The single shard optimization that we have in our search api changes the type of response returned by the query transport action name based on the shard search request. if the request goes to one shard, we will do query and fetch at the same time, hence the response will be different. The proxying layer used in cross cluster search was not aware of this distinction, which causes serialization issues every time a cross cluster search request goes to a single shard and goes through a gateway node which has to forward the shard request to a data node. The coordinating node would then expect a QueryFetchSearchResult while the gateway would return a QuerySearchResult.
Closes#26833
Since `#getAsMap` exposes internal representation we are trying to remove it
step by step. This commit is cleaning up some xcontent writing as well as
usage in tests
The ensure green approach to avoid allocation delays caused problems with other indices created by other tests which didn't use ensure green in the various cluster stages. This aligns testHistoryUUIDIsGenerated to use the same approach used by the other test.
This commit increases the amount of time to wait for green to accound for unassigned shards that
have been delayed. The default delay is 60s, so we need to wait longer than that. Previously, the
wait would timeout at 30s due to the rest client and the default for the cluster health api.
Closes#26742
The test starts with two old nodes and creates indices (without waiting for green, which is fixed here too). Then it restarts one of the nodes and waits for it to join the cluster. This wait condition only uses wait for yellow as our generic infra doesn't how many nodes are there in total. Once the restarted node is part of the cluster (mixed mode) the second old node is restarted. If indices are not fully allocated when that happens, the shards will go into delayed unassigned mode. If the recovery of the replica never completed we may end up with corrupted / no secondary copy on the node. This will cause the shards to be delayed for 1m before being reassigned and the test will time out.
It is the exciting return of the global checkpoint background
sync. Long, long ago, in snapshot version far, far away we had and only
had a global checkpoint background sync. This sync would fire
periodically and send the global checkpoint from the primary shard to
the replicas so that they could update their local knowledge of the
global checkpoint. Later in time, as we sped ahead towards finalizing
the initial version of sequence IDs, we realized that we need the global
checkpoint updates to be inline. This means that on a replication
operation, the primary shard would piggy back the global checkpoint with
the replication operation to the replicas. The replicas would update
their local knowledge of the global checkpoint and reply with their
local checkpoint. However, this could allow the global checkpoint on the
primary to advance again and the replicas would fall behind in their
local knowledge of the global checkpoint. If another replication
operation never fired, then the replicas would be permanently behind. To
account for this, we added one more sync that would fire when the
primary shard fell idle. However, this has problems:
- the shard idle timer defaults to five minutes, a long time to wait
for the replicas to learn of the new global checkpoint
- if a replica missed the sync, there was no follow-up sync to catch
them up
- there is an inherent race condition where the primary shard could
fall idle mid-operation (after having sent the replication request to
the replicas); in this case, there would never be a background sync
after the operation completes
- tying the global checkpoint sync to the idle timer was never natural
To fix this, we add two additional changes for the global checkpoint to
be synced to the replicas. The first is that we add a post-operation
sync that only fires if there are no operations in flight and there is a
lagging replica. This gives us a chance to sync the global checkpoint to
the replicas immediately after an operation so that they are always kept
up to date. The second is that we add back a global checkpoint
background sync that fires on a timer. This timer fires every thirty
seconds, and is not configurable (for simplicity). This background sync
is smarter than what we had previously in the sense that it only sends a
sync if the global checkpoint on at least one replica is lagging that of
the primary. When the timer fires, we can compare the global checkpoint
on the primary to its knowledge of the global checkpoint on the replicas
and only send a sync if there is a shard behind.
Relates #26591
The `fielddata` field and the use of the `_name` field in the short syntax of the range
query have been deprecated in 5.0 and can be removed.
The same goes for the deprecated `score_mode` field in HasParentQueryBuilder,
the deprecated `like_text`, `ids` and `docs` parameter in the `more_like_this` query,
the deprecated query name in the short version of the `regexp` query, and several
deprecated alternative field names in other query builders.
Restoring a shard from snapshot throws the primary back in time violating assumptions and bringing the validity of global checkpoints in question. To avoid problems, we should make sure that a shard that was restored will never be the source of an ops based recovery to a shard that existed before the restore. To this end we have introduced the notion of `histroy_uuid` in #26577 and required that both source and target will have the same history to allow ops based recoveries. This PR make sure that a shard gets a new uuid after restore.
As suggested by @ywelsch , I derived the creation of a `history_uuid` from the `RecoverySource` of the shard. Store recovery will only generate a uuid if it doesn't already exist (we can make this stricter when we don't need to deal with 5.x indices). Peer recovery follows the same logic (note that this is different than the approach in #26557, I went this way as it means that shards always have a history uuid after being recovered on a 6.x node and will also mean that a rolling restart is enough for old indices to step over to the new seq no model). Local shards and snapshot force the generation of a new translog uuid.
Relates #10708Closes#26544
The new ops based recovery, introduce as part of #10708, is based on the assumption that all operations below the global checkpoint known to the replica do not need to be synced with the primary. This is based on the guarantee that all ops below it are available on primary and they are equal. Under normal operations this guarantee holds. Sadly, it can be violated when a primary is restored from an old snapshot. At the point the restore primary can miss operations below the replica's global checkpoint, or even worse may have total different operations at the same spot. This PR introduces the notion of a history uuid to be able to capture the difference with the restored primary (in a follow up PR).
The History UUID is generated by a primary when it is first created and is synced to the replicas which are recovered via a file based recovery. The PR adds a requirement to ops based recovery to make sure that the history uuid of the source and the target are equal. Under normal operations, all shard copies will stay with that history uuid for the rest of the index lifetime and thus this is a noop. However, it gives us a place to guarantee we fall back to file base syncing in special events like a restore from snapshot (to be done as a follow up) and when someone calls the truncate translog command which can go wrong when combined with primary recovery (this is done in this PR).
We considered in the past to use the translog uuid for this function (i.e., sync it across copies) and thus avoid adding an extra identifier. This idea was rejected as it removes the ability to verify that a specific translog really belongs to a specific lucene index. We also feel that having a history uuid will serve us well in the future.
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
This commit refactors the bootstrap checks into a single result object
that encapsulates whether or not the check passed, and a failure message
if the check failed. This simpifies the checks, and enables the messages
to more easily be based on the state used to discern whether or not the
check passed.
Relates #26637
This exposes the node settings and the persistent part of the cluster state to the
bootstrap checks to allow plugins to enforce certain preconditions based on the
recovered state.
There is a bug in Log4j on JDK 9 for walking the stack to find where a
log line is coming from. This bug is impacting some of our testing, so
this commit marks these tests as skippable only on JDK 9 until the bug
is fixed upstream.
Relates #26467
The current script service has a script compilation limit for a one
minute window. This is set to a small default value of 15. Instead of
increasing that default value, this commit introduces a new setting
that allows to configure a rate per time unit, so that the script service can deal with bursts better.
The new setting is named `script.max_compilations_rate`,
requires a nonnegative number and a positive time value.
The default is `75/5m`, which is equivalent to the existing 15 per minute.
This commit adds writing build metadata to the `check` command for each
bwc project. This ensures the files will be written if doing a general
`gradle check`, which is what CI intake jobs do. In later jobs like
bwcTest, the extra bwc-release-snapshot info is needed.
Note this commit also has a little cleanup of the output for the bwc
checkout, as it was plastering a git warning, instead of the real info
we care about (the refspec and commit that were used).
When creating the keystore explicitly (from executing
elasticsearch-keystore create) or implicitly (for plugins that require
the keystore to be created on install) on an Elasticsearch package
installation, we are running as the root user. This leaves
/etc/elasticsearch/elasticsearch.keystore having the wrong ownership
(root:root) so that the elasticsearch user can not read the keystore on
startup. This commit adds setgid to /etc/elasticsearch on package
installation so that when executing this directory (as we would when
creating the keystore), we will end up with the correct ownership
(root:elasticsearch). Additionally, we set the permissions on the
keystore to be 660 so that the elasticsearch user via its group can read
this file on startup.
Relates #26412
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
This commit removes the keystore creation on elasticsearch startup, and
instead adds a plugin property which indicates the plugin needs the
keystore to exist. It does still make sure the keystore.seed exists on
ES startup, but through an "upgrade" method that loading the keystore in
Bootstrap calls.
closes#26309
By making RestHighLevelClient Closeable, its close method will close the internal low-level REST client instance by default, which simplifies the way most users interact with the high-level client.
Its constructor accepts now a RestClientBuilder, which clarifies that the low-level REST client is internally created and managed.
It is still possible to provide an already built `RestClient` instance, but that can only be done by subclassing `RestHighLevelClient` and calling the protected constructor that accepts a `RestClient`. In such case a consumer has also to be provided, which controls what has to be done when the high-level client gets done.
Closes#26086
This commit makes the security code aware of the Java 9 FilePermission changes (see #21534) and allows us to remove the `jdk.io.permissionsUseCanonicalPath` system property.
We previously explicitly set the HOSTNAME environment variable so that
${HOSTNAME} could be used a placeholder for defining the node.name in
elasticsearch.yml. We removed explicitly setting this because bash
defines HOSTNAME. The problem is that bash defines HOSTNAME as a bash
variable, not as an environment variable. Therefore, to restore the
previous behavior, we export the bash value for HOSTNAME as an
environment variable named HOSTNAME. For consistency between Windows and
the Unix-like systems, we also define HOSTNAME with a value equal to the
environment variable COMPUTERNAME on Windows.
Relates #26262
We previously added a RuntimeDirectory directive to the systemd service
file for Elasticsearch. This commit adds a packaging test for the
situation that this directive was intended to address.
Relates #26229
Our documentation for the API is:
```
The _upgrade API is no longer useful and will be removed.
Instead, see Reindex to upgrade.
```
Given that, I don't think we need to test the API anymore.
Closes#25311
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
This commit adds the nio transport as an option in place of the mock tcp
transport for tests. Each test will only use one transport type. The
transport type is decided by a random boolean generated inside of the
`ESTestCase` class.
This commit updates the version for master to 7.0.0-alpha1. It also adds
the 6.1 version constant, and fixes many tests, as well as marking some
as awaits fix.
Closes#25893Closes#25870
When ES starts up we verify we can write to all data folders and that they support atomic moves. We do so by creating and deleting temp files. If for some reason the files was successfully created but not successfully deleted, we still shut down correctly but subsequent start attempts will fail with a file already exists exception.
This commit makes sure to first clean any existing temporary files.
Superseeds #21007
We set some limits in the service file for Elasticsearch when installed
as a service on systemd-based systems. This commit adds a packaging test
that these limits are indeed set correctly.
Relates #25976
This commit removes some useless empty lines checks from the evil JNA
tests. These empty lines checks are useless because if the lines are
actually empty, the for loop will never be entered and we will hit the
fail condition at the bottom as intended anyway.
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
This commit removes a rolling upgrade test for scripting that is totally
busted yet is preventing builds from succeeding. We elect to remove this
test as opposed to skipping the test as:
- it has beeen being skipped for months with no apparent loss
- it appears to need significant work to get to an unbusted state
This commit cleans up a few items with the script packaging:
- remove the now dead elasticsearch.in.sh script
- add assertions for the existence elasticsearch-env and
elasticsearch-keystore
The Writeble representation is less heavy to parse and that will benefit percolate performance and throughput.
The query builder's binary format has now the same bwc guarentees as the xcontent format.
Added a qa test that verifies that percolator queries written in older versions are still readable by the current version.
This commit fixes tests for environment-aware commands. A previous
change added a check that es.path.conf is not null. The problem is that
this system property is not being set in tests so this check trips every
single time. To fix this, we move the check into a method that can be
overridden, and then override this method in relevant places in tests to
avoid having to set the property in tests. We also add a test that this
check works as expected.
Today when we aggregate on the `_index` field the cross cluster search
alias is not taken into account. Neither is it respected when we search
on the field. This change adds support for cluster alias when the cluster
alias is present on the `_index` field.
Closes#25606
This commit removes all external dependencies from the rest client jar
and shades them in an 'org.elasticsearch.client' package within the jar
using shadowJar gradle plugin. All projects that depended on the
existing jar have been converted to using the 'org.elasticsearch.client'
package prefixes to interact with the rest client.
Closes#25208
This commit introduces the elasticsearch-env script. The purpose of this
script is threefold:
- vastly simplify the various scripts used in Elasticsearch
- provide a script that can be included in other scripts in the
Elasticsearch ecosystem (e.g., plugins)
- correctly establish the environment for all scripts (e.g., so that
users can run `elasticsearch-keystore` from a package distribution
without having to worry about setting `CONF_DIR` first, otherwise the
keystore would be created in the wrong location)
Relates #25815
This commit removes legacy checks for unsupported an environment
variable and unsupported system properties. This environment variable
and these system properties have not been supported since 1.x so it is
safe to stop checking for the existence of these settings.
Relates #25809
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
This commit reverts a rename of the systemd packaging tests. The rename
was done locally to speed up iteration of testing some changes against
systemd but was not reverted before pushing. This commit reverts this
change.
On Debian-based systems the install scripts are run with set -e meaning
that if there is an error in executing one of these scripts then the
script fails. If systemd-sysctl is masked then trying to restart the
systemd-sysctl service to pick up the changes to vm.max_map_count will
fail leading to the post-install script failing. Instead, we should
account for the possbility of failure here by not letting the command to
restart this service exit with non-zero status code. This commit does
this, and adds a test for this situation.
Relates #25657
We lost the cluster alias due to some special caseing in inner hits
and due to the fact that we didn't pass on the alias to the shard request.
This change ensures that we have the cluster alias present on the shard to
ensure all SearchShardTarget reads preserve the alias.
Relates to #25606
This commit enables the console appender for the settings deprecation
logger used in the deprecated settings logging test. This output will be
useful if this test fails again (it failed once mysteriously).
* Improved REST endpoint exception handling, see #15335
Also improved OPTIONS http method handling to better conform with the
http spec.
* Tidied up formatting and comments
See #15335
* Tests for #15335
* Cleaned up comments, added section number
* Swapped out tab indents for space indents
* Test class now extends ESSingleNodeTestCase
* Capture RestResponse so it can be examined in test cases
Simple addition to surface the RestResponse object so we can run tests
against it (see issue #15335).
* Refactored class name, included feedback
See #15335.
* Unit test for REST error handling enhancements
Randomizing unit test for enhanced REST response error handling. See
issue #15335 for more details.
* Cleaned up formatting
* New constructor to set HTTP method
Constructor added to support RestController test cases.
* Refactored FakeRestRequest, streamlined test case.
* Cleaned up conflicts
* Tests for #15335
* Added functionality to ignore or include path wildcards
See #15335
* Further enhancements to request handling
Refactored executeHandler to prioritize explicit path matches. See
#15335 for more information.
* Cosmetic fixes
* Refactored method handlers
* Removed redundant import
* Updated integration tests
* Refactoring to address issue #17853
* Cleaned up test assertions
* Fixed edge case if OPTIONS method randomly selected as invalid method
In this test, an OPTIONS method request is valid, and should not return
a 405 error.
* Remove redundant static modifier
* Hook the multiple PathTrie attempts into RestHandler.dispatchRequest
* Add missing space
* Correctly retrieve new handler for each Trie strategy
* Only copy headers to threadcontext once
* Fix test after REST header copying moved higher up
* Restore original params when trying the next trie candidate
* Remove OPTIONS for invalidHttpMethodArray so a 405 is guaranteed in tests
* Re-add the fix I already added and got removed during merge :-/
* Add missing GET method to test
* Add documentation to migration guide about breaking 404 -> 405 changes
* Explain boolean response, pull into local var
* fixup! Explain boolean response, pull into local var
* Encapsulate multiple HTTP methods into PathTrie<MethodHandlers>
* Add PathTrie.retrieveAll where all matching modes can be retrieved
Then TrieMatchingMode can be package private and not leak into RestController
* Include body of error with 405 responses to give hint about valid methods
* Fix missing usageService handler addition
I accidentally removed this :X
* Initialize PathTrieIterator modes with Arrays.asList
* Use "== false" instead of !
* Missing paren :-/
In the past global checkpoint syncing was done in the background based an interval set by an index setting. In order to set that setting something reasonable for a test, the master needed to know about the setting. Therefore the test didn't check global checkpoints if the master was old. These days the global checkpoint sync is inlined with indexing operations and that restriction is not needed.
In the rolling upgrade tests, there is a test to create an index with
replica shards and ensure that in the mixed cluster environment, the
cluster health is green before any other tests are executed. However,
there were two problems with this. First, if the replica shard was
residing on the restarted node, then delayed allocation will kick in and
cause the cluster health request to timeout after 1m. The fix to this
was to drastically lower the delayed allocation setting. Second, if the
primary exists on the higher version node, then the replica cannot be
assigned to the lower version node because recovery cannot happen from
lower lucene versions. The fix here was to wait for the cluster health
to be yellow instead of green in the mixed cluster environment. In the
fully upgraded cluster, the cluster health check waits for a green
cluster as before.
Closes#25185
In 6.x we prevent multiple types and default to `index.mapping.single_type: false`
This change removes the registered setting and ensures that it's preserved for
5.x indices.
Relates to #24961
This commit adds an LRU set to used to determine if a keyed deprecation
message should be written to the deprecation logs, or only added to the
response headers on the thread context.
Relates #25474
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
When a setting is deprecated, if that setting is used repeatedly we
currently emit a deprecation warning every time the setting is used. In
cases like hitting settings endpoints over and over against a node with
a lot of deprecated settings, this can lead to excessive deprecation
warnings which can crush a node. This commit ensures that a given
setting only sees deprecation logging at most once.
Relates #25457
This commit changes how we determine if there were any remote indices that a search should have
been executed against. Previously, we used the list of remote shard iterators but if the remote
index pattern resolved to no indices there would be no remote shard iterators even though the
request specified remote indices. The map of remote cluster names to the original indices is used
instead so that we can determine if there were remote indices even when there are no remote shard
iterators.
Closes#25426
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
This removes the remaining usage of `mapping.single_type` from the parent join
module and moves it's bwc test to the mixed cluster tests
Relates to #24961
Relates to #20257
* Remove the setting from the yml tests and replace with tests using
`join` field. We can't use the setting in yml tests without lots of
backflips but we have `ReindexParentChildTests` for the coverage.
There weren't tests for `join` field with reindex before this. Adding
these tests discovered #25363.
* Remove the setting from `ReindexParentChildTests` and replace with
`index.version.created=V_5_6_0`. This test can be entirely removed
when legacy parent/child support is dropped from core.
* Port the yml tests that set _parent into integ tests so they
can set the index created version. These tests can be removed
when we drop support for _parent in core.
* Port a delete-by-query test for filtering based on type to an
`ESIntegTestCase` so it can use `index.version.created=5.6.0` to
setup documents of multiple types. This whole feature can be dropped
when we no longer support multiple types per index.
Relates to #24961
OldIndexBackwardsCompatibilityIT#testOldClusterStates tested whether global and index metadata could be read from data directory,
this can also be tested in full cluster qa test that checks cluster state via api.
Relates to #24939
Ports all of RepositoryUpgradabilityIT to qa:full-cluster-restart and ports as much of RestoreBackwardsCompatIT as possible into qa:full-cluster-restart.
This commit adds a gradle project, set inside the root build.gradle,
which controls all our bwc tests. This allows for seamless (ie no errant
CI failures) backporting of behavior.
In #25201, a setting was added to allow setting the retry timeout for the rest client under the
impression that this would allow requests to go longer than 30s. However, there is also a socket
timeout that needs to be set to greater than 30s, which this change adds a setting for.
This commit adds a setting to change the request timeout for the rest client. This is useful as the
default timeout is 30s, which is also the same default for calls like cluster health. If both are
the same then the response from the cluster health api will not be received as the client usually
times out first making test failures harder to debug.
Relates #25185
Duplicate data paths already fail to work because we would attempt to
take out a node lock on the directory a second time which will fail
after the first lock attempt succeeds. However, how this failure
manifests is not apparent at all and is quite difficult to
debug. Instead, we should explicitly reject duplicate data paths to make
the failure cause more obvious.
Relates #25178
We have a custom logger implementation known as a prefix logger that is
used to write every message by the logger with a given prefix. This is
useful for node-level, index-level, and shard-level messages where we
want to log the node name, index name, and shard ID, respectively, if
possible. The mechanism that we employ is that of a marker. Log4j has a
built-in facility for managing these markers, but its effectively a
memory leak because these markers are held in a map and can never be
released. This is problematic for us since indices and shards do not
necessarily have infinite life spans and so on a node where there are
many indices being creted and destroyed, this infinite lifespan can be a
problem indeed. To solve this, we use our own cache of markers. This is
necessary to prevent too many instances of the marker for the same
prefix from being created (just think of all the shard-level components
that exist in the system), and to workaround the effective leak in
Log4j. These markers are stored as weak references in a weak hash
map. It is these weak references that are unneeded. When a key is
removed from a weak hash map, the corresponding entry is placed on a
reference queue that is eventually cleared. This commit simplifies
prefix logger by removing this unnecessary weak reference wrapper.
Relates #22460
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
This adds an option to `ClusterConfiguration` to preserve the
`shared` directory when starting up a new cluster and switches
the `qa:full-cluster-restart` tests to use it rather than
disable the clean shared task.
Relates to #24846
We're using Vagrant in more places now than before. This commit includes a plugin that verifies
the Vagrant and Virtualbox installations for projects that depend on them. This shared code
should fix up the errors we've seen from CI builds relating to the new Kerberos fixture.
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
We default to 0 replicas in the rolling restart scenario already to ensure
we test against worst case. Yet, this adds a dummy index to ensure we also
recover and index with replicas just fine.
The Lucene version expectation in the verify Lucene version test is
backwards, mixing up the expected and actual values. This commit
reorders them to fix this issue.
The Lucene version constants for 5.4.1 and 5.5.0 are wrong, they are
listed as 6.5.0 instead of 6.5.1. This commit fixes these issues, and
adds a test to ensure that this does not happen again.
Relates #24923
Removes the need for the `_UNRELEASED` suffix on versions by detecting if a version should be unreleased or not based on the versions around it. This should make it simpler to automate the task of adding a new version label.
These tests spin up two nodes of an older version of Elasticsearch,
create some stuff, shut down the nodes, start the current version,
and verify that the created stuff works.
You can run `gradle qa:full-cluster-restart:check` to run these
tests against the head of the previous branch of Elasticsearch
(5.x for master, 5.4 for 5.x, etc) or you can run
`gradle qa:full-cluster-restart:bwcTest` to run this test against
all "index compatible" versions, one after the other. For master
this is every released version in the 5.x.y version *and* the tip
of the 5.x branch.
I'd love to add more to these tests in the future but these
currently just cover the functionality of the `create_bwc_index.py`
script and start to cover the assertions in the
`OldIndexBackwardsCompatibilityIT` test.
This is a simple refactoring to move the context definitions into the
type that they use. While we have multiple context names for the same
class at the moment, this will eventually become one ScriptContext per
instance type, so the pattern of a static member on the interface called
CONTEXT can be used. This commit also moves the consolidated list of
contexts provided by core ES into ScriptModule.
As we work towards contexts implying the return type of compilation, we
first need ScriptContext to not be an enum. This commit removes the
Standard enum and Plugin subclass of ScriptContext.
ScriptEngine implementations have an overridable method to indicate they
are safe to use as inline scripts. Since groovy was removed fro 6.0,
there are no longer any implementations which used the default false
value. Furthermore, the value was not actually read anywhere. This
commit removes the method. The ScriptEngineRegistry was also no longer
necessary as it only was used to build a map from language to engine.
This commit renames the backwards-5.0 qa test to mixed-cluster and
creates a test within the project per wire compat version. Like with
rolling upgrade tests, the integTest task will run against the most
recent version, while all versions will be tested with the bwcTest task.
Now that we generate the versions list from Versions.java we can
drop the list of versions maintained for vagrant testing. One nice
thing that the vagrant testing did was to check if the list of
versions was out of date. This moves that test to the core
project.
This commit changes the rolling upgrade test to create a set of rest
test tasks per wire compat version. The most recent wire compat version
is always tested with the `integTest` task, and all versions can be
tested with `bwcTest`.
This commit expands the logic for version extraction from Version.java
to include a list of all versions for backcompat purposes. The tests
using bwcVersion are converted to use this list, but those tests
(rolling upgrade and backwards-5.0) are still not randomized; that will
happen in another followup.
Today the `_field_caps` API doesn't implement its request serialization
correctly since indices and indices options are not serialized at all.
This will likely break with all transport clients etc. and if this request
must be send across the network. This commit fixes this and adds correct
handling if we have only remote indices to prevent the inclusion of
all local indices.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
In windows we can't reliable git the pid so we skip the
reindex-from-remote tests from old versions of elasticsearch. This
is OK because we aren't really testing windows here anyway. It isn't
great, but should be safe.
Two of the versions of Elasticsearch we need to run for these tests
can't run in Java 9 so we skip the entire test if we are running in
java 9. For now. I'd like to reenable it to run against java 8 if
there is one available, but that can wait for another time.
Relates to #24561
Adds tests for reindex-from-remote for the latest 2.4, 1.7, and
0.90 releases. 2.4 and 1.7 are fairly popular versions but 0.90
is a point of pride.
This fixes any issues those tests revealed.
Closes#23828Closes#24520
This commit renames ScriptEngineService to ScriptEngine. It is often
confusing because we have the ScriptService, and then
ScriptEngineService implementations, but the latter are not services as
we see in other places in elasticsearch.
File scripts have 2 related settings: the path of file scripts, and
whether they can be dynamically reloaded. This commit deprecates those
settings.
relates #21798
Today we rely on background syncs to relay the global checkpoint under
the mandate of the primary to its replicas. This means that the global
checkpoint on a replica can lag far behind the primary. The commit moves
to inlining global checkpoints with replication requests. When a
replication operation is performed, the primary will send the latest
global checkpoint inline with the replica requests. This keeps the
replicas closer in-sync with the primary.
However, consider a replication request that is not followed by another
replication request for an indefinite period of time. When the replicas
respond to the primary with their local checkpoint, the primary will
advance its global checkpoint. During this indefinite period of time,
the replicas will not be notified of the advanced global
checkpoint. This necessitates a need for another sync. To achieve this,
we perform a global checkpoint sync when a shard falls idle.
Relates #24513
Previously, Mustache would call `toString` on the `_ingest.timestamp`
field and return a date format that did not match Elasticsearch's
defaults for date-mapping parsing. The new ZonedDateTime class in Java 8
happens to do format itself in the same way ES is expecting.
This commit adds support for a feature flag that enables the usage of this new date format
that has more native behavior.
Fixes#23168.
This new fix can be found in the form of a cluster setting called
`ingest.new_date_format`. By default, in 5.x, the existing behavior
will remain the same. One will set this property to `true` in order to
take advantage of this update for ingest-pipeline convenience.
When installing plugin permissions, we try to set the permissions on all
installed files ourselves because a umask from the user could violate
everything needed to get the permissions right. Sadly, directories were
not handled correctly at all and so we were still left with broken
installations with umasks like 0077. This commit fixes this issue, adds
a thorough unit test for the situation, and most importantly, adds a
test that sets the umask before installing the plugin.
Relates #24527
The license header in this file was after and on the same line as the
package statement. This commit moves the package statement to be after
the license header.
Netty uses the number of processors for sizing various resources (e.g.,
thread pools, buffer pools, etc.). However, it uses the runtime number
of available processors which might not match the configured number of
processors as set in Elasticsearch to limit the number of threads (for
example, in Docker containers). A new feature was added to Netty that
enables configuring the number of processors Netty should see for sizing
this various resources. This commit takes advantage of this feature to
set this number of available processors to be equal to the configured
number of processors set in Elasticsearch.
Relates #24420
The tribe service can take a while to initialize, depending on how many cluster it needs to connect to. This change moves writing the ports file used by tests to before the tribe service is started.
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
The bats tests are descructive and must be run as root. This is a
horrible combination on any sane system but perfectly fine to do
in a VM. This change modifies the tests so they revuse to start
unless they are in an environment with an `/etc/is_vagrant_vm`
file. The Vagrantfile creates it on startup.
Closes#24137
If the user explicitly configured path.data to include
default.path.data, then we should not fail the node if we find indices
in default.path.data. This commit addresses this.
Relates #24285
In #24251 we fix an issue with stored search templates that
this test would have discovered: stored search templates cause
the node to refuse to start. Technically a "restart" test would
have caught this as well and would have caught it more quickly.
But we already *have* an upgrade test and we don't have restart tests.
And testing this on upgrade is a good thing too.
It seems that Wildfly 10 can not be made to start in a fully-functional
form on JDK 9, so this commit skips running the Wildfly integration
tests on JDK 9.
An important use case for our users is deploying our clients inside of
applications containers like Wildly. Sometimes, we make changes that
unintentionally break this use case. We need to know before we ship a
release that we have broken such use cases. As Wildfly is one of the
bigger application containers, this commit starts by adding an
integration test that deploys an application using the transport client
to Wildfly and ensures that all is well. Future work can add similar
integration tests for the low-level and high-level REST clients.
Relates #24147
The plugin cli currently resides inside the elasticsearch jar. This
commit moves it into a plugin-cli jar. This is change alone is a no-op;
it does not change anything about what is loaded at runtime. But it will
allow easier testing (with fixtures in the future to test ES or maven
installation), as well as eventually not loading these classes when
starting elasticsearch.
This leniency was left in after plugin installer refactoring for 2.0
because some tests still relied on it. However, the need for this
leniency no longer exists.
* Replicate write failures
Currently, when a primary write operation fails after generating
a sequence number, the failure is not communicated to the replicas.
Ideally, every operation which generates a sequence number on primary
should be recorded in all replicas.
In this change, a sequence number is associated with write operation
failure. When a failure with an assinged seqence number arrives at a
replica, the failure cause and sequence number is recorded in the translog
and the sequence number is marked as completed via executing `Engine.noOp`
on the replica engine.
* use zlong to serialize seq_no
* Incorporate feedback
* track write failures in translog as a noop in primary
* Add tests for replicating write failures.
Test that document failure (w/ seq no generated) are recorded
as no-op in the translog for primary and replica shards
* Update to master
* update shouldExecuteOnReplica comment
* rename indexshard noop to markSeqNoAsNoOp
* remove redundant conditional
* Consolidate possible replica action for bulk item request
depanding on it's primary execution
* remove bulk shard result abstraction
* fix failure handling logic for bwc
* add more tests
* minor fix
* cleanup
* incorporate feedback
* incorporate feedback
* add assert to remove handling noop primary response when 5.0 nodes are not supported
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
After splitting integ tests into cluster configuration and the test
runner task, we still have dependencies of the test runner added as deps
of the cluster. This commit adds dependencies directly to the cluster,
so that the runner can have other dependencies independent of what is
needed for the cluster.
We have some packaging tests where we use a custom jvm.options file. The
flags we use here are barebones, just enough to exercise that using a
custom jvm.options files actually works. Due to this, we are missing a
Log4j flag that prevents Log4j from trying to use JMX. If Log4j tries to
use JMX, it hits a security manager exception and tries to log
this. This attempt to log happens before we've configured
logging. Previously, Elasticsearch was lenient here so this was treated
as harmless and the test could march on. Now, we fail startup if we
detect an attempt to log before logging is configured so this prevents
Elasticsearch from starting if we do not have jvm.options files in place
that prevent these log messages from being written before logging is
being configured. This commit adds jvm.options files in the places need
to prevent this.
These tests were marked as awaits fix due to JNA requiring a version of
glibc greater than or equal to version 2.14. Since we still support
systems that would not have this version, we have released our own JNA
dependency that is built to support earlier versions of glibc. This
commit removes some await fixes that were added to tests that failed as
a result of this situation.
It can easily happen that we touch a logger before logging is configured
due to chains of static intializers and other such scenarios. This
commit adds detection for this mechanism that will fail startup if we
touch a logger before logging is configured. This is a bug that will
cause builds to fail.
Relates #24076
This is related to #23893. This commit allows users to use wilcards for
cluster names when executing a cross cluster search.
So instead of defining every cluster such as:
GET one:*,two:*,three:*/_search
A user could just search:
GET *:*/_search
As ":" characters are currently allowed in index names, if the text
up to the first ":" does not match a defined cluster name, the entire
string is treated as an index name.
All our actions that are invoked from rest actions have corresponding
transport actions. This adds the transport action for RestRemoteClusterInfoAction
for consistency.
Relates to #23969
This commit fixes the handling of POSIX permissions on Windows in the
spawner tests. Since POSIX permissions do not exist there, we first have
to check if we are on a filesystem that supports POSIX or not before
attempting to set the permissions.
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
This commit adds a single node discovery type. With this discovery type,
a node will elect itself as master and never form a cluster with another
node.
Relates #23595
We currently have the last minor version of the previous major hardcoded
in tests like rolling upgrade. This change programatically finds this
during gradle initialization by parsing versions from Version.java.
These tests were disabled due to an issue in Netty which has since been
resolved and integrated into Elasticsearch.
Relates elastic/elasticsearch#20260
The current rest backcompat tests, which run against a mixed cluster of
5.x and 6.0 nodes, depend on snapshot builds of 5.x. However, this has
the potential for inconsistency that results in CI failures, and happens
quite often, whenever some backcompat logic is added to 5.x, but the bwc
test on master fails because the 5.x code has not yet been published as
a snapshot.
This change creates a git clone of the 5.x branch,
builds the zip distribution, and ties that into gradle substitutions for
the 5.x version.
We currently use POSIX exit codes in all of our CLIs. However, posix
only suggests these exit codes are standard across tools. It does not
prescribe particular uses for codes outside of that range. This commit
adds 2 exit codes specific to plugin installation to make distinguishing
an incorrectly built plugin and a plugin already existing easier.
closes#15295
This commit catches the underlying failure when trying to list plugin
information when a plugin is incompatible with the current version of
elasticsearch. This could happen when elasticsearch is upgraded but old
plugins still exist. With this change, all plugins will be output,
instead of failing at the first out of date plugin.
closes#20691
This commit marks the EvilJNANativesTests as awaiting fixes due to these
tests failing on platforms that do not provide at least version 2.14 of
glibc.
This commit adds a system property that enables end-users to explicitly
enforce the bootstrap checks, independently of the binding of the
transport protocol. This can be useful for single-node production
systems that do not bind the transport protocol (and thus the bootstrap
checks would not be enforced).
Relates #23585
Throw error when skip or do sections are malformed, such as they don't start with the proper token (START_OBJECT). That signals bad indentation, which would be ignored otherwise. Thanks (or due to) our pull parsing code, we were still able to properly parse the sections, yet other runners weren't able to.
Closes#21980
* [TEST] fix indentation in matrix_stats yaml tests
* [TEST] fix indentation in painless yaml test
* [TEST] fix indentation in analysis yaml tests
* [TEST] fix indentation in generated docs yaml tests
* [TEST] fix indentation in multi_cluster_search yaml tests
Gradle's finalizedBy on tasks only ensures one task runs after another,
but not immediately after. This is problematic for our integration tests
since it allows multiple project's integ test clusters to be
simultaneously. While this has not been a problem thus far (gradle 2.13
happened to keep the finalizedBy tasks close enough that no clusters
were running in parallel), with gradle 3.3 the task graph generation has
changed, and numerous clusters may be running simultaneously, causing
memory pressure, and thus generally slower tests, or even failure if the
system has a limited amount of memory (eg in a vagrant host).
This commit reworks how integ tests are configured. It adds an
`integTestCluster` extension to gradle which is equivalent to the current
`integTest.cluster` and moves the rest test runner task to
`integTestRunner`. The `integTest` task is then just a dummy task,
which depends on the cluster runner task, as well as the cluster stop
task. This means running `integTest` in one project will both run the
rest tests, and shut down the cluster, before running `integTest` in
another project.
* Make document write requests immutable
Previously, write requests were mutated at the
transport level to update request version, version type
and sequence no before replication.
Now that all write requests go through the shard bulk
transport action, we can use the primary response stored
in item level bulk requests to pass the updated version,
seqence no. to replicas.
* incorporate feedback
* minor cleanup
* Add bwc test to ensure correct index version propagates to replica
* Fix bwc for propagating write operation versions
* Add assertion on replica request version type
* fix tests using internal version type for replica op
* Fix assertions to assert version type in replica and recovery
* add bwc tests for version checks in concurrent indexing
* incorporate feedback
In the packaging tests we make some requests to Elasticsearch as part of
the tests. These requests were not setting the content-type header. This
commit addresses this.
In the packaging tests we make some requests to Elasticsearch as part of
the tests. These requests were not setting the content-type header. This
commit addresses this.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
These images have been rebuilt to be preloaded with java 8 installed.
This change re-enables the systems. It also removes some redundancy in
the rpm checks I found while testing the new images, and fixes a
potential issue with generated resources in plugins where a stale dir
can cause junk to get into the distribution.
As part of #22116 we are going to forbid usage of api
java.net.URL#openStream(). However in a number of places across the
we use this method to read files from the local filesystem. This commit
introduces a helper method openFileURLStream(URL url) to read files
from URLs. It does specific validation to only ensure that file:/
urls are read.
Additionlly, this commit removes unneeded method
FileSystemUtil.newBufferedReader(URL, Charset). This method used the
openStream () method which will soon be forbidden. Instead we use the
Files.newBufferedReader(Path, Charset).
Today either all nodes in the cluster connect to remote clusters of only nodes
that have remote clusters configured in their node config. To allow global remote
cluster configuration but restrict connections to a set of nodes in the cluster
this change adds a new setting `search.remote.connect` (defaults to `true`) to allow
to disable remote cluster connections on a per node basis.
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
When a primary is relocated from an old node to a new node, it can have
ops in its translog that do not have a sequence number assigned. When a
file-based recovery is started, this can lead to skipping these ops when
replaying the translog due to a bug in the recovery logic. This commit
addresses this bug and adds a test in the BWC tests.
Relates #22945
Today if a user invokes the remove plugin command without specifying the
name of a plugin to remove, we arrive at a null pointer exception. This
commit adds logic to cleanly handle this situation and provide clear
feedback to the user.
Relates #22930
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
Currently, stored scripts use a namespace of (lang, id) to be put, get, deleted, and executed. This is not necessary since the lang is stored with the stored script. A user should only have to specify an id to use a stored script. This change makes that possible while keeping backwards compatibility with the previous namespace of (lang, id). Anywhere the previous namespace is used will log deprecation warnings.
The new behavior is the following:
When a user specifies a stored script, that script will be stored under both the new namespace and old namespace.
Take for example script 'A' with lang 'L0' and data 'D0'. If we add script 'A' to the empty set, the scripts map will be ["A" -- D0, "A#L0" -- D0]. If a script 'A' with lang 'L1' and data 'D1' is then added, the scripts map will be ["A" -- D1, "A#L1" -- D1, "A#L0" -- D0].
When a user deletes a stored script, that script will be deleted from both the new namespace (if it exists) and the old namespace.
Take for example a scripts map with {"A" -- D1, "A#L1" -- D1, "A#L0" -- D0}. If a script is removed specified by an id 'A' and lang null then the scripts map will be {"A#L0" -- D0}. To remove the final script, the deprecated namespace must be used, so an id 'A' and lang 'L0' would need to be specified.
When a user gets/executes a stored script, if the new namespace is used then the script will be retrieved/executed using only 'id', and if the old namespace is used then the script will be retrieved/executed using 'id' and 'lang'
This commit introduces sequence-number-based recovery. When a replica
has fallen out of sync, rather than performing a file-based recovery we
first attempt to replay operations since the last local checkpoint on
the replica. To do this, at the start of recovery the replica tells the
primary what its local checkpoint is. The primary will then wait for all
operations between that local checkpoint and the current maximum
sequence number to complete; this is to ensure that there are no gaps in
the operations that will be replayed from the primary to the
replica. This is a best-effort attempt as we currently have no
guarantees on the primary that these operations will be available; if we
are not able to replay all operations in the desired range, we just
fallback to file-based recovery. Later work will strengthen the
guarantees.
Relates #22484
This is related to #22116. URLRepository requires SocketPermission
connect. This commit introduces a new module called "repository-url"
where URLRepository will reside. With the new module, permissions can
be removed from core.
There are presently 7 ctor args used in any rest handlers:
* `Settings`: Every handler uses it to initialize a logger and
some other strange things.
* `RestController`: Every handler registers itself with it.
* `ClusterSettings`: Used by `RestClusterGetSettingsAction` to
render the default values for cluster settings.
* `IndexScopedSettings`: Used by `RestGetSettingsAction` to get
the default values for index settings.
* `SettingsFilter`: Used by a few handlers to filter returned
settings so we don't expose stuff like passwords.
* `IndexNameExpressionResolver`: Used by `_cat/indices` to
filter the list of indices.
* `Supplier<DiscoveryNodes>`: Used to fill enrich the response
by handlers that list tasks.
We probably want to reduce these arguments over time but
switching construction away from guice gives us tighter
control over the list of available arguments.
These parameters are passed to plugins using
`ActionPlugin#initRestHandlers` which is expected to build and
return that handlers immediately. This felt simpler than
returning an reference to the ctors given all the different
possible args.
Breaks java plugins by moving rest handlers off of guice.
This commit adds a MessyRestTestPlugin to the gradle build. It extends
StandaloneRestTestPlugin. The main piece of functionality that it adds
is to copy plugin-metadata from dependencies into the
generated-resources for the current test source. This is necessary to
ensure that permissions for dependencies are applied when running the
tests.
A current limitation is that the permissions are applied differently
than in the distribution sources. When permissions are granted to all
depedencies for a module or plugin, the permissions are granted to all
dependencies on the classpath for tests besides a few hardcoded
exclusions:
- es core
- es test framework
- lucene test framework
- randomized runner
- junit library
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
When logger.level is set, we end up configuring a logger named "level"
because we look for all settings of the form "logger\..+" as configuring
a logger. Yet, logger.level is special and is meant to only configure
the default logging level. This commit causes is to avoid not
configuring a logger named level.
Relates #22624
This commit removes a logging test that is now obsolete. This test was
added when we included a forked version of some Log4j 2 classes to
workaround a bug in Log4j 2. This bug was fixed and a version of Log4j 2
incorporating this fix was previously integrated into Elaticsearch. At
that time, the forked versions were removed, and this test should have
been removed with it.
* Fix Translog.Delete serialization for sequence numbers
Translog.Delete used `.writeVLong` instead of `.writeLong` for the sequence
number and primary term (and their respective "read" variants). This could lead
to issues where a 5.x node sent a translog operation with a negative sequence
number (-2 for unassigned seq no) that tripped an assertion serializing a
negative number and causing ES to exit.
Adds a unit test for serialization and a mixed-cluster REST test, since that was
how this was originally caught.
* Use more realistic values for random seqNum and primary term
* Add comment with TODO for removal in 7.0
* Change comment into an assert
Instead of `search.remote.seeds.${clustername}` we now specify the seeds as:
`search.remote.${clustername}.seeds` which is a real list setting compared to an unvalidated
group setting before.
`ToXContentObject` extends `ToXContent` without adding new methods to it, while allowing to mark classes that output complete xcontent objects to distinguish them from classes that require starting and ending an anonymous object externally.
Ideally ToXContent would be renamed to ToXContentFragment, but that would be a huge change in our codebase, hence we simply document the fact that toXContent outputs fragments with no guarantees that the output is valid per se without an external ancestor.
Relates to #16347
this commit adds full support for proxy nodes on the search layer.
This allows to connection only to a small set of nodes on a remote cluster
to exectue the search. The nodes will proxy the request to the correct node in the
cluster while the coordinting node doesn't need to be connected to the target node.
This change is the first towards providing the ability to store
sensitive settings in elasticsearch. It adds the
`elasticsearch-keystore` tool, which allows managing a java keystore.
The keystore is loaded upon node startup in Elasticsearch, and used by
the Setting infrastructure when a setting is configured as secure.
There are a lot of caveats to this PR. The most important is it only
provides the tool and setting infrastructure for secure strings. It does
not yet provide for keystore passwords, keypairs, certificates, or even
convert any existing string settings to secure string settings. Those
will all come in follow up PRs. But this PR was already too big, so this
at least gets a basic version of the infrastructure in.
The two main things to look at. The first is the `SecureSetting` class,
which extends `Setting`, but removes the assumption for the raw value of the
setting to be a string. SecureSetting provides, for now, a single
helper, `stringSetting()` to create a SecureSetting which will return a
SecureString (which is like String, but is closeable, so that the
underlying character array can be cleared). The second is the
`KeyStoreWrapper` class, which wraps the java `KeyStore` to provide a
simpler api (we do not need the entire keystore api) and also extend
the serialized format to add metadata needed for loading the keystore
with no assumptions about keystore type (so that we can change this in
the future) as well as whether the keystore has a password (so that we
can know whether prompting is necessary when we add support for keystore
passwords).
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Today if an older version of a plugin exists, we fail to notify the user
with a helpful error message. This happens because during plugin
verification, we attempt to read the plugin descriptors for all existing
plugins. When an older version of a plugin is sitting on disk, we will
attempt to read this old plugin descriptor and fail due to a version
mismatch. This leads to an unhelpful error message. Instead, we should
check for existence of the plugin as part of the verification phase, but
before attempting to read plugin descriptors for existing plugins. This
enables us to provide a helpful error message to the user.
Relates #22305
* Internal: Refactor SettingCommand into EnvironmentAwareCommand
This change renames and changes the behavior of SettingCommand to have
its primary method take in a fully initialized Environment for
elasticsearch instead of just a map of settings. All of the subclasses
of SettingCommand already did this at some point, so this just removes
duplication.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
Sequence BWC logic consists of two elements:
1) Wire level BWC using stream versions.
2) A changed to the global checkpoint maintenance semantics.
For the sequence number infra to work with a mixed version clusters, we have to consider situation where the primary is on an old node and replicas are on new ones (i.e., the replicas will receive operations without seq#) and also the reverse (i.e., the primary sends operations to a replica but the replica can't process the seq# and respond with local checkpoint). An new primary with an old replica is a rare because we do not allow a replica to recover from a new primary. However, it can occur if the old primary failed and a new replica was promoted or during primary relocation where the source primary is treated as a replica until the master starts the target.
1) Old Primary & New Replica - this case is easy as is taken care of by the wire level BWC. All incoming requests will have their seq# set to `UNASSIGNED_SEQ_NO`, which doesn't confuse the local checkpoint logic (keeping it at `NO_OPS_PERFORMED`)
2) New Primary & Old replica - this one is trickier as the global checkpoint service currently takes all in sync replicas into consideration for the global checkpoint calculation. In order to deal with old replicas, we change the semantics to say all *new node* in sync replicas. That means the replicas on old nodes don't count for the global checkpointing. In this state the seq# infra is not fully operational (you can't search on it, because copies may miss it) but it is maintained on shards that can support it. The old replicas will have to go through a file based recovery at some point and will get the seq# information at that point. There is still an edge case where a new primary fails and an old replica takes over. I'lll discuss this one with @ywelsch as I prefer to avoid it completely.
This PR also re-enables the BWC tests which were disabled. As such it had to fix any BWC issue that had crept in. Most notably an issue with the removal of the `timestamp` field in #21670.
The commit also includes a fix for the default value of the seq number field in replicated write requests (it was 0 but should be -2), that surface some other minor bugs which are fixed as well.
Last - I added some debugging tools like more sane node names and forcing replication request to implement a `toString`
Problem: We introduced the ability to shorten the rank eval request by using a
template in #20231. When playing with the API it turned out that there might be
use cases where - e.g. due to various heuristics - folks might want to translate
the original user query into more than just one type of Elasticsearch query.
Solution: Give each template an id that can later be referenced in the
actual requests.
Closes#21257
Today in the codebase we refer to seccomp everywhere instead of system
call filter even if we are not specifically referring to Linux. This
commit is a purely mechanical change to refer to system call filter
where appropriate instead of the general seccomp, and only leaves
seccomp in place when actually referring to the Linux implementation.
Relates #22243
Inline scripts defined in Ingest Pipelines are now compiled at creation time to preemptively catch errors on initialization of the pipeline.
Fixes#21842.
Moves the last of the "easy" parser construction into
`RestRequest`, this time with a new method
`RestRequest#contentParser`. The rest of the production
code that builds `XContentParser` isn't "easy" because it is
exposed in the Transport Client API (a Builder) object.
This commit enables CLI commands to be closeable and installs a runtime
shutdown hook to ensure that if the JVM shuts down (as opposed to
aborting) the close method is called.
It is not enough to wrap uses of commands in main methods in
try-with-resources blocks as these will not run if, say, the virtual
machine is terminated in response to SIGINT, or system shutdown event.
Relates #22126
Add checks to RankEvalSpec to safe guard against missing parameters.
Fail early in case no metric is supplied, no rated requests are supplied or the search source builder is missing but no template is supplied neither.
Add stricter checks around rank eval request parsing: Fail if in a rated request we see both, a verbatim request as well as request
template parameters.
Relates to #21260
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
Move rank-eval template compilation down to TransportRankEvalAction
Closes#21777 and #21465
Search templates for rank_eval endpoint so far only worked when sent through
REST end point
However we also allow templates to be set through a Java API call to
"setTemplate" on that same spec. This doesn't go through template execution so
fails further down the line.
To make this work, moved template execution further down, probably to
TransportRankEvalAction.
* Add template IT test for Java API
* Move template compilation to TransportRankEvalAction
Action filters currently have the ability to filter both the request and
response. But the response side was not actually used. This change
removes support for filtering responses with action filters.
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
This commit adds `qa/multi-cluster-search` which currently does a
simple search across 2 clusters. This commit also adds support for IPv6
addresses and fixes an issue where all shards of the local cluster are searched
when only a remote index was given.
* Scripting: Remove groovy scripting language
Groovy was deprecated in 5.0. This change removes it, along with the
legacy default language infrastructure in scripting.
We kept `netty_3` as a fallback in the 5.x series but now that master
is 6.0 we don't need this or in other words all issues coming up with
netty 4 will be blockers for 6.0.
* master: (22 commits)
Add proper toString() method to UpdateTask (#21582)
Fix `InternalEngine#isThrottled` to not always return `false`. (#21592)
add `ignore_missing` option to SplitProcessor (#20982)
fix trace_match behavior for when there is only one grok pattern (#21413)
Remove dead code from GetResponse.java
Fixes date range query using epoch with timezone (#21542)
Do not cache term queries. (#21566)
Updated dynamic mapper section
Docs: Clarify date_histogram bucket sizes for DST time zones
Handle release of 5.0.1
Fix skip reason for stats API parameters test
Reduce skip version for stats API parameter tests
Strict level parsing for indices stats
Remove cluster update task when task times out (#21578)
[DOCS] Mention "all-fields" mode doesn't search across nested documents
InternalTestCluster: when restarting a node we should validate the cluster is formed via the node we just restarted
Fixed bad asciidoc in boolean mapping docs
Fixed bad asciidoc ID in node stats
Be strict when parsing values searching for booleans (#21555)
Fix time zone rounding edge case for DST overlaps
...
There is not yet a BWC layer in sequence numbers. This commit sets the
BWC version to 6.0.0 for the BWC and rolling upgrade tests until this
BWC layer is built.
Adds a version constant for it, bwc indices, and a vagrant upgrade-from
version. Also bumps the "upgrade from" version for the backwards-5.0
test and adds `skip`s for tests that don't fail against 5.0 so we skip
them during the backwards testing.
Finally, this skips the "Shrink index via API" test because it fails
consistently for me. Inconsistently for CI, but consistently for me.
I'll work on making it consistent tomorrow.
In #21348 the command executed to run the packaging tests has been changed to "sudo -E bats ...", forcing all environment variables from the vagrant user to be passed to the `sudo` command. This breaks a test on opensuse-13 (the one where it checks that elasticsearch cannot be started when `java` is not found) because all the PATH from the user is passed to the sudo command.
This commit restores the previous behavior while allowing only necessary testing environment variables to be passed using a /etc/sudoers.d file.
This changes adds a test discovery (which internally uses the existing
mock zenping by default). Having the mock the test framework selects be a discovery
greatly simplifies discovery setup (no more weird callback to a Node
method).
Today when a node starts, we create dynamic socket permissions based on
the configured HTTP ports and transport ports. If no ports are
configured, we use the default port ranges. When a tribe node starts, a
tribe node creates an internal node client for connecting to each remote
cluster. If neither an explicit HTTP port nor transport ports were
specified, the default port ranges are large enough for the tribe node
and its internal node clients. If an explicit HTTP port or transport
port was specified for the tribe node, then socket permissions for those
ports will be created, but not for the internal node clients. Whether
the internal node clients have explicit ports specified, or attempt to
bind within the default range, socket permissions for these will not
have been created and the internal node clients will hit a permissions
issue when attempting to bind. This commit addresses this issue by also
accounting for tribe nodes when creating the dynamic socket
permissions. Additionally, we add our first real integration test for
tribe nodes.
This commit enables real BWC testing against a 5.1 snapshot. All
REST tests plus rolling upgrade test now run against a mixed version
cross major version cluster.
This commit enables real BWC testing against a 5.1 snapshot. All
REST tests plus rolling upgrade test now run against a mixed version
cross major version cluster.
This commit changes the current :elactisearch:qa:vagrant build file and transforms it into a Gradle plugin in order to reuse it in other projects.
Most of the code from the build.gradle file has been moved into the VagrantTestPlugin class. To avoid duplicated VMs when running vagrant tests, the Gradle plugin sets the following environment variables before running vagrant commands:
VAGRANT_CWD: absolute path to the folder that contains the Vagrantfile
VAGRANT_PROJECT_DIR: absolute path to the Gradle project that use the VagrantTestPlugin
The VAGRANT_PROJECT_DIR is used to share project folders and files with the vagrant VM. These folders and files are exported when running the task `gradle vagrantSetUp` which:
- collects all project archives dependencies and copies them into `${project.buildDir}/bats/archives`
- copy all project bats testing files from 'src/test/resources/packaging/tests' into `${project.buildDir}/bats/tests`
- copy all project bats utils files from 'src/test/resources/packaging/utils' into `${project.buildDir}/bats/utils`
It is also possible to inherit and grab the archives/tests/utils files from project dependencies using the plugin configuration:
apply plugin: 'elasticsearch.vagrant'
esvagrant {
inheritTestUtils true|false
inheritTestArchives true|false
inheritTests true|false
}
dependencies {
// Inherit Bats test utils from :qa:vagrant project
bats project(path: ':qa:vagrant', configuration: 'bats')
}
The folders `${project.buildDir}/bats/archives`, `${project.buildDir}/bats/tests` and `${project.buildDir}/bats/utils` are then exported to the vagrant VMs and mapped to the BATS_ARCHIVES, BATS_TESTS and BATS_UTILS environnement variables.
The following Gradle tasks have also be renamed:
* gradle vagrantSetUp
This task copies all the necessary files to the project build directory (was `prepareTestRoot`)
* gradle vagrantSmokeTest
This task starts the VMs and echoes a "Hello world" within each VM (was: `smokeTest`)
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
This commit ensure that VirtualBox is available in version 5.1+ in the system before running packaging tests. It also check for Vagrant version is now greater than 1.8.6.
The environment variable ES_JVM_OPTIONS allows end-users to specify a
custom location for the jvm.options file. Unfortunately, this
environment variable is not exported from the SysV init scripts. This
commit addresses this issue, and includes a test that ES_JVM_OPTIONS and
ES_JAVA_OPTS work for the SysV init packages.
Relates #21445
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Today if you start Elasticsearch with the status logger configured to
the warn level, or use a transport client with the default status logger
level, you will see warn messages about deprecation loggers being
created with different message factories and that formatting might be
broken. This happens because the deprecation logger is constructed using
the message factory from its parent, an artifact leftover from the first
Log4j 2 implementation that used a custom message factory. When that
custom message factory was removed, this constructor invocation should
have been changed to not explicitly use the message factory from the
parent. This commit fixes this invocation. However, we also had some
status checking to all tests to ensure that there are no warn status log
messages that might indicate a configuration problem with Log4j 2. These
assertions blow up badly without the fix for the deprecation logger
construction, and also caught a misconfiguration in one of the logging
tests.
Relates #21339
The usage information for `elasticsearch-plugin` is quiet verbose and makes the
actual error message that is shown when trying to remove an non-existing plugin
hard to spot. This changes the error code to not trigger printing the usage
information.
Closes#21250
Plugins: Remove pluggability of ZenPing
ZenPing is the part of zen discovery which knows how to ping nodes.
There is only one alternative implementation, which is just for testing.
This change removes the ability to add custom zen pings, and instead
hooks in the MockZenPing for tests through an overridden method in
MockNode. This also folds in the ZenPingService (which was really just a
single method) into ZenDiscovery, and removes the idea of having
multiple ZenPing instances. Finally, this was the last usage of the
ExtensionPoint classes, so that is also removed here.
When installing a plugin when the plugins directory does not exist, the
install plugin command outputs a line saying that it is creating this
directory. The packaging tests for the archive distributions accounted
for this including an assertion that this line was output. The packages
have since been updated to include an empty plugins folder, so this line
will no longer be output. This commit removes this stale assertion from
the packaging tests.
Relates #21275
Today when installing Elasticsearch from an archive distribution (tar.gz
or zip), an empty plugins folder is not included. This means that if you
install Elasticsearch and immediately run elasticsearch-plugin list, you
will receive an error message about the plugins directory missing. While
the plugins directory would be created when starting Elasticsearch for
the first time, it would be better to just include an empty plugins
directory in the archive distributions. This commit makes this the
case. Note that the package distributions already include an empty
plugins folder.
Relates #21204
This adds support for templating in rank eval requests.
Relates to #20231
Problem: In it's current state the rank-eval request API forces the user to repeat complete queries for each test request. In most use cases the structure of the query to test will be stable with only parameters changing across requests, so this looks like lots of boilerplate json for something that could be expressed in a more concise way.
Uses templating/ ScriptServices to enable users to submit only one test request template and let them only specify template parameters on a per test request basis.
Vagrant tests use a static list of dependencies to upgrade from
and we weren't including 5.0.0 deps in that list. Also when the
list was incorrect we weren't sorting the "current" list so it
was difficult to read.
Also adds 2.4.1 to the list but *doesn't* add 5.0.0 because we
still can't resolve it yet. We still only print an error when
the list is wrong but don't abort the build. We'll abort the build
once we've fixed resolution for 5.0.0 and we can re-add it.
We are upgrading from out of date versions in our tests right now and we
can't fix that because the current versions to upgrade from aren't in
maven central. We'll resolve the resolution issue soon, but for now
let's get the build green.
Since with j`ava-1.8.0-openjdk-1.8.0.111-1.b15.el7_2.x86_64`, the OpenJDK packaged for CentOS and OEL override the default value (`false`) for the JVM option `AssumeMP` and force it to `true` (see [this patch](https://git.centos.org/blob/rpms!!java-1.8.0-openjdk.git/ab03fcc7a277355a837dd4c8500f8f90201ea353/SOURCES!always_assumemp.patch))
Because it is forced to true by default for these packages, the following warning message is printed to the standard output when the Vagrant box has only 1 CPU:
> OpenJDK 64-Bit Server VM warning: If the number of processors is expected to increase from one, then you should configure the number of parallel GC threads appropriately using -XX:ParallelGCThreads=N
This message will then fail the test introduced in #20422 where we check if no entries have been added to the journal after the service has been started.
This commit restore the default value for the `AssumeMP` option for CentOS and OracleServer.
This commit mutes a check on the output of journalctl after the Elasticsearch's systemd service has been started. It expected no entries in the journal but since OpenJDK build 1.8.0_111-b15 the following warning message is printed:
OpenJDK 64-Bit Server VM warning: If the number of processors is expected to increase from one, then you should configure the number of parallel GC threads appropriately using -XX:ParallelGCThreads=N
`LocalDiscovery` is a discovery implementation that uses static in memory maps to keep track of current live nodes. This is used extensively in our tests in order to speed up cluster formation (i.e., shortcut the 3 second ping period used by `ZenDiscovery` by default). This is sad as that mean that most of the test run using a different discovery semantics than what is used in production. Instead of replacing the entire discovery logic, we can use a similar approach to only shortcut the pinging components.
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
Today when parsing a request, Elasticsearch silently ignores incorrect
(including parameters with typos) or unused parameters. This is bad as
it leads to requests having unintended behavior (e.g., if a user hits
the _analyze API and misspell the "tokenizer" then Elasticsearch will
just use the standard analyzer, completely against intentions).
This commit removes lenient URL parameter parsing. The strategy is
simple: when a request is handled and a parameter is touched, we mark it
as such. Before the request is actually executed, we check to ensure
that all parameters have been consumed. If there are remaining
parameters yet to be consumed, we fail the request with a list of the
unconsumed parameters. An exception has to be made for parameters that
format the response (as opposed to controlling the request); for this
case, handlers are able to provide a list of parameters that should be
excluded from tripping the unconsumed parameters check because those
parameters will be used in formatting the response.
Additionally, some inconsistencies between the parameters in the code
and in the docs are corrected.
Relates #20722
this change adds a hard limit to `index.number_of_shard` that prevents
indices from being created that have more than 1024 shards. This is still
a huge limit and can only be changed via settings a system property.
Today when executing the install plugin command without a plugin id, we
end up throwing an NPE because the plugin id is null yet we just keep
going (ultimatley we try to lookup the null plugin id in a set, the
direct cause of the NPE). This commit modifies the install command so
that a missing plugin id is detected and help is provided to the user.
Relates #20660
When testing tribe nodes in an integration test, we should pass the classpath
plugins of the node down to the tribe client nodes. Without this the tribe client
nodes could be prevented from communicating with the tribes.
Today when CLI tools are executed, logging statements can intentionally
or unintentionally be executed when logging is not configured. This
leads to log messages that the status logger is not configured. This
commit reworks logging configuration for CLI tools so that logging is
always configured.
Relates #20575
This PR introduces backward compatibility index tests to test the rolling upgrade process amongst Elasticsearch instances within the same major version. The test executes in three phases. In the first phase, we form a cluster of 2 ES instances on an old version. In the second phase, we keep one of the nodes from the old cluster, kill the other node, but preserve its data directory and start an instance of the current version of ES using the same data directory as the killed instance. In the third phase, we kill the other old version ES instance from the first phase and launch a new instance, using the same data directory as the killed instance. Therefore, during phase 3, we have fully migrated and have all current versions of ES running. In each phase, we run REST tests that index documents and search them, ensuring at each stage that the documents from the previous phase are still there.
Note that because we haven't released a GA yet of 5.0, the tests currently don't start an old version cluster in the first phase. Once GA is released, this will be changed to make the backward compatibility version 5.0, while the current version in the cluster will be 5.x.
automatically between tasks, as we want some of the nodes from
the previous task to continue running in the next task. This
commit enables a cluster configuration setting to not stop
nodes automatically after a task runs, but instead the creator
of the test task must stop the running nodes explicitly in a
cleanup phase.
cluster, we wait for the cluster health to indicate the
necessary nodes have formed a cluster. This check was an
exact value (equality) check. However, if we are trying to
connect the nodes in the cluster to nodes from a previously
formed cluster (of the same name), then we will have more
nodes returned by the cluster health check than the current
task's configured number of nodes. Hence, this check needs
to be a >= check. This commit fixes it.
Today when starting Elasticsearch without a Log4j 2 configuration file,
we end up throwing an array index out of bounds exception. This is
because we are passing no configuration files to Log4j. Instead, we
should throw a useful error message to the user. This commit modifies
the Log4j configuration setup to throw a user exception if no Log4j
configuration files are present in the config directory.
Relates #20493
BATS upgrade tests fails on master branch because it tries to install 2.x versions to upgrade from instead of 5.x versions. And since #18554 we should only test upgrades from 5.0.0-alpha4 versions.
This commit changes the vagrant tests so that it tries to list all the previous releases from version N-1. If nothing is found, it will fetch the current version and will run the upgrade tests with it. It works nicely with the current master 6.0.0-alpha1-SNAPSHOT. Once 5.0.0 is released it should run the test with it.
When uninstalling or upgrading elasticsearch using the RPM package some empty directories remain on the filesystem:
/usr/share/elasticsearch/bin
/usr/share/elasticsearch/lib
/usr/share/elasticsearch/modules
/usr/share/elasticsearch/modules/foo
Having empty directories in modules can prevent elasticsearch to start after an upgrade: the plugins service expects to find a plugin-descriptor.properties file in every sub directory of modules.
This PR cleans things a bit so that these empty directories are removed on upgrade/removal like it was in 2.x.
The Log4j shutdown hack test tests that a hack we have in place to
workaround a bug in Log4j during shutdown is effective. Log4j can use
JMX to control logging levels, but we disable this through the use of a
system property log4j2.disable.jmx (mainly because there is no need for
this feature, but it also means granting additional security
permissions). The bug in Log4j is that during shutdown, it neglects to
check whether or not its usage of JMX is disable and so it attempts to
unregister management beans, leading to a permissions violation. The
test works by attempting to shutdown Log4j and thus triggering the bad
code path. With the Log4j hack in place, we have introduced jar hell so
that its our code running instead of code from the Log4j jar. Our code
correctly checks that the usage of JMX is disabled and thus does not
trip on a permissions violation. The test was a little complicated in
that it attempted to just grant the minimal permissions needed for Log4j
to do its thing, but this can sometimes lead to other unwanted
permissions violations because the permissions put in place are more
restrictive necessary. This commit simplifies this situation by
rewriting the test to only deny Log4j the sole permission needed to
trigger the bug.
Relates #20476
When upgrading elasticsearch using the RPM package, the scripts directory is removed if it's empty but it won't be recreated by the upgraded package. But after that the service won't start because the scripts dir is missing.
Today when setting the logging level via the command-line or an API
call, the expectation is that the logging level should trickle down the
hiearchy to descendant loggers. However, this is not necessarily the
case. For example, if loggers x and x.y are already configured then
setting the logging level on x will not descend to x.y. This is because
the logging config for x.y has already been forked from the logging
config for x. Therefore, we must explicitly descend the hierarchy when
setting the logging level and that is what this commit does.
Relates #20463
This commit introduces a new plugin for file-based unicast hosts
discovery. This allows specifying the unicast hosts participating
in discovery through a `unicast_hosts.txt` file located in the
`config/discovery-file` directory. The plugin will use the hosts
specified in this file as the set of hosts to ping during discovery.
The format of the `unicast_hosts.txt` file is to have one host/port
entry per line. The hosts file is read and parsed every time
discovery makes ping requests, thus a new version of the file that
is published to the config directory will automatically be picked
up.
Closes#20323
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
The plugin command now displays the version of the plugin, which is
compared to a string without the version. This removes the version from
the string.
The evil logger tests rely on external configuration. This configuration
is shared between these tests which means that changing the
configuration for one test can cause an unrelated test to fail. In
particular, removing the appenders on the root logger so that inherited
loggers in one test do not have a console and file appender by default
breaks tests that were expecting the root logger to have these
appenders. This commit separates these configs so that these tests are
not subject to this problem.
Log4j has a bug where on shutdown it ignores that JMX might be disabled;
since it does not respect this on shutdown, it proceeds to attempt to
access JMX leading to a security exception that should have otherwise
not occurred had it respected that JMX is disabled. This commit
intentionally introduces jar hell with the Server class to work around
this bug until a fix is released.
Relates #20389
Previously we would disable console logging in certain circumstances
(for example, if Elasticsearch is not in the foreground, or if
Elasticsearch is in the foreground but an exception was thrown during
bootstrap). This commit makes this handling work with Log4j 2. This will
prevent users from seeing double bootstrap check failure messages.
Relates #20387
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
The 5.x series of Elasticsearch emits a warning if any of the old
logging configuration formats are present. This commit removes that
warning.
Relates #20386
By default, when an exception causes the JVM to terminate, the stack
trace is printed. In the case of failing bootstrap checks, this stack
trace is useless to the user, and might even distract them from seeing
that the bootstrap checks failed for reasons under their control. With
this commit, we cause the stack trace for a failing bootstrap check to
be truncated.
We also modify some methods to not declare that they throw the top level
checked exception type Exception, but instead explicitly declare the
exceptions that they throw. These exceptions are caught and wrapped in a
BootstrapException so that we can percolate only two exception types out
of Bootstrap#init as checked exception, BootstrapException and
NodeValidationException.
Relates #19989
The logging configuration tests write to log files which are deleted at
the end of the test. If these files are not closed, some operating
systems will complain when these deletes are performed. This commit
ensures that the logging system is properly shutdown so that these files
can be properly deleted.
The evil logging tests write to log files which are deleted at the end
of the test. If these files are not closed, some operating systems will
complain when these deletes are performed. This commit ensures that the
logging system is properly shutdown so that these files can be properly
deleted.
This commit expands on the message printed when config files are
preserved when removing a plugin to give the user an indication of the
reason the config files are preserved.
When removing a plugin with a config directory, we preserve the config
directory. This is because the workflow for upgrading a plugin involves
removing and then installing the plugin again and losing the plugin
config in this case would be terrible. This commit causes a message
regarding this to be printed in case the user wants to manually delete
these files.
* master:
Avoid NPE in LoggingListener
Randomly use Netty 3 plugin in some tests
Skip smoke test client on JDK 9
Revert "Don't allow XContentBuilder#writeValue(TimeValue)"
[docs] Remove coming in 2.0.0
Don't allow XContentBuilder#writeValue(TimeValue)
[doc] Remove leftover from CONSOLE conversion
Parameter improvements to Cluster Health API wait for shards (#20223)
Add 2.4.0 to packaging tests list
Docs: clarify scale is applied at origin+offest (#20242)
When Netty 4 was introduced, it was not the default network
implementation. Some tests were constructed to randomly use Netty 4
instead of the default network implementation. When Netty 4 was made the
default implementation, these tests were not updated. Thus, these tests
are randomly choosing between the default network implementation (Netty
4) and Netty 4. This commit updates these tests to reverse the role of
Netty 3 and Netty 4 so that the randomization is choosing between Netty
3 and the default (again, now Netty 4).
Relates #20265
This commit adds an assumption to SmokeTestClientIT tests on JDK 9. The
underlying issue is that Netty attempts to access sun.nio.ch but this
package is not exported from java.base on JDK 9. This throws an uncaught
InaccessibleObjectException causing the test to fail. This assumption
can be removed when Netty 4.1.6 is released as it will include a fix for
this scenario.
Relates #20260
This commit enables CLI tools to have console logging. For the CLI
tools, we skip configuring the logging infrastructure via the config
file, and instead set the level only via a system property.
This commit fixes failing evil logging configuration tests. The test for
resolving multiple configuration files was failing after
9a58fc2348 removed some of the
configuration needed for this test. The solution is revert the removal
of that configuration, but remove additivity from the test logger to
prevent the evil logger tests from failing.
This commit defaults the max local storage nodes to one. The motivation
for this change is that a default value greather than one is dangerous
as users sometimes end up unknowingly starting a second node and start
thinking that they have encountered data loss.
Relates #19964
When compiling many dynamically changing scripts, parameterized
scripts (<https://www.elastic.co/guide/en/elasticsearch/reference/master/modules-scripting-using.html#prefer-params>)
should be preferred. This enforces a limit to the number of scripts that
can be compiled within a minute. A new dynamic setting is added -
`script.max_compilations_per_minute`, which defaults to 15.
If more dynamic scripts are sent, a user will get the following
exception:
```json
{
"error" : {
"root_cause" : [
{
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
],
"type" : "search_phase_execution_exception",
"reason" : "all shards failed",
"phase" : "query",
"grouped" : true,
"failed_shards" : [
{
"shard" : 0,
"index" : "i",
"node" : "a5V1eXcZRYiIk8lecjZ4Jw",
"reason" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
}
],
"caused_by" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
},
"status" : 500
}
```
This also fixes a bug in `ScriptService` where requests being executed
concurrently on a single node could cause a script to be compiled
multiple times (many in the case of a powerful node with many shards)
due to no synchronization between checking the cache and compiling the
script. There is now synchronization so that a script being compiled
will only be compiled once regardless of the number of concurrent
searches on a node.
Relates to #19396
This commit fixes a test bug in
EvilJNANativesTests#testSetMaximumNumberOfThreads. Namely, the test was
not checking whether or not the value from /proc/self/limits was equal
to "unlimited" before attempting to parse as a long. This commit fixes
that error.
Today when we load the Netty plugins, we indirectly cause several Netty
classes to initialize. This is because we attempt to load some classes
by name, and loading these classes is done in a way that triggers a long
chain of class initializers within Netty. We should not do this, this
can lead to log messages before the logger is loader, and it leads to
initialization in cases when the classes would never be needed (for
example, Netty 3 class initialization is never needed if Netty 4 is
used, and vice versa). This commit avoids this early initialization of
these classes by removing the need for the early loading.
Relates #19819
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
* rethrow script compilation exceptions into ingest configuration exceptions
* update readProcessor to rethrow any exception as an ElasticsearchException
Remove `ParseField` constants used for names where there are no deprecated
names and just use the `String` version of the registration method instead.
This is step 2 in cleaning up the plugin interface for extending
search time actions. Aggregations are next.
This is breaking for plugins because those that register a new query should
now implement `SearchPlugin` rather than `onModule(SearchModule)`.
We throw IOException, which is the exception that is going to be thrown in 99% of the cases. A more generic exception can happen, and if it is a runtime one we just let it bubble up as is, otherwise we wrap it into runtime one so that we don't require to catch Exception everywhere, which seems odd.
Also adjusted javadocs for all performRequest methods
The new method accepts the usual parameters (method, endpoint, params, entity and headers) plus a response listener and an async response consumer. Shortcut methods are also added that don't require params, entity and the async response consumer optional.
There are a few relevant api changes as a consequence of the move to async client that affect sync methods:
- Response doesn't implement Closeable anymore, responses don't need to be closed
- performRequest throws Exception rather than just IOException, as that is the the exception that we get from the FutureCallback#failed method in the async http client
- ssl configuration is a bit simpler, one only needs to call setSSLStrategy from a custom HttpClientConfigCallback, that doesn't end up overridng any other default around connection pooling (it used to happen with the sync client and make ssl configuration more complex)
Relates to #19055
The `client/transport` project adds a new jar build project that
pulls in all dependencies and configures all required modules.
Preinstalled modules are:
* transport-netty
* lang-mustache
* reindex
* percolator
The `TransportClient` classes are still in core
while `TransportClient.Builder` has only a protected construcutor
such that users are redirected to use the new `TransportClientBuilder`
from the new jar.
Closes#19412
This change removes the multiple ways that plugins can be added to the
integ test cluster. It also removes the use of the default
configuration, and instead adds a zip configuration to all plugins. This
will enable using project substitutions with plugins, which must be done
with the default configuration.
creation in the REST tests, as we no longer need it due
to index creation now waiting for active shard copies
before returning (by default, it waits for the primary of
each shard, which is the same as ensuring yellow health).
Relates #19450
This commit renames the Netty 3 transport module from transport-netty to
transport-netty3. This is to make room for a Netty 4 transport module,
transport-netty4.
Relates #19439
Currently custom headers that should be passed through rest requests are
registered by depending on the RestController in guice and calling a
registration method. This change moves that registration to a getter for
plugins, and makes the RestController take the set of headers on
construction.
Today `node.mode` and `node.local` serve almost the same purpose, they
are a shortcut for `discovery.type` and `transport.type`. If `node.local: true`
or `node.mode: local` is set elasticsearch will start in _local_ mode which means
only nodes within the same JVM are discovered and a non-network based transport
is used. The _local_ mode it only really used in tests or if nodes are embedded.
For both, embedding and tests explicit configuration via `discovery.type` and `transport.type`
should be preferred.
This change removes all the usage of these settings and by-default doesn't
configure a default transport implemenation since netty is now a module. Yet, to make
the user expericence flawless, plugins or modules can set a `http.type.default` and
`transport.type.default`. Plugins set this via `PluginService#additionalSettings()`
which enforces _set-once_ which prevents node startup if set multiple times. This means
that our distributions will just startup with netty transport since it's packaged as a
module unless `transport.type` or `http.transport.type` is explicitly set.
This change also found a bunch of bugs since several NamedWriteables were not registered if a
transport client is used. Now that we don't rely on the `node.mode` leniency which is inherited
instead of using explicit settings, `TransportClient` uses `AssertingLocalTransport` which detects these problems since it serializes all messages.
Closes#16234
This moves all netty related code into modules/transport-netty the module is build as a zip file as well as a JAR to serve as a dependency for transport client. For the time being this is required otherwise we have no network based impl. for transport client users. This might be subject to change given that we move forward http client.
Some tests still start http implicitly or miss configuring the transport clients correctly.
This commit fixes all remaining tests and adds a depdenceny to `transport-netty` from
`qa/smoke-test-http` and `modules/reindex` since they need an http server running on the nodes.
This also moves all required permissions for netty into it's module and out of core.
The callback replaces the ability to fully replace the http client instance. By doing that, one used to lose any default that the RestClient had set for the underlying http client. Given that you'd usually override one or two things only, like a couple of timeout values, the ssl factory or the default credentials providers, it is not uder friendly if by doing that users end up replacing the whole http client instance and lose any default set by us.
This change adds a createComponents() method to Plugin implementations
which they can use to return already constructed componenents/services.
Eventually this should be just services ("components" don't really do
anything), but for now it allows any object so that preconstructed
instances by plugins can still be bound to guice. Over time we should
add basic services as arguments to this method, but for now I have left
it empty so as to not presume what is a necessary service.
this commit moves the most of the http related integ tests out into it's own
`qa/smoke-test-http` project where most of the test can run against the external cluster.
This commit migrates the Vagrant box for Fedora for the packaging tests
from Fedora 22 to Fedora 24 as Fedora 22 reached end-of-line upon the
release of Fedora 24.
Relates #19308
The top-level class Throwable represents all errors and exceptions in
Java. This hierarchy is divided into Error and Exception, the former
being serious problems that applications should not try to catch and the
latter representing exceptional conditions that an application might
want to catch and handle. This commit renames
org.elasticsearch.cli.UserError to org.elasticsearch.UserException to
make its name consistent with where it falls in this hierarchy.
Relates #19254
Node IDs are currently randomly generated during node startup. That means they change every time the node is restarted. While this doesn't matter for ES proper, it makes it hard for external services to track nodes. Another, more minor, side effect is that indexing the output of, say, the node stats API results in creating new fields due to node ID being used as keys.
The first approach I considered was to use the node's published address as the base for the id. We already [treat nodes with the same address as the same](https://github.com/elastic/elasticsearch/blob/master/core/src/main/java/org/elasticsearch/discovery/zen/NodeJoinController.java#L387) so this is a simple change (see [here](https://github.com/elastic/elasticsearch/compare/master...bleskes:node_persistent_id_based_on_address)). While this is simple and it works for probably most cases, it is not perfect. For example, if after a node restart, the node is not able to bind to the same port (because it's not yet freed by the OS), it will cause the node to still change identity. Also in environments where the host IP can change due to a host restart, identity will not be the same.
Due to those limitation, I opted to go with a different approach where the node id will be persisted in the node's data folder. This has the upside of connecting the id to the nodes data. It also means that the host can be adapted in any way (replace network cards, attach storage to a new VM). I
It does however also have downsides - we now run the risk of two nodes having the same id, if someone copies clones a data folder from one node to another. To mitigate this I changed the semantics of the protection against multiple nodes with the same address to be stricter - it will now reject the incoming join if a node exists with the same id but a different address. Note that if the existing node doesn't respond to pings (i.e., it's not alive) it will be removed and the new node will be accepted when it tries another join.
Last, and most importantly, this change requires that *all* nodes persist data to disk. This is a change from current behavior where only data & master nodes store local files. This is the main reason for marking this PR as breaking.
Other less important notes:
- DummyTransportAddress is removed as we need a unique network address per node. Use `LocalTransportAddress.buildUnique()` instead.
- I renamed `node.add_lid_to_custom_path` to `node.add_lock_id_to_custom_path` to avoid confusion with the node ID which is now part of the `NodeEnvironment` logic.
- I removed the `version` paramater from `MetaDataStateFormat#write` , it wasn't really used and was just in the way :)
- TribeNodes are special in the sense that they do start multiple sub-nodes (previously known as client nodes). Those sub-nodes do not store local files but derive their ID from the parent node id, so they are generated consistently.
Today throughout the codebase, catch throwable is used with reckless
abandon. This is dangerous because the throwable could be a fatal
virtual machine error resulting from an internal error in the JVM, or an
out of memory error or a stack overflow error that leaves the virtual
machine in an unstable and unpredictable state. This commit removes
catch throwable from the codebase and removes the temptation to use it
by modifying listener APIs to receive instances of Exception instead of
the top-level Throwable.
Relates #19231
As discussed at https://github.com/elastic/elasticsearch-cloud-azure/issues/91#issuecomment-229113595, we know that the current `discovery-azure` plugin only works with Azure Classic VMs / Services (which is somehow Legacy now).
The proposal here is to rename `discovery-azure` to `discovery-azure-classic` in case some users are using it.
And deprecate it for 5.0.
Closes#19144.
As some plugins are becoming big now, it is hard for the user to know, if the plugin
is being downloaded or just nothing happens.
This commit adds a progress bar during download, which can be disabled by using the `-q`
parameter.
In addition this updates to jimfs 1.1, which allows us to test the batch mode, as adding
security policies are now supported due to having jimfs:// protocol support in URL stream
handlers.
This commit adds randomization for the packaging upgrade test. In
particular, we extract a list of the released version of Elasticsearch
from Maven Central and randomize the selection of the version to upgrade
from. The randomization is repeatable, and supports the tests.seed
property. Specific versions can be tested by setting the property
tests.packaging.upgrade.from.versions.
Relates #19033
Registering a script engine or native scripts still uses Guice today
and is much more complicated than needed. This change moves to a pull
based model where script plugins have to implement a dedicated interface
`ScriptPlugin` and defines simple getter returning instances rather than
classes.
The database files have been doubled in size compared to the previous files being used.
For this reason the database files are now gzip compressed, which required using
`GZIPInputStream` when loading database files.
Previously Elasticsearch used $DATA_DIR/$CLUSTER_NAME/nodes for the path
where data is stored, this commit changes that to be $DATA_DIR/nodes.
On startup, if the old folder structure is detected it will be used.
This behavior will be removed in Elasticsearch 6.0
Resolves#17810
Folded grok processor into ingest-common module.
The rest tests have been moved to ingest-common module as well, because these tests don't run in the rest-api-spec module but in the distribution:integ-test-zip module
and adding a test plugin there felt just wrong to me. I think this is ok. I left a tiny ingest rest test behind in that tests with an empty pipeline.
Removed messy tests, these tests were already covered in the rest tests
Added ingest test plugin in test infra so that each module testing integration with ingest doesn't need write its own plugin
Moved reindex ingest tests to qa module
Closes#18490
We have 3 evil tests for jarhell. They have been failing in java 9
because of how evil they are. The first checks the leniency we add for
jarhell in the jdk itself. This is unecessary, since if the leniency
wasn't there, we would already be failing all jarhell checks. The second
is checking the compile version is compatible with the jdk. This is
simpler since we don't need to fake the java version: we know 1.7 should
be compatibile with both java 8 and 9, so we can use that as a constant.
Finally the last test checks if the java version system property is
broken. This is simply something we should not check, we have to trust
that java specifies it correctly, and again, if it was broken, all
jarhell checks would be broken.
Lucene SuppressForbidden is marked lucene.internal and should not be
used outside of Lucene. This commit removes the uses of this class
within Elasticsearch. Instead,
org.elasticsearch.common.SuppressForbidden should be used, which was
already the case in most places.
This commit fixes an issue with the plugins directory being a symbolic
link. Namely, the install plugins command attempts to always create the
plugins directory just in case it does not exist. The JDK method used
here guarantees that the directory is created, and an exception is not
thrown if the directory could not be created because it already
exists. The problem is that this JDK method does not respect symlinks so
its internal existence checks fails, it proceeds to attempt to create
the directory, but the directory creation fails because the symlink
exists. This is documented as being not an issue. We work around this by
checking if there is a symlink where we expect the plugins directory to
be, and only attempt to create if not. We add a unit test that plugin
installation to a symlinked plugins directory works as expected.
This commit removes the ability to specify a custom plugins
path. Instead, the plugins path will always be a subdirectory called
"plugins" off of the home directory.
- now you can specify a list of grok patterns to match your field with
and the first one to successfully match wins.
- only non-null captures will be inserted into your matched document.
Fixes#17903.
This removes the ScriptMode class entirely, which was an enum with two
options (ON and OFF) which essentially boiled down to true and false.
Now the boolean values are used instead.
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
This commit modifies the packaging tests to account for the fact that
rpm behaves differently with respect to preserving directories marked as
"CONFIG | NOREPLACE" on older versions versus newer versions. Older
versions will leave the directory as-is while newer versions will append
the suffix ".rpmsave" to the directory name.
Relates #18216
This change makes the vagrant tasks extend LoggedExec, so that the
entire vagrant output can be dumped on failure (and completely logged
when using --info). It should help for debugging issues like #18122.
Exit with proper exit code (1) and an error message if elasticsearch
executable binary does not exists or has insufficient permissions to
execute.
Squashed commit of the following:
commit 9768d316303418ba4f9c96d3f87c376048a1b1bc
Author: Puru <tuladharpuru@gmail.com>
Date: Fri Apr 22 23:26:47 2016 +0545
Fixed ES_HOME typo
commit 79a2b0394297f8b02b6f71b71ba35ff79f1a684e
Author: Puru <tuladharpuru@gmail.com>
Date: Sun Apr 10 11:00:24 2016 +0545
Improve elasticsearch startup script test
Added improvement as per conversation in https://github.com/elastic/elasticsearch/pull/17082#issuecomment-206459613
commit 7be38e1fefd4baa6ccdbdc14745c00f6dc052e0c
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 13:23:52 2016 +0545
Add elasticsearch startup script test
The test ensures that elasticsearch startup script exists and is executable.
commit d10eed5c08260fa9c158a4487bbb3103a8d867ed
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 12:30:25 2016 +0545
Fixed IF syntax and failure message
commit 6dc66f616545572485b4d43bee05a4cbbf1bed72
Author: Puru <tuladharpuru@gmail.com>
Date: Sat Mar 12 11:08:11 2016 +0545
Fix exit code
Exit with proper exit code (1) and an error message if elasticsearch executable binary does not exists or has insufficient permissions to execute.
This changes our packaging to be explicit about the permissions of files
and directories in the tar.gz, rpm, and deb packages. This is to protect
against a user having an incorrectly set umask when installing.
Additionally, plugins that are installed now have their permissions set
by the plugin installation so that plugins that may have been packaged
with incorrect permissions are secured.
Resolves#17634
* `rename` processor, renamed `to` to `target_field`
* `date` processor, renamed `match_field` to `field` and renamed `match_formats` to `formats`
* `geoip` processor, renamed `source_field` to `field` and renamed `fields` to `properties`
* `attachment` processor, renamed `source_field` to `field` and renamed `fields` to `properties`
Closes#17835
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
Luca Cavanna
Simon Willnauer
Boaz Leskes
Jay Modi
Jason Tedor
Christoph Büscher
Yannick Welsch
Michael Basnight
Alexander Reelsen
Ryan Ernst
Nik Everett
Tim Brooks
Martijn van Groningen
Tal Levy
Lee Hinman
Ali Beyad
Guillaume Le Floch
James Baiera
Lee Hinman
Colin Goodheart-Smithe
Jack Conradson
Jim Ferenczi
Adrien Grand
Areek Zillur
Max Goodridge
javanna
jaymode
Chris Buonocore
Igor Motov
Isabel Drost-Fromm
Isabel Drost-Fromm
Simon Willnauer
Tanguy Leroux
David Roberts
Dimitrios Liappis
David Pilato
Clinton Gormley
Britta Weber
GUILLAUME GROSSETIE
Robert Muir
Robert Muir
Gabriel Moskovicz