When you run a `significant_terms` aggregation on a field and it *is*
mapped but there aren't any values for it then the count of the
documents that match the query on that shard still have to be added to
the overall doc count. I broke that in #57361. This fixes that.
Closes#57402
Before to determine if a field is meta-field, a static method of MapperService
isMetadataField was used. This method was using an outdated static list
of meta-fields.
This PR instead changes this method to the instance method that
is also aware of meta-fields in all registered plugins.
Related #38373, #41656Closes#24422
We want to validate the DataStreams on creation to make sure the future backing
indices would not clash with existing indices in the system (so we can
always rollover the data stream).
This changes the validation logic to allow for a DataStream to be created
with a backing index that has a prefix (eg. `shrink-foo-000001`) even if the
former backing index (`foo-000001`) exists in the system.
The new validation logic will look for potential index conflicts with indices
in the system that have the counter in the name greater than the data stream's
generation.
This ensures that the `DataStream`'s future rollovers are safe because for a
`DataStream` `foo` of generation 4, we will look for standalone indices in the
form of `foo-%06d` with the counter greater than 4 (ie. validation will fail if
`foo-000006` exists in the system), but will also allow replacing a
backing index with an index named by prefixing the backing index it replaces.
(cherry picked from commit 695b242d69f0dc017e732b63737625adb01fe595)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Deleting expired data can take a long time leading to timeouts if there
are many jobs. Often the problem is due to a few large jobs which
prevent the regular maintenance of the remaining jobs. This change adds
a job_id parameter to the delete expired data endpoint to help clean up
those problematic jobs.
* Fix Bug With RepositoryData Caching
This fixes a really subtle bug with caching `RepositoryData`
that can corrupt a repository.
We were caching `RepositoryData` serialized in the newest
metadata format. This lead to a confusing situation where
numeric shard generations would be cached in `ShardGenerations`
that were not written to the repository because the repository
or cluster did not yet support `ShardGenerations`.
In the case where shard generations are not actually supported yet,
these cached numeric generations are not safe and there's multiple
scenarios where they would be incorrect, leading to the repository
trying to read shard level metadata from index-N that don't exist.
This commit makes it so that cached metadata is always in the same
format as the metadata in the repository.
Relates #57798
This makes it easier to debug where such tasks come from in case they are returned from the get tasks API.
Also renamed the last occurrence of waitForCompletion to waitForCompletionTimeout in get async search request.
Improve efficiency of background indexer by allowing to add
an assertion for failures while they are produced to prevent
queuing them up.
Also, add non-blocking stop to the background indexer so that when
stopping multiple indexers we don't needlessly continue indexing
on some indexers while stopping another one.
Closes#57766
This PR adds the initial Java side changes to enable
use of the per-partition categorization functionality
added in elastic/ml-cpp#1293.
There will be a followup change to complete the work,
as there cannot be any end-to-end integration tests
until elastic/ml-cpp#1293 is merged, and also
elastic/ml-cpp#1293 does not implement some of the
more peripheral functionality, like stop_on_warn and
per-partition stats documents.
The changes so far cover REST APIs, results object
formats, HLRC and docs.
Backport of #57683
This removes the deprecated `asMultiBucketAggregator` wrapper from
`scripted_metric`. Unlike most other such removals, this isn't likely to
save much memory. But it does make the internals of the aggregator
slightly less twisted.
Relates to #56487
This is a major refactor of the underlying inference logic.
The main refactor is now we are separating the model configuration and
the inference interfaces.
This has the following benefits:
- we can store extra things with the model that are not
necessary for inference (i.e. treenode split information gain)
- we can optimize inference separate from model serialization and storage.
- The user is oblivious to the optimizations (other than seeing the benefits).
A major part of this commit is removing all inference related methods from the
trained model configurations (ensemble, tree, etc.) and moving them to a new class.
This new class satisfies a new interface that is ONLY for inference.
The optimizations applied currently are:
- feature maps are flattened once
- feature extraction only happens once at the highest level
(improves inference + feature importance through put)
- Only storing what we need for inference + feature importance on heap
Backport of #57640 to 7.x branch.
Composable templates with exact matches, can match with the data stream name, but not with the backing index name.
Also if the backing index naming scheme changes, then a composable template may never match with a backing index.
In that case mappings and settings may not get applied.
Adds some guidance for designing clusters to be resilient to
failures, including example architectures.
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: David Turner <david.turner@elastic.co>
#47711 and #47246 helped to validate that monitoring settings are
rejected at time of setting the monitoring settings. Else an invalid
monitoring setting can find it's way into the cluster state and result
in an exception thrown [1] on the cluster state application (there by
causing significant issues). Some additional monitoring settings have
been identified that can result in invalid cluster state that also
result in exceptions thrown on cluster state application.
All settings require a type of either http or local to be
applicable. When a setting is changed, the exporters are automatically
updated with the new settings. However, if the old or new settings lack
of a type setting an exception will be thrown (since exporters are
always of type 'http' or 'local'). Arguably we shouldn't blindly create
and destroy new exporters on each monitoring setting update, but the
lifecycle of the exporters is abit out the scope this PR is trying to
address.
This commit introduces a similar methodology to check for validity as
#47711 and #47246 but this time for ALL (including non-http) settings.
Monitoring settings are not useful unless there an exporter with a type
defined. The type is used as dependent setting, such that it must
exist to set the value. This ensures that when any monitoring settings
changes that they can only get added to cluster state if the type
exists. If the type exists (and the other validations pass) then the
exporters will get re-built and the cluster state remains valid.
Tests have been included to ensure that all dynamic monitoring settings
have the type as dependent settings.
[1]
org.elasticsearch.common.settings.SettingsException: missing exporter type for [found-user-defined] exporter
at org.elasticsearch.xpack.monitoring.exporter.Exporters.initExporters(Exporters.java:126) ~[?:?]
* Clarifying environment variable substitution in the ES configuration YAML
* Update code snippet
* Remove extraneous quotes from string example
* Incorporating review feedback
When we force delete a DF analytics job, we currently first force
stop it and then we proceed with deleting the job config.
This may result in logging errors if the job config is deleted
before it is retrieved while the job is starting.
Instead of force stopping the job, it would make more sense to
try to stop the job gracefully first. So we now try that out first.
If normal stop fails, then we resort to force stopping the job to
ensure we can go through with the delete.
In addition, this commit introduces `timeout` for the delete action
and makes use of it in the child requests.
Backport of #57680
We can't use the high level create snapshot request any longer
since we changed some of its default parameters in `8` and those
are not understood by older versions like `7.4`.
Closes#57650
rewrite config on update if either version is outdated, credentials change,
the update changes the config or deprecated settings are found. Deprecated
settings get migrated to the new format. The upgrade can be easily extended to
do any necessary re-writes.
fixes#56499
backport #57648
For a rolling/mixed cluster upgrade (add new version to existing cluster
then shutdown old instances), the watches that ship by default
with monitoring may not get properly updated to the new version.
Monitoring watches can only get published if the internal state is
marked as dirty. If a node is not master, will also get marked as
clean (e.g. not dirty).
For a mixed cluster upgrade, it is possible for the new node to be
added, not as master, the internal state gets marked as clean so
that no more attempts can be made to publish the watches. This
happens on all new nodes. Once the old nodes are de-commissioned
one of the new version nodes in the cluster gets promoted to master.
However, that new master node (with out intervention like restarting
the node or removing/adding exporters) will never attempt to re-publish
since the internal state was already marked as clean.
This commit adds a cluster state listener to mark the resource dirty
when a node is promoted to master. This will allow the new resource
to be published without any intervention.
Prior to this commit, `cluster.max_shards_per_node` is not correctly handled
when it is set via the YAML config file, only when it is set via the Cluster
Settings API.
This commit refactors how the limit is implemented, both to enable correctly
handling the setting in the YAML and to more effectively centralize the logic
used to enforce the limit. The logic used to apply the limit, as well as the
setting value, has been moved to the new `ShardLimitValidator`.
Moves the source filtering example snippets form the "Request body
search" API docs page to the "Return fields in a search" section of the
"Run a search" page.
Merges the remaining implementation of `significant_terms` into `terms`
so that we can more easilly make them work properly without
`asMultiBucketAggregator` which *should* save memory and speed them up.
Relates #56487
In #55592 and #55416, we deprecated the settings for enabling and disabling
basic license features and turned those settings into no-ops. Since doing so,
we've had feedback that this change may not give users enough time to cleanly
switch from non-ILM index management tools to ILM. If two index managers
operate simultaneously, results could be strange and difficult to
reconstruct. We don't know of any cases where SLM will cause a problem, but we
are restoring that setting as well, to be on the safe side.
This PR is not a strict commit reversion. First, we are keeping the new
xpack.watcher.use_ilm_index_management setting, introduced when
xpack.ilm.enabled was made a no-op, so that users can begin migrating to using
it. Second, the SLM setting was modified in the same commit as a group of other
settings, so I have taken just the changes relating to SLM.
Follow up to #56961:
We can be a little more efficient than just serializing at the IO loop by serializing
only when we flush to a channel. This has the advantage that we don't serialize a long
queue of messages for a channel that isn't writable for a longer period of time (unstable network,
actually writing large volumes of data, etc.).
Also, this further reduces the time for which we hold on to the write buffer for a message,
making allocations because of an empty page cache recycler pool less likely.