ML mappings and index templates have so far been created
programmatically. While this had its merits due to static typing,
there is consensus it would be clear to maintain those in json files.
In addition, we are going to adding ILM policies to these indices
and the component for a plugin to register ILM policies is
`IndexTemplateRegistry`. It expects the templates to be in resource
json files.
For the above reasons this commit refactors ML mappings and index
templates into json resource files that are registered via
`MlIndexTemplateRegistry`.
Backport of #51765
Backport: #52139
In the rolling upgrade tests, watcher is manually executed,
in rare scenarios this happens before watcher is started,
resulting in the manual execution to fail.
Relates to #33185
set watcher logger to debug level.
These tests haven't run in such a long time,
we first need to get a better picture how/if
these tests fail today.
Backport of #51478
See #33185
In the yaml cluster upgrade tests, we start a scroll in a mixed-version cluster,
then attempt to continue the scroll after the upgrade is complete. This test
occasionally fails because the scroll can expire before the cluster is done
upgrading.
The current scroll keep-alive time 5m. This PR bumps it to 10m, which gives a
good buffer since in failing tests the time was only exceeded by ~30 seconds.
Addresses #46529.
The testclusters shutdown code was killing child processes
of the ES JVM before the ES JVM. This causes any running
ML jobs to be recorded as failed, as the ES JVM notices that
they have disconnected from it without being told to stop,
as they would if they crashed. In many test suites this
doesn't matter because the test cluster will never be
restarted, but in the case of upgrade tests it makes it
impossible to test what happens when an ML job is running
at the time of the upgrade.
This change reverses the order of killing the ES process
tree such that the parent processes are killed before their
children. A list of children is stored before killing the
parent so that they can subsequently be killed (if they
don't exit by themselves as a side effect of the parent
dying).
Backport of #50175
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
I think the problem is that the master is trying to relocate the "upgraded_scroll" shard back to
the node on which it was previously allocated, but to which it can't be allocated now due to the
shard lock being held because of an in-progress scroll. As the master keeps on retrying and
retrying (and indefinitely tries so because max_retries does not apply to relocations, it blocks
any other lower-prioritized task from completing, which leads to the rolling upgrade tests failing
(see #48395).
Closes#48395
rename internal indexes of transform plugin
- rename audit index and create an alias for accessing it, BWC: add an alias for old indexes to
keep them working, kibana UI will switch to use the read alias
- rename config index and provide BWC to read from old and new ones
This commit lifts the validation of the monitoring hosts setting into
the setting itself, rather than when the setting is used. This prevents
a scenario where an invalid value for the setting is accepted, but then
later fails while applying a cluster state with the invalid setting.
* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
When upgrading data nodes to a newer version before
master nodes there was a risk that a transform running
on an upgraded data node would index a document into
the new transforms internal index before its index
template was created. This would cause the index to
be created with entirely dynamic mappings.
This change introduces a check before indexing any
internal transforms document to ensure that the required
index template exists and create it if it doesn't.
Backport of #46553
rename data frame transform plugin to transform:
- rename plugin data-frame to transform
- change all package names from o.e.*.dataframe.* to o.e.*.transform.*
- necessary changes to fix loading/testing
* [ML][Transforms] fixing rolling upgrade continuous transform test (#45823)
* [ML][Transforms] fixing rolling upgrade continuous transform test
* adjusting wait assert logic
* adjusting wait conditions
* [ML][Transforms] allow executor to call start on started task (#46347)
* making sure we only upgrade from 7.4.0 in test
This check was introduced in #41392 but had the unwanted side-effect
that the keystore settings in such blocks would note be added in the
node's keystore. Given that we have a mid-term plan for FIPS testing
that would made such checks unnecessary, and that the conditional
in these two cases is not really that important, this change removes
this conditional logic so that full-cluster-restart and rolling
upgrade tests will run with PEM files for key/certificate material
no matter if we're in a FIPS JVM or not.
Resolves: #45475
This commit replaces task_state and indexer_state in the
data frame _stats output with a single top level state
that combines the two. It is defined as:
- failed if what's currently reported as task_state is failed
- stopped if there is no persistent task
- Otherwise what's currently reported as indexer_state
Backport of #45276
This change adjusts the data frame transforms stats
endpoint to return a structure that is easier to
understand.
This is a breaking change for clients of the data frame
transforms stats endpoint, but the feature is in beta so
stability is not guaranteed.
Backport of #44350
* [ML][Data Frame] Adding bwc tests for pivot transform (#43506)
* [ML][Data Frame] Adding bwc tests for pivot transform
* adding continuous transforms
* adding continuous dataframes to bwc
* adding continuous data frame tests
* Adding rolling upgrade tests for continuous df
* Fixing test
* Adjusting indices used in BWC, and handling NPE for seq_no_stats
* updating and muting specific bwc test
* Adjusting bwc tests for backport
This commit removes some trace logging for the token service in the
rolling upgrade tests. If there is an active investigation here, it
would be best to annotate this line with a comment in the source
indicating such. From my digging, it does not appear there is an active
investigation that relies on this logging, so we remove it.
This commit changes the way token ids are hashed so that the output is
url safe without requiring encoding. This follows the pattern that we
use for document ids that are autogenerated, see UUIDs and the
associated classes for additional details.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit introduces the `.security-tokens` and `.security-tokens-7`
alias-index pair. Because index snapshotting is at the index level granularity
(ie you cannot snapshot a subset of an index) snapshoting .`security` had
the undesirable effect of storing ephemeral security tokens. The changes
herein address this issue by moving tokens "seamlessly" (without user
intervention) to another index, so that a "Security Backup" (ie snapshot of
`.security`) would not be bloated by ephemeral data.
This commit removes xpack dependencies of many xpack qa modules.
(for some qa modules this will require some more work)
The reason behind this change is that qa rest modules should not depend
on the x-pack plugins, because the plugins are an implementation detail and
the tests should only know about the rest interface and qa cluster that is
being tested.
Also some qa modules rely on xpack plugins and hlrc (which is a valid
dependency for rest qa tests) creates a cyclic dependency and this is
something that we should avoid. Also Eclipse can't handle gradle cyclic
dependencies (see #41064).
* don't copy xpack-core's plugin property into the test resource of qa
modules. Otherwise installing security manager fails, because it tries
to find the XPackPlugin class.
* moved hlrc parsing tests from xpack to hlrc module and removed dependency on hlrc from xpack core
* deprecated old base test class
* added deprecated jdoc tag
* split test between xpack-core part and hlrc part
* added lang-mustache test dependency, this previously came in via
hlrc dependency.
* added hlrc dependency on a qa module
* duplicated ClusterPrivilegeName class in xpack-core, since x-pack
core no longer has a dependency on hlrc.
* replace ClusterPrivilegeName usages with string literals
* moved tests to dedicated to hlrc packages in order to remove Hlrc part from the name and make sure to use imports instead of full qualified class where possible
* remove ESTestCase. from method invocation and use method directly,
because these tests indirectly extend from ESTestCase
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
Many gradle projects specifically use the -try exclude flag, because
there are many cases where auto-closeable resource ignore is never
referenced in body of corresponding try statement. Suppressing this
warning specifically in each case that it happens using
`@SuppressWarnings("try")` would be very verbose.
This change removes `-try` from any gradle project and adds it to the
build plugin. Also this change removes exclude flags from gradle projects
that is already specified in build plugin (for example -deprecation).
Relates to #40366
* [ML] Addressing bug streaming DatafeedConfig aggs from (<= 6.5.4) -> 6.7.0 (#40610)
* Addressing stream failure and adding tests to catch such in the future
* Add aggs to full cluster restart tests
* Test BWC for datafeeds with and without aggs
The wire serialisation is different for null/non-null
aggs, so it's worth testing both cases.
* Fixing bwc test, removing types
* Fixing BWC test for datafeed
* Update 40_ml_datafeed_crud.yml
* Update build.gradle
This change removes the variants of the rolling upgrade and full
cluster restart tests that use or do not use a system key. These tests
were added during 5.x when the system key was still used for security
and now the system key is only used as the watcher encryption key so
duplicating rolling upgrade and full cluster restarts is not needed.
The change here removes the subprojects for testing these scenarios and
defaults to always run with the watcher sensitive values encrypted for
these tests.
This commit enables full-cluster-restart and rolling-upgrade tests
to run with nodes using a JVM in fips approved only node by using
PEM key material instead of a JKS for the transport layer in that
case.
This change is a backport of #39252
- Fixes TokenBackwardsCompatibilityIT: Existing tests seemed to made
the assumption that in the oneThirdUpgraded stage the master node
will be on the old version and in the twoThirdsUpgraded stage, the
master node will be one of the upgraded ones. However, there is no
guarantee that the master node in any of the states will or will
not be one of the upgraded ones.
This class now tests:
- That we can generate and consume tokens before we start the
rolling upgrade.
- That we can consume tokens generated in the old cluster during
all the stages of the rolling upgrade.
- That while on a mixed cluster, when/if the master node is
upgraded, we can generate, consume and refresh a token
- That after the rolling upgrade, we can consume a token
generated in an old cluster and can invalidate it so that it
can't be used any more.
- Ensures that during the rolling upgrade, the upgraded nodes have
the same configuration as the old nodes. Specifically that the
file realm we use is explicitly named `file1`. This is needed
because while attempting to refresh a token in a mixed cluster
we might create a token hitting an old node and attempt to refresh
it hitting a new node. If the file realm name is not the same, the
refresh will be seen as being made by a "different" client, and
will, thus, fail.
- Renames the Authentication variable we check while refreshing a
token to be clientAuth in order to make the code more readable.
Some of the above were possibly causing the flakiness of #37379
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
The rest of `CCRIT` is now no longer relevant, because the remaining
test tests the same of the index following test in the rolling upgrade
multi cluster module.
Added `tests.upgrade_from_version` version to test. It is not needed
in this branch, but is in 6.7 branch.
Closes#37231
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
* Rename integTest to bwcTestSample for bwc test projects
This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.
This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.
* Rename task as per PR
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
Made the test tolerant to index upgrade being run
in between the old/mixed/upgraded portions. This
can occur because the rolling upgrade tests all
share the same indices.
Fixes#37763
This commit removes the Index Audit Output type, following its deprecation
in 6.7 by 8765a31d4e6770. It also adds the migration notice (settings notice).
In general, the problem with the index audit output is that event indexing
can be slower than the rate with which audit events are generated,
especially during the daily rollovers or the rolling cluster upgrades.
In this situation audit events will be lost which is a terrible failure situation
for an audit system.
Besides of the settings under the `xpack.security.audit.index` namespace, the
`xpack.security.audit.outputs` setting has also been deprecated and will be
removed in 7. Although explicitly configuring the logfile output does not touch
any deprecation bits, this setting is made redundant in 7 so this PR deprecates
it as well.
Relates #29881
This change moves the update to the results index mappings
from the open job action to the code that starts the
autodetect process.
When a rolling upgrade is performed we need to update the
mappings for already-open jobs that are reassigned from an
old version node to a new version node, but the open job
action is not called in this case.
Closes#37607
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
* ML: add migrate anomalies assistant
* adjusting failure handling for reindex
* Fixing request and tests
* Adding tests to blacklist
* adjusting test
* test fix: posting data directly to the job instead of relying on datafeed
* adjusting API usage
* adding Todos and adjusting endpoint
* Adding types to reindexRequest
* removing unreliable "live" data test
* adding index refresh to test
* adding index refresh to test
* adding index refresh to yaml test
* fixing bad exists call
* removing todo
* Addressing remove comments
* Adjusting rest endpoint name
* making service have its own logger
* adjusting validity check for newindex names
* fixing typos
* fixing renaming
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
The phrase "missing authentication token" is historic and is based
around the use of "AuthenticationToken" objects inside the Realm code.
However, now that we have a TokenService and token API, this message
would sometimes lead people in the wrong direction and they would try
and generate a "token" for authentication purposes when they would
typically just need a username:password Basic Auth header.
This change replaces the word "token" with "credentials".
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
* This commit is part of our plan to deprecate and ultimately remove the use of _xpack in the REST APIs.
- REST API docs
- HLRC docs and doc tests
- Handle REST actions with deprecation warnings
- Changed endpoints in rest-api-spec and relevant file names
For each API, the following updates were made:
- Add deprecation warnings to `Rest*Action`, plus tests in `Rest*ActionTests`.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
Moves all remaining (rolling-upgrade and mixed-version) REST tests to use Zen2. To avoid adding
extra configuration, it relies on Zen2 being set as the default discovery type. This required a few
smaller changes in other tests. I've removed AzureMinimumMasterNodesTests which tests Zen1
functionality and dates from a time where host providers were not configurable and each cloud
plugin had its own discovery.type, subclassing the ZenDiscovery class. I've also adapted a few tests
which were unnecessarily adding addTestZenDiscovery = false for the same legacy reasons. Finally,
this also moves the unconfigured-node-name REST test to Zen2, testing the auto-bootstrapping
functionality in development mode when no discovery configuration is provided.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Martijn van Groningen
Dimitris Athanasiou
Marios Trivyzas
Yannick Welsch
Mark Vieira
Julie Tibshirani
David Roberts
Hendrik Muhs
Rory Hunter
Benjamin Trent
Jason Tedor
Alpar Torok
Ioannis Kakavas
Przemysław Witek
Jay Modi
Zachary Tong
Albert Zaharovits
Ioannis Kakavas
David Kyle
Martijn Laarman
Luca Cavanna
Nhat Nguyen
Marios Trivyzas
markharwood
Jim Ferenczi
Tim Vernum
Nik Everett
Christian Schneider
Michael Basnight
Armin Braun