In case of a disjunction query with both range and term based clauses and
msm specified, the query analyzer needs to also reduce the msn if a range
based clause for the same field is encountered. This did not happen.
Instead of fixing this bug the logic has been simplified to just set a
percolator query's msm to 1 if a disjunction contains range clauses and
msm on disjunction has been specified. The logic would otherwise just get
to complex and the performance gain isn't that much for this kind of
percolator queries.
In case a percolator query has clauses that have duplicate terms or ranges then
for disjunction clauses with a minimum should match the query extraction of the
clause with the lowest msm should be used and for conjunction queries query
extractions wiht duplicate terms/ranges the msn should be ignored. If this
is not done then percolator queries that should match never match.
Example percolator query: value1 OR value2 OR value2 OR value3 OR value3 OR value3 OR value4 OR value5 (msm set to 3)
In the above example query the extracted msm would be 3
Example document1: value1 value2 value3
With the msm and extracted terms this would match and is expected behaviour
Example document2: value3
This document should match too (value3 appears in 3 clauses), but with msm set to 3 and the fact
that fact that only distinct values are indexed in extracted terms field this document would
Also added another random duel test.
Closes#29393
* Remove copy-pasted code
We had two instances of copy-pasted code with a bad license from
another website. The code was doing something rather simple, and
that functionality already exists within junit. This PR simply leverages
the junit functionality.
`BaseRandomBinaryDocValuesRangeQueryTestCase.testRandomBig` should only run with
nightly tests. It doesn't make sense to make it part of every test run.
`UUIDTests` had a slow test for compression, which I made a bit faster by
decreasing the number of indexed docs.
This change tries to simplify the extraction logic of boolean queries by
concentrating the logic into two methods: one that merges results for
conjunctions, and another one for disjunctions. Other concerns, like the impact
of prohibited clauses or how an `UnsupportedQueryException` should be treated
are applied on top of those two methods.
This is mostly a code reorganization, it doesn't change the result of query
extraction except in the case that a query both has required clauses and a
minimum number of `SHOULD` clauses that is greater than 1, which we now
rewrite into a pure conjunction. For instance `(+A B C)~1` is rewritten into
`(+A +(B C))` prior to extraction.
This commit fixes the formatting of the values in the composite
aggregation response. `date` fields should return timestamp as longs
when used in a `terms` source and `ip` fields should always be formatted as strings.
This commit also fixes the parsing of the `after` key for these field types.
Finally, this commit disables the index optimization for the `ip` field and any source that provides a `missing` value.
This commit simplifies the invocations to
Translog#closeOnTragicEvent. This method already catches all possible
exceptions and suppresses the non-AlreadyClosedExceptions into the
exception that triggered the invocation. Therefore, there is no need for
callers to do this same logic (which would never execute).
* Move Streams.copy into elasticsearch-core and make a multi-release jar
This moves the method `Streams.copy(InputStream in, OutputStream out)` into the
`elasticsearch-core` project (inside the `o.e.core.internal.io` package). It
also makes this class into a multi-release class where the Java 9 equivalent
uses `InputStream#transferTo`.
This is a followup from
https://github.com/elastic/elasticsearch/pull/29300#discussion_r178147495
* Move ObjectParser into the x-content lib
This moves `ObjectParser`, `AbstractObjectParser`, and
`ConstructingObjectParser` into the libs/x-content dependency. This decoupling
allows them to be used for parsing for projects that don't want to depend on the
entire Elasticsearch jar.
Relates to #28504
* Move Tuple into elasticsearch-core
This allows us to use Tuple from other projects that don't want to rely on the
entire Elasticsearch jar.
I have also added very simple tests, since there were none.
Relates tangentially to #28504
Today we close the translog write tragically if we experience any I/O
exception on a write. These tragic closes lead to use closing the
translog and failing the engine. Yet, there is one case that is missed
which is when we touch the write channel during a read (checking if
reading from the writer would put us past what has been flushed). This
commit addresses this by closing the writer tragically if we encounter
an I/O exception on the write channel while reading. This becomes
interesting when we consider that this method is invoked from the engine
through the translog as part of getting a document from the
translog. This means we have to consider closing the translog here as
well which will cascade up into us finally failing the engine.
Note that there is no semantic change to, for example, primary/replica
resync and recovery. These actions will take a snapshot of the translog
which syncs the translog to disk. If an I/O exception occurs during the
sync we already close the writer tragically and once we have synced we
do not ever read past the position that was synced while taking the
snapshot.
Currently the ranking evaluation API doesn't support many of the
standard parameters of the search API. Some of these make sense, like
adding support for the common indices options parameters, which this
change adds.
* Fixes query_string query equals timezone check
This change fixes a bug where two `QueryStringQueryBuilder`s were found
to be equal if they had the same timezone set even if the query string
in the builders were different
Closes#29403
* Adds mutate function to QueryStringQueryBuilderTests
* iter
This change moves the -ea and -esa options that enable assertions for
test nodes before the cluster-specific JVM arguments on the Java command
line. This opens up the possibility for the cluster-specific JVM
arguments to disable assertions for one particular package or class,
which can be useful in BWC testing where incorrect assertions cannot be
removed from released versions of the product.
Fixes instances of
- Equals methods without type check
- Equals methods where the field of `this` was compared to the same
field of `this` instead of the `that` object that is compared to
This commit adds a new fixture that emulates an
Azure Storage service in order to improve the
existing integration tests. This is very similar
to what has been made for Google Cloud Storage
in #28788 and for Amazon S3 in #29296, and it
would have helped a lot to catch bugs like #22534.
I found the following bugs:
- The 6.0 logic for conjunctions didn't work when there were only `match_all`
queries in MUST/FILTER clauses as they didn't propagate the `matchAllDocs`
flag.
- Some queries still had the same issue as `BooleanQuery` used to have with
duplicate terms (see #28353), eg. `MultiPhraseQuery`.
Closes#29376
The repository-gcs unit tests rely on the GoogleCloudStorageTestServer
but it would be better if they rely on a mocked Storage client instead.
That would also help to extract the GoogleCloudStorageFixture and the
GoogleCloudStorageTestServer classes in a QA third party project.
Closes#28960
From 7.0 on, using `delimited_payload_filter` should throw an error.
It was deprecated in 6.2 in favour of `delimited_payload` (#26625).
Relates to #27704
Since #26542 the NodeVersionAllocationDecider tries to explain its NO decisions
as follows:
... may not support codecs or postings formats for a newer Lucene version
However, this message often appears during a rolling upgrade, and experience
has shown that it seems to cause more confusion and worry than it needs to.
This change fixes that by removing the explanation again, reducing the message
to a statement of fact about the respective nodes' versions.
Additionally, the same wording was used for version incompatibilities when
allocating a primary (vs its previous location) and a replica (vs its primary).
This change separates these two cases so they can have separate, clearer
wording.
Fixes#29228
This commit adds the S3BlobStoreRepositoryTests class that extends the
base testing class for S3. It also removes some usage of socket servers
that emulate socket connections in unit tests. It was added to trigger
security exceptions, but this won't be needed anymore since #29296
is merged.
This change fixes the handling of the `quote_field_suffix` option on `query_string`
query. The expansion was not applied to default fields query.
Closes#29324
This commit adds a YAML integration test for the repository-url module
that uses a fixture to test URL based repositories on both http:// and
file:// prefixes.
`action.master.force_local` was only ever used internally and never documented. It was one of those settings that were
automatically added to a tribe node, to make sure that cluster state read operations would work locally rather than failing when trying to forward the request to the master (as the tribe node never had a master).
Given that we recently removed the tribe node, we can also remove this setting.
Today when you input a byte size setting that is out of bounds for the
setting, you get an error message that indicates the maximum value of
the setting. The problem is that because we use ByteSize#toString, we
end up with a representation of the value that does not really tell you
what the bound is. For example, if the bound is 2^31 - 1 bytes, the
output would be 1.9gb which does not really tell you want the limit as
there are many byte size values that we format to the same 1.9gb with
ByteSize#toString. We have a method ByteSize#getStringRep that uses the
input units to the value as the output units for the string
representation, so we end up with no loss if we use this to report the
bound. This commit does this.
Before doing any kind of validation on a new mapping, we should first do the multi-type validation in
order to provide better error messages. For #29313, this means that the exception message will be
Rejecting mapping update to [range_index_new] as the final mapping would have more than 1 type:
[_doc, mytype]
instead of
[expected_attendees] is defined as an object in mapping [mytype] but this name is already used for
a field in other types
Today we have a silent batch mode in the install plugin command when
standard input is closed or there is no tty. It appears that
historically this was useful when running tests where we want to accept
plugin permissions without having to acknowledge them. Now that we have
an explicit batch mode flag, this use-case is removed. The motivation
for removing this now is that there is another place where silent batch
mode arises and that is when a user attempts to install a plugin inside
a Docker container without keeping standard input open and attaching a
tty. In this case, the install plugin command will treat the situation
as a silent batch mode and therefore the user will never have the chance
to acknowledge the additional permissions required by a plugin. This
commit removes this silent batch mode in favor of using the --batch flag
when running tests and requiring the user to take explicit action to
acknowledge the additional permissions (either by leaving standard input
open and attaching a tty, or by passing the --batch flags themselves).
Note that with this change the user will now see a null pointer
exception when they try to install a plugin in a Docker container
without keeping standard input open and attaching a tty. This will be
addressed in an immediate follow-up, but because the implications of
that change are larger, they should be handled separately from this one.
Today we report thread pool info using a common object. This means that
we use a shared set of terminology that is not consistent with the
terminology used to the configure thread pools. This holds in particular
for the minimum and maximum number of threads in the thread pool where
we use the following terminology:
thread pool info | fixed | scaling
min core size
max max size
A previous change addressed this for the nodes info API. This commit
changes the display of thread pool info in the cat thread pool API too
to be dependent on the type of the thread pool so that we can align the
terminology in the output of thread pool info with the terminology used
to configure a thread pool.
Today we reply on `IndexWriter#hasDeletions` to check if an index
contains "update" operations. However, this check considers both deletes
and updates. This commit replaces that check by tracking and checking
Lucene operations explicitly. This would provide us stronger assertions.
Correctly setup classpath/dependencies and fix checkstyle task that was partly broken because delayed setup of Java9 sourcesets. This also cleans packaging of META-INF. It also prepares forbiddenapis 2.6 upgrade
relates #29292
This improves the way similarities are plugged in in order to:
- reject the classic similarity on 7.x indices and emit a deprecation
warning otherwise
- reject unkwown parameters on 7.x indices and emit a deprecation
warning otherwise
Even though this breaks the plugin API, I'd like to backport to 7.x so
that users can get deprecation warnings when they are doing something
that will become unsupported in the future.
Closes#23208Closes#29035
Martijn van Groningen
tomcallahan
Lisa Cawley
Adrien Grand
Jim Ferenczi
yangyang.liu
Jason Tedor
Christoph Büscher
Lee Hinman
Christoph Büscher
Van0SS
Tanguy Leroux
Colin Goodheart-Smithe
David Roberts
Menno Oudshoorn
David Turner
Alan Woodward
Igor Motov
Luca Cavanna
Stéphane Campinas
Yannick Welsch
Nhat Nguyen
Uwe Schindler
Johnny Marnell