In [57592], some `update_option()` calls were removed from bootstrapping. However, this also removed a check to ensure an array key existed, and populated it if not.
Scaffolding tests by WP-CLI revealed that a plugin in the `active_plugins` option may not have data already stored within the `plugin_data` option, causing a PHP warning for an undefined array key. This data will be added the next time `get_plugins()` is called.
This adds a condition to ensure the requirements checks are only performed on plugins whose data is already stored in the `plugin_data` option.
Follow-up to [57592].
Props swissspidy, hellofromTonya, costdev.
Fixes#60461.
Built from https://develop.svn.wordpress.org/trunk@57622
git-svn-id: http://core.svn.wordpress.org/trunk@57123 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The intended behaviour of Plugin Dependencies is that dependencies cannot be deleted until their dependents are deleted.
While the 'Delete' link was removed from the plugin row, the bulk actions checkbox remained enabled, allowing for deletion of dependencies through bulk actions.
This was unintended behaviour and the bulk actions checkbox is now disabled as intended.
Follow-up to [57545].
Props johnbillion, afragen, knutsp, huzaifaalmesbah, mukesh27, costdev.
Fixes#60471.
Built from https://develop.svn.wordpress.org/trunk@57620
git-svn-id: http://core.svn.wordpress.org/trunk@57121 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Improve buttons flow on small viewports, taking longer translations into account.
* Make `alt` attributes translatable.
* Remove unused `id` attributes.
Follow-up to [57602].
Props kebbet, afercia, mukesh27.
See #54370.
Built from https://develop.svn.wordpress.org/trunk@57618
git-svn-id: http://core.svn.wordpress.org/trunk@57119 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The Plugin Dependencies feature saves a list of any plugins that have been disabled due to unmet dependencies to a transient in order to give user feedback in the admin about what has taken place. This ensures that the DB operations to write this transient is skipped if there are no dependent plugins to deactivate.
Props joemcgill, costdev, afragen.
Fixes#60518.
Built from https://develop.svn.wordpress.org/trunk@57617
git-svn-id: http://core.svn.wordpress.org/trunk@57118 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, the `setCardButtonStatus()` JS function was called when a card had the ID 'plugin-information-footer'. However, the card will only exist on plugin install pages. This caused a failure when updating plugins from the plugin row on `plugins.php` due to an undefined `$card` variable.
This adds a guard to ensure that the current page is one of the plugin install pages, preventing the error and allowing plugin updates from the `plugins.php` rows to work as expected.
Follow-up to [57545].
Props Presskopp, huzaifaalmesbah, krupajnanda, hellofromTonya, krupalpanchal, costdev.
Fixes#60521.
Built from https://develop.svn.wordpress.org/trunk@57615
git-svn-id: http://core.svn.wordpress.org/trunk@57116 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This aims to bring consistency with the `image_make_intermediate_size` filter, which has the main DocBlock in `WP_Image_Editor_GD::_save()` and a duplicate hook reference in `WP_Image_Editor_Imagick::_save()`.
Follow-up to [57607].
See #21668.
Built from https://develop.svn.wordpress.org/trunk@57614
git-svn-id: http://core.svn.wordpress.org/trunk@57115 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This update modifies the error handling mechanism in the REST API meta fields functionality. Instead of halting execution and returning on the first encountered error, it now collects all errors in a WP_Error object and continues execution. Thus, this enhancement enables handling and displaying of multiple errors in a single response, improving the debugging process.
Props TimothyBlynJacobs, spacedmonkey, hellofromTonya, oglekler.
Fixes#48823.
Built from https://develop.svn.wordpress.org/trunk@57611
git-svn-id: http://core.svn.wordpress.org/trunk@57112 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When the fatal error handler is triggered within a REST API request, it currently utilizes wp_die to display a specially formatted error response. However, crucial information captured by the fatal error handler, such as the exact line where the error occurred, is not included in the response due to potential security concerns, such as leaking file paths.
To address this limitation and aid developers in debugging, this enhancement introduces the inclusion of error data in the response when the `WP_DEBUG_DISPLAY` constant is set to true. This additional data, appended under the new key error_data, will facilitate more thorough debugging for REST API errors.
Props ecc, spacedmonkey, TimothyBlynJacobs, rcorrales.
Fixes#60014.
Built from https://develop.svn.wordpress.org/trunk@57610
git-svn-id: http://core.svn.wordpress.org/trunk@57111 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Use 'theme_files' cache group for block pattern caches. Previously, block pattern cache data was not stored in a cache group and used the default group. This new cache group, is setup as a global cache group, meaning that sites using multisite, will have a single cache for block pattern data per theme. This change also no longer invalidate block pattern caches in multisite instances, meaning block pattern caches can be shared between sites on a network, meaning less repeated data in the object cache.
Props spacedmonkey, flixos90, joemcgill.
Fixes#60120.
Built from https://develop.svn.wordpress.org/trunk@57608
git-svn-id: http://core.svn.wordpress.org/trunk@57109 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add a new `image_save_progressive` filter which developers can use to control whether intermediate image sizes are saved in a progressive format (when available). By default, progressive image output is not used, matching the previous behavior.
Props: adamsilverstein, _ck_, markoheijnen, SergeyBiryukov, Japh, pmeenan, mikeschroder, derekspringer, buley, ericlewis, bahia0019, born2webdesign.
Fixes#21668.
Built from https://develop.svn.wordpress.org/trunk@57607
git-svn-id: http://core.svn.wordpress.org/trunk@57108 1a063a9b-81f0-0310-95a4-ce76da25c4cd
RE: Plugins Dependencies.
The following micro-optimization improvements are included for finding each plugin's file relative to the plugins' directory within `wp-settings.php`:
* Move `trailingslashit()` before `foreach()`.
The path to the plugin directory is a constant. Invoking the `trailingslashit()` within the loop for each plugin is unnecessary and less performant.
This commit moves the plugin directory logic to before the loop. The result: the logic will now run 1x instead of Px where P represents the number of active and valid plugins to be loaded.
* Use `substr()` instead of `str_replace()` to extract the plugin's file relative to the plugins' directory.
`substr()` is more performant than `str_replace()`.
Why?
Per the PHP handbook:
>"This function returns a string or an array with all occurrences of search in subject replaced with the given replace value."
`str_replace()` searches the entire string to find and replace each substring occurrence.
whereas
>"Returns the portion of string specified by the offset and length parameters."
`substr()` starts at the given offset and stops at the given (or end of the) string length.
In other words, `substr()` iterates over less of and only a specific portion of the given input string, whereas `str_replace()` iterates through the entire string searching for matches (plural).
References:
* `str_replace()` https://www.php.net/manual/en/function.str-replace.php
* `substr()` https://www.php.net/manual/en/function.substr.php
* `strlen()` https://www.php.net/manual/en/function.strlen.php
* Show the comparison in action https://3v4l.org/TbQ9U.
Follow-up to [57545], [57592].
Props hellofromTonya, costdev.
Fixes#60510.
Built from https://develop.svn.wordpress.org/trunk@57606
git-svn-id: http://core.svn.wordpress.org/trunk@57107 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Audio and video attachments can have a featured image, also known as a poster image. This functionality is now properly exposed by the `wp/v2/media` endpoint.
Props swissspidy, timothyblynjacobs, wonderboymusic, dlh, spacedmonkey.
Fixes#41692.
Built from https://develop.svn.wordpress.org/trunk@57603
git-svn-id: http://core.svn.wordpress.org/trunk@57104 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This restores the site icon setting to its original home on the settings page where it lives with the title and tagline.
The base for this code was originally added in [32994] and then removed in [33329]. The majority of the modification to that version are to remove the no-js pieces and make the workflow completely inline rather than putting the cropping on a separate page.
Additionally, since image crops rely on the ability to upload an image, this setting is gated by the `upload_files` capability.
Follow-up to: [32994], [33329].
Props jorbin, audrasjb, mukesh27, joedolson, afercia, kebbet, swissspidy, obenland, jameskoster, kjellr, andraganescu, stacimc, mikeschroder, h71, krupajnanda, huzaifaalmesbah.
Fixes#54370.
See #16434.
Built from https://develop.svn.wordpress.org/trunk@57602
git-svn-id: http://core.svn.wordpress.org/trunk@57103 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset ensures the result of the font URL functions is a `string` before using it in `add_editor_style()`, to avoid PHP warnings on child themes. This similarily updates Twenty Thirteen, Twenty Fourteen, Twenty Fifteen, Twenty Sixteen, and Twenty Seventeen.
Props jordesign, SergeyBiryukov, sabernhardt, huzaifaalmesbah, shailu25.
Fixes#59704.
Built from https://develop.svn.wordpress.org/trunk@57601
git-svn-id: http://core.svn.wordpress.org/trunk@57102 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This commit moves `line-height` to the Buttons container and removes the duplicate `outline` property.
Props sabernhardt, nidhidhandhukiya, monzuralam, shailu25, hrrarya, karmatosed, harshgajipara, nicolefurlan, fnpen, oglekler, poena, huzaifaalmesbah, audrasjb.
Fixes#58443.
Built from https://develop.svn.wordpress.org/trunk@57599
git-svn-id: http://core.svn.wordpress.org/trunk@57100 1a063a9b-81f0-0310-95a4-ce76da25c4cd
On upgrade, the `$_old_files` array is used to cleanup any files that exist in a previous version of core but are no longer present in the current version. Sometimes, an entire directory should be removed. In the past, when a parent directory was included in the array, subfiles were also included for good measure.
However, the code that removes the old files uses `$wp_filesystem->delete()` with the `$recursive` parameter set to `true`. With this setup, individual subfiles are not required to be individually listed when their parent directory is already included in the `$_old_files` array.
This commit removes all individual subfiles from the `$_old_files` array when their parent directory is already included.
Props SergeyBiryukov, mhshohel, pbiron, oglekler.
Fixes#58995.
Built from https://develop.svn.wordpress.org/trunk@57598
git-svn-id: http://core.svn.wordpress.org/trunk@57099 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, `shortcode_parse_atts()` would return the input (an empty string) if a shortcode had no attributes, even though the documentation said otherwise.
Always returning an (empty) array reduces confusion and improves developer experience as the return value does not have to be manually checked in the shortcode itself.
Props: nicolefurlan, swissspidy, johnbillion, bedas.
Fixes#59249.
Built from https://develop.svn.wordpress.org/trunk@57597
git-svn-id: http://core.svn.wordpress.org/trunk@57098 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Using the new technique introduced in [57157] of using a `metadata.ignoredHookedBlocks` attribute in the anchor block to store information about whether or not a hooked block should be considered for injection, extend said injection to encompass ''modified'' templates and parts.
Fixes#59646.
Props gziolo, matveb.
Built from https://develop.svn.wordpress.org/trunk@57594
git-svn-id: http://core.svn.wordpress.org/trunk@57095 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[57545] introduced the Plugin Dependencies feature, which contains a new `plugin_data` option.
Previously, the `plugin_data` option was being updated during bootstrap and in `get_plugins()`, causing an error when using the install script as the options database table does not yet exist, and also risked an "out of sync" issue between the database and the cache on websites with heavy traffic.
This removes the calls to `update_option()` during Core's bootstrap, and guards the call in `get_plugins()` to ensure that it doesn't run when WordPress is installing.
Follow-up to [57545].
Props desrosj, swisspidy, huzaifaalmesbah, afragen, dd32, azaozz, costdev.
Fixes#60461. See #60457, #60491.
Built from https://develop.svn.wordpress.org/trunk@57592
git-svn-id: http://core.svn.wordpress.org/trunk@57093 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset fixes an issue where the `.privacy-policy` styles were applied to other locations than the footer only, like the `privacy-policy` page itself.
Props mnydigital, sabernhardt, huzaifaalmesbah, shailu25, poena.
Fixes#60469.
Built from https://develop.svn.wordpress.org/trunk@57589
git-svn-id: http://core.svn.wordpress.org/trunk@57090 1a063a9b-81f0-0310-95a4-ce76da25c4cd
On the front end, this changeset restores the theme's default border color when (and only when) the block's text color is the default.
In the editor, these styles repurpose the user-selected color for the border, to match the front.
Props nidhidhandhukiya, sabernhardt, pooja1210, pouicpouic, poena, shailu25, ugyensupport, wasiur195, rajinsharwar, wasiur195, jivygraphics, huzaifaalmesbah, harshgajipara, nicolefurlan, sumitbagthariya16.
Fixes#58022.
Built from https://develop.svn.wordpress.org/trunk@57587
git-svn-id: http://core.svn.wordpress.org/trunk@57088 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Occasionally, the tests verifying that old trashed posts or comments are not deleted if not old enough can take longer than expected, leading to false positives when comparing the timestamp in `wp_scheduled_delete()`, and resulting in subsequent test failures.
This commit aims to resolve the race condition.
Follow-up to [57224], [57237].
See #59938.
Built from https://develop.svn.wordpress.org/trunk@57583
git-svn-id: http://core.svn.wordpress.org/trunk@57084 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The WP_HTML_Processor::has_bookmark() method has not correctly reported bookmarks
which have been set, because it wraps the given bookmark names when setting them.
Additionally, WP_HTML_Processor::seek() does not seek to correct location if HTML
has been updated because it wasn't flushing enqueued updates to the document.
In this patch both problems are resolved and added tests guard these behaviors
against future regressions.
Developed in https://github.com/WordPress/wordpress-develop/pull/6039
Discussed in https://core.trac.wordpress.org/ticket/60474
Follow-up to [56274].
Props dmsnell, jonsurrell.
Fixes#60474.
Built from https://develop.svn.wordpress.org/trunk@57582
git-svn-id: http://core.svn.wordpress.org/trunk@57083 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that there is some spacing between the Cover and File blocks.
Props mukesh27, mayur8991, panchalhimani711, sabernhardt, itpathsolutions, thakordarshil, ankit-k-gupta, ugyensupport, pooja1210, shailu25, harshgajipara, darshitrajyaguru97, poena.
Fixes#58498.
Built from https://develop.svn.wordpress.org/trunk@57581
git-svn-id: http://core.svn.wordpress.org/trunk@57082 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Pre-fill category fields in the Quick/Bulk Edit form with their current status.
When bulk editing, if only some of the selected items are in a given category, the category's checkbox will display a line to indicate an indeterminate status.
Originally committed in [56172], but reverted due to a bug that removed all categories. Updated commit fixes the bug, adds unit tests, and improves the accessibility of the indeterminate state checkboxes.
Props pavelevap, scribu, chasedsiedu, helen, joshcanhelp, ubernaut, Cyberchicken, laumindproductscomau, SergeyBiryukov, Marcoevich, tomybyte, thinkluke, virtality-marketing-solutions, Michalooki, dmsnell, itecrs, pannelars, WHSajid, samba45, Mte90, johnbillion, tomluckies, soulseekah, francina, oglekler, ajmcfadyen, mukesh27, costdev, hellofromTonya, peterwilsoncc, joedolson, pbiron, oglekler, webcommsat, jorbin, ajmcfadyen, huzaifaalmesbah.
Fixes#11302.
Built from https://develop.svn.wordpress.org/trunk@57580
git-svn-id: http://core.svn.wordpress.org/trunk@57081 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that avatars design in the Post Author or Avatar blocks in the editor matches the front end.
Props pitamdey, shailu25, poena, sabernhardt, balub, sarath.ar, nicolefurlan, harshgajipara, pooja1210.
Fixes#59285.
Built from https://develop.svn.wordpress.org/trunk@57579
git-svn-id: http://core.svn.wordpress.org/trunk@57080 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Refactors the processing of block bindings into steps:
- Gets the value for each "bound" attribute from the respective source.
- Returns the computer attributes with values from the sources.
- The computed attributes get injected into block's content.
- The `render_callback` gets the updated list of attributes and processeded block content.
Fixes#60282.
Props czapla, gziolo, andraganescu, santosguillamot.
Built from https://develop.svn.wordpress.org/trunk@57574
git-svn-id: http://core.svn.wordpress.org/trunk@57075 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Replace the `table` element used to present color palette selection in the user profile screen with generic elements. The extra semantics of a table are at best unhelpful and have some potential to great extraneous verbosity for screen readers.
Props sabernhardt, desrosj.
Fixes#53157.
Built from https://develop.svn.wordpress.org/trunk@57572
git-svn-id: http://core.svn.wordpress.org/trunk@57073 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If a plugin also registers the category name `pages` in an `init` hook that runs after the theme's, it can override the label and description unintentionally.
With a prefix, extenders can still override it, but it would be intentional.
Props poena, swissspidy, shailu25.
Fixes#59839.
Built from https://develop.svn.wordpress.org/trunk@57569
git-svn-id: http://core.svn.wordpress.org/trunk@57070 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The MySQL Docker containers for versions 5.7 and below do not support recent Apple silicone chips. Previously this was fixed by including `amd64/` as a prefix to the image name in the `docker-compose.yml` file (see [54096]). However, this stopped working after recent updates to Docker Desktop.
This changeset removes the `amd64/` prefix for the image used as the database container and raises the default version of MySQL in the local development environment to the current LTS version (8.0). Because this version is still maintained, there are `arm64` containers available to use.
This also documents a new workaround for contributors looking to run the local Docker environment using MySQL 5.7 or earlier, which entails creating a small `docker-compose.override.yml`.
Props bernhard-reiter, johnbillion, afragen, huzaifaalmesbah.
Fixes#59930.
Built from https://develop.svn.wordpress.org/trunk@57568
git-svn-id: http://core.svn.wordpress.org/trunk@57069 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Replaces the alias `join()` with its canonical `implode()`.
Using the canonical function name for PHP functions is strongly recommended, as aliases may be deprecated or removed without (much) warning.
Follow-up to [57539], [49193].
Props davidbinda.
Fixes#60473.
Built from https://develop.svn.wordpress.org/trunk@57567
git-svn-id: http://core.svn.wordpress.org/trunk@57068 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since being introduced, the GitHub Actions workflow responsible for generating and submitting a test coverage report has used PHP 7.4. At the time, there were some issues with running the test suite on PHP 8.0+ which could have resulted in inaccurate reporting.
The test suite and WordPress in general are much more stable on 8.x now. The test coverage report should now be generated using the Docker container tagged `latest` (currently 8.2).
This will result in a very small decrease in the percentage of lines covered by test (-0.05%), but a slight increase in the percentage of functions and methods covered (+0.08%).
Props johnbillion.
See #59647.
Built from https://develop.svn.wordpress.org/trunk@57566
git-svn-id: http://core.svn.wordpress.org/trunk@57067 1a063a9b-81f0-0310-95a4-ce76da25c4cd
If a plugin also registers the category name `page` in an `init` hook that runs after the theme's, it can override the label and description unintentionally.
With a prefix, extenders can still override it, but it would be intentional.
Props shailu25, poena, acosmin, harshgajipara, swissspidy.
See #59839.
Built from https://develop.svn.wordpress.org/trunk@57555
git-svn-id: http://core.svn.wordpress.org/trunk@57056 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Set a global focus outline for block elements in Twenty Twenty-Four to enhance accessibility. Replace the 1px dotted outline previously assigned on the button block.
Props alh0319, poena, beafialho, shailu25.
Fixes#60334.
Built from https://develop.svn.wordpress.org/trunk@57554
git-svn-id: http://core.svn.wordpress.org/trunk@57055 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Apply new focus styles from WordPress 5.3 more broadly. An updated focus style for form inputs, buttons, and link styled as buttons was added in WordPress 5.3; this commit makes other focus styles consistent with those changes so they meet accessibility standards for color contrast.
Props johnbillion, kebbet, joedolson, afercia.
Fixes#51870.
Built from https://develop.svn.wordpress.org/trunk@57553
git-svn-id: http://core.svn.wordpress.org/trunk@57054 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This commits add three endpoints to retrieve and manipulate fonts in WordPress.
This commit also means that we now have a fully functional Font Library in the site editor.
Props get_dave, youknowriad, mmaattiiaass, grantmkin, swissspidy, mcsf, jorbin, ocean90.
See #59166.
Built from https://develop.svn.wordpress.org/trunk@57548
git-svn-id: http://core.svn.wordpress.org/trunk@57049 1a063a9b-81f0-0310-95a4-ce76da25c4cd
These changes fix the generation of selectors for block style variations. Previously, an incorrect CSS selector could be generated if the block's base selector used an element tag etc.
Props aaronrobertshaw, youknowriad, mukesh27.
Fixes#60453.
Built from https://develop.svn.wordpress.org/trunk@57547
git-svn-id: http://core.svn.wordpress.org/trunk@57048 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Changes the output of core block global styles when `should_load_separate_core_block_assets` is true so they are appended to base global styles instead of block-library styles.
Props isabel_brison, oandregal, azaozz, ajlende.
Fixes#60280.
Built from https://develop.svn.wordpress.org/trunk@57546
git-svn-id: http://core.svn.wordpress.org/trunk@57047 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces a new "Requires Plugins" plugin header so that plugin developers can list the slugs of the plugins theirs depends on.
This will inform users of the requirements, and provide links to the WordPress.org Plugins Repository that they can click to install and activate the dependencies first.
Plugins whose requirements are not met cannot be installed or activated, and they will be deactivated automatically if their requirements become unmet.
Plugins that others rely on cannot be deactivated or deleted until their dependent plugins are deactivated or deleted.
In memory of Alex Mills and Alex King.
WordPress Remembers.
Props ahoereth, afragen, alanfuller, alexkingorg, amykamala, anonymized_10690803, apeatling, ashfame, atimmer, audrasjb, aristath, azaozz, batmoo, beaulebens, blobaugh, bobbingwide, boonebgorges, brianhenryie, chanthaboune, chrisdavidmiles, coolmann, costdev, courane01, danielbachhuber, davidperez, dd32, Denis-de-Bernardy, dingo_d, DJPaul, dougal, DrewAPicture, ethitter, filosofo, georgestephanis, giuseppemazzapica-1, goldenapples, griffinjt, hellofromTonya, husobj, ideag, jarednova, jbobich, jbrinley, jltallon, joedolson, johnciacia, johnjamesjacoby, joppuyo, jsmoriss, karmatosed, kebbet, knutsp, kraftbj, kraftner, kurtpayne, lkraav, logikal16, luisherranz, man4toman, markjaquith, matt, mbijon, megphillips91, mikeschinkel, mordauk, morehawes, mrwweb, mte90, mukesh27, mzaweb, nacin, norcross, nvwd, nwjames, obliviousharmony, ocean90, oglekler, paaljoachim, pauldewouters, pbaylies, pbiron, peterwilsoncc, Philipp15b, poena, pogidude, retlehs, rmccue, ryan, sabreuse, sc0ttkclark, scribu, sereedmedia, SergeyBiryukov, ShaneF, shidouhikari, soean, spacedmonkey, stephenh1988, swissspidy, taylorde, tazotodua, threadi, TimothyBlynJacobs, TJNowell, tollmanz, toscho, tropicalista, Viper007Bond, westi, whiteshadow, williamsba1, wpsmith, ZaneMatthew.
Fixes#22316.
Built from https://develop.svn.wordpress.org/trunk@57545
git-svn-id: http://core.svn.wordpress.org/trunk@57046 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Block themes and classic themes with template parts support
can already access the patterns list within the site editor.
This adds a "Patterns" menu item under Appearance for classic themes
without template parts support.
Props wildworks, kevin940726, aaronrobertshaw, fabiankaegy, swissspidy, get_dave, kebbet.
Fixes#58827.
Built from https://develop.svn.wordpress.org/trunk@57543
git-svn-id: http://core.svn.wordpress.org/trunk@57044 1a063a9b-81f0-0310-95a4-ce76da25c4cd
A fix was introduced to the Tag Processor to ensure that contiguous text
in an HTML document emerges as a single text node spanning the full
sequence. Unfortunately, that patch was marginally over-zealous in
checking if a "<" started a syntax token or not. It used the following:
{{{
<?php
if ( 'A' <= $c && 'z' >= $c ) { ... }
}}}
This was based on the assumption that the A-Z and a-z letters are
contiguous in the ASCII range; they aren't, and there's a gap of
several characters in between. The result of this is that in some
cases the parser created a text boundary when it didn't need to.
Text boundaries can be surprising and can be created when reaching
invalid syntax, HTML comments, and more hidden elements, so
semantically this wasn't a major bug, but it was an aesthetic
challenge.
In this patch the check is properly compared for both upper- and
lower-case variants that could potentially form tag names.
{{{
<?php
if ( ( 'A' <= $c && 'Z' >= $c ) || ( 'a' <= $c && 'z' >= $c ) ) { ... }
}}}
This solves the problem and ensures that contiguous text appears
as a single text node when scanning tokens.
Developed in https://github.com/WordPress/wordpress-develop/pull/6041
Discussed in https://core.trac.wordpress.org/ticket/60385
Follow-up to [57489]
Props dmsnell, jonsurrell
Fixes#60385
Built from https://develop.svn.wordpress.org/trunk@57542
git-svn-id: http://core.svn.wordpress.org/trunk@57043 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is the first step towards adding the font library to WordPress.
This commit includes the font library and font face CPTs.
It also adds the necessary APIs and classes to register and manipulate font collections.
This PR backports the font library post types and low level APIs to Core. This is the first step to include the font library entirely into Core. Once this merged, we'll open a PR with the necessary REST API controllers.
Props youknowriad, get_dave, grantmkin, swissspidy, hellofromtonya, mukesh27, mcsf.
See #59166.
Built from https://develop.svn.wordpress.org/trunk@57539
git-svn-id: http://core.svn.wordpress.org/trunk@57040 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`ZipArchive` can fail to validate ZIP files correctly and report valid files as invalid. This introduces a fallback to `PclZip` to check validity of files if `ZipArchive` fails them.
This introduces the new function `wp_zip_file_is_valid()` to validate archives.
Follow up to [57388].
Props audunmb, azaozz, britner, cdevroe, colorful-tones, costdev, courane01, endymion00, feastdesignco, halounsbury, jeffpaul, johnbillion, jorbin, jsandtro, karinclimber, kevincoleman, koesper, maartenbelmans, mathewemoore, melcarthus, mujuonly, nerdpressteam, olegfuture, otto42, peterwilsoncc, room34, sayful, schutzsmith, stephencronin, svitlana41319, swissspidy, tnolte, tobiasbg, vikram6, welaunchio.
Fixes#60398.
Built from https://develop.svn.wordpress.org/trunk@57537
git-svn-id: http://core.svn.wordpress.org/trunk@57038 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the `codecov/codecov-action` from version `3.1.5` to `4.0.1`.
Version 4 switches to using the Codecov CLI to upload test report date, and changes the version of Node.js used for the action to 20.x. This fixes the notices currently shown for the test coverage workflow.
Props: mukesh27.
See #59658.
Built from https://develop.svn.wordpress.org/trunk@57534
git-svn-id: http://core.svn.wordpress.org/trunk@57035 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This private method was introduced in [56033] / #12009 but it's not actually used.
It was part of the inline script implementation which was later reverted before final merge.
The method can be safely removed because it’s private and cannot be used by extenders.
Props joemcgill.
Fixes#60438.
Built from https://develop.svn.wordpress.org/trunk@57533
git-svn-id: http://core.svn.wordpress.org/trunk@57034 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Avoid false test failures due to network conditions in the `WP_REST_Plugins_Controller_Test` class. This mocks HTTP responses from the plugin information endpoint for the link-manager plugin.
Props: peterwilsoncc, costdev.
See #59647.
Built from https://develop.svn.wordpress.org/trunk@57531
git-svn-id: http://core.svn.wordpress.org/trunk@57032 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The HTML Processor tracks whether a token was found with the self-closing flag.
Depending on the context, this flag may or may not indicate that the element is
self closing. Unfortunately it's been tracking the wrong flag: it's been tracking
the end-tag flag, which indicates that a token is an end tag.
In this patch the right flag is set in the HTML Processor. This hasn't been an
issue because the HTML Processor doesn't yet read that stored flag, but it's an
important fix to make before adding support for foreign content (SVG and MathML)
since that behavior depends on reading the correct flag.
Follow-up to [56274].
Props dmsnell.
Built from https://develop.svn.wordpress.org/trunk@57528
git-svn-id: http://core.svn.wordpress.org/trunk@57029 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It fixes the coding style issues reported. It goes further and improves the code quality it other places where the logic for block bindings was added.
Follow-up for [57514].
Props: gziolo, mukesh27, youknowriad, santosguillamot.
See #60282.
Built from https://develop.svn.wordpress.org/trunk@57526
git-svn-id: http://core.svn.wordpress.org/trunk@57027 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add support for uploading, editing and saving AVIF images when supported by the server.
Add 'image/avif' to supported mime types. Correctly identify AVIF images and sizes even when PHP doesn't support AVIF. Resize uploaded AVIF files (when supported) and use for front end markup.
Props adamsilverstein, lukefiretoss, ayeshrajans, navjotjsingh, Tyrannous, jb510, gregbenz, nickpagz, JavierCasares, mukesh27, yguyon, swissspidy.
Fixes#51228.
Built from https://develop.svn.wordpress.org/trunk@57524
git-svn-id: http://core.svn.wordpress.org/trunk@57025 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This makes a few improvements made to the Props Bot workflow:
- The bot will no longer run on draft PRs.
- The bot will no longer run on closed PRs.
- The bot will no longer run when a comment is deleted (this should almost never happen).
Props mamaduka, gziolo.
See #60417.
Built from https://develop.svn.wordpress.org/trunk@57523
git-svn-id: http://core.svn.wordpress.org/trunk@57024 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The native cursor style for labels and form controls is `default`, which is the platform-dependent default cursor. Typically an arrow. Historically, WordPress always used the `pointer` style for all form controls and labels. While this isn't standard, there is some value in using the `pointer` style for form controls. However, labels should use the default style especially when the associated controls are disabled.
Additionally, makes sure the disabled styling works for form controls with an `aria-disabled="true"` attribute.
Props joedolson, afercia.
Fixes#59733.
Built from https://develop.svn.wordpress.org/trunk@57520
git-svn-id: http://core.svn.wordpress.org/trunk@57021 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Props Bot is a new GitHub Action that will compile a list of contributors for a given pull request. The bot will leave a comment with a list of contributors formatted for use in both Trac SVN and GitHub.
Props dharm1025, desrosj, jorbin, jeffpaul, dd32, pento, gziolo, swissspidy, talldanwp, noisysocks, youknowriad, peterwilsoncc, joemcgill, chrisdavidmiles, wpscholar, annezazu, chanthaboune, desrosjbot.
See #60417.
Built from https://develop.svn.wordpress.org/trunk@57517
git-svn-id: http://core.svn.wordpress.org/trunk@57018 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adjusts the translation file lookup in `WP_Textdomain_Registry` so that just-in-time translation loading
works even if there is only a `.l10n.php` translation file without a corresponding `.mo` file.
While language packs continue to contain both file types, this makes it easier to use translations in a project
without having to deal with `.mo` or `.po` files.
Props Chrystl.
See #59656.
Built from https://develop.svn.wordpress.org/trunk@57516
git-svn-id: http://core.svn.wordpress.org/trunk@57017 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevent `options.allowLocalEdits` from toggling to true during the upload cycle. Otherwise, media meta fields can be edited, but the data will be lost as soon as the upload process is completed.
Props codepo8, oglekler, nicolefurlan, antpb, syamraj24, joedolson.
Fixes#58783, #23374.
Built from https://develop.svn.wordpress.org/trunk@57515
git-svn-id: http://core.svn.wordpress.org/trunk@57016 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This introduces the Block Bindings API for WordPress.
The API allows developers to connects block attributes to different sources. In this PR, two such sources are included: "post meta" and "pattern". Attributes connected to sources can have their HTML replaced by values coming from the source in a way defined by the binding.
Props czapla, lgladdy, gziolo, sc0ttkclark, swissspidy, artemiosans, kevin940726, fabiankaegy, santosguillamot, talldanwp, wildworks.
Fixes#60282.
Built from https://develop.svn.wordpress.org/trunk@57514
git-svn-id: http://core.svn.wordpress.org/trunk@57015 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensures that string lookup in MO files only uses the singular string.
This matches expected behavior with gettext files and improves compatibility for cases where for example both `__( 'Product' )` and `_n( 'Product', 'Products’, num )` are used in a project, where both will use the same translation for the singular version. Maintains backward compatibility and feature parity with the pomo library and the PHP translation file format.
Replaces [57386], which was reverted in [57505], with a more accurate and performant solution.
See #59656.
Built from https://develop.svn.wordpress.org/trunk@57513
git-svn-id: http://core.svn.wordpress.org/trunk@57014 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In 6.5 we are removing a couple of functions in Core blocks that were enqueuing the files needed to add that interactivity. Interactivity is handled with modules, so those functions are not needed anymore and are deprecated.
Props swissspidy, cbravobernal.
Fixes#60380.
Built from https://develop.svn.wordpress.org/trunk@57511
git-svn-id: http://core.svn.wordpress.org/trunk@57012 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Rename `$p` variable to `$processor` in tests for clarity.
Use static data providers. A mix of static and non-static data providers were
used in HTML API tests. Data providers are required to be static in the next
PHPUnit version and there's no harm in using them consistently now.
Follow-up to [57507]
Props jonsurrell
See #59647
Built from https://develop.svn.wordpress.org/trunk@57508
git-svn-id: http://core.svn.wordpress.org/trunk@57009 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When `next_token()` was introduced, it introduced a regression in the HTML
Processor whereby void tags remain on the stack of open elements when they
shouldn't. This led to invalid values returned from `get_breadcrumbs()`.
The reason was that calling `next_token()` works through a different code path
than the HTML Processor runs everything else. To solve this, its sub-classed
`next_token()` called `step( self::REPROCESS_CURRENT_TOKEN )` so that the proper
HTML accounting takes place.
Unfortunately that same reprocessing code path skipped the step whereby void
and self-closing elements are popped from the stack of open elements.
In this patch, that step is run with a third mode for `step()`, which is the
new `self::PROCESS_CURRENT_TOKEN`. This mode acts as if `self::PROCESS_NEXT_NODE`
were called, except it doesn't advance the parser.
Developed in https://github.com/WordPress/wordpress-develop/pull/5975
Discussed in https://core.trac.wordpress.org/ticket/60382
Follow-up to [57348]
Props dmsnell, jonsurrell
Fixes#60382
Built from https://develop.svn.wordpress.org/trunk@57507
git-svn-id: http://core.svn.wordpress.org/trunk@57008 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When `next_token()` was introduced to the HTML Tag Processor, it started
classifying comments that look like they were intended to be CDATA sections.
In one of the changes made during development, however, a typo slipped
through code review that treated comments as CDATA even if they only
ended in `]>` and not the required `]]>`.
The consequences of this defect were minor because in all cases these are
treated as HTML comments from invalid syntax, but this patch adds the
missing check to ensure the proper reporting of CDATA-lookalikes.
Follow-up to [57348]
Props jonsurrell
Fixes#60406
Built from https://develop.svn.wordpress.org/trunk@57506
git-svn-id: http://core.svn.wordpress.org/trunk@57007 1a063a9b-81f0-0310-95a4-ce76da25c4cd
WP_Theme_JSON sanitization is now able to sanitize data contained on indexed arrays.
So certain data from theme.json, for example, settings.typography.fontFamilies which is a JSON array will be sanitized.
Props mmaattiiaass, mukesh27.
Fixes#60360.
Built from https://develop.svn.wordpress.org/trunk@57496
git-svn-id: http://core.svn.wordpress.org/trunk@56997 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When `next_token()` was introduced, it brought a subtle bug. When encountering a `<` in the HTML stream which did not lead to a tag or comment or other token, it was treating the full text span to that point as one text node, and the following span another text node.
The entire span should be one text node.
In this patch the Tag Processor properly detects this scenario and combines the spans into one text node.
Follow-up to [57348]
Props jonsurrell
Fixes#60385
Built from https://develop.svn.wordpress.org/trunk@57489
git-svn-id: http://core.svn.wordpress.org/trunk@56990 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensures that looking up a singular that is also used as a pluralized string works as expected.
This improves compatibility for cases where for example both `__( 'Product' )` and `_n( 'Product', 'Products’, num )` are used in a project, where both will use the same translation for the singular version.
Although such usage is not really recommended nor documented, it must continue to work in the new i18n library in order to maintain backward compatibility and maintain expected behavior.
See #59656.
Built from https://develop.svn.wordpress.org/trunk@57386
git-svn-id: http://core.svn.wordpress.org/trunk@56892 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previous Gutenberg versions are not compatible with recent trunk because of the
WP_Navigation_Block_Renderer classname. It's present in both.
Gutenberg has been updated to avoid the use of this class but we need to auto-disable
old plugins to avoid fatals.
Props hellofromtonya.
See #60315.
Built from https://develop.svn.wordpress.org/trunk@57384
git-svn-id: http://core.svn.wordpress.org/trunk@56890 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This patch, somewhat small brings a lot to WordPress.
This includes features like:
- DataViews.
- Customization tools like box shadow, background size and repeat.
- UI improvements in the site editor.
- Preferences sharing between the post and site editors.
- Unified panels and editors between post and site editors.
- Improved template mode in the post editor.
- Iterations to multiple interactive blocks.
- Preparing the blocks and UI for pattern overrides.
- and a lot more.
Props luisherranz, gziolo, isabel_brison, costdev, jonsurrell, peterwilsoncc, get_dave, antonvlasenko, desrosj.
See #60315.
Built from https://develop.svn.wordpress.org/trunk@57377
git-svn-id: http://core.svn.wordpress.org/trunk@56883 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It is part of the sync from the Gutenberg plugin that introduces the registry for block binding sources required for the new Block Bindings API: WordPress/gutenberg#54536.
See #60282.
Follow-up [57373].
Props czapla, artemiosans, santosguillamot, sc0ttkclark, lgladdy, talldanwp, swissspidy, youknowriad, fabiankaegy, mukesh27.
Built from https://develop.svn.wordpress.org/trunk@57375
git-svn-id: http://core.svn.wordpress.org/trunk@56881 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This commit removes unnecessary access and internal annotations from two functions that are private and as such don't require the annotation. It also adds the since annotation with the 6.5 release given that the annotation may be useful.
Props swissspidy.
See #60358.
Built from https://develop.svn.wordpress.org/trunk@57374
git-svn-id: http://core.svn.wordpress.org/trunk@56880 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the following third-party GitHub Actions to their latest versions:
- `actions/setup-node` from `3.8.1` to `4.0.1`
- `actions/upload-artifact` from `3.1.2` to `4.3.0`
- `shivammathur/setup-php` from `2.28.0` to `2.29.0`
- `actions/cache` from `3.3.2` to `4.0.0`
- `codecov/codecov-action` from `3.1.4` to `3.1.5`
Most notably, these updates silence newly encountered notices as a result of GitHub beginning to transition away from Node.js 16 to Node.js 20 (see https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/).
Props swissspidy.
See #59805.
Built from https://develop.svn.wordpress.org/trunk@57362
git-svn-id: http://core.svn.wordpress.org/trunk@56868 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensure logged out users are redirected to the media file when attachment pages are inactive. This removes the read_post capability check from the canonical redirects as anonymous users lack the permission.
This was previously committed in [57310] before being reverted in [57318]. This update includes a fix to cover instances where revealing a URL could be considered a data leak and greatly expands the unit tests to ensure that this is covered along with many other instances.
Follow-up to [56657], [56658], [56711], [57310], [57318].
Props peterwilsoncc, jorbin, afercia, aristath, chesio, joppuyo, jorbin, lakshmananphp, poena, sergeybiryukov, swissspidy, johnbillion.
Fixes#59866.
See #57913.
Built from https://develop.svn.wordpress.org/trunk@57357
git-svn-id: http://core.svn.wordpress.org/trunk@56863 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add a new `hooked_block_{$block_type}` filter that allows modifying a hooked block (in parsed block format) prior to insertion, while providing read access to its anchor block (in the same format).
This allows block authors to e.g. set a hooked block's attributes, or its inner blocks; the filter can peruse information about the anchor block when doing so. As such, this filter provides a solution to both #59572 and #60126.
The new filter is designed to strike a good balance and separation of concerns with regard to the existing [https://developer.wordpress.org/reference/hooks/hooked_block_types/ `hooked_block_types` filter], which allows addition or removal of a block to the list of hooked blocks for a given anchor block -- all of which are identified only by their block ''types''. This new filter, on the other hand, only applies to ''one'' hooked block at a time, and allows modifying the entire (parsed) hooked block; it also gives (read) access to the parsed anchor block.
Props gziolo, tomjcafferkey, andrewserong, isabel_brison, timbroddin, yansern.
Fixes#59572, #60126.
Built from https://develop.svn.wordpress.org/trunk@57354
git-svn-id: http://core.svn.wordpress.org/trunk@56860 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since its introduction in WordPress 6.2 the HTML Tag Processor has
provided a way to scan through all of the HTML tags in a document and
then read and modify their attributes. In order to reliably do this, it
also needed to be aware of other kinds of HTML syntax, but it didn't
expose those syntax tokens to consumers of the API.
In this patch the Tag Processor introduces a new scanning method and a
few helper methods to read information about or from each token. Most
significantly, this introduces the ability to read `#text` nodes in the
document.
What's new in the Tag Processor?
================================
- `next_token()` visits every distinct syntax token in a document.
- `get_token_type()` indicates what kind of token it is.
- `get_token_name()` returns something akin to `DOMNode.nodeName`.
- `get_modifiable_text()` returns the text associated with a token.
- `get_comment_type()` indicates why a token represents an HTML comment.
Example usage.
==============
{{{
<?php
function strip_all_tags( $html ) {
$text_content = '';
$processor = new WP_HTML_Tag_Processor( $html );
while ( $processor->next_token() ) {
if ( '#text' !== $processor->get_token_type() ) {
continue;
}
$text_content .= $processor->get_modifiable_text();
}
return $text_content;
}
}}}
What changes in the Tag Processor?
==================================
Previously, the Tag Processor would scan the opening and closing tag of
every HTML element separately. Now, however, there are special tags
which it only visits once, as if those elements were void tags without
a closer.
These are special tags because their content contains no other HTML or
markup, only non-HTML content.
- SCRIPT elements contain raw text which is isolated from the rest of
the HTML document and fed separately into a JavaScript engine. There
are complicated rules to avoid escaping the script context in the HTML.
The contents are left verbatim, and character references are not decoded.
- TEXTARA and TITLE elements contain plain text which is decoded
before display, e.g. transforming `&` into `&`. Any markup which
resembles tags is treated as verbatim text and not a tag.
- IFRAME, NOEMBED, NOFRAMES, STYLE, and XMP elements are similar to the
textarea and title elements, but no character references are decoded.
For example, `&` inside a STYLE element is passed to the CSS engine
as the literal string `&` and _not_ as `&`.
Because it's important not treat this inner content separately from the
elements containing it, the Tag Processor combines them when scanning
into a single match and makes their content available as modifiable
text (see below).
This means that the Tag Processor will no longer visit a closing tag for
any of these elements unless that tag is unexpected.
{{{
<title>There is only a single token in this line</title>
<title>There are two tokens in this line></title></title>
</title><title>There are still two tokens in this line></title>
}}}
What are tokens?
================
The term "token" here is a parsing term, which means a primitive unit in
HTML. There are only a few kinds of tokens in HTML:
- a tag has a name, attributes, and a closing or self-closing flag.
- a text node, or `#text` node contains plain text which is displayed
in a browser and which is decoded before display.
- a DOCTYPE declaration indicates how to parse the document.
- a comment is hidden from the display on a page but present in the HTML.
There are a few more kinds of tokens that the HTML Tag Processor will
recognize, some of which don't exist as concepts in HTML. These mostly
comprise XML syntax elements that aren't part of HTML (such as CDATA and
processing instructions) and invalid HTML syntax that transforms into
comments.
What is a funky comment?
========================
This patch treats a specific kind of invalid comment in a special way.
A closing tag with an invalid name is considered a "funky comment." In
the browser these become HTML comments just like any other, but their
syntax is convenient for representing a variety of bits of information
in a well-defined way and which cannot be nested or recursive, given
the parsing rules handling this invalid syntax.
- `</1>`
- `</%avatar_url>`
- `</{"wp_bit": {"type": "post-author"}}>`
- `</[post-author]>`
- `</__( 'Save Post' );>`
All of these examples become HTML comments in the browser. The content
inside the funky content is easily parsable, whereby the only rule is
that it starts at the `<` and continues until the nearest `>`. There
can be no funky comment inside another, because that would imply having
a `>` inside of one, which would actually terminate the first one.
What is modifiable text?
========================
Modifiable text is similar to the `innerText` property of a DOM node.
It represents the span of text for a given token which may be modified
without changing the structure of the HTML document or the token.
There is currently no mechanism to change the modifiable text, but this
is planned to arrive in a later patch.
Tags
====
Most tags have no modifiable text because they have child nodes where
text nodes are found. Only the special tags mentioned above have
modifiable text.
{{{
<div class="post">Another day in HTML</div>
└─ tag ──────────┘└─ text node ─────┘└────┴─ tag
}}}
{{{
<title>Is <img> > <image>?</title>
│ └ modifiable text ───┘ │ "Is <img> > <image>?"
└─ tag ─────────────────────────────┘
}}}
Text nodes
==========
Text nodes are entirely modifiable text.
{{{
This HTML document has no tags.
└─ modifiable text ───────────┘
}}}
Comments
========
The modifiable text inside a comment is the portion of the comment that
doesn't form its syntax. This applies for a number of invalid comments.
{{{
<!-- this is inside a comment -->
│ └─ modifiable text ──────┘ │
└─ comment token ───────────────┘
}}}
{{{
<!-->
This invalid comment has no modifiable text.
}}}
{{{
<? this is an invalid comment -->
│ └─ modifiable text ────────┘ │
└─ comment token ───────────────┘
}}}
{{{
<[CDATA[this is an invalid comment]]>
│ └─ modifiable text ───────┘ │
└─ comment token ───────────────────┘
}}}
Other token types also have modifiable text. Consult the code or tests
for further information.
Developed in https://github.com/WordPress/wordpress-develop/pull/5683
Discussed in https://core.trac.wordpress.org/ticket/60170
Follows [57575]
Props bernhard-reiter, dlh, dmsnell, jonsurrell, zieladam
Fixes#60170
Built from https://develop.svn.wordpress.org/trunk@57348
git-svn-id: http://core.svn.wordpress.org/trunk@56854 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Incremental import maps fail if the import map is printed after the module scripts.
This means, we should always render import maps first. This means that for classic themes, we need to move the import map and modules to the footer because we can't know before that which modules are needed.
Props luisherranz, cbravobernal.
Fixes#60240.
Built from https://develop.svn.wordpress.org/trunk@57345
git-svn-id: http://core.svn.wordpress.org/trunk@56851 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This introduces a more lightweight library for loading `.mo` translation files which offers increased speed and lower memory usage.
It also supports loading multiple locales at the same time, which makes locale switching faster too.
For plugins interacting with the `$l10n` global variable in core, a shim is added to retain backward compatibility with the existing `pomo` library.
In addition to that, this library supports translations contained in PHP files, avoiding a binary file format and leveraging OPCache if available.
If an `.mo` translation file has a corresponding `.l10n.php` file, the latter will be loaded instead.
This behavior can be adjusted using the new `translation_file_format` and `load_translation_file` filters.
PHP translation files will be typically created by downloading language packs, but can also be generated by plugins.
See https://make.wordpress.org/core/2023/11/08/merging-performant-translations-into-core/ for more context.
Props dd32, swissspidy, flixos90, joemcgill, westonruter, akirk, SergeyBiryukov.
Fixes#59656.
Built from https://develop.svn.wordpress.org/trunk@57337
git-svn-id: http://core.svn.wordpress.org/trunk@56843 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Additionally, this changeset fixes some of the `block.json` and `theme.json` files in PHPUnit tests by adding missing `title` properties to satisfy the schema. Those changes have no impact on the runtime whatsoever and do not change the result of unit tests.
Note that some block and theme JSON files still aren't valid according to the schema. Fixing is underway; the required changes will be merged subsequently.
Props jonsurrell, dmsnell, gziolo.
Fixes#60255.
Built from https://develop.svn.wordpress.org/trunk@57336
git-svn-id: http://core.svn.wordpress.org/trunk@56842 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Renames all mentions to "module" with "script module", including function names, comments, and tests.
Follow up to [57269]
The list of functions renamed are:
- `wp_module()` -> `wp_script_module()`.
- `wp_register_module()` -> `wp_register_script_module()`.
- `wp_enqueue_module()` -> `wp_enqueue_script_module()`.
- `wp_dequeue_module()` -> `wp_dequeue_script_module()`.
- `WP_Script_Modules::print_enqueued_modules()` -> `WP_Script_Modules::print_enqueued_script_modules()`.
- `WP_Script_Modules::print_module_preloads()` -> `WP_Script_Modules::print_script_module_preloads()`.
It also adds PHP 7 typing to all the functions and improves the types of the `$deps` argument of `wp_register_script_module()` and `wp_enqueue_script_module()` using `@type`.
Props luisherranz, idad5, costdev, nefff, joemcgill, jorbin, swisspidy, jonsurrel, flixos90, gziolo, westonruter, bernhard-reiter, kamranzafar4343
See #56313
Built from https://develop.svn.wordpress.org/trunk@57327
git-svn-id: http://core.svn.wordpress.org/trunk@56833 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds support for the following HTML elements to the HTML Processor:
- PARAM, SOURCE, TRACK
Previously these elements were not supported and the HTML Processor would bail when encountering them. Now, with this patch applied, it will proceed to parse an HTML document when encountering those tags.
Props jonsurrell, dmsnell
Fixes#60283
Built from https://develop.svn.wordpress.org/trunk@57326
git-svn-id: http://core.svn.wordpress.org/trunk@56832 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that the message about deleting a plugin or having no plugins installed is displayed in full width.
Follow-up to [26134], [33016].
Props shailu25, mukesh27, passoniate, JavierCasares, sabernhardt.
Fixes#50069.
Built from https://develop.svn.wordpress.org/trunk@57321
git-svn-id: http://core.svn.wordpress.org/trunk@56827 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This patch adds newly supported elements to tests that should have been updated
in recent PRs, but which were merged without that. Those PRs removed failing
tests showing that the elements were unsupported, but did not add the elements
to the list of supported ones.
It also removes some elements from the special-exclusion list of unsupported IN
BODY elements. These did not present in failing tests because earlier
conditions in the switch structure caught the tags before hitting the default
block.
Finally it adds some missing elements to the list of void elements. These
elements are not listed as void in the HTML specification because they are
deprecated. However, they are treated as void for the sake of HTML
serialization and the parsing rules indicate that they behave as void elements,
so it's safe to list them within the HTML API as void.
Developed in WordPress/wordpress-develop#5913
Fixes#60307
Built from https://develop.svn.wordpress.org/trunk@57319
git-svn-id: http://core.svn.wordpress.org/trunk@56825 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds support for the following HTML elements to the HTML Processor:
- PRE, LISTING
Previously, these elements were not supported and the HTML Processor would bail when encountering them. Now, with this patch applied, it will proceed to parse an HTML document when encountering those tags.
Developed in WordPress/wordpress-develop#5903
Props jonsurrell, dmsnell
Fixes#60283
Built from https://develop.svn.wordpress.org/trunk@57317
git-svn-id: http://core.svn.wordpress.org/trunk@56823 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds support for the following HTML elements to the HTML Processor:
- AREA, BR, EMBED, KEYGEN, WBR
- Only the opening BR tag is supported, as the invalid closer `</br>`
involves more complicated rules, to be implemented later.
Previously, these elements were not supported and the HTML Processor
would bail when encountering them. With this patch it will proceed to
parse an HTML document when encountering those tags as long as other
normal conditions don't cause it to bail (such as complicated format
reconstruction rules).
Props jonsurrell, dmsnell
Fixes#60283
Built from https://develop.svn.wordpress.org/trunk@57316
git-svn-id: http://core.svn.wordpress.org/trunk@56822 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When registering blocks on the server using `register_block_type()` or similar functions, a set of block type variations can also be registered. However, in some cases building this variation data during block registration can be an expensive process, which is not needed in most contexts.
To address this problem, this adds support to the `WP_Block_Type` object for a new property, `variation_callback`, which can be used to register a callback for building variation data only when the block variations data is needed. The `WP_Block_Type::variations` property has been changed to a private property that is now accessed through the magic `__get()` method. The magic getter makes use of a new public method, `WP_Block_Type::get_variations` which will build variations from a registered callback if variations have not already been built.
Props spacedmonkey, thekt12, Mamaduka, gaambo, gziolo, mukesh27, joemcgill.
Fixes#59969.
Built from https://develop.svn.wordpress.org/trunk@57315
git-svn-id: http://core.svn.wordpress.org/trunk@56821 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds support for the following HTML elements to the HTML Processor:
- HR
Previously, this element was not supported and the HTML Processor would bail when encountering
it. Now, with this patch, it will proceed to parse an HTML document when encountering one.
Developed in WordPress/wordpress-develop#5897
Props jonsurrell, dmsnell
Fixes#60283
Built from https://develop.svn.wordpress.org/trunk@57314
git-svn-id: http://core.svn.wordpress.org/trunk@56820 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset introduces two functions:
* `wp_is_serving_rest_request()` returns a boolean for whether WordPress is serving an actual REST API request.
* `wp_is_rest_endpoint()` returns a boolean for whether a WordPress REST API endpoint is currently being used. While this is always the case if `wp_is_serving_rest_request()` returns `true`, the function additionally covers the scenario of internal REST API requests, i.e. where WordPress calls a REST API endpoint within the same request.
Both functions should only be used after the `parse_request` action.
All relevant manual checks have been adjusted to use one of the new functions, depending on the use-case. They were all using the same constant check so far, while in fact some of them were intending to check for an actual REST API request while others were intending to check for REST endpoint usage.
A new filter `wp_is_rest_endpoint` can be used to alter the return value of the `wp_is_rest_endpoint()` function.
Props lots.0.logs, TimothyBlynJacobs, flixos90, joehoyle, peterwilsoncc, swissspidy, SergeyBiryukov, pento, mikejolley, iandunn, hellofromTonya, Cybr, petitphp.
Fixes#42061.
Built from https://develop.svn.wordpress.org/trunk@57312
git-svn-id: http://core.svn.wordpress.org/trunk@56818 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensure logged out users are redirected to the media file when attachment pages are inactive. This removes the `read_post` capability check from the canonical redirects as anonymous users lack the permission.
Follow-up to [56657], [56658], [56711].
Props afercia, aristath, chesio, joppuyo, jorbin, lakshmananphp, poena, sergeybiryukov.
Fixes#59866.
See #57913.
Built from https://develop.svn.wordpress.org/trunk@57310
git-svn-id: http://core.svn.wordpress.org/trunk@56816 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since the cache key in `::get_language_files_from_path()` is based on a path that always includes a trailing slash, the path in `::invalidate_mo_files_cache()` should include the trailing slash as well.
Includes adjusting the test expectations accordingly.
Follow-up to [57287], [57290], [57298].
See #58919.
Built from https://develop.svn.wordpress.org/trunk@57299
git-svn-id: http://core.svn.wordpress.org/trunk@56805 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove the `action` attribute in the login language selector, privacy forms, and classic widget forms.
An empty `action` attribute is invalid HTML4 and unsupported HTML5. The `action` attribute is optional, but must have a valid URL when provided.
Props Malae, audrasjb, bartkleinreesink, nicolefurlan, shubhamsedani, costdev, peterwilsoncc, rajinsharwar, joedolson.
Fixes#58226.
Built from https://develop.svn.wordpress.org/trunk@57295
git-svn-id: http://core.svn.wordpress.org/trunk@56801 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prior to this changeset, WordPress core would use the original image size, which in the particular case of inline images would be severely off, as they are usually very small. This could lead to incorrect application of `fetchpriority="high"` and other performance optimizations.
Props westonruter, flixos90, joemcgill, mukesh27.
Fixes#59352.
Built from https://develop.svn.wordpress.org/trunk@57294
git-svn-id: http://core.svn.wordpress.org/trunk@56800 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Loading a list of language file paths using `glob()` can be expensive if involving thousands of files.
Expands scope of `WP_Textdomain_Registry` to cache list of language file paths in object cache and provides a way to invalidate that cache upon translation updates. Plugins can clear the cache using calls such as `wp_cache_delete( 'cached_mo_files_' . md5( $path ), 'translations' );`
Props mreishus, swissspidy
Fixes#58919
Built from https://develop.svn.wordpress.org/trunk@57287
git-svn-id: http://core.svn.wordpress.org/trunk@56793 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Blocks registration causes scripts to be initialized and localized very early, before the current locale has been properly set on the installation page.
This changes `determine_locale()` so that the locale chosen during installation is recognized and loaded earlier, ensuring proper script localization.
Props sabernhardt, NekoJonez, jornp, costdev.
Fixes#58696
Built from https://develop.svn.wordpress.org/trunk@57286
git-svn-id: http://core.svn.wordpress.org/trunk@56792 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset introduces the `new_admin_email_subject` hook which allow developers to filter the subject of the email sent when a change of site admin email address is attempted.
Props MadtownLems, johnbillion, alexanderkoledov, shooper, Marc_J, nikmeyer, xlthlx, devmuhib, nuhel, audrasjb.
Fixes#59250.
Built from https://develop.svn.wordpress.org/trunk@57283
git-svn-id: http://core.svn.wordpress.org/trunk@56789 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset adds missing text domain to block patterns in Twenty Sixteen, Twenty Seventeen and Twenty Twenty-Four.
Follow-up to [49583] (Twenty Sixteen), [49584] (Twenty Seventeen) and [56716] (Twenty Twenty-Four.)
Props shailu25, sabernhardt.
Fixes#60245.
Built from https://develop.svn.wordpress.org/trunk@57281
git-svn-id: http://core.svn.wordpress.org/trunk@56787 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Remove the `maxlength` attribute on screen options number of items per page input. Previously kept due to input inconsistencies in IE 11 and Edge, this invalid usage is no longer needed. IE 11 is no longer supported, and Edge now behaves according to specifications.
Props Arena94, afercia, joedolson.
Fixes#40610.
Built from https://develop.svn.wordpress.org/trunk@57272
git-svn-id: http://core.svn.wordpress.org/trunk@56778 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset adds a new API for WordPress, designed to work with native ES Modules and Import Maps. It introduces functions such as `wp_register_module`, and `wp_enqueue_module`.
The API aims to provide a familiar experience to the existing `WP_Scripts` class, offering similar functionality. However, **it's not intended to duplicate the exact functionality of `WP_Scripts`**; rather, it is carefully tailored to address the specific needs and capabilities of ES modules.
For this initial version, **the current proposal is intentionally simplistic**, covering only the essential features needed to work with ES modules. Other enhancements and optimizations can be added later as the community identifies additional requirements and use cases.
== Differences Between WP_Script_Modules and WP_Scripts
=== Dependency Specification
With `WP_Script_Modules`, the array of dependencies supports not only strings but also arrays that include the dependency import type (`static` or `dynamic`). This design choice allows for future extensions of dependency properties, such as adding a `version` property to support "scopes" within import maps.
=== Module Identifier
Instead of a handle, `WP_Script_Modules` utilizes the module identifier, aligning with the module identifiers used in JavaScript files and import maps.
=== Deregistration
There is no equivalent of `wp_deregister_script` at this stage.
== API
=== `wp_register_module( $module_identifier, $src, $deps, $version )`
Registers a module.
{{{
// Registers a module with dependencies and versioning.
wp_register_module(
'my-module',
'/path/to/my-module.js',
array( 'static-dependency-1', 'static-dependency-2' ),
'1.2.3'
);
}}}
{{{
// my-module.js
import { ... } from 'static-dependency-1';
import { ... } from 'static-dependency-2';
// ...
}}}
{{{
// Registers a module with a dynamic dependency.
wp_register_module(
'my-module',
'/path/to/my-module.js',
array(
'static-dependency',
array(
'id' => 'dynamic-dependency',
'import' => 'dynamic'
),
)
);
}}}
{{{
// my-module.js
import { ... } from 'static-dependency';
// ...
const dynamicModule = await import('dynamic-dependency');
}}}
=== `wp_enqueue_module( $module_identifier, $src, $deps, $version )`
Enqueues a module. If a source is provided, it will also register the module.
{{{
wp_enqueue_module( 'my-module' );
}}}
=== `wp_dequeue_module( $module_identifier )`
Dequeues a module.
{{{
wp_dequeue_module( 'my-module' );
}}}
== Output
- When modules are enqueued, they are printed within script tags containing `type="module"` attributes.
- Additionally, static dependencies of enqueued modules utilize `link` tags with `rel="modulepreload"` attributes.
- Lastly, an import map is generated and inserted using a `<script type="importmap">` tag.
{{{
<script type="module" src="/path/to/my-module.js" id="my-module"></script>
<link rel="modulepreload" href="/path/to/static-dependency.js" id="static-dependency" />
<script type="importmap">
{
"imports": {
"static-dependency": "/path/to/static-dependency.js",
"dynamic-dependency": "/path/to/dynamic-dependency.js"
}
}
</script>
}}}
== Import Map Polyfill Requirement
Even though all major browsers already support import maps, an import map polyfill is required until the percentage of users using old browser versions without import map support drops significantly.
This work is ongoing and will be added once it's ready. Progress is tracked in #60232.
Props luisherranz, idad5, costdev, neffff, joemcgill, jorbin, swissspidy, jonsurrell, flixos90, gziolo, westonruter.
Fixes#56313.
Built from https://develop.svn.wordpress.org/trunk@57269
git-svn-id: http://core.svn.wordpress.org/trunk@56775 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The exif standards expect the UserComment field to be used as a substitute for ImageDescription if multibyte characters are needed. WordPress media only mapped the ImageDescription field and did not correctly handle descriptions with multibyte characters.
Fix metadata saving to better handle media with multibyte characters in metadata and update unit tests.
Props fotodrachen, antpb, joedolson, mikinc860, azaozz, nicolefurlan.
Fixes#58082.
Built from https://develop.svn.wordpress.org/trunk@57267
git-svn-id: http://core.svn.wordpress.org/trunk@56773 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds support for the following HTML elements to the HTML Processor:
- LI, OL, UL.
- DD, DL, DT.
Previously, these elements were not supported and the HTML Processor would bail when encountering them.
With this patch it will proceed to parse an HTML document when encountering those tags as long as other normal conditions don't cause it to bail (such as complicated format reconstruction).
Props audrasjb, jonsurrell, bernhard-reiter.
Fixes#60215.
Built from https://develop.svn.wordpress.org/trunk@57264
git-svn-id: http://core.svn.wordpress.org/trunk@56770 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds happy (integer) and unhappy (non-integer) tests for validating the priority call order for:
* `do_action()`
* `WP_Hook::do_action()`
* `apply_filters()`
* `WP_Hook::apply_filters()`
As each of these functions have differing code, the tests are added to each to ensure expected results and protect against future regressions.
Follow-up to [53804], [52010], [25002], [25/tests], [62/tests].
Props hellofromTonya, mukesh27, dd32, valendesigns, drrobotnik.
Fixes#60193.
Built from https://develop.svn.wordpress.org/trunk@57257
git-svn-id: http://core.svn.wordpress.org/trunk@56763 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, bulk upgrades did not verify that a theme package was compatible with the site's WordPress version or the server's PHP version.
This was previusly done for plugins in #59198, but themes were missed.
Follow-up to: [56525].
Props salcode, lakshmananphp.
Fixes#59758.
Built from https://develop.svn.wordpress.org/trunk@57252
git-svn-id: http://core.svn.wordpress.org/trunk@56758 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When inserting a new term in the database, `wp_insert_term()` will check if the term is empty and return a corresponding error.
Afterwards the term is sanitized and inserted in the database. However, there is a chance the term is empty after the DB sanitization.
This commit adds a check for an empty term name after the term is sanitized, returning an error in that case.
Follow-up to [5726], [8393].
Props fgiannar, kraftbj.
Fixes#59995.
Built from https://develop.svn.wordpress.org/trunk@57251
git-svn-id: http://core.svn.wordpress.org/trunk@56757 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The HTML API HTML processor does not yet support all tags. Many tags (e.g. list elements) have some complicated rules in the [https://html.spec.whatwg.org/#parsing-main-inbody "in body" insertion mode].
Implementing these special rules is blocking the implementation for a catch-all rule for "any other tag" because we need to prevent special rules from being handled by the catch-all.
Any other start tag
Reconstruct the active formatting elements, if any.
Insert an HTML element for the token.
…
This change ensures the HTML Processor fails when handling special tags. This is the same as existing behavior, but will allow us to implement the catch-all "any other tag" handling without unintentionally handling special elements.
Additionally, we add tests that assert the special elements are unhandled. As these tags are implemented, this should help to ensure they're removed from the unsupported tag list.
Props jonsurrell, dmsnell.
Fixes#60092.
Built from https://develop.svn.wordpress.org/trunk@57248
git-svn-id: http://core.svn.wordpress.org/trunk@56754 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that not only the return values match the expected results, but also that their type is the same.
Going forward, stricter type checking by using `assertSame()` should generally be preferred to `assertEquals()` where appropriate, to make the tests more reliable.
Follow-up to [55859], [56380], [56802], [57115], [57129], [57185].
See #59655.
Built from https://develop.svn.wordpress.org/trunk@57244
git-svn-id: http://core.svn.wordpress.org/trunk@56750 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The phrase "sanity check" unnecessarily references mental health. It's an old phrase used to denote an extra step in verifying code works as expected.
“The WordPress open source community cares about diversity. We strive to maintain a welcoming environment where everyone can feel included.”
While "sanity check" is a well-known phrase with a specific meaning, "confidence check" is a direct replacement that is more clear of its intent while being more inclusive.
Words matter.
Follow-up to [49216], [46271], [40583], [38832], [38637], [37409], [33359], [32162], [30346], [30345], [30238], [30055], [29902], [28763], [26141], [25002], [22227], [13428], [12148], [11025], [8927].
Props dartiss, hellofromTonya.
Fixes#60187.
Built from https://develop.svn.wordpress.org/trunk@57239
git-svn-id: http://core.svn.wordpress.org/trunk@56745 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that the correct number of arguments is passed to post trash hooks in `WP_Customize_Manager::trash_changeset_post()`, which bypasses `wp_trash_post()`.
Follow-up to [56043].
Props joelcj91, mukesh27.
Fixes#60183.
Built from https://develop.svn.wordpress.org/trunk@57238
git-svn-id: http://core.svn.wordpress.org/trunk@56744 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Update copyright year to 2024 in `license.txt` and bundled themes.
Follow-up to [18201], [23306], [28064], [36855], [36856], [39659], [40241], [42424], [46719], [46720], [47025], [47026], [49915], [52427], [55024].
Built from https://develop.svn.wordpress.org/trunk@57235
git-svn-id: http://core.svn.wordpress.org/trunk@56741 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This avoids a PHP warning or error when viewing an author on the front end, while an array is passed as `$_GET['author']`.
Follow-up to [12034], [12040], [12202].
Props david.binda, antonvlasenko, azaozz, SergeyBiryukov.
Fixes#60059.
Built from https://develop.svn.wordpress.org/trunk@57232
git-svn-id: http://core.svn.wordpress.org/trunk@56738 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`clipboard.js` used to suffer from a bug that triggered a focus loss when activating the Copy buttons. The bug was fixed a while ago with the `clipboard.js` 2.0.11 release so that the workaround implemented in WordPress is no longer necessary.
Props dhrumilk, paulkevan, afercia.
Fixes#60139.
Built from https://develop.svn.wordpress.org/trunk@57231
git-svn-id: http://core.svn.wordpress.org/trunk@56737 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When the JSON data files that supply the PHP/MySQL version support to the installation test workflow are changed, the workflow should be run to confirm the changes are correct. This updates the `path` filtering rules to ensure this happens.
Follow up to [57218], [57219].
See #58977.
Built from https://develop.svn.wordpress.org/trunk@57220
git-svn-id: http://core.svn.wordpress.org/trunk@56726 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [56661], a new GitHub Actions workflow was introduced that focused on running some minimal installation tests for a version of WordPress for every PHP and MySQL combination.
This workflow has tested well, but lacks flexibility and possesses one flaw: tests are only ever performed with currently supported versions, even if the version being tested had a different support policy.
This updates the workflow to be more flexible, allowing all versions of WordPress currently receiving security fixes (back through 4.1) to be tested under the correct support policy.
Additionally, the workflow can now run against the `nightly` build of WordPress. This replaces `latest` as the new default. This allows the tests to be run at any point during a release cycle without the need for an officially tagged version.
Props jorbin, joemcgill, costdev.
See #58977.
Built from https://develop.svn.wordpress.org/trunk@57218
git-svn-id: http://core.svn.wordpress.org/trunk@56724 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This avoids redundant recursive lookups for block template paths in the same base directory by implementing a static cache. It also replaces an potentially expensive `file_exists` call in favor of doing recursive iteration of files inside a try/catch block.
Props thekt12, spacedmonkey, flixos90, mukesh27, joemcgill.
Fixes#58196.
Built from https://develop.svn.wordpress.org/trunk@57215
git-svn-id: http://core.svn.wordpress.org/trunk@56721 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds the `engines` field to the `package.json` file for the three default themes with build processes in order to encourage consistent tooling for contributors.
Some minor dependency updates for these themes are also included in this change.
Props jorbin, joemcgill, swissspidy.
See #59663.
Built from https://develop.svn.wordpress.org/trunk@57213
git-svn-id: http://core.svn.wordpress.org/trunk@56719 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This bumps the minimum required version of Node.js/npm from 16.19.1 and 8.19.3 to 20.10.0 and 10.2.3.
Since 20.10.0 is the latest 20.x version of Node.js, the `check-latest` option has been enabled for `actions/setup-node` in GitHub Actions workflows. This performs an additional external call to the Node.js API confirming the latest version is installed on the runner for use. In testing, it seems that 20.10.0 was not consistently deployed to all runner machines in use. This should be removed in the near future when the version of Node.js is reliably above the new minimum requirement.
The Gutenberg repository has also been updated to use the same values for `engines`.
Props jorbin, joemcgill, swissspidy, benharri, dhrupo, flootr, gziolo, noahtallen.
See #59663.
Built from https://develop.svn.wordpress.org/trunk@57212
git-svn-id: http://core.svn.wordpress.org/trunk@56718 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Currently the Tag Processor assumes that an input document is a ''full'' HTML document. Because of this, if there's lingering content after the last tag match it will treat that content as plaintext and skip over it. This is fine for the Tag Processor because if there is lingering content that isn't a valid tag then there's nothing for `next_tag()` to match.
However, in order to support a number of feature expansions it is important to recognize that the remaining content ''may'' involve partial syntax elements, such as incomplete tags, attributes, or comments.
In this patch we're adding a mode inside the Tag Processor which will flip when we start parsing HTML syntax but the document finishes before the token does. This will provide the ability to:
- extend the input document,
- avoid misinterpreting syntax as text, and
- guess if we have a complete document, know if we have an incomplete document.
In the process of building this patch a few fixes were identified and fixed in the Tag Processor, namely in the handling of incomplete syntax elements.
Props dmsnell, jonsurrell.
Fixes#60122, #60108.
Built from https://develop.svn.wordpress.org/trunk@57211
git-svn-id: http://core.svn.wordpress.org/trunk@56717 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds a bit more context to the E2E workflow artifact names in order to avoid duplicates being uploaded.
With the update to v4 of `actions/upload-artifact` in [57197], artifacts are now uploaded on a per job basis. Multiple jobs cannot upload the same artifact.
Props johnbillion.
See #59805.
Built from https://develop.svn.wordpress.org/trunk@57203
git-svn-id: http://core.svn.wordpress.org/trunk@56711 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the following GitHub Actions to their latest versions:
- `actions/checkout`
- `actions/setup-node`
- `actions/upload-artifact`
- `actions/cache`
- `actions/github-script`
- `shivammathur/setup-php`
See #59805.
Built from https://develop.svn.wordpress.org/trunk@57197
git-svn-id: http://core.svn.wordpress.org/trunk@56708 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously these have been unsupported, but in this patch, support is added for the tags so that the HTML Processor can process documents containing them.
There was a design discussion about introducing a constant to communicate "any of the H1 - H6 elements" but this posed a number of challenges that don't need to be answered in this patch. For the time being, because the HTML specification treats H1 - H6 specially as a single kind of element, the HTML Processor uses an internal hard-coded string to indicate this. By using a hard-coded string it's possible to avoid introducing a class constant which cannot be made private due to PHP's class design. In the future, this will probably appear as a special constant in a new constant-containing class.
Props dmsnell, jonsurrell.
Fixes#60060.
Built from https://develop.svn.wordpress.org/trunk@57186
git-svn-id: http://core.svn.wordpress.org/trunk@56697 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [50941] the version of lodash was updated, however the version inside `wp_default_packages_vendor` was not updated at the same time. This updates the version to correctly reflect the version that is loaded.
Also adds some basic tests for the scripts in `wp_default_packages_vendor` that match the name of the package from package.json to help prevent errors like this in the future.
Props jadpm, jorbin, swissspidy.
Fixes#60048. See #52991.
Built from https://develop.svn.wordpress.org/trunk@57185
git-svn-id: http://core.svn.wordpress.org/trunk@56696 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Updates the internal representation of the text span coordinates. The mixture of (offset, length) and (start, end) coordinates becomes confusing, this commit replaces it with a (offset, length) pair. There should be no functional or behavioral changes in this patch. For the internal helper classes this patch introduces breaking changes, but those classes are marked private and should not be used outside of the HTML API itself.
Props dmsnell.
Fixes#59993.
Built from https://develop.svn.wordpress.org/trunk@57179
git-svn-id: http://core.svn.wordpress.org/trunk@56690 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that `WP_REST_Comments_Controller::prepare_item_for_response()` passes three arguments to the `comment_text` filter, for consistency with all the other instances in core.
Follow-up to [15957], [16357], [25555], [38832], [40664].
Props sjregan, SergeyBiryukov.
Fixes#58238.
Built from https://develop.svn.wordpress.org/trunk@57176
git-svn-id: http://core.svn.wordpress.org/trunk@56687 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fixes a problem in WordPress artifact upload pipeline. The callable-test-core-build-process.yml used to zip the WordPress dist directory after npm run grunt clean runs, producing an empty zip file. This commit moves the zip before the cleanup task.
Follow up to [57124].
Props ockham, dmsnell.
See #59416.
Built from https://develop.svn.wordpress.org/trunk@57174
git-svn-id: http://core.svn.wordpress.org/trunk@56685 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This raises the minimum version of MySQL required to run WordPress from 5.0 to 5.5.5.
MySQL 5.0 and 5.1 have long been unsupported and both reached end of life over 10 years ago. Combined usage for both versions sits at 0.4% of all WordPress sites.
Because 5.5 sits at just under 15% usage, 5.5 cannot be trimmed off at this time.
Of all sites running 5.5.x, 85% are running 5.5.5, and 100% are running 5.5.5 or higher. This makes it the logical landing spot.
Props johnbillion, sergeybiryukov, jorbin.
Fixes#60036.
Built from https://develop.svn.wordpress.org/trunk@57173
git-svn-id: http://core.svn.wordpress.org/trunk@56684 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is a very minor, yet simple performance optimization in a commonly called function, avoiding unnecessary initialization of the `$url` variable when it may not be needed. The conditional is simple enough to not use a variable altogether.
Props Cybr, swissspidy.
Fixes#59450.
Built from https://develop.svn.wordpress.org/trunk@57170
git-svn-id: http://core.svn.wordpress.org/trunk@56681 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This matches a similar conditional in `wp-admin/menu-header.php`, where these values are handled as special cases and don't output the default menu image so that an icon could be added to `div.wp-menu-image` as CSS background.
Follow-up to [9578], [21877], [26664].
Props andrewleap, ironprogrammer, azaozz.
Fixes#58361.
Built from https://develop.svn.wordpress.org/trunk@57159
git-svn-id: http://core.svn.wordpress.org/trunk@56670 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The biggest tradeoff that was made in the implementation of Block Hooks was that they were limited to layouts (i.e. templates, template parts, and patterns) that ''didn't have any user modifications'' (see #59313 for the reason). This changeset is a preparatory step to remove this limitation, so they’ll eventually also work with user-modified layouts.
The crucial problem to solve is how to acknowledge that a user has opted to remove or persist a hooked block, so that the auto-insertion mechanism won't run again and inject an extraneous hooked block on the frontend when none is solicited.
This is achieved by storing all known blocks hooked to a given anchor block in the `metadata` attribute on that anchor block; specifically in a field called `ignoredHookedBlocks` inside of the `metadata`. Hooked blocks are only rendered on the frontend if they're absent from that field; OTOH, they're injected into that field (via the REST API) when first loaded in the editor.
This simple logic guarantees that once a user modifies a given layout, those changes are respected on the frontend; yet if a plugin that includes a hooked block is activated after those modifications have taken place, the hooked block will be rendered on the frontend. This new technique supplants the one previously used (i.e. rendering hooked blocks on the frontend only if a layout doesn't have any modifications) in a rather direct way.
Note that this changeset only introduces the new metadata field and relevant logic; it does not yet enable hooked block insertion into modified layouts. That will be done in a subsequent step (see #59646).
Props gziolo.
Closes#60008.
Built from https://develop.svn.wordpress.org/trunk@57157
git-svn-id: http://core.svn.wordpress.org/trunk@56668 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Alongside [57153], this reduces unnecessarily autoloaded data from inactive themes, which can contribute to slow database performance as part of excessive autoloading. This changeset specifically resolves the issue for existing sites.
Props mukesh27, joemcgill, swissspidy, westonruter, flixos90.
Fixes#59975.
See #39537.
Built from https://develop.svn.wordpress.org/trunk@57155
git-svn-id: http://core.svn.wordpress.org/trunk@56666 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This reduces unnecessarily autoloaded data from inactive themes, which can contribute to slow database performance as part of excessive autoloading.
Props mukesh27, rajinsharwar, igmoweb, joemcgill, swissspidy, westonruter, flixos90.
Fixes#59537.
See #59975.
Built from https://develop.svn.wordpress.org/trunk@57153
git-svn-id: http://core.svn.wordpress.org/trunk@56664 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the test strategy matrix in the PHPUnit test GitHub Actions workflow to include the most recent MariaDB release, 11.2.
While 11.0 and 11.1 are still maintained, all three are short-term stable releases, which see support dropped after 1 year.
Until a larger discussion around how the project supports database software releases with shorter support windows takes place (short-term in MariaDB or “innovation” releases in MySQL), testing only against the latest short-term release should be sufficient.
Props johnbillion, l1nuxjedi.
See #59806.
Built from https://develop.svn.wordpress.org/trunk@57152
git-svn-id: http://core.svn.wordpress.org/trunk@56663 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This allows third-party plugins to write their own factory extending `WP_UnitTest_Factory` for testing purposes, as well as benefit from `WP_UnitTestCase_Base` features.
Follow-up to [35186], [35225], [35242].
Props hugod.
Fixes#59999.
Built from https://develop.svn.wordpress.org/trunk@57149
git-svn-id: http://core.svn.wordpress.org/trunk@56660 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that the update counter bubble in the admin menu is properly decreased after a successful plugin or theme update from within the update iframe when the site uses a non-standard port number.
Follow-up to [27280], [29357].
Props TobiasBg.
Fixes#59987.
Built from https://develop.svn.wordpress.org/trunk@57148
git-svn-id: http://core.svn.wordpress.org/trunk@56659 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Restores setting the site's logo, icon, and wp-admin's back button image (which defaults to W).
Prior to [56566], the site logo and icon were unconditionally added to the index. [56566] changed this by conditionally adding them if either the `_links` or `_embedded` fields were included. However, these fields are not included when using the Site Logo block, as it uses the `site_logo`, `site_icon`, and `site_icon_url` fields instead.
This changeset restores the functionality by checking specifically for the `site_*` fields when neither of the `_links` or `_embedded` fields are present.
Follow up to [56566].
Props antonvlasenko, hellofromTonya, ironprogrammer, priethor, wildworks.
Fixes#59935.
Built from https://develop.svn.wordpress.org/trunk@57147
git-svn-id: http://core.svn.wordpress.org/trunk@56658 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When JavaScript is disabled, the Add Plugins screen's search button position was too high in comparison to the search text field. This fix reuses the CSS declaration to keep field and button aligned.
By targeting the `.no-js` class, the CSS specificity is not impacted when JavaScript is enabled.
Follow up to [48281], [30830].
Props devmuhib, sabernhardt, huzaifaalmesbah, hellofromTonya.
Fixes#59967.
Built from https://develop.svn.wordpress.org/trunk@57144
git-svn-id: http://core.svn.wordpress.org/trunk@56655 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When the `wp_login_errors` filter is used to add an error message followed by an instructional message, the former was not displayed and the latter was errouneously displayed twice above the login form.
This commit ensures that the error message is displayed as expected.
Follow-up to [56654].
Props mapumba.
Fixes#59983.
Built from https://develop.svn.wordpress.org/trunk@57142
git-svn-id: http://core.svn.wordpress.org/trunk@56653 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This aims to slightly improve performance by checking the faster `empty()` language construct first and potentially avoiding an unnecessary function call. Additionally, this better matches a similar conditional a few lines below.
Follow-up to [17757], [17770].
Props Cybr.
See #59650.
Built from https://develop.svn.wordpress.org/trunk@57139
git-svn-id: http://core.svn.wordpress.org/trunk@56650 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is a maintenance and feature release, adding support for the official release of PHP 8.3, methods for removing and replacing custom headers, XCLIENT support, and links to a new way of implementing XOAUTH2 authentication.
The only change likely to have any impact on existing code is that PHPMailer previously attempted to use opportunistic STARTTLS encryption when connecting to `localhost`, which was unlikely to work. The workaround required setting `SMTPAutoTLS = false`, but that's no longer required. You may still need to use this setting when connecting to literal IPs.
References:
* [https://github.com/PHPMailer/PHPMailer/releases/tag/v6.9.1 PHPMailer 6.9.1 release notes]
* [https://github.com/PHPMailer/PHPMailer/compare/v6.8.1...v6.9.1 Full list of changes in PHPMailer 6.9.1]
Follow-up to [50628], [50799], [51169], [51634], [51635], [52252], [52749], [52811], [53500], [53535], [53917], [54427], [54937], [55557], [56484].
Props jrf, Synchro.
Fixes#59966.
Built from https://develop.svn.wordpress.org/trunk@57137
git-svn-id: http://core.svn.wordpress.org/trunk@56648 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The MySQL project has introduced a new versioning strategy with two types of releases: innovation and long-term support. While long-term support is a familiar concept, it’s not clear how innovation releases should be supported in various WordPress versions for a number of reasons.
Mainly, innovation releases are very short-lived. Each one is only supported until the next innovation version is released with a goal of one per quarter. Even though these versions will have a short lifespan they are described as producton-grade and generally available.
More discussion is needed to determine exactly how each WordPress release should support these new innovation releases. But while the parameters for proper support are determined, the PHPUnit tests can be run against these innovation releases to detect any potential problems or incompatibilities.
This change adds the `8.1` and `8.2` innovation releases to the testing matrix for the PHPUnit test worfklow.
Props johnbillion, jorbin.
See #59779.
Built from https://develop.svn.wordpress.org/trunk@57132
git-svn-id: http://core.svn.wordpress.org/trunk@56643 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`wp_json_encode()` is a wrapper for the PHP native `json_encode()` function with some extra safety checks.
This commit renames the `$data` parameter in the `wp_json_encode()` function and associated functions to `$value`, and the `$options` parameter to `$flags` for parity with the parameter names used in PHP Core.
Reference: [https://www.php.net/manual/en/function.json-encode.php PHP Manual: json_encode()].
Follow-up to [30055].
Props jrf, hellofromTonya.
Fixes#59630.
Built from https://develop.svn.wordpress.org/trunk@57130
git-svn-id: http://core.svn.wordpress.org/trunk@56641 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes bugs introduced in [56635] whereby the template or stylesheet path could be memoized incorrectly if `get_template_directory()` or `get_stylesheet_directory()` were called before the theme has been fully initialized.
Props partyfrikadelle, coreyw, kdowns, rebasaurus, meta4, flixos90, mukesh27, joemcgill.
Fixes#59847.
Built from https://develop.svn.wordpress.org/trunk@57129
git-svn-id: http://core.svn.wordpress.org/trunk@56640 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This commit updates the `submit_button()` function to standardize the default values of `$text` and `$other_attributes` parameters. Previously set to `null`, these defaults have now been changed to an empty string (`''`), bringing consistency with the `get_submit_button()` function, which `submit_button()` wraps.
The change maintains backward compatibility, as `get_submit_button()` does not perform strict type-checking on these parameters. This update aligns with the ongoing effort to standardize function parameters across the WordPress codebase, improving the readability and predictability of the core functions.
Follow-up to [31446].
Props andbalashov.
Fixes#59921.
Built from https://develop.svn.wordpress.org/trunk@57128
git-svn-id: http://core.svn.wordpress.org/trunk@56639 1a063a9b-81f0-0310-95a4-ce76da25c4cd
After [56958], pull requests to `wordpress-develop` can be tested within a WordPress Playground instance. However this capability is not obvious.
This makes several updates to GitHub action workflows to avoid unnecessary extra runs/jobs while also commenting on pull requests with proper context for testing in Playground once a build is available for the PR.
Changes:
- The `build.yml` workflow has been deleted. The WordPress build process is already being tested within the `test-build-processes.yml` workflow. Now that workflow will produce and upload the built artifact for the given PR.
- A `pull-request-comments.yml` workflow has been added to handle the commenting. To avoid having multiple workflows that comment on PRs, the logic within the `welcome-new-contributors.yml` workflow has been merged into this one.
- The `pull_request` event trigger lacks the needed permission to comment on or update pull requests. Instead of using `pull_request_target` to navigate around this, the `test-build-processes.yml` workflow will now use `workflow_dispatch` to initiate a run of the commenting workflow. This adds the ability to only comment on the PR when a build has been successfully created and uploaded as an artifact.
Props swissspidy, zieladam, jeffpaul.
See #59416.
Built from https://develop.svn.wordpress.org/trunk@57124
git-svn-id: http://core.svn.wordpress.org/trunk@56635 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This aims to:
* Perform the checks as early as possible to avoid redundant function calls.
* Remove an empty conditiaonal branch and make the exit conditions clearer.
* Bring the formatting in line with other multi-line conditionals in core.
Follow-up to [56836].
See #59650.
Built from https://develop.svn.wordpress.org/trunk@57123
git-svn-id: http://core.svn.wordpress.org/trunk@56634 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In preparation for updating Core to use Node.js version 18.x, this updates the dependancies for the Twenty Twenty-One theme to the latest versions. This addresses an unsupported engine warning where packages within the dependency tree did not support Node.js > 16.x.
All changes to built files are included in this commit. These changes are a result of the following:
- Identical sets of properties for multiple selectors are now consolidated into one.
- The removal of a duplicate `--branding--description--font-family` definition.
- The addition of the `postcss-discard-empty` dependency, which removes empty CSS rules within IE stylesheets after the previous consolidation is performed.
- `stylelint` has only been updated to 14.x (15.x is the latest). This is because `@wordpres/stylelint-config` currently has a version constraint of `^14.2` and does not properly support 15.x.
The last change of note is the new configuration for the `value-keyword-case` rule in `.stylelint-css.json`. This was added as a way to prevent the `currentColor` from being changed to all lowercase.
Props jorbin, poena.
See #59663, #59658.
Built from https://develop.svn.wordpress.org/trunk@57122
git-svn-id: http://core.svn.wordpress.org/trunk@56633 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The recently introduced Block Hooks API exposes a filter (`hooked_block_types`) which is given a `$context` argument, among others. If the filter is called on a block that's part of a template or template part, `$context` is set to the corresponding `WP_Block_Template` object.
However, that object's `$content` property is currently ''not'' exposed to the filter. This changeset amends that shortcoming.
This is useful for callbacks that might want to detect the presence of a serialized block instance (or potentially in the future utilize the HTML API) to restrict where the block is injected (before the template is rendered).
Addressing this also achieves parity with the structure of `$context` when it represents a pattern (where pattern serialized content is present).
Props nerrad.
Fixes#59882.
Built from https://develop.svn.wordpress.org/trunk@57118
git-svn-id: http://core.svn.wordpress.org/trunk@56629 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The example code in the PHPDoc comment for the HTML Tag Processor class
previously showed calling `next_tag()` with an array containing a `class`
key, which should have been `class_name`. This patch fixes this by using
the appropriate `class_name` key.
Props dmsnell, gaambo, crstauf, atachibana, audrasjb, krupalpanchal.
Fixes#59891.
Built from https://develop.svn.wordpress.org/trunk@57116
git-svn-id: http://core.svn.wordpress.org/trunk@56627 1a063a9b-81f0-0310-95a4-ce76da25c4cd
There are a handful of elements which behave similarly and are generically container elements. These are the following elements:
ADDRESS, ARTICLE, ASIDE, BLOCKQUOTE, CENTER, DETAILS, DIALOG, DIR,
DL, DIV, FIELDSET, FIGCAPTION, FIGURE, FOOTER, HEADER, HGROUP, MAIN,
MENU, NAV, SEARCH, SECTION, SUMMARY
This patch adds support to the HTML Processor for handling these elements. They do not require any additional logic in the rest of the class, and carry no specific semantic rules for parsing beyond what is listed in their group in the IN BODY section of the HTML5 specification.
Props dmsnell.
Fixes#59914.
Built from https://develop.svn.wordpress.org/trunk@57115
git-svn-id: http://core.svn.wordpress.org/trunk@56626 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Most of the `tabindex` attributes across the admin were removed in [21311].
This commit updates the example for the `$other_attributes` parameter to use the `id` attribute instead.
Includes synchronizing documentation between `submit_button()` and `get_submit_button()`.
Follow-up to [15810], [16061], [21311], [27136], [31599].
Props benjaminknox, sabernhardt, fushar, SergeyBiryukov.
Fixes#59768.
Built from https://develop.svn.wordpress.org/trunk@57114
git-svn-id: http://core.svn.wordpress.org/trunk@56625 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the '@since 6.4.0' annotation in `_register_theme_block_patterns` to reference `WP_Theme::get_block_patterns` instead of `_wp_get_block_patterns`, which was changed in [56978].
Props audrasjb, mukesh27, joemcgill.
Fixes#59869.
Built from https://develop.svn.wordpress.org/trunk@57102
git-svn-id: http://core.svn.wordpress.org/trunk@56613 1a063a9b-81f0-0310-95a4-ce76da25c4cd
During a bulk edit of posts with different categories, the categories for the edited posts would be reset to the default category: uncategorized by default.
This reverts [56712] to resolve the issue.
Props peterwilsoncc, hellofromtonya, jorbin.
Fixes#59837.
See #11302.
Built from https://develop.svn.wordpress.org/trunk@57093
git-svn-id: http://core.svn.wordpress.org/trunk@56604 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Partial revert of [56475] to reinstate the private `wpdb::$use_mysqli` property and set to its default to `true`. This private property was / is accessible through the magic methods. Though Core's usage of this property was removed by [56475], plugins are using the property. Reinstating it resolves the BC break.
Follow up to [56475].
Props jason_the_adams, joemcgill, johnbillion, johnjamesjacoby, jrf, rajinsharwar, renehermi.
Fixes#59846.
Built from https://develop.svn.wordpress.org/trunk@57089
git-svn-id: http://core.svn.wordpress.org/trunk@56600 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This updates the Requests library from version `2.0.8` to `2.0.9`. This is a hotfix release.
Props jorbin, hellofromTonya, desrosj, barry, cenkdemir, nexflaszlo, schlessera, jrf, Clorith, tomsommer, azaozz, pbiron, afragen, howdy_mcgee.
Fixes#59842.
Built from https://develop.svn.wordpress.org/trunk@57086
git-svn-id: http://core.svn.wordpress.org/trunk@56597 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This corrects the order the arguments are passed to the `contains()` function in the Performance Testing workflow.
Because the arguments were passed incorrectly, the expression was not evaluating correctly.
Follow up to [56972].
Props hellofromTonya.
See #59805.
Built from https://develop.svn.wordpress.org/trunk@57085
git-svn-id: http://core.svn.wordpress.org/trunk@56596 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add a new global attribute (i.e. an attribute that can be added to all and any blocks) called `metadata`. This is required for use cases such as allowing the user to assign custom names to blocks, or for making Block Hooks work with user-modified templates/parts/patterns (#59646).
Props Mamaduka, gziolo, get_dave.
Fixes#59797.
Built from https://develop.svn.wordpress.org/trunk@57068
git-svn-id: http://core.svn.wordpress.org/trunk@56579 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Documents the 4 new 6.4 Block Hooks global functions as private and for Core-only internal usage:
* `make_before_block_visitor()`
* `make_after_block_visitor()`
* `traverse_and_serialize_block()`
* `traverse_and_serialize_blocks()`
This is being done as the architectural design of these new functions may change in the next cycle. Further denoting them as private / Core only can help to avoid extender churn if any of these functions are deprecated.
Follow up to [56649], [56620].
Props azaozz, hellofromTonya, bernhard-reiter, gziolo, mikeschroder.
Fixes#59783.
See #59313.
Built from https://develop.svn.wordpress.org/trunk@57066
git-svn-id: http://core.svn.wordpress.org/trunk@56577 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This update includes the following fixes reported after RC3:
* Regression: [https://github.com/WordPress/gutenberg/pull/55858 Fixes patterns not working anymore as a post template for custom post types].
Scenario: When creating a new post for any custom post type registered with its "template" argument set to a pattern.
For this scenario, the pattern template no longer renders in the post editor or the frontend with 6.4, whereas it did render properly in 6.3.2.
This package update resolves the console error raised:
{{{
Uncaught TypeError: select(...).getCurrentTheme() is undefined
}}}
which restores the rendering of the pattern template.
* Regression: [https://github.com/WordPress/gutenberg/pull/55859 Fixes positioning and styles for the new lightbox's trigger] introduced in 6.4.
Follow up to [57048], [57034], [56987], [56961], [56849], [56818], [56816].
Props renathoc, rajinsharwar, richtabor, joen, mikachan, hellofromTonya.
Fixes#59411.
Built from https://develop.svn.wordpress.org/trunk@57063
git-svn-id: http://core.svn.wordpress.org/trunk@56574 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It is perfectly possible to write a commented regex with layout for readability by using the `x` modifier.
As per the manual:
> x (`PCRE_EXTENDED`)
>
> If this modifier is set, whitespace data characters in the pattern are totally ignored except when escaped or inside a character class, and characters between an unescaped # outside a character class and the next newline character, inclusive, are also ignored. This is equivalent to Perl's /x modifier, and makes it possible to include commentary inside complicated patterns.
>
> Note, however, that this applies only to data characters. Whitespace characters may never appear within special character sequences in a pattern, for example within the sequence (?( which introduces a conditional subpattern.
Reference: [https://www.php.net/manual/en/reference.pcre.pattern.modifiers.php PHP Manual: Pattern Modifiers].
This commit rewrites these two regexes to use the `x` modifier and gets rid of the unnecessary `phpcs:disable` comments.
The tests in the `tests/phpunit/tests/db/dbDelta.php` file cover this change.
Follow-up to [42249].
Props jrf.
See #59650.
Built from https://develop.svn.wordpress.org/trunk@57061
git-svn-id: http://core.svn.wordpress.org/trunk@56572 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It is perfectly possible to write a commented regex with layout for readability by using the `x` modifier.
As per the manual:
> x (`PCRE_EXTENDED`)
>
> If this modifier is set, whitespace data characters in the pattern are totally ignored except when escaped or inside a character class, and characters between an unescaped # outside a character class and the next newline character, inclusive, are also ignored. This is equivalent to Perl's /x modifier, and makes it possible to include commentary inside complicated patterns.
>
> Note, however, that this applies only to data characters. Whitespace characters may never appear within special character sequences in a pattern, for example within the sequence (?( which introduces a conditional subpattern.
Reference: [https://www.php.net/manual/en/reference.pcre.pattern.modifiers.php PHP Manual: Pattern Modifiers].
This commit rewrites these two regexes to use the `x` modifier and gets rid of the unnecessary `phpcs:disable` comments.
The tests in the `tests/phpunit/tests/db/dbDelta.php` file cover this change.
Follow-up to [42249].
Props jrf.
See #59650.
Built from https://develop.svn.wordpress.org/trunk@57056
git-svn-id: http://core.svn.wordpress.org/trunk@56567 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This increases the number of times to retry restarting a workflow from 10 to 15, and the `timeout-minutes` value to `30`.
For workflows with complex strategy matrix, the exponential backoff of 10 retries is still not enough to account for the GitHub Actions UI taking a long time to catch up.
Follow up to [56829] and [56830].
See #58867.
Built from https://develop.svn.wordpress.org/trunk@57052
git-svn-id: http://core.svn.wordpress.org/trunk@56563 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The callbacks returned by `make_before_block_visitor` and `make_after_block_visitor`, respectively, (which are passed as arguments to `traverse_and_serialize_block(s)`) currently accept three arguments, all of which are block arrays (i.e. with properties `blockName`, `attrs`, etc.):
- A ''reference'' to the block they're currently visiting, `&$block`;
- the block's `$parent_block`; and
- the `$prev`ious block (for `make_before_block_visitor`), or the `$next` block (for `make_after_block_visitor`), respectively.
Those arguments are passed to the "block visitor" callbacks by `traverse_and_serialize_block(s)` during traversal. The block that the callback is currently visiting is passed ''by reference'' to allow modifying it, which is e.g. used to inject the `theme` attribute into Template Part blocks.
One major limitation of Block Hooks is that they currently only work with templates, parts, and patterns that ''don't have any user modifications'' (i.e. that come straight from the corresponding theme files, rather than from the database). For WordPress 6.5, it is planned to change that to make Block Hooks work for templates, parts, and patterns that ''do'' have user modifications: #59646.
This will be implemented by storing an attribute on the "anchor" block. While working on that feature, it was found that the aforementioned callbacks will need to modify not only the currently visited `$block`, but also the `$parent_block` -- i.e. that the latter argument needs to be passed by reference as well. This is consistent with the requirement of adding an attribute to an anchor block, as it's not only the currently visited block that can serve as an anchor block (in the case of `before` or `after` sibling insertion), but also its parent (for `first_child` and `last_child` insertion).
If the `$parent_block` argument were to be changed to become a reference in a later WordPress version, this could be considered a backwards-compatibility breaking change. For this reason, this change is instead proposed for 6.4 already, which is the cycle during which the relevant functions were first introduced. This should have no impact on existing code, since nothing currently relies on `$parent_block` remaining unmodified by the respective callback, nor is anything currently modifying that argument.
Props hellofromTonya.
Fixes#59776.
Built from https://develop.svn.wordpress.org/trunk@57038
git-svn-id: http://core.svn.wordpress.org/trunk@56549 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This update includes the following bugfixes:
- Fix: Added a new block pattern for the home template that inherits the page query and fits the design of the home page. (more context on the theme repo: https://github.com/WordPress/twentytwentyfour/pull/706)
- Fix: Rely on parent theme data for block style.
- Fix: Categories for some patterns.
- Fix: Minor labeling issues
Follow-up to [56999], [56951], [56813], [56764], [56716].
Props anlino, beafialho, desrosj, devmuhib, didierjm, fabiorubioglio, flixos90, hanneslsm, hellofromTonya, huzaifaalmesbah, ktaron, luminuu, mshowes, onemaggie, phillsav, poena, rajinsharwar, richtabor, shailu25.
Fixes#59770, #59759.
Built from https://develop.svn.wordpress.org/trunk@57036
git-svn-id: http://core.svn.wordpress.org/trunk@56547 1a063a9b-81f0-0310-95a4-ce76da25c4cd
A collection of fixes for `wp_prime_option_caches()`:
* cache arrays and objects in their serialized form for consistency with `get_option()` and `wp_load_alloptions()`
* prevent repeat database queries for falsey and known non-existent options (notoptions)
Additional tests for `wp_prime_option_caches()` to ensure:
* additional database queries are not made repriming options (known, known-unknown and alloptions)
* cache is primed consistently
* `get_option()` returns a consistent value regardless of how it is primed
* database queries do not contain earlier primed options
* `get_option` does not prime the cache when testing the cache has been successfully primed
Fixes a test for `wp_prime_option_caches_by_group()` to ensure `get_option` does not prime the cache when testing the cache has been successfully primed.
Follow up to [56445],[56990],[57013].
Props peterwilsoncc, costdev, flixos90, hellofromTonya, mikeschroder, joemcgill.
Fixes#59738. See #58962.
Built from https://develop.svn.wordpress.org/trunk@57029
git-svn-id: http://core.svn.wordpress.org/trunk@56540 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When setting an RTL language under Settings → General, some RTL stylesheets were not loaded, with LTR stylesheets being loaded instead, meaning that some blocks were not displayed correctly.
This commit ensures that all appropriate RTL stylesheets are loaded when selecting an RTL language.
Follow-up to [56524].
Props mukesh27, maahrokh, hellofromTonya, joemcgill, huzaifaalmesbah, rajinsharwar, devmuhib, swissspidy.
Fixes#59715.
Built from https://develop.svn.wordpress.org/trunk@57028
git-svn-id: http://core.svn.wordpress.org/trunk@56539 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This makes it possible to register a block by passing an array of arguments, without the presence of a `block.json` file.
Follow-up to [48141], [49948].
Props aristath, spacedmonkey, mukesh27, costdev, audrasjb, oglekler, felipeelia, hellofromTonya.
Fixes#56865.
Built from https://develop.svn.wordpress.org/trunk@57026
git-svn-id: http://core.svn.wordpress.org/trunk@56537 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add a conditional to prevent the `prefers-reduced-motion` `ajaxComplete` listener from observing events not occurring in the plugin installation screen. Improve handling of settings data test.
The listener observing `ajaxComplete` in [56541] was intercepting all `ajaxComplete` events, creating potential for unexpected errors in unrelated functions.
Props bplv, afercia, rudlinkon, hellofromTonya, huzaifaalmesbah, joedolson, jorbin.
Fixes#59689.
Built from https://develop.svn.wordpress.org/trunk@57022
git-svn-id: http://core.svn.wordpress.org/trunk@56533 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes a bug during the database upgrade process where a theme's `functions.php` file may not be loaded, leading to potential exceptions if the theme's pattern files use symbols (classes, functions, constants, etc.) that are declared only when the `functions.php` file is loaded. To do so, a check for `wp_get_active_and_valid_themes()` is added early to `_register_theme_block_patterns()`, which returns early if no active or valid themes are returned.
Props fabiankaegy, rajinsharwar, pbiron, huzaifaalmesbah, hellofromTonya, peterwilsoncc, joemcgill.
Fixes#59723.
Built from https://develop.svn.wordpress.org/trunk@57021
git-svn-id: http://core.svn.wordpress.org/trunk@56532 1a063a9b-81f0-0310-95a4-ce76da25c4cd
As a follow up to [56507], this fixes a bug that could occur for instance when plugins hijack the block template detection process to inject their own block template with entirely custom logic.
Props afragen, hellofromTonya, costdev, mukesh27, huzaifaalmesbah, flixos90.
Fixes#59736.
See #58154.
Built from https://develop.svn.wordpress.org/trunk@57019
git-svn-id: http://core.svn.wordpress.org/trunk@56530 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Tweaks the 6.4 about pages in a couple of ways:
- Decouples the background from the 6.4 logo so the logo can move for RTL.
- Updates a color to improve color contrast.
- Help prevent overlap of long text strings with 6.4 logo.
- Ensure background isn't dark when no background is used on mobile.
Props nudge, jorbin, afercia, sumitsingh, sabernhardt.
See #59289, #59664.
Built from https://develop.svn.wordpress.org/trunk@57018
git-svn-id: http://core.svn.wordpress.org/trunk@56529 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The affected lines already have ignore annotations in the `wp-includes/class-wp-block-parser-block.php` file itself.
Follow-up to [56048], [56738], [56743], [56751], [56752], [56753].
Props jrf, SergeyBiryukov.
See #59161.
Built from https://develop.svn.wordpress.org/trunk@57017
git-svn-id: http://core.svn.wordpress.org/trunk@56528 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Rename the option cache priming functions to more closely follow the naming convention used by other cache priming functions.
* `wp_load_options()` becomes `wp_prime_option_caches()`
* `wp_load_options_by_group()` becomes `wp_prime_option_caches_by_group()`
The unit test files and classes are renamed accordingly.
Unlike the existing cache priming functions, these functions were introduced with the intention of being public so use the `wp_` prefix rather than the `_` prefix used by the functions initially introduced as private functions but since made public.
Follow up to [56445],[56990].
Props flixos90, peterwilsoncc, joemcgill, SergeyBiryukov, desrosj.
Fixes#58962.
Built from https://develop.svn.wordpress.org/trunk@57013
git-svn-id: http://core.svn.wordpress.org/trunk@56524 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[56834] adjusted the order of activity inside the rest server responses. This lead to the `rest_pre_serve_request` filter potentially blocking the sending of the no cache headers. This moves that action back to being after the sending of no cache headers has finished to restore the pre 6.3.2 order of these two actions.
Props perrelet, SergeyBiryukov, peterwilsoncc.
Fixes#59722.
Built from https://develop.svn.wordpress.org/trunk@57012
git-svn-id: http://core.svn.wordpress.org/trunk@56523 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The Customizer live preview broke because of [56635], however the root cause for the bug was a lower-level problem that had been present since WordPress 5.8: The block theme specific functions `_add_default_theme_supports()` and `wp_enable_block_templates()` were being hooked into the `setup_theme` action, which fires too early to initialize theme features. Because of that, theme functionality would be initialized before the current theme setup being completed. In the case of the Customizer, that includes overriding which theme is the current theme entirely, thus leading to an inconsistent experience.
This changeset fixes the bug by moving those two callbacks to the `after_setup_theme` action, which is the appropriate action to initialize theme features.
Props karl94, hellofromTonya, joemcgill, flixos90.
Fixes#59732.
See #18298, #53397, #54597.
Built from https://develop.svn.wordpress.org/trunk@57009
git-svn-id: http://core.svn.wordpress.org/trunk@56520 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This update includes updates to patterns to correct color issues and some code quality fixes.
Follow-up to [56951], [56813], [56764], [56716].
Props luminuu, richtabor, onemaggie, kafleg, swissspidy, huzaifaalmesbah, neilorangepeel, shailu25, lada7042, mukesh27, nilovelez, jorbin.
Fixes#59711.
Built from https://develop.svn.wordpress.org/trunk@56999
git-svn-id: http://core.svn.wordpress.org/trunk@56510 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The method attempted to check if there is already a file with the same name, however the conditional used an undefined variable.
This commit prevents directory creation if a file or directory with the same name already exists, bringing consistency with the PHP `mkdir()` implementation.
Includes adding missing documentation for the method.
Reference: [https://www.php.net/manual/en/streamwrapper.mkdir.php PHP Manual: streamWrapper::mkdir()].
Follow-up to [49230].
Props david.binda, sadizaman, rajinsharwar, SergeyBiryukov.
Fixes#59406.
Built from https://develop.svn.wordpress.org/trunk@56998
git-svn-id: http://core.svn.wordpress.org/trunk@56509 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Fixes static property handling for `WP_Duotone::$block_css_declarations` in the `Tests_Block_Supports_Duotone::test_css_declarations_are_generated_even_with_empty_block_content()`:
* Fixes `ReflectionProperty::setValue()` to use an instance of `WP_Duotone`.
* Adds an inline comment to explain why a static class (i.e. a class that is not intended to be an object by design as it only contains static properties and methods) needs an instance, i.e. needed for PHP 8.3 and higher.
* Resets the static property's value to its original value, i.e. before the test started.
Follow-up to [56991].
Props costdev.
See #59694.
Built from https://develop.svn.wordpress.org/trunk@56996
git-svn-id: http://core.svn.wordpress.org/trunk@56507 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Make layout support compatible with enhanced pagination by ensuring that generated class names are stable across pagination, even when the number of rendered posts is different.
With the previous implementation of enhanced pagination, the CSS corresponding to each block was not detected. Therefore, for enhanced pagination to work correctly, the CSS of the blocks present in the Post Template must be stable on all pages.
The number of posts rendered by the Query block is always the same, except in the last page, where it can be only a fraction. If any of the blocks rendered by the Post Template used the `wp_unique_id` function, the ID (which is incremental) would have been different than in the previous pages and the class names would have varied.
This is remediated by this changeset by replacing the usage of `wp_unique_id` in the layout support (which is used by the Query block) with an implementation that uses IDs that are incremental only for that block. That way, the generated class names are never affected by the number of times `wp_unique_id` runs.
Props luisherranz, andrewserong, isabel_brison, costdev, mukesh27, cbravobernal, hellofromTonya, jorbin.
Fixes#59681.
Built from https://develop.svn.wordpress.org/trunk@56994
git-svn-id: http://core.svn.wordpress.org/trunk@56505 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Some blocks do not have content. For duotone support, blocks without content still need to run through the `render_duotone_support()` to render their duotone CSS.
This fix makes the duotone compatible with the enhanced pagination (introduced in 6.4.0) by making sure that the CSS is always on the page, even when the posts have no featured image. It also prevents the duotone from interfering with other blocks using `wp_unique_id()`.
References:
* [https://github.com/WordPress/gutenberg/pull/55415 Gutenberg PR 55415]
Follow-up to [56226].
Props cbravobernal, luisherranz, hellofromTonya, isabel_brison, jorbin.
Fixes#59694.
Built from https://develop.svn.wordpress.org/trunk@56991
git-svn-id: http://core.svn.wordpress.org/trunk@56502 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This clearly separates these functions which are intended to be used by external developers from the existing `_prime_*_caches()` functions which are primarily intended for internal usage. The term "load" is additionally more accessible than "prime".
This changeset renames the above function, as well as the wrapper function `prime_options_by_group()` to `wp_load_options_by_group()`.
Props peterwilsoncc, joemcgill, hellofromTonya, poran766, flixos90.
Fixes#58962.
Built from https://develop.svn.wordpress.org/trunk@56990
git-svn-id: http://core.svn.wordpress.org/trunk@56501 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When the XML sitemaps feature was originally introduced, the `lastmod` field was omitted because guidance at the time indicated it was less important for search engines, plus for some entities it was computationally expensive to add. Now that the guidance has slightly changed, we are revisiting this and adding `lastmod` where easily possible.
- Adds `lastmod` to all individual post objects (of any post type) in the sitemap
- Adds `lastmod` to the homepage sitemap entry if the homepage is set to display the latest posts.
No `lastmod` is added for the individual sitemap pages in the sitemap index, nor for term archives or user archives. Those enhancements require additional changes, such as storing the modified date for a taxonomy term when something is added to that term. They can be revisited in separate follow-up tickets.
Props swissspidy, joemcgill.
Fixes#52099
Built from https://develop.svn.wordpress.org/trunk@56985
git-svn-id: http://core.svn.wordpress.org/trunk@56496 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [56765], theme block pattern files were cached to a transient as a performance enhancement. However, transients are not easily clearable when caches are flushed on environments not using a persistent cache, which can lead to errors if the theme files are renamed, edited, or moved.
This changes the caching mechanism to use `wp_cache_set()` instead, and caches these values to the global group so they are still persistent on environments using an object cache, and will be cleared by a cache flush.
In addition, the helper `_wp_get_block_patterns` has been moved `WP_Theme::get_block_patterns` for consistency with other block related theme methods and cache helpers for these values, `WP_Theme::get_pattern_cache` and `WP_Theme::set_pattern_cache`, have been made private.
Relevant unit tests updated.
Props: afercia, flixos90, mukesh27, joemcgill.
Fixes#59633. See #59591, #59490.
Built from https://develop.svn.wordpress.org/trunk@56978
git-svn-id: http://core.svn.wordpress.org/trunk@56489 1a063a9b-81f0-0310-95a4-ce76da25c4cd
A very common contributor setup is having a copy of the `gutenberg` development repository within a checkout of the `wordpress-develop` repository. On occasion, there are some strange incompatibilities that come up when using this setup. A few examples can be seen in #58671 and #59634.
This changeset helps ensure that these edge cases are not introduced by testing the Gutenberg plugin’s build process within WordPress configured to run from both the `src` and `build` directories.
This also renames the “Test npm” workflow to a more general “Test Build Processes”, which more accurately describes what is actually being tested within it and allows these new test jobs to be grouped in.
And finally, the logic within the workflow has been split out into two callable workflows. This helps avoid code duplication within the workflow, and allows for better grouping on the workflow run screen.
Props swissspidy, aferica, SergeyBiryukov, antonvlasenko, desrosj.
Fixes#59632. See #58671, #59634.
Built from https://develop.svn.wordpress.org/trunk@56976
git-svn-id: http://core.svn.wordpress.org/trunk@56487 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The globals introduced in [56635] to cache the current theme directories in memory were not considering switching sites in a multisite network. This changeset addresses the bug including test coverage.
Props codex-m, jeremyfelt.
Fixes#59677.
See #18298.
Built from https://develop.svn.wordpress.org/trunk@56974
git-svn-id: http://core.svn.wordpress.org/trunk@56485 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When a branch is created, there is no previous commit to reference in the `github.event.before` context, which causes the performance workflow to fail because there is no previous commit to perform a comparison with.
This adds a condition to check that `github.event.before` is not set to `0000000000000000000000000000000000000000`, which is the default value when there are no previous commits.
Props swissspidy.
See #588867.
Built from https://develop.svn.wordpress.org/trunk@56972
git-svn-id: http://core.svn.wordpress.org/trunk@56483 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Includes removing `.php` from some older group names, because most of the groups are no longer named based on the file containing the function, and sometimes functions move around, making the file-based group name inaccurate.
Props afercia, aristath, poena, SergeyBiryukov.
See #59647.
Built from https://develop.svn.wordpress.org/trunk@56971
git-svn-id: http://core.svn.wordpress.org/trunk@56482 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Both the `$pre_callback` and `$post_callback` functions that are given as arguments to `traverse_and_serialize_block(s)` receive a reference to the current block as their first argument. However, while any changes that the "pre" callback makes to the block are reflected by the serialized markup, the same wasn't true for the "post" callback: Any changes that it made were only applied ''after'' the block had already been serialized.
This commit changes the behavior such that `$post_callback`'s changes to the current block are also reflected in the serialized markup.
See #59646.
Props gziolo.
Fixes#59669.
Built from https://develop.svn.wordpress.org/trunk@56970
git-svn-id: http://core.svn.wordpress.org/trunk@56481 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Each of these functions already has a separate test for availability.
If any of them are unavailable, then the test should fail rather than be skipped.
Follow-up to [52038], [52039], [52040].
Props johnbillion.
See #59647.
Built from https://develop.svn.wordpress.org/trunk@56969
git-svn-id: http://core.svn.wordpress.org/trunk@56480 1a063a9b-81f0-0310-95a4-ce76da25c4cd
After [56966], CI jobs that check the `package-lock.json` failed on the "Ensure version-controlled files are not modified or deleted" task.
There are 2 version fields that need to be updated for the new WP version. This changeset updates the "packages" > "version" for 6.5.0.
Follow-up to [56966].
Props swissspidy, benharri.
Unprops hellofromTonya.
Fixes#59665.
Built from https://develop.svn.wordpress.org/trunk@56968
git-svn-id: http://core.svn.wordpress.org/trunk@56479 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It was found that Template Part blocks were broken in the Site Editor, showing the `Template part has been deleted or is unavailable` message, due to a missing `theme` attribute.
This bug seems to have been introduced by [56896], whose goal was to only inject that attribute into the markup returned by the templates and patterns REST API endpoints but not on the frontend, in order to improve performance. It has been demonstrated locally that reverting that changeset fixes the bug.
Reverts [56896].
Props mmcalister, swisspidy, thelovelist, hellofromTonya, pbiron, Pauthake015, richtabor, nicolefurlan, huzaifaalmesbah, annezazu, kafleg, aegkr, sunitarai, shresthaaman, andraganescu, onemaggie, gziolo.
Fixes#59629.
Built from https://develop.svn.wordpress.org/trunk@56960
git-svn-id: http://core.svn.wordpress.org/trunk@56471 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Reverts [56451] to avoid the following issues:
* missing the default `font-size` for anyone who does not use the size control.
* unintentional reduction in citation's `line-height` down to the `--pullquote--line-height` value (1.3 instead of 1.6).
With 6.4 RC1 happening shortly, this revert is necessary to avoid shipping this issues in the release, while giving the time needed to resolve in the next cycle.
Follow-up to [56451].
Props sabernhardt, nicolefurlan.
See #57854.
Built from https://develop.svn.wordpress.org/trunk@56959
git-svn-id: http://core.svn.wordpress.org/trunk@56470 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds a global environment variable to the Test old branches workflow to make the supported version more clear and easier to update in the future. This will also make it easier to reference in more places as this workflow grows.
See #58867.
Built from https://develop.svn.wordpress.org/trunk@56955
git-svn-id: http://core.svn.wordpress.org/trunk@56466 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `PUPPETEER_SKIP_DOWNLOAD` environment variable is used to prevent Puppeteer from automatically downloading browser binaries.
It was removed in [56926] due to the migration to Playwright. However, because of the QUnit tests, Puppeteer is actually still a dependency.
Until those tests change, we have to keep this environment variable to prevent unnecessary downloads on CI.
Props SergeyBiryukov.
Fixes#59517.
Built from https://develop.svn.wordpress.org/trunk@56954
git-svn-id: http://core.svn.wordpress.org/trunk@56465 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When applying updates to HTML, one step was left out in [56941] which updated the position of the end of the current tag. This made it possible to create bookmarks with null or earlier end positions than their start position. This in turn broke the Directive Processor in Gutenberg during the backport of changes from Core into Gutenberg.
In this commit, after applying updates, the HTML document is now scanned fully to the end of the current tag, updating the internal pointer to its end, so that nothing else will be broken or misaligned.
Follow-up to [56941].
Props dmsnell.
Fixes#59643.
Built from https://develop.svn.wordpress.org/trunk@56953
git-svn-id: http://core.svn.wordpress.org/trunk@56464 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The required version was previously set to two different values:
* 4.7 in the theme's `functions.php` file.
* 4.9.6 in theme headers, because of the `the_privacy_policy_link()` function usage in `footer.php`.
However, as `the_privacy_policy_link()` call is wrapped in a `function_exists()` check, it does not affect the requirements in practice.
This commit aims to correct the discrepancy by updating theme headers to match the actual required WP version.
Follow-up to [43808], [43892].
Props poena, kafleg, felipeelia, audrasjb, huzaifaalmesbah, shailu25, nicolefurlan, oglekler.
Fixes#59557.
Built from https://develop.svn.wordpress.org/trunk@56952
git-svn-id: http://core.svn.wordpress.org/trunk@56463 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Resyncing changes for TT4 into Core.
Changes include:
* Reformatted all the patterns for readability.
* Bugfixes in the markup and improvements on the string translation functions.
* Renaming of some patterns, making them consistent with the content they show and whether they are simple patterns, full-page patterns or patterns meant to replace templates.
Follow-up to [56813], [56764], [56716].
Props richtabor, onemaggie, luminuu, shailu25, dunhakdis, shivashankerbhatta, dajeema, enodekciw, kafleg, viralsampat, glendaviesnz, beafialho, webmandesign, huzaifaalmesbah, gregfuller, benharri.
Fixes#59640.
Built from https://develop.svn.wordpress.org/trunk@56951
git-svn-id: http://core.svn.wordpress.org/trunk@56462 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Also includes updates to the contribute, credits, freedom and privacy pages.
Props luminuu, rmartinezduque, estelaris, jorbin, mukesh27, cbringmann, richtabor, annezazu, nudge, ohia, acirujano, elmastudio, cathibosco1, sereedmedia, markoserb, joen. (Also someone named Allison who I am going to guess is Taylor Alison Swift but has no avatar so I will never know)
Built from https://develop.svn.wordpress.org/trunk@56950
git-svn-id: http://core.svn.wordpress.org/trunk@56461 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevent the saving of invalid timezone string in to the database on the options pages. If an invalid timezone is submitted it is ignored and the setting remains unchanged.
This prevents a warning or fatal (depending on the PHP version) from being thrown by an invalid timezone setting on the Settings > General page.
Props ankit-k-gupta, costdev, huzaifaalmesbah, mrinal013, nicolefurlan, oglekler.
Fixes#58814.
Built from https://develop.svn.wordpress.org/trunk@56949
git-svn-id: http://core.svn.wordpress.org/trunk@56460 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This reverts changes from [56648], [56681], [56717], [56762], [56788], [56797], and [56814] to restore the behavior for `update_option()` and `update_network_option()` to their prior state as of 6.3.X due to the discovery of various backwards compatibility issues found late in the 6.4 release cycle.
Props mukesh27, costdev, flixos90, spacedmonkey, snicco, jrf, joemcgill.
See #22192, #59360.
Built from https://develop.svn.wordpress.org/trunk@56946
git-svn-id: http://core.svn.wordpress.org/trunk@56457 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The npm packages needed a second part to the update for 6.4 RC1.
Props isabel_brison, andrewserong, jsnajdr, wildworks, joen, mciampini, tyxla, youknowriad, ramonopoly, spacedmonkey, dmsnell, mikachan, kishanjasani, czapla, siobhyb, darerodz, luisherranz
See #59411.
Built from https://develop.svn.wordpress.org/trunk@56945
git-svn-id: http://core.svn.wordpress.org/trunk@56456 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`grunt-contrib-qunit` was upgraded from version `7.0.1` to `8.0.1` in [56647]. However, this update causes a strange failure when running the build script for the Gutenberg plugin when checked out within a `wordpress-develop` checkout.
This reverts the related change in [56647] and downgrades the dependency back to `7.0.1` until the exact reason for the failure is narrowed down.
Props afercia, kevin940726, antonvlasenko, desrosj.
See #59634, #58863.
Built from https://develop.svn.wordpress.org/trunk@56944
git-svn-id: http://core.svn.wordpress.org/trunk@56455 1a063a9b-81f0-0310-95a4-ce76da25c4cd
After modifying tags in the HTML API, the Tag Processor backs up to before the tag being modified and then re-parses its attributes. This saves on the code complexity involved in applying updates, which have already been transformed to “lexical updates” by the time they are applied.
In order to do that, `::get_updated_html()` called `::next_tag()` to reuse its logic. However, as a public method, subclasses may change the behavior of that method, and the HTML Processor does just this. It maintains an HTML stack of open elements and when the Tag Processor calls this method to re-scan a tag and its attributes, it leads to a broken stack.
This commit replaces the call to `::next_tag()` with a more appropriate reapplication of its internal parsing logic to rescan the tag name and its attributes. Given the limited nature of what's occurring in `::get_updated_html()`, this should bring with it certain guarantees that no HTML structure is being changed (that structure will only be changed by subclasses like the HTML Processor).
Follow-up to [56274], [56702].
Props dmsnell, zieladam, nicolefurlan.
Fixes#59607.
Built from https://develop.svn.wordpress.org/trunk@56941
git-svn-id: http://core.svn.wordpress.org/trunk@56452 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Within the details block, style the `summary` element using the default display, `list-item`, this ensures the toggle icon appears indicating the summary can be expanded or contracted.
Props ankit-k-gupta, nicolefurlan, poena, sabernhardt.
Fixes#58915.
Built from https://develop.svn.wordpress.org/trunk@56940
git-svn-id: http://core.svn.wordpress.org/trunk@56451 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, a trailing slash was appended to the link returned from `get_pagenum_link()`. If the permalink structure didn't contain a trailing slash, this link could fail.
This change removes trailing slashes and only appends one if the site is set for adding trailing slashes.
This adds a new test file for the accompanying tests, `tests/phpunit/tests/link/getPagenumLink.php`, and moves an existing test for `get_pagenum_link()` to the same file.
Props davemad-davenet, darkfate, Nazgul, scribu, nacin, obenland, chriscct7, jesin, matthewppelsheimer, audrasjb, petitphp, mukesh27, oglekler, mai21, webtechpooja, tejwanihemant, nicolefurlan, hellofromTonya, costdev.
Fixes#2877.
Built from https://develop.svn.wordpress.org/trunk@56939
git-svn-id: http://core.svn.wordpress.org/trunk@56450 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Core uses 3 known, named, dynamic properties on the `WP_Text_Diff_Renderer_Table` class:
* `_title`
* `_title_left`
* `_title_right`
When reviewing revisions (within the admin UI), `wp_text_diff()` passes the arguments (without the leading `_`) to a new instance, which raised deprecation notices (see [56354]).
Note: the parent class adds the leading `_` to each of these properties (see [7747]).
The deprecation notices are resolved by declaring each of these known, named, dynamic properties on the class, per the #56034 mitigation strategy. These new properties are not initialized to retain their previous `null` behavior.
Follow-up to [56354], [23506], [7747].
Props wildworks, antonvlasenko, hellofromTonya, ironprogrammer, kafleg, mukesh27, nicolefurlan, presskopp, sabernhardt.
Fixes#59431.
See #58898, #56034.
Built from https://develop.svn.wordpress.org/trunk@56938
git-svn-id: http://core.svn.wordpress.org/trunk@56449 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When an admin sends a password reset link to a user (from the Users UI screen), the "finished" UI message:
>Password reset link sent.
is displayed on "finished" and no longer displayed on error.
**What is the change?**
Previously, the conditional (for incrementing the reset counter) checked for a truthy return from `retrieve_password()`. But `retrieve_password()` always returns a truthy state: `true` (meaning "finished") or an instance of `WP_Error`. Thus, checking for a truthy meant the "finished" message was sent on both "finished" and error/failed.
This fix checks for `retrieve_password()` returning `true` to indicate "finished".
**What is displayed on error?**
If `retrieve_password()` returns an instance of `WP_Error`, the following UI message is shown:
>Password reset links sent to 0 users.
The UI messages were not modified by this changeset.
Follow-up to [50129].
Props letraceursnork, prashantbhivsane, audrasjb, costdev, dilipbheda, hareesh-pillai, hellofromTonya, ironprogrammer, huzaifaalmesbah, marybaum, nicolefurlan, oglekler, petitphp, SergeyBiryukov.
Fixes#58407.
Built from https://develop.svn.wordpress.org/trunk@56937
git-svn-id: http://core.svn.wordpress.org/trunk@56448 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Instead of displaying the color names, two of the default colors displayed the color code, which was only intended to show when the user has enabled the custom color option in the Customizer.
The reason is that the default value for the option is `false`, and this value is changed to the string `'custom'` if the color option is enabled, and the string `'default'` if the custom color is enabled and then reset to default colors.
This commit adjusts the logic for displaying the color name, to make sure that the string value `'default'` is not compared with `false`, by adding the default value as a parameter to `get_theme_mod( 'primary_color' )`.
Follow-up to [45964].
Props poena, mukesh27, ugyensupport, shailu25, anveshika, harshgajipara, nicolefurlan, syamraj24, balub, vivekawsm.
Fixes#59566.
Built from https://develop.svn.wordpress.org/trunk@56935
git-svn-id: http://core.svn.wordpress.org/trunk@56446 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This prevents a performance regression when a blocking script is enqueued in the footer which depends on a delayed script in the `head` (with `async` or `defer`). In order to preserve the execution order, a delayed dependency must fall back to blocking when there is a blocking dependent. But since it was originally delayed (and thus executes similarly to a footer script), it does not need to be in the head and can be moved to the footer. This prevents blocking the critical rendering path.
Props adamsilverstein, westonruter, flixos90.
Fixes#59599.
See #12009.
Built from https://develop.svn.wordpress.org/trunk@56933
git-svn-id: http://core.svn.wordpress.org/trunk@56444 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Introduce `wp_enqueue_block_template_skip_link()` to replace `the_block_template_skip_link()`. Add to `wp_enqueue_scripts` action instead of `wp_footer`.
* Keep inline script for skip link in footer.
* Restore original `the_block_template_skip_link()` from 6.3 and move to `deprecated.php`.
* Preserve back-compat for unhooking skip-link by removing `the_block_template_skip_link` from `wp_footer` action.
Follow-up to [56682] and [56687].
Props sabernhardt, plugindevs, westonruter, spacedmonkey.
Fixes#59505.
See #58775.
See #58664.
Built from https://develop.svn.wordpress.org/trunk@56932
git-svn-id: http://core.svn.wordpress.org/trunk@56443 1a063a9b-81f0-0310-95a4-ce76da25c4cd
costdev
Pascal Birchler
youknowriad
Sergey Biryukov
Joe McGill
spacedmonkey
audrasjb
Adam Silverstein
hellofromTonya
joedolson
Aaron Jorbin
davidbaumwald
Bernhard Reiter
gziolo
dmsnell
isabel_brison
desrosj
Peter Wilson
Andrea Fercia
jorgefilipecosta
Weston Ruter
Felix Arntz
Gary Pendergast
zieladam
John Blackbourn
Tammie Lister