So the issue here is that we want to avoid setting vm.max_map_count if
it is already equal to the desired value (the bootstrap check requires
262144). The reason we want to avoid this is because in some use-cases
using sysctl to set this will fail. In this case, we want to enable
users to set this value externally and then allow that to cause using
sysctl to set the value to be skipped so that cases where using sysctl
will fail to no longer fail.
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
The package installation relies on java being in the path. If java is
not in the path, the tests fail at post-install time. This commit adds a
pre-install check to validate that java exists, and if it fails, the
package is never installed, and thus keeps a system clean, rather than
aborting at post-install and leaving behind a mess.
Closes#29665
Although the master branch does not affect by #31482, it's helpful to
have BWC tests that verify the peer recovery with a synced-flush index.
This commit adds the bwc tests from #31506 to the master branch.
Relates #31482
Relates #31506
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
This change moves tests in `smoke-test-rank-eval-with-mustache` into the main
ranking evaluation module by declaring that the integration testing cluster
requires the `lang-mustache` plugin. This avoids having to maintain the qa
project for only one basic test suite.
This commit modifies the Sys V init startup scripts to only modify
vm.max_map_count if needed. In this case, needed means that the current
value is less than our default value of 262144 maps.
If you run `./gradlew -p qa bwcTest -Dtests.distribution=zip` then we
need to resolve older versions of the default distribution. Since those
aren't available in maven central, we need add the elastic maven repo to
the project.
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
With #30490 we have introduced a new way to provide request options
whenever sending a request using the high-level REST client. Before you
could provide headers as the last argument varargs of each API method,
now you can provide `RequestOptions` that in the future will allow to
provide more options which can be specified per request.
This commit deprecates all of the client methods that accept a `Header`
varargs argument in favour of new methods that accept `RequestOptions`
instead. For some API we don't even go through deprecation given that
they were not released since they were added, hence in that case we can
just move them to the new method.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
When subprocesses are started with ProcessBuilder, they're forked by the
java process directly rather than from a shell, which can be surprising
for our use case here in the packaging tests which is similar to
scripting.
This commit changes the tests to run their subprocess commands in a
shell, using the bash -c <script> syntax for commands on linux and using
the powershell.exe -Command <script> syntax for commands on windows.
This syntax on windows is essentially what the tests were already doing.
Ports the first couple tests for archive distributions from the old bats
project to the new java project that includes windows platforms,
consolidating them into one test method that tests that the
distributions can be extracted and their contents verified. Includes the
zip distributions which were not tested in the bats project.
A rolling upgrade from oss Elasticsearch to the default distribution of
Elasticsearch is significantly different than a full cluster restart to
install a plugin and is again different from starting a new cluster with
xpack installed. So this adds some basic tests to make sure that the
rolling upgrade that enables xpack works at all.
This also removes some unused imports from the tests that I modified in
PR #30728. I didn't mean to leave them.
Adding headers rather than setting them all at once seems more
user-friendly and we already do it in a similar way for parameters
(see Request#addParameter).
Switches the rolling upgrade tests from upgrading two nodes to upgrading
three nodes which is much more realistic and much better able to find
unexpected bugs. It upgrades the nodes one at a time and runs tests
between each upgrade. As such this now has four test runs:
1. Old
2. One third upgraded
3. Two thirds upgraded
4. Upgraded
It sets system properties so the tests can figure out which stage they
are in. It reuses the same yml tests for the "one third" and "two
thirds" cases because they are *almost* the same case.
This rewrites the yml-based indexing tests to be Java based because the
yml-based tests can't handle different expected values for the counts.
And the indexing tests need that when they are run twice.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the the old requests. This
changes many calls in the `qa` projects to use the new version.
This configures all `qa` projects to use the distribution contained in
the `tests.distribution` system property if it is set. The goal is to
create a simple way to run tests against the default distribution which
has x-pack basic features enabled while not forcing these tests on all
contributors. You run these tests by doing something like:
```
./gradlew -p qa -Dtests.distribution=zip check
```
or
```
./gradlew -p qa -Dtests.distribution=zip bwcTest
```
x-pack basic *shouldn't* get in the way of any of these tests but
nothing is ever perfect so this we have to disable a few when running
with the zip distribution.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
Currently the ranking evaluation API accepts the full query syntax for
the queries specified in the evaluation set and executes them via multi
search. This potentially runs costly aggregations and suggestions too.
This change adds checks that forbid using aggregations, suggesters,
highlighters and the explain and profile options in the queries that are
run as part of the ranking evaluation since they are irrelevent in the
context of this API.
This folds the `:qa:smoke-test-reindex-with-all-modules` project into
`:modules:reindex` by declaring the reindex's integration testing
cluster requires the `parent-join` and `lang-painless` plugins and then
moving all of the integration tests that depended on parent-join and
painless into reindex.
It saves us one cluster start up during the build at the cost of a
little of the reindex module's "purity". Since the reindex module *does*
have unit tests that test scripting without painless I'm fairly ok with
that.
Today when processing a request for a URL path for which we can not find
a handler we send back a plain-text response. Yet, we have the accept
header in our hand and can respect the accepted media type of the
request. This commit addresses this.
This commit adds setting the homedir for the elasticsearch user to the
adduser command in the packaging preinstall script. While the
elasticsearch user is a system user, it is sometimes conventient to have
an existing homedir (even if it is not writeable). For example, running
cron as the elasticsearch user will try to change dir to the homedir.
closes#14453
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
Systemd overrides should happen through /etc/systemd/system, not
directly editing the service file. This commit removes marking the
service file as configuration for rpm and deb packages.
Many tests are added with a version check so that they do not run against a
version that doesn't have the feature yet. Master is 7.0, so all tests that
do not run against 6.0+ can be removed and the version check can be removed
on all tests that always run on 6.0+.
[test] add java packaging test project
Adds a project for building and running packaging tests written in java
for portability. The vagrant tasks use jars on the packagingTest
configuration, which are built in the same project. No tests are added
yet.
Corresponding changes are not made to :x-pack:qa:vagrant because the
java packaging tests will all be consolidated into one project.
For #26741
This folds the `:qa:reindex-from-old` project into the `:modules:reindex`
project. This should speed up the build marginally by removing a single
clsuter start up at the cost of having to wait for old versions of
Elasticsearch to start up when checking reindex's integration tests.
Those don't take that long so this feels worth it.
This commit moves the repository-s3 fixture test added in #29296 in a
new `repository-s3/qa/amazon-s3` project. This new project allows the
REST integration tests to be executed using the real S3 service when
all the required environment variables are provided. When no env var
is provided, then the tests are executed using the fixture added
in #29296.
The REST tests located at the `repository-s3`plugin project now only
verify that the plugin is correctly loaded.
The REST tests have been adapted to allow a bucket name and a base
path to be specified as env vars. This way it is possible to run the tests
with different base paths (could be anything, like a CI job name or a
branch name) without multiplicating buckets.
Related to #29349
Add the oss tar distribution to the packaging test plugin. Test the oss
tar distribution in the core packaging tests, and the non-oss tar
distribution in the x-pack packaging tests.
The packaging tests for Debian based distro is loooking
for docs in /usr/share/elasticsearch, but it should be
/usr/share/elasticsearch-oss for the oss package.
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
This commit moves the checks on JAVAX_HOME (where X is the java version
number) existing to the end of gradle's configuration phase, and based
on whether the tasks needing the java home are configured to execute.
relates #29519
The test was using a parameter on GET /_cluster/health that older nodes
do not understand. Yet, we do no even need to make this call here, we
can use ensure green for the index.
This test is failing because of an addition of a call to GET
/_cluster/health with the parameter wait_for_no_initializing_shards set
to true. As older versions of Elasticsearch do not understand this
parameter, this request fails and the test fails. This commit marks this
test as awaiting a fix.
Some build tasks require older JDKs. For example, the BWC build tasks
for older versions of Elasticsearch require older JDKs. It is onerous to
require these be configured when merely compiling Elasticsearch, the
requirement that they be strictly set to appropriate values should only
be enforced if these tasks are going to be executed. To address this, we
lazy configure these tasks.
Today we have JAVA_HOME for the compiler Java home and RUNTIME_JAVA_HOME
for the test Java home. However, when we compile BWC nodes and run them,
neither of these Java homes might be the version that was suitable for
that BWC node (e.g., 5.6 requires JDK 8 to compile and to run). This
commit adds support for the environment variables JAVA\d+_HOME and uses
the appropriate Java home based on the version of the node being
started. We even do this for reindex-from-old which requires JDK 7 for
these very old nodes. Note that these environment variables are not
required if not running BWC tests, and they are strictly required if
running BWC tests.
Some features have been deprecated since `6.0` like the `_parent` field or the
ability to have multiple types per index. This allows to remove quite some
code, which in-turn will hopefully make it easier to proceed with the removal
of types.
I found the following bugs:
- The 6.0 logic for conjunctions didn't work when there were only `match_all`
queries in MUST/FILTER clauses as they didn't propagate the `matchAllDocs`
flag.
- Some queries still had the same issue as `BooleanQuery` used to have with
duplicate terms (see #28353), eg. `MultiPhraseQuery`.
Closes#29376
Today we have a silent batch mode in the install plugin command when
standard input is closed or there is no tty. It appears that
historically this was useful when running tests where we want to accept
plugin permissions without having to acknowledge them. Now that we have
an explicit batch mode flag, this use-case is removed. The motivation
for removing this now is that there is another place where silent batch
mode arises and that is when a user attempts to install a plugin inside
a Docker container without keeping standard input open and attaching a
tty. In this case, the install plugin command will treat the situation
as a silent batch mode and therefore the user will never have the chance
to acknowledge the additional permissions required by a plugin. This
commit removes this silent batch mode in favor of using the --batch flag
when running tests and requiring the user to take explicit action to
acknowledge the additional permissions (either by leaving standard input
open and attaching a tty, or by passing the --batch flags themselves).
Note that with this change the user will now see a null pointer
exception when they try to install a plugin in a Docker container
without keeping standard input open and attaching a tty. This will be
addressed in an immediate follow-up, but because the implications of
that change are larger, they should be handled separately from this one.
The vagrant test plugin adds tasks for the groovy packaging tests,
which run after the bats packaging test tasks.Rename the 'bats'
configuration to 'packaging' and remove the option to inherit
archives from this configuration.
I did a little digging. It looks like IOException is thrown when the other
side closes its connection while we're waiting on our buffer to fill up. We
totally expect that in this test. It feels to me like we should throw a
`ConnectionClosedException` but upstream does not agree:
https://issues.apache.org/jira/browse/HTTPASYNC-134
While we *could* catch the exception and transform it ourselves that
seems like a bigger change than is merited at this point.
Closes#29136
Currently we store the indices specified in the request URL together with all
the other ranking evaluation specification in RankEvalSpec. This is not ideal
since e.g. the indices are not rendered to xContent and so cannot be parsed
back. Instead we should keep them in RankEvalRequest.
This commit (which will be reverted soon) adds logging on the output of
starting Wildfly. This is needed to debug an issue with Wildfly not
starting in CI.
* Decouple XContentBuilder from BytesReference
This commit removes all mentions of `BytesReference` from `XContentBuilder`.
This is needed so that we can completely decouple the XContent code and move it
into its own dependency.
While this change appears large, it is due to two main changes, moving
`.bytes()` and `.string()` out of XContentBuilder itself into static methods
`BytesReference.bytes` and `Strings.toString` respectively. The rest of the
change is code reacting to these changes (the majority of it in tests).
Relates to #28504
I have long wanted an actual test that dying with dignity works. It is
tricky because if dying with dignity works, it means the test JVM dies
which is usually an abnormal condition. And anyway, how does one force a
fatal error to be thrown. I was motivated to investigate this again by
the fact that I missed a backport to one branch leading to an issue
where Elasticsearch would not successfully die with dignity. And now we
have a solution: we install a plugin that throws an out of memory error
when it receives a request. We hack the standalone test infrastructure
to prevent this from failing the test. To do this, we bypass the
security manager and remove the PID file for the node; this tricks the
test infrastructure into thinking that it does not need to stop the
node. We also bypass seccomp so that we can fork jps to make sure that
Elasticsearch really died. And to be extra paranoid, we parse the logs
of the dead Elasticsearch process to make sure it died with
dignity. Never forget.
This commit removes the ability to specify that a plugin requires the
keystore and instead creates the keystore on package installation or
when Elasticsearch is started for the first time. The reason that we opt
to create the keystore on package installation is to ensure that the
keystore has the correct permissions (the package installation scripts
run as root as opposed to Elasticsearch running as the elasticsearch
user) and to enable removing the keystore on package removal if the
keystore is not modified.
This commit makes the controller spawner also look under modules. It
also fixes a bug in module security policy loading where the module is a
meta plugin.
Applying the rest test gradle plugin already uses the zip distribution
by default, so specifying it explicitly is not necessary. These are
leftovers from before zip was the default for rest tests.
Add support version and version_type in ingest pipelines
Add support for setting document version and version type in set
processor of an ingest pipeline.
Nodes are reusing task ids after restart. So in some rare circumstances
the same task id might be assigned to the reindexing task stored by the
old cluster and the new task that is trying to retrieve the task
results. As a result, the get task request can timeout waiting on
itself. Since we already waited for the task to finish before restarting
the cluster, waiting for the task here doesn't make any sense to start
with.
Fixes#28732
* Remove log4j dependency from elasticsearch-core
This removes the log4j dependency from our elasticsearch-core project. It was
originally necessary only for our jar classpath checking. It is now replaced by
a `Consumer<String>` so that the es-core dependency doesn't have external
dependencies.
The parts of #28191 which were moved in conjunction (like `ESLoggerFactory` and
`Loggers`) have been moved back where appropriate, since they are not required
in the core jar.
This is tangentially related to #28504
* Add javadocs for `output` parameter
* Change @code to @link
Previously a user could set a custom config path to a relative directory
using ES_PATH_CONF. In a previous change related to enabling GC logging
by default, we forced the working directory for Elasticsearch to be
ES_HOME. This had the impact of causing all relative paths to be
relative to ES_HOME, against the intent of the user. This commit
addresses this by making ES_PATH_CONF absolute before we switch the
working directory to ES_HOME.
Relates #28700
When we submit a task to a thread pool for asynchronous execution, we
are returned a future. Since we submitted to go asynchronous, these
futures are not inspected for failure (we would have to block a thread
to do that). While we have on failure handlers for exceptions that are
thrown during execution, we do not handle throwables that are not
exceptions and these end up silently lost. This commit adds a check
after the runnable returns that inspects the status of the future. If an
unhandled throwable occurred during execution, this throwable is
propogated out where it will land in the uncaught exception handler.
Relates #28667
* Move more XContent.createParser calls to non-deprecated version
This moves more of the callers to pass in the DeprecationHandler.
Relates to #28504
* Use parser's deprecation handler where available
[TEST] packaging: function to collect debug info
Sometimes when packaging tests fail in CI the test logs aren't enough to
tell what went wrong. This routine helps collect more info about the
state of the es installation at failure time
Generalizing BWC building so that there is less code to modify for a release. This ensures we do not
need to think about what major or minor version is in the gradle code. It follows the general rules of the
elastic release structure. For more information on the rules, see the VersionCollection's javadoc.
This also removes the additional bwc snapshots that will never be released, such as 6.0.2, which were
being built and tested against every time we ran bwc tests.
Additionally, it creates 4 new projects that correspond to the different types of snapshots that may exist
for a given version. Its possible to now run those individual tasks to work out bwc logic whereas
previously it was impossible and the entire suite of bwc tests had to be run to work out any logic
changes in the build tools' bwc project. Please note that if the project does not make sense for the
version that is current, that an error will be thrown from that individual project if an attempt is made to
run it.
This should allow for automating the version bumps as well, since it removes all the hardcoded version
logic from the configs.
Currently meta plugins will ask for confirmation of security policy
exceptions for each bundled plugin. This commit collects the necessary
permissions of each bundled plugin, and asks for confirmation of all of
them at the same time.
This pull request replaces the jvm-example plugin (from the jvm/site plugins era) by two new plugins: a custom-settings that shows how to register and use custom settings (including secured settings) in a plugin, and rest-handler plugin that shows how to register a rest handler.
The two plugins now reside in the plugins/examples project. They can serve as sample plugins for users, a special attention has been put on documentation. The packaging tests have been adapted to use the custom-settings plugin.
Our rest client throws exceptions in funny ways that might cause
`suppressed` exceptions to be eaten. This works around that in the
reindex-from-old tests so we don't stomp on a real failure. It is fairly
diryt so we should work on fixing the high level rest client.
Relates to #25453
The current install_plugin() does not play well with meta plugins because
it always checks for the plugin's descriptor file.
This commit changes the install_plugin() so that it only runs the install plugin
command and lets the caller verify that the required files are correctly installed.
It also adds a install_meta_plugin() function to install meta plugins.
Currenty the rest response of the ranking evaluation API wraps all inside an
enclosing `rank_eval` object. This is redundant since it is clear from the API
call and it doesn't provide any other useful information. This change removes
this.
This commit lessens the burden on configuring settings.gradle when new
projects are added. In particular, this makes it trivial to move a
plugin to a module (or vice versa).
This commit modifies the build to require JDK 9 for
compilation. Henceforth, we will compile with a JDK 9 compiler targeting
JDK 8 as the class file format. Optionally, RUNTIME_JAVA_HOME can be set
as the runtime JDK used for running tests. To enable this change, we
separate the meaning of the compiler Java home versus the runtime Java
home. If the runtime Java home is not set (via RUNTIME_JAVA_HOME) then
we fallback to using JAVA_HOME as the runtime Java home. This enables:
- developers only have to set one Java home (JAVA_HOME)
- developers can set an optional Java home (RUNTIME_JAVA_HOME) to test
on the minimum supported runtime
- we can test compiling with JDK 9 running on JDK 8 and compiling with
JDK 9 running on JDK 9 in CI
Currently if the Lucene version is `X.Y.Z-snapshot-{gitrev}`, then we will
expect the docs to have `X.Y.Z-snapshot` as a Lucene version. I would like
to change it to `X.Y.Z` so that this doesn't need changing when we move from a
snapshot to a final release.
This is related to #27933. It introduces a jar named elasticsearch-core
in the lib directory. This commit moves the JarHell class from server to
elasticsearch-core. Additionally, PathUtils and some of Loggers are
moved as JarHell depends on them.
The configuration of the upgraded cluster task was missing a dependency
on the stopping of the second old node in the cluster. In some cases
(e.g., --parallel) Gradle would then try to run the configuration of a
node in the upgraded cluster before it had even configured the old nodes
in the cluster.
Relates #28036
This commit adds the ability to package multiple plugins in a single zip.
The zip file for a meta plugin must contains the following structure:
|____elasticsearch/
| |____ <plugin1> <-- The plugin files for plugin1 (the content of the elastisearch directory)
| |____ <plugin2> <-- The plugin files for plugin2
| |____ meta-plugin-descriptor.properties <-- example contents below
The meta plugin properties descriptor is mandatory and must contain the following properties:
description: simple summary of the meta plugin.
name: the meta plugin name
The installation process installs each plugin in a sub-folder inside the meta plugin directory.
The example above would create the following structure in the plugins directory:
|_____ plugins
| |____ <name_of_the_meta_plugin>
| | |____ meta-plugin-descriptor.properties
| | |____ <plugin1>
| | |____ <plugin2>
If the sub plugins contain a config or a bin directory, they are copied in a sub folder inside the meta plugin config/bin directory.
|_____ config
| |____ <name_of_the_meta_plugin>
| | |____ <plugin1>
| | |____ <plugin2>
|_____ bin
| |____ <name_of_the_meta_plugin>
| | |____ <plugin1>
| | |____ <plugin2>
The sub-plugins are loaded at startup like normal plugins with the same restrictions; they have a separate class loader and a sub-plugin
cannot have the same name than another plugin (or a sub-plugin inside another meta plugin).
It is also not possible to remove a sub-plugin inside a meta plugin, only full removal of the meta plugin is allowed.
Closes#27316
We have a packaging test that tries to install all plugins, and then
asserts that all expected plugins are installed. The expected plugins
are dervied from the list of plugins in the plugins sub-project. The
plugin transport-nio was recently added here, but explicit commands to
install and remove this plugin were never added. This commit addresses
this.
The full-cluster-restart tests are run with two nodes. This can lead to situations where the shrink tests fail because
the replicas are not allocated yet and the shrink operation needs the source shards to be available on the same node.
This is related to #27260. This commit moves the NioTransport from
:test:framework to a new nio-transport plugin. Additionally, supporting
tcp decoding classes are moved to this plugin. Generic byte reading and
writing contexts are moved to the nio library.
Additionally, this commit adds a basic MockNioTransport to
:test:framework that is a TcpTransport implementation for testing that
is driven by nio.
Lucene does not allow adding Lucene 6 files to a Lucene 7 index. This commit ensures that we carry over the Lucene version to the newly created Lucene index.
Closes#28061
This commit adds the infrastructure to plugin building and loading to
allow one plugin to extend another. That is, one plugin may extend
another by the "parent" plugin allowing itself to be extended through
java SPI. When all plugins extending a plugin are finished loading, the
"parent" plugin has a callback (through the ExtensiblePlugin interface)
allowing it to reload SPI.
This commit also adds an example plugin which uses as-yet implemented
extensibility (adding to the painless whitelist).
Previously we disabled these tests on JDK 9 and JDK 10 because Wildfly
10 did not support JDK 9 and JDK 10. With the release of Wildfly 11
supporting JDK 9 and JDK 10 and now that we depend on Wildfly 11 in
these tests, we can enable these tests on JDK 9 and JDK 10.
Relates #28042
This commit fixes a flubbed assertion in the Wildfly build file; the
intention was to assert that we have only set the value of the
management port once except the assertion that the management port was
equal to zero when finding a matching log line was left off.
The Wildfly tests previously needed hardcoded ports which would
sometimes already be in use leading to Wildfly test failures because the
server could not bind during startup. We had to wait until some upstream
changes (wildfly/wildfly#9943) and (wildfly/wildfly-core#2390) were
released before we could use ephemeral ports in these tests. These
changes are released now so this commit changes the Wildfly tests to use
ephemeral ports when starting Wildfly.
Relates #28040
* Adds task dependenciesInfo to BuildPlugin to generate a CSV file with dependencies information (name,version,url,license)
* Adds `ConcatFilesTask.groovy` to concatenates multiple files into one
* Adds task `:distribution:generateDependenciesReport` to concatenate `dependencies.csv` files into a single file (`es-dependencies.csv` by default)
# Examples:
$ gradle dependenciesInfo :distribution:generateDependenciesReport
## Use `csv` system property to customize the output file path
$ gradle dependenciesInfo :distribution:generateDependenciesReport -Dcsv=/tmp/elasticsearch-dependencies.csv
## When branch is not master, use `build.branch` system property to generate correct licenses URLs
$ gradle dependenciesInfo :distribution:generateDependenciesReport -Dbuild.branch=6.x -Dcsv=/tmp/elasticsearch-dependencies.csv
We disable these tests because the JVM flags we use will not start with
JDK 10. Since we do not support running these old versions on newer JDKs
anyway, this commit disables testing of these when running on JDK 10.
This commit moves GlobalCheckpointTracker from the engine to IndexShard, where it better fits logically: Tracking the global checkpoint based on the local checkpoints of all shards in the replication group is not a property of the engine, but rather a property fulfilled by the current primary shard. The LocalCheckpointTracker on the other hand is driven by the contents of the local translog. By moving GlobalCheckpointTracker to IndexShard, it makes little sense to keep the SequenceNumbersService class around - it would only wrap the LocalCheckpointTracker. This commit therefore removes the class and replaces occurrences of SequenceNumbersService in the engine directly by LocalCheckpointTracker.
This reverts commit e04e5ab037 as we no longer need the increased
logging for the mixed cluster tests. This will reduce the size of logs for some build failures.
If you assert that a pattern of files exists but it matches more then
one file the "assert this file exists" code failed with a misleading
error message. This tests if the patter resolved to multiple files and
prints a better error message if it did.
For too long we have been groping around in the dark when faced with GC
issues because we rarely have GC logs at our disposal. This commit
enables GC logging by default out of the box.
Relates #27610
Any CLI commands that depend on core Elasticsearch might touch classes
(directly or indirectly) that depends on logging. If they do this and
logging is not configured, Log4j will dump status error messages to the
console. As such, we need to ensure that any such CLI command configures
logging (with a trivial configuration that dumps log messages to the
console). Previously we did this in the base CLI command but with the
refactoring of this class out of core Elasticsearch, we no longer
configure logging there (since we did not want this class to depend on
settings and logging). However, this meant for some CLI commands (like
the plugin CLI) we were no longer configuring logging. This commit adds
base classes between the low-level command and multi-command classes
that ensure that logging is configured. Any CLI command that depends on
core Elasticsearch should use this infrastructure to ensure logging is
configured. There is one exception to this: Elasticsearch itself because
it takes reponsibility into its own hands for configuring logging from
Elasticsearch settings and log4j2.properties. We preserve this special
status.
Relates #27523
Today we require users to prepare their indices for split operations.
Yet, we can do this automatically when an index is created which would
make the split feature a much more appealing option since it doesn't have
any 3rd party prerequisites anymore.
This change automatically sets the number of routinng shards such that
an index is guaranteed to be able to split once into twice as many shards.
The number of routing shards is scaled towards the default shard limit per index
such that indices with a smaller amount of shards can be split more often than
larger ones. For instance an index with 1 or 2 shards can be split 10x
(until it approaches 1024 shards) while an index created with 128 shards can only
be split 3x by a factor of 2. Please note this is just a default value and users
can still prepare their indices with `index.number_of_routing_shards` for custom
splitting.
NOTE: this change has an impact on the document distribution since we are changing
the hash space. Documents are still uniformly distributed across all shards but since
we are artificually changing the number of buckets in the consistent hashign space
document might be hashed into different shards compared to previous versions.
This is a 7.0 only change.
Today Cross Cluster Search requires at least one node in each remote cluster to be up once the cross cluster search is run. Otherwise the whole search request fails despite some of the data (either local and/or remote) is available. This happens when performing the _search/shards calls to find out which remote shards the query has to be executed on. This scenario is different from shard failures that may happen later on when the query is actually executed, in case e.g. remote shards are missing, which is not going to fail the whole request but rather yield partial results, and the _shards section in the response will indicate that.
This commit introduces a boolean setting per cluster called search.remote.$cluster_alias.skip_if_disconnected, set to false by default, which allows to skip certain clusters if they are down when trying to reach them through a cross cluster search requests. By default all clusters are mandatory.
Scroll requests support such setting too when they are first initiated (first search request with scroll parameter), but subsequent scroll rounds (_search/scroll endpoint) will fail if some of the remote clusters went down meanwhile.
The search API response contains now a new _clusters section, similar to the _shards section, that gets returned whenever one or more clusters were disconnected and got skipped:
"_clusters" : {
"total" : 3,
"successful" : 2,
"skipped" : 1
}
Such section won't be part of the response if no clusters have been skipped.
The per cluster skip_unavailable setting value has also been added to the output of the remote/info API.
Projects the depend on the CLI currently depend on core. This should not
always be the case. The EnvironmentAwareCommand will remain in :core,
but the rest of the CLI components have been moved into their own
subproject of :core, :core:cli.
Currently, we are using a plain TransportRequestHandler to post snapshot
status messages to the master. However, it doesn't have a robust retry
mechanism as TransportMasterNodeAction. This change migrates from
TransportRequestHandler to TransportMasterNodeAction for the new
versions and keeps the current implementation for the old versions.
Closes#27151
When the vagrant box is very very slow, the elasticsearch service can
take more than 60 sec to start. This commit changes the timeout to 120.
closes#27372
* REST: Rename ingest.processor.grok to ingest.processor_grok
* REST: Rename remote.info to cluster.remote_info
* REST: Fixed bad YAML comments
* REST: Force dummy scripts to be strings, not numbers
* REST: Fix bad YAML in search/110_field_collapsing.yml
* REST: Adjust percentile tests to work with Perl number handling
extract all clauses from a conjunction query.
When clauses from a conjunction are extracted the number of clauses is
also stored in an internal doc values field (minimum_should_match field).
This field is used by the CoveringQuery and allows the percolator to
reduce the number of false positives when selecting candidate matches and
in certain cases be absolutely sure that a conjunction candidate match
will match and then skip MemoryIndex validation. This can greatly improve
performance.
Before this change only a single clause was extracted from a conjunction
query. The percolator tried to extract the clauses that was rarest in order
(based on term length) to attempt less candidate queries to be selected
in the first place. However this still method there is still a very high
chance that candidate query matches are false positives.
This change also removes the influencing query extraction added via #26081
as this is no longer needed because now all conjunction clauses are extracted.
https://www.elastic.co/guide/en/elasticsearch/reference/6.x/percolator.html#_influencing_query_extractionCloses#26307
If an out of memory error is thrown while merging, today we quietly
rewrap it into a merge exception and the out of memory error is
lost. Instead, we need to rethrow out of memory errors, and in fact any
fatal error here, and let those go uncaught so that the node is torn
down. This commit causes this to be the case.
Relates #27265
The warnings headers have a fairly limited set of valid characters
(cf. quoted-text in RFC 7230). While we have assertions that we adhere
to this set of valid characters ensuring that our warning messages do
not violate the specificaion, we were neglecting the possibility that
arbitrary user input would trickle into these warning headers. Thus,
missing here was tests for these situations and encoding of characters
that appear outside the set of valid characters. This commit addresses
this by encoding any characters in a deprecation message that are not
from the set of valid characters.
Relates #27269
Only tests should use the single argument Environment constructor. To
enforce this the single arg Environment constructor has been replaced with
a test framework factory method.
Production code (beyond initial Bootstrap) should always use the same
Environment object that Node.getEnvironment() returns. This Environment
is also available via dependency injection.
Prior to this change if the `bwcTest` task is run then it would create
task for each version, but each task in reality would use wireCompatVersions - 1
ES version. So we were not actually testing against 5.6.x versions in the
6.x and 6.0 branches.
This commit adjusts the assertions for the sequence number BWC tests to
account for the fact that sometimes these tests are run in
mixed-clusters with 5.6 nodes (that do not understand sequence numbers),
and sometimes these tests are run in mixed-cluster with 6.0+ nodes (that
all understood sequence numbers).
Relates #27251
Windows handles trying to read a file that does not exist because a
component of the path is not a directory differently than other OS
handle this situation. This commit adjusts these assertions for Windows.
Finder creates these files if you browse a directory there. These files
are really annoying, but it's an incredible pain for users that these
files are created unbeknownst to them, and then they get in the way of
Elasticsearch starting. This commit adds leniency on macOS only to skip
these files.
Relates #27108
Today all these API calls have a sideeffect of making documents visible
to search requests. While this is sometimes desired it's an unnecessary sideeffect
and now that we have an internal (engine-private) index reader (#26972) we artificially
add a refresh call for bwc. This change removes this sideeffect in 7.0.
The rolling-upgrade test was only writing the "minimum_master_nodes" setting to the configuration file of the old nodes, but not the upgraded ones.
Also changes the value of "minimum_master_nodes" from "number_of_nodes" to "(number_of_nodes / 2) + 1".
Today we return a `String[]` that requires copying values for every
access. Yet, we already store the setting as a list so we can also directly
return the unmodifiable list directly. This makes list / array access in settings
a much cheaper operation especially if lists are large.
The shard preference _primary, _replica and its variants were useful
for the asynchronous replication. However, with the current impl, they
are no longer useful and should be removed.
Closes#26335
The single shard optimization that we have in our search api changes the type of response returned by the query transport action name based on the shard search request. if the request goes to one shard, we will do query and fetch at the same time, hence the response will be different. The proxying layer used in cross cluster search was not aware of this distinction, which causes serialization issues every time a cross cluster search request goes to a single shard and goes through a gateway node which has to forward the shard request to a data node. The coordinating node would then expect a QueryFetchSearchResult while the gateway would return a QuerySearchResult.
Closes#26833
Since `#getAsMap` exposes internal representation we are trying to remove it
step by step. This commit is cleaning up some xcontent writing as well as
usage in tests
The ensure green approach to avoid allocation delays caused problems with other indices created by other tests which didn't use ensure green in the various cluster stages. This aligns testHistoryUUIDIsGenerated to use the same approach used by the other test.
This commit increases the amount of time to wait for green to accound for unassigned shards that
have been delayed. The default delay is 60s, so we need to wait longer than that. Previously, the
wait would timeout at 30s due to the rest client and the default for the cluster health api.
Closes#26742
The test starts with two old nodes and creates indices (without waiting for green, which is fixed here too). Then it restarts one of the nodes and waits for it to join the cluster. This wait condition only uses wait for yellow as our generic infra doesn't how many nodes are there in total. Once the restarted node is part of the cluster (mixed mode) the second old node is restarted. If indices are not fully allocated when that happens, the shards will go into delayed unassigned mode. If the recovery of the replica never completed we may end up with corrupted / no secondary copy on the node. This will cause the shards to be delayed for 1m before being reassigned and the test will time out.
It is the exciting return of the global checkpoint background
sync. Long, long ago, in snapshot version far, far away we had and only
had a global checkpoint background sync. This sync would fire
periodically and send the global checkpoint from the primary shard to
the replicas so that they could update their local knowledge of the
global checkpoint. Later in time, as we sped ahead towards finalizing
the initial version of sequence IDs, we realized that we need the global
checkpoint updates to be inline. This means that on a replication
operation, the primary shard would piggy back the global checkpoint with
the replication operation to the replicas. The replicas would update
their local knowledge of the global checkpoint and reply with their
local checkpoint. However, this could allow the global checkpoint on the
primary to advance again and the replicas would fall behind in their
local knowledge of the global checkpoint. If another replication
operation never fired, then the replicas would be permanently behind. To
account for this, we added one more sync that would fire when the
primary shard fell idle. However, this has problems:
- the shard idle timer defaults to five minutes, a long time to wait
for the replicas to learn of the new global checkpoint
- if a replica missed the sync, there was no follow-up sync to catch
them up
- there is an inherent race condition where the primary shard could
fall idle mid-operation (after having sent the replication request to
the replicas); in this case, there would never be a background sync
after the operation completes
- tying the global checkpoint sync to the idle timer was never natural
To fix this, we add two additional changes for the global checkpoint to
be synced to the replicas. The first is that we add a post-operation
sync that only fires if there are no operations in flight and there is a
lagging replica. This gives us a chance to sync the global checkpoint to
the replicas immediately after an operation so that they are always kept
up to date. The second is that we add back a global checkpoint
background sync that fires on a timer. This timer fires every thirty
seconds, and is not configurable (for simplicity). This background sync
is smarter than what we had previously in the sense that it only sends a
sync if the global checkpoint on at least one replica is lagging that of
the primary. When the timer fires, we can compare the global checkpoint
on the primary to its knowledge of the global checkpoint on the replicas
and only send a sync if there is a shard behind.
Relates #26591
The `fielddata` field and the use of the `_name` field in the short syntax of the range
query have been deprecated in 5.0 and can be removed.
The same goes for the deprecated `score_mode` field in HasParentQueryBuilder,
the deprecated `like_text`, `ids` and `docs` parameter in the `more_like_this` query,
the deprecated query name in the short version of the `regexp` query, and several
deprecated alternative field names in other query builders.
Restoring a shard from snapshot throws the primary back in time violating assumptions and bringing the validity of global checkpoints in question. To avoid problems, we should make sure that a shard that was restored will never be the source of an ops based recovery to a shard that existed before the restore. To this end we have introduced the notion of `histroy_uuid` in #26577 and required that both source and target will have the same history to allow ops based recoveries. This PR make sure that a shard gets a new uuid after restore.
As suggested by @ywelsch , I derived the creation of a `history_uuid` from the `RecoverySource` of the shard. Store recovery will only generate a uuid if it doesn't already exist (we can make this stricter when we don't need to deal with 5.x indices). Peer recovery follows the same logic (note that this is different than the approach in #26557, I went this way as it means that shards always have a history uuid after being recovered on a 6.x node and will also mean that a rolling restart is enough for old indices to step over to the new seq no model). Local shards and snapshot force the generation of a new translog uuid.
Relates #10708Closes#26544
The new ops based recovery, introduce as part of #10708, is based on the assumption that all operations below the global checkpoint known to the replica do not need to be synced with the primary. This is based on the guarantee that all ops below it are available on primary and they are equal. Under normal operations this guarantee holds. Sadly, it can be violated when a primary is restored from an old snapshot. At the point the restore primary can miss operations below the replica's global checkpoint, or even worse may have total different operations at the same spot. This PR introduces the notion of a history uuid to be able to capture the difference with the restored primary (in a follow up PR).
The History UUID is generated by a primary when it is first created and is synced to the replicas which are recovered via a file based recovery. The PR adds a requirement to ops based recovery to make sure that the history uuid of the source and the target are equal. Under normal operations, all shard copies will stay with that history uuid for the rest of the index lifetime and thus this is a noop. However, it gives us a place to guarantee we fall back to file base syncing in special events like a restore from snapshot (to be done as a follow up) and when someone calls the truncate translog command which can go wrong when combined with primary recovery (this is done in this PR).
We considered in the past to use the translog uuid for this function (i.e., sync it across copies) and thus avoid adding an extra identifier. This idea was rejected as it removes the ability to verify that a specific translog really belongs to a specific lucene index. We also feel that having a history uuid will serve us well in the future.
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
This commit refactors the bootstrap checks into a single result object
that encapsulates whether or not the check passed, and a failure message
if the check failed. This simpifies the checks, and enables the messages
to more easily be based on the state used to discern whether or not the
check passed.
Relates #26637
This exposes the node settings and the persistent part of the cluster state to the
bootstrap checks to allow plugins to enforce certain preconditions based on the
recovered state.
There is a bug in Log4j on JDK 9 for walking the stack to find where a
log line is coming from. This bug is impacting some of our testing, so
this commit marks these tests as skippable only on JDK 9 until the bug
is fixed upstream.
Relates #26467
The current script service has a script compilation limit for a one
minute window. This is set to a small default value of 15. Instead of
increasing that default value, this commit introduces a new setting
that allows to configure a rate per time unit, so that the script service can deal with bursts better.
The new setting is named `script.max_compilations_rate`,
requires a nonnegative number and a positive time value.
The default is `75/5m`, which is equivalent to the existing 15 per minute.
This commit adds writing build metadata to the `check` command for each
bwc project. This ensures the files will be written if doing a general
`gradle check`, which is what CI intake jobs do. In later jobs like
bwcTest, the extra bwc-release-snapshot info is needed.
Note this commit also has a little cleanup of the output for the bwc
checkout, as it was plastering a git warning, instead of the real info
we care about (the refspec and commit that were used).
When creating the keystore explicitly (from executing
elasticsearch-keystore create) or implicitly (for plugins that require
the keystore to be created on install) on an Elasticsearch package
installation, we are running as the root user. This leaves
/etc/elasticsearch/elasticsearch.keystore having the wrong ownership
(root:root) so that the elasticsearch user can not read the keystore on
startup. This commit adds setgid to /etc/elasticsearch on package
installation so that when executing this directory (as we would when
creating the keystore), we will end up with the correct ownership
(root:elasticsearch). Additionally, we set the permissions on the
keystore to be 660 so that the elasticsearch user via its group can read
this file on startup.
Relates #26412
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
This commit removes the keystore creation on elasticsearch startup, and
instead adds a plugin property which indicates the plugin needs the
keystore to exist. It does still make sure the keystore.seed exists on
ES startup, but through an "upgrade" method that loading the keystore in
Bootstrap calls.
closes#26309
By making RestHighLevelClient Closeable, its close method will close the internal low-level REST client instance by default, which simplifies the way most users interact with the high-level client.
Its constructor accepts now a RestClientBuilder, which clarifies that the low-level REST client is internally created and managed.
It is still possible to provide an already built `RestClient` instance, but that can only be done by subclassing `RestHighLevelClient` and calling the protected constructor that accepts a `RestClient`. In such case a consumer has also to be provided, which controls what has to be done when the high-level client gets done.
Closes#26086
This commit makes the security code aware of the Java 9 FilePermission changes (see #21534) and allows us to remove the `jdk.io.permissionsUseCanonicalPath` system property.
We previously explicitly set the HOSTNAME environment variable so that
${HOSTNAME} could be used a placeholder for defining the node.name in
elasticsearch.yml. We removed explicitly setting this because bash
defines HOSTNAME. The problem is that bash defines HOSTNAME as a bash
variable, not as an environment variable. Therefore, to restore the
previous behavior, we export the bash value for HOSTNAME as an
environment variable named HOSTNAME. For consistency between Windows and
the Unix-like systems, we also define HOSTNAME with a value equal to the
environment variable COMPUTERNAME on Windows.
Relates #26262
We previously added a RuntimeDirectory directive to the systemd service
file for Elasticsearch. This commit adds a packaging test for the
situation that this directive was intended to address.
Relates #26229
Our documentation for the API is:
```
The _upgrade API is no longer useful and will be removed.
Instead, see Reindex to upgrade.
```
Given that, I don't think we need to test the API anymore.
Closes#25311
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
This commit adds the nio transport as an option in place of the mock tcp
transport for tests. Each test will only use one transport type. The
transport type is decided by a random boolean generated inside of the
`ESTestCase` class.
This commit updates the version for master to 7.0.0-alpha1. It also adds
the 6.1 version constant, and fixes many tests, as well as marking some
as awaits fix.
Closes#25893Closes#25870
When ES starts up we verify we can write to all data folders and that they support atomic moves. We do so by creating and deleting temp files. If for some reason the files was successfully created but not successfully deleted, we still shut down correctly but subsequent start attempts will fail with a file already exists exception.
This commit makes sure to first clean any existing temporary files.
Superseeds #21007
We set some limits in the service file for Elasticsearch when installed
as a service on systemd-based systems. This commit adds a packaging test
that these limits are indeed set correctly.
Relates #25976
This commit removes some useless empty lines checks from the evil JNA
tests. These empty lines checks are useless because if the lines are
actually empty, the for loop will never be entered and we will hit the
fail condition at the bottom as intended anyway.
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
This commit removes a rolling upgrade test for scripting that is totally
busted yet is preventing builds from succeeding. We elect to remove this
test as opposed to skipping the test as:
- it has beeen being skipped for months with no apparent loss
- it appears to need significant work to get to an unbusted state
This commit cleans up a few items with the script packaging:
- remove the now dead elasticsearch.in.sh script
- add assertions for the existence elasticsearch-env and
elasticsearch-keystore
The Writeble representation is less heavy to parse and that will benefit percolate performance and throughput.
The query builder's binary format has now the same bwc guarentees as the xcontent format.
Added a qa test that verifies that percolator queries written in older versions are still readable by the current version.
This commit fixes tests for environment-aware commands. A previous
change added a check that es.path.conf is not null. The problem is that
this system property is not being set in tests so this check trips every
single time. To fix this, we move the check into a method that can be
overridden, and then override this method in relevant places in tests to
avoid having to set the property in tests. We also add a test that this
check works as expected.
Today when we aggregate on the `_index` field the cross cluster search
alias is not taken into account. Neither is it respected when we search
on the field. This change adds support for cluster alias when the cluster
alias is present on the `_index` field.
Closes#25606
This commit removes all external dependencies from the rest client jar
and shades them in an 'org.elasticsearch.client' package within the jar
using shadowJar gradle plugin. All projects that depended on the
existing jar have been converted to using the 'org.elasticsearch.client'
package prefixes to interact with the rest client.
Closes#25208
This commit introduces the elasticsearch-env script. The purpose of this
script is threefold:
- vastly simplify the various scripts used in Elasticsearch
- provide a script that can be included in other scripts in the
Elasticsearch ecosystem (e.g., plugins)
- correctly establish the environment for all scripts (e.g., so that
users can run `elasticsearch-keystore` from a package distribution
without having to worry about setting `CONF_DIR` first, otherwise the
keystore would be created in the wrong location)
Relates #25815
This commit removes legacy checks for unsupported an environment
variable and unsupported system properties. This environment variable
and these system properties have not been supported since 1.x so it is
safe to stop checking for the existence of these settings.
Relates #25809
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
This commit reverts a rename of the systemd packaging tests. The rename
was done locally to speed up iteration of testing some changes against
systemd but was not reverted before pushing. This commit reverts this
change.
On Debian-based systems the install scripts are run with set -e meaning
that if there is an error in executing one of these scripts then the
script fails. If systemd-sysctl is masked then trying to restart the
systemd-sysctl service to pick up the changes to vm.max_map_count will
fail leading to the post-install script failing. Instead, we should
account for the possbility of failure here by not letting the command to
restart this service exit with non-zero status code. This commit does
this, and adds a test for this situation.
Relates #25657
We lost the cluster alias due to some special caseing in inner hits
and due to the fact that we didn't pass on the alias to the shard request.
This change ensures that we have the cluster alias present on the shard to
ensure all SearchShardTarget reads preserve the alias.
Relates to #25606
This commit enables the console appender for the settings deprecation
logger used in the deprecated settings logging test. This output will be
useful if this test fails again (it failed once mysteriously).
* Improved REST endpoint exception handling, see #15335
Also improved OPTIONS http method handling to better conform with the
http spec.
* Tidied up formatting and comments
See #15335
* Tests for #15335
* Cleaned up comments, added section number
* Swapped out tab indents for space indents
* Test class now extends ESSingleNodeTestCase
* Capture RestResponse so it can be examined in test cases
Simple addition to surface the RestResponse object so we can run tests
against it (see issue #15335).
* Refactored class name, included feedback
See #15335.
* Unit test for REST error handling enhancements
Randomizing unit test for enhanced REST response error handling. See
issue #15335 for more details.
* Cleaned up formatting
* New constructor to set HTTP method
Constructor added to support RestController test cases.
* Refactored FakeRestRequest, streamlined test case.
* Cleaned up conflicts
* Tests for #15335
* Added functionality to ignore or include path wildcards
See #15335
* Further enhancements to request handling
Refactored executeHandler to prioritize explicit path matches. See
#15335 for more information.
* Cosmetic fixes
* Refactored method handlers
* Removed redundant import
* Updated integration tests
* Refactoring to address issue #17853
* Cleaned up test assertions
* Fixed edge case if OPTIONS method randomly selected as invalid method
In this test, an OPTIONS method request is valid, and should not return
a 405 error.
* Remove redundant static modifier
* Hook the multiple PathTrie attempts into RestHandler.dispatchRequest
* Add missing space
* Correctly retrieve new handler for each Trie strategy
* Only copy headers to threadcontext once
* Fix test after REST header copying moved higher up
* Restore original params when trying the next trie candidate
* Remove OPTIONS for invalidHttpMethodArray so a 405 is guaranteed in tests
* Re-add the fix I already added and got removed during merge :-/
* Add missing GET method to test
* Add documentation to migration guide about breaking 404 -> 405 changes
* Explain boolean response, pull into local var
* fixup! Explain boolean response, pull into local var
* Encapsulate multiple HTTP methods into PathTrie<MethodHandlers>
* Add PathTrie.retrieveAll where all matching modes can be retrieved
Then TrieMatchingMode can be package private and not leak into RestController
* Include body of error with 405 responses to give hint about valid methods
* Fix missing usageService handler addition
I accidentally removed this :X
* Initialize PathTrieIterator modes with Arrays.asList
* Use "== false" instead of !
* Missing paren :-/
In the past global checkpoint syncing was done in the background based an interval set by an index setting. In order to set that setting something reasonable for a test, the master needed to know about the setting. Therefore the test didn't check global checkpoints if the master was old. These days the global checkpoint sync is inlined with indexing operations and that restriction is not needed.
In the rolling upgrade tests, there is a test to create an index with
replica shards and ensure that in the mixed cluster environment, the
cluster health is green before any other tests are executed. However,
there were two problems with this. First, if the replica shard was
residing on the restarted node, then delayed allocation will kick in and
cause the cluster health request to timeout after 1m. The fix to this
was to drastically lower the delayed allocation setting. Second, if the
primary exists on the higher version node, then the replica cannot be
assigned to the lower version node because recovery cannot happen from
lower lucene versions. The fix here was to wait for the cluster health
to be yellow instead of green in the mixed cluster environment. In the
fully upgraded cluster, the cluster health check waits for a green
cluster as before.
Closes#25185
In 6.x we prevent multiple types and default to `index.mapping.single_type: false`
This change removes the registered setting and ensures that it's preserved for
5.x indices.
Relates to #24961
This commit adds an LRU set to used to determine if a keyed deprecation
message should be written to the deprecation logs, or only added to the
response headers on the thread context.
Relates #25474
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
When a setting is deprecated, if that setting is used repeatedly we
currently emit a deprecation warning every time the setting is used. In
cases like hitting settings endpoints over and over against a node with
a lot of deprecated settings, this can lead to excessive deprecation
warnings which can crush a node. This commit ensures that a given
setting only sees deprecation logging at most once.
Relates #25457
This commit changes how we determine if there were any remote indices that a search should have
been executed against. Previously, we used the list of remote shard iterators but if the remote
index pattern resolved to no indices there would be no remote shard iterators even though the
request specified remote indices. The map of remote cluster names to the original indices is used
instead so that we can determine if there were remote indices even when there are no remote shard
iterators.
Closes#25426
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
This removes the remaining usage of `mapping.single_type` from the parent join
module and moves it's bwc test to the mixed cluster tests
Relates to #24961
Relates to #20257
* Remove the setting from the yml tests and replace with tests using
`join` field. We can't use the setting in yml tests without lots of
backflips but we have `ReindexParentChildTests` for the coverage.
There weren't tests for `join` field with reindex before this. Adding
these tests discovered #25363.
* Remove the setting from `ReindexParentChildTests` and replace with
`index.version.created=V_5_6_0`. This test can be entirely removed
when legacy parent/child support is dropped from core.
* Port the yml tests that set _parent into integ tests so they
can set the index created version. These tests can be removed
when we drop support for _parent in core.
* Port a delete-by-query test for filtering based on type to an
`ESIntegTestCase` so it can use `index.version.created=5.6.0` to
setup documents of multiple types. This whole feature can be dropped
when we no longer support multiple types per index.
Relates to #24961
OldIndexBackwardsCompatibilityIT#testOldClusterStates tested whether global and index metadata could be read from data directory,
this can also be tested in full cluster qa test that checks cluster state via api.
Relates to #24939
Ports all of RepositoryUpgradabilityIT to qa:full-cluster-restart and ports as much of RestoreBackwardsCompatIT as possible into qa:full-cluster-restart.
This commit adds a gradle project, set inside the root build.gradle,
which controls all our bwc tests. This allows for seamless (ie no errant
CI failures) backporting of behavior.
In #25201, a setting was added to allow setting the retry timeout for the rest client under the
impression that this would allow requests to go longer than 30s. However, there is also a socket
timeout that needs to be set to greater than 30s, which this change adds a setting for.
This commit adds a setting to change the request timeout for the rest client. This is useful as the
default timeout is 30s, which is also the same default for calls like cluster health. If both are
the same then the response from the cluster health api will not be received as the client usually
times out first making test failures harder to debug.
Relates #25185
Duplicate data paths already fail to work because we would attempt to
take out a node lock on the directory a second time which will fail
after the first lock attempt succeeds. However, how this failure
manifests is not apparent at all and is quite difficult to
debug. Instead, we should explicitly reject duplicate data paths to make
the failure cause more obvious.
Relates #25178
We have a custom logger implementation known as a prefix logger that is
used to write every message by the logger with a given prefix. This is
useful for node-level, index-level, and shard-level messages where we
want to log the node name, index name, and shard ID, respectively, if
possible. The mechanism that we employ is that of a marker. Log4j has a
built-in facility for managing these markers, but its effectively a
memory leak because these markers are held in a map and can never be
released. This is problematic for us since indices and shards do not
necessarily have infinite life spans and so on a node where there are
many indices being creted and destroyed, this infinite lifespan can be a
problem indeed. To solve this, we use our own cache of markers. This is
necessary to prevent too many instances of the marker for the same
prefix from being created (just think of all the shard-level components
that exist in the system), and to workaround the effective leak in
Log4j. These markers are stored as weak references in a weak hash
map. It is these weak references that are unneeded. When a key is
removed from a weak hash map, the corresponding entry is placed on a
reference queue that is eventually cleared. This commit simplifies
prefix logger by removing this unnecessary weak reference wrapper.
Relates #22460
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
This adds an option to `ClusterConfiguration` to preserve the
`shared` directory when starting up a new cluster and switches
the `qa:full-cluster-restart` tests to use it rather than
disable the clean shared task.
Relates to #24846
We're using Vagrant in more places now than before. This commit includes a plugin that verifies
the Vagrant and Virtualbox installations for projects that depend on them. This shared code
should fix up the errors we've seen from CI builds relating to the new Kerberos fixture.
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
We default to 0 replicas in the rolling restart scenario already to ensure
we test against worst case. Yet, this adds a dummy index to ensure we also
recover and index with replicas just fine.
The Lucene version expectation in the verify Lucene version test is
backwards, mixing up the expected and actual values. This commit
reorders them to fix this issue.
The Lucene version constants for 5.4.1 and 5.5.0 are wrong, they are
listed as 6.5.0 instead of 6.5.1. This commit fixes these issues, and
adds a test to ensure that this does not happen again.
Relates #24923
Removes the need for the `_UNRELEASED` suffix on versions by detecting if a version should be unreleased or not based on the versions around it. This should make it simpler to automate the task of adding a new version label.
These tests spin up two nodes of an older version of Elasticsearch,
create some stuff, shut down the nodes, start the current version,
and verify that the created stuff works.
You can run `gradle qa:full-cluster-restart:check` to run these
tests against the head of the previous branch of Elasticsearch
(5.x for master, 5.4 for 5.x, etc) or you can run
`gradle qa:full-cluster-restart:bwcTest` to run this test against
all "index compatible" versions, one after the other. For master
this is every released version in the 5.x.y version *and* the tip
of the 5.x branch.
I'd love to add more to these tests in the future but these
currently just cover the functionality of the `create_bwc_index.py`
script and start to cover the assertions in the
`OldIndexBackwardsCompatibilityIT` test.
This is a simple refactoring to move the context definitions into the
type that they use. While we have multiple context names for the same
class at the moment, this will eventually become one ScriptContext per
instance type, so the pattern of a static member on the interface called
CONTEXT can be used. This commit also moves the consolidated list of
contexts provided by core ES into ScriptModule.
As we work towards contexts implying the return type of compilation, we
first need ScriptContext to not be an enum. This commit removes the
Standard enum and Plugin subclass of ScriptContext.
ScriptEngine implementations have an overridable method to indicate they
are safe to use as inline scripts. Since groovy was removed fro 6.0,
there are no longer any implementations which used the default false
value. Furthermore, the value was not actually read anywhere. This
commit removes the method. The ScriptEngineRegistry was also no longer
necessary as it only was used to build a map from language to engine.
This commit renames the backwards-5.0 qa test to mixed-cluster and
creates a test within the project per wire compat version. Like with
rolling upgrade tests, the integTest task will run against the most
recent version, while all versions will be tested with the bwcTest task.
Now that we generate the versions list from Versions.java we can
drop the list of versions maintained for vagrant testing. One nice
thing that the vagrant testing did was to check if the list of
versions was out of date. This moves that test to the core
project.
This commit changes the rolling upgrade test to create a set of rest
test tasks per wire compat version. The most recent wire compat version
is always tested with the `integTest` task, and all versions can be
tested with `bwcTest`.
This commit expands the logic for version extraction from Version.java
to include a list of all versions for backcompat purposes. The tests
using bwcVersion are converted to use this list, but those tests
(rolling upgrade and backwards-5.0) are still not randomized; that will
happen in another followup.
Today the `_field_caps` API doesn't implement its request serialization
correctly since indices and indices options are not serialized at all.
This will likely break with all transport clients etc. and if this request
must be send across the network. This commit fixes this and adds correct
handling if we have only remote indices to prevent the inclusion of
all local indices.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
In windows we can't reliable git the pid so we skip the
reindex-from-remote tests from old versions of elasticsearch. This
is OK because we aren't really testing windows here anyway. It isn't
great, but should be safe.
Two of the versions of Elasticsearch we need to run for these tests
can't run in Java 9 so we skip the entire test if we are running in
java 9. For now. I'd like to reenable it to run against java 8 if
there is one available, but that can wait for another time.
Relates to #24561
Adds tests for reindex-from-remote for the latest 2.4, 1.7, and
0.90 releases. 2.4 and 1.7 are fairly popular versions but 0.90
is a point of pride.
This fixes any issues those tests revealed.
Closes#23828Closes#24520
This commit renames ScriptEngineService to ScriptEngine. It is often
confusing because we have the ScriptService, and then
ScriptEngineService implementations, but the latter are not services as
we see in other places in elasticsearch.
File scripts have 2 related settings: the path of file scripts, and
whether they can be dynamically reloaded. This commit deprecates those
settings.
relates #21798
Today we rely on background syncs to relay the global checkpoint under
the mandate of the primary to its replicas. This means that the global
checkpoint on a replica can lag far behind the primary. The commit moves
to inlining global checkpoints with replication requests. When a
replication operation is performed, the primary will send the latest
global checkpoint inline with the replica requests. This keeps the
replicas closer in-sync with the primary.
However, consider a replication request that is not followed by another
replication request for an indefinite period of time. When the replicas
respond to the primary with their local checkpoint, the primary will
advance its global checkpoint. During this indefinite period of time,
the replicas will not be notified of the advanced global
checkpoint. This necessitates a need for another sync. To achieve this,
we perform a global checkpoint sync when a shard falls idle.
Relates #24513
Previously, Mustache would call `toString` on the `_ingest.timestamp`
field and return a date format that did not match Elasticsearch's
defaults for date-mapping parsing. The new ZonedDateTime class in Java 8
happens to do format itself in the same way ES is expecting.
This commit adds support for a feature flag that enables the usage of this new date format
that has more native behavior.
Fixes#23168.
This new fix can be found in the form of a cluster setting called
`ingest.new_date_format`. By default, in 5.x, the existing behavior
will remain the same. One will set this property to `true` in order to
take advantage of this update for ingest-pipeline convenience.
When installing plugin permissions, we try to set the permissions on all
installed files ourselves because a umask from the user could violate
everything needed to get the permissions right. Sadly, directories were
not handled correctly at all and so we were still left with broken
installations with umasks like 0077. This commit fixes this issue, adds
a thorough unit test for the situation, and most importantly, adds a
test that sets the umask before installing the plugin.
Relates #24527
The license header in this file was after and on the same line as the
package statement. This commit moves the package statement to be after
the license header.
Netty uses the number of processors for sizing various resources (e.g.,
thread pools, buffer pools, etc.). However, it uses the runtime number
of available processors which might not match the configured number of
processors as set in Elasticsearch to limit the number of threads (for
example, in Docker containers). A new feature was added to Netty that
enables configuring the number of processors Netty should see for sizing
this various resources. This commit takes advantage of this feature to
set this number of available processors to be equal to the configured
number of processors set in Elasticsearch.
Relates #24420
The tribe service can take a while to initialize, depending on how many cluster it needs to connect to. This change moves writing the ports file used by tests to before the tribe service is started.
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
The bats tests are descructive and must be run as root. This is a
horrible combination on any sane system but perfectly fine to do
in a VM. This change modifies the tests so they revuse to start
unless they are in an environment with an `/etc/is_vagrant_vm`
file. The Vagrantfile creates it on startup.
Closes#24137
If the user explicitly configured path.data to include
default.path.data, then we should not fail the node if we find indices
in default.path.data. This commit addresses this.
Relates #24285
In #24251 we fix an issue with stored search templates that
this test would have discovered: stored search templates cause
the node to refuse to start. Technically a "restart" test would
have caught this as well and would have caught it more quickly.
But we already *have* an upgrade test and we don't have restart tests.
And testing this on upgrade is a good thing too.
It seems that Wildfly 10 can not be made to start in a fully-functional
form on JDK 9, so this commit skips running the Wildfly integration
tests on JDK 9.
An important use case for our users is deploying our clients inside of
applications containers like Wildly. Sometimes, we make changes that
unintentionally break this use case. We need to know before we ship a
release that we have broken such use cases. As Wildfly is one of the
bigger application containers, this commit starts by adding an
integration test that deploys an application using the transport client
to Wildfly and ensures that all is well. Future work can add similar
integration tests for the low-level and high-level REST clients.
Relates #24147
The plugin cli currently resides inside the elasticsearch jar. This
commit moves it into a plugin-cli jar. This is change alone is a no-op;
it does not change anything about what is loaded at runtime. But it will
allow easier testing (with fixtures in the future to test ES or maven
installation), as well as eventually not loading these classes when
starting elasticsearch.
This leniency was left in after plugin installer refactoring for 2.0
because some tests still relied on it. However, the need for this
leniency no longer exists.
* Replicate write failures
Currently, when a primary write operation fails after generating
a sequence number, the failure is not communicated to the replicas.
Ideally, every operation which generates a sequence number on primary
should be recorded in all replicas.
In this change, a sequence number is associated with write operation
failure. When a failure with an assinged seqence number arrives at a
replica, the failure cause and sequence number is recorded in the translog
and the sequence number is marked as completed via executing `Engine.noOp`
on the replica engine.
* use zlong to serialize seq_no
* Incorporate feedback
* track write failures in translog as a noop in primary
* Add tests for replicating write failures.
Test that document failure (w/ seq no generated) are recorded
as no-op in the translog for primary and replica shards
* Update to master
* update shouldExecuteOnReplica comment
* rename indexshard noop to markSeqNoAsNoOp
* remove redundant conditional
* Consolidate possible replica action for bulk item request
depanding on it's primary execution
* remove bulk shard result abstraction
* fix failure handling logic for bwc
* add more tests
* minor fix
* cleanup
* incorporate feedback
* incorporate feedback
* add assert to remove handling noop primary response when 5.0 nodes are not supported
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
After splitting integ tests into cluster configuration and the test
runner task, we still have dependencies of the test runner added as deps
of the cluster. This commit adds dependencies directly to the cluster,
so that the runner can have other dependencies independent of what is
needed for the cluster.
We have some packaging tests where we use a custom jvm.options file. The
flags we use here are barebones, just enough to exercise that using a
custom jvm.options files actually works. Due to this, we are missing a
Log4j flag that prevents Log4j from trying to use JMX. If Log4j tries to
use JMX, it hits a security manager exception and tries to log
this. This attempt to log happens before we've configured
logging. Previously, Elasticsearch was lenient here so this was treated
as harmless and the test could march on. Now, we fail startup if we
detect an attempt to log before logging is configured so this prevents
Elasticsearch from starting if we do not have jvm.options files in place
that prevent these log messages from being written before logging is
being configured. This commit adds jvm.options files in the places need
to prevent this.
These tests were marked as awaits fix due to JNA requiring a version of
glibc greater than or equal to version 2.14. Since we still support
systems that would not have this version, we have released our own JNA
dependency that is built to support earlier versions of glibc. This
commit removes some await fixes that were added to tests that failed as
a result of this situation.
It can easily happen that we touch a logger before logging is configured
due to chains of static intializers and other such scenarios. This
commit adds detection for this mechanism that will fail startup if we
touch a logger before logging is configured. This is a bug that will
cause builds to fail.
Relates #24076
This is related to #23893. This commit allows users to use wilcards for
cluster names when executing a cross cluster search.
So instead of defining every cluster such as:
GET one:*,two:*,three:*/_search
A user could just search:
GET *:*/_search
As ":" characters are currently allowed in index names, if the text
up to the first ":" does not match a defined cluster name, the entire
string is treated as an index name.
All our actions that are invoked from rest actions have corresponding
transport actions. This adds the transport action for RestRemoteClusterInfoAction
for consistency.
Relates to #23969
This commit fixes the handling of POSIX permissions on Windows in the
spawner tests. Since POSIX permissions do not exist there, we first have
to check if we are on a filesystem that supports POSIX or not before
attempting to set the permissions.
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
This commit adds a single node discovery type. With this discovery type,
a node will elect itself as master and never form a cluster with another
node.
Relates #23595
We currently have the last minor version of the previous major hardcoded
in tests like rolling upgrade. This change programatically finds this
during gradle initialization by parsing versions from Version.java.
These tests were disabled due to an issue in Netty which has since been
resolved and integrated into Elasticsearch.
Relates elastic/elasticsearch#20260
The current rest backcompat tests, which run against a mixed cluster of
5.x and 6.0 nodes, depend on snapshot builds of 5.x. However, this has
the potential for inconsistency that results in CI failures, and happens
quite often, whenever some backcompat logic is added to 5.x, but the bwc
test on master fails because the 5.x code has not yet been published as
a snapshot.
This change creates a git clone of the 5.x branch,
builds the zip distribution, and ties that into gradle substitutions for
the 5.x version.
We currently use POSIX exit codes in all of our CLIs. However, posix
only suggests these exit codes are standard across tools. It does not
prescribe particular uses for codes outside of that range. This commit
adds 2 exit codes specific to plugin installation to make distinguishing
an incorrectly built plugin and a plugin already existing easier.
closes#15295
This commit catches the underlying failure when trying to list plugin
information when a plugin is incompatible with the current version of
elasticsearch. This could happen when elasticsearch is upgraded but old
plugins still exist. With this change, all plugins will be output,
instead of failing at the first out of date plugin.
closes#20691
This commit marks the EvilJNANativesTests as awaiting fixes due to these
tests failing on platforms that do not provide at least version 2.14 of
glibc.
This commit adds a system property that enables end-users to explicitly
enforce the bootstrap checks, independently of the binding of the
transport protocol. This can be useful for single-node production
systems that do not bind the transport protocol (and thus the bootstrap
checks would not be enforced).
Relates #23585
Throw error when skip or do sections are malformed, such as they don't start with the proper token (START_OBJECT). That signals bad indentation, which would be ignored otherwise. Thanks (or due to) our pull parsing code, we were still able to properly parse the sections, yet other runners weren't able to.
Closes#21980
* [TEST] fix indentation in matrix_stats yaml tests
* [TEST] fix indentation in painless yaml test
* [TEST] fix indentation in analysis yaml tests
* [TEST] fix indentation in generated docs yaml tests
* [TEST] fix indentation in multi_cluster_search yaml tests
Gradle's finalizedBy on tasks only ensures one task runs after another,
but not immediately after. This is problematic for our integration tests
since it allows multiple project's integ test clusters to be
simultaneously. While this has not been a problem thus far (gradle 2.13
happened to keep the finalizedBy tasks close enough that no clusters
were running in parallel), with gradle 3.3 the task graph generation has
changed, and numerous clusters may be running simultaneously, causing
memory pressure, and thus generally slower tests, or even failure if the
system has a limited amount of memory (eg in a vagrant host).
This commit reworks how integ tests are configured. It adds an
`integTestCluster` extension to gradle which is equivalent to the current
`integTest.cluster` and moves the rest test runner task to
`integTestRunner`. The `integTest` task is then just a dummy task,
which depends on the cluster runner task, as well as the cluster stop
task. This means running `integTest` in one project will both run the
rest tests, and shut down the cluster, before running `integTest` in
another project.
* Make document write requests immutable
Previously, write requests were mutated at the
transport level to update request version, version type
and sequence no before replication.
Now that all write requests go through the shard bulk
transport action, we can use the primary response stored
in item level bulk requests to pass the updated version,
seqence no. to replicas.
* incorporate feedback
* minor cleanup
* Add bwc test to ensure correct index version propagates to replica
* Fix bwc for propagating write operation versions
* Add assertion on replica request version type
* fix tests using internal version type for replica op
* Fix assertions to assert version type in replica and recovery
* add bwc tests for version checks in concurrent indexing
* incorporate feedback
In the packaging tests we make some requests to Elasticsearch as part of
the tests. These requests were not setting the content-type header. This
commit addresses this.
In the packaging tests we make some requests to Elasticsearch as part of
the tests. These requests were not setting the content-type header. This
commit addresses this.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
These images have been rebuilt to be preloaded with java 8 installed.
This change re-enables the systems. It also removes some redundancy in
the rpm checks I found while testing the new images, and fixes a
potential issue with generated resources in plugins where a stale dir
can cause junk to get into the distribution.
As part of #22116 we are going to forbid usage of api
java.net.URL#openStream(). However in a number of places across the
we use this method to read files from the local filesystem. This commit
introduces a helper method openFileURLStream(URL url) to read files
from URLs. It does specific validation to only ensure that file:/
urls are read.
Additionlly, this commit removes unneeded method
FileSystemUtil.newBufferedReader(URL, Charset). This method used the
openStream () method which will soon be forbidden. Instead we use the
Files.newBufferedReader(Path, Charset).
Today either all nodes in the cluster connect to remote clusters of only nodes
that have remote clusters configured in their node config. To allow global remote
cluster configuration but restrict connections to a set of nodes in the cluster
this change adds a new setting `search.remote.connect` (defaults to `true`) to allow
to disable remote cluster connections on a per node basis.
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
When a primary is relocated from an old node to a new node, it can have
ops in its translog that do not have a sequence number assigned. When a
file-based recovery is started, this can lead to skipping these ops when
replaying the translog due to a bug in the recovery logic. This commit
addresses this bug and adds a test in the BWC tests.
Relates #22945
Today if a user invokes the remove plugin command without specifying the
name of a plugin to remove, we arrive at a null pointer exception. This
commit adds logic to cleanly handle this situation and provide clear
feedback to the user.
Relates #22930
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
Ben Abrams
Nik Everett
Michael Basnight
Nhat Nguyen
Ryan Ernst
Christoph Büscher
Andy Bristol
Jason Tedor
Tanguy Leroux
Tim Brooks
Luca Cavanna
Alpar Torok
Jim Ferenczi
Adrien Grand
Boaz Leskes
Lee Hinman
Jack Conradson
Yu
Igor Motov
Lee Hinman
Simon Willnauer
Yannick Welsch
Maxime Gréau
Alexander Reelsen
Martijn van Groningen
jaymode
Christoph Büscher
Christoph Büscher
David Turner
javanna
Christoph Büscher
Clinton Gormley
David Roberts
Anton Pozhidaev
kel
Nhat
Jay Modi
Tal Levy
Ali Beyad
Guillaume Le Floch
James Baiera
Colin Goodheart-Smithe
Areek Zillur
Max Goodridge
Chris Buonocore