planning error
* Updating toDruidQueryForExplaining on a query data source if there is a window on the partial query
* select sum(c) on an unnested column now does not return 'Type mismatch' error and works properly
* Making sure an inner join query works properly
* Having on unnested column with a group by now works correctly
* count(*) on an unnested query now works correctly
This change introduces the concept of input source type security model, proposed in #13837.. With this change, this feature is only available at the SQL layer, but we will expand to native layer in a follow up PR.
To enable this feature, the user must set the following property to true:
druid.auth.enableInputSourceSecurity=true
The default value for this property is false, which will continue the existing functionality of having the usage all external sources being authorized against the hardcoded resource action
new ResourceAction(new Resource(ResourceType.EXTERNAL, ResourceType.EXTERNAL), Action.READ
When this config is enabled, the users will be required to be authorized for the following resource action
new ResourceAction(new Resource(ResourceType.EXTERNAL, {INPUT_SOURCE_TYPE}, Action.READ
where {INPUT_SOURCE_TYPE} is the type of the input source being used;, http, inline, s3, etc..
Documentation has not been added for the feature as it is not complete at the moment, as we still need to enable this for the native layer in a follow up pr.
array columns!
changes:
* add support for storing nested arrays of string, long, and double values as specialized nested columns instead of breaking them into separate element columns
* nested column type mimic behavior means that columns ingested with only root arrays of primitive values will be ARRAY typed columns
* neat test refactor stuff
* add v4 segment test
* add array element indexes
* add tests for unnest and array columns
* fix unnest column value selector cursor handling of null and empty arrays
* Refactoring and bug fixes on top of unnest. The filter now is passed inside the unnest cursors. Added tests for scenarios such as
1. filter on unnested column which involves a left filter rewrite
2. filter on unnested virtual column which pushes the filter to the right only and involves no rewrite
3. not filters
4. SQL functions applied on top of unnested column
5. null present in first row of the column to be unnested
changes:
* fixes inconsistent handling of byte[] values between ExprEval.bestEffortOf and ExprEval.ofType, which could cause byte[] values to end up as java toString values instead of base64 encoded strings in ingest time transforms
* improved ExpressionTransform binding to re-use ExprEval.bestEffortOf when evaluating a binding instead of throwing it away
* improved ExpressionTransform array handling, added RowFunction.evalDimension that returns List<String> to back Row.getDimension and remove the automatic coercing of array types that would typically happen to expression transforms unless using Row.getDimension
* added some tests for ExpressionTransform with array inputs
* improved ExpressionPostAggregator to use partial type information from decoration
* migrate some test uses of InputBindings.forMap to use other methods
* Refactoring and bug fixes on top of unnest. The filter now is passed inside the unnest cursors. Added tests for scenarios such as
1. filter on unnested column which involves a left filter rewrite
2. filter on unnested virtual column which pushes the filter to the right only and involves no rewrite
3. not filters
4. SQL functions applied on top of unnested column
5. null present in first row of the column to be unnested
* Various changes and fixes to UNNEST.
Native changes:
1) UnnestDataSource: Replace "column" and "outputName" with "virtualColumn".
This enables pushing expressions into the datasource. This in turn
allows us to do the next thing...
2) UnnestStorageAdapter: Logically apply query-level filters and virtual
columns after the unnest operation. (Physically, filters are pulled up,
when possible.) This is beneficial because it allows filters and
virtual columns to reference the unnested column, and because it is
consistent with how the join datasource works.
3) Various documentation updates, including declaring "unnest" as an
experimental feature for now.
SQL changes:
1) Rename DruidUnnestRel (& Rule) to DruidUnnestRel (& Rule). The rel
is simplified: it only handles the UNNEST part of a correlated join.
Constant UNNESTs are handled with regular inline rels.
2) Rework DruidCorrelateUnnestRule to focus on pulling Projects from
the left side up above the Correlate. New test testUnnestTwice verifies
that this works even when two UNNESTs are stacked on the same table.
3) Include ProjectCorrelateTransposeRule from Calcite to encourage
pushing mappings down below the left-hand side of the Correlate.
4) Add a new CorrelateFilterLTransposeRule and CorrelateFilterRTransposeRule
to handle pulling Filters up above the Correlate. New tests
testUnnestWithFiltersOutside and testUnnestTwiceWithFilters verify
this behavior.
5) Require a context feature flag for SQL UNNEST, since it's undocumented.
As part of this, also cleaned up how we handle feature flags in SQL.
They're now hooked into EngineFeatures, which is useful because not
all engines support all features.
Zoltan Haindrich
Gian Merlino
Clint Wylie
AlbericByte
Soumyava
Adarsh Sanjeev
sb89594
Rishabh Singh
Pranav
Abhishek Agarwal
Laksh Singla
Zoltan Haindrich
Vishesh Garg
Xavier Léauté
Suneet Saldanha
Kashif Faraz
AmatyaAvadhanula
Abhishek Radhakrishnan
imply-cheddar
Jonathan Wei
Karan Kumar
Rohan Garg
zachjsh
Paul Rogers
Atul Mohan