* Tutorials use new ingestion spec where possible
There are 2 main changes
* Use task type index_parallel instead of index
* Remove the use of parser + firehose in favor of inputFormat + inputSource
index_parallel is the preferred method starting in 0.17. Setting the job to
index_parallel with the default maxNumConcurrentSubTasks(1) is the equivalent
of an index task
Instead of using a parserSpec, dimensionSpec and timestampSpec have been
promoted to the dataSchema. The format is described in the ioConfig as the
inputFormat.
There are a few cases where the new format is not supported
* Hadoop must use firehoses instead of the inputSource and inputFormat
* There is no equivalent of a combining firehose as an inputSource
* A Combining firehose does not support index_parallel
* fix typo
* Fail superbatch range partition multi dim values
Change the behavior of parallel indexing range partitioning to fail
ingestion if any row had multiple values for the partition dimension.
After this change, the behavior matches that of hadoop indexing.
(Previously, rows with multiple dimension values would be skipped.)
* Improve err msg, rename method, rename test class
* Allow startup scripts to specify java home
The startup scripts now look for java in 3 locations. The order is from
most related to druid to least, ie
${DRUID_JAVA_HOME}
${JAVA_HOME}
${PATH}
* Update fn names and clean up code
* final round of fixes
* fix spellcheck
* Parallel indexing single dim partitions
Implements single dimension range partitioning for native parallel batch
indexing as described in #8769. This initial version requires the
druid-datasketches extension to be loaded.
The algorithm has 5 phases that are orchestrated by the supervisor in
`ParallelIndexSupervisorTask#runRangePartitionMultiPhaseParallel()`.
These phases and the main classes involved are described below:
1) In parallel, determine the distribution of dimension values for each
input source split.
`PartialDimensionDistributionTask` uses `StringSketch` to generate
the approximate distribution of dimension values for each input
source split. If the rows are ungrouped,
`PartialDimensionDistributionTask.UngroupedRowDimensionValueFilter`
uses a Bloom filter to skip rows that would be grouped. The final
distribution is sent back to the supervisor via
`DimensionDistributionReport`.
2) The range partitions are determined.
In `ParallelIndexSupervisorTask#determineAllRangePartitions()`, the
supervisor uses `StringSketchMerger` to merge the individual
`StringSketch`es created in the preceding phase. The merged sketch is
then used to create the range partitions.
3) In parallel, generate partial range-partitioned segments.
`PartialRangeSegmentGenerateTask` uses the range partitions
determined in the preceding phase and
`RangePartitionCachingLocalSegmentAllocator` to generate
`SingleDimensionShardSpec`s. The partition information is sent back
to the supervisor via `GeneratedGenericPartitionsReport`.
4) The partial range segments are grouped.
In `ParallelIndexSupervisorTask#groupGenericPartitionLocationsPerPartition()`,
the supervisor creates the `PartialGenericSegmentMergeIOConfig`s
necessary for the next phase.
5) In parallel, merge partial range-partitioned segments.
`PartialGenericSegmentMergeTask` uses `GenericPartitionLocation` to
retrieve the partial range-partitioned segments generated earlier and
then merges and publishes them.
* Fix dependencies & forbidden apis
* Fixes for integration test
* Address review comments
* Fix docs, strict compile, sketch check, rollup check
* Fix first shard spec, partition serde, single subtask
* Fix first partition check in test
* Misc rewording/refactoring to address code review
* Fix doc link
* Split batch index integration test
* Do not run parallel-batch-index twice
* Adjust last partition
* Split ITParallelIndexTest to reduce runtime
* Rename test class
* Allow null values in range partitions
* Indicate which phase failed
* Improve asserts in tests
* add prefixes support to google input source, making it symmetrical-ish with s3
* docs
* more better, and tests
* unused
* formatting
* javadoc
* dependencies
* oops
* review comments
* better javadoc
* add s3 input source for native batch ingestion
* add docs
* fixes
* checkstyle
* lazy splits
* fixes and hella tests
* fix it
* re-use better iterator
* use key
* javadoc and checkstyle
* exception
* oops
* refactor to use S3Coords instead of URI
* remove unused code, add retrying stream to handle s3 stream
* remove unused parameter
* update to latest master
* use list of objects instead of object
* serde test
* refactor and such
* now with the ability to compile
* fix signature and javadocs
* fix conflicts yet again, fix S3 uri stuffs
* more tests, enforce uri for bucket
* javadoc
* oops
* abstract class instead of interface
* null or empty
* better error
* Fix the potential race SplittableInputSource.getNumSplits() and SplittableInputSource.createSplits() in TaskMonitor
* Fix docs and javadoc
* Add unit tests for large or small estimated num splits
* add override
* add parquet support to native batch
* cleanup
* implement toJson for sampler support
* better binaryAsString test
* docs
* i hate spellcheck
* refactor toMap conversion so can be shared through flattenerMaker, default impls should be good enough for orc+avro, fixup for merge with latest
* add comment, fix some stuff
* adjustments
* fix accident
* tweaks
If the JDBC drivers are missing from the lookup extensions, throw an
exception that directs the user how to resolve the issue. This change is
a follow up to #8825.
* transformSpec + array expressions
changes:
* added array expression support to transformSpec
* removed ParseSpec.verify since its only use afaict was preventing transform expr that did not replace their input from functioning
* hijacked index task test to test changes
* remove docs about being unsupported
* re-arrange test assert
* unused imports
* imports
* fix tests
* preserve types
* suppress warning, fixes, add test
* formatting
* cleanup
* better list to array type conversion and tests
* fix oops
* Add reference to `druid.storage.type`
This should be in here. Without setting storage type to S3 globally it will obviously not be used, even if all other parameters are correct.
* Update s3.md
Add global storage parameter to knob table.
* Update s3.md
* SQL: EARLIEST, LATEST aggregators.
I chose these names instead of FIRST, LAST because those are already
reserved functions in Calcite that mean something different. I think
these are also better names anyway.
* Finalify.
* SQL updates.
* Adjust aggregator calls.
* Validations, test updates.
* Review docs.
* sketch of broker parallel merges done in small batches on fork join pool
* fix non-terminating sequences, auto compute parallelism
* adjust benches
* adjust benchmarks
* now hella more faster, fixed dumb
* fix
* remove comments
* log.info for debug
* javadoc
* safer block for sequence to yielder conversion
* refactor LifecycleForkJoinPool into LifecycleForkJoinPoolProvider which wraps a ForkJoinPool
* smooth yield rate adjustment, more logs to help tune
* cleanup, less logs
* error handling, bug fixes, on by default, more parallel, more tests
* remove unused var
* comments
* timeboundary mergeFn
* simplify, more javadoc
* formatting
* pushdown config
* use nanos consistently, move logs back to debug level, bit more javadoc
* static terminal result batch
* javadoc for nullability of createMergeFn
* cleanup
* oops
* fix race, add docs
* spelling, remove todo, add unhandled exception log
* cleanup, revert unintended change
* another unintended change
* review stuff
* add ParallelMergeCombiningSequenceBenchmark, fixes
* hyper-threading is the enemy
* fix initial start delay, lol
* parallelism computer now balances partition sizes to partition counts using sqrt of sequence count instead of sequence count by 2
* fix those important style issues with the benchmarks code
* lazy sequence creation for benchmarks
* more benchmark comments
* stable sequence generation time
* update defaults to use 100ms target time, 4096 batch size, 16384 initial yield, also update user docs
* add jmh thread based benchmarks, cleanup some stuff
* oops
* style
* add spread to jmh thread benchmark start range, more comments to benchmarks parameters and purpose
* retool benchmark to allow modeling more typical heterogenous heavy workloads
* spelling
* fix
* refactor benchmarks
* formatting
* docs
* add maxThreadStartDelay parameter to threaded benchmark
* why does catch need to be on its own line but else doesnt
* Add option lateMessageRejectionStartDate
* Use option lateMessageRejectionStartDate
* Fix tests
* Add lateMessageRejectionStartDate to kafka indexing service
* Update tests kafka indexing service
* Fix tests for KafkaSupervisorTest
* Add lateMessageRejectionStartDate to KinesisSupervisorIOConfig
* Fix var name
* Update documentation
* Add check lateMessageRejectionStartDateTime and lateMessageRejectionPeriod, fails if both were specified.
* remove select query
* thanks teamcity
* oops
* oops
* add back a SelectQuery class that throws RuntimeExceptions linking to docs
* adjust text
* update docs per review
* deprecated
Since it hasn't received updates or community interest in a while, it makes sense
to de-emphasize it in the distribution and most documentation (outside of simple
mentions of its existence).
* Support assign tasks to run on different tiers of MiddleManagers
* address comments
* address comments
* rename tier to category and docs
* doc
* fix doc
* fix spelling errors
* docs
* Stateful auto compaction
* javaodc
* add removed test back
* fix test
* adding indexSpec to compactionState
* fix build
* add lastCompactionState
* address comments
* extract CompactionState
* fix doc
* fix build and test
* Add a task context to store compaction state; add javadoc
* fix it test
* IOConfig for compaction task
* add javadoc, doc, unit test
* fix webconsole test
* add spelling
* address comments
* fix build and test
* address comments
* Add tier based usage metrics for historical nodes to help with druid historical autoscaling
Add tier based usage metrics for historical nodes to help druid cluster orchestration systems understand the historical node usage and requirements. Following metrics would be helpful -
tier/required/capacity- total capacity in bytes required in each tier. Dimensions - tier
tier/total/capacity - total capacity in bytes available in a given tier. Dimension - tier
tier/historical/count - no. of historical nodes available in each tier. Dimension - tier
tier/replication/factor - configured maximum replication factor in given tier. Dimension - tier
* fix unit test failures
* Support LDAP authentication/authorization
* fixed integration-tests
* fixed Travis CI build errors related to druid-security module
* fixed failing test
* fixed failing test header
* added comments, force build
* fixes for strict compilation spotbugs checks
* removed authenticator rolling credential update feature
* removed escalator rolling credential update feature
* fixed teamcity inspection deprecated API usage error
* fixed checkstyle execution error, removed unused import
* removed cached config as part of removing authenticator rolling credential update feature
* removed config bundle entity as part of removing authenticator rolling credential update feature
* refactored ldao configuration
* added support for SSLContext configuration and TLSCertificateChecker
* removed check to return authentication failure when user has no group assigned, will be checked and handled by the authorizer
* Separate out authorizer checks between metadata-backed store user and LDAP user/groups
* refactored BasicSecuritySSLSocketFactory usage to fix strict compilation spotbugs checks
* fixes build issue
* final review comments updates
* final review comments updates
* fixed LGTM and spellcheck alerts
* Fixed Avatica auth failure error message check
* Updated metadata credentials validator exception message string, replaced DB with metadata store
* groupBy query: optional limit push down to segment scan
* make segment level limit push down configurable
* fix teamcity errors
* fix segment limit pushdown flag handling on query level config override
* use equals for comparator check
* fix sql and null handling
* fix unused imports
* handle null offset in NullableValueGroupByColumnSelectorStrategy for buffer comparator similar to RowBasedGrouperHelper.NullableRowBasedKeySerdeHelper
* fix segment underReplicated/unavailable counts to be gauges instead of counters
* fix jvm/gc/cpu to be a counter instead of timre
jvm/gc/cpu represents the total cpu time spent for multiple gc
invocations, not the time spent in each gc cycle.
the number needs to be divided by jvm/gc/count to get the average gc
time per cycle
* update docs
* fix spellcheck
* Implementing dropwizard emitter for druid
making metric manager and alert emitters as optional
* Refactor and make things work
more improvements
improve docs
refactrings
* Fix teamcity inspections
* review comments
* more review comments
* add limit to max number of gauges
* update pom version
* fix pom
* review comments
* review comment
* review comments
* fix broken doc link
review comments
review comments
* review comments
* fix checkstyle
* more spell check fixes
* fix travis failures
* #7641 - Changing segment distribution algorithm to distribute segments to multiple segment cache locations
* Fixing indentation
* WIP
* Adding interface for location strategy selection, least bytes used strategy impl, round-robin strategy impl, locationSelectorStrategy config with least bytes used strategy as the default strategy
* fixing code style
* Fixing test
* Adding a method visible only for testing, fixing tests
* 1. Changing the method contract to return an iterator of locations instead of a single best location. 2. Check style fixes
* fixing the conditional statement
* Added testSegmentDistributionUsingLeastBytesUsedStrategy, fixed testSegmentDistributionUsingRoundRobinStrategy
* to trigger CI build
* Add documentation for the selection strategy configuration
* to re trigger CI build
* updated docs as per review comments, made LeastBytesUsedStorageLocationSelectorStrategy.getLocations a synchronzied method, other minor fixes
* In checkLocationConfigForNull method, using getLocations() to check for null instead of directly referring to the locations variable so that tests overriding getLocations() method do not fail
* Implementing review comments. Added tests for StorageLocationSelectorStrategy
* Checkstyle fixes
* Adding java doc comments for StorageLocationSelectorStrategy interface
* checkstyle
* empty commit to retrigger build
* Empty commit
* Adding suppressions for words leastBytesUsed and roundRobin of ../docs/configuration/index.md file
* Impl review comments including updating docs as suggested
* Removing checkLocationConfigForNull(), @NotEmpty annotation serves the purpose
* Round robin iterator to keep track of the no. of iterations, impl review comments, added tests for round robin strategy
* Fixing the round robin iterator
* Removed numLocationsToTry, updated java docs
* changing property attribute value from tier to type
* Fixing assert messages
* Added live reports for Kafka and Native batch task
* Removed unused local variables
* Added the missing unit test
* Refine unit test logic, add implementation for HttpRemoteTaskRunner
* checksytle fixes
* Update doc descriptions for updated API
* remove unnecessary files
* Fix spellcheck complaints
* More details for api descriptions
* Adjust defaults for hashed partitioning
If neither the partition size nor the number of shards are specified,
default to partitions of 5,000,000 rows (similar to the behavior of
dynamic partitions). Previously, both could be null and cause incorrect
behavior.
Specifying both a partition size and a number of shards now results in
an error instead of ignoring the partition size in favor of using the
number of shards. This is a behavior change that makes it more apparent
to the user that only one of the two properties will be honored
(previously, a message was just logged when the specified partition size
was ignored).
* Fix test
* Handle -1 as null
* Add -1 as null tests for single dim partitioning
* Simplify logic to handle -1 as null
* Address review comments
* Rename partition spec fields
Rename partition spec fields to be consistent across the various types
(hashed, single_dim, dynamic). Specifically, use targetNumRowsPerSegment
and maxRowsPerSegment in favor of targetPartitionSize and
maxSegmentSize. Consistent and clearer names are easier for users to
understand and use.
Also fix various IntelliJ inspection warnings and doc spelling mistakes.
* Fix test
* Improve docs
* Add targetRowsPerSegment to HashedPartitionsSpec
* move google ext docs from contrib to core
* fix links
* revert unintended change
* more links, add note to example ext doc that it was removed, unlink from sidebar
* Exit JVM on curator unhandled errors
If an unhandled error occurs when curator is talking to ZooKeeper, exit
the JVM in addition to stopping the lifecycle to prevent the process
from being left in a zombie state. With this change,
BoundedExponentialBackoffRetryWithQuit is no longer needed as when
curator exceeds the configured retries, it triggers its unhandled error
listeners. A new "connectionTimeoutMs" CuratorConfig setting is added
mostly to facilitate testing curator unhandled errors, but it may be
useful for users as well.
* Address review comments
* Add realization for updating version of derived segments in MaterializedView
* add unit test, and change code style for the sake of ease of understanding
* fix document's mistake of expression
* Zookeeper version is updated.
* Zookeeper version is updated at licenses.yaml
* licenses.yaml is updated and dependencies are fixed to make the project successfully build.
* Zookeeper versions are fixed at licenses.yaml
* Add group_id to overlord tasks API and sys.tasks table
* adjust test
* modify docs
* Make groupId nullable
* fix integration test
* fix toString
* Remove groupId from TaskInfo
* Modify docs and tests
* modify TaskMonitorTest
* migrate binary notice entries to live in licenses.yaml, use licenses.yaml and NOTICE to generate NOTICE.BINARY at distribution time
* +x
* move release scripts to distribution/bin, fixup notice script, trim dependencies for avro and kerberos in licenses.yaml
* add missing hdfs-storage dependencies
* revert to old syntax, fixes
* formatting
* update notices for recently updated dependencies
* Add TaskResourceCleaner; fix a couple of concurrency bugs in batch tasks
* kill runner when it's ready
* add comment
* kill run thread
* fix test
* Take closeable out of Appenderator
* add javadoc
* fix test
* fix test
* update javadoc
* add javadoc about killed task
* address comment
* Add support for parallel native indexing with shuffle for perfect rollup.
* Add comment about volatiles
* fix test
* fix test
* handling missing exceptions
* more clear javadoc for stopGracefully
* unused import
* update javadoc
* Add missing statement in javadoc
* address comments; fix doc
* add javadoc for isGuaranteedRollup
* Rename confusing variable name and fix typos
* fix typos; move fetch() to a better home; fix the expiration time
* add support https
* Enable ability to toggle SegmentMetadata request logging on/off
* Move SegmentMetadata query log filter to FilteredRequestLogger
* Update documentation to reflect the segment metadata flag moving to the filtered request logger
* Modify patch to allow blacklist of query types to not log to request logger
* Address styling and naming requests following latest code review
* Fix indentation on multiple locations per Druid style rules
* Add a cluster-wide configuration to force timeChunk lock and add a doc for segment locking
* add more test
* javadoc for missingIntervalsInOverwriteMode
* Fix test
* Address comments
* avoid spotbugs
* Add IPv4 SQL functions
New SQL functions for filtering IPv4 addresses:
- IPV4_MATCH: Check if IP address belongs to a subnet
- IPV4_PARSE: Convert string IP address to integer
- IPV4_STRINGIFY: Convert integer IP address to string
These are the SQL analogs of the druid expressions with the same name.
Filtering is more efficient when operating on IP addresses as integers
instead of strings.
* Refactor operator conversions into named constants
* Add IPv4 druid expressions
New druid expressions for filtering IPv4 addresses:
- ipv4address_match: Check if IP address belongs to a subnet
- ipv4address_parse: Convert string IP address to long
- ipv4address_stringify: Convert long IP address to string
These expressions operate on IP addresses represented as either strings
or longs, so that they can be applied to dimensions with mixed
representation of IP addresses. The filtering is more efficient when
operating on IP addresses as longs. In other words, the intended use
case is:
1) Use ipv4address_parse to convert to long at ingestion time
2) Use ipv4address_match to filter (on longs) at query time
3) Use ipv4adress_stringify to convert to (readable) string at query
time
* Fix licenses and null handling
* Simplify IPv4 expressions
* Fix tests
* Fix check for valid ipv4 address string
* Use partitionsSpec for all task types
* fix doc
* fix typos and revert to use isPushRequired
* address comments
* move partitionsSpec to core
* remove hadoopPartitionsSpec
* firehose doc adjustments
* fix typo
* additional information on parser types in ingestion docs
* clarify ingest segment firehose docs, add sql firehose examples to sql extension pages
* fixit
* make sql firehose more forgiving my always constructing a MapInputRowParser from the parseSpec of whatever actual InputRowParser impl is provided, remove doc references to map based parsers
* transforms
* fix tests
* remove unecessary lock in ForegroundCachePopulator leading to a lot of contention
* mutableboolean, javadocs,document some cache configs that were missing
* more doc stuff
* adjustments
* remove background documentation
* 1. Added TimestampExtractExprMacro.Unit for MILLISECOND 2. expr eval for MILLISECOND 3. Added a test case to test extracting millisecond from expression. #7935
* 1. Adding DATASOURCE4 in tests. 2. Adding test TimeExtractWithMilliseconds
* Fixing testInformationSchemaTables test
* Fixing failing tests in DruidAvaticaHandlerTest
* Adding cannotVectorize() call before the test
* Extract time function - Adding support for MICROSECOND, ISODOW, ISOYEAR and CENTURY time units, documentation changes.
* Adding MILLISECOND in test case
* Adding support DECADE and MILLENNIUM, updating test case and documentation
* Fixing expression eval for DECADE and MILLENIUM
The Markdown dialect used when publishing the documentation to the web
site is much more sensitive than Github-flavoured Markdown. In
particular, it requires an empty line before code blocks (unless the
code block starts right after a heading), otherwise the code block
gets formatted in-line with the previous paragraph. Likewise for
bullet-point lists.
* Benchmarks: New SqlBenchmark, add caching & vectorization to some others.
- Introduce a new SqlBenchmark geared towards benchmarking a wide
variety of SQL queries. Rename the old SqlBenchmark to
SqlVsNativeBenchmark.
- Add (optional) caching to SegmentGenerator to enable easier
benchmarking of larger segments.
- Add vectorization to FilteredAggregatorBenchmark and GroupByBenchmark.
* Query vectorization.
This patch includes vectorized timeseries and groupBy engines, as well
as some analogs of your favorite Druid classes:
- VectorCursor is like Cursor. (It comes from StorageAdapter.makeVectorCursor.)
- VectorColumnSelectorFactory is like ColumnSelectorFactory, and it has
methods to create analogs of the column selectors you know and love.
- VectorOffset and ReadableVectorOffset are like Offset and ReadableOffset.
- VectorAggregator is like BufferAggregator.
- VectorValueMatcher is like ValueMatcher.
There are some noticeable differences between vectorized and regular
execution:
- Unlike regular cursors, vector cursors do not understand time
granularity. They expect query engines to handle this on their own,
which a new VectorCursorGranularizer class helps with. This is to
avoid too much batch-splitting and to respect the fact that vector
selectors are somewhat more heavyweight than regular selectors.
- Unlike FilteredOffset, FilteredVectorOffset does not leverage indexes
for filters that might partially support them (like an OR of one
filter that supports indexing and another that doesn't). I'm not sure
that this behavior is desirable anyway (it is potentially too eager)
but, at any rate, it'd be better to harmonize it between the two
classes. Potentially they should both do some different thing that
is smarter than what either of them is doing right now.
- When vector cursors are created by QueryableIndexCursorSequenceBuilder,
they use a morphing binary-then-linear search to find their start and
end rows, rather than linear search.
Limitations in this patch are:
- Only timeseries and groupBy have vectorized engines.
- GroupBy doesn't handle multi-value dimensions yet.
- Vector cursors cannot handle virtual columns or descending order.
- Only some filters have vectorized matchers: "selector", "bound", "in",
"like", "regex", "search", "and", "or", and "not".
- Only some aggregators have vectorized implementations: "count",
"doubleSum", "floatSum", "longSum", "hyperUnique", and "filtered".
- Dimension specs other than "default" don't work yet (no extraction
functions or filtered dimension specs).
Currently, the testing strategy includes adding vectorization-enabled
tests to TimeseriesQueryRunnerTest, GroupByQueryRunnerTest,
GroupByTimeseriesQueryRunnerTest, CalciteQueryTest, and all of the
filtering tests that extend BaseFilterTest. In all of those classes,
there are some test cases that don't support vectorization. They are
marked by special function calls like "cannotVectorize" or "skipVectorize"
that tell the test harness to either expect an exception or to skip the
test case.
Testing should be expanded in the future -- a project in and of itself.
Related to #3011.
* WIP
* Adjustments for unused things.
* Adjust javadocs.
* DimensionDictionarySelector adjustments.
* Add "clone" to BatchIteratorAdapter.
* ValueMatcher javadocs.
* Fix benchmark.
* Fixups post-merge.
* Expect exception on testGroupByWithStringVirtualColumn for IncrementalIndex.
* BloomDimFilterSqlTest: Tag two non-vectorizable tests.
* Minor adjustments.
* Update surefire, bump up Xmx in Travis.
* Some more adjustments.
* Javadoc adjustments
* AggregatorAdapters adjustments.
* Additional comments.
* Remove switching search.
* Only missiles.
* Add inline firehose
To allow users to quickly parsing and schema, add a firehose that reads
data that is inlined in its spec.
* Address review comments
* Remove suppression of sonar warnings
* disable all compression in intermediate segment persists while ingestion
* more changes and build fix
* by default retain existing indexingSpec for intermediate persisted segments
* document indexSpecForIntermediatePersists index tuning config
* fix build issues
* update serde tests
* Fix license check in travis and make it optional
* debug
* fix build
* too loud maven
* move MAVEN_OPTS to top and add comments
* adjust script
* remove mvn option from python script
In Single-Server Quickstart tutorial the overlord and coordinator
is started as one process on port 8081. But in delete data tutorial the kill
task is sent to 8090 port, which fails.
* Add round support for DS-HLL
Since the Cardinality aggregator has a "round" option to round off estimated
values generated from the HyperLogLog algorithm, add the same "round" option to
the DataSketches HLL Sketch module aggregators to be consistent.
* Fix checkstyle errors
* Change HllSketchSqlAggregator to do rounding
* Fix test for standard-compliant null handling mode
* more sql support for expression array functions
* prepend/slice
* doc fixes
* fix imports
* fix tests
* add null numeric expr for proper conversions between ExprEval and Expr and back to ExprEval
* re-arrange
* imports :(
* add append/prepend test
* array support for expression language for multi-value string columns
* fix tests?
* fixes
* more tests
* fixes
* cleanup
* more better, more test
* ignore inspection
* license
* license fix
* inspection
* remove dumb import
* more better
* some comments
* add expr rewrite for arrayfn args for more magic, tests
* test stuff
* more tests
* fix test
* fix test
* castfunc can deal with arrays
* needs more empty array
* more tests, make cast to long array more forgiving
* refactor
* simplify ExprMacro Expr implementations with base classes in core
* oops
* more test
* use Shuttle for Parser.flatten, javadoc, cleanup
* fixes and more tests
* unused import
* fixes
* javadocs, cleanup, refactors
* fix imports
* more javadoc
* more javadoc
* more
* more javadocs, nonnullbydefault, minor refactor
* markdown fix
* adjustments
* more doc
* move initial filter out
* docs
* map empty arg lambda, apply function argument validation
* check function args at parse time instead of eval time
* more immutable
* more more immutable
* clarify grammar
* fix docs
* empty array is string test, we need a way to make arrays better maybe in the future, or define empty arrays as other types..
* Add state and error tracking for seekable stream supervisors
* Fixed nits in docs
* Made inner class static and updated spec test with jackson inject
* Review changes
* Remove redundant config param in supervisor
* Style
* Applied some of Jon's recommendations
* Add transience field
* write test
* implement code review changes except for reconsidering logic of markRunFinishedAndEvaluateHealth()
* remove transience reporting and fix SeekableStreamSupervisorStateManager impl
* move call to stateManager.markRunFinished() from RunNotice to runInternal() for tests
* remove stateHistory because it wasn't adding much value, some fixes, and add more tests
* fix tests
* code review changes and add HTTP health check status
* fix test failure
* refactor to split into a generic SupervisorStateManager and a specific SeekableStreamSupervisorStateManager
* fixup after merge
* code review changes - add additional docs
* cleanup KafkaIndexTaskTest
* add additional documentation for Kinesis indexing
* remove unused throws class
* add s3 authentication method informations
* add druid.s3.fileSessionCredentials related content
* remove authentication parameters to avoid confusion as it is more detailed in S3 Deep Storage page
* streamline s3 docs
* SQL: Allow NULLs in place of optional arguments in many functions.
Also adjust SQL docs to describe how to make time literals using
TIME_PARSE (which is now possible in a nicer way).
* Be less forbidden.
* Upgrade various build and doc links to https.
Where it wasn't possible to upgrade build-time dependencies to https,
I kept http in place but used hardcoded checksums or GPG keys to ensure
that artifacts fetched over http are verified properly.
* Switch to https://apache.org.
* update sys.servers table to show all servers
* update docs
* Fix integration test
* modify test query for batch integration test
* fix case in test queries
* make the server_type lowercase
* Apply suggestions from code review
Co-Authored-By: Himanshu <g.himanshu@gmail.com>
* Fix compilation from git suggestion
* fix unit test
* fix lookup editor to use lookup tiers instead of historical tiers
* use default tier if empty response, fix if configured lookups is null
* fixes
* fix typo
* use relative link to build instructions from top level readme
* add textfile to readme
* formatting
* make README.BINARY plaintext, move LABELS.md to LABELS, README.txt to README
* exclude README.BINARY still
* remove jdk links/recommmendations
* add script to use DRUIDVERSION in textfile README instead of latest, add links to recommended jdk to build.md
* license
* better readme template, links to latest if does not detect an apache release version
* fix
* First set of changes for tDigest histogram
* Add license
* Address code review comments
* Add a doc page for new T-Digest sketch aggregators. Minor code cleanup and comments.
* Remove synchronization from BufferAggregators. Address code review comments
* Fix typo
* add postgresql meta db table schema configuration property (#7137)
If the postgresql db schema changes, you must set the configuration
values.
You do not need to set it if there is no change from the default schema
'public'.
druid.metadata.postgres.dbTableSchema=public
* create postgresql metadb table schema configuration property (#7137)
If the postgresql db schema changes, you must set the configuration
values.
You do not need to set it if there is no change from the default schema
'public'.
druid.metadata.postgres.dbTableSchema=public
check PostgreSQLTablesConfig.java
* modify postgresql readme file. - metadb table schema (#7137)
If the postgresql db schema changes, you must set the configuration
values.
You do not need to set it if there is no change from the default schema
'public'.
druid.metadata.postgres.dbTableSchema=public
check PostgreSQLTablesConfig.java
* Remove SQL experimental banner and other doc adjustments.
Also,
- Adjust the ToC and other docs a bit so SQL and native queries are
presented on more equal footing.
- De-emphasize querying historicals and peons directly in the
native query docs. This is a really niche thing and may have been
confusing to include prominently in the very first paragraph.
- Remove DataSketches and Kafka indexing service from the experimental
features ToC. They are not experimental any longer and were there in
error.
* More notes.
* Slight tweak.
* Remove extra extra word.
* Remove RT node from ToC.
* V1 - improve parallelism of zookeeper based segment change processing
* Create zk nodes in batches. Address code review comments.
Introduce various configs.
* Add documentation for the newly added configs
* Fix test failures
* Fix more test failures
* Remove prinstacktrace statements
* Address code review comments
* Use a single queue
* Address code review comments
Since we have a separate load peon for every historical, just having a single SegmentChangeProcessor
task per historical is enough. This commit also gets rid of the associated config druid.coordinator.loadqueuepeon.curator.numCreateThreads
* Resolve merge conflict
* Fix compilation failure
* Remove batching since we already have a dynamic config maxSegmentsInNodeLoadingQueue that provides that control
* Fix NPE in test
* Remove documentation for configs that are no longer needed
* Address code review comments
* Address more code review comments
* Fix checkstyle issue
* Address code review comments
* Code review comments
* Add back monitor node remove executor
* Cleanup code to isolate null checks and minor refactoring
* Change param name since it conflicts with member variable name
This feature allows Calcite's Bindable interpreter to be bolted on
top of Druid queries and table scans. I think it should be removed for
a few reasons:
1. It is not recommended for production anyway, because it generates
unscalable query plans (e.g. it will plan a join into two table scans
and then try to do the entire join in memory on the broker).
2. It doesn't work with Druid-specific SQL functions, like TIME_FLOOR,
REGEXP_EXTRACT, APPROX_COUNT_DISTINCT, etc.
3. It makes the SQL planning code needlessly complicated.
With SQL coming out of experimental status soon, it's a good opportunity
to remove this feature.
* Contributing Moving-Average Query to open source.
* Fix failing code inspections.
* See if explicit types will invoke the correct comparison function.
* Explicitly remove support for druid.generic.useDefaultValueForNull configuration parameter.
* Update styling and headers for complience.
* Refresh code with latest master changes:
* Remove NullDimensionSelector.
* Apply changes of RequestLogger.
* Apply changes of TimelineServerView.
* Small checkstyle fix.
* Checkstyle fixes.
* Fixing rat errors; Teamcity errors.
* Removing support theta sketches. Will be added back in this pr or a following once DI conflicts with datasketches are resolved.
* Implements some of the review fixes.
* Contributing Moving-Average Query to open source.
* Fix failing code inspections.
* See if explicit types will invoke the correct comparison function.
* Explicitly remove support for druid.generic.useDefaultValueForNull configuration parameter.
* Update styling and headers for complience.
* Refresh code with latest master changes:
* Remove NullDimensionSelector.
* Apply changes of RequestLogger.
* Apply changes of TimelineServerView.
* Small checkstyle fix.
* Checkstyle fixes.
* Fixing rat errors; Teamcity errors.
* Removing support theta sketches. Will be added back in this pr or a following once DI conflicts with datasketches are resolved.
* Implements some of the review fixes.
* More fixes for review.
* More fixes from review.
* MapBasedRow is Unmodifiable. Create new rows instead of modifying existing ones.
* Remove more changes related to datasketches support.
* Refactor BaseAverager startFrom field and add a comment.
* fakeEvents field: Refactor initialization and add comment.
* Rename parameters (tiny change).
* Fix variable name typo in test (JAN_4).
* Fix styling of non camelCase fields.
* Fix Preconditions.checkArgument for cycleSize.
* Add more documentation to RowBucketIterable and other classes.
* key/value comment on in MovingAverageIterable.
* Fix anonymous makeColumnValueSelector returning null.
* Replace IdentityYieldingAccumolator with Yielders.each().
* * internalNext() should return null instead of throwing exception.
* Remove unused variables/prarameters.
* Harden MovingAverageIterableTest (Switch anyOf to exact match).
* Change internalNext() from recursion to iteration; Simplify next() and hasNext().
* Remove unused imports.
* Address review comments.
* Rename fakeEvents to emptyEvents.
* Remove redundant parameter key from computeMovingAverage.
* Check yielder as well in RowBucketIterable#hasNext()
* Fix javadoc.
* Add reload by interval API
Implements the reload proposal of #7439
Added tests and updated docs
* PR updates
* Only build timeline with required segments
Use 404 with message when a segmentId is not found
Fix typo in doc
Return number of segments modified.
* Fix checkstyle errors
* Replace String.format with StringUtils.format
* Remove return value
* Expand timeline to segments that overlap for intervals
Restrict update call to only segments that need updating.
* Only add overlapping enabled segments to the timeline
* Some renames for clarity
Added comments
* Don't rely on cached poll data
Only fetch required information from DB
* Match error style
* Merge and cleanup doc
* Fix String.format call
* Add unit tests
* Fix unit tests that check for overshadowing
* Add api to drop data by interval
* update to address comments
* unused imports
* PR comments + add tests in SQLMetadataSegmentManagerTest
* update tests and docs
* Implement round function in druid-sql
* Return value according to the type of argument
* Fix codes for abnoraml inputs, updated math-expr.md
* Fix assert text
* Fix error messages and refactor codes
* Fix compile error, update sql.md, refactor codes and format tests
* Enhnace the HttpFirehose to work with both insecure URIs and URIs requiring basic authentication
* Improve security of enhanced HttpFirehoseFactory by not logging auth credentials
* Fix checkstyle failure in HttpFirehoseFactory.java
* Update docs and fix TeamCity build with required noinspection
* Indentation cleanup and logic modification for HttpFirehose object stream
* Remove default Empty string password provider in http firehose
* Add JavaDoc for MixIn describing its intended use
* Reverting documentation notation for json code to be inline with rest of doc
* Improve instantiation of ObjectMappers that require MixIn for redacting password from task logs
* Add comment to clarify fully qualified references of Objects in SQLMetadataStorageActionHandler
* Update scan query runner factory to accept SpecificSegmentSpec
* nit
* Sorry travis
* Improve logging and fix doc
* Bug fix
* Friendlier error msgs and tests to cover bug
* Address Gian's comments
* Fix doc
* Added tests for empty and null column list
* Style
* Fix checking wrong order (looking at query param when it should be
looking at the null-handled order)
* Add test case for null order
* Fix ScanQueryRunnerTest
* Forbidden APIs fixed
Removes the coordinator sanity check that prevents it from dropping all
segments. It's useful to get rid of this, since the behavior is
unintuitive for dev/testing clusters where users might regularly want
to drop all their data to get back to a clean slate.
But the sanity check was there for a reason: to prevent a race condition
where the coordinator might drop all segments if it ran before the
first metadata store poll finished. This patch addresses that concern
differently, by allowing methods in MetadataSegmentManager to return
null if a poll has not happened yet, and canceling coordinator runs
in that case.
This patch also makes the "dataSources" reference in
SQLMetadataSegmentManager volatile. I'm not sure why it wasn't volatile
before, but it seems necessary to me: it's not final, and it's dereferenced
from multiple threads without synchronization.
* orc extension reworked to use apache orc map-reduce lib, moved to core extensions, support for flattenSpec, tests, docs
* change binary handling to be compatible with avro and parquet, Rows.objectToStrings now converts byte[] to base64, change date handling
* better docs and tests
* fix it
* formatting
* doc fix
* fix it
* exclude redundant dependencies
* use latest orc-mapreduce, add hadoop jobProperties recommendations to docs
* doc fix
* review stuff and fix binaryAsString
* cache for root level fields
* more better
* Make IngestSegmentFirehoseFactory splittable for parallel ingestion
* Code review feedback
- Get rid of WindowedSegment
- Don't document 'segments' parameter or support splitting firehoses that use it
- Require 'intervals' in WindowedSegmentId (since it won't be written by hand)
* Add missing @JsonProperty
* Integration test passes
* Add unit test
* Remove two FIXME comments from CompactionTask
I'd like to leave this PR in a potentially mergeable state, but I still would
appreciate reviewer eyes on the questions I'm removing here.
* Updates from code review
* Update init
Fix bin/init to source from proper directory.
* Fix for Proposal #6518: Shutdown druid processes upon complete loss of ZK connectivity
* Zookeeper Loss:
- Add feature documentation
- Cosmetic refactors
- Variable extractions
- Remove getter
* - Change config key name and reword documentation
- Switch from Function<Void,Void> to Runnable/Lambda
- try { … } finally { … }
* Fix line length too long
* - change to formatted string for logging
- use System.err.println after lifecycle stops
* commenting on makeEnsembleProvider()-created Zookeeper termination
* Add javadoc
* added java doc reference back to apache discussion thread.
* move comment to other class
* favor two-slash comments instead of multiline comments
* Moved Scan Builder to Druids class and started on Scan Benchmark setup
* Need to form queries
* It runs.
* Stuff for time-ordered scan query
* Move ScanResultValue timestamp comparator to a separate class for testing
* Licensing stuff
* Change benchmark
* Remove todos
* Added TimestampComparator tests
* Change number of benchmark iterations
* Added time ordering to the scan benchmark
* Changed benchmark params
* More param changes
* Benchmark param change
* Made Jon's changes and removed TODOs
* Broke some long lines into two lines
* nit
* Decrease segment size for less memory usage
* Wrote tests for heapsort scan result values and fixed bug where iterator
wasn't returning elements in correct order
* Wrote more tests for scan result value sort
* Committing a param change to kick teamcity
* Fixed codestyle and forbidden API errors
* .
* Improved conciseness
* nit
* Created an error message for when someone tries to time order a result
set > threshold limit
* Set to spaces over tabs
* Fixing tests WIP
* Fixed failing calcite tests
* Kicking travis with change to benchmark param
* added all query types to scan benchmark
* Fixed benchmark queries
* Renamed sort function
* Added javadoc on ScanResultValueTimestampComparator
* Unused import
* Added more javadoc
* improved doc
* Removed unused import to satisfy PMD check
* Small changes
* Changes based on Gian's comments
* Fixed failing test due to null resultFormat
* Added config and get # of segments
* Set up time ordering strategy decision tree
* Refactor and pQueue works
* Cleanup
* Ordering is correct on n-way merge -> still need to batch events into
ScanResultValues
* WIP
* Sequence stuff is so dirty :(
* Fixed bug introduced by replacing deque with list
* Wrote docs
* Multi-historical setup works
* WIP
* Change so batching only occurs on broker for time-ordered scans
Restricted batching to broker for time-ordered queries and adjusted
tests
Formatting
Cleanup
* Fixed mistakes in merge
* Fixed failing tests
* Reset config
* Wrote tests and added Javadoc
* Nit-change on javadoc
* Checkstyle fix
* Improved test and appeased TeamCity
* Sorry, checkstyle
* Applied Jon's recommended changes
* Checkstyle fix
* Optimization
* Fixed tests
* Updated error message
* Added error message for UOE
* Renaming
* Finish rename
* Smarter limiting for pQueue method
* Optimized n-way merge strategy
* Rename segment limit -> segment partitions limit
* Added a bit of docs
* More comments
* Fix checkstyle and test
* Nit comment
* Fixed failing tests -> allow usage of all types of segment spec
* Fixed failing tests -> allow usage of all types of segment spec
* Revert "Fixed failing tests -> allow usage of all types of segment spec"
This reverts commit ec470288c7.
* Revert "Merge branch '6088-Time-Ordering-On-Scans-N-Way-Merge' of github.com:justinborromeo/incubator-druid into 6088-Time-Ordering-On-Scans-N-Way-Merge"
This reverts commit 57033f36df, reversing
changes made to 8f01d8dd16.
* Check type of segment spec before using for time ordering
* Fix bug in numRowsScanned
* Fix bug messing up count of rows
* Fix docs and flipped boolean in ScanQueryLimitRowIterator
* Refactor n-way merge
* Added test for n-way merge
* Refixed regression
* Checkstyle and doc update
* Modified sequence limit to accept longs and added test for long limits
* doc fix
* Implemented Clint's recommendations
* Move GCP to a core extension
* Don't provide druid-core >.<
* Keep AWS and GCP modules separate
* Move AWSModule to its own module
* Add aws ec2 extension and more modules in more places
* Fix bad imports
* Fix test jackson module
* Include AWS and GCP core in server
* Add simple empty method comment
* Update version to 15
* One more 0.13.0-->0.15.0 change
* Fix multi-binding problem
* Grep for s3-extensions and update docs
* Update extensions.md
Follow-up to #7223 that fixes a doc bug (a result-level cache property
was misspelled), changes the recommended "small cluster" threshold from
20 to 5 servers, and clarifies behavior of the various caching options.
* Reduce # of max subTasks to 2
* fix typo and add more doc
* add more doc and link
* change default and add warning
* fix doc
* add test
* fix it test
#### `EventReceiverFirehoseFactory`
Fixed several concurrency bugs in `EventReceiverFirehoseFactory`:
- Race condition over putting an entry into `producerSequences` in `checkProducerSequence()`.
- `Stopwatch` used to measure time across threads, but it's a non-thread-safe class.
- Use `System.nanoTime()` instead of `System.currentTimeMillis()` because the latter are [not suitable](https://stackoverflow.com/a/351571/648955) for measuring time intervals.
- `close()` was not synchronized by could be called from multiple threads concurrently.
Removed unnecessary `readLock` (protecting `hasMore()` and `nextRow()` which are always called from a single thread). Removed unnecessary `volatile` modifiers.
Documented threading model and concurrent control flow of `EventReceiverFirehose` instances.
**Important:** please read the updated Javadoc for `EventReceiverFirehose.addAll()`. It allows events from different requests (batches) to be interleaved in the buffer. Is this OK?
#### `TimedShutoffFirehoseFactory`
- Fixed a race condition that was possible because `close()` that was not properly synchronized.
Documented threading model and concurrent control flow of `TimedShutoffFirehose` instances.
#### `Firehose`
Refined concurrency contract of `Firehose` based on `EventReceiverFirehose` implementation. Importantly, now it states that `close()` doesn't affect `hasMore()` and `nextRow()` and could be called concurrently with them. In other words, specified that `close()` is for "row supply" side rather than "row consume" side. However, I didn't check that other `Firehose` implementatations adhere to this contract.
<hr>
This issue is the result of reviewing `EventReceiverFirehose` and `TimedShutoffFirehose` using [this checklist](https://medium.com/@leventov/code-review-checklist-java-concurrency-49398c326154).
* Remove DataSegmentFinder, InsertSegmentToDb, and descriptor.json file
* delete descriptor.file when killing segments
* fix test
* Add doc for ha
* improve warning
* index_parallel: support !appendToExisting with no explicit intervals
This enables ParallelIndexSupervisorTask to dynamically request locks at runtime
if it is run without explicit intervals in the granularity spec and with
appendToExisting set to false. Previously, it behaved as if appendToExisting
was set to true, which was undocumented and inconsistent with IndexTask and
Hadoop indexing.
Also, when ParallelIndexSupervisorTask allocates segments in the explicit
interval case, fail if its locks on the interval have been revoked.
Also make a few other additions/clarifications to native ingestion docs.
Fixes#6989.
* Review feedback.
PR description on GitHub updated to match.
* Make native batch ingestion partitions start at 0
* Fix to previous commit
* Unit test. Verified to fail without the other commits on this branch.
* Another round of review
* Slightly scarier warning
* document middle manager api
* re-arrange
* correction
* document more missing overlord api calls, minor re-arrange of some code i was referencing
* fix it
* this will fix it
* fixup
* link to other docs
* Support kafka transactional topics
* update kafka to version 2.0.0
* Remove the skipOffsetGaps option since it's not used anymore
* Adjust kafka consumer to use transactional semantics
* Update tests
* Remove unused import from test
* Fix compilation
* Invoke transaction api to fix a unit test
* temporary modification of travis.yml for debugging
* another attempt to get travis tasklogs
* update kafka to 2.0.1 at all places
* Remove druid-kafka-eight dependency from integration-tests, remove the kafka firehose test and deprecate kafka-eight classes
* Add deprecated in docs for kafka-eight and kafka-simple extensions
* Remove skipOffsetGaps and code changes for transaction support
* Fix indentation
* remove skipOffsetGaps from kinesis
* Add transaction api to KafkaRecordSupplierTest
* Fix indent
* Fix test
* update kafka version to 2.1.0
* maintenance mode for Historical
forbidden api fix, config deserialization fix
logging fix, unit tests
* addressed comments
* addressed comments
* a style fix
* addressed comments
* a unit-test fix due to recent code-refactoring
* docs & refactoring
* addressed comments
* addressed a LoadRule drop flaw
* post merge cleaning up
* Add published segment cache in broker
* Change the DataSegment interner so it's not based on DataSEgment's equals only and size is preserved if set
* Added a trueEquals to DataSegment class
* Use separate interner for realtime and historical segments
* Remove trueEquals as it's not used anymore, change log message
* PR comments
* PR comments
* Fix tests
* PR comments
* Few more modification to
* change the coordinator api
* removeall segments at once from MetadataSegmentView in order to serve a more consistent view of published segments
* Change the poll behaviour to avoid multiple poll execution at same time
* minor changes
* PR comments
* PR comments
* Make the segment cache in broker off by default
* Added a config to PlannerConfig
* Moved MetadataSegmentView to sql module
* Add doc for new planner config
* Update documentation
* PR comments
* some more changes
* PR comments
* fix test
* remove unintentional change, whether to synchronize on lifecycleLock is still in discussion in PR
* minor changes
* some changes to initialization
* use pollPeriodInMS
* Add boolean cachePopulated to check if first poll succeeds
* Remove poll from start()
* take the log message out of condition in stop()
* blooming aggs
* partially address review
* fix docs
* minor test refactor after rebase
* use copied bloomkfilter
* add ByteBuffer methods to BloomKFilter to allow agg to use in place, simplify some things, more tests
* add methods to BloomKFilter to get number of set bits, use in comparator, fixes
* more docs
* fix
* fix style
* simplify bloomfilter bytebuffer merge, change methods to allow passing buffer offsets
* oof, more fixes
* more sane docs example
* fix it
* do the right thing in the right place
* formatting
* fix
* avoid conflict
* typo fixes, faster comparator, docs for comparator behavior
* unused imports
* use buffer comparator instead of deserializing
* striped readwrite lock for buffer agg, null handling comparator, other review changes
* style fixes
* style
* remove sync for now
* oops
* consistency
* inspect runtime shape of selector instead of selector plus, static comparator, add inner exception on serde exception
* CardinalityBufferAggregator inspect selectors instead of selectorPluses
* fix style
* refactor away from using ColumnSelectorPlus and ColumnSelectorStrategyFactory to instead use specialized aggregators for each supported column type, other review comments
* adjustment
* fix teamcity error?
* rename nil aggs to empty, change empty agg constructor signature, add comments
* use stringutils base64 stuff to be chill with master
* add aggregate combiner, comment
* add "bloom_filter_test" druid expression to support bloom filters in ExpressionVirtualColumn and ExpressionDimFilter and sql expressions
* more docs
* use java.util.Base64, doc fixes
* use SqlLifecyle to manage sql execution, add sqlId
* add sql request logger
* fix UT
* rename sqlId to sqlQueryId, sql/time to sqlQuery/time, etc
* add docs and more sql request logger impls
* add UT for http and jdbc
* fix forbidden use of com.google.common.base.Charsets
* fix UT in QuantileSqlAggregatorTest, supressed unused warning of getSqlQueryId
* do not use default method in QueryMetrics interface
* capitalize 'sql' everywhere in the non-property parts of the docs
* use RequestLogger interface to log sql query
* minor bugfixes and add switching request logger
* add filePattern configs for FileRequestLogger
* address review comments, adjust sql request log format
* fix inspection error
* try SuppressWarnings("RedundantThrows") to fix inspection error on ComposingRequestLoggerProvider
PR #6605 added support to the statsd emitter for DogStatsD tags. This commit
lets you specify "constant tags" in the config file which are included with
every event. This is helpful if you are running in an environment where you
cannot configure your datadog-agent with tags like "cluster name" --- eg, a
Kubernetes cluster with a datadog-agent on each node and different Druid
deployments in different namespaces but sharing the same datadog-agent
daemonset.
Also fix the name of an existing boolean getter to start with 'is'.
* created seekablestream classes
* created seekablestreamsupervisor class
* first attempt to integrate kafa indexing service to use SeekableStream
* seekablestream bug fixes
* kafkarecordsupplier
* integrated kafka indexing service with seekablestream
* implemented resume/suspend and refactored some package names
* moved kinesis indexing service into core druid extensions
* merged some changes from kafka supervisor race condition
* integrated kinesis-indexing-service with seekablestream
* unite tests for kinesis-indexing-service
* various bug fixes for kinesis-indexing-service
* refactored kinesisindexingtask
* finished up more kinesis unit tests
* more bug fixes for kinesis-indexing-service
* finsihed refactoring kinesis unit tests
* removed KinesisParititons and KafkaPartitions to use SeekableStreamPartitions
* kinesis-indexing-service code cleanup and docs
* merge #6291
merge #6337
merge #6383
* added more docs and reordered methods
* fixd kinesis tests after merging master and added docs in seekablestream
* fix various things from pr comment
* improve recordsupplier and add unit tests
* migrated to aws-java-sdk-kinesis
* merge changes from master
* fix pom files and forbiddenapi checks
* checkpoint JavaType bug fix
* fix pom and stuff
* disable checkpointing in kinesis
* fix kinesis sequence number null in closed shard
* merge changes from master
* fixes for kinesis tasks
* capitalized <partitionType, sequenceType>
* removed abstract class loggers
* conform to guava api restrictions
* add docker for travis other modules test
* address comments
* improve RecordSupplier to supply records in batch
* fix strict compile issue
* add test scope for localstack dependency
* kinesis indexing task refactoring
* comments
* github comments
* minor fix
* removed unneeded readme
* fix deserialization bug
* fix various bugs
* KinesisRecordSupplier unable to catch up to earliest position in stream bug fix
* minor changes to kinesis
* implement deaggregate for kinesis
* Merge remote-tracking branch 'upstream/master' into seekablestream
* fix kinesis offset discrepancy with kafka
* kinesis record supplier disable getPosition
* pr comments
* mock for kinesis tests and remove docker dependency for unit tests
* PR comments
* avg lag in kafkasupervisor #6587
* refacotred SequenceMetadata in taskRunners
* small fix
* more small fix
* recordsupplier resource leak
* revert .travis.yml formatting
* fix style
* kinesis docs
* doc part2
* more docs
* comments
* comments*2
* revert string replace changes
* comments
* teamcity
* comments part 1
* comments part 2
* comments part 3
* merge #6754
* fix injection binding
* comments
* KinesisRegion refactor
* comments part idk lol
* can't think of a commit msg anymore
* remove possiblyResetDataSourceMetadata() for IncrementalPublishingTaskRunner
* commmmmmmmmmments
* extra error handling in KinesisRecordSupplier getRecords
* comments
* quickfix
* typo
* oof
* Broker: Await initialization before finishing startup.
In particular, hold off on announcing the service and starting the
HTTP server until the server view and SQL metadata cache are finished
initializing. This closes a window of time where a Broker could return
partial results shortly after startup.
As part of this, some simplification of server-lifecycle service
announcements. This helps ensure that the two different kinds of
announcements we do (legacy and new-style) stay in sync.
* Remove unused imports.
* Fix NPE in ServerRunnable.
* FilteredRequestLogger: Fix start/stop, invalid delegate behavior.
Fixes two bugs:
1) FilteredRequestLogger did not start/stop the delegate.
2) FilteredRequestLogger would ignore an invalid delegate type, and
instead silently substitute the "noop" logger. This was due to a larger
problem with RequestLoggerProvider setup in general; the fix here is
to remove "defaultImpl" from the RequestLoggerProvider interface, and
instead have JsonConfigurator be responsible for creating the
default implementations. It is stricter about things than the old system
was, and is only willing to make a noop logger if it doesn't see any
request logger configs. Otherwise, it'll raise a provision error.
* Remove unneeded annotations.
The documentation for Bound filter's lowerStrict/upperStrict is incorrect. It is not consistent with the examples provided and actual behaviour of the bound filter. Correct this.
* autosize processing buffers based on direct memory sizing
* remove oops, more test
* max 1gb autosize buffers, test, start of docs
* fix oops
* revert accidental change
* print buffer size in exception
* change the things
* Replace StatsD client library
The [Datadog package][1] is a StatsD compatible drop-in replacement for the
client library, but it seems to be [better maintained][2] and has support for
Datadog DogStatsD specific features, which will be made use of in a subsequent
commit.
The `count`, `time`, and `gauge` methods are actually exactly compatible with
the previous library and the modifications shouldn't be required, but EasyMock
seems to have a hard time dealing with the variable arguments added by the
DogStatsD library and causes tests to fail if no arguments are provided for the
last String vararg. Passing an empty array fixes the test failures.
[1]: https://github.com/DataDog/java-dogstatsd-client
[2]: https://github.com/tim-group/java-statsd-client/issues/37#issuecomment-248698856
* Retain dimension key information for StatsD metrics
This doesn't change behavior, but allows separating dimensions from the metric
name in subsequent commits.
There is a possible order change for values from
`dimsBuilder.build().values()`, but from the tests it looks like it doesn't
affect actual behavior and the order of user dimensions is also retained.
* Support DogStatsD style tags in statsd-emitter
Datadog [doesn't support name-encoded dimensions and uses a concept of _tags_
instead.][1] This change allows Datadog users to send the metrics without
having to encode the various dimensions in the metric names. This enables
building graphs and monitors with and without aggregation across various
dimensions from the same data.
As tests in this commit verify, the behavior remains the same for users who
don't enable the `druid.emitter.statsd.dogstatsd` configuration flag.
[1]: https://www.datadoghq.com/blog/the-power-of-tagged-metrics/#tags-decouple-collection-and-reporting
* Disable convertRange behavior for DogStatsD users
DogStatsD, unlike regular StatsD, supports floating-point values, so this
behavior is unnecessary. It would be possible to still support `convertRange`,
even with `dogstatsd` enabled, but that would mean that people using the
default mapping would have some of the gauges unnecessarily converted.
`time` is in milliseconds and doesn't support floating-point values.
Also add a "fromIndex" argument to the strpos expression function. There
are some -1 and +1 adjustment terms due to the fact that the strpos
expression behaves like Java indexOf (0-indexed), but the POSITION SQL
function is 1-indexed.
* move parquet-extensions from contrib to core, adds new hadoop parquet parser that does not convert to avro first and supports flattenSpec and int96 columns, add support for flattenSpec for parquet-avro conversion parser, much test with a bunch of files lifted from spark-sql
* fix avro flattener to support nullable primitives for auto discovery and now only supports primitive arrays instead of all arrays
* remove leftover print
* convert micro timestamp to millis
* checkstyle
* add ignore for .parquet and .parq to rat exclude
* fix legit test failure from avro flattern behavior change
* fix rebase
* add exclusions to pom to cut down on redundant jars
* refactor tests, add support for unwrapping lists for parquet-avro, review comments
* more comment
* fix oops
* tweak parquet-avro list handling
* more docs
* fix style
* grr styles
* Period load/drop/broadcast rules should include the future by default
* address comments
* adjust coordinator console and tweak docs
* address comments
* fix travis-ci
* include mysql-metadata-storage extension in distribution, but without the GPL-licensed connector library
* Install mysql connector package
* use symlinks to avoid versioning issues
* add documentation for fetching the mysql connector
* add PrefixFilteredDimensionSpec for multi-value dimensions
* add docs for PrefixFilteredDimensionSpec
* remove unnecessary null handling
* add null check to the result of NullHandling
* o- Query Response format to be based on http 'accept' header & Query Payload contenty type to be based on 'content-type' header
* o- Query Response format to be based on http 'accept' header & Query Payload contenty type to be based on 'content-type' header
o- if Accept header is absent, it defaults to Content-Type header
* Feature: Query Response format to be based on http 'accept' header & Query Payload content type to be based on 'content-type' PR #4033
Minor change to a comment - restoring to previous wording
* Feature: Query Response format to be based on http 'accept' header & Query Payload content type to be based on 'content-type' PR #4033
o- minor change to check for empty string
* Added SystemSchema with following tables (#5989)
* SEGMENTS table provides details on served and published segments
* SERVERS table provides details on data servers
* SERVERSEGMETS table is the JOIN of SEGMENTS and SERVERS
* TASKS table provides details on tasks
* Add documentation for system schema
* Fix static-analysis warnings
* Address PR comments
*Add unit tests
* Fix a test
* Try to fix a test
* Fix a bug around replica count
* rename io.druid to org.apache.druid
* Major change is to make tasks and segment queries streaming
* Made tasks/segments stream to calcite instead of storing it in memory
* Add num_rows to segments table
* Refactor JsonParserIterator
* Replace with closeable iterator
* Fix docs, make num_rows column nullable, some unit test changes
* make num_rows column type long, allow it to be null
fix a compile error after merge, add TrafficCop param to InputStreamResponseHandler
* Filter null rows for segments table from Linq4j enumerable
* change num_replicas datatype to long in segments table
* Fix some tests and address comments
* Doc updates, other PR comments
* Update tests
* Address comments
* Add auth check
* Update docs
* Refactoring
* Fix teamcity warning, change the getQueryableServer in TimelineServerView
* Fix compilation after rebase
* Use the stream API from AuthorizationUtils
* Added LeaderClient interface and NoopDruidLeaderClient class
* Revert "Added LeaderClient interface and NoopDruidLeaderClient class"
This reverts commit 100fa46e39.
* Make the naming consistent to server_segments for the join table
* Add ForbiddenException on auth check failure
* Remove static block from SystemSchema
* Try to fix a test in CalciteQueryTest due to rename of server_segments
* Fix the json output format in the coordinator API
* Add auth check in the segments API
* Add null check to avoid NPE
* Use annonymous class object instead of mock for DruidLeaderClient in SqlBenchmark
* Fix test failures, type long/BIGINT can be nullable
* Revert long nullability to fix tests
* Fix style for tests
* PR comments
* Address PR comments
* Add the missing BytesAccumulatingResponseHandler class
* Use Sequences.withBaggage in DruidPlanner
* Fix docs, add comments
* Close the iterator if hasNext returns false
* fix opentsdb emitter always be running
* check if emitter started
* add more details about consumeDelay in doc
* fix possible thread unsafe
* fix fail sending tags whose value contain colon
* 'suspend' and 'resume' support for kafka indexing service
changes:
* introduces `SuspendableSupervisorSpec` interface to describe supervisors which support suspend/resume functionality controlled through the `SupervisorManager`, which will gracefully shutdown the supervisor and it's tasks, update it's `SupervisorSpec` with either a suspended or running state, and update with the toggled spec. Spec updates are provided by `SuspendableSupervisorSpec.createSuspendedSpec` and `SuspendableSupervisorSpec.createRunningSpec` respectively.
* `KafkaSupervisorSpec` extends `SuspendableSupervisorSpec` and now supports suspend/resume functionality. The difference in behavior between 'running' and 'suspended' state is whether the supervisor will attempt to ensure that indexing tasks are or are not running respectively. Behavior is identical otherwise.
* `SupervisorResource` now provides `/druid/indexer/v1/supervisor/{id}/suspend` and `/druid/indexer/v1/supervisor/{id}/resume` which are used to suspend/resume suspendable supervisors
* Deprecated `/druid/indexer/v1/supervisor/{id}/shutdown` and moved it's functionality to `/druid/indexer/v1/supervisor/{id}/terminate` since 'shutdown' is ambiguous verbage for something that effectively stops a supervisor forever
* Added ability to get all supervisor specs from `/druid/indexer/v1/supervisor` by supplying the 'full' query parameter `/druid/indexer/v1/supervisor?full` which will return a list of json objects of the form `{"id":<id>, "spec":<SupervisorSpec>}`
* Updated overlord console ui to enable suspend/resume, and changed 'shutdown' to 'terminate'
* move overlord console status to own column in supervisor table so does not look like garbage
* spacing
* padding
* other kind of spacing
* fix rebase fail
* fix more better
* all supervisors now suspendable, updated materialized view supervisor to support suspend, more tests
* fix log
* Broker backpressure.
Adds a new property "druid.broker.http.maxQueuedBytes" and a new context
parameter "maxQueuedBytes". Both represent a maximum number of bytes queued
per query before exerting backpressure on the channel to the data server.
Fixes#4933.
* Fix query context doc.
* resolves#5898 by adding maxTotalRows to incremental publishing kafka index task and appenderator based realtime indexing task, as available in IndexTask
* address review comments
* changes due to review
* merge fail
* Rename io.druid to org.apache.druid.
* Fix META-INF files and remove some benchmark results.
* MonitorsConfig update for metrics package migration.
* Reorder some dimensions in inner queries for some reason.
* Fix protobuf tests.
* add subtotalsSpec attribute to groupBy query
* dont sent subtotalsSpec to downstream nodes from broker and other updates
* address review comment
* fix checkstyle issues after merge to master
* add docs for subtotalsSpec feature
* address doc review comments
* SQL: Support more result formats, add columns header.
- Add result formats for line-based JSON and CSV.
- Add X-Druid-Sql-Columns header with a list of all columns that
the response will contain.
- Add more comprehensive documentation on what callers should expect
when making Druid SQL queries.
* Fix some tests.
* Adjust tests.
* Adjust trailer, add types header.
* Fix trailers.
* Add PostgreSQLConnectorConfig to expose SSL configuration options for the Postgres Metadata Storage module.
* Fix checkstyle violations and add license header
* Convert properties in the postgres docs to be the full property path and fix typo
* Fix grammar in sslFactory docs
* 'shutdownAllTasks' API for a dataSource
Change-Id: I30d14390457d39e0427d23a48f4f224223dc5777
* fix api path and return
Change-Id: Ib463f31ee2c4cb168cf2697f149be845b57c42e5
* optimize implementation
Change-Id: I50a8dcd44dd9d36c9ecbfa78e103eb9bff32eab9
* Cache: Add maxEntrySize config.
The idea is this makes it more feasible to cache query types that
can potentially generate large result sets, like groupBy and select,
without fear of writing too much to the cache per query.
Includes a refactor of cache population code in CachingQueryRunner and
CachingClusteredClient, such that they now use the same CachePopulator
interface with two implementations: one for foreground and one for
background.
The main reason for splitting the foreground / background impls is
that the foreground impl can have a more effective implementation of
maxEntrySize. It can stop retaining subvalues for the cache early.
* Add CachePopulatorStats.
* Fix whitespace.
* Fix docs.
* Fix various tests.
* Add tests.
* Fix tests.
* Better tests
* Remove conflict markers.
* Fix licenses.
* Native parallel indexing without shuffle
* fix build
* fix ci
* fix ingestion without intervals
* fix retry
* fix retry
* add it test
* use chat handler
* fix build
* add docs
* fix ITUnionQueryTest
* fix failures
* disable metrics reporting
* working
* Fix split of static-s3 firehose
* Add endpoints to supervisor task and a unit test for endpoints
* increase timeout in test
* Added doc
* Address comments
* Fix overlapping locks
* address comments
* Fix static s3 firehose
* Fix test
* fix build
* fix test
* fix typo in docs
* add missing maxBytesInMemory to doc
* address comments
* fix race in test
* fix test
* Rename to ParallelIndexSupervisorTask
* fix teamcity
* address comments
* Fix license
* addressing comments
* addressing comments
* indexTaskClient-based segmentAllocator instead of CountingActionBasedSegmentAllocator
* Fix race in TaskMonitor and move HTTP endpoints to supervisorTask from runner
* Add more javadocs
* use StringUtils.nonStrictFormat for logging
* fix typo and remove unused class
* fix tests
* change package
* fix strict build
* tmp
* Fix overlord api according to the recent change in master
* Fix it test
* Add lastString and firstString aggregators extension
* Remove duplicated class
* Move first-last-string doc page to extensions-contrib
* Fix ObjectStrategy compare method
* Fix doc bad aggregatos type name
* Create FoldingAggregatorFactory classes to fix SegmentMetadataQuery
* Add getMaxStringBytes() method to support JSON serialization
* Fix null pointer exception at segment creation phase when the string value is null
* Control the valueSelector object class on BufferAggregators
* Perform all improvements
* Add java doc on SerializablePairLongStringSerde
* Refactor ObjectStraty compare method
* Remove unused ;
* Add aggregateCombiner unit tests. Rename BufferAggregators unit tests
* Remove unused imports
* Add license header
* Add class name to java doc class serde
* Throw exception if value is unsupported class type
* Move first-last-string extension into druid core
* Update druid core docs
* Fix null pointer exception when pair->string is null
* Add null control unit tests
* Remove unused imports
* Add first/last string folding aggregator on AggregatorsModule to support segment metadata query
* Change SerializablePairLongString to extend SerializablePair
* Change vars from public to private
* Convert vars to primitive type
* Clarify compare comment
* Change IllegalStateException to ISE
* Remove TODO comments
* Control possible null pointer exception
* Add @Nullable annotation
* Remove empty line
* Remove unused parameter type
* Improve AggregatorCombiner javadocs
* Add filterNullValues option at StringLast and StringFirst aggregators
* Add filterNullValues option at agg documentation
* Fix checkstyle
* Update header license
* Fix StringFirstAggregatorFactory.VALUE_COMPARATOR
* Fix StringFirstAggregatorCombiner
* Fix if condition at StringFirstAggregateCombiner
* Remove filterNullValues from string first/last aggregators
* Add isReset flag in FirstAggregatorCombiner
* Change Arrays.asList to Collections.singletonList
- Setting druid.request.logging.delegate has no effect.
- The provider is injected based on a type parameter & this looks to be scoped to delegate for filtered loggers
* implement materialized view
* modify code according to jihoonson's comments
* modify code according to jihoonson's comments - 2
* add documentation about materialized view
* use new HadoopTuningConfig in pr 5583
* add minDataLag and fix optimizer bug
* correct value of DEFAULT_MIN_DATA_LAG_MS
* modify code according to jihoonson's comments - 3
* use the boolean expression instead of if-else
* Anonymous authenticator that authenticates all requests and then directs them to an authorizer.
* Adding documentation
* Removed some fields from class AnonymousAuthenticator
* Updating docs
* fix freeSpacePercent in segmentCache.locations
* the check should probably test the other way around
* documentation should put the option in the right place
* examples have a superfluous backslash
* add test to verify correct behavior
* switch to Path and test with jimfs
Path allows to use different filesystems.
Jimfs provides an actual (in memory) filesystem.
This also allows more complex test scenarios.
The behavior should be unchanged by this commit.
* Revert "switch to Path and test with jimfs"
This reverts commit 8b9a418d65.
* add default caffeine cache size based on runtime Xmx or max 1GB
* update docs for caffeine cache
* fix formatting
* test caffeine size should never be less than 0
* set caffeine max default size to 1G not 1M
* fix caffeine cache tests
* This commit introduces a new tuning config called 'maxBytesInMemory' for ingestion tasks
Currently a config called 'maxRowsInMemory' is present which affects how much memory gets
used for indexing.If this value is not optimal for your JVM heap size, it could lead
to OutOfMemoryError sometimes. A lower value will lead to frequent persists which might
be bad for query performance and a higher value will limit number of persists but require
more jvm heap space and could lead to OOM.
'maxBytesInMemory' is an attempt to solve this problem. It limits the total number of bytes
kept in memory before persisting.
* The default value is 1/3(Runtime.maxMemory())
* To maintain the current behaviour set 'maxBytesInMemory' to -1
* If both 'maxRowsInMemory' and 'maxBytesInMemory' are present, both of them
will be respected i.e. the first one to go above threshold will trigger persist
* Fix check style and remove a comment
* Add overlord unsecured paths to coordinator when using combined service (#5579)
* Add overlord unsecured paths to coordinator when using combined service
* PR comment
* More error reporting and stats for ingestion tasks (#5418)
* Add more indexing task status and error reporting
* PR comments, add support in AppenderatorDriverRealtimeIndexTask
* Use TaskReport instead of metrics/context
* Fix tests
* Use TaskReport uploads
* Refactor fire department metrics retrieval
* Refactor input row serde in hadoop task
* Refactor hadoop task loader names
* Truncate error message in TaskStatus, add errorMsg to task report
* PR comments
* Allow getDomain to return disjointed intervals (#5570)
* Allow getDomain to return disjointed intervals
* Indentation issues
* Adding feature thetaSketchConstant to do some set operation in PostAgg (#5551)
* Adding feature thetaSketchConstant to do some set operation in PostAggregator
* Updated review comments for PR #5551 - Adding thetaSketchConstant
* Fixed CI build issue
* Updated review comments 2 for PR #5551 - Adding thetaSketchConstant
* Fix taskDuration docs for KafkaIndexingService (#5572)
* With incremental handoff the changed line is no longer true.
* Add doc for automatic pendingSegments (#5565)
* Add missing doc for automatic pendingSegments
* address comments
* Fix indexTask to respect forceExtendableShardSpecs (#5509)
* Fix indexTask to respect forceExtendableShardSpecs
* add comments
* Deprecate spark2 profile in pom.xml (#5581)
Deprecated due to https://github.com/druid-io/druid/pull/5382
* CompressionUtils: Add support for decompressing xz, bz2, zip. (#5586)
Also switch various firehoses to the new method.
Fixes#5585.
* This commit introduces a new tuning config called 'maxBytesInMemory' for ingestion tasks
Currently a config called 'maxRowsInMemory' is present which affects how much memory gets
used for indexing.If this value is not optimal for your JVM heap size, it could lead
to OutOfMemoryError sometimes. A lower value will lead to frequent persists which might
be bad for query performance and a higher value will limit number of persists but require
more jvm heap space and could lead to OOM.
'maxBytesInMemory' is an attempt to solve this problem. It limits the total number of bytes
kept in memory before persisting.
* The default value is 1/3(Runtime.maxMemory())
* To maintain the current behaviour set 'maxBytesInMemory' to -1
* If both 'maxRowsInMemory' and 'maxBytesInMemory' are present, both of them
will be respected i.e. the first one to go above threshold will trigger persist
* Address code review comments
* Fix the coding style according to druid conventions
* Add more javadocs
* Rename some variables/methods
* Other minor issues
* Address more code review comments
* Some refactoring to put defaults in IndexTaskUtils
* Added check for maxBytesInMemory in AppenderatorImpl
* Decrement bytes in abandonSegment
* Test unit test for multiple sinks in single appenderator
* Fix some merge conflicts after rebase
* Fix some style checks
* Merge conflicts
* Fix failing tests
Add back check for 0 maxBytesInMemory in OnHeapIncrementalIndex
* Address PR comments
* Put defaults for maxRows and maxBytes in TuningConfig
* Change/add javadocs
* Refactoring and renaming some variables/methods
* Fix TeamCity inspection warnings
* Added maxBytesInMemory config to HadoopTuningConfig
* Updated the docs and examples
* Added maxBytesInMemory config in docs
* Removed references to maxRowsInMemory under tuningConfig in examples
* Set maxBytesInMemory to 0 until used
Set the maxBytesInMemory to 0 if user does not set it as part of tuningConfing
and set to part of max jvm memory when ingestion task starts
* Update toString in KafkaSupervisorTuningConfig
* Use correct maxBytesInMemory value in AppenderatorImpl
* Update DEFAULT_MAX_BYTES_IN_MEMORY to 1/6 max jvm memory
Experimenting with various defaults, 1/3 jvm memory causes OOM
* Update docs to correct maxBytesInMemory default value
* Minor to rename and add comment
* Add more details in docs
* Address new PR comments
* Address PR comments
* Fix spelling typo
* Update defaultHadoopCoordinates in documentation.
To match changes applied in #5382.
* Remove a parameter with defaults from example configuration file.
If it has reasonable defaults, then why would it be in an example config file?
Also, it is yet another place that has been forgotten to be updated and will be forgotten in the future.
Also, if someone is running different hadoop version, then there's much more work to be done than just changing this property, so why give users false hopes?
* Fix typo in documentation.
* Add task action metrics, add taskId metric dimension.
Adds two new metrics: task/action/log/time and task/action/run/time. Also
adds taskId as a dimension, to give us the ability to drill down into metrics
for an individual task. Also standardizes metrics-attachment using two helper
methods in IndexTaskUtils.
* Fix typo
* Use mergeBuffer instead of processingBuffer in parallelCombiner
* Fix test
* address comments
* fix test
* Fix test
* Update comment
* address comments
* fix build
* Fix test failure
* Add config to allow setting up custom unsecured paths for druid nodes.
* return all resources for Unsecured paths
* review comment - Add test
* fix tests
* fix test
* Fix Kerberos Authentication failing requests without cookies.
KerberosAuthenticator was failing `First` request from the clients.
After authentication we were setting the cookie properly but not
setting the the authenticated flag in the request. This PR fixed that.
Additional Fixes -
* Removing of Unused SpnegoFilterConfig - replaced by
KerberosAuthenticator
* Unused internalClientKeytab and principal from KerberosAuthenticator
* Fix docs accordingly and add docs for configuring an escalated
client.
* Fix excluded path config behavior
* spelling correction
* Revert "spelling correction"
This reverts commit fb754b43d8.
* Revert "Fix excluded path config behavior"
This reverts commit 3901047769.
* Add graceful shutdown timeout
* Handle interruptedException
* Incorporate code review comments
* Address code review comments
* Poll for activeConnections to be zero
* Use statistics handler to get active requests
* Use native jetty shutdown gracefully
* Move log line back to where it was
* Add unannounce wait time
* Make the default retain prior behavior
* Update docs with new config defaults
* Make duration handling on jetty shutdown more consistent
* StatisticsHandler is a wrapper
* Move jetty lifecycle error logging to error
Originally written by @AlexanderSaydakov in druid-io/druid-io.github.io#448.
I also added redirects and updated links to point to the new
datasketches-extension.html landing page for the extension, rather than to
the old page about theta sketches.
* Use the official aws-sdk instead of jet3t
* fix compile and serde tests
* address comments and fix test
* add http version string
* remove redundant dependencies, fix potential NPE, and fix test
* resolve TODOs
* fix build
* downgrade jackson version to 2.6.7
* fix test
* resolve the last TODO
* support proxy and endpoint configurations
* fix build
* remove debugging log
* downgrade hadoop version to 2.8.3
* fix tests
* remove unused log
* fix it test
* revert KerberosAuthenticator change
* change hadoop-aws scope to provided in hdfs-storage
* address comments
* address comments
* Support for disabling bitmap indexes.
Can save space for columns where bitmap indexes are pointless (like
free-form text).
* Remove import.
* Fix CompactionTaskTest.
* Update for review comments.
* Review comments, tests.
* Fix test.
* Support map type in orc extension.
Added getMapObject in OrcHadoopInputRowParser
Updated parse tests to parse map-type field in OrcHadoopInputRowParserTest
* changed from for-loop to foreach
* added resolution of column names when map types are exploded to several
columns. updated the document as well -- orc.md.
* Update orc.md
change from review
* opentsdb emitter extension
* doc for opentsdb emitter extension
* update opentsdb emitter doc
* add the ms unit to the constant name
* add a configurable event limit
* fix version to 0.13.0-SNAPSHOT
* using a thread to consume metric event
* rename method and parameter
* Update post-aggregations.md
I think this is more clear. I am not sure how multiplying by 100 is involved in averaging...
* Update post-aggregations.md
adding additional aggregator
* Update post-aggregations.md
The behavior is configurable through druid.extensions.useExtensionClassloaderFirst.
It is useful when extensions want to load a dependency different from one provided
by Druid, for example a different version of geoip or protobuf.
Code changes:
- In the lookup-based extractionFns, inherit injective property from
the lookup itself if not specified.
Doc changes:
- Add a "Query execution" section to the lookups doc explaining how
injective lookups and their optimizations work.
- Remove scary warnings against using registeredLookup extractionFns.
They are necessary and important since they work with filters and
function cascades -- two things that the dimension specs do not do.
They deserve to be first class citizens.
- Move the "registeredLookup" fn above the "lookup" fn. It's probably
more commonly used, so the docs read better this way.
* More memory limiting for HttpPostEmitter
* Less aggressive large events test
* Fix tests
* Restrict batch queue size first, keep minimum of 2 queue items
* Encrypting MySQL connections
* Update docs
* Make verifyServerCertificate a configurable parameter
* Change password parameter and doc update
* Make server certificate verification disabled by default
* Update tostring
* Update docs
* Add check for trust store passwords
* Add warning for null password
* just renaming of SegmentChangeRequestHistory etc
* additional change history refactoring changes
* WorkerTaskManager a replica of WorkerTaskMonitor
* HttpServerInventoryView refactoring to extract sync code and robustification
* Introducing HttpRemoteTaskRunner
* Additional Worker side updates
* Add freeSpacePercent config in segment location config to enforce free space while storing segments
* address review comments
* address review comments: more doc on freeSpacePercent and use Double for freeSpacePercent
Suneet Saldanha
Jonathan Wei
Jihoon Son
Chi Cao Minh
Clint Wylie
Himanshu
Benjamin Hopp
Parag Jain
Vadim Ogievetsky
Roman Leventov
Lucas Capistrant
Fangyuan Deng
SeKing
Surekha
fst0
Gian Merlino
Jad Naous
Tijo Thomas
Giuseppe Martino
Eyal Yurman
David Glasser
Abhishek Radhakrishnan
Kamal Gurala
Mingming Qiu
Mitch Lloyd
Nishant Bangarwa
Mohammad J. Khan
Xavier Léauté
pdeva
Sashidhar Thallam
Rye
legendtkl
Furkan KAMACI
Fokko Driesprong
Alexandre Yang
Nathan
Samarth Jain
Nathan
Magnus Henoch
Atul Mohan
Dinesh Sawant
Chi Cao Minh
Xue Yu
Alexander Saydakov
Benedict Jin
Clint Wylie
Justin Borromeo
Xue Yu
awelsh93
Fangjin Yang
gocho1
Gian Merlino
andrewluotechnologies
Magnus Henoch
Jinseon Lee
Eyal Yurman
Adam Peck
Slim Bouguerra
Kazuhito Takeuchi
zhaojiandong
Qi Shu
Michael Trelinski
Charles Allen
Hongze Zhang
Pierre-Emile Ferron
Venkatraman P
jorbay-au
scrawfor
Edward Gan
Egor Riashin
lxqfy
Navin Kumar
Janek Lasocki-Biczysko
Dayue Gao
dongyifeng
thomask
Joshua Sun
David Lim
Vincent Newkirk
rcgarcia74
Evans Hauser
seoeun
Caroline1000
Deiwin Sarjas
Niketh Sabbineni
taiii
patelh
robertervin
vishnu rao
Shiv Toolsidass
adursun
Benedict Jin
Alexander Saydakov
Jim Slattery
Susie
Ryan Plessner
Andrés Gómez
Dylan Wylie
varaga
zhangxinyu
Siddharth Subramanian
Joseph Glanville
Michael Schnupp
Abhishek Kaushik
Kirill Kozlov
kaijianding
Stuart McLean
Jakub Kukul
David Lim
Caroline1000
Alexander T
Arup Malakar
Dyana Rose
Nathan Hartwell
Christoph Hösler
Alexander Korablev
Parag Jain
Javier Collado
Dan Suzuki
Andrew
Stephanie Rivera
Fokko Driesprong
Akash Dwivedi
Shen Liu
Yuya Fujiwara
Chuanlei Ni