Just like specifying `?preference=_primary`, this adds the ability to
specify `?preference=_replica` or `?preference=_replica_first` on
requests that support it.
Resolves#12222
This action is a liveness test added in #8763 . It should be excluded, just like the fault detection logic or things become overly chatty.
Closes#12291
Most of our tests call assertSearchResponse which checks whether all shards
were successful. However this is usually not necessary given that all shards
that received documents should be available given the way our indexing works.
The only shards that might not be available are those that did not index
any documents. So removing this assertion would allow us to remove most
ensureGreen/ensureYellow calls while still being able to assert on the content
of the search response since all data have been taken into account.
For now I only removed the ensureYellow/Green calls from SearchQueryTests in
order to not de-stabilize the build, but eventually we should remove most of
them.
Today, the unicast zen test configuration will try to find a open port starting at the internal test cluster's
base port and continuing for 1000 ports. The internal test cluster class assigns a port range of 100 ports
to each JVM. This means that the unicast zen test configuration will try ports in the range for another JVM
and can lead to port conflicts. This change uses the same value for both so that the unicast configuration
does not go into another JVM's port range.
Add a unique allocation id for a shard, helping to uniquely identify a specific allocation taking place to a node.
A special case is relocation, where a transient relocationId is kept around to make sure the target initializing shard (when using RoutingNodes) is using it for its id, and when relocation is done, the transient relocationId becomes the actual id of it.
closes#12242
If an index name is reused but a leftover shard still exists on any node
we fail repeatedly to allocate the shard since we now check the index UUID
before reusing data. This commit allows to recover even if there is such a
leftover shard by deleting the leftover shard.
Closes#10677
During master election each node pings in order to discover other nodes and validate the liveness of existing nodes. Based on this information the node either discovers an existing master or, if enough nodes are found (based on `discovery.zen.minimum_master_nodes>>) a new master will be elected.
Currently, the node that is elected as master will currently update it the cluster state to indicate the result of the election. Other nodes will submit a join request to the newly elected master node. Instead of immediately processing the election result, the elected master
node should wait for the incoming joins from other nodes, thus validating the elections result is properly applied. As soon as enough nodes have sent their joins request (based on the `minimum_master_nodes` settings) the cluster state is modified.
Note that if `minimum_master_nodes` is not set, this change has no effect.
Closes#12161
Require urls for URL repository to be listed in repositories.url.allowed_urls setting. This change ensures that only authorized URLs can be accessed by elasticsearch
The previous strategy (target/xxx + .m2/repository) is obviously broken for multi-module
builds.
Includes hack for crazy jython, which "finds its own jar" then looks for a Lib/ beside it
Lucene deprecated this in 4.0 and we only try best effort to support it.
Folks should only use edit distance rather than some length based
similarity. Yet the formular is simple enough such that users can
still do it in the client if they really need to.
Closes#10638
The old script syntax has been removed from the Java API but the metrics aggregations were missed. This change removes the old script API from the ValuesSourceMetricsAggregationBuilder and removes the relevant test methods for the metrics aggregations.
Today we have a intermediate hierarchy for shard and index exceptions
which makes it hard to introduce generic exceptions like ResourceNotFoundException
intoduced in this commit. This commit breaks up the hierarchy by adding index and shard
as a special internal header that gets rendered for every exception that fills that header.
This commit removes dedicated exceptions like `IndexMissingException` or
`IndexShardMissingException` in favour of `ResourceNotFoundException`
Change the default delayed allocation timeout from 0 (no delayed allocation) to 1m. The value came from a test of having a node with 50 shards being indexed into (so beefy translog requiring flush on shutdown), then shutting it down and starting it back up and waiting for it to join the cluster. This took, on a slow machine, about 30s.
The value is conservatively low and does not try to address a virtual machine / OS restart for now, in order to not have the affect of node going away and users being concerned that shards are not being allocated to the rest of the cluster as a result of that. The setting can always be changed in order to increase the delayed allocation if needed.
closes#12166
The MetaData.clusterUUID is guaranteed to be unique across clusters and is handy (which may or may not have the same human readable cluster name).
Closes#11832
As explained in #11831, we currently have uuid fields on the cluster state, meta data and index metadata. The latter two are persistent across changes are being effectively used as a persistent uuid for this cluster and a persistent uuid for an index. The first (ClusterState.uuid) is ephemeral and changes with every change to the cluster state. This is confusing,
We settled on having the following, new names:
-> ClusterState.uuid -> stateUUID (transient)
-> MetaData.uuid -> clusterUUID (persistent)
-> IndexMetaData.uuid -> indexUUID (persistent).
Closes#11914Closes#11831
Today we throw ElasticsearchException if we can't lock the index. This can cause
problems since some places where we have logic to deal with IOException on shard
deletion won't schedule a retry if we can't lock the index dir for removal. This
is the case on shadow replicas for instance if a shared FS is used. The result
of this is that the delete of an index is never acked.
A change in #12116 introduces closing / cleaning of search ctx even if
the index service was closed due to a relocation of it's last shard. This
is not desired since in that case it's fine to serve the pending requests from
the relocated shard. This commit adds an extra check to ensure that the index is
either removed (delete) or closed via API.
The term query parser was too lenient during parsing and allowed to specify
more than one field, even though this expected to filter only for a single field.
This commit returns an exception if a query has been specified more than once.
Closes#12184
Modified ScriptEngineService to pass in a CompiledScript object
with newly added name and type member variables.
This can in turn be used to give better scripting error messages
with the type of script used and the name of the script.
Required slight modifications to the caching mechanism.
Note that this does not enforce good behavior in that plugins will
have to write exceptions that also output the name of the script
in order to be effective. There was no way to wrap the script
methods in a try/catch block properly further up the chain because
many have script-like objects passed back that can be run at a
later time.
closes#6653closes#11449
Changes in a nutshell:
* All expression logic is now encapsulated by ExpressionResolver interface.
* MetaData#convertFromWildcards() gets replaced by WildcardExpressionResolver.
* All of the indices expansion methods are being moved from MetaData class to the new IndexNameExpressionResolver class.
* All single index expansion optimisations are removed.
The logic for resolving a concrete index name from an expression has been moved from MetaData to IndexExpressionResolver. The logic has been cleaned up and simplified were was possible without breaking bwc.
Also the notion of aliasOrIndex has been changed to index expression.
The IndexNameExpressionResolver translates index name expressions into concrete indices. The list of index name expressions are first delegated to the known ExpressionResolverS. An ExpressionResolver is responsible for translating if possible an expression into another expression (possibly but not required this can be concrete indices or aliases) otherwise the expressions are left untouched. Concretely this means converting wildcard expressions into concrete indices or aliases, but in the future other implementations could convert expressions based on different rules.
To prevent many overloading of methods, DocumentRequest extends now from IndicesRequest. All implementation of DocumentRequest already did implement IndicesRequest indirectly.
This allows the creation of the RPM artifact as part of the
maven package phase. The result of this is that we get checksum and
name correction for-free as it's all build an installed into the m2
repository. This also publishes the RPM together with .deb to the mvn
mirror.
Note: this will only build the RPM as part of the package phase if
`-Dpackage.rpm=true` since the binaries to build the RPM are not
availabel on all platforms.
Today we only clear search contexts for deleted indies. Yet, we should
do the same for closed indices to ensure they can be reopened quickly.
Closes#12116
A method for the new Script API were missing in the ValuesSourceMetricsAggregationBuilder. This change adds the missing method and deprecates the old Script API methods
When a node sends a shard started message to the master, the master goes through the routing table looking for the shard to start. At the moment we validate the indexUUID, the node the shard is assigned to and the fact that the shard is initializing. This check goes wrong if a relocating replica shard finishes recovery just at the moment the source node leaves the cluster. In this case the master will cancel the recovery and will likely assign a new initializing replica to the same target node. In this case the message from the relocation recovery can activate the new replica wrongfully.
Also, the logic for decided whether an incoming shard started message will be applied was split between ShardStateAction and the AllocationService.
This commit does the following:
1) Let ShardStateAction only filter basic stuff like index existence and indexUUID.
2) Move the trickier shard started matching logic to the AllocationService and make it stricter
3) Unify ShardStateAction filtering logic for both shard started and shard failed.
4) Add unit tests for all of the above.
For an example test failure see: http://build-us-00.elastic.co/job/es_core_16_centos/388/Closes#11999
Today everything is tight to having the next version as the latest.
In order to work towards 2.0.0.beta1 we need to fix all the usage of
2.0.0-SNAPSHOT to reflect the version we will release soon.
Usually we do this on the release branch but to simplify things I wanna
keep this on master for now and move to 2.1.0-SNAPSHOT on master once
we created a 2.0 branch.
Closes#12148
This information was stored with the snapshot but wasn't available on the interface. Knowing the version of elasticsearch that created the snapshot can be useful to determine the minimal version of the cluster that is required in order to restore this snapshot.
Closes#11980
This change fixes the plugin manager to trim `elasticsearch-` and `es-` prefixes from plugin names
for our official plugins. This restores the old behavior prior to #11805.
Closes#12143
Today it will remove all permissions and only set execute bit:
---x--x--x
Instead we should preserve existing permissions, and just add
read and execute to whatever is there.
Closes#12142
This change allows custom settings to be passed to the client for the external test cluster,
which is necessary when additional settings need to be passed to the client in order to
properly communicate with the external test cluster.
Before inner_hits existed named queries has support to also verify if inner queries of nested query matched with returned documents. This logic was broken and became obsolete from the moment inner hits get released. #10694 fixed named queries for nested docs in the top_hits agg, but it didn't fix the named query support for nested inner hits. This commit fixes that and on top of this also adds support for parent/child inner hits.
We allow setting the node's name a few different ways: the `name` system
property, the setting `name`, and the setting `node.name`. There is an order
of preference to these settings that gets applied, which can copy values from the
system property or `node.name` setting to the `name` setting. When setting
only `node.name` to one of the prompt placeholders, the user would be
prompted twice as the value of `node.name` is copied to `name` prior to
prompting for input. Additionally, the value entered by the user for `node.name`
would not be used and only the value entered for `name` would be used.
This fix changes the behavior to only prompt once when `node.name is set` and
`name` is not set. This is accomplished by waiting until all values have been
prompted and replaced, then the logic for determining the node's name is
executed.
Closes#11564
This commit adds support to retrieve fields when using the bulk update API. This functionality was previously available for the update API
but not for the bulk update API.
Closes#11527
Fixed documentation since the default rewrite method for fuzzy queries is to
select top terms, fixed usage of the fuzzy rewrite method, and removed unused
`rewrite` parameter.
Close#6932
This rewrite method is interesting because it computes scores as if all terms
had the same frequencies, which avoids disappointments with ranking when a fuzzy
query ranks typos first given that they are less frequent than the correct term.
Today shards are responsible for producing one sort value per document, which
is later used on the coordinating node to resolve the global top documents.
However, this is problematic on string fields with
`missing: _first, order: desc` or `missing: _last, order: asc` given that there
is no such thing as a string that compares greater than any other string. Today
we use a string containing a single code point which is the maximum allowed code
point but this is a hack: instead we should inform the coordinating node that
the document had no value and let it figure out how it should be sorted
depending on whether missing values should be sorted first or last.
Close#9155
Simplify and consolidate ShardRouting construction. Make sure that there is really only one place it gets created, when a shard is first created in unassigned state, and from there on, it is either copy constructed or built internally as a target for relocation.
This change helps make sure within our codebase data carries over by the ShardRouting is not lost as the shard goes through transitions, and can help simplify the addition of more data on it (like uuid).
For testing, a centralized TestShardRouting allows to create testable versions of ShardRouting, that are not needed to be as strict as the non test codebase. This can be cleanup more later on, but it is a good start.
closes#12125
This makes FuzzyQueryBuilder and Parser take an Object as a value using the
same logic as termQuery, so that numbers, dates or Strings would be properly
handled.
Relates #11865Closes#12020
This converts the tracking of jars and classes in JarHell to use
Path objects, instead of URL. This makes for nicer printing
of the underlying path when an error does occur.
This commit defaults fuzzy_transpositions on fuzzy queries to true. This means that by default, tranpositions will now count as a single
edit.
Closes#9278
the failure type. This change marks the engine as corrupted only when the failure
is caused by an actual index corrruption. When an engine is failed for other
reasons, the engine is only closed without removing the shard state.
closes#11788
Plugin Manager can now use another simplified form when a user wants to install an official plugin hosted at elasticsearch download service.
The form we use is:
```sh
bin/plugin install pluginname
```
As plugins share now the same version as elasticsearch, we can automatically guess what is the exact current version of the plugin manager script.
Also, download service will now use `/org.elasticsearch.plugins/pluginName/pluginName-version.zip` URL path to download a plugin.
If the older form is provided (`user/plugin/version` or `user/plugin`), we will still use:
* elasticsearch download service at `/user/plugin/plugin-version.zip`
* maven central with groupIp=user, artifactId=plugin and version=version
* github with user=user, repoName=plugin and tag=version
* github with user=user, repoName=plugin and branch=master if no version is set
Note that community plugin providers can use other download services by using `--url` option.
If you try to use the new form with a non core elasticsearch plugin, the plugin manager will reject
it and will give you all known core plugins.
```
Usage:
-u, --url [plugin location] : Set exact URL to download the plugin from
-i, --install [plugin name] : Downloads and installs listed plugins [*]
-t, --timeout [duration] : Timeout setting: 30s, 1m, 1h... (infinite by default)
-r, --remove [plugin name] : Removes listed plugins
-l, --list : List installed plugins
-v, --verbose : Prints verbose messages
-s, --silent : Run in silent mode
-h, --help : Prints this help message
[*] Plugin name could be:
elasticsearch-plugin-name for Elasticsearch 2.0 Core plugin (download from download.elastic.co)
elasticsearch/plugin/version for elasticsearch commercial plugins (download from download.elastic.co)
groupId/artifactId/version for community plugins (download from maven central or oss sonatype)
username/repository for site plugins (download from github master)
Elasticsearch Core plugins:
- elasticsearch-analysis-icu
- elasticsearch-analysis-kuromoji
- elasticsearch-analysis-phonetic
- elasticsearch-analysis-smartcn
- elasticsearch-analysis-stempel
- elasticsearch-cloud-aws
- elasticsearch-cloud-azure
- elasticsearch-cloud-gce
- elasticsearch-delete-by-query
- elasticsearch-lang-javascript
- elasticsearch-lang-python
```
AbstractFieldMapper is the only direct base class of FieldMapper.
This change moves all AbstractFieldMapper functionality into
FieldMapper, since there is no need for 2 levels of abstraction.
Each scroll on a scan causes a query to be executed. This commit adds support for these indirect queries to count against the search stats.
Additionally, this commit adds three new search stats: scroll_count, scroll_time_in_millis, and scroll_current. scroll_count tracks the
number of completed scrolls. scroll_time_in_millis tracks the total time that scrolls were held open. scroll_current tracks the number of
scrolls currently open.
Closes#9109
In testing infra, one can simulate node GCs, network issues and other problems by adding a disruption to the test cluster. Those disruption are automatically removed after the test is done. At the moment each disruption indicates how long it will take the cluster to heal once the disruption is removed and the test cluster waits for this amount of time. However, more often than not this is an upper bound, causing a much longer wait than needed. Instead we should push the responsibility of healing to the disruption it self, where we can be smarter about what we wait for.
Closes#12071
When using `awaitBusy`, sometimes, you might not want to double time between two runs in an infinitive manner.
For example, let's say it will probably take 30 seconds to run a test.
When doubling all the time, you will most likely wait for a bigger time than needed:
|iteration|ms |s |duration (ms)|duration (s)|
|-----------|-------------|-----------|-----------|-----------|
|1|1|0,001|1|0,001|
|2|2|0,002|3|0,003|
|3|4|0,004|7|0,007|
|4|8|0,008|15|0,015|
|5|16|0,016|31|0,031|
|6|32|0,032|63|0,063|
|7|64|0,064|127|0,127|
|8|128|0,128|255|0,255|
|9|256|0,256|511|0,511|
|10|512|0,512|1023|1,023|
|11|1024|1,024|2047|2,047|
|12|2048|2,048|4095|4,095|
|13|4096|4,096|8191|8,191|
|14|8192|8,192|16383|16,383|
|15|16384|16,384|32767|32,767|
|16|32768|32,768|65535|65,535|
|17|65536|65,536|131071|131,071|
|18|131072|131,072|262143|262,143|
|19|262144|262,144|524287|524,287|
|20|524288|524,288|1048575|1048,575|
|21|1048576|1048,576|2097151|2097,151|
For example here, if the task is successful after 35 seconds, we will most likely have to wait for 32s more before the Predicate is run again.
With this patch, the maximum sleep time is now set to 1 second.
This pipeline aggregation runs a script on each bucket in the parent aggregation to determine whether the bucket is kept in the final aggregation tree. If the script returns true the bucket is retained, if it returns false the bucket is dropped
If you are using the default date or the named identifiers of dates,
the current implementation was allowed to read a year with only one
digit. In order to make this more strict, this fixes a year to be at
least 4 digits. Same applies for month, day, hour, minute, seconds.
Also the new default is `strictDateOptionalTime` for indices created
with Elasticsearch 2.0 or newer.
In addition a couple of not exposed date formats have been exposed, as they
have been mentioned in the documentation.
Closes#6158
Field names containing dots can cause problems. For example, @jpountz
made this recreation which cause no error, but can result in a
serialization exception if the type already exists:
https://gist.github.com/jpountz/8c66817e00a322b81f85
But this is not just a potential conflict. It also has larger problems,
since only the leaf mapper is created. The intermediate "foo" object
field would not exist if only "foo.bar" was in the mappings.
This change forbids the use of dots in field names. It also
fixes an issue with passing through the update_all_types setting,
which was always set to true whenever a type already existed (!).
I do not think we should worry about backwards compatibility here. This
should be a hard break (and added to the migration plugin).
This commit adds logic to prefer shards with higher priority
or from newer indicse to be allocated first if they are unallocated post API.
This commit allows users to set `index.priority` to a non-negative integer to
prioritize index recovery for certain indices. This setting is dynamically updateable
and defaults to `0`. If two indices have the same priority this change takes the creation
date into account to prioritize shards from newer indices which is important in the time-based
indices usecase.
Closes#11787
When a bulk request fails on a Delete or Update request, the BulkItemResponse
reports incorrect "index" operation in the response. This PR fixes this
for the case of closed indices as reported in #9821 but also for
other failures and adds tests for the two cases covered.
Closes#9821
the specialization can cause stack overflows if an exception is a
ElasticsearchWrapperException as well as a ElasticsearchException.
This commit just relies on the unwrap logic now to find the cause and only
renders if we the rendering exception is the cause otherwise forwards
to the generic exception rendering.
Closes#11994
While MappedFieldType contains settings for doc values and fielddata,
AbstractFieldMapper had special logic in its constructor that
required setting these on the field type from there. This change
removes those settings from the AbstractFieldMapper constructor.
As a result, defaultDocValues(), defaultFieldType() and
defaultFieldDataType() are no longer needed.
This commit merges the pre-existing special exception that
allowed to associate headers with exceptions and the elasticsaerch
base class `ElasticsearchException` This allows for more generic use
of exceptions where plugins can associate meta-data with any elasticsearch
base exception to control behavior etc.
This also addds a generic SecurityException to allow plugins to pass on
information based on the RestStatus.
If the version of a node is lower than the minimum supported version or higher than the maximum supported version, a node shouldn't be allowed to join and nodes should join that elected master node
Closes#11924
Removed ParseField#match variant that accepts the field name only, without parse flags. Such a method is harmful as it defaults to empty parse flags, meaning that no deprecation exceptions will be thrown in strict mode, which defeats the purpose of using ParseField. Unfortunately such a method was used in a lot of places were the parse flags weren't easily accessible (outside of query parsing), and in a lot of other places just by mistake.
Parse flags have been introduced now as part of SearchContext and mappers where needed. There are a few places (e.g. java api requests) where it is not possible to retrieve them as they depend on the index settings, in that case we explicitly pass in EMPTY_FLAGS for now, but this has to be seen as an exception.
Closes#11859
This commit changes MessageChannelHandler to not skip the underlying
ChannelBuffer while a StreamInput is open on top of it. In case eg. compression
is enabled, this prevents failures due to the fact that the decompressed
stream input expects a certain structure that it can't verify if the position
of the underlying buffer is changed.
Added dynamic arguments to `ElasticsearchException`, `ElasticsearchParseException` and `ElasticsearchTimeoutException`.
This helps keeping the exception messages clean and readable and promotes consistency around wrapping dynamic args with `[` and `]`.
This is just the start, we need to propagate this to all exceptions deriving from `ElasticsearchException`. Also, work started on standardizing on lower case logging & exception messages. We need to be consistent here...
- Uses the same `LoggerMessageFormat` as used by our logging infrastructure.
The work around for resolving `now` doesn't need to be used for aliases, becuase alias filters are parsed at search time. However it can't be removed, because the percolator relies on it.
Parent/child can be specified again in alias filters, this now works again because alias filters are parsed at search time. Parent/child will also use the late query parse work around, to make sure to do the final preparations when the search context is around. This allows the aliases api to validate the parent/child queries without failing because there is no search context.
Closes#10485
Eventually, the field type should not need any names, because there
will be only one name which leads to finding it (the full name, which is
also the index name). However, the short or "simple" name (using java
terminology for class names) is needed just in a couple places, for
serialization.
This change moves the simple name out of MappedFieldType.Names, into
Mapper, and makes Mapper and FieldMapper abstract classes.
Today we loose the RestStatus code for non-serializable exceptions.
This can be tricky if they are supposed to signal certain situations
like authentication errors etc. This commit adds support for carrying on
the exceptions in the NotSerializableExceptoinWrapper
The filters aggregation now has an option to add an 'other' bucket which will, when turned on, contain all documents which do not match any of the defined filters. There is also an option to change the name of the 'other' bucket from the default of '_other_'
Closes#11289
This change means that when the skip gap policy is used, the bucket script aggregation will skip executing the script on a bucket if any of the required bucket_paths are missing for the bucket. No aggregation will be added to the bucket, and the aggregation will move to the next bucket.
This commit changes the postrm script so that it prints error messages instead of failing & exiting when the deletion of a directory failed while removing a RPM/DEB package.
Closes#11373
This allows a lot of null checks to be removed where we were always falling back to the ValueFormat.RAW anyway. Now the format is set to ValueFormat.RAW when no alternative is suitable.
Closes#10594
Field stats index constraints allows to omit all field stats for indices that don't match with the constraint. An index
constraint can exclude indices' field stats based on the `min_value` and `max_value` statistic. This option is only
useful if the `level` option is set to `indices`.
For example index constraints can be useful to find out the min and max value of a particular property of your data in
a time based scenario. The following request only returns field stats for the `answer_count` property for indices
holding questions created in the year 2014:
curl -XPOST 'http://localhost:9200/_field_stats?level=indices' -d '{
"fields" : ["answer_count"] <1>
"index_constraints" : { <2>
"creation_date" : { <3>
"min_value" : { <4>
"gte" : "2014-01-01T00:00:00.000Z",
},
"max_value" : {
"lt" : "2015-01-01T00:00:00.000Z"
}
}
}
}'
Closes#11187
"Root" is a very confusing term for meta field mappers. This change
renames "RootMapper" to "MetadataFieldMapper" and simplifies
how metadata mappers are setup.
It also requires that metadata mappers are now a FieldMapper
(MetadataFieldMapper extends from AbstractFieldMapper). The only
use of a root mapper that wasn't a field mapper was the theoretical
"external" root mapper (just a test mapper). But it doesn't make
sense to not have an actual field, and this falls inline with
the hopefully eventual collapsing of AbstractFieldMapper/FieldMapper/Mapper.
- shard listing actions underpinning shard allocation do not have access to that new node yet (causing errors during shard allocation see #11923
- the very first cluster state published to a node already has shard assignments to it. This surfaced other issues we are working to fix separately
This commit changes the reroute to be done post processing the initial join cluster state to side step these issues while we work on a longer term solution.
Closes#11960
We had several problems with Java Serializatin in the past. At some point
in the Java 1.7.x series JDKs where not compatible anymore when java
serialization (ObjectStream) was used to exchange objects. In elasticsearch
we used this to serialize exceptions across the wire which caused several problems
with incompatible JDKs. While causing lot of trouble this essentially prevented
users from moving forward and upgrade their JVMs. To prevent these kind of issues
this commit removes the dependency on java serialization entirely and bans the
usage of ObjectOutputStream and ObjectInputStream entirely.
Yet, we can't fully serialize all exception anymore such that this commit
is best effort and adds hand written serialization to all elasticsearch exceptions
as well to a selected set of JDK and Lucene exceptions. (see StreamOutput#writeThrowable /
StreamInput.readThrowable). Stacktraces should be preserved for all exceptions while
several names might be replaced with ElasticsearchException if there is no mapping for
the given exception.
In order to support older RPM based distributions like CentOS5,
we should have one RPM available, which is not signed.
This commit creates an unsigned RPM first, then moves it over to
target/releases during the build, then builds a signed RPM.
The unsigned one is uploaded via S3, where as the signed one is
used for the repositories.
In addition, you can now build an RPM without having to specify
any gpg credentials due to offloading this into a maven profile
that is only activated when specifying `rpm.sign` property.
Closes#11587
instead of maintaining a thread local cache in the PercolatorQueriesRegistry.
Before PercolatorQueriesRegistry had its own cache, because all the queries had to forcefully opt out of caching. Nowadays in master small segments are never cached by the query cache, so the reason for the dedicated cache is no longer valid.
Today we keep track of how often filters are used at the index level in order
to decide whether they should be cached or not. This is an issue if you have
several shards of the same index on the same node as it will multiply statistics
by the number of shards that you have for this index on the node, which defeats
the purpose of waiting for a filter to be reused before caching them.
If the translog UUID is corrupted we should not convert it
to UTF-8 since it might be invalid. Instead we should compare
the UTF-8 byte representation directly.
Zachary Tong
Michael McCandless
Alex Ksikes
Lee Hinman
Boaz Leskes
Martijn van Groningen
Adrien Grand
Jason Tedor
Igor Motov
Jay Modi
Simon Willnauer
jaymode
Simon Willnauer
Shay Banon
Robert Muir
Colin Goodheart-Smithe
uboness
Alexander Reelsen
aleph-zero
Jack Conradson
szroland
David Pilato
Ryan Ernst
Israel Ekpo
William Webber
Tanguy Leroux
Areek Zillur
Robert Muir
Christoph Büscher
markharwood
javanna
Britta Weber