Usually, when a user is promoted to TL2 two messages are sent. The
first one is a system message 'tl2_promotion_message' which triggers a
'system_message_sent' Discourse event.
When the event is fired and if Discourse Narrative Bot is enabled, then
a second message is sent to the recipient of the first message. The
recipients was determined by looking at the list of users that can
access that topic and pick the last one. This method does not work if
'site_contact_group_name' site setting is set because it adds the group
in the list of recipients.
A solution to this problem would have been to select the last user in
the list of 'topic_allowed_users', but an even better solution is to
pass the name of the recipients when the 'system_message_sent'
Discourse event is fired.
AWS recommends running buckets without ACLs, and to use resource policies to manage access control instead.
This is not a bad idea, because S3 ACLs are whack, and while resource policies are also whack, they're a more constrained form of whack.
Further, some compliance regimes get antsy if you don't go with the vendor's recommended settings, and arguing that you need to enable ACLs on a bucket just to store images in there is more hassle than it's worth.
The new site setting (s3_use_acls) cannot be disabled when secure
uploads is enabled -- the latter relies on private ACLs for security
at this point in time. We may want to reexamine this in future.
Not all revisions involve changes to the actual post/topic content. We
may want to know if a revisions includes the topic title or post raw.
Specifically introducing these for use in the Akismet plugin to
conditionally queue checks.
What does this change do?
Suggested topics by default are ordered in the following way:
1. Unread topics in current category of topic that is being viewed
2. Unread topics in other categories
3. New topics in current category of topics that is being viewed
4. New topics in other categories
5. Random topics
With the experimental new new view, we want to remove the concept of
read and new so that new order is as such:
1. Topics created by the current user with posts that the user has not
read ordered by topic's bumped date
2. Topics in current category of topic with posts that the user has not
read ordered by topic's bumped date
3. Topics in other categories with posts that the user has not read
ordered by topic's bumped date
4. Random topics ordered by topic's bumped date
When a topic already has multiple synonym tags of a target tag, if we try to update the "`tag_id`" column to target tag id then it will raise a unique violation error since there are multiple synonyms present in the topic. So before doing that action, we must delete the problematic tags so the topic has only one synonym tag to update.
This is not an issue when the topic has a target tag already along with synonyms.
```
1) TopicsFilter#filter_from_query_string ordering topics filter when ordering topics by creation date when query string is `order:created-invalid` should return topics ordered by the default order
Failure/Error:
expect(
TopicsFilter
.new(guardian: Guardian.new)
.filter_from_query_string("order:#{order}-invalid")
.pluck(:id),
).to eq(Topic.all.order(:id).pluck(:id))
expected: [484, 485, 486]
got: [486, 484, 485]
```
Prior to this commit, we didn't have RTL versions of our admin and plugins CSS bundles and we always served LTR versions of those bundles even when users used an RTL locale, causing admin and plugins UI elements to never look as good as when an LTR locale was used. Example of UI issues prior to this commit were: missing margins, borders on the wrong side and buttons too close to each other etc.
This commit creates an RTL version for the admin CSS bundle as well as RTL bundles for all the installed plugins and serves those RTL bundles to users/sites who use RTL locales.
* FEATURE: reduce avatar sizes to 6 from 20
This PR introduces 3 changes:
1. SiteSetting.avatar_sizes, now does what is says on the tin.
previously it would introduce a large number of extra sizes, to allow for
various DPIs. Instead we now trust the admin with the size list.
2. When `avatar_sizes` changes, we ensure consistency and remove resized
avatars that are not longer allowed per site setting. This happens on the
12 hourly job and limited out of the box to 20k cleanups per cycle, given
this may reach out to AWS 20k times to remove things.
3.Our default avatar sizes are now "24|48|72|96|144|288" these sizes were
very specifically picked to limit amount of bluriness introduced by webkit.
Our avatars are already blurry due to 1px border, so this corrects old blur.
This change heavily reduces storage required by forums which simplifies
site moves and more.
Co-authored-by: David Taylor <david@taylorhq.com>
Legal topics, such as the Terms of Service and Privacy Policy topics
do not make sense if the entity creating the community is not a company.
These topics will be created and updated only when the company name is
present and deleted when it is not.
This commit prevents unallowed URLs in iframe src by adding a relative path like `https://bob.com/abc/def/../ghi`. Currently, the iframe linking to the site uses the current_user, not the post's author, so users who have no access to a certain path are not able to view anything they shouldn't.
In some cases reverse chronological can be very important.
- Oldest post by sam
- Oldest topic by sam
Prior to these new filters we had no way of searching for them.
Now the 2 new orders `order:oldest` and `order:oldest_topic` can be used
to find oldest topics and posts
* Update spec/lib/search_spec.rb
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Update spec/lib/search_spec.rb
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
---------
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FIX: Video thumbnails can have duplicates
It's possible that a duplicate video or even a very similar video could
generate the same video thumbnail. Because video thumbnails are mapped
to their corresponding video by using the video sha1 in the thumbnail
filename we need to allow for duplicate thumbnails otherwise even when a
thumbnail has been generated for a topic it will not be mapped
correctly.
This will also allow you to re-upload a video on the same topic to
regenerate the thumbnail.
* fix typo
This commit makes some fundamental changes to how hashtag cooking and
icon generation works in the new experimental hashtag autocomplete mode.
Previously we cooked the appropriate SVG icon with the cooked hashtag,
though this has proved inflexible especially for theming purposes.
Instead, we now cook a data-ID attribute with the hashtag and add a new
span as an icon placeholder. This is replaced on the client side with an
icon (or a square span in the case of categories) on the client side via
the decorateCooked API for posts and chat messages.
This client side logic uses the generated hashtag, category, and channel
CSS classes added in a previous commit.
This is missing changes to the sidebar to use the new generated CSS
classes and also colors and the split square for categories in the
hashtag autocomplete menu -- I will tackle this in a separate PR so it
is clearer.
https://meta.discourse.org/t/improving-mailman-email-parsing/253041
When mirroring a public mailling list which uses mailman, there were some cases where the incoming email was not associated to the proper user.
As it happens, for various (undertermined) reasons, the email from the sender is often not in the `From` header but can be in any of the following headers: `Reply-To`, `CC`, `X-Original-From`, `X-MailFrom`.
It might be in other headers as well, but those were the ones we found the most reliable.
Currently processing emails that are blank or have a nil value for the mail will cause several errors.
This update allows emails with blank body or missing sender to log the blank email error to the mail logs rather than throwing an error.
### What is this change?
The lounge category was replaced with the general category in https://github.com/discourse/discourse/pull/18097.
However, there are still a few references to the lounge category in code. In particular, `Category#seeded?` is erroring out in production looking for `SiteSetting.lounge_category_id`.
* FIX: Displaying the wrong number of minimum tags in the composer
When the minimum number of tags set for the category is larger than the minimum number of tags
set in the category tag-groups, the composer was displaying the wrong value.
This commit fixes the value displayed in the composer to show the max value between the required
for the category and the tag-groups set for the category.
This bug was reported on Meta in https://meta.discourse.org/t/tags-from-multiple-tag-groups-required-only-suggest-select-at-least-one-tag/263817
* FIX: Limiting tags in categories not working as expected
When a category was restricted to a tag group A, which was set to only allow
one tag from the group per topic, selecting a tag belonging only to A returned
other tags from A that also belonged to other group/s (if any).
Example:
Tag group A: alpha, beta, gamma, epsilon, delta
Tag group B: alpha, beta, gamma
Both tag groups set to only allow one tag from the group per topic.
If Category 1 was set to only allow tags from the tag group A, and the first tag
selected was epsilon, then, because they also belonged to tag group B, the tags
alpha, beta, and gamma were still returned as valid options when they should not be.
This commit ensures that once a tag from a tag group that restricts its tags to
one per topic is selected, no other tag from this group is returned.
This bug was reported on Meta in https://meta.discourse.org/t/limiting-tags-to-categories-not-working-as-expected/263143.
* FIX: Moving topics does not prompt to add required tag for new category
When a topic moved from a category to another, the tag requirements
of the new category were not being checked.
This allowed a topic to be created and moved to a category:
- that limited the tags to a tag group, with the topic containing tags
not allowed.
- that required N tags from a tag group, with the topic not containing
the required tags.
This bug was reported on Meta in https://meta.discourse.org/t/moving-tagged-topics-does-not-prompt-to-add-required-tag-for-new-category/264138.
* FIX: Editing topics with tag groups from parents allows incorrect tagging
When there was a combination between parent tags defined in a tag group
set to allow only one tag from the group per topic, and other tag groups
relying on this restriction to combine the children tag types with the
parent tag, editing a topic could allow the user to insert an invalid
combination of these tags.
Example:
Automakers tag group: landhover, toyota
- group set to limit one tag from the group per topic
Toyota models group: land-cruiser, hilux, corolla
Landhover models group: evoque, defender, discovery
If a topic was initially set up with the tags toyota, land-cruiser it was
possible to edit it by removing the tag toyota and adding the tag landhover
and other landhover model tags like evoque for example.
In this case, the topic would end up with the tags toyota, land-cruiser,
landhover, evoque because Discourse will automatically insert the
missing parent tag toyota when it detects the tag land-cruiser.
This combination of tags would violate the restriction specified in
the Automakers tag group resulting in an invalid combination of tags.
This commit enforces that the "one tag from the group per topic"
restriction is verified before updating the topic tags and also
make sure the verification checks the compatibility of parent tags that
would be automatically inserted.
After the changes, the user will receive an error similar to:
The tags land-cruiser, landhover cannot be used simultaneously.
Please include only one of them.
TopicsFilter is meant to generate a query scope from a given string so
we don't really need to ensure any ordering outside of the supported
order filters.
- Update welcome topic copy
- Edit the welcome topic automatically when the title or description changes
- Remove “Create your Welcome Topic” banner/CTA
- Add "edit welcome topic" user tip
After this change, in order to join a chat channel, a user needs to be in a group with at least “Reply” permission for the category. If the user only has “See” permission, they are able to preview the channel, but not join it or send messages. The auto-join function also follows this new restriction.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
We were giving topics with repeated words extra weight in search index.
This meant that it was trivial to stuff words into title to dominate in search
given we search for exact title matches first.
The following tweak means that:
`invite invited invites`
and
`invite some stuff`
Both rank the same for title searching.
Titles are short and punchy, duplicating words should not give special
weight.
Requires a full reindex to take effect.
A category's slug can be encoded when
`SiteSetting.slug_generation_method` has been set to "encoded". As a
result, we have to support non ASCII characters as well.
This commit adds support for excluding categories when using the
`category:` filter with the `-` prefix. For example,
`-category:category-slug` will exclude all topics that belong to the
category with slug "category-slug" and all of its sub-categories.
To only exclude a particular category and not all of its sub-categories,
the `-` prefix can be used with the `=` prefix. For example,
`-=category:category-slug` will only exclude topics that belong to the
category with slug "category-slug". Topics in the sub-categories of
"category-slug" will still be included.
This amends it so our cached counting reliant specs run in synchronize mode
When running async there are situations where data is left over in the table
after a transactional test. This means that repeat runs of the test suite
fail.
Specifying more than two tag names when using the `tag:` filter was not
working because of a bug in the code where only the first two value in
the `tag:` filter was being selected.
What is the problem?
Consider the following timeline:
1. OP starts a topic.
2. Troll responds snarkily.
3. Flagger flags the post as “inappropriate”.
4. Admin agrees and hides the post.
5. Troll ninja-edits the post within the grace period, but still snarky.
6. Flagger flags the post as inappropriate again.
The current behaviour is that the flagger is met with an error saying the post has been reviewed and can't be flagged again for the same reason.
The desired behaviour is after someone has edited a post, it should be flaggable again.
Why is this happening?
This is related to the ninja-edit feature, where within a set grace period no new revision is created, but a new revision is required to flag the same post for the same reason.
So essentially there is a window between the naughty corner cooldown where a flagged post can't be edited, and the ninja-edit grace period, where an edit can be made without a new revision. Posts that are edited within this window can't be re-flagged by the same user.
|-----------------|-------------------------------|
^ Flag accepted | ~~~~~~~~~~~~~ 🥷🏻 ~~~~~~~~~~~~ |
| ^ Editing grace period over
^ Naughty corner cooldown over
How does this fix it?
We already create a new revision when ninja-editing a post with a pending flag. The issue above happens only in the case where the flag is already accepted.
This change extends the existing behaviour so that a new revision is created when ninja-editing any flagged post, regardless of the status of the flag. (Deleted flags excluded.)
This should also help with posterity, avoiding situations where a successfully flagged post looks innocuous in the history because it was ninja-edited, and vice versa.
This header is used by Microsoft Exchange to indicate when certain types of
autoresponses should not be generated for an email.
It triggers our "is this mail autogenerated?" detection, but should not be used
for this purpose.
This allows multiple ordering to be specified by using a comma seperated string.
For example, `order:created,views` would order the topics by
`Topic#created_at` and then `Topic#views.
An older change about optimising images caused the selector that adds lightboxing not to apply on quoted images. This fixes that. The selector is now not applicable as optimisation occurs in a separate place.
This change allows quoted images to be opened in a lightbox.
This new modifier can be used by plugins to modify search ordering.
Specifically plugins such as discourse_solved can amend search ordering
so solved topics bump to the top.
Also correct edge case where low and high sort priority categories did not
order correctly when it came to closed/archived
This commit adds support for the following ordering filters:
1. `order:activity` which orders the topics by `Topic#bumped_at` in descending order
2. `order:activity-asc` which orders the topics by `Topic#bumped_at` in ascending order
3. `order:latest-post` which orders the topics by `Topic#last_posted_at` in descending order
4. `order:latest-post-asc` which orders the topics by `Topic#last_posted_at` in ascending order
5. `order:created` which orders the topics by `Topic#created_at` in descending order
6. `order:created-asc` which orders the topics by `Topic#created_at` in ascending order
7. `order:views` which orders the topics by `Topic#views` in descending order
8. `order:views-asc` which orders the topics by `Topic#views` in ascending order
9. `order:likes` which orders the topics by `Topic#likes` in descending order
10. `order:likes-asc` which orders the topics by `Topic#likes` in ascending order
11. `order:likes-op` which orders the topics by `Post#like_count` of the first post in the topic in descending order
12. `order:likes-op-asc` which orders the topics by `Post#like_count` of the first post in the topic in ascending order
13. `order:posters` which orders the topics by `Topic#participant_count` in descending order
14. `order:posters-asc` which orders the topics by `Topic#participant_count` in ascending order
15. `order:category` which orders the topics by `Category#name` of the topic's category in descending order
16. `order:category-asc` which orders the topics by `Category#name` of the topic's category in ascending order
Multiple order filters can be composed together and the order of ordering is applied based on the position of the filter
in the query string. For example, `order:views order:created` will order the topics by `Topic#views` in descending order
and then order the topics by `Topics#created_at` in descending order.
This commit adds support for the following date filters:
1. `activity-before:<YYYY-MM-DD>` which filters for topics that have been bumped at or before given date
2. `activity-after:<YYYY-MM-DD>` which filters for topics that have been bumped at or after given date
3. `created-before:<YYYY-MM-DD>` which filters for topics that have been created at or before given date
4. `created-after:<YYYY-MM-DD>` which filters for topics that have been created at or after given date
5. `latest-post-before:<YYYY-MM-DD>` which filters for topics with the
latest post posted at or before given date
6. `latest-post-after:<YYYY-MM-DD>` which filters for topics with the
latest post posted at or after given date
If the filter has an invalid value, i.e string that cannot be converted
into a proper date in the `YYYY-MM-DD` format, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurrence of each filter will be taken into consideration.
Large or broken images are removed from oneboxes, but sometimes images
were removed when they were oneboxed too. The reason is that images can
be oneboxed by the AllowlistedGenericOnebox or ImageOnebox and only
AllowlistedGenericOnebox was handled correctly.
When revising a post, if the topic that post belonged to did not have a category attached it would error with
> NoMethodError (undefined method `read_restricted' for nil:NilClass)
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
Update chat and poll plugins to new pattern
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
* DEV: Support `likes-(min:max):<count>` on `/filter` route
This commit adds support for the following filters:
1. `likes-min`
2. `likes-max`
3. `views-min`
4. `views-max`
5. `likes-op-min`
6. `likes-op-max`
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurrence of each filter will be taken into consideration.
This commit adds support for the `posters-min:<count>` and
`posters-max:<count>` filters for the topics filtering query language.
`posters-min:1` will filter for topics with at least a one poster while
`posters-max:3` will filter for topics with a maximum of 3 posters.
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurence of each filter will be taken into consideration.
This commit adds support for the `posts-min:<count>` and
`posts-max:<count>` filters for the topics filtering query language.
`posts-min:1` will filter for topics with at least a one post while
`posts-max:3` will filter foor topics with a maximum of 3 posts.
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurence of each filter will be taken into consideration.
When we "pull hotlinked images" on onebox images, they are added to the uploads table and their dominant color is calculated. This commit adds the data to the HTML so that it can be used by the client in the same way as non-onebox images. It also adds specific handling to the new `discourse-lazy-videos` plugin.
This commit adds support for the `created-by:<username>` query filter
which will return topics created by the specified user. Multiple
usernames can be specified by comma seperating the usernames like so:
`created-by:username1,username2`. This will filter for topics created by
either of the specified users. Multiple `created-by:<username>` can also
be composed together. `created-by:username1 created-by:username2` is
equivalent to `created-by:username1,username2`.
This was inadvertently removed in 4c46c7e. In very specific scenarios,
this could be used execute arbitrary JavaScript.
Only affects instances where SVGs are allowed as uploads and CDN is not
configured.
Previously, Discourse's password hashing was hard-coded to a specific algorithm and parameters. Any changes to the algorithm or parameters would essentially invalidate all existing user passwords.
This commit introduces a new `password_algorithm` column on the `users` table. This persists the algorithm/parameters which were use to generate the hash for a given user. All existing rows in the users table are assumed to be using Discourse's current algorithm/parameters. With this data stored per-user in the database, we'll be able to keep existing passwords working while adjusting the algorithm/parameters for newly hashed passwords.
Passwords which were hashed with an old algorithm will be automatically re-hashed with the new algorithm when the user next logs in.
Values in the `password_algorithm` column are based on the PHC string format (https://github.com/P-H-C/phc-string-format/blob/master/phc-sf-spec.md). Discourse's existing algorithm is described by the string `$pbkdf2-sha256$i=64000,l=32$`
To introduce a new algorithm and start using it, make sure it's implemented in the `PasswordHasher` library, then update `User::TARGET_PASSWORD_ALGORITHM`.
This commit adds support for the `in:<topic notification level>` query
filter. As an example, `in:tracking` will filter for topics that the
user is watching. Filtering for multiple topic notification levels can
be done by comma separating the topic notification level keys. For
example, `in:muted,tracking` or `in:muted,tracking,watching`.
Alternatively, the user can also compose multiple filters with `in:muted
in:tracking` which translates to the same behaviour as
`in:muted,tracking`.
This commit adds support for the `in:pinned` filter to the topics filtering
query language. When the filter is present, it will filter for topics
where `Topic#pinned_until` is greater than `Topic#pinned_at`.
This adds a SiteSetting, which when enabled, creates a small_action post for tag/category changes to the topic. It uses `topic.add_moderator_post, and passes raw text in, to describe the change.
Before this commit, composing multiple category filters with a query such as category:category1 and category:category2 would not return any results. This is because we were filtering for topics that belonged to both category1 and category2, which is impossible since a topic can only belong to a single category.
With this commit, specifying a query like category:category1 category:category2 will now translate to filtering for topics that belong to either the category1 or category2 category.
Invite only and Discourse connect could not be enabled at the same time
because of some legacy reason. This is a follow up commit to ce04db8,
355d51a and 40f6ceb.
This commit adds support for filtering for topics in specific
subcategories via the categories filter query language.
For example: `category:documentation:admins` will filter for topics and
subcategory topics in
the category with slug "admins" whose parent category has the slug
"documentation".
The `=` prefix can also be used such that
`=category:documentation:admins` will exclude subcategory topics of the
category with slug "admins" whose parent category has the slug
"documentation".
On the `/filter` route, the categories filtering query language is now
supported in the input per the example provided below:
```
category:bug => topics in the bug category AND all subcategories
=category:bug => topics in the bug category excluding subcategories
category:bug,feature => allow for categories either in bug or feature
=category:bug,feature => allow for exact categories match excluding sub cats
categories: => alias for category
```
Currently composing multiple category filters is not supported as we
have yet to determine what behaviour it should result in. For example,
`category:bug category:feature` would now return topics that are in both
the `bug` and `feature` category but it is not possible for a topic to
belong to two categories.
Add a modifier that will allow us to tune the results returned by suggested.
At the moment the modifier allows us to toggle including random results.
This was created for the discourse-ai module. It needs to switch off random
results when it returns related topics.
Longer term we can use it to toggle unread/new and other aspects.
This also demonstrates how to test the contract when adding modifiers.
Similar to the _map added for group_list SiteSettings in
e62e93f83a, this commit adds
the same extension for simple and compact `list` type SiteSettings,
so developers do not have to do the `.to_s.split("|")` dance
themselves all the time.
For example:
```
SiteSetting.markdown_linkify_tlds
=> "com|net|org|io|onion|co|tv|ru|cn|us|uk|me|de|fr|fi|gov|ddd"
SiteSetting.markdown_linkify_tlds_map
=> ["com", "net", "org", "io", "onion", "co", "tv", "ru", "cn", "us", "uk", "me", "de", "fr", "fi", "gov"]
```
There is no need to validate the user's emails when
promoting/demoting their trust level, this can cause
issues in things like Jobs::Tl3Promotions, we don't
need to fail in that case when all we are doing is changing
trust level.
Introduces a new API for plugin data modification without class-based extension overhead.
This commit introduces a new API that allows plugins to modify data in cases where they return different data rather than additional data, as is common with filtered_registers in DiscoursePluginRegistry. This API removes the need for defining class-based extension points.
When a plugin registers a modifier, it will automatically be called if the plugin is enabled. The core will then modify the parameter sent to it using the block registered by the plugin:
```ruby
DiscoursePluginRegistry.register_modifier(plugin_instance, :magic_sum_modifier) { |a, b| a + b }
sum = DiscoursePluginRegistry.apply_modifier(:magic_sum_filter, 1, 2)
expect(sum).to eq(3)
```
Key features of these modifiers:
- Operate in a stack (first registered, first called)
- Automatically disabled when the plugin is disabled
- Pass the cumulative result of all block invocations to the caller
The following are the changes being introduced in this commit:
1. Instead of mapping the query language to various query params on the
client side, we've decided that the benefits of having a more robust
query language far outweighs the benefits of having a more human readable query params in the URL.
As such, the `/filter` route will just accept a single `q` query param
and the query string will be parsed on the server side.
1. On the `/filter` route, the tags filtering query language is now
supported in the input per the example provided below:
```
tags:bug+feature tagged both bug and feature
tags:bug,feature tagged either bug or feature
-tags:bug+feature excluding topics tagged bug and feature
-tags:bug,feature excluding topics tagged bug or feature
```
The `tags` filter can also be specified multiple
times in the query string like so `tags:bug tags:feature` which will
filter topics that contain both the `bug` tag and `feature` tag. More
complex query like `tags:bug+feature -tags:experimental` will also work.
This change sets the ground work for allowing us to filter topics list
by tags in the following ways:
1. Filter for topics that matches all tags in a given set of tags
2. Filter for topics that matches any tags in a given set of tags
3. Exclude topics that matches all tags in a given set of tags
4. Exclude topics that matches any tags in a given set of tags
When we renamed the `default_categories_regular` to `default_categories_normal` we missed a site setting validation method. It allowed the duplicate category ids in `default_categories_normal` site setting and caused the problem in user registration process.
5176c689e9
When setting the ACL for optimized images after setting the
ACL for the linked upload (e.g. via the SyncACLForUploads job),
we were using the optimized image path as the S3 key. This worked
for single sites, however it would fail silently for multisite
sites since the path would be incorrect, because the Discourse.store.upload_path
was not included.
For example, something like this:
somecluster1/optimized/2X/1/3478534853498753984_2_1380x300.png
Instead of:
somecluster1/uploads/somesite1/2X/1/3478534853498753984_2_1380x300.png
The silent failure is still intentional, since we don't want to
break other things because of ACL updates, but now we will update
the ACL correctly for optimized images on multisite sites.
Our SafeMigrate system is designed to prevent tables/columns being dropped in pre-deploy migrations. Its regex-based detection was triggering incorrectly on `ALTER COLUMN DROP NOT NULL`.
There was a lot of duplication in the svg parsing and coercion code. This reduces that duplication and causes svg sprite parsing to happen earlier so that more computation is cached.
Our schema allows `category.topic_id` to be NULL. Null values shouldn't actually happen in production, but it is very common in tests because `Fabricate(:category)` skips creating the definition topic to improve performance. Before this commit, a NULL category.topic_id would cause all subcategory topics to be excluded from a TopicQuery result. This is because, in postgres, `NULL <> anything` is falsy. Instead, we can use `IS DISTINCT FROM`, which will return true when NULL is compared to a non-NULL value.
Why is this change required?
Prior to this change, we would list all group messages that a user
has access to in the user menu messages notifications panel dropdown.
However, this did not respect the topic's notification level setting and
group messages which the user has set to 'normal' notification level were
being displayed
What does this commit do?
With this commit, we no longer display all group messages that a user
has access to. Instead, we only display group messages that a user is
watching in the user menu messages notifications panel dropdown.
Internal Ref: /t/94392
Follow up to 4d2a95ffe6. Sometimes
due to the original UploadReference migration or other issues,
multiple UploadReference records can have the exact same
created_at date and time. To tiebreak and correct the SQL order
when this happens, we can add a secondary `id ASC` ordering
when we check for the first upload reference.
Similar spirit to e195e6f614,
this moves the Bookmarkable registration to DiscoursePluginRegistry
so plugins which are not enabled do not register additional
bookmarkable classes.
When a theme setting of type `upload` has a default upload, it should return the URL of the specified default upload until a custom upload is used for the setting. However, currently this isn't the case and we get null instead of the default upload URL.
The reason for this is because the `super` method of `#value` already returns the default upload URL (if there's one), so we can't pass that to `cdn_url` which expects an upload ID:
c961dcc757/lib/theme_settings_manager.rb (L212)
This commit fixes the bug by skipping the call to `cdn_url` when we fallback to the default upload for the setting value.
* UX: add type tag and design update
* UX: clarify status copy in reviewQ
* DEV: switch to selectKit
* UX: color approve/reject buttons in RQ
* DEV: regroup actions
* UX: add type tag and design update
* UX: clarify status copy in reviewQ
* Join questions for flagged post with "or" with new I18n function
* Move ReviewableScores component out of context
* Add CSS classes to reviewable-item based on human type
* UX: add table header for scoring
* UX: don't display % score
* UX: prefix modifier class with dash
* UX: reviewQ flag table styling
* UX: consistent use of ignore icon
* DEV: only show context question on pending status
* UX: only show table headers on pending status
* DEV: reviewQ regroup actions for hidden posts
* UX: reviewQ > approve/reject buttons
* UX: reviewQ add fadeout
* UX: reviewQ styling
* DEV: move scores back into component
* UX: reviewQ mobile styling
* UX: score table on mobile
* UX: reviewQ > move meta info outside table
* UX: reviewQ > score layout fixes
* DEV: readd `agree_and_keep` and fix the spec tests.
* Fix the spec tests
* fix the quint test
* DEV: readd deleting replies
* UX: reviewQ copy tweaks
* DEV: readd test for ignore + delete replies
* Remove old
* FIX: Add perform_ignore back in for backwards compat
* DEV: add an action alias `ignore` for `ignore_and_do_nothing`.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
Co-authored-by: Vinoth Kannan <svkn.87@gmail.com>
Follow up to 098ab29d41. Since
we just used a `cattr_reader` on `About` this was not safe
for multisite, since some sites could have the chat plugin
enabled and some may not. Using `DiscoursePluginRegistry` gets
around this issue, and makes it so the chat stats only show
for a site if `chat_enabled` is true.
Sometimes we get Maps URL containing a zoom level as a float (17.5z and
not 17z) but this doesn’t work with our current onebox implementation.
While Google accepts those float zoom levels, it removes automatically
the floating part in the URL (thus when visiting a Maps URL containing
17.5z, the URL will be rewritten shortly after as 17z). When putting a
float zoom level in an embedded URL, this actually breaks (Maps API
returns a 400 error).
This patch addresses the issue by allowing the onebox engine to match on
a zoom level expressed as a float but we only keep the integer part thus
rendering properly maps.
This commit implements many changes to topic and comments embedding. It
deprecates the class_name field from EmbeddableHost and suggests using
the className parameter. discourse_username parameter has been
deprecated and it will fetch it from embedded site from the author or
discourse-username meta.
See the updated code sample from Admin > Customize > Embedding page.
* FEATURE: Add className parameter for Discourse embed
* DEV: Hide class_name from EmbeddableHost
* DEV: Deprecate class_name field of EmbeddableHost
* FEATURE: Use either author or discourse-username meta tag
* DEV: Deprecate discourse_username parameter
* DEV: Improve embed code sample
Original solution to use `description` instead of `text_description` was wrong: https://github.com/discourse/discourse/pull/20436
Problem is that we have to escape HTML tags.
However, we would like to use escape method which is keep `/` intact. Expected behavior is given by ERB::Util.html_escape instead of Rack::Utils.escape_html
/t/92015
When invoking e.g. `can_see?(Foo.new)`, the guardian checks if there's a method `#can_see_foo?` defined and if so uses that to determine whether the user can see it or not.
When such a method is not defined, the guardian currently returns `true`, but it is probably a better call (pun intended) to make it "safe by default" and return `false` instead. I.e. if you can't explicitly see it, you can't see it at all.
This change makes the change to `Guardian#can_see?` to fall back to `false` if no visibility check method is defined.
For `#can_see_user?` and `#can_see_tag?` we don't have any particular logic that prevents viewing. We previously relied on the implicit `true` value, but since that's now change to `false`, I have explicitly implemented these two methods in `UserGuardian` and `TagGuardian` modules. If in the future we want to add some logic for it, this would be the place.
To be clear, **the behaviour remains the same**, but the `true` value is now explicit rather than implicit.
The current default timeout is hardcoded to 2 seconds which is proving
too low for certain cases, and resulting in sporadic timeouts due to slow DNS queries.
As of ba3f62f576, handlebars templates are colocated with js files so the path to hbs templates referenced by this rake task is no longer valid. This commit fixes the path to hbs templates and updates a couple of files that are generated by the rake task.
- Reduce duplication of terms in post index from unlimited to 6. This will
result in reduced index size and reduced weighting for posts containing
a huge amount of duplicate terms. (Eg: a post containing "sam sam sam sam
sam sam sam sam", will index as "sam sam sam sam sam sam", only including
the word up to 6 times.) This corrects a flaw where title weighting could
be ignored.
- Prioritize exact matches of words in titles. Our search always performs
a prefix match. However we want to give special weight to exact title matches
meaning that a search for "sum" will find topics such as "the sum of us" vs
"summer in spring".
- Pick up fixes to our search algorithm which are missing from old indexes.
Specifically pick up the fix that indexes URLs properly. (`https://happy.com`
was stemmed to `happi` in keywords and then was not searchable)
see also:
https://meta.discourse.org/t/refinements-to-search-being-tested-on-meta/254158
Indexing will take a while and work in batches, in the background.
This commit adds backend support for a new topics list that combines both the current unread and new topics lists. We're going to experiment with this new list (name TBD) internally and decide if this feature is something that we want to fully build.
Internal topic: t/77234.
* FIX: do not notify admins on suppressed categories
Avoid notifying admins on categories where they are not explicitly members
in cases where SiteSetting.suppress_secured_categories_from_admin is
enabled.
This helps keep notification stream clean and avoids admins mistakenly
being invited to discussions that should be suppressed
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
This PR is a major change to Sass compilation in Discourse.
The new version of sass-ruby moves to dart-sass putting we back on the supported version of Sass. It does so while keeping compatibility with the existing method signatures, so minimal change is needed in Discourse for this change.
This moves us
From:
- sassc 2.0.1 (Feb 2019)
- libsass 3.5.2 (May 2018)
To:
- dart-sass 1.58
This update applies the following breaking changes:
>
> These breaking changes are coming soon or have recently been released:
>
> [Functions are stricter about which units they allow](https://sass-lang.com/documentation/breaking-changes/function-units) beginning in Dart Sass 1.32.0.
>
> [Selectors with invalid combinators are invalid](https://sass-lang.com/documentation/breaking-changes/bogus-combinators) beginning in Dart Sass 1.54.0.
>
> [/ is changing from a division operation to a list separator](https://sass-lang.com/documentation/breaking-changes/slash-div) beginning in Dart Sass 1.33.0.
>
> [Parsing the special syntax of @-moz-document will be invalid](https://sass-lang.com/documentation/breaking-changes/moz-document) beginning in Dart Sass 1.7.2.
>
> [Compound selectors could not be extended](https://sass-lang.com/documentation/breaking-changes/extend-compound) in Dart Sass 1.0.0 and Ruby Sass 4.0.0.
SCSS files have been migrated automatically using `sass-migrator division app/assets/stylesheets/**/*.scss`
Previously due to an error archived topics were more prominent in search
than closed topics.
This amends our internal logic to ensure archived topics are bumped down
the list.
If a post contains domain with a word that stems to a non prefix single
words will not match it.
For example: in happy.com, `happy` stems to `happi`. Thus searches for happy
will not find URLs with it included.
This bloats the index a tiny bit, but impact is limited.
Will require a full reindex of search to take effect.
When we are done refining search we can consider a full version bump.
Previously to_tsquery would split terms and join with &
In PG 14 terms are split and use <-> which means followed directly by.
In PG 13:
discourse_test=# SELECT to_tsquery('english', '''hello world''');
to_tsquery
---------------------
'hello' & 'world'
(1 row)
In PG 14:
discourse_test=# SELECT to_tsquery('english', '''hello world''');
to_tsquery
---------------------
'hello' <-> 'world'
(1 row)
Change is very unobtrosive, we simply amend our to_tsquery to behave like
it used to behave and make no use of the `<->` operator
More detail at: https://akorotkov.github.io/blog/2021/05/22/pg-14-query-parsing/
Note that plainto_tsquery used elsewhere in Discourse keeps the exact
same function.
This also corrects a faulty test that was passing by a fluke on older
version of PG
We've had a couple of problems with the R2 gem where it generated a broken RTL CSS bundle that caused a badly broken layout when Discourse is used in an RTL language, see a3ce93b and 5926386. For this reason, we're replacing R2 with `rtlcss` that can handle modern CSS features better than R2 does.
`rltcss` is written in JS and available as an npm package. Calling the `rltcss` from rubyland is done via the `rtlcss_wrapper` gem which contains a distributable copy of the `rtlcss` package and loads/calls it with Mini Racer. See https://github.com/discourse/rtlcss_wrapper for more details.
Internal topic: t/76263.
`--d-hover` is calculated to be equivalent to primary-100 in light mode, or primary-low in dark mode
`--d-selected` is calculated to be equivalent to primary-low in light mode, or primary-100 in dark mode
`lib/color_math` is introduced to provide some utilities for making these calculations.
* DEV: Change default bootstrap min users for private sites
Private sites should have a lower min users to escape bootstrap mode.
* reset back to 50 if site is changed to public, added some tests
* fix formatting
* Remove comment
* Move constant declaration
* Update config/initializers/014-track-setting-changes.rb
Shaving a bit of repetition
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* Remove commented out code
* stree
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
The new `prioritize_exact_search_match` can be used to force the search
algorithm to prioritize exact term matches in title when ranking results.
This is scoped narrowly to titles for cases such as a topic titled:
"organisation chart" and a search of "org chart".
If we scoped this wider, all discussion about "org chart" would float to
the top and leave a very common title de-prioritized.
This is a hidden site setting and it has some performance impact due
to double ranking.
That said, performance impact is somewhat mitigated cause ranking on
title alone is a very cheap operation.
* FEATURE: allow restricting duplication in search index
This introduces the site setting `max_duplicate_search_index_terms`.
Using this number we limit the amount of duplication in our search index.
This allows us to more correctly weight title searches, so bloated posts
don't unfairly bump to the top of search results.
This feature is completely disabled by default and behind a site setting
We will experiment with it first. Note entire search index must be rebuilt
for it to take effect.
---------
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Many users seems surprised by prefix matching in search leading to
unexpected results.
Over the years we always would return results starting with a search term
and not expect exact matches.
Meaning a search for `abra` would find `abracadabra`
This introduces the Site Setting `enable_search_prefix_matching` which
defaults to true. (behavior unchanged)
We plan to experiment on select sites with exact matches to see if the
results are less surprising
* FIX: Ensure soft-deleted topics can be deleted
The topic was not found during the deletion process because it was
deleted and `@post.topic` was nil.
* DEV: Use @topic instead of finding the topic every time
Under some situations, we would inadvertently return a public (unauthenticated) result to an authenticated API request. This commit adds the `Api-Key` header to our anonymous cache bypass logic.
When checking whether an existing upload should be secure
based on upload references, do not count deleted posts, since
there is still a reference attached to them. This can lead to
issues where e.g. an upload is used for a post then later on
a custom emoji.
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
This fixes a longstanding issue for sites with the
secure_uploads setting enabled. What would happen is a scenario
like this, since we did not check all places an upload could be
linked to whenever we used UploadSecurity to check whether an
upload should be secure:
* Upload is created and used for site setting, set to secure: false
since site setting uploads should not be secure. Let's say favicon
* Favicon for the site is used inside a post in a private category,
e.g. via a Onebox
* We changed the secure status for the upload to true, since it's been
used in a private category and we don't check if it's originator
was a public place
* The site favicon breaks :'(
This was a source of constant consternation. Now, when an upload is _not_
being created, and we are checking if an existing upload should be
secure, we now check to see what the first record in the UploadReference
table is for that upload. If it's something public like a site setting,
then we will never change the upload to `secure`.
This commit fixes the following issue:
* User creates a post
* Akismet or some other thing like requiring posts to be approved puts
the post in the review queue, deleting it
* Admin approves the post
* Email is never sent to mailing list mode subscribers
We intentionally do not enqueue this for every single post when
recovering a topic (i.e. recovering the first post) since the topics
could have a lot of posts with emails already sent, and we don't want
to clog sidekiq with thousands of notify jobs.
TL4 users can already list and unlist topics, but they can't see
the unlisted topics. This change brings this to par by allowing
TL4 users to also see unlisted topics.
Added in c2013865d7,
this migration was supposed to only turn off the hashtag
setting for existing sites (since that was the old default)
but its doing it for new ones too because we run all migrations
on new sites.
Instead, we should only run this if the first migration was
only just created, meaning its a new site.
When the thread is aborted, an exception is raised before the `start` of a job is set, and therefore raises an exception in the `ensure` block. This commit checks that `start` exists, and also adds `abort_on_exception=true` so that this issue would have caused test failures.
The `enable_new_notifications_menu` site setting allows sites that have
`navigation_menu` set to `legacy` to use the redesigned notifications
menu before switching to the new sidebar navigation menu.
This will give us some aggregate stats on the defer queue performance.
It is limited to 100 entries (for safety) which is stored in an LRU cache.
Scheduler::Defer.stats can then be used to get an array that denotes:
- number of runs and completions (queued, finished)
- error count (errors)
- total duration (duration)
We can look later at exposing these metrics to gain visibility on the reason
the defer queue is clogged.
Currently when generating a onebox for Discourse topics, some important
context is missing such as categories and tags.
This patch addresses this issue by introducing a new onebox engine
dedicated to display this information when available. Indeed to get this
new information, categories and tags are exposed in the topic metadata
as opengraph tags.
Fixes the support for kwargs in `DiscourseEvent.trigger()` on Ruby 3, e.g.
```rb
DiscourseEvent.trigger(:before_system_message_sent, message_type: type, recipient: @recipient, post_creator_args: post_creator_args, params: method_params)
```
Fixes https://github.com/discourse/discourse-local-site-contacts
If a secure upload's access_control_post was trashed, and an anon user
tried to look at that upload, they would get a 500 error rather than
the correct 403 because of an error inside the PostGuardian logic.
This commit does a couple of things:
1. Changes the limit of tags to include a subject for a
notification email to the `max_tags_per_topic` setting
instead of the arbitrary 3 limit
2. Adds both an X-Discourse-Tags and X-Discourse-Category
custom header to outbound emails containing the tags
and category from the subject, so people on mail clients
that allow advanced filtering (i.e. not Gmail) can filter
mail by tags and category, which is useful for mailing
list mode users
c.f. https://meta.discourse.org/t/headers-for-email-notifications-so-that-gmail-users-can-filter-on-tags/249982/17
This commit fixes an issue where the chat message bookmarks
did not respect the user's `bookmark_auto_delete_preference`
which they select in their user preference page.
Also, it changes the default for that value to "keep bookmark and clear reminder"
rather than "never", which ends up leaving a lot of expired bookmark
reminders around which are a pain to clean up.
This commit changes the default return value of `Auth::ManagedAuthenticator#primary_email_verified?` to false. We're changing the default to force developers to think about email verification when building a new authentication method. All existing authenticators (in core and official plugins) have been updated to explicitly define the `primary_email_verified?` method in their subclass of `Auth::ManagedAuthenticator` (example commit 65f57a4d05).
Internal topic: t/82084.
# Context
When a topic is reviewable by a group we give those group moderators some admin abilities including the ability to delete a topic.
# Problem
There are two main problems:
1. Currently when a group moderator deletes a topic they are redirected to root (not the same for staff)
2. Viewing the categories deleted topics (`c/foo/1/?status=deleted`) does not display the deleted topic to the group moderator (not the same for staff).
# Fix
If the `deleted_by` user is part a group that matches the `reviewable_by_group` on a topic then don't redirect. This is the default interaction for staff to give them the ability to do things like restore the topic in case it was accidentally deleted.
To render the deleted topics as expected for the group moderator I am utilizing [the guardian scope of `guardian.can_see_deleted_topics?` for said category](https://github.com/discourse/discourse/pull/19618/files#diff-288e61b8bacdb29d9c2e05b42da6837b0036dcf1867332d977ca7c5e74a44297R802-R803)
There is an issue where chat message processing breaks due to
unhandles `SocketError` exceptions originating in the SSRF check,
specifically in `FinalDestination::Resolver`.
This change gives `FinalDestination::SSRFDetector` a new error class
to wrap the `SocketError` in, and haves the `RetrieveTitle` class
handle that error gracefully.
A few specs in `dashboard_controller_spec.rb` set some state in redis but don't clean it up afterwards which causes other specs to fail when they're ran after `dashboard_controller_spec.rb`.
Related commit: 18467d4.
We were adding to the resolver's work queue before setting up the `@lookup` and `@parent` information. That could lead to the lookup being performed on the wrong (or `nil`) hostname. This also lead to some flakiness in specs.
This test occasionally fails in CI. I haven't been able to reproduce the issue locally. This logging will print some extra information when the assertion fails.
* DEV: Fix png optimization test flakyness
Update fixture with oxipng 7
This test broke when the pngoptimizer got better so the pre-optimized png in the fixtures was compressed further on upload creation, breaking the expected size.
* UX: Wizard Step Enhancements
- Remove illustrations
- Add Emoji graphic to top of steps
- Add description below step title
- Move point of contact to last step
* Move step count to header, plus some button navigation tweaks
* add remaining emoji to step headers
* fix button logic on steps
* Update Point of Contact
* remove automated messages field
* adjust styling for counter, title, and emoji
* Update wording for logos
* Fix tests
* fix prettier
* fix specs
* set same with for steps except for styling screen
* use sentence case; remove duplicate copy under your organization fields
* fix missing buttons on small screens
* add spacing to buttons; adjust font weight to labels
* adjust styling for community logo step; use sentence case for button
* update copy for point of contact text helper
* use sentence case for field labels
* fix ui tests
* use btn-back class to fix ui tests
* reduce bottom margin for toggle fields
* clean up
Co-authored-by: Ella <ella.estigoy@gmail.com>
Previously, restricted category chat channel was available for all groups - even `readonly`. From now on, only user who belong to group with `create_post` or `full` permissions can access that chat channel.
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
We were changing the user's user_option.bookmark_auto_delete_preference
to whatever they changed it to in the bookmark modal to use as default
for future bookmarks. However this was leading to a lot of confusion
since if you wanted to set it for one bookmark you had to remember to
change it back on the next one.
This commit removes that automatic functionality, and instead moves
the bookmark auto delete preference to User Preferences > Interface
in an explicit dropdown.
This commit adds a new notification that gets sent to admins when the site gets new features after an upgrade/deploy. Clicking on the notification takes the admin to the admin dashboard at `/admin` where they can see the new features under the "New Features" section.
Internal topic: t/87166.
Depending on the current state of things, sometimes the homepage style
wouldn't update because we were incorrectly blocking updates the
`desktop_category_page_style` site setting if the first item in the top
menu was 'categories'.
Added a test case to handle this situation.
See https://meta.discourse.org/t/248354
The guardian is useful for plugins to determine if the callback should
do anything. A common use case is to not do anything in the callback if
the user is anonymous.
* FEATURE: Add chat and sidebar toggles to the setup wizard
- Fix css alighnment
- Add Enable Chat Toggle
- Add Enable Sidebar Toggle
* Check for the chat plugin
* Account for new sidebar step
* update chat and sidebar description
* UI: add checkmark as a visual indicator that it is enabled
* use new navigation_memu site setting for enabling the sidebar
* fix tests
* Add tests
* Update lib/wizard/step_updater.rb
Use HEADER_DROPDOWN instead of LEGACY
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Fix spec. Use HEADER_DROPDOWN instead of LEGACY
Co-authored-by: Ella <ella.estigoy@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Bianca Nenciu
Matt Palmer
Selase Krakani
Alan Guo Xiang Tan
Osama Sayegh
Vinoth Kannan
锦心
Sam
Blake Erickson
Martin Brennan
Régis Hanol
David Battersby
Ted Johansson
Sérgio Saquetim
Richard
Jarek Radosz
Jan Cernik
Michael Brown
Natalie Tay
Isaac Janzen
David Taylor
Penar Musaraj
Mark VanLandingham
Daniel Waterworth
Renato Atilio
Joffrey JAFFEUX
Loïc Guitaut
Rafael dos Santos Silva
chapoi
Krzysztof Kotlarek
Leonardo Mosquera
Ghassan Maslamani
Roman Rizzi
dependabot[bot]
Ryan Vandersmith
Gerhard Schlager
