This commit addresses a race that can happen in the basic CCR stats REST
tests. Namely, peek reads can fire before the REST test client fires the
stats request. This means that we have to weaken our assertions about
the expected stats response.
This commit adds the ML results classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the config classes and stats classes.)
These classes:
- Are publically immutable
- Are privately mutable - this is perhaps not as nice as the
config classes, but to do otherwise would require adding
builders and the corresponding server-side classes that the
old transport client used don't have builders
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names and getter names as the corresponding
classes in X-Pack core to ease migration for transport client
users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
This commit adds four ML config classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
This commit splits SecurityNetty4TransportTests in two methods
one handling verification mode certificate and full and one
handling verification mode none. This is done so that the second
method can be muted in a FIPS 140 JVM where verification mode none
cannot be used.
Same motivation as #32507 but for the DateHistogramGroupConfig
configuration object. This pull request also changes the format of the
time zone from a Joda's DateTimeZone to a simple String.
It should help to port the API to the high level rest client and allows
clients to not be forced to use the Joda Time library. Serialization is
impacted but does not need a backward compatibility layer as
DateTimeZone are serialized as String anyway. XContent also expects
a String for timezone, so I found it easier to move everything to String.
Related to #29827
This commit adds the Detector class and its dependencies to the
X-Pack protocol library used by the high level REST client.
(Future commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable, with builders, but the builders do no validation
beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
* master:
HLRC: Move commercial clients from XPackClient (#32596)
Add cluster UUID to Cluster Stats API response (#32206)
Security: move User to protocol project (#32367)
[TEST] Test for shard failures, add debug to testProfileMatchesRegular
Minor fix for javadoc (applicable for java 11). (#32573)
Painless: Move Some Lookup Logic to PainlessLookup (#32565)
TEST: Avoid merges in testSeqNoAndCheckpoints
[Rollup] Remove builders from HistoGroupConfig (#32533)
Mutes failing SQL string function tests due to #32589
fixed elements in array of produced terms (#32519)
INGEST: Enable default pipelines (#32286)
Remove cluster state initial customs (#32501)
Mutes LicensingDocumentationIT due to #32580
[ML] Remove multiple_bucket_spans (#32496)
[ML] Rename JobProvider to JobResultsProvider (#32551)
Correct minor typo in explain.asciidoc for HLRC
Build: Add elastic maven to repos used by BuildPlugin (#32549)
Clarify the error message when a pipeline agg is used in the 'order' parameter. (#32522)
Revert "[test] turn on host io cache for opensuse (#32053)"
Enable packaging tests on suse boxes
[ML] Improve error when no available field exists for rule scope (#32550)
[ML] Improve error for functions with limited rule condition support (#32548)
Painless: Clean Up PainlessField (#32525)
Add @AwaitsFix for #32554
Remove broken @link in Javadoc
Scripting: Conditionally use java time api in scripting (#31441)
[ML] Fix thread leak when waiting for job flush (#32196) (#32541)
Add AwaitsFix to failing test - see #32546
Core: Minor size reduction for AbstractComponent (#32509)
SQL: Added support for string manipulating functions with more than one parameter (#32356)
[DOCS] Reloadable Secure Settings (#31713)
Watcher: Reenable HttpSecretsIntegrationTests#testWebhookAction test (#32456)
[Rollup] Remove builders from TermsGroupConfig (#32507)
Use hostname instead of IP with SPNEGO test (#32514)
Switch x-pack rolling restart to new style Requests (#32339)
NETWORKING: Fix Netty Leaks by upgrading to 4.1.28 (#32511)
[DOCS] Small fixes in rule configuration page (#32516)
Painless: Clean up PainlessMethod (#32476)
Build: Remove shadowing from benchmarks (#32475)
Docs: Add all JDKs to CONTRIBUTING.md
Add licensing enforcement for FIPS mode (#32437)
SQL: Add test for handling of partial results (#32474)
Mute testFilterCacheStats
[ML][DOCS] Fix typo applied_to => applies_to
Scripting: Fix painless compiler loader to know about context classes (#32385)
For a new feature like CCR we will go without this extra layer of
indirection. This commit replaces all /_xpack/ccr/_(\S+) endpoints by
/_ccr/$1 endpoints.
* Make cluster stats response contain cluster UUID
* Updating constructor usage in Monitoring tests
* Adding cluster_uuid field to Cluster Stats API reference doc
* Adding rest api spec test for expecting cluster_uuid in cluster stats response
* Adding missing newline
* Indenting do section properly
* Missed a spot!
* Fixing the test cluster ID
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
This commit removes the never released multiple_bucket_spans
configuration parameter. This is now replaced with the new
multibucket feature that requires no configuration.
Added support for string manipulating functions with more than one parameter:
CONCAT, LEFT, RIGHT, REPEAT, POSITION, LOCATE, REPLACE, SUBSTRING, INSERT
The error message mentioned in #30094 does not link to to a cause by the
test itself, as there are still inflight requests according to the
circuit breaker.
I ran this test class 100k times on bare metal and could not reproduce
it. I will reenable the test for now.
Closes#30094
While working on adding the Create Rollup Job API to the
high level REST client (#29827), I noticed that the configuration
objects like TermsGroupConfig rely on the Builder pattern in
order to create or parse instances. These builders are doing
some validation but the same validation could be done within
the constructor itself or on the server side when appropriate.
This commit removes the builder for TermsGroupConfig,
removes some other methods that I consider not really usefull
once the TermsGroupConfig object will be exposed in the
high level REST client. It also simplifies the parsing logic.
Related to #29827
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:rolling-upgrade*` projects to use
the new versions.
* Upgrade to `4.1.28` since the problem reported in #32487 is a bug in Netty itself (see https://github.com/netty/netty/issues/7337)
* Fixed other leaks in test code that now showed up due to fixes improvements in leak reporting in the newer version
* Needed to extend permissions for netty common package because it now sets a classloader at runtime after changes in 63bae0956a
* Adjusted forbidden APIs check accordingly
* Closes#32487
This commit adds licensing enforcement for FIPS mode through the use of
a bootstrap check, a node join validator, and a check in the license
service. The work done here is based on the current implementation of
the TLS enforcement with a production license.
The bootstrap check is always enforced since we need to enforce the
licensing and this is the best option to do so at the present time.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
This commit adds an assumption to two test methods in
SSLTrustRestrictionsTests that we are not on JDK 11 as the tests
currently fail there.
Relates #29989
This commit removes Kerberos bootstrap checks as they were more
validation checks and better done in Kerberos realm constructor
than as bootstrap checks. This also moves the check
for one Kerberos realm per node to where we initialize realms.
This commit adds few validations which were missing earlier
like missing read permissions on keytab file or if it is directory
to throw exception with error message.
Today ShardFollowNodeTask might fetch some operations more than once.
This happens because we ask the leading for up to max_batch_count
operations (instead of the left-over size) for the left-over request.
The leading then can freely respond up to the max_batch_count, and at
the same time, if one of the previous requests completed, we might issue
another read request whose range overlaps with the response of the
left-over request.
Closes#32453
The default behaviour for "GetPrivileges" is to get all application
privileges. This should only be allowed if the user has access to
the "*" application.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/plugin/security` project to use the new
versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/security-example-spi-extension`
project to use the new versions.
* master:
Tests: Fix convert error tests to use fixed value (#32415)
IndicesClusterStateService should replace an init. replica with an init. primary with the same aId (#32374)
REST high-level client: parse back _ignored meta field (#32362)
[CI] Mute DocumentSubsetReaderTests testSearch
Today we do not check if the `following_index` setting of the follower
is enabled or not when processing a follow-request. If that setting is
disabled, the follower will use the default engine, not the following
engine. This change checks and rejects such invalid follow requests.
Relates #30086
* master:
Remove reference to non-existent store type (#32418)
[TEST] Mute failing FlushIT test
Fix ordering of bootstrap checks in docs (#32417)
[TEST] Mute failing InternalEngineTests#testSeqNoAndCheckpoints
[TEST] Mute failing testConvertLongHexError
bump lucene version after backport
Upgrade to Lucene-7.5.0-snapshot-608f0277b0 (#32390)
[Kerberos] Avoid vagrant update on precommit (#32416)
TESTS: Move netty leak detection to paranoid level (#32354)
[DOCS] Fixes formatting of scope object in job resource
Copy missing segment attributes in getSegmentInfo (#32396)
AbstractQueryTestCase should run without type less often (#28936)
INGEST: Fix Deprecation Warning in Script Proc. (#32407)
Switch x-pack/plugin to new style Requests (#32327)
Docs: Correcting a typo in tophits (#32359)
Build: Stop double generating buildSrc pom (#32408)
TEST: Avoid triggering merges in FlushIT
Fix missing JavaDoc for @throws in several places in KerberosTicketValidator.
Switch x-pack full restart to new style Requests (#32294)
Release requests in cors handler (#32364)
Painless: Clean Up PainlessClass Variables (#32380)
Docs: Fix callouts in put license HL REST docs (#32363)
[ML] Consistent pattern for strict/lenient parser names (#32399)
Update update-settings.asciidoc (#31378)
Remove some dead code (#31993)
Introduce index store plugins (#32375)
Rank-Eval: Reduce scope of an unchecked supression
Make sure _forcemerge respects `max_num_segments`. (#32291)
TESTS: Fix Buf Leaks in HttpReadWriteHandlerTests (#32377)
Only enforce password hashing check if FIPS enabled (#32383)
Today it's possible to encounter an Index operation in Lucene whose
_source is disabled, and _recovery_source was pruned by the MergePolicy.
If it's the case, we create a Translog#Index without source and let the
caller validate it later. However, this approach is challenging for the
caller.
Deletes and No-Ops don't allow invoking "source()" method. The caller
has to make sure to call "source()" only on index operations. The
current implementation in CCR does not follow this and fail to replica
deletes or no-ops. Moreover, it's easier to reason if a Translog#Index
always has the source.
The main highlight is the removal of the reclaim_deletes_weight in the TieredMergePolicy.
The es setting index.merge.policy.reclaim_deletes_weight is deprecated in this commit and the value is ignored. The new merge policy setting setDeletesPctAllowed should be added in a follow up.
This commit avoids dependency during compile on copy keytab to
be present in the generated sources so pre-commit does not
stall for updating vagrant box.
Closes#32387
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/plugin` project to use the new versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:full-cluster-restart` project to use
the new versions.
Previously we had two patterns for naming of strict
and lenient parsers.
Some classes had CONFIG_PARSER and METADATA_PARSER,
and used an enum to pass the parser type to nested
parsers.
Other classes had STRICT_PARSER and LENIENT_PARSER
and used ternary operators to pass the parser type
to nested parsers.
This change makes all ML classes use the second of
the patterns described above.
Removing some dead code or supressing warnings where apropriate. Most of the
time the variable tested for null is dereferenced earlier or never used before.
Today we allow plugins to add index store implementations yet we are not
doing this in our new way of managing plugins as pull versus push. That
is, today we still allow plugins to push index store providers via an on
index module call where they can turn around and add an index
store. Aside from being inconsistent with how we manage plugins today
where we would look to pull such implementations from plugins at node
creation time, it also means that we do not know at a top-level (for
example, in the indices service) which index stores are available. This
commit addresses this by adding a dedicated plugin type for index store
plugins, removing the index module hook for adding index stores, and by
aggregating these into the top-level of the indices service.
* master:
[DOCS] Fix formatting error in Slack action
Painless: Fix documentation links to use existing refs (#32335)
Painless: Decouple PainlessLookupBuilder and Whitelists (#32346)
[DOCS] Adds recommendation for xpack.security.enabled (#32345)
[TEST] Mute ConvertProcessortTests.testConvertIntHexError
[TEST] Fix failure due to exception message in java11 (#32321)
[DOCS] Fixes typo in ML aggregations page
[DOCS] Adds link from bucket_span property to common time units
[ML][DOCS] Add documentation for detector rules and filters (#32013)
Add opaque_id to index audit logging (#32260)
Add 6.5.0 version to master
fixes broken build for third-party-tests (#32353)
Java 11 uses more verbose exceptions messages, causing this assertion
to fail. Changed the test to be less restrictive and only look
for the classes we care about.
* master:
Security: revert to old way of merging automata (#32254)
Networking: Fix test leaking buffer (#32296)
Undo a debugging change that snuck in during the field aliases merge.
Painless: Update More Methods to New Naming Scheme (#32305)
[TEST] Fix assumeFalse -> assumeTrue in SSLReloadIntegTests
Ingest: Support integer and long hex values in convert (#32213)
Introduce fips_mode setting and associated checks (#32326)
Add V_6_3_3 version constant
[DOCS] Removed extraneous callout number.
Rest HL client: Add put license action (#32214)
Add ERR to ranking evaluation documentation (#32314)
Introduce Application Privileges with support for Kibana RBAC (#32309)
Build: Shadow x-pack:protocol into x-pack:plugin:core (#32240)
[Kerberos] Add Kerberos authentication support (#32263)
[ML] Extract persistent task methods from MlMetadata (#32319)
Add Restore Snapshot High Level REST API
Register ERR metric with NamedXContentRegistry (#32320)
fixes broken build for third-party-tests (#32315)
Allow Integ Tests to run in a FIPS-140 JVM (#31989)
[DOCS] Rollup Caps API incorrectly mentions GET Jobs API (#32280)
awaitsfix testRandomClusterStateUpdates
[TEST] add version skip to weighted_avg tests
Consistent encoder names (#29492)
Add WeightedAvg metric aggregation (#31037)
Switch monitoring to new style Requests (#32255)
Rename ranking evaluation `quality_level` to `metric_score` (#32168)
Fix a test bug around nested aggregations and field aliases. (#32287)
Add new permission for JDK11 to load JAAS libraries (#32132)
Silence SSL reload test that fails on JDK 11
[test] package pre-install java check (#32259)
specify subdirs of lib, bin, modules in package (#32253)
Switch x-pack:core to new style Requests (#32252)
awaitsfix SSLConfigurationReloaderTests
Painless: Clean up add methods in PainlessLookup (#32258)
Fail shard if IndexShard#storeStats runs into an IOException (#32241)
AwaitsFix RecoveryIT#testHistoryUUIDIsGenerated
Remove unnecessary warning supressions (#32250)
CCE when re-throwing "shard not available" exception in TransportShardMultiGetAction (#32185)
Add new fields to monitoring template for Beats state (#32085)
This commit reverts to the pre-6.3 way of merging automata as the
change in 6.3 significantly impacts the performance for roles with a
large number of concrete indices. In addition, the maximum number of
states for security automata has been increased to 100,000 in order
to allow users to use roles that caused problems pre-6.3 and 6.3 fixed.
As an escape hatch, the maximum number of states is configurable with
a setting so that users with complex patterns in roles can increase
the states with the knowledge that there is more memory usage.
* Introduce fips_mode setting and associated checks
Introduce xpack.security.fips_mode.enabled setting ( default false)
When it is set to true, a number of Bootstrap checks are performed:
- Check that Secure Settings are of the latest version (3)
- Check that no JKS keystores are configured
- Check that compliant algorithms ( PBKDF2 family ) are used for
password hashing
In the HL REST client we replace the License object with a string, because of
complexity of this class. It is also not really needed on the client side since
end-users are not interacting with the license besides passing it as a string
to the server.
Relates #29827
This commit introduces "Application Privileges" to the X-Pack security
model.
Application Privileges are managed within Elasticsearch, and can be
tested with the _has_privileges API, but do not grant access to any
actions or resources within Elasticsearch. Their purpose is to allow
applications outside of Elasticsearch to represent and store their own
privileges model within Elasticsearch roles.
Access to manage application privileges is handled in a new way that
grants permission to specific application names only. This lays the
foundation for more OLS on cluster privileges, which is implemented by
allowing a cluster permission to inspect not just the action being
executed, but also the request to which the action is applied.
To support this, a "conditional cluster privilege" is introduced, which
is like the existing cluster privilege, except that it has a Predicate
over the request as well as over the action name.
Specifically, this adds
- GET/PUT/DELETE actions for defining application level privileges
- application privileges in role definitions
- application privileges in the has_privileges API
- changes to the cluster permission class to support checking of request
objects
- a new "global" element on role definition to provide cluster object
level security (only for manage application privileges)
- changes to `kibana_user`, `kibana_dashboard_only_user` and
`kibana_system` roles to use and manage application privileges
Closes#29820Closes#31559
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.
Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.
Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.
Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
This commit adds support for Kerberos authentication with a platinum
license. Kerberos authentication support relies on SPNEGO, which is
triggered by challenging clients with a 401 response with the
`WWW-Authenticate: Negotiate` header. A SPNEGO client will then provide
a Kerberos ticket in the `Authorization` header. The tickets are
validated using Java's built-in GSS support. The JVM uses a vm wide
configuration for Kerberos, so there can be only one Kerberos realm.
This is enforced by a bootstrap check that also enforces the existence
of the keytab file.
In many cases a fallback authentication mechanism is needed when SPNEGO
authentication is not available. In order to support this, the
DefaultAuthenticationFailureHandler now takes a list of failure response
headers. For example, one realm can provide a
`WWW-Authenticate: Negotiate` header as its default and another could
provide `WWW-Authenticate: Basic` to indicate to the client that basic
authentication can be used in place of SPNEGO.
In order to test Kerberos, unit tests are run against an in-memory KDC
that is backed by an in-memory ldap server. A QA project has also been
added to test against an actual KDC, which is provided by the krb5kdc
fixture.
Closes#30243
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
Adds a new single-value metrics aggregation that computes the weighted
average of numeric values that are extracted from the aggregated
documents. These values can be extracted from specific numeric
fields in the documents.
When calculating a regular average, each datapoint has an equal "weight"; it
contributes equally to the final value. In contrast, weighted averages
scale each datapoint differently. The amount that each datapoint contributes
to the final value is extracted from the document, or provided by a script.
As a formula, a weighted average is the `∑(value * weight) / ∑(weight)`
A regular average can be thought of as a weighted average where every value has
an implicit weight of `1`.
Closes#15731
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/plugin/monitoring` project to use the new
versions.
The notion of "quality" is an overloaded term in the search ranking evaluation
context. Its usually used to decribe certain levels of "good" vs. "bad" of a
seach result with respect to the users information need. We currently report the
result of the ranking evaluation as `quality_level` which is a bit missleading.
This changes the response parameter name to `metric_score` which fits better.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:core` project to use the new versions.
New data is reported from Beats to the monitoring endpoint. This PR adds the template change necessary for it. See https://github.com/elastic/beats/issues/7521 for more details.
Queue data is skipped for now as implementation is not finished yet.
Today we consider a read request is exhausted if from_seqno is equal to
or greater than the max_required_seqno. However, if we stop when
from_seqno equals to the max_required_seqno, we will miss an operation
whose seqno is max_required_seqno because we have not seen that
operation yet.
* es/master: (23 commits)
Switch full-cluster-restart to new style Requests (#32140)
[DOCS] Clarified that you must remove X-Pack plugin when upgrading from pre-6.3. (#32016)
Remove BouncyCastle dependency from runtime (#32193)
INGEST: Extend KV Processor (#31789) (#32232)
INGEST: Make a few Processors callable by Painless (#32170)
Add region ISO code to GeoIP Ingest plugin (#31669)
[Tests] Remove QueryStringQueryBuilderTests#toQuery class assertions (#32236)
Make sure that field aliases count towards the total fields limit. (#32222)
Switch rolling restart to new style Requests (#32147)
muting failing test for internal auto date histogram to avoid failure before fix is merged
MINOR: Remove unused `IndexDynamicSettings` (#32237)
Fix multi level nested sort (#32204)
Enhance Parent circuit breaker error message (#32056)
[ML] Use default request durability for .ml-state index (#32233)
Remove indices stats timeout from monitoring docs
Rename ranking evaluation response section (#32166)
Dependencies: Upgrade to joda time 2.10 (#32160)
Remove aliases resolution limitations when security is enabled (#31952)
Ensure that field aliases cannot be used in multi-fields. (#32219)
TESTS: Check for Netty resource leaks (#31861)
...
We modified the way we calculate to_seqno in #32121 but did not adjust
this test accordingly. If min_seqno equals to max_seqno, the size should be
one instead of zero.
Relates #32121
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
The initial decision to use async durability was made a long time ago
for performance reasons. That argument no longer applies and we
prefer the safety of request durability.
Normally translog operations will not be replayed on the primary.
Following engine is an exception where we replay translog on both
primary and replica as a non-primary strategy. Even though we won't use
the version_type in the following engine, we still need to pass a valid
value for the primary operation in order not to trip assertions in an
engine.
This commit passes version_type EXTERNAL for translog operation if its
origin is primary.
Relates #31945
The added tests are based on specific scenarios as described in the test plan.
Before this change the ShardFollowNodeTaskTests contained more random like tests,
but these have been removed and in a followup pr better random tests will
be added in a new test class as is described in the test plan.
Resolving wildcards in aliases expression is challenging as we may end
up with no aliases to replace the original expression with, but if we
replace with an empty array that means _all which is quite the opposite.
Now that we support and serialize the original requested aliases,
whenever aliases are replaced we will be able to know what was
initially requested. `MetaData#findAliases` can then be updated to not
return anything in case it gets empty aliases, but the original aliases
were not empty. That means that empty aliases are interpreted as _all
only if they were originally requested that way.
Relates to #31516
* master:
Painless: Simplify Naming in Lookup Package (#32177)
Handle missing values in painless (#32207)
add support for write index resolution when creating/updating documents (#31520)
ECS Task IAM profile credentials ignored in repository-s3 plugin (#31864)
Remove indication of future multi-homing support (#32187)
Rest test - allow for snapshots to take 0 milliseconds
Make x-pack-core generate a pom file
Rest HL client: Add put watch action (#32026)
Build: Remove pom generation for plugin zip files (#32180)
Fix comments causing errors with Java 11
Fix rollup on date fields that don't support epoch_millis (#31890)
Detect and prevent configuration that triggers a Gradle bug (#31912)
[test] port linux package packaging tests (#31943)
Revert "Introduce a Hashing Processor (#31087)" (#32178)
Remove empty @return from JavaDoc
Adjust SSLDriver behavior for JDK11 changes (#32145)
[test] use randomized runner in packaging tests (#32109)
Add support for field aliases. (#32172)
Painless: Fix caching bug and clean up addPainlessClass. (#32142)
Call setReferences() on custom referring tokenfilters in _analyze (#32157)
Fix BwC Tests looking for UUID Pre 6.4 (#32158)
Improve docs for search preferences (#32159)
use before instead of onOrBefore
Add more contexts to painless execute api (#30511)
Add EC2 credential test for repository-s3 (#31918)
A replica can be promoted and started in one cluster state update (#32042)
Fix Java 11 javadoc compile problem
Fix CP for namingConventions when gradle home has spaces (#31914)
Fix `range` queries on `_type` field for singe type indices (#31756)
[DOCS] Update TLS on Docker for 6.3 (#32114)
ESIndexLevelReplicationTestCase doesn't support replicated failures but it's good to know what they are
Remove versionType from translog (#31945)
Switch distribution to new style Requests (#30595)
Build: Skip jar tests if jar disabled
Painless: Add PainlessClassBuilder (#32141)
Build: Make additional test deps of check (#32015)
Disable C2 from using AVX-512 on JDK 10 (#32138)
Build: Move shadow customizations into common code (#32014)
Painless: Fix Bug with Duplicate PainlessClasses (#32110)
Remove empty @param from Javadoc
Re-disable packaging tests on suse boxes
Docs: Fix missing example script quote (#32010)
[ML] Wait for aliases in multi-node tests (#32086)
[ML] Move analyzer dependencies out of categorization config (#32123)
Ensure to release translog snapshot in primary-replica resync (#32045)
Handle TokenizerFactory TODOs (#32063)
Relax TermVectors API to work with textual fields other than TextFieldType (#31915)
Updates the build to gradle 4.9 (#32087)
Mute :qa:mixed-cluster indices.stats/10_index/Index - all’
Check that client methods match API defined in the REST spec (#31825)
Enable testing in FIPS140 JVM (#31666)
Fix put mappings java API documentation (#31955)
Add exclusion option to `keep_types` token filter (#32012)
[Test] Modify assert statement for ssl handshake (#32072)
Prior to 6.3 a trial license default to security enabled. Since 6.3
they default to security disabled. If a cluster is upgraded from <6.3
to >6.3, then we detect this and mimic the old behaviour with respect
to security.
Now write operations like Index, Delete, Update rely on the write-index associated with
an alias to operate against. This means writes will be accepted even when an alias points to multiple indices, so long as one is the write index. Routing values will be used from the AliasMetaData for the alias in the write-index. All read operations are left untouched.
Relates #29827
This implementation behaves like the current transport client, that you basically cannot configure a Watch POJO representation as an argument to the put watch API, but only a bytes reference. You can use the the `WatchSourceBuilder` from the `org.elasticsearch.plugin:x-pack-core` dependency to build watches.
This commit also changes the license type to trial, so that watcher is available in high level rest client tests.
/cc @hub-cap
The rollup indexer uses a range query to select the next page
of results based on the last time bucket of the previous round
and the `delay` configured on the rollup job. This query uses
the `epoch_millis` format implicitly but doesn't set the `format`.
This result in errors during the rollup job if the field
definition doesn't allow this format. It can also miss documents
if the format is not accepted but another format in the field
definition is able to parse the query (e.g.: `epoch_second`).
This change ensures that we use `epoch_millis` as the only format
to parse the rollup range query.
* Detect and prevent configuration that triggers a Gradle bug
As we found in #31862, this can lead to a lot of wasted time as it's not
immediatly obvius what's going on.
Givent how many projects we have it's getting increasingly easier to run
into gradle/gradle#847.
This is related to #32122. A number of things changed related to adding
TLS 1.3 support in JDK11. Some exception messages and other SSLEngine
behavior changed. This commit fixes assertions on exception messages.
Additionally it identifies two bugs related to how the SSLDriver behaves
in regards to JDK11 changes. Finally, it mutes a tests until correct
behavior can be identified. There is another open issue for that muted
test (#32144).
* Add basic support for field aliases in index mappings. (#31287)
* Allow for aliases when fetching stored fields. (#31411)
* Add tests around accessing field aliases in scripts. (#31417)
* Add documentation around field aliases. (#31538)
* Add validation for field alias mappings. (#31518)
* Return both concrete fields and aliases in DocumentFieldMappers#getMapper. (#31671)
* Make sure that field-level security is enforced when using field aliases. (#31807)
* Add more comprehensive tests for field aliases in queries + aggregations. (#31565)
* Remove the deprecated method DocumentFieldMappers#getFieldMapper. (#32148)
Remove references to the `platinum` image and add a self-generated trial
licence to the example for TLS on Docker.
Fixeselastic/elasticsearch-docker#176
Moves the customizations to the build to produce nice shadow jars and
javadocs into common build code, mostly BuildPlugin with a little into
the root build.gradle file. This means that any project that applies the
shadow plugin will automatically be set up just like the high level rest
client:
* The non-shadow jar will not be built
* The shadow jar will not have a "classifier"
* Tests will run against the shadow jar
* Javadoc will include all of the shadowed classes
* Service files in `META-INF/services` will be merged
Tests shard follow task in the context of a leader and follower ReplicationGroup,
in order to test how the shard follow logic reacts to certain shard related
failure scenarios.
More tests will need to be added, but this indicates what changes need to be made
to have these tests.
Relates to #30102
The ML config classes will shortly be moved to the X-Pack protocol
library to allow the ML APIs to be moved to the high level REST
client. Dependencies on server functionality should be removed
from the config classes before this is done.
This change is entirely about moving code between packages. It
does not add or remove any functionality or tests.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
There have been changes in error messages for `SSLHandshakeException`.
This has caused a couple of failures in our tests.
This commit modifies test verification to assert on exception type of
class `SSLHandshakeException`.
There was another issue in Java11 which caused NPE. The bug has now
been fixed on Java11 - early access build 22.
Bug Ref: https://bugs.java.com/bugdatabase/view_bug.do?bug_id=8206355
Enable the skipped tests due to this bug.
Closes#31940
* es/master:
Add Index UUID to `/_stats` Response (#31871)
Painless: Move and Rename Several Methods in the lookup package (#32105)
Bypass highlight query terms extraction on empty fields (#32090)
Switch non-x-pack to new style requests (#32106)
[Rollup] Add new capabilities endpoint for concrete rollup indices (#30401)
Revert "[test] disable packaging tests for suse boxes"
SQL: allow LEFT and RIGHT as function names (#32066)
DOCS: put LIMIT 10 to the SQL query (#32065)
[test] turn on host io cache for opensuse (#32053)
Tweaked Elasticsearch Service links for SEO
This introduces a new GetRollupIndexCaps API which allows the user to retrieve rollup capabilities of a specific rollup index (or index pattern). This is distinct from the existing RollupCaps endpoint.
- Multiple jobs can be stored in multiple indices and point to a single target data index pattern (logstash-*). The existing API finds capabilities/config of all jobs matching that data index pattern.
- One rollup index can hold data from multiple jobs, targeting multiple data index patterns. This new API finds the capabilities based on the concrete rollup indices.
Due to the way ANTLR works, any declared tokens need to be accounted for
manually inside function names (otherwise a different rule gets applied).
Fix#32046
* es/master: (21 commits)
Tweaked Elasticsearch Service links for SEO
Watcher: Store username on watch execution (#31873)
Use correct formatting for links (#29460)
Painless: Separate PainlessLookup into PainlessLookup and PainlessLookupBuilder (#32054)
Scripting: Remove dead code from painless module (#32064)
[Rollup] Replace RollupIT with a ESRestTestCase version (#31977)
[TEST] Consistent algorithm usage (#32077)
[Rollup] Fix duplicate field names in test (#32075)
Ensure only parent breaker trips in unit test
Unmute field collapsing rest tests
Fix BWC check after backport
[Tests] Fix failure due to changes exception message (#32036)
Remove unused params from SSource and Walker (#31935)
[Test] Mute MlJobIT#testDeleteJobAfterMissingAliases
Turn off real-mem breaker in REST tests
Turn off real-mem breaker in single node tests
Fix broken OpenLDAP Vagrant QA test
Cleanup Duplication in `PainlessScriptEngine` (#31991)
SCRIPTING: Remove unused MultiSearchTemplateRequestBuilder (#32049)
Fix compile issues introduced by merge (#32058)
...
There is currently no way to see what user executed a watch. This commit
adds the decrypted username to each execution in the watch history, in a
new field "user".
Closes#31772
The old RollupIT was a node IT, an flaky for a number of reasons.
This new version is an ESRestTestCase and should be a little more robust.
This was added to the multi-node QA tests as that seemed like the most
appropriate location. It didn't seem necessary to create a whole new
QA module.
Note: The only test that was ported was the "Big" test for validating
a larger dataset. The rest of the tests are represented in existing
yaml tests.
Closes#31258Closes#30232
Related to #30290
Ensure that the same algorithm is used for settings and
change password requests for consistency, even if we
do not expext to reach the code where the algorithm is
checked for now.
Completes a7eaa409e8
The build was broken due to some issues with the merging of #32018. A
method that was public went private before the PR was merged. That did
not cause a merge conflict (so the PR was merged successfully). But it
did cause the build to fail.
This is related to #27260. It adds the SecurityNioHttpServerTransport
to the security plugin. It randomly uses the nio http transport in
security integration tests.
Metric config already whitelist scaled_floats, but it wasn't added to
the histo group config. This centralizes the mapping types map
so that both metrics and histo (and any future configs) use the same
map.
Fixes#32035
This commit allows for rebuilding watcher secure secrets via the
reload_secure_settings API call. The commit also renames a method in the
Notification Service to make it a bit more readable.
This commit adds the _xpack/usage api to the high level rest client.
Currently in the transport api, the usage data is exposed in a limited
fashion, at most giving one level of helper methods for the inner keys
of data, but then exposing thos subobjects as maps of objects. Rather
than making parsers for every set of usage data from each feature, this
PR exposes the entire set of usage data as a map of maps.
Other watcher actions already account for secure settings in their
sensitive settings, whereas the email sending action did not. This adds
the ability to optionally set a secure_password for email accounts.
Previously, the ensureWatchExists was overridable. This commit makes
it final so that it cannot be overridden, and cleans up some redundant
code in the process.
There was still a case with a null text that allowed for 0 attachments
to be created. This commit ensures that greater than zero are created
if the text is null. Otherwise, it uses the same logic to create 0 to 3
random attachments.
Closes#31948
We can leverage the composite agg's new `missing_bucket` feature on
terms groupings. This means the aggregation criteria used in the indexer
will now return null buckets for missing keys.
Because all buckets are now returned (even if a key is null),
we can guarantee correct doc counts with
"combined" jobs (where a job rolls up multiple schemas). This was
previously impossible since composite would ignore documents that
didn't have _all_ the keys, meaning non-overlapping schemas would
cause composite to return no buckets.
Note: date_histo does not use `missing_bucket`, since a timestamp is
always required.
The docs have been adjusted to recommend a single, combined job. It
also makes reference to the previous issue to help users that are upgrading
(rather than just deleting the sections).
The previous errors in compileJava were not cause by the brackets but my the
content of the @link section. Corrected this so its a working javadoc link again.
When an ML job cannot be allocated to a node the exception
contained an explanation of why the job couldn't be
allocated to each node in the cluster. For large clusters
this was not particularly easy to read and made the error
displayed in the UI look very scary.
This commit changes the structure of the error to an outer
ElasticsearchException with a high level message and an
inner IllegalStateException containing the detailed
explanation. Because the definition of root cause is the
innermost ElasticsearchException the detailed explanation
will not be the root cause (which is what Kibana displays).
Fixes#29950
Historically we have loaded SSL objects (such as SSLContext,
SSLIOSessionStrategy) by passing in the SSL settings, constructing a
new SSL configuration from those settings and then looking for a
cached object that matches those settings.
The primary issue with this approach is that it requires a fully
configured Settings object to be available any time the SSL context
needs to be loaded. If the Settings include SecureSettings (such as
passwords for keys or keystores) then this is not true, and the cached
SSL object cannot be loaded at runtime.
This commit introduces an alternative approach of naming every cached
ssl configuration, so that it is possible to load the SSL context for
a named configuration (such as "xpack.http.ssl"). This means that the
calling code does not need to have ongoing access to the secure
settings that were used to load the configuration.
This change also allows monitoring exporters to use SSL passwords
from secure settings, however an exporter that uses a secure SSL setting
(e.g. truststore.secure_password) may not have its SSL settings updated
dynamically (this is prevented by a settings validator).
Exporters without secure settings can continue to be defined and updated
dynamically.
* master:
[TEST] Mute SlackMessageTests.testTemplateRender
Docs: Explain closing the high level client
[ML] Re-enable memory limit integration tests (#31328)
[test] disable packaging tests for suse boxes
Add nio transport to security plugin (#31942)
XContentTests : Insert random fields at random positions (#30867)
Force execution of fetch tasks (#31974)
Fix unreachable error condition in AmazonS3Fixture (#32005)
Tests: Fix SearchFieldsIT.testDocValueFields (#31995)
Add Expected Reciprocal Rank metric (#31891)
[ML] Get ForecastRequestStats doc in RestoreModelSnapshotIT (#31973)
SQL: Add support for single parameter text manipulating functions (#31874)
[ML] Ensure immutability of MlMetadata (#31957)
Tests: Mute SearchFieldsIT.testDocValueFields()
muted tests due to #31940
Work around reported problem in eclipse (#31960)
Move build integration tests out of :buildSrc project (#31961)
Tests: Remove use of joda time in some tests (#31922)
[Test] Reactive 3rd party tests on CI (#31919)
SQL: Support for escape sequences (#31884)
SQL: HAVING clause should accept only aggregates (#31872)
Docs: fix typo in datehistogram (#31972)
Switch url repository rest tests to new style requests (#31944)
Switch reindex tests to new style requests (#31941)
Docs: Added note about cloud service to installation and getting started
[DOCS] Removes alternative docker pull example (#31934)
Add Snapshots Status API to High Level Rest Client (#31515)
ingest: date_index_name processor template resolution (#31841)
Test: fix null failure in watcher test (#31968)
Switch test framework to new style requests (#31939)
Switch low level rest tests to new style Requests (#31938)
Switch high level rest tests to new style requests (#31937)
[ML] Mute test failing due to Java 11 date time format parsing bug (#31899)
[TEST] Mute SlackMessageTests.testTemplateRender
Fix assertIngestDocument wrongfully passing (#31913)
Remove unused reference to filePermissionsCache (#31923)
rolling upgrade should use a replica to prevent relocations while running a scroll
HLREST: Bundle the x-pack protocol project (#31904)
Increase logging level for testStressMaybeFlush
Added lenient flag for synonym token filter (#31484)
[X-Pack] Beats centralized management: security role + licensing (#30520)
HLRest: Move xPackInfo() to xPack().info() (#31905)
Docs: add security delete role to api call table (#31907)
[test] port archive distribution packaging tests (#31314)
Watcher: Slack message empty text (#31596)
[ML] Mute failing DetectionRulesIT.testCondition() test
Fix broken NaN check in MovingFunctions#stdDev() (#31888)
Date: Add DateFormatters class that uses java.time (#31856)
[ML] Switch native QA tests to a 3 node cluster (#31757)
Change trappy float comparison (#31889)
Fix building AD URL from domain name (#31849)
Add opaque_id to audit logging (#31878)
re-enable backcompat tests
add support for is_write_index in put-alias body parsing (#31674)
Improve release notes script (#31833)
[DOCS] Fix broken link in painless example
Handle missing values in painless (#30975)
Remove the ability to index or query context suggestions without context (#31007)
Ingest: Enable Templated Fieldnames in Rename (#31690)
[Docs] Fix typo in the Rollup API Quick Reference (#31855)
Ingest: Add ignore_missing option to RemoveProc (#31693)
Add template config for Beat state to X-Pack Monitoring (#31809)
Watcher: Add ssl.trust email account setting (#31684)
Remove link to oss-MSI (#31844)
Painless: Restructure Definition/Whitelist (#31879)
HLREST: Add x-pack-info API (#31870)
This is related to #27260. It adds the SecurityNioTransport to the
security plugin. Additionally, it adds support for ip filtering. And it
randomly uses the nio transport in security integration tests.
Added support for ASCII, BIT_LENGTH, CHAR, CHAR_LENGTH, LCASE, LENGTH, LTRIM, RTRIM, SPACE, UCASE functions.
Wherever Painless scripting is necessary (WHERE conditions, ORDER BY etc), those scripts are being used.
The test failure in #31916 revealed that updating
rules on a job was modifying the detectors list
in-place. That meant the old cluster state and the
updated cluster state had no difference and thus the
change was not propagated to non-master nodes.
This commit fixes that and also reviews all of ML
metadata in order to ensure immutability.
Closes#31916
A new commit was merged that does not allow a null attachement &&
text. This is valid for the slack API, as it does not allow this, but
our unit tests did. This commit fixes the broken unit test.
Closes#31948
Currently Role.Builder keeps a reference to the FieldPermissionsCache that is
passed into its constructors. This seems to be unused except for passing it on
to convertFromIndicesPrivileges() in the second ctor itself, but we don't need
to keep the internal reference in that case, so it can be removed.
Relates to #31876
A scroll holds a reference to the shard store. If the cluster is moving shards
around that reference can prevent a shard from relocating back to node it used
to be on, causing test failures.
Closes#31827
* Adding Beats x-pack plugin + index templates
* Adding built-in roles for Beats central management
* Fixing typo
* Refactoring: extract common code into method
* More refactoring for more code reuse
* Use a single index for Beats management
* Rename "fragment" to "block"
* Adding configuration block type
* Expand kibana_system role to include Beats management index privileges
* Fixing syntax
* Adding test
* Adding asserting for reserved role
* Fixing privileges
* Updating template
* Removing beats plugin
* Fixing tests
* Fixing role variable name
* Fixing assertions
* Switching to preferred syntax for boolean false checks
* Making class final
* Making variables final
* Updating Basic license message to be more accurate
Originally I put the X-Pack info object into the top level rest client
object. I did that because we thought we'd like to squash `xpack` from
the name of the X-Pack APIs now that it is part of the default
distribution. We still kind of want to do that, but at least for now we
feel like it is better to keep the high level rest client aligned with
the other language clients like C# and Python. This shifts the X-Pack
info API to align with its json spec file.
Relates to #31870
Slack accepts an empty text or attachments, but not both. This commit
ensures that both are not empty when creating a watch.
Closes#30071
Replacing old pull request: #31288
The current shard follow mechanism is complex and does not give us easy ways the have visibility into the system (e.g. why we are falling behind).
The main reason why it is complex is because the current design is highly asynchronous. Also in the current model it is hard to apply backpressure
other than reducing the concurrent reads from the leader shard.
This PR has the following changes:
* Rewrote the shard follow task to coordinate the shard follow mechanism between a leader and follow shard in a single threaded manner.
This allows for better unit testing and makes it easier to add stats.
* All write operations read from the shard changes api should be added to a buffer instead of directly sending it to the bulk shard operations api.
This allows to apply backpressure. In this PR there is a limit that controls how many write ops are allowed in the buffer after which no new reads
will be performed until the number of ops is below that limit.
* The shard changes api includes the current global checkpoint on the leader shard copy. This allows reading to be a more self sufficient process;
instead of relying on a background thread to fetch the leader shard's global checkpoint.
* Reading write operations from the leader shard (via shard changes api) is a separate step then writing the write operations (via bulk shards operations api).
Whereas before a read would immediately result into a write.
* The bulk shard operations api returns the local checkpoint on the follow primary shard, to keep the shard follow task up to date with what has been written.
* Moved the shard follow logic that was previously in ShardFollowTasksExecutor to ShardFollowNodeTask.
* Moved over the changes from #31242 to make shard follow mechanism resilient from node and shard failures.
Relates to #30086
The steps to read the settings and build URLs happen in a non-obvious
order, which meant that we would build the default URL (from the
domain name, and port) before we'd actually read the port settings.
This would cause the URL to always have a port of `0`.
Relates: bccf988
With https://github.com/elastic/beats/pull/7075 Beats introduces state reporting for X-Pack Monitoring. The data sent up to Elasticsearch ends up stored in the following format.
```
"beats_state": {
"timestamp": "2018-07-05T07:21:03.581Z",
"state": {
"module": {
"count": 1,
"names": [
"http"
]
}
},
"beat": {
"uuid": "594039b5-6353-4d78-9bad-778ecc0fe83f",
"type": "metricbeat",
"version": "7.0.0-alpha1",
"name": "ruflin",
"host": "ruflin"
}
}
```
This PR adds the new fields to the template.
This is the first x-pack API we're adding to the high level REST client
so there is a lot to talk about here!
= Open source
The *client* for these APIs is open source. We're taking the previously
Elastic licensed files used for the `Request` and `Response` objects and
relicensing them under the Apache 2 license.
The implementation of these features is staying under the Elastic
license. This lines up with how the rest of the Elasticsearch language
clients work.
= Location of the new files
We're moving all of the `Request` and `Response` objects that we're
relicensing to the `x-pack/protocol` directory. We're adding a copy of
the Apache 2 license to the root fo the `x-pack/protocol` directory to
line up with the language in the root `LICENSE.txt` file. All files in
this directory will have the Apache 2 license header as well. We don't
want there to be any confusion. Even though the files are under the
`x-pack` directory, they are Apache 2 licensed.
We chose this particular directory layout because it keeps the X-Pack
stuff together and easier to think about.
= Location of the API in the REST client
We've been following the layout of the rest-api-spec files for other
APIs and we plan to do this for the X-Pack APIs with one exception:
we're dropping the `xpack` from the name of most of the APIs. So
`xpack.graph.explore` will become `graph().explore()` and
`xpack.license.get` will become `license().get()`.
`xpack.info` and `xpack.usage` are special here though because they
don't belong to any proper category. For now I'm just calling
`xpack.info` `xPackInfo()` and intend to call usage `xPackUsage` though
I'm not convinced that this is the final name for them. But it does get
us started.
= Jars, jars everywhere!
This change makes the `xpack:protocol` project a `compile` scoped
dependency of the `x-pack:plugin:core` and `client:rest-high-level`
projects. I intend to keep it a compile scoped dependency of
`x-pack:plugin:core` but I intend to bundle the contents of the protocol
jar into the `client:rest-high-level` jar in a follow up. This change
has grown large enough at this point.
In that followup I'll address javadoc issues as well.
= Breaking-Java
This breaks that transport client by a few classes around. We've
traditionally been ok with doing this to the transport client.
* master:
[ML] Fix master node deadlock during ML daily maintenance (#31836)
Build: Switch integ-test-zip to OSS-only (#31866)
SQL: Remove restriction for single column grouping (#31818)
Build: Fix detection of Eclipse Compiler Server (#31838)
Docs: Inconsistency between description and example (#31858)
Re-enable bwc tests now that #29538 has been backported and 6.x intake build succeeded.
QA: build improvements related to SQL projects (#31862)
[Docs] Add clarification to analysis example (#31826)
Check timeZone() argument in AbstractSqlQueryRequest (#31822)
SQL: Fix incorrect HAVING equality (#31820)
Smaller aesthetic fixes to InternalTestCluster (#31831)
[Docs] Clarify accepted sort case (#31605)
Temporarily disable bwc test in order to backport #29538
Remove obsolete parameters from analyze rest spec (#31795)
[Docs] Fix wrong link in Korean analyzer docs (#31815)
Fix profiling of ordered terms aggs (#31814)
Properly mute test involving JDK11 closes#31739
Do not return all indices if a specific alias is requested via get aliases api. (#29538)
Get snapshot rest client cleanups (#31740)
Docs: Explain _bulk?refresh shard targeting
Fix handling of points_only with term strategy in geo_shape (#31766)
For historical reasons SQL restricts GROUP BY to only one field.
This commit removes the restriction and improves the test suite with
multi group by tests.
Close#31793
Register SQL as an xpackModule
Specify group for SQL QA to disambiguate projects (otherwise due to an
old Gradle bug (https://github.com/gradle/gradle/issues/847) any
subprojects under SQL QA will not be able to refer to SQL xpackModule
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
If a get alias api call requests a specific alias pattern then
indices not having any matching aliases should not be included in the response.
This is a second attempt to fix this (first attempt was #28294).
The reason that the first attempt was reverted is because when xpack
security is enabled then index expression (like * or _all) are resolved
prior to when a request is processed in the get aliases transport action,
then `MetaData#findAliases` can't know whether requested all where
requested since it was already expanded in concrete alias names. This
change replaces aliases(...) replaceAliases(...) method on AliasesRequests
class and leave the aliases(...) method on subclasses. So there is a distinction
between when xpack security replaces aliases and a user setting aliases via
the transport or high level http client.
Closes#27763
* master:
REST high-level client: add get index API (#31703)
SQL: Allow long literals (#31777)
SQL: Fix incorrect message for aliases (#31792)
Test: Do not remove xpack templates when cleaning (#31642)
Reduce more raw types warnings (#31780)
Add unreleased version 6.3.2
Scripting: Remove support for deprecated StoredScript contexts (#31394)
[ML][TEST] Use java 11 valid time format in DataDescriptionTests (#31817)
[ML] Don't treat stale FAILED jobs as OPENING in job allocation (#31800)
[ML] Fix calendar and filter updates from non-master nodes (#31804)
Fix license header generation on Windows (#31790)
mark RollupIT.testTwoJobsStartStopDeleteOne as AwaitsFix
mark SearchAsyncActionTests.testFanOutAndCollect as AwaitsFix
Correct exclusion of test on JDK 11
Fix doclint jdk 11
Add JDK11 support and enable in CI (#31644)
Watcher: Fix check for currently executed watches (#31137)
Watcher: Ensure correct method is used to read secure settings (#31753)
SQL: Update CLI logo
Removes support for storing scripts without the usual json around the
script. So You can no longer do:
```
POST _scripts/<templatename>
{
"query": {
"match": {
"title": "{{query_string}}"
}
}
}
```
and must instead do:
```
POST _scripts/<templatename>
{
"script": {
"lang": "mustache",
"source": {
"query": {
"match": {
"title": "{{query_string}}"
}
}
}
}
}
```
This improves error reporting when you attempt to store a script but don't
quite get the syntax right. Before, there was a good chance that we'd
think of it as a "raw" template and just store it. Now we won't do that.
Nice.
It seems that java 11 tightened some validations with regard to
time formats. The random instance creator was setting an odd
time format to the data description which is invalid when run
with java 11. This commit changes it to a valid format.
Job persistent tasks with stale allocation IDs used to always be
considered as OPENING jobs in the ML job node allocation decision.
However, FAILED jobs are not relocated to other nodes, which leads
to them blocking up the nodes they failed on after node restarts.
FAILED jobs should not restrict how many other jobs can open on a
node, regardless of whether they are stale or not.
Closes#31794
Job updates or changes to calendars or filters may
result into updating the job process if it has been
running. To preserve the order of updates, process
updates are queued through the UpdateJobProcessNotifier
which is only running on the master node. All actions
performing such updates must run on the master node.
However, the CRUD actions for calendars and filters
are not master node actions. They have been submitting
the updates to the UpdateJobProcessNotifier even though
it might have not been running (given the action was
run on a non-master node). When that happens, the update
never reaches the process.
This commit fixes this problem by ensuring the notifier
runs on all nodes and by ensuring the process update action
gets the resources again before updating the process
(instead of having those resources passed in the request).
This ensures that even if the order of the updates
gets messed up, the latest update will read the latest
state of those resource and the process will get back
in sync.
This leaves us with 2 types of updates:
1. updates to the job config should happen on the master
node. This is because we cannot refetch the entire job
and update it. We need to know the parts that have been changed.
2. updates to resources the job uses. Those can be handled
on non-master nodes but they should be re-fetched by the
update process action.
Closes#31803
* Upgrade bouncycastle
Required to fix
`bcprov-jdk15on-1.55.jar; invalid manifest format `
on jdk 11
* Downgrade bouncycastle to avoid invalid manifest
* Add checksum for new jars
* Update tika permissions for jdk 11
* Mute test failing on jdk 11
* Add JDK11 to CI
* Thread#stop(Throwable) was removed
http://mail.openjdk.java.net/pipermail/core-libs-dev/2018-June/053536.html
* Disable failing tests #31456
* Temprorarily disable doc tests
To see if there are other failures on JDK11
* Only blacklist specific doc tests
* Disable only failing tests in ingest attachment plugin
* Mute failing HDFS tests #31498
* Mute failing lang-painless tests #31500
* Fix backwards compatability builds
Fix JAVA version to 10 for ES 6.3
* Add 6.x to bwx -> java10
* Prefix out and err from buildBwcVersion for readability
```
> Task :distribution:bwc:next-bugfix-snapshot:buildBwcVersion
[bwc] :buildSrc:compileJava
[bwc] WARNING: An illegal reflective access operation has occurred
[bwc] WARNING: Illegal reflective access by org.codehaus.groovy.reflection.CachedClass (file:/home/alpar/.gradle/wrapper/dists/gradle-4.5-all/cg9lyzfg3iwv6fa00os9gcgj4/gradle-4.5/lib/groovy-all-2.4.12.jar) to method java.lang.Object.finalize()
[bwc] WARNING: Please consider reporting this to the maintainers of org.codehaus.groovy.reflection.CachedClass
[bwc] WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
[bwc] WARNING: All illegal access operations will be denied in a future release
[bwc] :buildSrc:compileGroovy
[bwc] :buildSrc:writeVersionProperties
[bwc] :buildSrc:processResources
[bwc] :buildSrc:classes
[bwc] :buildSrc:jar
```
* Also set RUNTIME_JAVA_HOME for bwcBuild
So that we can make sure it's not too new for the build to understand.
* Align bouncycastle dependency
* fix painles array tets
closes#31500
* Update jar checksums
* Keep 8/10 runtime/compile untill consensus builds on 11
* Only skip failing tests if running on Java 11
* Failures are dependent of compile java version not runtime
* Condition doc test exceptions on compiler java version as well
* Disable hdfs tests based on runtime java
* Set runtime java to minimum supported for bwc
* PR review
* Add comment with ticket for forbidden apis
The ack watch action has a check for currently executed watches, to make
sure that currently running watches cannot be acknowledged. This check
only checked on the coordinating node for watches being executed, but should
have checked the whole cluster using a WatcherStatsRequest, which is
being switched to in this commit.
As SecureSetting is extended from Setting, you can easily accidentally
use `SecureSetting.simpleString()` to read a secure setting instead of
`SecureSetting.secureString()`. This commit changes this behaviour in
some watcher notification services.
* master:
[ML] Rate limit established model memory updates (#31768)
[Docs] Correct default window_size (#31582)
S3 fixture should report 404 on unknown bucket (#31782)
Detach Transport from TransportService (#31727)
[ML] Limit ML filter items to 10K (#31731)
[ML] Return statistics about forecasts as part of the jobsstats and usage API (#31647)
Fixture for Minio testing (#31688)
[DOCS] Add missing get mappings docs to HLRC (#31765)
[DOCS] Starting Elasticsearch (#31701)
Painless: Complete Removal of Painless Type (#31699)
Fix not waiting for Netty ThreadDeathWatcher in IT (#31758)
Consolidate watcher setting update registration (#31762)
Build: re-enabled bwc (#31769)
ingest: Introduction of a bytes processor (#31733)
Fix coerce validation_method in GeoBoundingBoxQueryBuilder (#31747)
Add analyze API to high-level rest client (#31577)
[DOCS] Typos
DOC: Add examples to the SQL docs (#31633)
Add support for AWS session tokens (#30414)
Watcher: Reenable start/stop yaml tests (#31754)
Implemented XContent serialisation for GetIndexResponse (#31675)
JDBC: Fix stackoverflow on getObject and timestamp conversion (#31735)
resolveHasher defaults to NOOP (#31723)
Account for XContent overhead in in-flight breaker
Split CircuitBreaker-related tests (#31659)
Add write*Blob option to replace existing blob (#31729)
Painless: Add Context Docs (#31190)
Watcher: Fix chain input toXcontent serialization (#31721)
Docs: Match the examples in the description (#31710)
rest-high-level: added get cluster settings (#31706)
[Docs] Correct typos (#31720)
Clean up double semicolon code typos (#31687)
[DOCS] Check for Windows and *nix file paths (#31648)
[ML] Validate ML filter_id (#31535)
Revert long lines
Fix TransportChangePasswordActionTests
There is at most one model size stats document per bucket, but
during lookback a job can churn through many buckets very quickly.
This can lead to many cluster state updates if established model
memory needs to be updated for a given model size stats document.
This change rate limits established model memory updates to one
per job per 5 seconds. This is done by scheduling the updates 5
seconds in the future, but replacing the value to be written if
another model size stats document is received during the waiting
period. Updating the values in arrears like this means that the
last value received will be the one associated with the job in the
long term, whereas alternative approaches such as not updating the
value if a new value was close to the old value would not.
Today TransportService is tightly coupled with Transport since it
requires an instance of TransportService in order to receive responses
and send requests. This is mainly due to the Request and Response handlers
being maintained in TransportService but also because of the lack of a proper
callback interface.
This change moves request handler registry and response handler registration into
Transport and adds all necessary methods to `TransportConnectionListener` in order
to remove the `TransportService` dependency from `Transport`
Transport now accepts one or more `TransportConnectionListener` instances that are
executed sequentially in a blocking fashion.
Add hard limit to the number of items
a filter may have. This serves to protect
from excessive overhead due to the filters
taking too much memory or lookups becoming
too expensive.
This change adds stats about forecasts, to the jobstats api as well as xpack/_usage. The following
information is collected:
_xpack/ml/anomaly_detectors/{jobid|_all}/_stats:
- total number of forecasts
- memory statistics (mean/min/max)
- runtime statistics
- record statistics
- counts by status
_xpack/usage
- collected by job status as well as overall (_all):
- total number of forecasts
- number of jobs that have at least 1 forecast
- memory, runtime, record statistics
- counts by status
Fixes#31395
Previously the call to register a listener for settings updates was in
each individual service, rather than in the notification service
itself. This change ensures that each child of the notification service
gets registered with the settings update consumer.
Significantly improve the example snippets in the documentation.
The examples are part of the test suite and checked nightly.
To help readability, the existing dataset was extended (test_emp renamed
to emp plus library).
Improve output of JDBC tests to be consistent with the CLI
Add lenient flag to JDBC asserts to allow type widening (a long is
equivalent to a integer as long as the value is the same).
* Default resolveFromHash to Hasher.NOOP
This changes the default behavior when resolving the hashing
algorithm from unrecognised hash strings, which was introduced in
#31234
A hash string that doesn't start with an algorithm identifier can
either be a malformed/corrupted hash or a plaintext password when
Hasher.NOOP is used(against warnings).
Do not make assumptions about which of the two is true for such
strings and default to Hasher.NOOP. Hash verification will subsequently
fail for malformed hashes.
Finally, do not log the potentially malformed hash as this can very
well be a plaintext password.
Resolves#31697
Reverts 58cf95a06f
The xcontent parameters were not passed to the xcontent serialization
of the chain input for each chain. This could lead to wrongly stored
watches, which did not contain passwords but only their redacted counterparts, when an input inside of a chain input contained a password.
Proper cleanup of the docs snippet tests depends on detecting what is being tested (ML, Watcher, etc) this is deduced from the file path and so we must account for Windows and Unix path separators
testIncorrectPasswordHashingAlgorithm is based on the assumption
that the algorithm selected for the change password request is
different than the one selected for the NativeUsersStore.
pbkdf2_10000 is the same as pbkdf2 since 10000 is the default cost
factor for pbkdf2 and thus should not be used as an option for the
passwordHashingSettings.
Also make sure that the same algorithm is used for settings and
change password requests in other tests for consistency, even if
we expect to not reach the code where the algorithm is checked for
now.
Resolves#31696
Reverts 1c4f480794
Some proxies require all requests to have paths starting with / since
there are no relative paths at the HTTP connection level. Elasticsearch
assumes paths are absolute. In order to run rest tests against a cluster
behind such a proxy, set the system property
tests.rest.client_path_prefix to /.
* master:
Mute 'Test typed keys parameter for suggesters' as we await a fix.
Build test: Thread linger
Fix gradle4.8 deprecation warnings (#31654)
Mute FileRealmTests#testAuthenticateCaching with an @AwaitsFix.
Mute TransportChangePasswordActionTests#testIncorrectPasswordHashingAlgorithm with an @AwaitsFix.
Build: Fix naming conventions task (#31681)
Introduce a Hashing Processor (#31087)
* remove explicit wrapper task
It's created by Gradle and triggers a deprecation warning
Simplify configuration
* Upgrade shadow plugin to get rid of Gradle deprecation
* Move compile configuration to base plugin
Solves Gradle deprecation warning from earlier Gradle versions
* Enable stable publishing in the Gradle build
* Replace usage of deprecated property
* bump Gradle version in build compare
It is useful to have a processor similar to
logstash-filter-fingerprint
in Elasticsearch. A processor that leverages a variety of hashing algorithms
to create cryptographically-secure one-way hashes of values in documents.
This processor introduces a pbkdf2hmac hashing scheme to fields in documents
for indexing
* master:
Do not check for object existence when deleting repository index files (#31680)
Remove extra check for object existence in repository-gcs read object (#31661)
Support multiple system store types (#31650)
[Test] Clean up some repository-s3 tests (#31601)
[Docs] Use capital letters in section headings (#31678)
[DOCS] Add PQL language Plugin (#31237)
Merge AzureStorageService and AzureStorageServiceImpl and clean up tests (#31607)
TEST: Fix test task invocation (#31657)
Revert "[TEST] Mute failing tests in NativeRealmInteg and ReservedRealmInteg"
Fix RealmInteg test failures
Extend allowed characters for grok field names (#21745) (#31653)
[DOCS] Fix licensing API details (#31667)
[TEST] Mute failing tests in NativeRealmInteg and ReservedRealmInteg
Fix CreateSnapshotRequestTests Failure (#31630)
Configurable password hashing algorithm/cost (#31234)
[TEST] Mute failing NamingConventionsTaskIT tests
[DOCS] Replace CONFIG_DIR with ES_PATH_CONF (#31635)
Core: Require all actions have a Task (#31627)
Support multiple system store types
When falling back to using the system keystore and - most usually -
truststore, do not assume that it will be a JKS store, but deduct
its type from {@code KeyStore#getDefaultKeyStoreType}. This allows
the use of any store type the Security Provider supports by setting
the keystore.type java security property.
As part of the changes in #31234,the password verification logic
determines the algorithm used for hashing the password from the
format of the stored password hash itself. Thus, it is generally
possible to validate a password even if it's associated stored hash
was not created with the same algorithm than the one currently set
in the settings.
At the same time, we introduced a check for incoming client change
password requests to make sure that the request's password is hashed
with the same algorithm that is configured to be used in the node
settings.
In the spirit of randomizing the algorithms used, the
{@code SecurityClient} used in the {@code NativeRealmIntegTests} and
{@code ReservedRealmIntegTests} would send all requests dealing with
user passwords by randomly selecting a hashing algorithm each time.
This meant that some change password requests were using a different
password hashing algorithm than the one used for the node and the
request would fail.
This commit changes this behavior in the two aforementioned Integ
tests to use the same password hashing algorithm for the node and the
clients, no matter what the request is.
Resolves#31670
Make password hashing algorithm/cost configurable for the
stored passwords of users for the realms that this applies
(native, reserved). Replaces predefined choice of bcrypt with
cost factor 10.
This also introduces PBKDF2 with configurable cost
(number of iterations) as an algorithm option for password hashing
both for storing passwords and for the user cache.
Password hash validation algorithm selection takes into
consideration the stored hash prefix and only a specific number
of algorithnm and cost factor options for brypt and pbkdf2 are
whitelisted and can be selected in the relevant setting.
The TaskManager and TaskAwareRequest could return null when registering
a task according to their javadocs, but no implementations ever actually
did that. This commit removes that wording from the javadocs and ensures
null is no longer allowed.
* master:
Docs: Remove duplicate test setup
Print output when the name checker IT fails (#31660)
Fix syntax errors in get-snapshots docs (#31656)
Docs: Fix description of percentile ranks example example (#31652)
Add MultiSearchTemplate support to High Level Rest client (#30836)
Add test for low-level client round-robin behaviour (#31616)
SQL: Refactor package names of sql-proto and sql-shared-proto projects (#31622)
Remove deprecation warnings to prepare for Gradle 5 (sourceSets.main.output.classesDirs) (#30389)
Correct integTest enable logic (#31646)
Fix missing get-snapshots docs reference #31645
Do not check for Azure container existence (#31617)
Merge AwsS3Service and InternalAwsS3Service in a S3Service class (#31580)
Upgrade gradle wrapper to 4.8 (#31525)
Only set vm.max_map_count if greater than default (#31512)
Add Get Snapshots High Level REST API (#31537)
QA: Merge query-builder-bwc to restart test (#30979)
Update reindex.asciidoc (#31626)
Docs: Skip xpack snippet tests if no xpack (#31619)
mute CreateSnapshotRequestTests
HLRest: Fix test for explain API
[TEST] Fix RemoteClusterConnectionTests
Add Create Snapshot to High-Level Rest Client (#31215)
Remove legacy MetaDataStateFormat (#31603)
Add explain API to high-level REST client (#31387)
Preserve thread context when connecting to remote cluster (#31574)
Unify headers for full text queries
Remove redundant 'minimum_should_match'
JDBC driver prepared statement set* methods (#31494)
[TEST] call yaml client close method from test suite (#31591)
* Remove deprecation warnings to prepare for Gradle 5
Gradle replaced `project.sourceSets.main.output.classesDir` of type
`File` with `project.sourceSets.main.output.classesDirs` of type
`FileCollection`
(see [SourceSetOutput](https://github.com/gradle/gradle/blob/master/subprojects/plugins/src/main/java/org/gradle/api/tasks/SourceSetOutput.java))
Build output is now stored on a per language folder.
There are a few places where we use that, here's these and how it's
fixed:
- Randomized Test execution
- look in all test folders ( pass the multi dir configuration to the
ant runner )
- DRY the task configuration by introducing `basedOn` for
`RandomizedTestingTask` DSL
- Extend the naming convention test to support passing in multiple
directories
- Fix the standalon test plugin, the dires were not passed trough,
checked with a debuger and the statement had no affect due to a
missing `=`.
Closes#30354
* Only check Java tests, PR feedback
- Name checker was ran for Groovy tests that don't adhere to the same
convections causing the check to fail
- implement PR feedback
* Replace `add` with `addAll`
This worked because the list is passed to `project.files` that does the
right thing.
* Revert "Only check Java tests, PR feedback"
This reverts commit 9bd9389875d8b88aadb50df57a45cd0d2b073241.
* Remove `basedOn` helper
* Bring some changes back
Previus revert accidentally reverted too much
* Fix negation
* add back public
* revert name check changes
* Revert "revert name check changes"
This reverts commit a2800c0b363168339ea65e2a79ec8256e5883e6d.
* Pass all dirs to name check
Only run on Java for build-tools, this is safe because it's a self test.
It needs more work before we could pass in the Groovy classes as well as
these inherit from `GroovyTestCase`
* remove self tests from name check
The self complicates the task setup and disable real checks on
build-tools.
With this change there are no more self tests, and the build-tools tests
adhere to the conventions.
The self test will be replaced by gradle test kit, thus the addition of
the Gradle plugin builder plugin.
* First test to run a Gradle build
* Add tests that replace the name check self test
* Clean up integ test base class
* Always run tests
* Align with test naming conventions
* Make integ. test case inherit from unit test case
The check requires this
* Remove `import static org.junit.Assert.*`
* Move to Gradle 4.8 RC1
* Use latest version of plugin
The current does not work with Gradle 4.8 RC1
* Switch to Gradle GA
* Add and configure build compare plugin
* add work-around for https://github.com/gradle/gradle/issues/5692
* work around https://github.com/gradle/gradle/issues/5696
* Make use of Gradle build compare with reference project
* Make the manifest more compare friendly
* Clear the manifest in compare friendly mode
* Remove animalsniffer from buildscript classpath
* Fix javadoc errors
* Fix doc issues
* reference Gradle issues in comments
* Conditionally configure build compare
* Fix some more doclint issues
* fix typo in build script
* Add sanity check to make sure the test task was replaced
Relates to #31324. It seems like Gradle has an inconsistent behavior and
the taks is not always replaced.
* Include number of non conforming tasks in the exception.
* No longer replace test task, create implicit instead
Closes#31324. The issue has full context in comments.
With this change the `test` task becomes nothing more than an alias for `utest`.
Some of the stand alone tests that had a `test` task now have `integTest`, and a
few of them that used to have `integTest` to run multiple tests now only
have `check`.
This will also help separarate unit/micro tests from integration tests.
* Revert "No longer replace test task, create implicit instead"
This reverts commit f1ebaf7d93e4a0a19e751109bf620477dc35023c.
* Fix replacement of the test task
Based on information from gradle/gradle#5730 replace the task taking
into account the task providres.
Closes#31324.
* Only apply build comapare plugin if needed
* Make sure test runs before integTest
* Fix doclint aftter merge
* PR review comments
* Switch to Gradle 4.8.1 and remove workaround
* PR review comments
* Consolidate task ordering
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
* master:
ingest: Add ignore_missing property to foreach filter (#22147) (#31578)
Fix a formatting issue in the docvalue_fields documentation. (#31563)
reduce log level at gradle configuration time
[TEST] Close additional clients created while running yaml tests (#31575)
Docs: Clarify sensitive fields watcher encryption (#31551)
Watcher: Remove never executed code (#31135)
Add support for switching distribution for all integration tests (#30874)
Improve robustness of geo shape parser for malformed shapes (#31449)
QA: Create xpack yaml features (#31403)
Improve test times for tests using `RandomObjects::addFields` (#31556)
[Test] Add full cluster restart test for Rollup (#31533)
Enhance thread context uniqueness assertion
[DOCS] Fix heading format errors (#31483)
fix writeIndex evaluation for aliases (#31562)
Add x-opaque-id to search slow logs (#31539)
Watcher: Fix put watch action (#31524)
Add package pre-install check for java binary (#31343)
Reduce number of raw types warnings (#31523)
Migrate scripted metric aggregation scripts to ScriptContext design (#30111)
turn GetFieldMappingsResponse to ToXContentObject (#31544)
Close xcontent parsers (partial) (#31513)
Ingest Attachment: Upgrade Tika to 1.18 (#31252)
TEST: Correct the assertion arguments order (#31540)
The removed code snippet was never executed, as the version was never set and
thus always -1, after parsing the watch. With the changes done in
c9d77d20fd this logic would not have
worked correctly anyway.
* remove left-over comment
* make sure of the property for plugins
* skip installing modules if these exist in the distribution
* Log the distrbution being ran
* Don't allow running with integ-tests-zip passed externally
* top level x-pack/qa can't run with oss distro
* Add support for matching objects in lists
Makes it possible to have a key that points to a list and assert that a
certain object is present in the list. All keys have to be present and
values have to match. The objects in the source list may have additional
fields.
example:
```
match: { 'nodes.$master.plugins': { name: ingest-attachment } }
```
* Update plugin and module tests to work with other distributions
Some of the tests expected that the integration tests will always be ran
with the `integ-test-zip` distribution so that there will be no other
plugins loaded.
With this change, we check for the presence of the plugin without
assuming exclusivity.
* Allow modules to run on other distros as well
To match the behavior of tets.distributions
* Add and use a new `contains` assertion
Replaces the previus changes that caused `match` to do a partial match.
* Implement PR review comments
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
This pull request adds a full cluster restart test for a Rollup job.
The test creates and starts a Rollup job on the cluster and checks
that the job already exists and is correctly started on the upgraded
cluster.
This test allows to test that the persistent task state is correctly
parsed from the cluster state after the upgrade, as the status field
has been renamed to state in #31031.
The test undercovers a ClassCastException that can be thrown in
the RollupIndexer when the timestamp as a very low value that fits
into an integer. When it's the case, the value is parsed back as an
Integer instead of Long object and (long) position.get(rollupFieldName)
fails.
If no version is specified when putting a watch, the index API should be
used instead of the update API, so that the whole watch gets overwritten
instead of being merged with the existing one.
Merging only happens when a version is specified, so that credentials can be omitted, which is important for the watcher UI.
* master:
Add get field mappings to High Level REST API Client (#31423)
[DOCS] Updates Watcher examples for code testing (#31152)
TEST: Add bwc recovery tests with synced-flush index
[DOCS] Move sql to docs (#31474)
[DOCS] Move monitoring to docs folder (#31477)
Core: Combine doExecute methods in TransportAction (#31517)
IndexShard should not return null stats (#31528)
fix repository update with the same settings but different type (#31458)
Fix Mockito trying to mock IOException that isn't thrown by method (#31433) (#31527)
Node selector per client rather than per request (#31471)
Core: Combine messageRecieved methods in TransportRequestHandler (#31519)
Upgrade to Lucene 7.4.0. (#31529)
[ML] Add ML filter update API (#31437)
Allow multiple unicast host providers (#31509)
Avoid deprecation warning when running the ML datafeed extractor. (#31463)
REST high-level client: add simulate pipeline API (#31158)
Get Mapping API to honour allow_no_indices and ignore_unavailable (#31507)
[PkiRealm] Invalidate cache on role mappings change (#31510)
[Security] Check auth scheme case insensitively (#31490)
In NumberFieldType equals and hashCode, make sure that NumberType is taken into account. (#31514)
[DOCS] Fix REST tests in SQL docs
[DOCS] Add code snippet testing in more ML APIs (#31339)
Core: Remove ThreadPool from base TransportAction (#31492)
[DOCS] Remove fixed file from build.gradle
Rename createNewTranslog to fileBasedRecovery (#31508)
Test: Skip assertion on windows
[DOCS] Creates field and document level security overview (#30937)
[DOCS] Significantly improve SQL docs
[DOCS] Move migration APIs to docs (#31473)
Core: Convert TransportAction.execute uses to client calls (#31487)
Return transport addresses from UnicastHostsProvider (#31426)
Ensure local addresses aren't null (#31440)
Remove unused generic type for client execute method (#31444)
Introduce http and tcp server channels (#31446)
TransportAction currently contains 2 doExecute methods, one which takes
a the task, and one that does not. The latter is what some subclasses
implement, while the first one just calls the latter, dropping the given
task. This commit combines these methods, in favor of just always
assuming a task is present.
We have made node selectors configurable per request, but all
of other language clients don't allow for that.
A good reason not to do so, is that having a different node selector
per request breaks round-robin. This commit makes NodeSelector
configurable only at client initialization. It also improves the docs
on this matter, important given that a single node selector can still
affect round-robin.
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
This adds an api to allow updating a filter:
POST _xpack/ml/filters/{filter_id}/_update
The request body may have:
- description: setting a new description
- add_items: a list of the items to add
- remove_items: a list of the items to remove
This commit also changes the PUT filter api to
error when the filter_id is already used. As
now there is an api for updating filters, the
put api should only be used to create new ones.
Also, updating a filter results into a notification
message auditing the change for every job that is
using that filter.
In #29639 we added a `format` option to doc-value fields and deprecated usage
of doc-value fields without a format so that we could migrate doc-value fields
to use the format that comes with the mappings by default. However I missed to
fix the machine-learning datafeed extractor.
PkiRealm caches successful authentications and provides ways to
invalidate the cache. But in some scenario's the cache was not being
invalidated on role mapping change.
PkiRealm does not inform role mapper to be notified for cache
refresh on role mapping updates.
The logic in `TransportClearRealmCacheAction#nodeOperation`
which gets invoked for refreshing cache on realms, considers null or
empty realm names in the request as clear cache on all realms. When
LDAP realm is not present then it clears cache for all realms so it
works fine, but when LDAP realm is configured then role mapper
sends a request with LDAP realm names and so the cache is cleared
only for those realms.
This commit resolves the issue by registering PkiRealm with role
mapper for cache refresh. PkiRealm implements CachingRealm and as it
does not extend CachingUsernamePasswordRealm, have modified the
interface method `refreshRealmOnChange` to accept CachingRealm.
According to RFC 7617, the Basic authentication scheme name
should not be case sensitive.
Case insensitive comparisons are also applicable for the bearer
tokens where Bearer authentication scheme is used as per
RFC 6750 and RFC 7235
Some Http clients may send authentication scheme names in
different case types for eg. Basic, basic, BASIC, BEARER etc.,
so the lack of case-insensitive check is an issue when these
clients try to authenticate with elasticsearch.
This commit adds case-insensitive checks for Basic and Bearer
authentication schemes.
Closes#31486
Most transport actions don't need the node ThreadPool. This commit
removes the ThreadPool as a super constructor parameter for
TransportAction. The actions that do need the thread pool then have a
member added to keep it from their own constructor.
Historically in TcpTransport server channels were represented by the
same channel interface as socket channels. This was necessary as
TcpTransport was parameterized by the channel type. This commit
introduces TcpServerChannel and HttpServerChannel classes. Additionally,
it adds the implementations for the various transports. This allows
server channels to have unique functionality and not implement the
methods they do not support (such as send and getRemoteAddress).
Additionally, with the introduction of HttpServerChannel this commit
extracts some of the storing and closing channel work to the abstract
http server transport.
* master:
[DOCS] Omit shard failures assertion for incompatible responses (#31430)
[DOCS] Move licensing APIs to docs (#31445)
Add Delete Snapshot High Level REST API
Remove QueryCachingPolicy#ALWAYS_CACHE (#31451)
[Docs] Extend Homebrew installation instructions (#28902)
Choose JVM options ergonomically
[Docs] Mention ip_range datatypes on ip type page (#31416)
Multiplexing token filter (#31208)
Fix use of time zone in date_histogram rewrite (#31407)
Core: Remove index name resolver from base TransportAction (#31002)
[DOCS] Fixes code snippet testing for machine learning (#31189)
[DOCS] Removed and params from MLT. Closes#28128 (#31370)
Security: fix joining cluster with production license (#31341)
Unify http channels and exception handling (#31379)
[DOCS] Moves the info API to docs (#31121)
Preserve response headers on cluster update task (#31421)
[DOCS] Add code snippet testing for more ML APIs (#31404)
Do not preallocate bytes for channel buffer (#31400)
Docs: Advice for reindexing many indices (#31279)
Mute HttpExporterTests#testHttpExporterShutdown test Tracked by #31433
Docs: Add note about removing prepareExecute from the java client (#31401)
Make release notes ignore the `>test-failure` label. (#31309)
The QueryCachingPolicy#ALWAYS_CACHE was deprecated in Lucene-7.4 and
will be removed in Lucene-8.0. This change replaces it with QueryCachingPolicy.
This also makes INDEX_QUERY_CACHE_EVERYTHING_SETTING visible in testing only.
Most transport actions don't need to resolve index names. This commit
removes the index name resolver as a super constructor parameter for
TransportAction. The actions that do need the resolver then have a
member added to keep the resolver from their own constructor.
The changes made to disable security for trial licenses unless security
is explicitly enabled caused issues when a 6.3 node attempts to join a
cluster that already has a production license installed. The new node
starts off with a trial license and `xpack.security.enabled` is not
set for the node, which causes the security code to skip attaching the
user to the request. The existing cluster has security enabled and the
lack of a user attached to the requests causes the request to be
rejected.
This commit changes the security code to check if the state has been
recovered yet when making the decision on whether or not to attach a
user. If the state has not yet been recovered, the code will attach
the user to the request in case security is enabled on the cluster
being joined.
Closes#31332
This is a general cleanup of channels and exception handling in http.
This commit introduces a CloseableChannel that is a superclass of
TcpChannel and HttpChannel. This allows us to unify the closing logic
between tcp and http transports. Additionally, the normal http channels
are extracted to the abstract server transport.
Finally, this commit (mostly) unifies the exception handling between nio
and netty4 http server transports.
Currently, when we open a new channel, we pass it an
InboundChannelBuffer. The channel buffer is preallocated a single 16kb
page. However, there is no guarantee that this channel will be read from
anytime soon. Instead, this commit does not preallocate that page. That
page will be allocated when we receive a read event.
* master:
Add get stored script and delete stored script to high level REST API - post backport fix
Add get stored script and delete stored script to high level REST API (#31355)
Core: Combine Action and GenericAction (#31405)
Fix reference to XContentBuilder.string() (#31337)
Avoid sending duplicate remote failed shard requests (#31313)
Fix defaults in GeoShapeFieldMapper output (#31302)
RestAPI: Reject forcemerge requests with a body (#30792)
Packaging: Remove windows bin files from the tar distribution (#30596)
Docs: Use the default distribution to test docs (#31251)
[DOCS] Adds testing for security APIs (#31345)
Clarify that IP range data can be specified in CIDR notation. (#31374)
Use system context for cluster state update tasks (#31241)
Percentile/Ranks should return null instead of NaN when empty (#30460)
REST high-level client: add validate query API (#31077)
Move language analyzers from server to analysis-common module. (#31300)
[Test] Fix :example-plugins:rest-handler on Windows
Expose lucene's RemoveDuplicatesTokenFilter (#31275)
Reload secure settings for plugins (#31383)
Remove some cases in FieldTypeLookupTests that are no longer relevant. (#31381)
Ensure we don't use a remote profile if cluster name matches (#31331)
[TEST] Double write alias fault (#30942)
[DOCS] Fix version in SQL JDBC Maven template
[DOCS] Improve install and setup section for SQL JDBC
SQL: Fix rest endpoint names in node stats (#31371)
Support for remote path in reindex api - post backport fix Closes#22913
[ML] Put ML filter API response should contain the filter (#31362)
Support for remote path in reindex api (#31290)
Add byte array pooling to nio http transport (#31349)
Remove trial status info from start trial doc (#31365)
[DOCS] Adds links to release notes and highlights
add is-write-index flag to aliases (#30942)
Add rollover-creation-date setting to rolled over index (#31144)
[ML] Hold ML filter items in sorted set (#31338)
[Tests] Fix edge case in ScriptedMetricAggregatorTests (#31357)
Since #30966, Action no longer has anything but a call to the
GenericAction super constructor. This commit renames GenericAction
into Action, thus eliminating the Action class. Additionally, this
commit removes the Request generic parameter of the class, since
it was unused.
This commit makes it so that cluster state update tasks always run under the system context, only
restoring the original context when the listener that was provided with the task is called. A notable
exception is the clusterStatePublished(...) callback which will still run under system context,
because it's defined on the executor-level, and not the task level, and only called once for the
combined batch of tasks and can therefore not be uniquely identified with a task / thread context.
Relates #30603
This is related to #28898. This PR implements pooling of bytes arrays
when reading from the wire in the http server transport. In order to do
this, we must integrate with netty reference counting. That manner in
which this PR implements this is making Pages in InboundChannelBuffer
reference counted. When we accessing the underlying page to pass to
netty, we retain the page. When netty releases its bytebuf, it releases
the underlying pages we have passed to it.
This is related to #31325. There is currently information about the
get-trial-status api on the start-trial api documentation page. It also
has the incorrect route for that api. This commit removes that
information as the start-trial page properly links to a page providing
documenation about get-trial-status.
* master:
Upgrade to Lucene-7.4.0-snapshot-518d303506 (#31360)
Rankeval: Fold template test project into main module (#31203)
Add QA project and fixture based test for discovery-ec2 plugin (#31107)
[Docs] Remove reference to repository-s3 plugin creating an S3 bucket (#31359)
REST Client: NodeSelector for node attributes (#31296)
LLClient: Fix assertion on windows
Add details section for dcg ranking metric (#31177)
[ML] Re-enable tests muted in #30982
* master:
992c7889ee Uncouple persistent task state and status (#31031)
8c6ee7db54 Describe how to add a plugin in Dockerfile (#31340)
1c5cec0ac7 Remove http status code maps (#31350)
87a676e4d5 Do not set vm.max_map_count when unnecessary (#31285)
e5b7137508 TEST: getCapturedRequestsAndClear should be atomic (#31312)
0324103737 Painless: Fix bug for static method calls on interfaces (#31348)
d6d0727aac QA: Fix resolution of default distribution (#31351)
fcf1e41e42 Extract common http logic to server (#31311)
6dd81ead74 Build: Fix the license in the pom zip and tar (#31336)
8f886cd4be Treat ack timeout more like a publish timeout (#31303)
9b293275af [ML] Add description to ML filters (#31330)
f7a0cafe55 SQL: Fix build on Java 10
375d09c588 [TEST] Fix RemoteClusterClientTests#testEnsureWeReconnect
4877cec3e8 More detailed tracing when writing metadata (#31319)
bbfe1eccc7 [Tests] Mutualize fixtures code in BaseHttpFixture (#31210)
This pull request removes the relationship between the state
of persistent task (as stored in the cluster state) and the status
of the task (as reported by the Task APIs and used in various
places) that have been confusing for some time (#29608).
In order to do that, a new PersistentTaskState interface is added.
This interface represents the persisted state of a persistent task.
The methods used to update the state of persistent tasks are
renamed: updatePersistentStatus() becomes updatePersistentTaskState()
and now takes a PersistentTaskState as a parameter. The
Task.Status type as been changed to PersistentTaskState in all
places were it make sense (in persistent task customs in cluster
state and all other methods that deal with the state of an allocated
persistent task).
This is related to #28898. With the addition of the http nio transport,
we now have two different modules that provide http transports.
Currently most of the http logic lives at the module level. However,
some of this logic can live in server. In particular, some of the
setting of headers, cors, and pipelining. This commit begins this moving
in that direction by introducing lower level abstraction (HttpChannel,
HttpRequest, and HttpResonse) that is implemented by the modules. The
higher level rest request and rest channel work can live entirely in
server.
For 6.3 we renamed the `tar` and `zip` distributions to `oss-tar` and
`oss-zip`. Then we added new `tar` and `zip` distributions that contain
x-pack and are licensed under the Elastic License. Unfortunately we
accidentally generated POM files along side the new `tar` and `zip`
distributions that incorrectly claimed that they were Apache 2 licensed.
Oooops.
This fixes the license on the POMs generated for the `tar` and `zip`
distributions.
This adds a `description` to ML filters in order
to allow users to describe their filters in a human
readable form which is also editable (filter updates
to be added shortly).
Due to a runtime classpath clash, featureAware task was failing on JVMs
higher than 1.8 (since the ASM version from Painless was used instead
which does not recognized Java 9 or 10 bytecode) causing the task to
fail.
This commit excludes the ASM dependency (since it's not used by SQL
itself).
* master:
Remove RestGetAllAliasesAction (#31308)
Temporary fix for broken build
Reenable Checkstyle's unused import rule (#31270)
Remove remaining unused imports before merging #31270
Fix non-REST doc snippet
[DOC] Extend SQL docs
Immediately flush channel after writing to buffer (#31301)
[DOCS] Shortens ML API intros
Use quotes in the call invocation (#31249)
move security ingest processors to a sub ingest directory (#31306)
Add 5.6.11 version constant.
Fix version detection.
SQL: Whitelist SQL utility class for better scripting (#30681)
[Docs] All Rollup docs experimental, agg limitations, clarify DeleteJob (#31299)
CCS: don't proxy requests for already connected node (#31273)
Mute ScriptedMetricAggregatorTests testSelfReferencingAggStateAfterMap
[test] opensuse packaging turn up debug logging
Add unreleased version 6.3.1
Removes experimental tag from scripted_metric aggregation (#31298)
[Rollup] Metric config parser must use builder so validation runs (#31159)
[ML] Check licence when datafeeds use cross cluster search (#31247)
Add notion of internal index settings (#31286)
Test: Remove broken yml test feature (#31255)
REST hl client: cluster health to default to cluster level (#31268)
[ML] Update test thresholds to account for changes to memory control (#31289)
Log warnings when cluster state publication failed to some nodes (#31233)
Fix AntFixture waiting condition (#31272)
Ignore numeric shard count if waiting for ALL (#31265)
[ML] Implement new rules design (#31110)
index_prefixes back-compat should test 6.3 (#30951)
Core: Remove plain execute method on TransportAction (#30998)
Update checkstyle to 8.10.1 (#31269)
Set analyzer version in PreBuiltAnalyzerProviderFactory (#31202)
Modify pipelining handlers to require full requests (#31280)
Revert upgrade to Netty 4.1.25.Final (#31282)
Use armored input stream for reading public key (#31229)
Fix Netty 4 Server Transport tests. Again.
REST hl client: adjust wait_for_active_shards param in cluster health (#31266)
REST high-level Client: remove deprecated API methods (#31200)
[DOCS] Mark SQL feature as experimental
[DOCS] Updates machine learning custom URL screenshots (#31222)
Fix naming conventions check for XPackTestCase
Fix security Netty 4 transport tests
Fix race in clear scroll (#31259)
[DOCS] Clarify audit index settings when remote indexing (#30923)
Delete typos in SAML docs (#31199)
REST high-level client: add Cluster Health API (#29331)
[ML][TEST] Mute tests using rules (#31204)
Support RequestedAuthnContext (#31238)
SyncedFlushResponse to implement ToXContentObject (#31155)
Add Get Aliases API to the high-level REST client (#28799)
Remove some line length supressions (#31209)
Validate xContentType in PutWatchRequest. (#31088)
[INGEST] Interrupt the current thread if evaluation grok expressions take too long (#31024)
Suppress extras FS on caching directory tests
Revert "[DOCS] Added 6.3 info & updated the upgrade table. (#30940)"
Revert "Fix snippets in upgrade docs"
Fix snippets in upgrade docs
[DOCS] Added 6.3 info & updated the upgrade table. (#30940)
LLClient: Support host selection (#30523)
Upgrade to Netty 4.1.25.Final (#31232)
Enable custom credentials for core REST tests (#31235)
Move ESIndexLevelReplicationTestCase to test framework (#31243)
Encapsulate Translog in Engine (#31220)
HLRest: Add get index templates API (#31161)
Remove all unused imports and fix CRLF (#31207)
[Tests] Fix self-referencing tests
[TEST] Fix testRecoveryAfterPrimaryPromotion
[Docs] Remove mention pattern files in Grok processor (#31170)
Use stronger write-once semantics for Azure repository (#30437)
Don't swallow exceptions on replication (#31179)
Limit the number of concurrent requests per node (#31206)
Call ensureNoSelfReferences() on _agg state variable after scripted metric agg script executions (#31044)
Move java version checker back to its own jar (#30708)
[test] add fix for rare virtualbox error (#31212)
We currently have a specific REST action to retrieve all aliaes, which
uses internally the get index API. This doesn't seem to be required
anymore though as the existing RestGetAliaesAction could as well take
the requests with no indices and aliases specified.
This commit removes the RestGetAllAliasesAction in favour of using
RestGetAliasesAction also for requests that don't specify indices nor
aliases. Similar to #31129.
x-pack/sql depends on lang-painless which depends on ASM 5.1
FeatureAwareCheck needs ASM 6
This is a hack to strip ASM5 from the classpath for FeatureAwareCheck
This is related to #27260. Currently when we queue a write with a
channel we set OP_WRITE and wait until the next selection loop to flush
the write. However, if the channel does not have a pending write, it
is probably ready to flush. This PR implements an optimistic flush logic
that will attempt this flush.
- All rollup pages should be marked as experimental instead of just
the top page
- While the job config docs state which aggregations are allowed, adding
a section which specifically details this in one place is more convenient
for the user
- Add a clarification that the DeleteJob API does not delete the rollup
data, just the rollup job.
The parser for the Metric config was directly instantiating
the config object, rather than using the builder. That means it was
bypassing the validation logic built into the builder, and would allow
users to create invalid metric configs (like using unsupported metrics).
The job would later blow up and abort due to bad configs, but this isn't
immediately obvious to the user since the PutJob API succeeded.
This change prevents a datafeed using cross cluster search from starting if the remote cluster
does not have x-pack installed and a sufficient license. The check is made only when starting a
datafeed.
Rules allow users to supply a detector with domain
knowledge that can improve the quality of the results.
The model detects statistically anomalous results but it
has no knowledge of the meaning of the values being modelled.
For example, a detector that performs a population analysis
over IP addresses could benefit from a list of IP addresses
that the user knows to be safe. Then anomalous results for
those IP addresses will not be created and will not affect
the quantiles either.
Another example would be a detector looking for anomalies
in the median value of CPU utilization. A user might want
to inform the detector that any results where the actual
value is less than 5 is not interesting.
This commit introduces a `custom_rules` field to the `Detector`.
A detector may have multiple rules which are combined with `or`.
A rule has 3 fields: `actions`, `scope` and `conditions`.
Actions is a list of what should happen when the rule applies.
The current options include `skip_result` and `skip_model_update`.
The default value for `actions` is the `skip_result` action.
Scope is optional and allows for applying filters on any of the
partition/over/by field. When not defined the rule applies to
all series. The `filter_id` needs to be specified to match the id
of the filter to be used. Optionally, the `filter_type` can be specified
as either `include` (default) or `exclude`. When set to `include`
the rule applies to entities that are in the filter. When set to
`exclude` the rule only applies to entities not in the filter.
There may be zero or more conditions. A condition requires `applies_to`,
`operator` and `value` to be specified. The `applies_to` value can be
either `actual`, `typical` or `diff_from_typical` and it specifies
the numerical value to which the condition applies. The `operator`
(`lt`, `lte`, `gt`, `gte`) and `value` complete the definition.
Conditions are combined with `and` and allow to specify numerical
conditions for when a rule applies.
A rule must either have a scope or one or more conditions. Finally,
a rule with scope and conditions applies when all of them apply.
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
This is in preparation of pushing the new
rules design in the `ml-cpp` side. These
tests will be switched on again after merging
in the new rules implementation.
* Support RequestedAuthnContext
This implements limited support for RequestedAuthnContext by :
- Allowing SP administrators to define a list of authnContextClassRef
to be included in the RequestedAuthnContext of a SAML Authn Request
- Veirifying that the authnContext in the incoming SAML Asertion's
AuthnStatement contains one of the requested authnContextClassRef
- Only EXACT comparison is supported as the semantics of validating
the incoming authnContextClassRef are deployment dependant and
require pre-established rules for MINIMUM, MAXIMUM and BETTER
Also adds necessary AuthnStatement validation as indicated by [1] and
[2]
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
3.4.1.4, line 2250-2253
[2] https://kantarainitiative.github.io/SAMLprofiles/saml2int.html
[SDP-IDP10]
Trying to post a new watch without any body currently results in a
NullPointerException. This change fixes that by validating that
Post and Put requests always have a body.
Closes#30057
Allows users of the Low Level REST client to specify which hosts a
request should be run on. They implement the `NodeSelector` interface
or reuse a built in selector like `NOT_MASTER_ONLY` to chose which nodes
are valid. Using it looks like:
```
Request request = new Request("POST", "/foo/_search");
RequestOptions options = request.getOptions().toBuilder();
options.setNodeSelector(NodeSelector.NOT_MASTER_ONLY);
request.setOptions(options);
...
```
This introduces a new `Node` object which contains a `HttpHost` and the
metadata about the host. At this point that metadata is just `version`
and `roles` but I plan to add node attributes in a followup. The
canonical way to **get** this metadata is to use the `Sniffer` to pull
the information from the Elasticsearch cluster.
I've marked this as "breaking-java" because it breaks custom
implementations of `HostsSniffer` by renaming the interface to
`NodesSniffer` and by changing it from returning a `List<HttpHost>` to a
`List<Node>`. It *shouldn't* break anyone else though.
Because we expect to find it useful, this also implements `host_selector`
support to `do` statements in the yaml tests. Using it looks a little
like:
```
---
"example test":
- skip:
features: host_selector
- do:
host_selector:
version: " - 7.0.0" # same syntax as skip
apiname:
something: true
```
The `do` section parses the `version` string into a host selector that
uses the same version comparison logic as the `skip` section. When the
`do` section is executed it passed the off to the `RestClient`, using
the `ElasticsearchHostsSniffer` to sniff the required metadata.
The idea is to use this in mixed version tests to target a specific
version of Elasticsearch so we can be sure about the deprecation
logging though we don't currently have any examples that need it. We do,
however, have at least one open pull request that requires something
like this to properly test it.
Closes#21888
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
The core REST tests with security currently use a hardcoded username and
password. This is not amenable to running these tests in scenarios where
the user controls the creation of the cluster and owns the credentials
for this cluster. This commit enables running the core REST tests with
security with a custom username and password.
* master:
Move default location of dependencies report (#31228)
Remove dependencies report task dependencies (#31227)
Add recognition of MPL 2.0 (#31226)
Fix unknown licenses (#31223)
Remove version from license file name for GCS SDK (#31221)
Fully encapsulate LocalCheckpointTracker inside of the engine (#31213)
[DOCS] Added 'fail_on_unsupported_field' param to MLT. Closes#28008 (#31160)
Add licenses for transport-nio (#31218)
Remove DocumentFieldMappers#simpleMatchToFullName. (#31041)
Allow to trim all ops above a certain seq# with a term lower than X, post backport fix (#31211)
Compliant SAML Response destination check (#31175)
Remove DocumentFieldMappers#smartNameFieldMapper, as it is no longer needed. (#31018)
Remove extraneous references to 'tokenized' in the mapper code. (#31010)
Allow to trim all ops above a certain seq# with a term lower than X (#30176)
SQL: Make a single JDBC driver jar (#31012)
Enhance license detection for various licenses (#31198)
[DOCS] Add note about long-lived idle connections (#30990)
Move number of language analyzers to analysis-common module (#31143)
Default max concurrent search req. numNodes * 5 (#31171)
flush job to ensure all results have been written (#31187)
The goal of this commit is to address unknown licenses when producing
the dependencies info report. We have two different checks that we run
on licenses. The first check is whether or not we have stashed a copy of
the license text for a dependency in the repository. The second is to
map every dependency to a license type (e.g., BSD 3-clause). The problem
here is that the way we were handling licenses in the second check
differs from how we handle licenses in the first check. The first check
works by finding a license file with the name of the artifact followed
by the text -LICENSE.txt. Yet in some cases we allow mapping an artifact
name to another name used to check for the license (e.g., we map
lucene-.* to lucene, and opensaml-.* to shibboleth. The second check
understood the first way of looking for a license file but not the
second way. So in this commit we teach the second check about the
mappings from artifact names to license names. We do this by copying the
configuration from the dependencyLicenses task to the dependenciesInfo
task and then reusing the code from the first check in the second
check. There were some other challenges here though. For example,
dependenciesInfo was checking too many dependencies. For now, we should
only be checking direct dependencies and leaving transitive dependencies
from another org.elasticsearch artifact to that artifact (we want to do
this differently in a follow-up). We also want to disable
dependenciesInfo for projects that we do not publish, users only care
about licenses they might be exposed to if they use our assembled
products. With all of the changes in this commit we have eliminated all
unknown licenses. A follow-up will enforce that when we add a new
dependency it does not get mapped to unknown, these will be forbidden in
the future. Therefore, with this change and earlier changes are left
having no unknown licenses and two custom licenses; custom here means it
does not map to an SPDX license type. Those two licenses are xz and
ldapsdk. A future change will not allow additional custom licenses
unless they are explicitly whitelisted. This ensures that if a new
dependency is added it is mapped to an SPDX license or mapped to custom
because it does not have an SPDX license.
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
Make SAML Response Destination check compliant
Only validate the Destination element of an incoming SAML Response
if Destination is present and the SAML Response is signed.
The standard [1] - 3.5.5.2 and [2] - 3.2.2 does mention that the
Destination element is optional and should only be verified when
the SAML Response is signed. Some Identity Provider implementations
are known to not set a Destination XML Attribute in their SAML
responses when those are not signed, so this change also aims to
enhance interoperability.
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-bindings-2.0-os.pdf
[2] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
* elastic/master: (53 commits)
Painless: Restructure/Clean Up of Spec Documentation (#31013)
Update ignore_unmapped serialization after backport
Add back dropped substitution on merge
high level REST api: cancel task (#30745)
Enable engine factory to be pluggable (#31183)
Remove vestiges of animal sniffer (#31178)
Rename elasticsearch-nio to nio (#31186)
Rename elasticsearch-core to core (#31185)
Move cli sub-project out of server to libs (#31184)
[DOCS] Fixes broken link in auditing settings
QA: Better seed nodes for rolling restart
[DOCS] Moves ML content to stack-docs
[DOCS] Clarifies recommendation for audit index output type (#31146)
Add nio-transport as option for http smoke tests (#31162)
QA: Set better node names on rolling restart tests
Add support for ignore_unmapped to geo sort (#31153)
Share common parser in some AcknowledgedResponses (#31169)
Fix random failure on SearchQueryIT#testTermExpansionExceptionOnSpanFailure
Remove reference to multiple fields with one name (#31127)
Remove BlobContainer.move() method (#31100)
...
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
Today if a user omits the `_source` entirely or modifies the source
on indexing we have no chance to re-create the document after it has
been added. This is an issue for CCR and recovery based on soft deletes
which we are going to make the default. This change adds an additional
recovery source if the source is disabled or modified that is only kept
around until the document leaves the retention policy window.
This change adds a merge policy that efficiently removes this extra source
on merge for all document that are live and not in the retention policy window
anymore.
This commit adjusts the indentation in the CLI scripts to give a clear
visual indication that the line being indented is a continuation of the
previous line.
SSLTrustRestrictionsTests updates the restrictions YML file during the test run to change the set of restrictions. This update was small, but it wasn't atomic.
If the yml file is reloaded while empty or invalid, then it causes all SSL certificates to be considered invalid (until it is reloaded again), which could break the sniffing/administrative client that runs underneath the tests.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the Windows side of that effort and the Bash side was
in a previous commit.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the non-Windows side of that effort and the Windows
side will be in a follow-up.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
I pushed a test that `assertBusy`s for a whole hour accidentally. I was
testing something and forgot to revert my local hack but caught it on
backport. This removes it.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
The primary shard copy on the following has authority of the replication
operations that occur on the following side in cross-cluster
replication. Yet today we are using the primary term directly from the
operations on the leader side. Instead we should be replacing the
primary term on the following side with the primary term of the primary
on the following side. This commit does this by copying the translog
operations with the corrected primary term. This ensures that we use
this primary term while applying the operations on the primary, and when
replicating them across to the replica (where the replica request was
carrying the primary term of the primary shard copy on the follower).
The native realm's usage stats were previously pulled from the cache,
which only contains the number of users that had authenticated in the
past 20 minutes. This commit changes this so that we pull the current
value from the security index by executing a search request. In order
to support this, the usage stats for realms is now asynchronous so that
we do not block while waiting on the search to complete.
The Index Audit trail allows the override of the template index
settings with settings specified on the conf file.
A bug will manifest when such conf file settings are specified
for templates that need to be upgraded. The bug is an endless
upgrade loop because the upgrade, although successful, is
not reckoned as such by the upgrade service.
The old perform request methods on the REST client have been deprecated
in favor using request-flavored methods. This commit addresses the use
of these deprecated methods in the CCR test suite.
move `finger_print`, `pattern` and `standard_html_strip` analyzers
to analysis-common module. (both AnalysisProvider and PreBuiltAnalyzerProvider)
Changed PreBuiltAnalyzerProviderFactory to extend from PreConfiguredAnalysisComponent and
changed to make sure that predefined analyzers are always instantiated with the current
ES version and if an instance is requested for a different version then delegate to PreBuiltCache.
This is similar to the behaviour that exists today in AnalysisRegistry.PreBuiltAnalysis and
PreBuiltAnalyzerProviderFactory. (#31095)
Relates to #23658
This commit adds a check that any class in X-Pack that is a feature
aware custom also implements the appropriate mix-in interface in
X-Pack. These interfaces provide a default implementation of
FeatureAware#getRequiredFeature that returns that x-pack is the required
feature. By implementing this interface, this gives a consistent way for
X-Pack feature aware customs to return the appopriate required feature
and this check enforces that all such feature aware customs return the
appropriate required feature.
* elastic/master:
[DOCS] Creates rest-api folder in docs
[Rollup] Disallow index patterns that match the rollup index (#30491)
Add cors support to NioHttpServerTransport (#30827)
[DOCS] Fixes security example (#31082)
Allow terms query in _rollup_search (#30973)
We should not allow the user to configure index patterns that also match
the index which stores the rollup index.
For example, it is quite natural for a user to specify `metricbeat-*`
as the index pattern, and then store the rollups in `metricbeat-rolled`.
This will start throwing errors as soon as the rollup index is created
because the indexer will try to search it.
Note: this does not prevent the user from matching against existing
rollup indices. That should be prevented by the field-level validation
during job creation.
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
* master:
Removing erroneous repeat
Adapt bwc versions after backporting #30983 to 6.4
[Tests] Muting RatedRequestsTests#testXContentParsingIsNotLenient
TEST: Retry synced-flush if ongoing ops on primary (#30978)
Fix docs build.
Only auto-update license signature if all nodes ready (#30859)
Add BlobContainer.writeBlobAtomic() (#30902)
Add a doc value format to binary fields. (#30860)
* es/master:
Take into account the return value of TcpTransport.readMessageLength(...) in Netty4SizeHeaderFrameDecoder
Move caching of the size of a directory to `StoreDirectory`. (#30581)
Clarify docs about boolean operator precedence. (#30808)
Docs: remove notes on sparsity. (#30905)
Fix MatchPhrasePrefixQueryBuilderTests#testPhraseOnFieldWithNoTerms
run overflow forecast a 2nd time as regression test for elastic/ml-cpp#110 (#30969)
Improve documentation of dynamic mappings. (#30952)
Decouple MultiValueMode. (#31075)
Docs: Clarify constraints on scripted similarities. (#31076)
Update get.asciidoc (#31084)
* master:
Add get mappings support to high-level rest client (#30889)
Fix index prefixes to work with span_multi (#31066)
[DOCS] Removes redundant authorization pages
[DOCS] Re-adds custom realm
Change ObjectParser exception (#31030)
Upgrade to Lucene-7.4.0-snapshot-0a7c3f462f (#31073)
* master:
Match phrase queries against non-indexed fields should throw an exception (#31060)
In the internal highlighter APIs, use the field type as opposed to the mapper. (#31039)
[DOCS] Removes duplicated authentication pages
Enable customizing REST tests blacklist (#31074)
Make sure KeywordFieldMapper#clone preserves split_queries_on_whitespace. (#31049)
[DOCS] Moves machine learning overview to stack-docs
[ML] Add secondary sort to ML events (#31063)
[Rollup] Specialize validation exception for easier management (#30339)
Adapt bwc versions after backporting #31045 to 6.3
Remove usage of explicit type in docs (#29667)
Share common readFrom/writeTo code in AcknowledgeResponse (#30983)
Adapt bwc versions after backporting #31045 to 6.x
Mute MatchPhrase*QueryBuilderTests
[Docs] Fix typo in watcher conditions documentation (#30989)
Remove wrong link in index phrases doc
Move pipeline APIs to ingest namespace (#31027)
[DOCS] Fixes accounting setting names (#30863)
[DOCS] Rewords _field_names documentation (#31029)
Index phrases (#30450)
Remove leftover debugging from PTCMDT
Fix PTCMDT#testMinVersionSerialization
Make Persistent Tasks implementations version and feature aware (#31045)
ObjectParser should throw XContentParseExceptions, not IAE. A dedicated parsing
exception can includes the place where the error occurred.
Closes#30605
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
Extends ActionRequestValidationException with a rollup-specific version
to make it easier to handle mapping validation issues on the client
side.
The type will now be `rollup_action_request_validation_exception`
instead of `action_request_validation_exception`
The majority of Responses inheriting from AcknowledgeResponse implement
the readFrom and writeTo serialization method in the same way. Moving this
as a default into AcknowledgeResponse and letting the few exceptions that
need a slightly different implementation handle this themselves saves a lot
of duplication.
With #31020 we introduced the ability for transport clients to indicate what features they support
in order to make sure we don't serialize object to them they don't support. This PR adapts the
serialization logic of persistent tasks to be aware of those features and not serialize tasks that
aren't supported.
Also, a version check is added for the future where we may add new tasks implementations and
need to be able to indicate they shouldn't be serialized both to nodes and clients.
As the implementation relies on the interface of `PersistentTaskParams`, these are no longer
optional. That's acceptable as all current implementation have them and we plan to make
`PersistentTaskParams` more central in the future.
Relates to #30731
* master:
Avoid randomization bug in FeatureAwareTests
Adjust BWC version on client features
Add TRACE, CONNECT, and PATCH http methods (#31035)
Adjust BWC version on client features
[DOCS] Make geoshape docs less memory hungry (#31014)
Fix handling of percent-encoded spaces in Windows batch files (#31034)
[Docs] Fix a typo in Create Index naming limitation (#30891)
Introduce client feature tracking (#31020)
Ensure that index_prefixes settings cannot be changed (#30967)
REST high-level client: add delete ingest pipeline API (#30865)
[ML][TEST] Fix bucket count assertion in all tests in ModelPlotsIT (#31026)
Allow rollup job creation only if cluster is x-pack ready (#30963)
Fix interoperability with < 6.3 transport clients (#30971)
Add an option to split keyword field on whitespace at query time (#30691)
[Tests] Fix alias names in PutIndexTemplateRequestTests (#30960)
REST high-level client: add get ingest pipeline API (#30847)
Cross Cluster Search: preserve remote status code (#30976)
High-level client: list tasks failure to not lose nodeId (#31001)
[DOCS] Fixes links (#31011)
Watcher: Give test a little more time
Reuse expiration date of trial licenses (#30950)
Remove unused query methods from MappedFieldType. (#30987)
Transport client: Don't validate node in handshake (#30737)
[DOCS] Clarify not all PKCS12 usable as truststores (#30750)
HLRest: Allow caller to set per request options (#30490)
Remove version read/write logic in Verify Response (#30879)
[DOCS] Update readme for testing x-pack code snippets (#30696)
Ensure intended key is selected in SamlAuthenticatorTests (#30993)
Core: Remove RequestBuilder from Action (#30966)
If you invoke elasticsearch-plugin (or any other CLI script on Windows)
with a path that has a percent-encoded space (or any other
percent-encoded character) because the CLI scripts now shell into a
common shell script (elasticsearch-cli) the percent-encoded space ends
up being interpreted as a parameter. For example passing install --batch
file:/c:/encoded%20%space/analysis-icu-7.0.0.zip to elasticsearch-plugin
leads to the %20 being interpreted as %2 followed by a zero. Here, the
%2 is interpreted as the second parameter (--batch) and the
InstallPluginCommand class ends up seeing
file:/c/encoded--batch0space/analysis-icu-7.0.0.zip as the path which
will not exist. This commit addresses this by escaping the %* that is
used to pass the parameters to the common CLI script so that the common
script sees the correct parameters without the %2 being substituted.
This commit introduces the ability for a client to communicate to the
server features that it can support and for these features to be used in
influencing the decisions that the server makes when communicating with
the client. To this end we carry the features from the client to the
underlying stream as we carry the version of the client today. This
enables us to enhance the logic where we make protocol decisions on the
basis of the version on the stream to also make protocol decisions on
the basis of the features on the stream. With such functionality, the
client can communicate to the server if it is a transport client, or if
it has, for example, X-Pack installed. This enables us to support
rolling upgrades from the OSS distribution to the default distribution
without breaking client connectivity as we can now elect to serialize
customs in the cluster state depending on whether or not the client
reports to us using the feature capabilities that it can under these
customs. This means that we would avoid sending a client pieces of the
cluster state that it can not understand. However, we want to take care
and always send the full cluster state during node-to-node communication
as otherwise we would end up with different understanding of what is in
the cluster state across nodes depending on which features they reported
to have. This is why when deciding whether or not to write out a custom
we always send the custom if the client is not a transport client and
otherwise do not send the custom if the client is transport client that
does not report to have the feature required by the custom.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Otherwise we could end up with persistent tasks metadata in the cluster that some of the nodes
might not understand in case where the cluster is during rolling upgrade from the default 6.2 to the
default 6.3 distribution.
Follow-up to #30743
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This commit clarifies the origin of the global checkpoint that the
following shard uses and replaces illegal_state_exc E by an assertion.
Relates #30980
* master:
Deprecates indexing and querying a context completion field without context (#30712)
Refactor Sniffer and make it testable (#29638)
[Docs] Fix typo in Min Aggregation reference (#30899)
* Retain the expiryDate for trial licenses
While updating the license signature to the new license spec retain
the trial license expiration date to that of the existing license.
Resolves#30882
Today before reading operations on the leading shard, we minimization
the requesting range with the global checkpoint. However, this might
make the request invalid if the following shard generates a requesting
range based on the global-checkpoint from a primary shard and sends
that request to a replica whose global checkpoint is lagged.
Another issue is that we are mutating the request when applying
minimization. If the request becomes invalid on a replica, we will
reroute the mutated request instead of the original one to the primary.
This commit removes the minimization and replaces it by a range check
with the local checkpoint.
Although elasticsearch-certutil generates PKCS#12
files which are usable as both keystore and truststore
this is uncommon in practice. Settle these expectations
for the users following our security guides.
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
* Ensure that a purposefully wrong key is used
Uses a specific keypair for tests that require a purposefully wrong
keypair instead of selecting one randomly from the same pull from
which the correct one is selected. Entropy is low because of the
small space and the same key can be randomly selected as both the
correct one and the wrong one, causing the tests to fail.
The purposefully wrong key is also used in
testSigningKeyIsReloadedForEachRequest and needs to be cleaned
up afterwards so the rest of the tests don't use that for signing.
Resolves#30970
This commit removes the RequestBuilder generic type from Action. It was
needed to be used by the newRequest method, which in turn was used by
client.prepareExecute. Both of these methods are now removed, along with
the existing users of prepareExecute constructing the appropriate
builder directly.
This commit reworks the Sniffer component to simplify it and make it possible to test it.
In particular, it no longer takes out the host that failed when sniffing on failure, but rather relies on whatever the cluster returns. This is the result of some valid comments from #27985. Taking out one single host is too naive, hard to test and debug.
A new Scheduler abstraction is introduced to abstract the tasks scheduling away and make it possible to plug in any test implementation and take out timing aspects when testing.
Concurrency aspects have also been improved, synchronized methods are no longer required. At the same time, we were able to take #27697 and #25701 into account and fix them, especially now that we can more easily add tests.
Last but not least, unit tests are added for the Sniffer component, long overdue.
Closes#27697Closes#25701
* master:
[CI] Mute Ml rolling upgrade tests
Fix license on AcitveDirectorySIDUtil (#30972)
[Test] Prefer ArrayList over Vector (#30965)
[CI] Mute HttpSecretsIntegrationTests#testWebhookAction test
Mute FlushIT tests
Add “took” timing info to response for _msearch/template API (#30961)
This code is from an Apache 2.0 licensed codebase and when we imported
it into our codebase it carried the Apache 2.0 license as well. However,
during the migration of the X-Pack codebase from the internal private
repository to the elastic/elasticsearch repository, the migration tool
mistakently changed the license on this source file from the Apache 2.0
license to the Elastic license. This commit addresses this mistake by
reapplying the Apache 2.0 license.
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
* es/master: (24 commits)
Add missing_bucket option in the composite agg (#29465)
Rename index_prefix to index_prefixes (#30932)
Rename methods in PersistentTasksService (#30837)
[DOCS] Fix watcher file location
Update the version checks around range bucket keys, now that the change was backported.
Use dedicated ML APIs in tests (#30941)
[DOCS] Remove reference to platinum Docker image (#30916)
Minor clean-up in InternalRange. (#30886)
stable filemode for zip distributions (#30854)
[DOCS] Adds missing TLS settings for auditing (#30822)
[test] packaging: use shell when running commands (#30852)
Fix location of AbstractHttpServerTransport (#30888)
[test] packaging test logging for suse distros
Moved keyword tokenizer to analysis-common module (#30642)
Upgrade to Lucene-7.4-snapshot-1cbadda4d3 (#30928)
Limit the scope of BouncyCastle dependency (#30358)
[DOCS] Reset edit links (#30909)
Fix IndexTemplateMetaData parsing from xContent (#30917)
Remove log traces in AzureStorageServiceImpl and fix test (#30924)
Deprecate accepting malformed requests in stored script API (#28939)
...
This commit renames methods in the PersistentTasksService, to
make obvious that the methods send requests in order to change
the state of persistent tasks.
Relates to #29608.
ML has dedicated APIs for datafeeds and jobs yet base test classes and
some tests were relying on the cluster state for this state. This commit
removes this usage in favor of using the dedicated endpoints.
Limits the scope of the runtime dependency on
BouncyCastle so that it can be eventually removed.
* Splits functionality related to reading and generating certificates
and keys in two utility classes so that reading certificates and
keys doesn't require BouncyCastle.
* Implements a class for parsing PEM Encoded key material (which also
adds support for reading PKCS8 encoded encrypted private keys).
* Removes BouncyCastle dependency for all of our test suites(except
for the tests that explicitly test certificate generation) by using
pre-generated keys/certificates/keystores.
* master:
silence InstallPluginCommandTests, see https://github.com/elastic/elasticsearch/issues/30900
Remove left-over comment
Fix double semicolon in import statement
[TEST] Fix minor random bug from #30794
Include size of snapshot in snapshot metadata #18543, bwc clean up (#30890)
Enabling testing against an external cluster (#30885)
Add public key header/footer (#30877)
SQL: Remove the last remaining server dependencies from jdbc (#30771)
Include size of snapshot in snapshot metadata (#29602)
Do not serialize basic license exp in x-pack info (#30848)
Change BWC version for VerifyRepositoryResponse (#30796)
[DOCS] Document index name limitations (#30826)
Harmonize include_defaults tests (#30700)
The shard changes api returns the minimum IndexMetadata version the leader
index needs to have. If the leader side is behind on IndexMetadata version
then follow shard task waits with processing write operations until the
mapping has been fetched from leader index and applied in follower index
in the background.
The cluster state api is used to fetch the leader mapping and put mapping api
to apply the mapping in the follower index. This works because put mapping
api accepts fields that are already defined.
Relates to #30086
Removes the last remaining server dependencies from jdbc client. In order to do that it introduces the new project sql-shared-proto that contains only XContent-serializable classes. HTTP Client and JDBC now depend only on sql-shared-proto. I had to keep the original sql-proto project since it is used as a dependency by sql-cli and security integration tests.
Relates #29856
This is a bug that was identified by the kibana team. Currently on a
get-license call we do not serialize the hard-coded expiration for basic
licenses. However, the kibana team calls the x-pack info route which
still does serialize the expiration date. This commit removes that
serialization in the rest response.
* es/master:
Move score script context from SearchScript to its own class (#30816)
Fix bad version check writing Repository nodes (#30846)
[docs] explainer for java packaging tests (#30825)
Remove Throwable usage from transport modules (#30845)
REST high-level client: add put ingest pipeline API (#30793)
Update the version checks around ip_range bucket keys, now that the change was backported.
Mute IndexMasterFailoverIT.testMasterFailoverDuringIndexingWithMappingChanges
Use geohash cell instead of just a corner in geo_bounding_box (#30698)
Limit user to single concurrent auth per realm (#30794)
[Tests] Move templated _rank_eval tests (#30679)
Security: fix dynamic mapping updates with aliases (#30787)
Ensure that ip_range aggregations always return bucket keys. (#30701)
Use remote client in TransportFieldCapsAction (#30838)
Move Watcher versioning setting to meta field (#30832)
[Docs] Explain incomplete dates in range queries (#30689)
Move persistent task registrations to core (#30755)
Decouple ClusterStateTaskListener & ClusterApplier (#30809)
Send client headers from TransportClient (#30803)
Packaging: Ensure upgrade_is_oss flag file is always deleted (#30732)
Force stable file modes for built packages (#30823)
Currently nio and netty modules use the CompletableFuture class for
managing listeners. This is unfortunate as that class accepts
Throwable. This commit adds a class CompletableContext that wraps
the CompletableFuture but does not accept Throwable. This allows the
modification of netty and nio logic to no longer handle Throwable.
This commit reworks the way our realms perform caching in order to
limit each principal to a single ongoing authentication per realm. In
other words, this means that multiple requests made by the same user
will not trigger more that one authentication attempt at a time if no
entry has been stored in the cache. If an entry is present in our
cache, there is no restriction on the number of concurrent
authentications performed for this user.
This change enables us to limit the load we place on an external system
like an LDAP server and also preserve resources such as CPU on
expensive operations such as BCrypt authentication.
Closes#30355
This commit fixes an issue with dynamic mapping updates when an index
operation is performed against an alias and when the user only has
permissions to the alias. Dynamic mapping updates resolve the concrete
index early to prevent issues so the information about the alias that
the triggering operation was being executed against is lost. When
security is enabled and a user only has privileges to the alias, this
dynamic mapping update would be rejected as it is executing against the
concrete index and not the alias. In order to handle this situation,
the security code needs to look at the concrete index and the
authorized indices of the user; if the concrete index is not authorized
the code will attempt to find an alias that the user has permissions to
update the mappings of.
Closes#30597
The .watcher-history-* template is currently using a plugin-custom index setting xpack.watcher.template.version,
which prevents this template from being installed in a mixed OSS / X-Pack cluster, ultimately
leading to the situation where an X-Pack node is constantly spamming an OSS master with (failed)
template updates. Other X-Pack templates (e.g. security-index-template or security_audit_log)
achieve the same versioning functionality by using a custom _meta field in the mapping instead.
This commit switches the .watcher-history-* template to use the _meta field instead.
Persistent tasks was moved from X-Pack to core in #28455.
However, registration of the named writables and named
X-content was left in X-Pack.
This change moves the registration of the named writables
and named X-content into core. Additionally, the persistent
task actions are no longer registered in the X-Pack client
plugin, as they are already registered in ActionModule.
This change adds a simple header to the transport client
that is present on the servers thread context that ensures
we can detect if a transport client talks to the server in a
specific request. This change also adds a header for xpack
to detect if the client has xpack installed.
* master:
[DOCS] Fixes typos in security settings
Fix GeoShapeQueryBuilder serialization after backport
[DOCS] Splits auditing.asciidoc into smaller files
Reintroduce mandatory http pipelining support (#30820)
Painless: Types Section Clean Up (#30283)
Add support for indexed shape routing in geo_shape query (#30760)
[test] java tests for archive packaging (#30734)
Revert "Make http pipelining support mandatory (#30695)" (#30813)
[DOCS] Fix more edit URLs in Stack Overview (#30704)
Use correct cluster state version for node fault detection (#30810)
Change serialization version of doc-value fields.
[DOCS] Fixes broken link for native realm
[DOCS] Clarified audit.index.client.hosts (#30797)
[TEST] Don't expect acks when isolating nodes
Add a `format` option to `docvalue_fields`. (#29639)
Fixes UpdateSettingsRequestStreamableTests mutate bug
Mustes {p0=snapshot.get_repository/10_basic/*} YAML test
Revert "Mutes MachineLearningTests.testNoAttributes_givenSameAndMlEnabled"
Only allow x-pack metadata if all nodes are ready (#30743)
Mutes MachineLearningTests.testNoAttributes_givenSameAndMlEnabled
Use original settings on full-cluster restart (#30780)
Only ack cluster state updates successfully applied on all nodes (#30672)
Expose Lucene's FeatureField. (#30618)
Fix a grammatical error in the 'search types' documentation.
Remove http pipelining from integration test case (#30788)
This commit reintroduces 31251c9 and 63a5799. These commits introduced a
memory leak and were reverted. This commit brings those commits back
and fixes the memory leak by removing unnecessary retain method calls.
This reverts commit 31251c9 introduced in #30695.
We suspect this commit is causing the OOME's reported in #30811 and we will use this PR to test this assertion.
This commit adds the ability to configure how a docvalue field should be
formatted, so that it would be possible eg. to return a date field
formatted as the number of milliseconds since Epoch.
Closes#27740
Enables a rolling restart from the OSS distribution to the x-pack based distribution by preventing
x-pack code from installing custom metadata into the cluster state until all nodes are capable of
deserializing this metadata.
When doing a node restart using the test framework, the restarted node does not only use the
settings provided to the original node, but also additional settings provided by plugin extensions,
which does not correspond to the settings that a node would have on a true restart.
This is related to #29500. We are removing the ability to disable http
pipelining. This PR removes the references to disabling pipelining in
the integration test case.
* master:
QA: Add xpack tests to rolling upgrade (#30795)
Modify state of VerifyRepositoryResponse for bwc (#30762)
Reduce CLI scripts to one-liners on Windows (#30772)
Simplify number of shards setting (#30783)
Replace Request#setHeaders with addHeader (#30588)
[TEST] remove endless wait in RestClientTests (#30776)
[Docs] Fix script-fields snippet execution (#30693)
Upgrade to Lucene-7.4.0-snapshot-cc2ee23050 (#30778)
[DOCS] Add SAML configuration information (#30548)
[DOCS] Remove X-Pack references from SQL CLI (#30694)
Make http pipelining support mandatory (#30695)
[Docs] Fix typo in circuit breaker docs (#29659)
[Feature] Adding a char_group tokenizer (#24186)
[Docs] Fix broken cross link in documentation
Test: wait for netty threads in a JUnit ClassRule (#30763)
Increase the maximum number of filters that may be in the cache. (#30655)
[Security] Include an empty json object in an json array when FLS filters out all fields (#30709)
[TEST] Wait for CS to be fully applied in testDeleteCreateInOneBulk
Add more yaml tests for get alias API (#29513)
Ignore empty completion input (#30713)
[DOCS] fixed incorrect default
[ML] Filter undefined job groups from update calendar actions (#30757)
Fix docs failure on language analyzers (#30722)
[Docs] Fix inconsistencies in snapshot/restore doc (#30480)
Enable installing plugins from snapshots.elastic.co (#30765)
Remove fedora 26, add 28 (#30683)
Accept Gradle build scan agreement (#30645)
Remove logging from elasticsearch-nio jar (#30761)
Add Delete Repository High Level REST API (#30666)
This commit reduces the Windows CLI scripts to one-liners by moving all
of the redundant logic to an elasticsearch-cli script. This commit is
only the Windows side, a previous commit covered the Linux side.
Adding headers rather than setting them all at once seems more
user-friendly and we already do it in a similar way for parameters
(see Request#addParameter).
The new snapshot includes LUCENE-8324 which fixes missing checkpoint
after a fully deletes segment is dropped on flush. This snapshot should
resolves failed tests in the CorruptedFileIT suite.
Closes#30741Closes#30577
This commit changes the wait for a few netty threads to wait for these
threads to complete after the cluster has stopped. Previously, we were
waiting for these threads before the cluster was actually stopped; the
cluster is stopped in an AfterClass method of ESIntegTestCase, while
the wait was performed in the AfterClass of a class that extended
ESIntegTestCase, which is always executed before the AfterClass of
ESIntegTestCase.
Now, the wait is contained in an ExternalResource ClassRule that
implements the waiting for the threads to terminate in the after
method. This rule is executed after the AfterClass method in
ESIntegTestCase. The same fix has also been applied in
SecuritySingleNodeTestCase.
Closes#30563
Prior to this change an json array element with no fields would be omitted from json array.
Nested inner hits source filtering relies on the fact that the json array element numbering
remains untouched and this causes AOOB exceptions in the ES side during the fetch phase
without this change.
Closes#30624
This is related to #27260. The elasticsearch-nio jar is supposed to be
a library opposed to a framework. Currently it internally logs certain
exceptions. This commit modifies it to not rely on logging. Instead
exception handlers are passed by the applications that use the jar.
* master:
Reduce CLI scripts to one-liners (#30759)
SQL: Preserve scoring in bool queries (#30730)
QA: Switch rolling upgrade to 3 nodes (#30728)
[TEST] Enable DEBUG logging on testAutoQueueSizingWithMax
[ML] Don't install empty ML metadata on startup (#30751)
Add assertion on removing copy_settings (#30748)
bump lucene version for 6_3_0
[DOCS] Mark painless execute api as experimental (#30710)
disable annotation processor for docs (#30610)
Add more script contexts (#30721)
Fix default shards count in create index docs (#30747)
Mute testCorruptFileThenSnapshotAndRestore
This commit reduces the Linux CLI scripts to one-liners by moving all of
the redundant logic to an elasticsearch-cli script. This commit is only
the Linux side, a follow-up will do this for Windows too.
Make all bool constructs use match/should (that is a query context) as
that is controlled and changed to a filter context by ES automatically
based on the sort order (_doc, field vs _sort) and trackScores.
Fix#29685
This change is to support rolling upgrade from a pre-6.3 default
distribution (i.e. without X-Pack) to a 6.3+ default distribution
(i.e. with X-Pack).
The ML metadata is no longer eagerly added to the cluster state
as soon as the master node has X-Pack available. Instead, it
is added when the first ML job is created.
As a result all methods that get the ML metadata need to be able
to handle the situation where there is no ML metadata in the
current cluster state. They do this by behaving as though an
empty ML metadata was present. This logic is encapsulated by
always asking for the current ML metadata using a static method
on the MlMetadata class.
Relates #30731
* master:
Scripting: Remove getDate methods from ScriptDocValues (#30690)
Upgrade to Lucene-7.4.0-snapshot-59f2b7aec2 (#30726)
[Docs] Fix single page :docs:check invocation (#30725)
Docs: Add uptasticsearch to list of clients (#30738)
[DOCS] Removes out-dated x-pack/docs/en/index.asciidoc
[DOCS] Removes redundant index.asciidoc files (#30707)
[TEST] Reduce forecast overflow to disk test memory limit (#30727)
Plugins: Remove meta plugins (#30670)
[DOCS] Moves X-Pack configurationg pages in table of contents (#30702)
TEST: Add engine log to testCorruptFileThenSnapshotAndRestore
[ML][TEST] Fix bucket count assertion in ModelPlotsIT (#30717)
[ML][TEST] Make AutodetectMemoryLimitIT less fragile (#30716)
Default copy settings to true and deprecate on the REST layer (#30598)
[Build] Add test admin when starting gradle run with trial license and
This implementation lazily (on 1st forecast request) checks for available diskspace and creates a subfolder for storing data outside of Lucene indexes, but as part of the ES data paths.
Tests: Fail if test watches could not be triggered (#30392)
[ML] add version information in case of crash of native ML process (#30674)
Make TransportClusterStateAction abide to our style (#30697)
Change required version for Get Settings transport API changes to 6.4.0 (#30706)
[DOCS] Fixes edit URLs for stack overview (#30583)
Silence sleep based watcher test
[TEST] Adjust version skips for movavg/movfn tests
[DOCS] Replace X-Pack terms with attributes
[ML] Clean left behind model state docs (#30659)
Correct typos
filters agg docs duplicated 'bucket' word removal (#30677)
top_hits doc example description update (#30676)
[Docs] Replace InetSocketTransportAddress with TransportAdress (#30673)
[TEST] Account for increase in ML C++ memory usage (#30675)
User proper write-once semantics for GCS repository (#30438)
Remove bogus file accidentally added
Add detailed assert message to IndexAuditUpgradeIT (#30669)
Adjust fast forward for token expiration test (#30668)
Improve explanation in rescore (#30629)
Deprecate `nGram` and `edgeNGram` names for ngram filters (#30209)
Watcher: Fix watch history template for dynamic slack attachments (#30172)
Fix _cluster/state to always return cluster_uuid (#30656)
[Tests] Add debug information to CorruptedFileIT
# Conflicts:
# test/framework/src/main/java/org/elasticsearch/indices/analysis/AnalysisFactoryTestCase.java
Ioannis Kakavas
Jason Tedor
David Roberts
Zachary Tong
Zachary Tong
Tanguy Leroux
Alexander Reelsen
Nhat Nguyen
Shaunak Kashyap
Jay Modi
Andrei Stefan
Colin Goodheart-Smithe
Yannick Welsch
Dimitris Athanasiou
David Kyle
David Turner
Benjamin Trent
Nik Everett
Armin Braun
Lisa Cawley
Igor Motov
Daniel Mitterdorfer
Yogesh Gaikwad
Tim Vernum
Jim Ferenczi
Jack Conradson
Christoph Büscher
Tim Vernum
Lee Hinman
Andy Bristol
Nicolas Ruflin
Martijn van Groningen
Luca Cavanna
Tal Levy
Ryan Ernst
Alpar Torok
Michael Basnight
Tim Brooks
Julie Tibshirani
Toby McLaughlin
Ioannis Kakavas
Costin Leau
Jim Ferenczi
Tom Veasey
Boaz Leskes
albendz
Damien Alexandre
hanbj
Sohaib Iftikhar
Vladimir Dolzhenko
Costin Leau
Simon Willnauer
Hendrik Muhs
Konrad Beiske
Zachary Tong
Adrien Grand
markharwood
James Baiera
Albert Zaharovits
Yuri Tceretian
Aditya Dhulipala
Michael Russell