* FIX: Video thumbnails can have duplicates
It's possible that a duplicate video or even a very similar video could
generate the same video thumbnail. Because video thumbnails are mapped
to their corresponding video by using the video sha1 in the thumbnail
filename we need to allow for duplicate thumbnails otherwise even when a
thumbnail has been generated for a topic it will not be mapped
correctly.
This will also allow you to re-upload a video on the same topic to
regenerate the thumbnail.
* fix typo
This commit makes some fundamental changes to how hashtag cooking and
icon generation works in the new experimental hashtag autocomplete mode.
Previously we cooked the appropriate SVG icon with the cooked hashtag,
though this has proved inflexible especially for theming purposes.
Instead, we now cook a data-ID attribute with the hashtag and add a new
span as an icon placeholder. This is replaced on the client side with an
icon (or a square span in the case of categories) on the client side via
the decorateCooked API for posts and chat messages.
This client side logic uses the generated hashtag, category, and channel
CSS classes added in a previous commit.
This is missing changes to the sidebar to use the new generated CSS
classes and also colors and the split square for categories in the
hashtag autocomplete menu -- I will tackle this in a separate PR so it
is clearer.
* FIX: Fix for Default to subcategory when parent category does not allow posting
* added tests for edge case scenario
* implemented correct behaviour when parent category doesn't have subcategories
* implemented new fabricator for categories and suggested changes
https://meta.discourse.org/t/improving-mailman-email-parsing/253041
When mirroring a public mailling list which uses mailman, there were some cases where the incoming email was not associated to the proper user.
As it happens, for various (undertermined) reasons, the email from the sender is often not in the `From` header but can be in any of the following headers: `Reply-To`, `CC`, `X-Original-From`, `X-MailFrom`.
It might be in other headers as well, but those were the ones we found the most reliable.
The welcome topic user tip was for admins only, but in general, user
tips should be used for guiding new users through the features that
Discourse offers. For this reason, we decided to remove the user tip.
This commit also includes a few more copy tweaks to the welcome topic.
The old method updated only existing records, without considering that
new tags might have been created or some tags might not exist anymore.
This was usually not a problem because the stats were also updated by
other code paths.
However, the ensure consistency job should be more solid and help when
other code paths fail or after importing data.
Also, update category tag stats too should happen when updating other
category stats as well.
When uploading images via direct to S3 upload, we were
assuming that we could not pre-emptively check the file
size because the client may do preprocessing to reduce
the size, and UploadCreator could also further reduce the
size.
This, however, is not true of gifs, so we would have an
issue where you upload a gif > the max_image_size_kb
setting and had to wait until the upload completed for
this error to show.
Now, instead, when we direct upload gifs to S3, we check
the size straight away and present a file size error to
the user rather than making them wait. This will increase
meme efficiency by approximately 1000%.
Currently processing emails that are blank or have a nil value for the mail will cause several errors.
This update allows emails with blank body or missing sender to log the blank email error to the mail logs rather than throwing an error.
- Improves styleguide support
- Adds toggle color scheme to styleguide
- Adds properties mutators to styleguide
- Attempts to quit a session as soon as done with it in system specs, this should at least free resources faster
- Refactors fabricators to simplify them
- Adds more fabricators (uploads for example)
- Starts implementing components pattern in system specs
- Uses Chat::Message creator to create messages in system specs, this should help to have more real specs as the side effects should now happen
### What is this change?
The lounge category was replaced with the general category in https://github.com/discourse/discourse/pull/18097.
However, there are still a few references to the lounge category in code. In particular, `Category#seeded?` is erroring out in production looking for `SiteSetting.lounge_category_id`.
What is the problem?
In `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search`, the controller actions
was using the `RailsMultisite::ConnectionManagement.with_hostname` API
but `params[:hostname]` was always `nil` because the routes does not
have a `:hostname` param component and the client does not ever pass the
`:hostname` param when making the request. When `RailsMultisite::ConnectionManagement.with_hostname` is
used with a `nil` argument, it ends up connecting to the default
multisite database. Usually this would be bad because we're allowing a
site in a multisite setup to connect to another site but thankfully no
private data is being leaked here.
What is the fix?
Since `SvgSpriteController#search` and `SvgSpriteController#icon_picker_search` are login required route,
there is no need for us to switch database connections. The fix here is
to simply remove the use of `RailsMultisite::ConnectionManagement.with_hostname`.
* FIX: Displaying the wrong number of minimum tags in the composer
When the minimum number of tags set for the category is larger than the minimum number of tags
set in the category tag-groups, the composer was displaying the wrong value.
This commit fixes the value displayed in the composer to show the max value between the required
for the category and the tag-groups set for the category.
This bug was reported on Meta in https://meta.discourse.org/t/tags-from-multiple-tag-groups-required-only-suggest-select-at-least-one-tag/263817
* FIX: Limiting tags in categories not working as expected
When a category was restricted to a tag group A, which was set to only allow
one tag from the group per topic, selecting a tag belonging only to A returned
other tags from A that also belonged to other group/s (if any).
Example:
Tag group A: alpha, beta, gamma, epsilon, delta
Tag group B: alpha, beta, gamma
Both tag groups set to only allow one tag from the group per topic.
If Category 1 was set to only allow tags from the tag group A, and the first tag
selected was epsilon, then, because they also belonged to tag group B, the tags
alpha, beta, and gamma were still returned as valid options when they should not be.
This commit ensures that once a tag from a tag group that restricts its tags to
one per topic is selected, no other tag from this group is returned.
This bug was reported on Meta in https://meta.discourse.org/t/limiting-tags-to-categories-not-working-as-expected/263143.
* FIX: Moving topics does not prompt to add required tag for new category
When a topic moved from a category to another, the tag requirements
of the new category were not being checked.
This allowed a topic to be created and moved to a category:
- that limited the tags to a tag group, with the topic containing tags
not allowed.
- that required N tags from a tag group, with the topic not containing
the required tags.
This bug was reported on Meta in https://meta.discourse.org/t/moving-tagged-topics-does-not-prompt-to-add-required-tag-for-new-category/264138.
* FIX: Editing topics with tag groups from parents allows incorrect tagging
When there was a combination between parent tags defined in a tag group
set to allow only one tag from the group per topic, and other tag groups
relying on this restriction to combine the children tag types with the
parent tag, editing a topic could allow the user to insert an invalid
combination of these tags.
Example:
Automakers tag group: landhover, toyota
- group set to limit one tag from the group per topic
Toyota models group: land-cruiser, hilux, corolla
Landhover models group: evoque, defender, discovery
If a topic was initially set up with the tags toyota, land-cruiser it was
possible to edit it by removing the tag toyota and adding the tag landhover
and other landhover model tags like evoque for example.
In this case, the topic would end up with the tags toyota, land-cruiser,
landhover, evoque because Discourse will automatically insert the
missing parent tag toyota when it detects the tag land-cruiser.
This combination of tags would violate the restriction specified in
the Automakers tag group resulting in an invalid combination of tags.
This commit enforces that the "one tag from the group per topic"
restriction is verified before updating the topic tags and also
make sure the verification checks the compatibility of parent tags that
would be automatically inserted.
After the changes, the user will receive an error similar to:
The tags land-cruiser, landhover cannot be used simultaneously.
Please include only one of them.
Watched words were converted to regular expressions containing \W, which
handled only ASCII characters. Using [^[:word]] instead ensures that
UTF-8 characters are also handled correctly.
TopicsFilter is meant to generate a query scope from a given string so
we don't really need to ensure any ordering outside of the supported
order filters.
* Color for turbo_rspec in CI (`progress` and `documentation` formats)
* Show "DONE" only when `documentation` formatter is used
* Fix formatting
* Collapse RSpec commands
* Add line wrapping to the `progress` formatter (to mitigate GH Actions issue)
- Update welcome topic copy
- Edit the welcome topic automatically when the title or description changes
- Remove “Create your Welcome Topic” banner/CTA
- Add "edit welcome topic" user tip
### What is the problem?
It is possible to pass an arbitrary value to the limit parameter in `TagsController#search`, and have it flow through `DiscourseTagging.filter_allowed_tags` where it will raise an error deep in the database driver. MiniSql ensures there's no injection happening, but that ultimately results in an invalid query.
### How does this fix it?
This change checks more strictly that the parameter can be cleanly converted to an integer by replacing the loose `#to_i` conversion semantics with the stronger `Kernel#Integer` ones.
**Example:**
```ruby
"1; SELECT 1".to_i
#=> 1
Integer("1; SELECT 1")
#=> ArgumentError
```
As part of the change, I also went ahead to disallow a limit of "0", as that doesn't seem to be a useful option. Previously only negative limits were disallowed.
### Background
When SSRF detection fails, the exception bubbles all the way up, causing a log alert. This isn't actionable, and should instead be ignored. The existing `rescue` does already ignore network errors, but fails to account for SSRF exceptions coming from `FinalDestination`.
### What is this change?
This PR does two things.
---
Firstly, it introduces a common root exception class, `FinalDestination::SSRFError` for SSRF errors. This serves two functions: 1) it makes it easier to rescue both errors at once, which is generally what one wants to do and 2) prevents having to dig deep into the class hierarchy for the constant.
This change is fully backwards compatible thanks to how inheritance and exception handling works.
---
Secondly, it rescues this new exception in `UserAvatar.import_url_for_user`, which is causing sporadic errors to be logged in production. After this SSRF errors are handled the same as network errors.
This fixes a bug in the create invite API where if you passed in an
integer for the group_ids field it would fail to add the user to the
specified group.
added site toggle functionality through site settings
added tests to implemented feature
Introduced suggested correction
renamed find_new_topic method and deleted click_new_topic_button method
After this change, in order to join a chat channel, a user needs to be in a group with at least “Reply” permission for the category. If the user only has “See” permission, they are able to preview the channel, but not join it or send messages. The auto-join function also follows this new restriction.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
We were giving topics with repeated words extra weight in search index.
This meant that it was trivial to stuff words into title to dominate in search
given we search for exact title matches first.
The following tweak means that:
`invite invited invites`
and
`invite some stuff`
Both rank the same for title searching.
Titles are short and punchy, duplicating words should not give special
weight.
Requires a full reindex to take effect.
This fixes the api documentation for the create invite api endpoint so
that it uses the `group_ids` param when specifying the group instead of
the incorrect `group_id` param.
This commit fixes an issue where the Likes Received notification
count in the user digest email was not affected by the
since/last_seen date for the user, which meant that no matter
how long it had been since the user visited the count was
always constant.
Now instead for the Likes Received count, we only count the
unread notifications of that type since the user was last
seen.
The current limit (250 characters) is too low, as we have some
translations used for our badge descriptions that result in a
description length of 264 characters.
To be on the safe side, the limit is now set to 500 characters.
A category's slug can be encoded when
`SiteSetting.slug_generation_method` has been set to "encoded". As a
result, we have to support non ASCII characters as well.
This commit adds support for excluding categories when using the
`category:` filter with the `-` prefix. For example,
`-category:category-slug` will exclude all topics that belong to the
category with slug "category-slug" and all of its sub-categories.
To only exclude a particular category and not all of its sub-categories,
the `-` prefix can be used with the `=` prefix. For example,
`-=category:category-slug` will only exclude topics that belong to the
category with slug "category-slug". Topics in the sub-categories of
"category-slug" will still be included.
This amends it so our cached counting reliant specs run in synchronize mode
When running async there are situations where data is left over in the table
after a transactional test. This means that repeat runs of the test suite
fail.
What is the problem?
We are relying on RSpec custom matchers in system tests by defining
predicates in page objects. The problem is that this can result in a
system test unnecessarily waiting up till the full duration of
Capybara's default wait time when the RSpec custom matcher is used with
`not_to`. Considering this topic page object where we have a `has_post?`
predicate defined.
```
class Topic < PageObject
def has_post?
has_css?('something')
end
end
```
The assertion `expect(Topic.new).not_to have_post` will end up waiting
the full Capybara's default wait time since the RSpec custom matcher is
calling Capybara's `has_css?` method which will wait until the selector
appear. If the selector has already disappeared by the time the
assertion is called, we end up waiting for something that will never
exists.
This commit fixes such cases by introducing new predicates that uses
the `has_no_*` versions of Capybara's node matchers.
For future reference, `to have_css` and `not_to have_css` is safe to sue
because the RSpec matcher defined by Capbyara is smart enough to call
`has_css?` or `has_no_css?` based on the expectation of the assertion.
Specifying more than two tag names when using the `tag:` filter was not
working because of a bug in the code where only the first two value in
the `tag:` filter was being selected.
What is the problem?
Consider the following timeline:
1. OP starts a topic.
2. Troll responds snarkily.
3. Flagger flags the post as “inappropriate”.
4. Admin agrees and hides the post.
5. Troll ninja-edits the post within the grace period, but still snarky.
6. Flagger flags the post as inappropriate again.
The current behaviour is that the flagger is met with an error saying the post has been reviewed and can't be flagged again for the same reason.
The desired behaviour is after someone has edited a post, it should be flaggable again.
Why is this happening?
This is related to the ninja-edit feature, where within a set grace period no new revision is created, but a new revision is required to flag the same post for the same reason.
So essentially there is a window between the naughty corner cooldown where a flagged post can't be edited, and the ninja-edit grace period, where an edit can be made without a new revision. Posts that are edited within this window can't be re-flagged by the same user.
|-----------------|-------------------------------|
^ Flag accepted | ~~~~~~~~~~~~~ 🥷🏻 ~~~~~~~~~~~~ |
| ^ Editing grace period over
^ Naughty corner cooldown over
How does this fix it?
We already create a new revision when ninja-editing a post with a pending flag. The issue above happens only in the case where the flag is already accepted.
This change extends the existing behaviour so that a new revision is created when ninja-editing any flagged post, regardless of the status of the flag. (Deleted flags excluded.)
This should also help with posterity, avoiding situations where a successfully flagged post looks innocuous in the history because it was ninja-edited, and vice versa.
* DEV: move sidebar community section to database
Before, community section was hard-coded. In the future, we are planning to allow admins to edit it. Therefore, it has to be moved to database to `custom_sections` table.
Few steps and simplifications has to be made:
- custom section was hidden behind `enable_custom_sidebar_sections` feature flag. It has to be deleted so all forums, see community section;
- migration to add `section_type` column to sidebar section to show it is a special type;
- migration to add `segment` column to sidebar links to determine if link should be displayed in primary section or in more section;
- simplify more section to have one level only (secondary section links are merged);
- ensure that links like `everything` are correctly tracking state;
- make user an anonymous links position consistence. For example, from now on `faq` link for user and anonymous is visible in more tab;
- delete old community-section template.
SearchIndexer is only automatically disabled in `before_all` and `before` blocks which means at the start
of test runs. Enabling the SearchIndexer in one `fab!` block will affect
all other `fab!` blocks which is not ideal as we may be indexing stuff
for search when we don't need to.
What is the problem?
The system tests incorrectly assumes that the discobot user which is
seeded by a core plugin will always be present. This is not true as the
discobot user will only be seeded when the test databases are migrated
with plugins enabled. If we migrate test databases without plugins being
enabled, the core system tests should still pass.
This header is used by Microsoft Exchange to indicate when certain types of
autoresponses should not be generated for an email.
It triggers our "is this mail autogenerated?" detection, but should not be used
for this purpose.
`TopicQuery#latest_results` which was being used by
`TopicQuery#list_filter` defaults to ordering by `Topic#bumped_at` in
descending order and that was taking precedent over the order scopes
being applied by `TopicsFilter`.
This allows multiple ordering to be specified by using a comma seperated string.
For example, `order:created,views` would order the topics by
`Topic#created_at` and then `Topic#views.
An older change about optimising images caused the selector that adds lightboxing not to apply on quoted images. This fixes that. The selector is now not applicable as optimisation occurs in a separate place.
This change allows quoted images to be opened in a lightbox.
This new modifier can be used by plugins to modify search ordering.
Specifically plugins such as discourse_solved can amend search ordering
so solved topics bump to the top.
Also correct edge case where low and high sort priority categories did not
order correctly when it came to closed/archived
Many blog posts use these to illustrate and images were previously omitted
Additionally strip superfluous HTML and BODY tags from embed HTML.
This was incorrectly returned from server.
This commit adds support for the following ordering filters:
1. `order:activity` which orders the topics by `Topic#bumped_at` in descending order
2. `order:activity-asc` which orders the topics by `Topic#bumped_at` in ascending order
3. `order:latest-post` which orders the topics by `Topic#last_posted_at` in descending order
4. `order:latest-post-asc` which orders the topics by `Topic#last_posted_at` in ascending order
5. `order:created` which orders the topics by `Topic#created_at` in descending order
6. `order:created-asc` which orders the topics by `Topic#created_at` in ascending order
7. `order:views` which orders the topics by `Topic#views` in descending order
8. `order:views-asc` which orders the topics by `Topic#views` in ascending order
9. `order:likes` which orders the topics by `Topic#likes` in descending order
10. `order:likes-asc` which orders the topics by `Topic#likes` in ascending order
11. `order:likes-op` which orders the topics by `Post#like_count` of the first post in the topic in descending order
12. `order:likes-op-asc` which orders the topics by `Post#like_count` of the first post in the topic in ascending order
13. `order:posters` which orders the topics by `Topic#participant_count` in descending order
14. `order:posters-asc` which orders the topics by `Topic#participant_count` in ascending order
15. `order:category` which orders the topics by `Category#name` of the topic's category in descending order
16. `order:category-asc` which orders the topics by `Category#name` of the topic's category in ascending order
Multiple order filters can be composed together and the order of ordering is applied based on the position of the filter
in the query string. For example, `order:views order:created` will order the topics by `Topic#views` in descending order
and then order the topics by `Topics#created_at` in descending order.
This commit adds support for the following date filters:
1. `activity-before:<YYYY-MM-DD>` which filters for topics that have been bumped at or before given date
2. `activity-after:<YYYY-MM-DD>` which filters for topics that have been bumped at or after given date
3. `created-before:<YYYY-MM-DD>` which filters for topics that have been created at or before given date
4. `created-after:<YYYY-MM-DD>` which filters for topics that have been created at or after given date
5. `latest-post-before:<YYYY-MM-DD>` which filters for topics with the
latest post posted at or before given date
6. `latest-post-after:<YYYY-MM-DD>` which filters for topics with the
latest post posted at or after given date
If the filter has an invalid value, i.e string that cannot be converted
into a proper date in the `YYYY-MM-DD` format, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurrence of each filter will be taken into consideration.
Followup to c03f83bbea.
The `flair_group_id` parameter is now required to show the flair, and this serializer was missing that detail.
This also fixes a typo in the `include_flair_group_name?` method.
Group user event webhooks filtered by group fail silently
because the `group_ids` job arg wasn't being passed into the job.
This change add's `group_ids` to the `EmitWebHookEvent` jobs queued for
`user_added_to_group` and `user_removed_from_group` events.
Large or broken images are removed from oneboxes, but sometimes images
were removed when they were oneboxed too. The reason is that images can
be oneboxed by the AllowlistedGenericOnebox or ImageOnebox and only
AllowlistedGenericOnebox was handled correctly.
We call the `/u/search/users` URL when autocompleting users. It returns
user's name, username and avatar template, but not user ID.
We need it to return user IDs in order to display user status in certain situations.
I could add ID to FoundUserWithStatusSerializer, so it will be added only if
user status is enabled in site settings. But I feel that it's good to always return it,
it's not a lot of data comparing to what we already return, and it should be useful
in other scenarios.
This pull request is a full overhaul of the chat-composer and contains various improvements to the thread panel. They have been grouped in the same PR as lots of improvements/fixes to the thread panel needed an improved composer. This is meant as a first step.
### New features included in this PR
- A resizable side panel
- A clear dropzone area for uploads
- A simplified design for image uploads, this is only a first step towards more redesign of this area in the future
### Notable fixes in this PR
- Correct placeholder in thread panel
- Allows to edit the last message of a thread with arrow up
- Correctly focus composer when replying to a message
- The reply indicator is added instantly in the channel when starting a thread
- Prevents a large variety of bug where the composer could bug and prevent sending message or would clear your input while it has content
### Technical notes
To achieve this PR, three important changes have been made:
- `<ChatComposer>` has been fully rewritten and is now a glimmer component
- The chat composer now takes a `ChatMessage` as input which can directly be used in other operations, it simplifies a lot of logic as we are always working a with a `ChatMessage`
- `TextareaInteractor` has been created to wrap the existing `TextareaTextManipulation` mixin, it will make future migrations easier and allow us to have a less polluted `<ChatComposer>`
Note ".chat-live-pane" has been renamed ".chat-channel"
Design for upload dropzone is from @chapoi
Currently, only user badge grants emit webhook events. This change
extends the `user_badge` webhook to emit user badge revocation events.
A new `user_badge_revoked` event has been introduced instead of relying
on the existing `user_badge_removed` event. `user_badge_removed` emitted
just the `badge_id` and `user_id` which aren't helpful for generating a
meaningful webhook payload for revoked(deleted) user badges.
The new event emits the user badge object.
On the client-side, message-bus subscriptions and reviewable count UI is based on the 'redesigned_user_menu_enabled' boolean. We need to use the same logic on the server-side to ensure things work correctly when legacy navigation is used alongside the new user menu.
The value field of ThemeField is only used when viewing a diff in the staff action logs and local theme editing. value is being serialized into the theme index as well, which is not used. It's a huge amount of JSON that we can cut by removing it.
This also breaks up the various theme serializers into separate classes so they autoload properly (or at least restart the server on edit)
When revising a post, if the topic that post belonged to did not have a category attached it would error with
> NoMethodError (undefined method `read_restricted' for nil:NilClass)
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
Update chat and poll plugins to new pattern
* FIX: Do not overwrite existing thumbnails
When auto generating video thumbnails they should not overwrite any
existing topic thumbnails.
This also addresses an issue with capitalized file extensions like .MOV
that were being excluded.
* Update app/models/post.rb
Remove comment
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
This was failing quite often with the following error:
```
1) Emoji deny list when using composer should remove denied emojis from emoji picker
Failure/Error: find("#{COMPOSER_ID} .emoji-picker")
Capybara::ElementNotFound:
Unable to find css "#reply-control .emoji-picker"
```
This was because our `click_toolbar_button` call on the Composer
page object used a number for the position of the toolbar button,
which can be flaky since there are things that hide/show toolbar
buttons or change their position.
Each toolbar button in the composer has a CSS class, so it is
more reliable to use that instead. Also fixed an instance of
calling `has_X?` method directly instead of using the
`have_x` rspec matcher.
We are seeing issues with the composer not being able to close due to the addition of a error message when rescuing from `Draft::OutOfSequence`. This PR will revert to the original solution implemented prior to https://github.com/discourse/discourse/pull/21148 that just silently rescues from `Draft::OutOfSequence`
This PR adds the ability to destroy reviewables for a passed user via the API. This was not possible before as this action was reserved for reviewables for you created only.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a reviewable for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal reviewable and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the reviewable.
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
This commit fixes the following scenario:
1. The user is searching for hashtags in chat, where the subcategory
type is not highest-ranked in priority order.
2. There can, but doesn't have to be, a higher-ranked matching chat
channel that has the same slug as the subcategory.
3. Since it is not the highest-ranked type, the subcategory, which
normally has a ref of parent:child, has its ref changed to
child::category, which does not work
This was happening because whenever a hashtag type was not highest
ranked, if _any_ other hashtag results conflicted slugs, we would
append the ::type suffix. Now, we only append this suffix if a
higher-ranked type conflicts with the hashtag, and we use the current ref
to build the new typed ref to preserve this parent:child format as well,
it's more accurate.
This PR adds the ability to destroy drafts for a passed user via the API. This was not possible before as this action was reserved for only your personal drafts.
If a user is an admin and calls the `#destroy` action from the API they are able to destroy a draft for a passed user. A user can be targeted by passed either their:
- username
- external_id (for SSO)
to the request.
In the case you attempt to destroy a non-personal draft and
- You are not an admin
- You do not access the `#destroy` action via the API
you will raise a `Discourse::InvalidAccess` (403) and will not succeed in destroying the draft.
This fixes a 500 error that occurs when adding a tag to a category's
restricted tag list if the category's restricted tags already included a
synonym tag.
* FEATURE: add a setting to allowlist DiscourseConnect return path domains
This commit adds a site setting to allowlist DiscourseConnect return
path domains. The setting needs supports exact domain or wildcard
character (*) to allow for any domain as return path.
* Add more specs to clarify what is allowed in site setting
* Update setting description to explain what is allowed
Currently, some links aren’t properly built in Discobot when Discourse
is hosted in a subfolder. This is because we’re providing
`Discourse.base_url` to the Rails helpers which contains the base URL
*with* the prefix. But Rails helpers already handle this prefix so the
resulting link gets the prefix twice.
The fix is quite simple: use `Discourse.base_url_no_prefix` instead of
`Discourse.base_url`.
Following a change in e9f7262813 which prevents the notification level to be returned from the update endpoint, the model couldn't update itself. This commit makes the update manually and adds a test to prevent future regressions.
Note we could also change the backend endpoint, but this should work correctly with minimum risk.
* DEV: Support `likes-(min:max):<count>` on `/filter` route
This commit adds support for the following filters:
1. `likes-min`
2. `likes-max`
3. `views-min`
4. `views-max`
5. `likes-op-min`
6. `likes-op-max`
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurrence of each filter will be taken into consideration.
This commit adds support for the `posters-min:<count>` and
`posters-max:<count>` filters for the topics filtering query language.
`posters-min:1` will filter for topics with at least a one poster while
`posters-max:3` will filter for topics with a maximum of 3 posters.
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurence of each filter will be taken into consideration.
This commit adds support for the `posts-min:<count>` and
`posts-max:<count>` filters for the topics filtering query language.
`posts-min:1` will filter for topics with at least a one post while
`posts-max:3` will filter foor topics with a maximum of 3 posts.
If the filter has an invalid value, i.e string that cannot be converted
into an integer, the filter will be ignored.
If either of each filter is specify multiple times, only the last
occurence of each filter will be taken into consideration.
This commit introduces a ChatChannelPaneSubscriptionsManager
and a ChatChannelThreadPaneSubscriptionsManager that inherits
from the first service that handle MessageBus subscriptions
for the main channel and the thread panel respectively.
This necessitated a change to Chat::Publisher to be able to
send MessageBus messages to multiple channels based on whether
a message was an OM for a thread, a thread reply, or a regular
channel message.
An initial change to update the thread indicator with new replies
has been done too, but that will be improved in future as we have
more data to update on the indicators.
Still remaining is to fully move over the handleSentMessage
functionality which includes scrolling and new message indicator
things.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
When we "pull hotlinked images" on onebox images, they are added to the uploads table and their dominant color is calculated. This commit adds the data to the HTML so that it can be used by the client in the same way as non-onebox images. It also adds specific handling to the new `discourse-lazy-videos` plugin.
This feature will allow sites to define which emoji are not allowed. Emoji in this list should be excluded from the set we show in the core emoji picker used in the composer for posts when emoji are enabled. And they should not be allowed to be chosen to be added to messages or as reactions in chat.
This feature prevents denied emoji from appearing in the following scenarios:
- topic title and page title
- private messages (topic title and body)
- inserting emojis into a chat
- reacting to chat messages
- using the emoji picker (composer, user status etc)
- using search within emoji picker
It also takes into account the various ways that emojis can be accessed, such as:
- emoji autocomplete suggestions
- emoji favourites (auto populates when adding to emoji deny list for example)
- emoji inline translations
- emoji skintones (ie. for certain hand gestures)
Currently, we’re performing a check when a user is suspended in the
`UserEmail` job and we’re assuming a `post` is always available, which
is not the case. The code indeed breaks when the job is called with the
`account_suspended` type option.
This patch fixes this issue by making the check use the safe navigation
operator, thus making it working when `post` is not provided.
This commit adds support for the `created-by:<username>` query filter
which will return topics created by the specified user. Multiple
usernames can be specified by comma seperating the usernames like so:
`created-by:username1,username2`. This will filter for topics created by
either of the specified users. Multiple `created-by:<username>` can also
be composed together. `created-by:username1 created-by:username2` is
equivalent to `created-by:username1,username2`.
This was inadvertently removed in 4c46c7e. In very specific scenarios,
this could be used execute arbitrary JavaScript.
Only affects instances where SVGs are allowed as uploads and CDN is not
configured.
Previously, Discourse's password hashing was hard-coded to a specific algorithm and parameters. Any changes to the algorithm or parameters would essentially invalidate all existing user passwords.
This commit introduces a new `password_algorithm` column on the `users` table. This persists the algorithm/parameters which were use to generate the hash for a given user. All existing rows in the users table are assumed to be using Discourse's current algorithm/parameters. With this data stored per-user in the database, we'll be able to keep existing passwords working while adjusting the algorithm/parameters for newly hashed passwords.
Passwords which were hashed with an old algorithm will be automatically re-hashed with the new algorithm when the user next logs in.
Values in the `password_algorithm` column are based on the PHC string format (https://github.com/P-H-C/phc-string-format/blob/master/phc-sf-spec.md). Discourse's existing algorithm is described by the string `$pbkdf2-sha256$i=64000,l=32$`
To introduce a new algorithm and start using it, make sure it's implemented in the `PasswordHasher` library, then update `User::TARGET_PASSWORD_ALGORITHM`.
This commit adds support for the `in:<topic notification level>` query
filter. As an example, `in:tracking` will filter for topics that the
user is watching. Filtering for multiple topic notification levels can
be done by comma separating the topic notification level keys. For
example, `in:muted,tracking` or `in:muted,tracking,watching`.
Alternatively, the user can also compose multiple filters with `in:muted
in:tracking` which translates to the same behaviour as
`in:muted,tracking`.
This commit adds some more detailed information about how to actually
get the number of likes for a post.
Also refactors some requests and responses into json schema files to
clean up the specs a bit.
See https://meta.discourse.org/t/69017/4?u=blake
This commit adds support for the `in:pinned` filter to the topics filtering
query language. When the filter is present, it will filter for topics
where `Topic#pinned_until` is greater than `Topic#pinned_at`.
Previously, public custom sections were only visible to logged-in users. In this PR, we are making them visible to anonymous as well.
The reason is that Community Section will be moved into custom section model to be easily editable by admins.
This adds a SiteSetting, which when enabled, creates a small_action post for tag/category changes to the topic. It uses `topic.add_moderator_post, and passes raw text in, to describe the change.
Before this commit, composing multiple category filters with a query such as category:category1 and category:category2 would not return any results. This is because we were filtering for topics that belonged to both category1 and category2, which is impossible since a topic can only belong to a single category.
With this commit, specifying a query like category:category1 category:category2 will now translate to filtering for topics that belong to either the category1 or category2 category.
Invite only and Discourse connect could not be enabled at the same time
because of some legacy reason. This is a follow up commit to ce04db8,
355d51a and 40f6ceb.
This commit adds support for filtering for topics in specific
subcategories via the categories filter query language.
For example: `category:documentation:admins` will filter for topics and
subcategory topics in
the category with slug "admins" whose parent category has the slug
"documentation".
The `=` prefix can also be used such that
`=category:documentation:admins` will exclude subcategory topics of the
category with slug "admins" whose parent category has the slug
"documentation".
Previously, we used the schema type "DiscussionForumPosting" for all the posts including replies. This is not recommended as per Google search experts. This commit changes the schema type to "Comment" for replies.
On the `/filter` route, the categories filtering query language is now
supported in the input per the example provided below:
```
category:bug => topics in the bug category AND all subcategories
=category:bug => topics in the bug category excluding subcategories
category:bug,feature => allow for categories either in bug or feature
=category:bug,feature => allow for exact categories match excluding sub cats
categories: => alias for category
```
Currently composing multiple category filters is not supported as we
have yet to determine what behaviour it should result in. For example,
`category:bug category:feature` would now return topics that are in both
the `bug` and `feature` category but it is not possible for a topic to
belong to two categories.
`Rails.application.routes.recognize_path(value)` was not working for /admin paths because StaffConstraint.new requires user to check permission.
This validation is not bringing much value, and the easiest way is to drop it. In the worse case scenario, a user will have an incorrect link in their sidebar.
Bug reported: https://meta.discourse.org/t/custom-sidebar-sections-being-tested-on-meta/255303/66
Add a modifier that will allow us to tune the results returned by suggested.
At the moment the modifier allows us to toggle including random results.
This was created for the discourse-ai module. It needs to switch off random
results when it returns related topics.
Longer term we can use it to toggle unread/new and other aspects.
This also demonstrates how to test the contract when adding modifiers.
topic.url is a dangerous method to use, it is incompatible with our `sign_in`
helper.
This removes a bunch of places this was erroneously used and helps to avoid
future cargo culting.
Similar to the _map added for group_list SiteSettings in
e62e93f83a, this commit adds
the same extension for simple and compact `list` type SiteSettings,
so developers do not have to do the `.to_s.split("|")` dance
themselves all the time.
For example:
```
SiteSetting.markdown_linkify_tlds
=> "com|net|org|io|onion|co|tv|ru|cn|us|uk|me|de|fr|fi|gov|ddd"
SiteSetting.markdown_linkify_tlds_map
=> ["com", "net", "org", "io", "onion", "co", "tv", "ru", "cn", "us", "uk", "me", "de", "fr", "fi", "gov"]
```
There is no need to validate the user's emails when
promoting/demoting their trust level, this can cause
issues in things like Jobs::Tl3Promotions, we don't
need to fail in that case when all we are doing is changing
trust level.
Introduces a new API for plugin data modification without class-based extension overhead.
This commit introduces a new API that allows plugins to modify data in cases where they return different data rather than additional data, as is common with filtered_registers in DiscoursePluginRegistry. This API removes the need for defining class-based extension points.
When a plugin registers a modifier, it will automatically be called if the plugin is enabled. The core will then modify the parameter sent to it using the block registered by the plugin:
```ruby
DiscoursePluginRegistry.register_modifier(plugin_instance, :magic_sum_modifier) { |a, b| a + b }
sum = DiscoursePluginRegistry.apply_modifier(:magic_sum_filter, 1, 2)
expect(sum).to eq(3)
```
Key features of these modifiers:
- Operate in a stack (first registered, first called)
- Automatically disabled when the plugin is disabled
- Pass the cumulative result of all block invocations to the caller
The following are the changes being introduced in this commit:
1. Instead of mapping the query language to various query params on the
client side, we've decided that the benefits of having a more robust
query language far outweighs the benefits of having a more human readable query params in the URL.
As such, the `/filter` route will just accept a single `q` query param
and the query string will be parsed on the server side.
1. On the `/filter` route, the tags filtering query language is now
supported in the input per the example provided below:
```
tags:bug+feature tagged both bug and feature
tags:bug,feature tagged either bug or feature
-tags:bug+feature excluding topics tagged bug and feature
-tags:bug,feature excluding topics tagged bug or feature
```
The `tags` filter can also be specified multiple
times in the query string like so `tags:bug tags:feature` which will
filter topics that contain both the `bug` tag and `feature` tag. More
complex query like `tags:bug+feature -tags:experimental` will also work.
When user.last_seen was less than push_notification_time_window_mins we
where delaying the notification for the whole
push_notification_time_window_mins PLUS the time the user was away from.
Originally reported in https://meta.discourse.org/t/-/259688
`default_categories_*` site settings will update the category preferences on user creation. But it shouldn't update the user's category preference if a group's setting already updated it for that user.
This change sets the ground work for allowing us to filter topics list
by tags in the following ways:
1. Filter for topics that matches all tags in a given set of tags
2. Filter for topics that matches any tags in a given set of tags
3. Exclude topics that matches all tags in a given set of tags
4. Exclude topics that matches any tags in a given set of tags
Before, incorrectly filled fields were marked with red border. Now, additional information under the field is displayed to notify the user what is incorrect.
/t/93696
When we renamed the `default_categories_regular` to `default_categories_normal` we missed a site setting validation method. It allowed the duplicate category ids in `default_categories_normal` site setting and caused the problem in user registration process.
5176c689e9
When setting the ACL for optimized images after setting the
ACL for the linked upload (e.g. via the SyncACLForUploads job),
we were using the optimized image path as the S3 key. This worked
for single sites, however it would fail silently for multisite
sites since the path would be incorrect, because the Discourse.store.upload_path
was not included.
For example, something like this:
somecluster1/optimized/2X/1/3478534853498753984_2_1380x300.png
Instead of:
somecluster1/uploads/somesite1/2X/1/3478534853498753984_2_1380x300.png
The silent failure is still intentional, since we don't want to
break other things because of ACL updates, but now we will update
the ACL correctly for optimized images on multisite sites.
Change styling of filter input & remove button.
This follows the same pattern of design we use for search. In the search dropdown we do not have a button to search. We rely on pressing enter. I've also provided an example of Github's PR filter UI at the bottom of this comment.
We also do not have buttons like this on any other topic-list header. On tag and category dropdowns, we also rely on pressing enter to filter the topic list by chosen categories & tags.
Co-authored-by: Jordan Vidrine <jordan@jordanvidrine.com>
Our SafeMigrate system is designed to prevent tables/columns being dropped in pre-deploy migrations. Its regex-based detection was triggering incorrectly on `ALTER COLUMN DROP NOT NULL`.