When the `tags_listed_by_group` site setting is enabled, we were seeing
the N+1 queries problem when multiple `TagGroup` records are listed.
This commit fixes that by ensuring that we are not filtering through the
`tags` association after the association has been eager loaded.
So it can easily be overwritten in a plugin for example.
### Added more tests to provide better coverage
We previously only had `u.silenced_till IS NULL` but I made it consistent with pretty much every other places where we check for "active" users.
These two new lines do change the query a tiny bit though.
**Before**
- You could not get the badge if you were currently silenced (no matter what period is being checked)
- You could get the badge if you were suspended 😬
**After**
- You can't get the badge if you were silenced during the past year
- You can't get the badge if you were suspended during the past year
### Improved the performance of the query by using `NOT EXISTS` instead of `LEFT JOIN / COUNT() = 0`
There is no difference in behaviour between
```sql
LEFT JOIN user_badges AS ub ON ub.user_id = u.id AND ...
[...]
HAVING COUNT(ub.*) = 0
```
and
```sql
NOT EXISTS (SELECT 1 FROM user_badges AS ub WHERE ub.user_id = u.id AND ...)
```
The only difference is performance-wise. The `NOT EXISTS` is 10-30% faster on very large databases (aka. posts and users in X millions). I checked on 3 of the largest datasets I could find.
Added in c2013865d7,
this migration was supposed to only turn off the hashtag
setting for existing sites (since that was the old default)
but its doing it for new ones too because we run all migrations
on new sites.
Instead, we should only run this if the first migration was
only just created, meaning its a new site.
When the thread is aborted, an exception is raised before the `start` of a job is set, and therefore raises an exception in the `ensure` block. This commit checks that `start` exists, and also adds `abort_on_exception=true` so that this issue would have caused test failures.
The `enable_new_notifications_menu` site setting allows sites that have
`navigation_menu` set to `legacy` to use the redesigned notifications
menu before switching to the new sidebar navigation menu.
This patch introduces a cookies rotator as indicated in the Rails
upgrade guide. This allows to migrate from the old SHA1 digest to the
new SHA256 digest.
The latter can be called directly from the Topic page object,
so we can remove some duplication between the two. There are
levels of page objects (e.g. entire page, component, complete flow)
and its perfectly valid to call one from another.
We've been doing some work to support new keyword argument semantics in Ruby 3. As part of that we made some changes to `DiscourseEvent::TestHelper`. The backwards compatibility fix doesn't work if the method is called with an empty hash as the final argument. This fix adds a valid option to the final hash in the particular test.
In "GlobalSetting.redirect_avatar_requests" mode, when the application gets
an avatar request it returns a "redirect" to the S3 CDN.
This shields the application from caching avatars and downloading from S3.
However clients will make 2 requests per avatar. (one to get redirect,
second to get avatar)
A one hour cache on a redirect means there may be an increase in CDN
traffic, given more clients will ask for the redirect every hour.
This may also lead to an increase in origin requests to the application.
To mitigate lets cache the CDN URL for 1 day.
The downside is that any changes to S3 CDN need extra care to allow for
the extra 1 day delay. (leave data around for 1 extra day)
This will give us some aggregate stats on the defer queue performance.
It is limited to 100 entries (for safety) which is stored in an LRU cache.
Scheduler::Defer.stats can then be used to get an array that denotes:
- number of runs and completions (queued, finished)
- error count (errors)
- total duration (duration)
We can look later at exposing these metrics to gain visibility on the reason
the defer queue is clogged.
0403cda1d1 introduced a regression where
topics in non read-restricted categories have its TopicTrackingState
MessageBus messages published with the `group_ids: [nil]` option. This
essentially means that no one would be able to view the message.
Currently when generating a onebox for Discourse topics, some important
context is missing such as categories and tags.
This patch addresses this issue by introducing a new onebox engine
dedicated to display this information when available. Indeed to get this
new information, categories and tags are exposed in the topic metadata
as opengraph tags.
When a topic belongs to category that is read restricted but permission
has not been granted to any groups, publishing ceratin topic tracking state
updates for the topic will result in the `MessageBus::InvalidMessageTarget` error being raised
because we're passing `nil` to `group_ids` which is not support by
MessageBus.
This commit ensures that for said category above, we will publish the
updates to the admin groups.
```
class Jobs::DummyDelayedJob < Jobs::Base
def execute(args = {})
end
end
RSpec.describe "Jobs.run_immediately!" do
before { Jobs.run_immediately! }
it "explodes" do
current_user = Fabricate(:user)
Jobs.enqueue_in(1.seconds, :dummy_delayed_job)
sign_in(current_user)
end
end
```
The test above will fail with the following error if `ActiveRecord::Base.connection_handler.clear_active_connections!` is called before the configured Capybara server checks out a connection from the connection pool.
```
ActiveRecord::ActiveRecordError:
Cannot expire connection, it is owned by a different thread: #<Thread:0x00007f437391df58@puma srv tp 001 /home/tgxworld/.asdf/installs/ruby/3.1.3/lib/ruby/gems/3.1.0/gems/puma-6.0.2/lib/puma/thread_pool.rb:106 sleep_forever>. Current thread: #<Thread:0x00007f437d6cfc60 run>.
```
We're not exactly sure if this is an ActiveRecord bug or not but we've
invested too much time into investigating this problem. Fundamentally,
we also no longer understand why `ActiveRecord::Base.connection_handler.clear_active_connections!` is being called in an ensure block
within `Jobs::Base#perform` which was added in
ceddb6e0da 10 years ago. This
commit moves the logic for running jobs immediately out of the
`Jobs::Base#perform` method into another `Jobs::Base#perform_immediately` method such that
`ActiveRecord::Base.connection_handler.clear_active_connections!` is not
called. This change will only impact the test environment.
If unaccent is called with quote-like Unicode characters then it can
generate invalid queries because some of the transformed quotes by
unaccent are not escaped and to_tsquery fails because of bad input.
This commits replaces more quote-like Unicode characters before
unaccent is called.
Fixes the support for kwargs in `DiscourseEvent.trigger()` on Ruby 3, e.g.
```rb
DiscourseEvent.trigger(:before_system_message_sent, message_type: type, recipient: @recipient, post_creator_args: post_creator_args, params: method_params)
```
Fixes https://github.com/discourse/discourse-local-site-contacts
If a secure upload's access_control_post was trashed, and an anon user
tried to look at that upload, they would get a 500 error rather than
the correct 403 because of an error inside the PostGuardian logic.
This change adds `target` to the set of attributes allowed by the
HTML sanitizer which is applied to the description of a user_field.
The rationale for this change:
* If one puts a link (<a>...</a>) in the description of a user_field
that is present and/or required at sign-up, the expectation is that
a prospective new user will click on that link during sign-up.
* Without an appropriate `target` attribute on the link, the new page
will be loaded in the same window/tab as the sign-up form, but this
will obliterate any fields that the user had already filled-out on
the form. (E.g., hitting the back-button will return to an
empty form.)
* Such UX behavior is incredibly aggravating to new users.
This change allows an admin to add a `target` attribute to links, to
instruct the browser to open them in a different window/tab, leaving
a sign-up form intact.
Links to category settings were created using the category name. If the name was a single word, the link would be valid (regardless of capitalization).
For example, if the category was named `Awesome`
`/c/Awesome/edit/settings`
is a valid URL as that is a case-insensitive match for the category slug of `awesome`.
However, if the category had a space in it, the URL would be
`/c/Awesome%20Name/edit/settings`
which does not match the slug of `awesome-name`.
This change uses the category slug, rather than the name, which is the expected behaviour (see `Category.find_by_slug_path`).
This commit does a couple of things:
1. Changes the limit of tags to include a subject for a
notification email to the `max_tags_per_topic` setting
instead of the arbitrary 3 limit
2. Adds both an X-Discourse-Tags and X-Discourse-Category
custom header to outbound emails containing the tags
and category from the subject, so people on mail clients
that allow advanced filtering (i.e. not Gmail) can filter
mail by tags and category, which is useful for mailing
list mode users
c.f. https://meta.discourse.org/t/headers-for-email-notifications-so-that-gmail-users-can-filter-on-tags/249982/17
We previously used post creator's guardian permissions which will raise an error if the reviewer added a staff-only (restricted) tag.
Co-authored-by: Natalie Tay <natalie.tay@discourse.org>
Having this set to ALL pollutes the JS system spec
logs with a bunch of unnecessary noise like this:
> "PresenceChannel '/chat-user/core/1' dropped message (received 315, expecting 246), resyncing..."
Or:
> "DEPRECATION: The \u003Cdiscourse@component:plugin-connector::ember1112>#save computed property was just overridden. This removes the computed property and replaces it with a plain value, and has been deprecated.
Now, we will only log errors. To configure this set
the `SELENIUM_BROWSER_LOG_LEVEL` env var.
Our working theory is that system tests on Github run on much less
powerful hardware as compared to running the tests on our work machines.
Hopefully, increasing the wait time now will help reduce some flakes
that we're seeing on Github.
This commit fixes an issue where the chat message bookmarks
did not respect the user's `bookmark_auto_delete_preference`
which they select in their user preference page.
Also, it changes the default for that value to "keep bookmark and clear reminder"
rather than "never", which ends up leaving a lot of expired bookmark
reminders around which are a pain to clean up.
When sending emails out via group SMTP, if we
are sending them to non-staged users we want
to mask those emails with BCC, just so we don't
expose them to anyone we shouldn't. Staged users
are ones that have likely only interacted with
support via email, and will likely include other
people who were CC'd on the original email to the
group.
Co-authored-by: Martin Brennan <martin@discourse.org>
Using a shared channel means that every user receives an update to the 'last_id' when *any* other user is logged out. If many users are being programmatically logged out at the same time, this can cause a very large number of message-bus polls.
This commit switches to use a user-specific channel, which means that each user has its own 'last id' which will only increment when they are logged out
This commit changes the default return value of `Auth::ManagedAuthenticator#primary_email_verified?` to false. We're changing the default to force developers to think about email verification when building a new authentication method. All existing authenticators (in core and official plugins) have been updated to explicitly define the `primary_email_verified?` method in their subclass of `Auth::ManagedAuthenticator` (example commit 65f57a4d05).
Internal topic: t/82084.
It should fix flakeys we have due to using_session. This commit is also fixing tests which were failing constantly with treadsafe enabled.
A test has also bene skipped as the issue couldn't be found so far.
More info: https://github.com/teamcapybara/capybara#threadsafe-mode
# Context
When a topic is reviewable by a group we give those group moderators some admin abilities including the ability to delete a topic.
# Problem
There are two main problems:
1. Currently when a group moderator deletes a topic they are redirected to root (not the same for staff)
2. Viewing the categories deleted topics (`c/foo/1/?status=deleted`) does not display the deleted topic to the group moderator (not the same for staff).
# Fix
If the `deleted_by` user is part a group that matches the `reviewable_by_group` on a topic then don't redirect. This is the default interaction for staff to give them the ability to do things like restore the topic in case it was accidentally deleted.
To render the deleted topics as expected for the group moderator I am utilizing [the guardian scope of `guardian.can_see_deleted_topics?` for said category](https://github.com/discourse/discourse/pull/19618/files#diff-288e61b8bacdb29d9c2e05b42da6837b0036dcf1867332d977ca7c5e74a44297R802-R803)
We show live user status on mentions starting from a76d864. But status didn’t appear on the post that appears on the bottom of the topic just after a user posted it (status appeared only after page reloading). This adds status to just posted posts.
Previously, browser logs would be printed to STDOUT halfway through the test run. This commit changes the behaviour so that the logs are included in the failure summary along with other rspec failure information.
There is an issue where chat message processing breaks due to
unhandles `SocketError` exceptions originating in the SSRF check,
specifically in `FinalDestination::Resolver`.
This change gives `FinalDestination::SSRFDetector` a new error class
to wrap the `SocketError` in, and haves the `RetrieveTitle` class
handle that error gracefully.
Currently the `turbo:spec` task will fail when encountering system
tests as Capypara tries to use the same port for each process.
This simple change uses the same strategy as for databases, by just
incrementing the port number by `TEST_ENV_NUMBER` for each process.
A few specs in `dashboard_controller_spec.rb` set some state in redis but don't clean it up afterwards which causes other specs to fail when they're ran after `dashboard_controller_spec.rb`.
Related commit: 18467d4.
We are all in on system specs, so this commit moves all the chat quoting acceptance tests (some of which have been skipped for a while) into system specs.
Honestly seems like it's being in some weird loop for
discourse/hashtag_autocomplete_spec.rb for this:
```ruby
within topic_page.post_by_number(2) do
cooked_hashtags = page.all(".hashtag-cooked", count: 2)
expect(cooked_hashtags[0]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{category.url}\" data-type=\"category\" data-slug=\"cool-cat\"><svg class=\"fa d-icon d-icon-folder svg-icon svg-node\"><use href=\"#folder\"></use></svg><span>Cool Category</span></a>
HTML
expect(cooked_hashtags[1]["outerHTML"]).to eq(<<~HTML.chomp)
<a class=\"hashtag-cooked\" href=\"#{tag.url}\" data-type=\"tag\" data-slug=\"cooltag\"><svg class=\"fa d-icon d-icon-tag svg-icon svg-node\"><use href=\"#tag\"></use></svg><span>cooltag</span></a>
HTML
end
```
I see this many times in the full logs with `SELENIUM_VERBOSE_DRIVER_LOGS=1`:
```
COMMAND FindElements {
"using": "css selector",
"value": "#post_2"
}
Followed by:
COMMAND FindChildElements {
"id": "26dfe542-659b-46cc-ac8c-a6c2d9cbdf0a",
"using": "css selector",
"value": ".hashtag-cooked"
}
```
Over and over and over, there are 58 such occurrences. I am beginning to
think `within` is just poison that should be avoided.
Featured topics are eventually serialized by `ListableTopicSerializer`
which calls `Topic#image_url` which requires us to preload
`Topic#topic_thumbnails`.
Previously, calling `sign_in` would cause the browser to be redirected to `/`, and would cause the Ember app to boot. We would then call `visit()`, causing the app to boot for a second time.
This commit adds a `redirect=false` option to the `/session/username/become` route. This avoids the unnecessary boot of the app, and leads to significantly faster system spec run times.
In local testing, this takes the full system-spec suite for chat from ~6min to ~4min.
At the time of writing, this is how the `TopicPosterSerializer` looks
like:
```
class TopicPosterSerializer < ApplicationSerializer
attributes :extras, :description
has_one :user, serializer: PosterSerializer
has_one :primary_group, serializer: PrimaryGroupSerializer
has_one :flair_group, serializer: FlairGroupSerializer
end
```
Within `PosterSerializer`, the `primary_group` and `flair_group`
association is requested on the `user` object. However, the associations
have not been loaded on the `user` object at this point leading to the
N+1 queries problem. One may wonder
why the associations have not been loaded when the `TopicPosterSerializer`
has `has_one :primary_group` and `has_one :flair_group`. It turns out that `TopicPoster`
is just a struct containing the `user`, `primary_group` and
`flair_group` objects. The `primary_group` and `flair_group`
ActiveRecord objects are loaded seperately in `UserLookup` and not preloaded when querying for
the users. This is done for performance reason so that we are able to
load the `primary_group` and `flair_group` records in a single query
without duplication.
We were adding to the resolver's work queue before setting up the `@lookup` and `@parent` information. That could lead to the lookup being performed on the wrong (or `nil`) hostname. This also lead to some flakiness in specs.
This test occasionally fails in CI. I haven't been able to reproduce the issue locally. This logging will print some extra information when the assertion fails.
We were using the `for_input: true` param when calling
DiscourseTagging, which is really meant for selecting tags
in the UI, which often need a parent tag selected first
before the child tags in tag group will show. We just
want to show all tags regardless of grouping in hashtag
search.`
It was redefining rather than including them. It was causing this warning:
```
WARNING: Shared example group suspension of active user possible was defined without a block and will have no effect. Please define a block or remove the definition
```
* DEV: Fix png optimization test flakyness
Update fixture with oxipng 7
This test broke when the pngoptimizer got better so the pre-optimized png in the fixtures was compressed further on upload creation, breaking the expected size.
We generally do not return muted child categories to the user
if they have muted the parent category, this commit respects that
rule for CategoryHashtagDataSource
* UX: Wizard Step Enhancements
- Remove illustrations
- Add Emoji graphic to top of steps
- Add description below step title
- Move point of contact to last step
* Move step count to header, plus some button navigation tweaks
* add remaining emoji to step headers
* fix button logic on steps
* Update Point of Contact
* remove automated messages field
* adjust styling for counter, title, and emoji
* Update wording for logos
* Fix tests
* fix prettier
* fix specs
* set same with for steps except for styling screen
* use sentence case; remove duplicate copy under your organization fields
* fix missing buttons on small screens
* add spacing to buttons; adjust font weight to labels
* adjust styling for community logo step; use sentence case for button
* update copy for point of contact text helper
* use sentence case for field labels
* fix ui tests
* use btn-back class to fix ui tests
* reduce bottom margin for toggle fields
* clean up
Co-authored-by: Ella <ella.estigoy@gmail.com>
* DEV: Skip push notifications for active online users
Currently, users with active push subscriptions get push notifications
regardless of their "presence" on the site.
This change introduces a `push_notification_time_window_mins`
site setting which is used in conjunction with a user's `last_seen_at` to
determine if push notifications should be sent. A user is considered to
be actively online if their `last_seen_at` is within `push_notification_time_window_mins`
minutes. `push_notification_time_window_mins` is set to 10 by default.
* DEV: Remove client param for push_notification_time_window_mins site setting
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
* UX: added fadeout + hashtag styling
UX: add full name to autocomplete
UX: autocomplete mentions styling
UX: emoji styling user status
UX: autocomplete emoji
* DEV: Move hashtag tag counts into new secondary_text prop
* FIX: Add is-online style to mention users via chat
UX: make is-online avatar styling globally available
* DEV: Fix specs
* DEV: Test fix
Co-authored-by: Martin Brennan <martin@discourse.org>
Follow up to a review in #18937, this commit changes the HashtagAutocompleteService to no longer use class variables to register hashtag data sources or types in context priority order. This is to address multisite concerns, where one site could e.g. have chat disabled and another might not. The filtered plugin registers I added will not be included if the plugin is disabled.
Previously, restricted category chat channel was available for all groups - even `readonly`. From now on, only user who belong to group with `create_post` or `full` permissions can access that chat channel.
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
In #15474 we introduced dedicated support for date ranges. As part of that
change we added a fallback of "magic" date ranges, which treats dates in
any paragraph with exactly two dates as a range. There were discussions
about migrating all such paragraphs to use the new date range element, but
it was ultimately decided against.
This change removes the fallback and, as a bonus, adds support for multiple
date ranges in the same paragraph.
We were changing the user's user_option.bookmark_auto_delete_preference
to whatever they changed it to in the bookmark modal to use as default
for future bookmarks. However this was leading to a lot of confusion
since if you wanted to set it for one bookmark you had to remember to
change it back on the next one.
This commit removes that automatic functionality, and instead moves
the bookmark auto delete preference to User Preferences > Interface
in an explicit dropdown.
This commit adds a new notification that gets sent to admins when the site gets new features after an upgrade/deploy. Clicking on the notification takes the admin to the admin dashboard at `/admin` where they can see the new features under the "New Features" section.
Internal topic: t/87166.
This introduces another "section" of queries to the
hashtag autocomplete search, which returns results for
each type that start with the search term. So now results
will be in this order, and within these sections ordered
by the types in priority order:
1. Exact matches sorted by type
2. "starts with" sorted by type
3. Everything else sorted by type then name within type
Depending on the current state of things, sometimes the homepage style
wouldn't update because we were incorrectly blocking updates the
`desktop_category_page_style` site setting if the first item in the top
menu was 'categories'.
Added a test case to handle this situation.
See https://meta.discourse.org/t/248354
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
When user is watching category or tag (watching or watching first post) notifications are moved to other tab.
To achieve that and distinguish between post create to directly watched topics and indirectly watched topics, new notification type called `watching_category_or_tag` was introduced.
Fixes an issue on mobile where navigating away from search and returning
results in confusing UI where there are no results but headings says "N
results found".
The guardian is useful for plugins to determine if the callback should
do anything. A common use case is to not do anything in the callback if
the user is anonymous.
* FEATURE: Add chat and sidebar toggles to the setup wizard
- Fix css alighnment
- Add Enable Chat Toggle
- Add Enable Sidebar Toggle
* Check for the chat plugin
* Account for new sidebar step
* update chat and sidebar description
* UI: add checkmark as a visual indicator that it is enabled
* use new navigation_memu site setting for enabling the sidebar
* fix tests
* Add tests
* Update lib/wizard/step_updater.rb
Use HEADER_DROPDOWN instead of LEGACY
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Fix spec. Use HEADER_DROPDOWN instead of LEGACY
Co-authored-by: Ella <ella.estigoy@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The tsquery used for searching is generated using both functions from
Ruby and Postgresql (for example, unaccent function). Depending on the
term used, it generated an invalid tsquery. For example "can’t"
generated "''can''t''" instead of "''can''''t''".
binding.pry gives a nicer syntax-highlighted environment
and better formatting for inspecting objects, and we still
have the byebug continue/step/next commands (which you can
also alias via .pryrc) via the pry-byebug gem
This ensures that all system tests are starting from a clean state and
not leak state between requests. Note that we have to simplify flush the
Redis db here because it is not pratical to manually clean up Redis keys
in system tests.
Will make your test run in an emulated iPhone 12 Pro view. It means you can now use `click(delay: 0.5)` to emulate some long press or that `mobile_view=1` will be set automatically.
Usage:
```
it "works", mobile: true do
visit("/")
end
```
Note: `window-size=390,950` is different than native iPhone 12 Pro size, but due to minimum browser size and the automated browser alert at the top of the view, this was the best size I could find.
I have tried running these multiple times locally and on CI with the exact same seed as a failing one and without that seed too, also with these individual specs split into their own PRs. Nothing is failing, so I don't really know what else I can do if there is no consistent reproduction, so re-enabling for now.
This sometimes got the Uncategorized category and
sometimes not, because it also had a topic count
of 0 same as the "fun" category. Giving the "fun"
category a higher count will fix the issue.
* FIX: Use Category.secured(guardian) for hashtag datasource
Follow up to comments in #19219, changing the category
hashtag datasource to use Category.secured(guardian) instead
of Site.new(guardian).categories here since the latter does
more work for not much benefit, and the query time is the
same. Also eliminates some Hash -> Model back and forth
busywork. Add some more specs too.
* FIX: Server-side hashtag lookup cooking user loading
When we were using the PrettyText.options.currentUser
and parsing back and forth with JSON for the hashtag
lookups server-side, we had a bug where the user's
secure categories were not loaded since we never actually
loaded a User model from the database, only parsed it
from JSON.
This commit fixes the issue by instead using the
PretyText.options.userId and looking up the user directly
from the database when calling hashtag_lookup via the
PrettyText::Helpers code when cooking server-side. Added
the missing spec to check for this as well.
* FEATURE: Show similar users when penalizing a user
Moderators will be notified if other users with the same IP address
exist before penalizing a user.
* FEATURE: Allow staff to penalize multiple users
This allows staff members to suspend or silence multiple users belonging
to the same person.
This helper is intended only for dev purposes. It allows you to pause a test while still being able to interact with the browser.
Usage:
```
it "works" do
visit("/")
pause_test
expect(page).to have_css(".foo")
end
```
If configured, this will be used for static JS assets which are stored on S3. This can be useful if you want to use different CDN providers/configuration for Uploads and JS
This commit allows us to type # in the UI and present autocomplete
results immediately with the following logic for the topic composer,
and reversed for the chat composer:
* Categories the user can access and has not muted sorted by `topic_count`
* Tags the user can access and has not muted sorted by `topic_count`
* Chat channels the user is a member of sorted by `messages_count`
So in effect, we allow searching for hashtags without a search term.
To do this we add a new `search_without_term` to each data source so
each one can define how it wants to handle this logic.
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
When looking up hashtags which were conflicting (e.g.
management::tag and management) where the user did
not have permission for one of them, we ended up returning
the one they did have permission to (e.g. the tag) twice
because of the way the lookup fallback code worked. This
fixes the issue, and another related one where the
::type was not added to the found item's .ref, and
so the hashtag replacement on the client was not working
correctly.
In this PR, we introduced an option, that when all authenticators are disabled, but backup codes still exists, user can authenticate with those backup codes. This was reverted as this is not expected behavior.
https://github.com/discourse/discourse/pull/18982
Instead, when the last authenticator is deleted, backup codes should be deleted as well. Because this disables 2fa, user is asked to confirm that action by typing text.
In addition, UI for 2fa preferences was refreshed.
* FIX: Save only visible fields from the sidebar page
* FIX: Do not reset seen popups when set to false
If the option was unchecked, but it was not changed at all by the user
it was still sent to the server as a 'false' value which reset all seen
popups. This removes that behavior and resetting the list of seen popups
must be done using the "skip new user tips" button.
The default behavior for Rails is to vary the response of an endpoint based on the `Accept:` header, and therefore it returns a `Vary:` header on responses. This instructs browsers and intermediate proxies to key their caches based on the value of the request's `Accept` header. In some cases (e.g. Akamai), the presence of a `Vary` header is enough to prevent caching entirely.
This commit restructures the Rails route definitions so that:
1. The "format" segment of the route is 'required'
2. The "format" segment of the route is constrained to a single value (e.g. `js` or `css`)
Now that the routes are guaranteed to have a `:format` segment, Rails will always prioritize that over the `Accept` header, and will therefore omit the `Vary` header.
Request specs are also added to test this behaviour for both stylesheets and theme-javascripts.
When finding the candidates for `Topic.similar_to`, we will now ignore
topics in categories where `Category#search_priority` has been set to
ignore and also topics in categories which the user has specifically
muted.
Internal Ref: /t/87132
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
When a screened IP address is matched because it is either blocked or
allowed it should update match_count. This did not work because it
tried to validate the IP address and it failed as it matched with
itself.
Previously we would trigger the event before the `Topic#deleted_at`
column has been updated making it hard for plugins to correctly work
with the model when its new state has not been persisted in the
database.
* FIX: Only modify secured sidebar links on user promotion/demotion
If a user is created populate their sidebar with the default
categories/tags that they have access to.
If a user is promoted to admin populate any new categories/tags that
they now have access to.
If an admin is demoted remove any categories/tags that they no longer
have access to.
This will only apply for "secured" categories. For example if these are
the default sitebar categories:
- general
- site feedback
- staff
and a user only has these sidebar categories:
- general
when they are promoted to admin they will only receive the "staff"
category. As this is a default category they didn't previously have
access to.
* Add spec, remove tag logic on update
Change it so that if a user becomes unstaged it used the "add" method
instead of the "update" method because it is essentially following the
on_create path.
On admin promotion/demotion remove the logic for updating sidebar tags because
we don't currently have the tag equivalent like we do for User.secure_categories.
Added the test case for when a user is promoted to admin it should
receive *only* the new sidebar categories they didn't previously have
access to. Same for admin demotion.
* Add spec for suppress_secured_categories_from_admin site setting
* Update tags as well on admin promotion/demotion
* only update tags when they are enabled
* Use new SidebarSectionLinkUpdater
We now have a SidebarSectionLinkUpdater
that was introduced in: fb2507c6ce
* remove empty line
* FEATURE: Show warning if group cannot be mentioned
A similar warning is displayed when the user cannot be mentioned because
they have not been invited to the topic.
* FEATURE: Resolve mentions for new topic
This commit improves several improvements and refactors
/u/is_local_username route to a better /composer/mentions route that
can handle new topics too.
* FEATURE: Show warning if only some are notified
Sometimes users are still notified even if the group that was mentioned
was not invited to the message. This happens because its members were
invited directly or are members of other groups that were invited.
* DEV: Refactor _warnCannotSeeMention
User options were serialized at the root level of CurrentUserSerializer,
but UserSerializer has a user_option field. This inconsistency caused
issues in the past because user_option fields had to be duplicated on
the frontend.
When uploads are stored on S3, by default Discourse will fetch the avatars and proxy them through to the requesting client. This is simple, but it can lead to significant inbound/outbound network load in the hosting environment.
This commit adds an optional redirect_avatar_requests GlobalSetting. When enabled, requests for user avatars will be redirected to the S3 asset instead of being proxied. This adds an extra round-trip for clients, but it should significantly reduce server load. To mitigate that extra round-trip for clients, a CDN with 'follow redirect' capability could be used.
Update failing spec which previously used non-staff user to create
hidden posts.
Also add new spec for non-staff use cases to prevent future
regressions.
In some cases (e.g. user notification emails) we
are passing an excerpted/stripped version of the
post HTML to Email::Styles, at which point the
<span> elements surrounding the hashtag text have
been stripped. This caused an error when trying to
remove that element to replace the text.
Instead we can just remove all elements inside
a.hashtag-cooked and replace with the raw #hashtag
text which will work in more cases.
The centralization helps in reducing code duplication in our code base
and more importantly, centralizing logic for guardian checks into a
single spot.
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
This PR adds separate notification indicators for PMs and reviewables that have arrived since the last time the user opened the notifications menu.
The PM indicator is the strongest one of all three indicators followed by the reviewable indicator and then finally the blue indicator. This means that if there's a new PM and a new reviewable, then the PM indicator will be shown.
Meta topic: https://meta.discourse.org/t/no-green-or-red-notification-bubbles/242783?u=osama.
Internal topic: t/82995.
Fixes broken behaviour of arrow buttons for certain users as the interval to scroll menu can be cancelled before the scrolling actually happens.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This is closer to git's redirect following behaviour. We prevented git
following redirects when we clone in order to prevent SSRF attacks.
Follow-up-to: 291bbc4fb9
While load testing our user creation code path in production, we
identified that executing the DB statement to update the `Group#user_count` column within a
transaction is creating a bottleneck for us. This is because the
creation of a user and addition of the user to the relevant groups are
done in a transaction. When we execute the DB statement to update
`Group#user_count` for the relevant group, a row level lock is held
until the transaction completes. This row level lock acts like a global
lock when the server is creating users that will be added to the same
group in quick succession.
Instead of updating the counter cache within a transaction which the
default ActiveRecord `counter_cache` option does, we simply update the
counter cache outside of the committing transaction.
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
When doing local oneboxes we sometimes want to allow
SVGs in the final preview HTML. The main case currently
is for the new cooked hashtags, which include an SVG
icon.
SVGs will be included in local oneboxes via `ExcerptParser` _only_
if they have the d-icon class, and if the caller for `post.excerpt`
specifies the `keep_svg: true` option.
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
This commit introduce a new API for registering callbacks, which we'll execute when a user gets destroyed, and the `delete_posts` opt is true. The chat plugin registers one callback and queues a job to destroy every message from that user in batches.
When searching for categories it is possible for
a child category to have a slug that matches the term
exactly, but will not be found by .lookup since we
don't return these categories unless the ref matches
parent:child.
Introduces a search_sort method to each hashtag data
source so they can provide their custom sort logic of
results, in category's case putting all matching slugs
to the top regardless of parent/child relationship
then sorting by text.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
Previously we would unconditionally fetch all images via HTTP to grab
original sizing from cooked post processor in 2 different spots.
This was wasteful as we already calculate and cache this info in upload records.
This also simplifies some specs and reduces use of mocks.
I'm hesitant to call this a performance improvement since claiming a
reviewable is probably rare. However, this commit cuts out two DB
queries each time we have to publish a reviewable claimed message. More
importantly, publishing to groups scales much better than publishing to
users because we esstentially cap the number ids we have to load into
memory.
The `decodedMap` prop comes from https://github.com/terser/terser/pull/1190
> This also exposes a new `decodedMap` property on the result object. Decoded maps are free to create (it's a shallow clone of the `GenMapping` instance), and passing them to `@jridgewell/trace-mapping` is copy-free. With Babel [recently](https://github.com/babel/babel/pull/14497) adding a `decodedMap` field, a dev could pass from the Babel transpilation to Terser without any added memory use for sourcemaps.
This adds API scope for the user status. This also adds a get method to the user status controller. We didn't need a dedicated method that returns status before because the server returns status with user objects, but I think we need to provide this method for API clients.
Raw paths like `/test/path` are not supported natively in the CSP. This commit prepends the site's base URL to these paths. This allows plugins to add 'local' assets to the CSP without needing to hardcode the site's hostname.
This changes the hashtag search to first do a lookup to find
results where the slug exactly matches the
search term. Now when we search for hashtags, the
exact matches will be found first and put at the top of
the results.
`ChatChannelFetcher` has also been modified here to allow
for more options for performance -- we do not need to
query DM channels for secured IDs when looking up or searching
channels for hashtags, since they should never show in
results there (they have no slugs). Nor do we need to include
the channel archive records.
Also changes the limit of hashtag results to 20 by default
with a hidden site setting, and makes it so the scroll for the
results is overflowed.
In this PR, we're making sure when a theme upload which is used in the theme's CSS is missing it won't break the stylesheet precompilation process. See also: 6ebd2cecda
Adds the description as a title="" attribute on the hashtag
autocomplete search items for tags, categories, and channels.
These descriptions can be seen by the user since they are
able to see the results that are returned by the search via
Guardian checks.
This fix changes the hashtag-raw hashtags, which are
the ones that do not actually match anything, back
to the old style which does not look like mentions.
The user attributes are not updated between clients and that is a
problem with user tips because the same user tip will be displayed
multiple times, once for every client.
This will be used by plugins to handle the client side of their custom
post validations without having to overwrite the whole composer save
action as it was done in other plugins.
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
The tag ordering was inconsistent, because we were not
passing the correct order option to DiscourseTagging.filter_allowed_tags.
The order would change based on the limit provided. Now,
we can have a consistent order which is term exact match -> topic count ->
name.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
* FEATURE: API to update user's discourse connect external id
This adds a special handling of updates to DiscourseConnect external_id
in the general user update API endpoint.
Admins can create, update or delete a user SingleSignOn record using
PUT /u/:username.json
{
"external_ids": {
"discourse_connect": "new-external-id"
}
}
The hidden site setting `suppress_secured_categories_from_admin` will
suppress visibility of categories without explicit access from admins
in a few key areas (category drop downs and topic lists)
It is not intended to be a security wall since admins can amend any site
setting. Instead it is feature that allows hiding the categories from the
UI.
Admins will still be able to see topics in categories without explicit
access using direct URLs or flags.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
When opening the invite acceptance page when the user
was already logged in, we were still showing the Accept
Invitation prompt even if the user had already redeemed
the invitation and was present in the `InvitedUser` table.
This would lead to errors when the user clicked on the button.
This commit fixes the issue by hiding the Accept Invitation
button and showing an error message instead indicating that
the user had already redeemed the invitation. This only applies
to multi-use invite links.
The problem was reported as a problem with changing theme in user preferences, after saving a new theme the previously set user status was disappearing (https://meta.discourse.org/t/user-status/240335/42). Turned out though that the problem was more wide, changing pretty much any setting in user preferences apart from user status itself led to clearing the status.
* FEATURE: Default Composer Category Site Setting
- Create the default_composer_category site setting
- Replace general_category_id logic for auto selecting the composer
category
- Prevent Uncategorized from being selected if not allowed
- Add default_composer_category option to seeded categories
- Create a migration to populate the default_composer_category site
setting if there is a general_category_id populated
- Added some tests
* Add missing translation for the new site setting
* fix some js tests
* Just check that the header value is null
This commit adds some protections in InviteRedeemer to ensure that email
can never be nil, which could cause issues with inviting the invited
person to private topics since there was an incorrect inner join.
If the email is nil and the invite is scoped to an email, we just use
that invite.email unconditionally. If a redeeming_user (an existing
user) is passed in when redeeming an email, we use their email to
override the passed in email. Otherwise we just use the passed in
email. We now raise an error after all this if the email is still nil.
This commit also adds some tests to catch the private topic fix, and
some general improvements and comments around the invite code.
This commit also includes a migration to delete TopicAllowedUser records
for users who were mistakenly added to topics as part of the invite
redemption process.
Currently, moderators are able to set primary group for users
irrespective of the of the `moderators_manage_categories_and_groups` site
setting value.
This change updates Guardian implementation to honour it.
Currently, we have available three 2fa methods:
- Token-Based Authenticators
- Physical Security Keys
- Two-Factor Backup Codes
If the first two are deleted, user lose visibility of their backup codes, which suggests that 2fa is disabled.
However, when they try to authenticate, the account is locked, and they have to ask admin to fix that problem.
This PR is fixing the issue. User still sees backup codes in their panel and can use them to authenticate.
In next PR, I will improve UI to clearly notify the user when 2fa is fully disabled and when it is still active.
* Remove old bookmark column ignores to follow up b22450c7a8
* Change some group site setting checks to use the _map helper
* Remove old secure_media helper stub for chat
* Change attr_accessor to attr_reader for preloaded_custom_fields to follow up 70af45055a
It is likely that a new admin user was created as just a regular user
before being promoted to admin so this change will update the sidebar
link records for any users that are promoted to admin. This way if any
of the default side bar categories or tags are restricted to admins
these new admins will have those added to their sidebar as well.
You can easily replicate this issue locally (prior to this fix) by using
`rails admin:create` where it creates a user first, then it is promoted
to admin. This means it would receive the default categories of regular
user, but never receive the ones they should have access to as an admin.
As part of this change I did drop the `!` from
`SidebarSectionLink.insert_all` so that it would add any new records
that were missing, but not throw a unique constraint error trying to add
any existing records.
Follow up to: 1b56a55f50
And: e320bbe513
Previously the stylesheet cachebusting hash was based on the maximum mtime of files. This works well in development and during in-container updates (e.g. via docker_manager). However, when a fresh docker image is created for each deploy, the file mtimes will change even if the contents has not.
This commit changes the production logic to calculate the cachebuster from the filenames and contents of the relevant assets. This should be consistent across deploys, thereby improving cache hits and improving page load times.
Meta topic: https://meta.discourse.org/t/meta-theme-color-is-not-respecting-current-color-scheme/239815
Currently, the dark mode theme-color `<meta>` tag doesn't apply because the light mode tag has `media="all"`. This means that the dark mode `<meta>` tag with `media="(prefers-color-scheme: dark)"` won't override it. This PR updates the light mode tag to `media="(prefers-color-scheme: light)"` if `dark_scheme_id` is defined and leaves it as `media="all"` otherwise.
Since the system user is a regular user, it can have its
`allow_private_messages` user option turned off, which
with our current `can_send_private_message?(Discourse.system_user)`
check inside the CurrentUserSerializer, will prevent any
user from sending messages in the UI if the system user is not
accepting PMs.
This commit adds a new `can_send_private_messages?` method to
the Guardian, which can be used in serializers and not depend
on the system user. When the user actually sends a message
we still rely on the old `can_send_private_message?(target)`
call to see if they are allowed to send the message to the target.
The new method is just to say they can "generally" send
private messages.
Previously, we didn't have a site-wide setting to set the default behavior for user profile visibility and user presence features. But we already have a user preference for that.
Depends on: #18806
We have a banner that prompts to edit the welcome topic, so let's not
show it in the topic list until it has been edited. Previously this
banner covered the welcome topic, now the banner will be above the topic
list, so we need to hide the welcome topic.
* DEV: Add a dedicated Admin::StaffController base controller
The current parent(Admin:AdminController) for all admin-related controllers
uses a filter that allows only staff(admin, moderator) users.
This refactor makes Admin::AdminController filter for only admins as the name suggests and
introduces a base controller dedicated for staff-related endpoints.
* DEV: Set staff-only controllers parent to Admin::StaffController
Refactor staff-only controllers to inherit newly introduced
Admin::StaffController abstract controller. This conveys the
purpose of the parent controller better unlike the previously used parent
controller.
* FIX: Follow up fixes for password-reset error page
Pass in `base_url` to the template
Use `.html_safe` since the message now contains html
Follow up to: 9b1536fb83
* Update specs to pass in the base_url
This commit fixes a regression introduced in 8979adc where under certain conditions the groups syncing logic in Discourse Connect would try to add users to groups they're already members of and cause errors when users try to sign in using Discourse Connect.
Before this commit, we did not have guardian checks in place to determine if a
topic's title associated with a user badge should be displayed or not.
This means that the topic title of topics with restricted access
could be leaked to anon and users without access if certain conditions
are met. While we will not specify the conditions required, we have internally
assessed that the odds of meeting such conditions are low.
With this commit, we will now apply a guardian check to ensure that the
current user is able to see a topic before the topic's title is included
in the serialized object of a `UserBadge`.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Before this commit, there was no way for us to efficiently check an
array of topics for which a user can see. Therefore, this commit
introduces the `TopicGuardian#can_see_topic_ids` method which accepts an
array of `Topic#id`s and filters out the ids which the user is not
allowed to see. The `TopicGuardian#can_see_topic_ids` method is meant to
maintain feature parity with `TopicGuardian#can_see_topic?` at all
times so a consistency check has been added in our tests to ensure that
`TopicGuardian#can_see_topic_ids` returns the same result as
`TopicGuardian#can_see_topic?`. In the near future, the plan is for us
to switch to `TopicGuardian#can_see_topic_ids` completely but I'm not
doing that in this commit as we have to be careful with the performance
impact of such a change.
This method is currently not being used in the current commit but will
be relied on in a subsequent commit.
Meta topic: https://meta.discourse.org/t/meta-theme-color-is-not-respecting-current-color-scheme/239815/7?u=osama.
This commit renders an additional `theme-color` `<meta>` tag for the dark scheme if the current user/request has a scheme selected for dark mode. We currently only render one `theme-color` tag which is always based on the user's selected scheme for light mode, but if the user also selects a scheme for dark mode and uses a device that's configured to use/prefer dark mode, the Discourse UI will be in dark mode, but any parts of the browser/OS UI that's colored based on the `theme-color` tag, would use a color from the user's selected light scheme and look inconsistent with the Discourse UI because the `theme-color` tag is based on the user's selected light scheme.
The additional `theme-color` tag has `media="(prefers-color-scheme: dark)"` and is based on the user's selected dark scheme which means any browser UI that's colored based on `theme-color` tags should be able to pick the right tag based on the user's preference for light/dark mode.
The `active` param on the create user endpoint requires that an api key
is used in the request header otherwise it is ignored, so adding this
distinction to the api docs.
Related to aeee7ed.
Before the change in aeee7ed, notifications for direct replies to your posts and notifications for replies in watched topics looked the same in the notifications menu -- they both used the arrow icon.
We decided in aeee7ed to distinguish them by changing "watched topics" notifications to use the bell icon because it was confusing for users who watch topics to see the same icon for direct replies and "watched topics". However, that change also means that non-power/new users who receive replies to topics _they create_ will get notifications with the bell icon because technically they're watching the topic, but the arrow icon is more appropriate for this case because we use it throughout the app to indicate "replies".
This commit adds a special-case so that if a user is watching a topic AND the topic is created by them, they receive notifications with the arrow icon (type `replied`) instead of the bell icon (type `posted`) for new posts in the topic.
Internal topic: t/79051.
Discourse Connect can be used to manage group memberships of users by including a `add_groups`, `remove_groups` or `groups` attribute in the Discourse Connect payload. However, additions/deletions of users from groups aren't logged to the groups logs (available at `/g/<group>/manage/logs`) which can cause confusions to admins they try to figure out when/how users were added or removed from a group. This commit makes Discourse Connect add entries to the groups logs when it makes changes to users' group memberships.
This test flakes occassionally, possibly because
of the arg ordering which we do not guarantee.
In future if this keeps occurring we may want to
try make expect_enqueued_with not care about argument
orders or the order of arrays etc within those arguments.
Adds sorting for the HashtagAutocompleteService to
sort the results by case-insensitive text _within_
the type sort order specified by the params. This
should fix some flaky specs as well.
Linking a commit from a GitHub pull request included the complete commit
message, instead of just the first line. The rest of the commit message
will be added to the body of the Onebox.
Building does not persist the object in the database which is
unrealistic since we're mostly dealing with persisted objects in
production.
In theory, this will result our test suite taking longer to run since we
now have to write to the database. However, I don't expect the increase
to be significant and it is actually no different than us adding new
tests which fabricates more objects.
Alan Guo Xiang Tan
Sérgio Saquetim
David Taylor
Bianca Nenciu
Régis Hanol
Martin Brennan
Selase Krakani
Loïc Guitaut
Ted Johansson
Sam
Blake Erickson
Jarek Radosz
Matt Marjanović
Jamie Wilson
Vinoth Kannan
Osama Sayegh
Roman Rizzi
Jan Cernik
Joffrey JAFFEUX
Isaac Janzen
Gerhard Schlager
Andrei Prigorshnev
Natalie Tay
Rafael dos Santos Silva
Krzysztof Kotlarek
Penar Musaraj
Daniel Waterworth
dependabot[bot]
chapoi
Ryan Vandersmith
Wolftallemo
Ayke Halder
Meghna
Du Jiajun
kaden-stytch