Restoring from a snapshot (which is a particular form of recovery) does not currently take recovery throttling into account
(i.e. the `indices.recovery.max_bytes_per_sec` setting). While restores are subject to their own throttling (repository
setting `max_restore_bytes_per_sec`), this repository setting does not allow for values to be configured differently on a
per-node basis. As restores are very similar in nature to peer recoveries (streaming bytes to the node), it makes sense to
configure throttling in a single place.
The `max_restore_bytes_per_sec` setting is also changed to default to unlimited now, whereas previously it was set to
`40mb`, which is the current default of `indices.recovery.max_bytes_per_sec`). This means that no behavioral change
will be observed by clusters where the recovery and restore settings were not adapted.
Relates https://github.com/elastic/elasticsearch/issues/57023
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
SAML idP sends back a LogoutResponse at the end of the logout workflow. It can be sent via either HTTP-Redirect binding or HTTP-POST binding. Currently, the HTTP-Redirect request is simply ignored by Kibana and never reaches ES. It does not cause any obvious issue and the workflow is completed normally from user's perspective.
The HTTP-POST request results in a 404 error because POST request is not accepted by Kibana's logout end-point. This causes a non-trivial issue because it renders an error page in user's browser. In addition, some resources do not seem to be fully cleaned up due to the error, e.g. the username will be pre-filled when trying to login again after the 404 error.
This PR solves both of the above issues from ES side with a new /_security/saml/complete_logout end-point. Changes are still needed on Kibana side to relay the messages.
Backport of #58419
Mapping updates that originate from indexing a document with unmapped fields will use this new action
instead of the current put mapping action. This way on the security side, authorization logic
can easily determine whether a mapping update is automatically generated or a mapping update originates
from the put mapping api.
The new auto put mapping action is only used if all nodes are on the version that supports it.
This PR implements recursive mapping merging for composable index templates.
When creating an index, we perform the following:
* Add each component template mapping in order, merging each one in after the
last.
* Merge in the index template mappings (if present).
* Merge in the mappings on the index request itself (if present).
Some principles:
* All 'structural' changes are disallowed (but everything else is fine). An
object mapper can never be changed between `type: object` and `type: nested`. A
field mapper can never be changed to an object mapper, and vice versa.
* Generally, each section is merged recursively. This includes `object`
mappings, as well as root options like `dynamic_templates` and `meta`. Once we
reach 'leaf components' like field definitions, they always overwrite an
existing one instead of being merged.
Relates to #53101.
When per_partition_categorization.stop_on_warn is set for an analysis
config it is now passed through to the autodetect C++ process.
Also adds some end-to-end tests that exercise the functionality
added in elastic/ml-cpp#1356
Backport of #58632
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
RandomZone test method returns a ZoneId from the set of ids supported by
java. The only difference between joda and java supported timezones are
SystemV* timezones.
These should be excluded from randomZone method as they would break
testing. They also do not bring much confidence when used in testing as
I suspect they are rarely used.
That exclude should be removed for simplification once joda support is removed.
This commit adds the BuildParams.testSeed to the repository base paths used
in searchable snapshots QA tests. For S3 and GCS the test seed is added for
coherency sake with other integration tests while it's required for Azure as
Azure 3rd party tests are executed on CI simultaneously for regular and
SAS token accounts.
Closes#58260
The GET /_license endpoint displays "enterprise" licenses as
"platinum" by default so that old clients (including beats, kibana and
logstash) know to interpret this new license type as if it were a
platinum license.
However, this compatibility layer was not applied to the GET /_xpack/
endpoint which also displays a license type & mode.
This commit causes the _xpack API to mimic the _license API and treat
enterprise as platinum by default, with a new accept_enterprise
parameter that will cause the API to return the correct "enterprise"
value.
This BWC layer exists only for the 7.x branch.
This is a breaking change because, since 7.6, the _xpack API has
returned "enterprise" for enterprise licenses, but this has been found
to break old versions of beats and logstash so needs to be corrected.
EQL sequences can specify now a maximum time allowed for their span
(computed between the first and the last matching event).
(cherry picked from commit 747c3592244192a2e25a092f62aec91a899afc83)
* EQL: case sensitivity aware integration testing (#58624)
* Add DataLoader
* Rewrite case sensitivity settings:
NULL -> run both case sensitive and insensitive tests
TRUE -> run case sensitive test only
FALSE -> run case insensitive test only
* Rename test_queries_supported
* Add more toml tests from the Python client
Co-authored-by: Ross Wolf <31489089+rw-access@users.noreply.github.com>
(cherry picked from commit 34d383421599f060a5c083b40df35f135de49e39)
SparseFileTracker.Gap can keep a reference to the corresponding range it is about to fill,
it does not need to resolve the range each time onSuccess/onProgress/onFailure are
called.
Relates #58477
The remote_monitoring_user user needs to access the enrich stats API.
But the request is denied because the API is categorized under admin.
The correct privilege should be monitor.
Adds parsing of `status` and `memory_reestimate_bytes`
to data frame analytics `memory_usage`. When the training surpasses
the model memory limit, the status will be set to `hard_limit` and
`memory_reestimate_bytes` can be used to update the job's
limit in order to restart the job.
Backport of #58588
Introduce pipe support, in particular head and tail
(which can also be chained).
(cherry picked from commit 4521ca3367147d4d6531cf0ab975d8d705f400ea)
(cherry picked from commit d6731d659d012c96b19879d13cfc9e1eaf4745a4)
Today SparseFileTracker allows to wait for a range to become available
before executing a given listener. In the case of searchable snapshot,
we'd like to be able to wait for a large range to be filled (ie, downloaded
and written to disk) while being able to execute the listener as soon as
a smaller range is available.
This pull request is an extract from #58164 which introduces a
ProgressListenableActionFuture that is used internally by
SparseFileTracker. The progressive listenable future allows to register
listeners attached to SparseFileTracker.Gap so that they are executed
once the Gap is completed (with success or failure) or as soon as the
Gap progress reaches a given progress value. This progress value is
defined when the tracker.waitForRange() method is called; this method
has been modified to accept a range and another listener's range to
operate on.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
If a project is pulling in an external org.elasticsearch dependency, the dependency
report generation would require a license file for the dependency to be present.
This would break precommit because a license was present that it did not feel was
warranted. This un-reverts the update to the dependenciesInfo task, as well as the
JNA license addition.
In SLM retention, when a minimum number of snapshots is required for retention, we prefer to remove
the oldest snapshots first. To perform this, we limit one of the streams, in a rare case this can
cause:
```
[mynode] error during snapshot retention task
java.lang.IllegalArgumentException: -5
at java.util.stream.ReferencePipeline.limit(ReferencePipeline.java:469) ~[?:?]
at org.elasticsearch.xpack.core.slm.SnapshotRetentionConfiguration.lambda$getSnapshotDeletionPredicate$6(SnapshotRetentionConfiguration.java:195) ~[?:?]
at org.elasticsearch.xpack.slm.SnapshotRetentionTask.snapshotEligibleForDeletion(SnapshotRetentionTask.java:245) ~[?:?]
at org.elasticsearch.xpack.slm.SnapshotRetentionTask$1.lambda$onResponse$0(SnapshotRetentionTask.java:163) ~[?:?]
at java.util.stream.ReferencePipeline$2$1.accept(ReferencePipeline.java:176) ~[?:?]
at java.util.ArrayList$ArrayListSpliterator.forEachRemaining(ArrayList.java:1624) ~[?:?]
at java.util.stream.AbstractPipeline.copyInto(AbstractPipeline.java:484) ~[?:?]
at java.util.stream.AbstractPipeline.wrapAndCopyInto(AbstractPipeline.java:474) ~[?:?]
at java.util.stream.ReduceOps$ReduceOp.evaluateSequential(ReduceOps.java:913) ~[?:?]
```
When certain criteria are met. This commit fixes the negative limiting with `Math.max(0, ...)` and
adds a unit test for the behavior.
Resolves#58515
Rather than let ExtensiblePlugins know extending plugins' classloaders,
we now pass along an explicit ExtensionLoader that loads the extensions
asked for. Extensions constructed that way can optionally receive their
own Plugin instance in the constructor.
Today we have individual settings for configuring node roles such as
node.data and node.master. Additionally, roles are pluggable and we have
used this to introduce roles such as node.ml and node.voting_only. As
the number of roles is growing, managing these becomes harder for the
user. For example, to create a master-only node, today a user has to
configure:
- node.data: false
- node.ingest: false
- node.remote_cluster_client: false
- node.ml: false
at a minimum if they are relying on defaults, but also add:
- node.master: true
- node.transform: false
- node.voting_only: false
If they want to be explicit. This is also challenging in cases where a
user wants to have configure a coordinating-only node which requires
disabling all roles, a list which we are adding to, requiring the user
to keep checking whether a node has acquired any of these roles.
This commit addresses this by adding a list setting node.roles for which
a user has explicit control over the list of roles that a node has. If
the setting is configured, the node has exactly the roles in the list,
and not any additional roles. This means to configure a master-only
node, the setting is merely 'node.roles: [master]', and to configure a
coordinating-only node, the setting is merely: 'node.roles: []'.
With this change we deprecate the existing 'node.*' settings such as
'node.data'.
* [ML] make waiting for renormalization optional for internally flushing job (#58537)
When flushing, datafeeds only need the guaruntee that the latest bucket has been handled.
But, in addition to this, the typical call to flush waits for renormalization to complete. For large jobs, this can take a fair bit of time (even longer than a bucket length). This causes unnecessary delays in handling data.
This commit adds a new internal only flag that allows datafeeds (and forecasting) to skip waiting on renormalization.
closes#58395
Implements a new histogram aggregation called `variable_width_histogram` which
dynamically determines bucket intervals based on document groupings. These
groups are determined by running a one-pass clustering algorithm on each shard
and then reducing each shard's clusters using an agglomerative
clustering algorithm.
This PR addresses #9572.
The shard-level clustering is done in one pass to minimize memory overhead. The
algorithm was lightly inspired by
[this paper](https://ieeexplore.ieee.org/abstract/document/1198387). It fetches
a small number of documents to sample the data and determine initial clusters.
Subsequent documents are then placed into one of these clusters, or a new one
if they are an outlier. This algorithm is described in more details in the
aggregation's docs.
At reduce time, a
[hierarchical agglomerative clustering](https://en.wikipedia.org/wiki/Hierarchical_clustering)
algorithm inspired by [this paper](https://arxiv.org/abs/1802.00304)
continually merges the closest buckets from all shards (based on their
centroids) until the target number of buckets is reached.
The final values produced by this aggregation are approximate. Each bucket's
min value is used as its key in the histogram. Furthermore, buckets are merged
based on their centroids and not their bounds. So it is possible that adjacent
buckets will overlap after reduction. Because each bucket's key is its min,
this overlap is not shown in the final histogram. However, when such overlap
occurs, we set the key of the bucket with the larger centroid to the midpoint
between its minimum and the smaller bucket’s maximum:
`min[large] = (min[large] + max[small]) / 2`. This heuristic is expected to
increases the accuracy of the clustering.
Nodes are unable to share centroids during the shard-level clustering phase. In
the future, resolving https://github.com/elastic/elasticsearch/issues/50863
would let us solve this issue.
It doesn’t make sense for this aggregation to support the `min_doc_count`
parameter, since clusters are determined dynamically. The `order` parameter is
not supported here to keep this large PR from becoming too complex.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
The main changes are:
1. Catch the `NamedObjectNotFoundException` when parsing aggregation
type, and then throw a `ParsingException` with clear error message with hint.
2. Add a unit test method: AggregatorFactoriesTests#testInvalidType().
Closes#58146.
Co-authored-by: bellengao <gbl_long@163.com>
It is possible for the source document to have an empty string value
for a field that is mapped as numeric. We should treat those as missing
values and avoid throwing an assertion error.
Backport of #58541
This changes the default value for the results field of inference
applied on models that are trained via a data frame analytics job.
Previously, the results field default was `predicted_value`. This
commit makes it the same as in the training job itself. The new
default field is `<dependent_variable>_prediction`. Apart from
making inference consistent with the training job the model came
from, it is helpful to preserve the dependent variable name
by default as it provides some context to the user that may
avoid confusion as to which model results came from.
Backport of #58538
* Add acm mapping to APM for beats
* Add root mapping for APM
* Add sourcemap mapping to APM
* Fix missing properties
* Fix a second missing properties
* Add request property to acm
* Remove root and sourcemap per review
Co-authored-by: Mike Place <mike.place@elastic.co>
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Add the ability to get a custom value while specifying a default and use it throughout the
codebase to get rid of the `null` edge case and shorten the code a little.
Introduces a new method on `MappedFieldType` to return a family type name which defaults to the field type.
Changes `wildcard` and `constant_keyword` field types to return `keyword` for field capabilities.
Relates to #53175
Similarities only apply to a few text-based field types, but are currently set directly on
the base MappedFieldType class. This commit moves similarity information into
TextSearchInfo, and removes any mentions of it from MappedFieldType or FieldMapper.
It was previously possible to include a similarity parameter on a number of field types
that would then ignore this information. To make it obvious that this has no effect, setting
this parameter on non-text field types now issues a deprecation warning.
This change allows the submit async search task to cancel children
and removes the manual indirection that cancels the search task when the submit
task is cancelled. This is now handled by the task cancellation, which can cancel
grand-children since #54757.
This commits allows data streams to be a valid source for analytics and transforms.
Data streams are fairly transparent and our `_search` and `_reindex` actions work without error.
For `_transforms` the check-pointing works as desired as well. Data streams are effectively treated as an `alias` and the backing index values are stored within checkpointing information.
GET inference stats now reads from the .ml-stats index.
Our tests should wait for yellow state before attempting to query the index for stat information.
Unlike `classification`, which is using a cross validation splitter
that produces training sets whose size is predictable and equal to
`training_percent * class_cardinality`, for regression we have been
using a random splitter that takes an independent decision for each
document. This means we cannot predict the exact size of the training
set. This poses a problem as we move towards performing test inference
on the java side as we need to be able to provide an accurate upper
bound of the training set size to the c++ process.
This commit replaces the random splitter we use for regression with
the same streaming-reservoir approach we do for `classification`.
Backport of #58331
Improve the usability of the MS-SQL server/ODBC escaped
date/time/timestamp literals, by allowing timezone/offset ids
in the parsed string, e.g.:
```
{ts '2000-01-01T11:11:11Z'}
```
Closes: #58262
(cherry picked from commit 0af1f2fef805324e802d97d2fd9b4660abb403f0)
There was a discrepancy in the implementation of flush
acknowledgements: most of the class was designed on the
basis that the "last finalized bucket time" could be null
but the wire serialization assumed that it was never
null. This works because, the C++ sends zero "last
finalized bucket time" when it is not known or not
relevant. But then the Java code will print that to
XContent as it is assuming null represents not known or
not relevant.
This change corrects the discrepancies. Internally within
the class null represents not known or not relevant, but
this is translated from/to 0 for communications from the
C++ and old nodes that have the bug.
Additionally I switched from Date to Instant for this
class and made the member variables final to modernise it
a bit.
Backport of #58413
Now that MappedFieldType no longer extends lucene's FieldType, we need to have a
way of getting the index information about a field necessary for building text queries,
building term vectors, highlighting, etc. This commit introduces a new TextSearchInfo
abstraction that holds this information, and a getTextSearchInfo() method to
MappedFieldType to make it available. Field types that do not support text search can
just return null here.
This allows us to remove the MapperService.getLuceneFieldType() shim method.
FieldTypeLookup maps field names to their MappedFieldTypes. In the past, due to
the presence of multiple mapping types within a single index, this had to be updated
in-place because a mapping update might only affect one type. However, now that
we only have a single type per index, we can completely rebuild the FieldTypeLookup
on each update, removing lots of concurrency worries.
Adds a new value to the "event" enum of ML annotations, namely
"categorization_status_change".
This will allow users to see when categorization was found to
be performing poorly. Once per-partition categorization is
available, it will allow users to see when categorization is
performing poorly for a specific partition.
It does not make sense to reuse the "model_change" event that
annotations already have, because categorizer state is separate
to model state ("model" state is really anomaly detector state),
and is not reverted by the revert model snapshot API.
Therefore annotations related to categorization need to be
treated differently to annotations related to anomaly detection.
Backporting #58096 to 7.x branch.
Relates to #53100
* use mapping source direcly instead of using mapper service to extract the relevant mapping details
* moved assertion to TimestampField class and added helper method for tests
* Improved logic that inserts timestamp field mapping into an mapping.
If the timestamp field path consisted out of object fields and
if the final mapping did not contain the parent field then an error
occurred, because the prior logic assumed that the object field existed.
When doing aliasing with the same name over non existing fields, the analyzer gets stuck in a loop trying to resolve the alias over and over leading to SO. This PR breaks the cycle by checking the relationship between the alias and the child it tries to replace as an alias should never replace its child.
Fix#57270Close#57417
Co-authored-by: Hailei <zhh5919@163.com>
(cherry picked from commit 46786ff2e1ed5951006ff4bdd2b6ac6a1ebcf17b)
* Add support for snapshot and restore to data streams (#57675)
This change adds support for including data streams in snapshots.
Names are provided in indices field (the same way as in other APIs), wildcards are supported.
If rename pattern is specified it renames both data streams and backing indices.
It also adds test to make sure SLM works correctly.
Closes#57127
Relates to #53100
* version fix
* compilation fix
* compilation fix
* remove unused changes
* compilation fix
* test fix
When a local model is constructed, the cache hit miss count is incremented.
When a user calls _stats, we will include the sum cache hit miss count across ALL nodes. This statistic is important to in comparing against the inference_count. If the cache hit miss count is near the inference_count it indicates that the cache is overburdened, or inappropriately configured.
This commit fixes an AOOBE in the handling of fatal
failures in _async_search. If the underlying cause is not found,
this change uses the root failure.
Closes#58311
Today when creating a follower index via the put follow API, or via an
auto-follow pattern, it is not possible to specify settings overrides
for the follower index. Instead, we copy all of the leader index
settings to the follower. Yet, there are cases where a user would want
some different settings on the follower index such as the number of
replicas, or allocation settings. This commit addresses this by allowing
the user to specify settings overrides when creating follower index via
manual put follower calls, or via auto-follow patterns. Note that not
all settings can be overrode (e.g., index.number_of_shards) so we also
have detection that prevents attempting to override settings that must
be equal between the leader and follow index. Note that we do not even
allow specifying such settings in the overrides, even if they are
specified to be equal between the leader and the follower
index. Instead, the must be implicitly copied from the leader index, not
explicitly set by the user.
Fixes a bug in TextFieldMapper serialization when index is false, and adds a
base-class test to ensure that all field mappers are tested against all variations
with defaults both included and excluded.
Fixes#58188
TIME_PARSE works correctly if both date and time parts are specified,
and a TIME object (that contains only time is returned).
Adjust docs and add a unit test that validates the behavior.
Follows: #55223
(cherry picked from commit 9d6b679a5da88f3c131b9bdba49aa92c6c272abe)
This is currently used to set the indexVersionCreated parameter on FieldMapper.
However, this parameter is only actually used by two implementations, and clutters
the API considerably. We should just remove it, and use it directly in the
implementations that require it.
Today the read/write locks used internally by CacheFile object are
wrapped into a ReleasableLock. This is not strictly required and also
prevents usage of the tryLock() methods which we would like to use
for early releasing of read operations (#58164).
This changes the actions that would attempt to make the managed index read only to
check if the managed index is the write index of a data stream before proceeding.
The updated actions are shrink, readonly, freeze and forcemerge.
(cherry picked from commit c906f631833fee8628f898917a8613a1f436c6b1)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
As part of the "ML in Spaces" project, access to the ML UI in
Kibana is migrating to being controlled by Kibana privileges.
The ML UI will check whether the logged-in user has permission
to do something ML-related using Kibana privileges, and if they
do will call the relevant ML Elasticsearch API using the Kibana
system user. In order for this to work the kibana_system role
needs to have administrative access to ML.
Backport of #58061
This commit bumps our JNA dependency from 4.5.1 to 5.5.0, so that we are
now on the latest maintained line, and pick up a large collection of bug
fixes that have accumulated.
The main improvement here is that the total expected
count of training rows in the test is calculated as the
sum of the training fraction times the cardinality of each
class (instead of the training fraction times the total doc count).
Also relaxes slightly the error bound on the uniformity test from 0.12
to 0.13.
Closes#54122
Backport of #58180
We don't allow converting a data stream's writeable index into a searchable
snapshot. We are currently preventing swapping a data stream's write index
with the restored index.
This adds another step that will not proceed with the searchable snapshot action
until the managed index is not the write index of a data stream anymore.
(cherry picked from commit ccd618ead7cf7f5a74b9fb34524d00024de1479a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
MappedFieldType is a combination of two concerns:
* an extension of lucene's FieldType, defining how a field should be indexed
* a set of query factory methods, defining how a field should be searched
We want to break these two concerns apart. This commit is a first step to doing this, breaking
the inheritance relationship between MappedFieldType and FieldType. MappedFieldType
instead has a series of boolean flags defining whether or not the field is searchable or
aggregatable, and FieldMapper has a separate FieldType passed to its constructor defining
how indexing should be done.
Relates to #56814
The leases issued by CCR keep one extra operation around on the leader shards. This is not
harmful to the leader cluster, but means that there's potentially one delete that can't be
cleaned up.
Today a mounted searchable snapshot defaults to having the same replica
configuration as the index that was snapshotted. This commit changes this
behaviour so that we default to zero replicas on these indices, but allow the
user to override this in the mount request.
Relates #50999
This commit adds an optional field, `description`, to all ingest processors
so that users can explain the purpose of the specific processor instance.
Closes#56000.
This need some reorg of BinaryDV field data classes to allow specialisation of scripted doc values.
Moved common logic to a new abstract base class and added a new subclass to return string-based representations to scripts.
Closes#58044
Allows the kibana user to collect data telemetry in a background
task by giving the kibana_system built-in role the view_index_metadata
and monitoring privileges over all indices (*).
Without this fix, users who try to use Metricbeat for Stack Monitoring today
see the following error repeatedly in their Metricbeat log. Due to this error
Metricbeat is unwilling to proceed further and, thus, no Stack Monitoring
data is indexed into the Elasticsearch cluster.
Co-authored-by: Albert Zaharovits <albert.zaharovits@elastic.co>
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
Previously we excluded requiring licenses for dependencies with the
group name org.elasticsearch under the assumption that these use the
top-level Elasticsearch license. This is not always correct, for
example, for the org.elasticsearch:jna dependency as this is merely a
wrapper around the upstream JNA project, and that is the license that we
should be including. A recent change modified this check from using the
group name to checking only if the dependency is a project
dependency. This exposed the use of JNA in SQL CLI to this check, but
the license for it was not added. This commit addresses this by adding
the license.
Relates #58015
This has `EnsembleInferenceModel` not parse feature_names from the XContent.
Instead, it will rely on `rewriteFeatureIndices` to be called ahead time.
Consequently, protections are made for a fail fast path if `rewriteFeatureIndices` has not been called before `infer`.
This type of result will store stats about how well categorization
is performing. When per-partition categorization is in use, separate
documents will be written for every partition so that it is possible
to see if categorization is working well for some partitions but not
others.
This PR is a minimal implementation to allow the C++ side changes to
be made. More Java side changes related to per-partition
categorization will be in followup PRs. However, even in the long
term I do not see a major benefit in introducing dedicated APIs for
querying categorizer stats. Like forecast request stats the
categorizer stats can be read directly from the job's results alias.
Backport of #57978
Adds support for reading in `model_size_info` objects.
These objects contain numeric values indicating the model definition size and complexity.
Additionally, these objects are not stored or serialized to any other node. They are to be used for calculating and storing model metadata. They are much smaller on heap than the true model definition and should help prevent the analytics process from using too much memory.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Now that annotations are part of the anomaly detection job results
the annotations index should be refreshed on flushing and closing
the job so that flush and close continue to fulfil their contracts
that immediately after returning all results the job generated up
to that point are searchable.
ModelLoadingService only caches models if they are referenced by an
ingest pipeline. For models used in search we want to always cache the
models and rely on TTL to evict them. Additionally when an ingest
pipeline is deleted the model it references should not be evicted if
it is used in search.
Search after is a better choice for the delete expired data iterators
where processing takes a long time as unlike scroll a context does not
have to be kept alive. Also changes the delete expired data endpoint to
404 if the job is unknown
Since we change the memory estimates for data frame analytics jobs from worst case to a realistic case, the strict less-than assertion in the test does not hold anymore. I replaced it with a less-or-equal-than assertion.
Backport or #57882
Adds assertions to Netty to make sure that its threads are not polluted by thread contexts (and
also that thread contexts are not leaked). Moves the ClusterApplierService to use the system
context (same as we do for MasterService), which allows to remove a hack from
TemplateUgradeService and makes it clearer that applying CS updates is fully executing under
system context.
When Joni, the regex engine that powers grok emits a warning it
does so by default to System.err. System.err logs are all bucketed
together in the server log at WARN level. When Joni emits a warning,
it can be extremely verbose, logging a message for each execution
again that pattern. For ingest node that means for every document
that is run that through Grok. Fortunately, Joni provides a call
back hook to push these warnings to a custom location.
This commit implements Joni's callback hook to push the Joni warning
to the Elasticsearch server logger (logger.org.elasticsearch.ingest.common.GrokProcessor)
at debug level. Generally these warning indicate a possible issue with
the regular expression and upon creation of the Grok processor will
do a "test run" of the expression and log the result (if any) at WARN
level. This WARN level log should only occur on pipeline creation which
is a much lower frequency then every document.
Additionally, the documentation is updated with instructions for how
to set the logger to debug level.
Allow a field inside the data to be used as a tie breaker for events
that have the same timestamp.
The field is optional by default.
If used, the tie-breaker always requires a non-null value since it is
used inside `search_after` which requires a non-null value.
Fix#56824
(cherry picked from commit e5719ecb474b32730d93afdbb6834a32b0b2df8b)
The shrink action creates a shrunken index with the target number of shards.
This makes the shrink action data stream aware. If the ILM managed index is
part of a data stream the shrink action will make sure to swap the original
managed index with the shrunken one as part of the data stream's backing
indices and then delete the original index.
(cherry picked from commit 99aeed6acf4ae7cbdd97a3bcfe54c5d37ab7a574)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This deprecates `Rounding#round` and `Rounding#nextRoundingValue` in
favor of calling
```
Rounding.Prepared prepared = rounding.prepare(min, max);
...
prepared.round(val)
```
because it is always going to be faster to prepare once. There
are going to be some cases where we won't know what to prepare *for*
and in those cases you can call `prepareForUnknown` and stil be faster
than calling the deprecated method over and over and over again.
Ultimately, this is important because it doesn't look like there is an
easy way to cache `Rounding.Prepared` or any of its precursors like
`LocalTimeOffset.Lookup`. Instead, we can just build it at most once per
request.
Relates to #56124
Adds assertions to Netty to make sure that its threads are not polluted by thread contexts (and
also that thread contexts are not leaked). Moves the ClusterApplierService to use the system
context (same as we do for MasterService), which allows to remove a hack from
TemplateUgradeService and makes it clearer that applying CS updates is fully executing under
system context.
* Convert to date/datetime the result of numeric aggregations (min, max)
in Painless scripts
(cherry picked from commit f1de99e2a6fbf3806c4f2b6b809738aa8faa2d75)
This adds new plugin level circuit breaker for the ML plugin.
`model_inference` is the circuit breaker qualified name.
Right now it simply adds to the breaker when the model is loaded (and possibly breaking) and removing from the breaker when the model is unloaded.
Before to determine if a field is meta-field, a static method of MapperService
isMetadataField was used. This method was using an outdated static list
of meta-fields.
This PR instead changes this method to the instance method that
is also aware of meta-fields in all registered plugins.
Related #38373, #41656Closes#24422
We want to validate the DataStreams on creation to make sure the future backing
indices would not clash with existing indices in the system (so we can
always rollover the data stream).
This changes the validation logic to allow for a DataStream to be created
with a backing index that has a prefix (eg. `shrink-foo-000001`) even if the
former backing index (`foo-000001`) exists in the system.
The new validation logic will look for potential index conflicts with indices
in the system that have the counter in the name greater than the data stream's
generation.
This ensures that the `DataStream`'s future rollovers are safe because for a
`DataStream` `foo` of generation 4, we will look for standalone indices in the
form of `foo-%06d` with the counter greater than 4 (ie. validation will fail if
`foo-000006` exists in the system), but will also allow replacing a
backing index with an index named by prefixing the backing index it replaces.
(cherry picked from commit 695b242d69f0dc017e732b63737625adb01fe595)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Deleting expired data can take a long time leading to timeouts if there
are many jobs. Often the problem is due to a few large jobs which
prevent the regular maintenance of the remaining jobs. This change adds
a job_id parameter to the delete expired data endpoint to help clean up
those problematic jobs.
This makes it easier to debug where such tasks come from in case they are returned from the get tasks API.
Also renamed the last occurrence of waitForCompletion to waitForCompletionTimeout in get async search request.
This PR adds the initial Java side changes to enable
use of the per-partition categorization functionality
added in elastic/ml-cpp#1293.
There will be a followup change to complete the work,
as there cannot be any end-to-end integration tests
until elastic/ml-cpp#1293 is merged, and also
elastic/ml-cpp#1293 does not implement some of the
more peripheral functionality, like stop_on_warn and
per-partition stats documents.
The changes so far cover REST APIs, results object
formats, HLRC and docs.
Backport of #57683
This is a major refactor of the underlying inference logic.
The main refactor is now we are separating the model configuration and
the inference interfaces.
This has the following benefits:
- we can store extra things with the model that are not
necessary for inference (i.e. treenode split information gain)
- we can optimize inference separate from model serialization and storage.
- The user is oblivious to the optimizations (other than seeing the benefits).
A major part of this commit is removing all inference related methods from the
trained model configurations (ensemble, tree, etc.) and moving them to a new class.
This new class satisfies a new interface that is ONLY for inference.
The optimizations applied currently are:
- feature maps are flattened once
- feature extraction only happens once at the highest level
(improves inference + feature importance through put)
- Only storing what we need for inference + feature importance on heap
#47711 and #47246 helped to validate that monitoring settings are
rejected at time of setting the monitoring settings. Else an invalid
monitoring setting can find it's way into the cluster state and result
in an exception thrown [1] on the cluster state application (there by
causing significant issues). Some additional monitoring settings have
been identified that can result in invalid cluster state that also
result in exceptions thrown on cluster state application.
All settings require a type of either http or local to be
applicable. When a setting is changed, the exporters are automatically
updated with the new settings. However, if the old or new settings lack
of a type setting an exception will be thrown (since exporters are
always of type 'http' or 'local'). Arguably we shouldn't blindly create
and destroy new exporters on each monitoring setting update, but the
lifecycle of the exporters is abit out the scope this PR is trying to
address.
This commit introduces a similar methodology to check for validity as
#47711 and #47246 but this time for ALL (including non-http) settings.
Monitoring settings are not useful unless there an exporter with a type
defined. The type is used as dependent setting, such that it must
exist to set the value. This ensures that when any monitoring settings
changes that they can only get added to cluster state if the type
exists. If the type exists (and the other validations pass) then the
exporters will get re-built and the cluster state remains valid.
Tests have been included to ensure that all dynamic monitoring settings
have the type as dependent settings.
[1]
org.elasticsearch.common.settings.SettingsException: missing exporter type for [found-user-defined] exporter
at org.elasticsearch.xpack.monitoring.exporter.Exporters.initExporters(Exporters.java:126) ~[?:?]
When we force delete a DF analytics job, we currently first force
stop it and then we proceed with deleting the job config.
This may result in logging errors if the job config is deleted
before it is retrieved while the job is starting.
Instead of force stopping the job, it would make more sense to
try to stop the job gracefully first. So we now try that out first.
If normal stop fails, then we resort to force stopping the job to
ensure we can go through with the delete.
In addition, this commit introduces `timeout` for the delete action
and makes use of it in the child requests.
Backport of #57680
rewrite config on update if either version is outdated, credentials change,
the update changes the config or deprecated settings are found. Deprecated
settings get migrated to the new format. The upgrade can be easily extended to
do any necessary re-writes.
fixes#56499
backport #57648
For a rolling/mixed cluster upgrade (add new version to existing cluster
then shutdown old instances), the watches that ship by default
with monitoring may not get properly updated to the new version.
Monitoring watches can only get published if the internal state is
marked as dirty. If a node is not master, will also get marked as
clean (e.g. not dirty).
For a mixed cluster upgrade, it is possible for the new node to be
added, not as master, the internal state gets marked as clean so
that no more attempts can be made to publish the watches. This
happens on all new nodes. Once the old nodes are de-commissioned
one of the new version nodes in the cluster gets promoted to master.
However, that new master node (with out intervention like restarting
the node or removing/adding exporters) will never attempt to re-publish
since the internal state was already marked as clean.
This commit adds a cluster state listener to mark the resource dirty
when a node is promoted to master. This will allow the new resource
to be published without any intervention.
In #55592 and #55416, we deprecated the settings for enabling and disabling
basic license features and turned those settings into no-ops. Since doing so,
we've had feedback that this change may not give users enough time to cleanly
switch from non-ILM index management tools to ILM. If two index managers
operate simultaneously, results could be strange and difficult to
reconstruct. We don't know of any cases where SLM will cause a problem, but we
are restoring that setting as well, to be on the safe side.
This PR is not a strict commit reversion. First, we are keeping the new
xpack.watcher.use_ilm_index_management setting, introduced when
xpack.ilm.enabled was made a no-op, so that users can begin migrating to using
it. Second, the SLM setting was modified in the same commit as a group of other
settings, so I have taken just the changes relating to SLM.
* Remove duplicate ssl setup in sql/qa projects
* Fix enforcement of task instances
* Use static data for cert generation
* Move ssl testing logic into a plugin
* Document test cert creation
This PR replaces the marker interface with the method
FieldMapper#parsesArrayValue. I find this cleaner and it will help with the
fields retrieval work (#55363).
The refactor also ensures that only field mappers can declare they parse array
values. Previously other types like ObjectMapper could implement the marker
interface and be passed array values, which doesn't make sense.
Add `TRIM` function which combines the functionality of both
`LTRIM` and `RTRIM` by stripping both leading and trailing
whitespaces.
Refers to #41195
(cherry picked from commit 6c86c919e12f0c4cb5e39d129aa65ab3e274268f)
We test expected TLS failures by catching SSLException, but other
security providers ( i.e. BCFIPS ) might throw a different one. In
this case, BCFIPS throws org.bouncycastle.tls.TlsFatalAlert
* Move classes from build scripts to buildSrc
- move Run task
- move duplicate SanEvaluator
* Remove :run workaround
* Some little cleanup on build scripts on the way
As the datastream information is stored in the `ClusterState.Metadata` we exposed
the `Metadata` to the `AsyncWaitStep#evaluateCondition` method in order for
the steps to be able to identify when a managed index is part of a DataStream.
If a managed index is part of a DataStream the rollover target is the DataStream
name and the highest generation index is the write index (ie. the rolled index).
(cherry picked from commit 6b410dfb78f3676fce1b7401f1628c1ca6fbd45a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Some BI tools (i.e. Tableau) would try to cast strings where the time
part is separated from the date part with a whitespace instead of `T`.
Adjust type conversion used by CAST to support this.
(cherry picked from commit 0e18321e7ad9f779c42855efbf93f171b9128a5e)
Add basic support for `TOP X` as a synonym to LIMIT X which is used
by [MS-SQL server](https://docs.microsoft.com/en-us/sql/t-sql/queries/top-transact-sql?view=sql-server-ver15),
e.g.:
```
SELECT TOP 5 a, b, c FROM test
```
TOP in SQL server also supports the `PERCENTAGE` and `WITH TIES`
keywords which this implementation doesn't.
Don't allow usage of both TOP and LIMIT in the same query.
Refers to #41195
(cherry picked from commit 2f5ab81b9ad884434d1faa60f4391f966ede73e8)
At some point, we changed the supported-type test to also catch
assertion errors. This has the side effect of also catching the
`fail()` call inside the try-catch, which silently smothered some
failures.
This modifies the test to throw at the end of the try-catch
block to prevent from accidentally catching itself.
Catching the AssertionError is convenient because there are other locations
that do throw an assertion in tests (due to hitting an assertion
before the exception is thrown) so I think we should keep it around.
Also includes a variety of fixes to other tests which were failing
but being silently smothered.
* [ML] mark forecasts for force closed/failed jobs as failed (#57143)
forecasts that are still running should be marked as failed/finished in the following scenarios:
- Job is force closed
- Job is re-assigned to another node.
Forecasts are not "resilient". Their execution does not continue after a node failure. Consequently, forecasts marked as STARTED or SCHEDULED should be flagged as failed. These forecasts can then be deleted.
Additionally, force closing a job kills the native task directly. This means that if a forecast was running, it is not allowed to complete and could still have the status of `STARTED` in the index.
relates to https://github.com/elastic/elasticsearch/issues/56419
* [ML] adds new for_export flag to GET _ml/inference API (#57351)
Adds a new boolean flag, `for_export` to the `GET _ml/inference/<model_id>` API.
This flag is useful for moving models between clusters.
* Add new circuitbreaker plugin and refactor CircuitBreakerService (#55695)
This commit lays the ground work for plugins supplying their own circuit breakers.
It adds a new interface: `CircuitBreakerPlugin`.
This interface provides methods for providing custom child CircuitBreaker objects. There are also facilities for allowing dynamic settings for the custom breakers.
With the refactor, circuit breakers are no longer replaced on setting changes. Instead, the two mutable settings themselves are `volatile`. Plugins that want to use their custom circuit breaker should keep a reference of their constructed breaker.
This adds a max_model_memory setting to forecast requests.
This setting can take a string value that is formatted according to byte sizes (i.e. "50mb", "150mb").
The default value is `20mb`.
There is a HARD limit at `500mb` which will throw an error if used.
If the limit is larger than 40% the anomaly job's configured model limit, the forecast limit is reduced to be strictly lower than that value. This reduction is logged and audited.
related native change: https://github.com/elastic/ml-cpp/pull/1238
closes: https://github.com/elastic/elasticsearch/issues/56420
Implement TIME_PARSE(<time_str>, <pattern_str>) function
which allows to parse a time string according to the specified
pattern into a time object. The patterns allowed are those of
java.time.format.DateTimeFormatter.
Closes#54963
Co-authored-by: Andrei Stefan <astefan@users.noreply.github.com>
Co-authored-by: Patrick Jiang(白泽) <patrickjiang0530@gmail.com>
(cherry picked from commit 1fe1188d449cad7d0782a202372edc52a4014135)
Backport of #56878 to 7.x branch.
With this change the following APIs will be able to resolve data streams:
get index, get mappings and ilm explain APIs.
Relates to #53100
Allows geo fields (`geo_point`, `geo_shape`) to have missing values.
Fixes a bug where such missing values would result in an error.
Closes#57299
Backport of #57300
Backporting #56888 to 7.x branch.
Limit the creation of data streams only for namespaces that have a composable template with a data stream definition.
This way we ensure that mappings/settings have been specified and will be used at data stream creation and data stream rollover.
Also remove `timestamp_field` parameter from create data stream request and
let the create data stream api resolve the timestamp field
from the data stream definition snippet inside a composable template.
Relates to #53100
Previously, `CASE` and `IIF` when translated to painless scripts
(used in GROUP BY, HAVING, WHERE) a custom `caseFunction`
registered in the `InternalSqlScriptUtils` was used. This function
received and array of arbitrary length:
```[condition1, result1, condition2, result2, ... elseResult]```
Painless doesn't know of the context and therefore is evaluating
all conditions and results before invoking the `caseFunction` on them.
As a consequence, erroneous result expressions (i.e. division by 0)
where always evaluated despite of the guarding condition.
Replace the `caseFunction` with painless `<cond> ? <res1> : <res2>`
expressions to properly guard the result expressions and only evaluate
the one for which its guarding condition evaluates to true (or of course
the elseResult).
As a bonus, this approach includes performance benefits since we avoid
unnecessary evaluations of both conditions and result expressions.
Fixes: #49672
(cherry picked from commit 9584b345d89f797bfb658212b928b9812804f02f)
The ssl.trust setting for Watcher provides a list of hostnames that
should be automatically trusted for SSL hostname verification. It was
accidentally broken when we added the full ssl.* settings for email
notifications (see #45272)
This commit corrects this, so the setting is once again respected,
as long as none of the other ssl settings are configured for email
notifications.
Resolves: #52153
Backport of: #56090
This commit removes the compiler.java setting from the build. It was
originally added when Gradle was far behind support for the latest jdk,
but is no longer applicable as we don't have any need to update the
supported compile version before gradle supports the newer version. Note
that the runtime version changing support still exists here, this only
ensures we use the same jdk to compile as we use to run gradle.
Since #51888 the ML job stats endpoint has returned entries for
jobs that have a persistent task but not job config. Such
orphaned tasks caused monitoring to fail.
This change ignores any such corrupt jobs for monitoring purposes.
Backport of #57235
This PR removes the blocking call to insert ingest documents into a queue in the
coordinator. It replaces it with an offer call which will throw a rejection exception
in the event that the queue is full. This prevents deadlocks of the write threads
when the queue fills to capacity and there are more than one enrich processors
in a pipeline.
The searcher was randomly wrapping its reader as slow, parallel, or filtered.
This was causing casting issues in the normalizer tests. By removing the
wrapping, the problem goes away.
Closes#57164
If a job is NOT opened, forecasts should be able to be deleted, no matter their state.
This also fixes a bug with expanding forecast IDs. We should check for wildcard `*` and `_all` when expanding the ids
closes https://github.com/elastic/elasticsearch/issues/56419
Change the error message wording for comparisons against fields in
filtering (s/variables/fields).
(cherry picked from commit d9a1cb50940d0a98fd75b9c0123ca6e1d862f65d)
* Update the JLine dependency to 3.14.1
Update the JLine dependency from 3.10.0 to 3.14.1.
(cherry picked from commit c2d9b74046fa5ddb54604da3afa7887cc38548a1)
Backport of #55548
Adds equivalence for keyword field to the wildcard field. Regex, fuzzy, wildcard and prefix queries are all supported.
All queries use an approximation query backed by an automaton-based verification queries.
Closes#54275
Fix delete_expired_data/nightly maintenance when
many model snapshots need deleting (#57041)
The queries performed by the expired data removers pull back entire
documents when only a few fields are required. For ModelSnapshots in
particular this is a problem as they contain quantiles which may be
100s of KB and the search size is set to 10,000.
This change makes the search more efficient by only requesting the
fields needed to work out which expired data should be deleted.
In #51089 where SamlAuthenticatorTests were refactored, we missed
to update one test case which meant that a single key would be
used both for signing and encryption in the same run. As explained
in #51089, and due to FIPS 140 requirements, BouncyCastle FIPS
provider will block RSA keys that have been used for signing from
being used for encryption and vice versa
This commit changes testNoAttributesReturnedWhenTheyCannotBeDecrypted
to always use the specific keys we have added for encryption.
This change ensures that we stop the maintenance service on all nodes
when a data node is restarted. This ensures that we don't send
update_by_query requests on the node that is restarted.
This commit also raises the log level to trace for some packages
in order to investigate the failures to acquire a shard lock
after a restart.
Relates #56765
Przemysław Witek
Yannick Welsch
David Turner
David Kyle
Dario Gieselaar
Yang Wang
Lee Hinman
Dan Hermann
Benjamin Trent
Martijn van Groningen
Julie Tibshirani
David Roberts
Rene Groeschke
Przemyslaw Gomulka
Andrei Stefan
Tanguy Leroux
Tim Vernum
Costin Leau
Igor Motov
Dimitris Athanasiou
James Baiera
Henning Andersen
Jason Tedor
Nik Everett
Chris Roberson
Armin Braun
Luca Cavanna
markharwood
Alan Woodward
Jim Ferenczi
Marios Trivyzas
Mark Tozzi
Przemko Robakowski
Stuart Tettemer
Andrei Dan
Ignacio Vera
Tal Levy
Alejandro Fernández Haro
Shaunak Kashyap
Albert Zaharovits
Valeriy Khakhutskyy
Aleksandr Maus
Hendrik Muhs
Jake Landis
Mayya Sharipova
William Brafford
Ioannis Kakavas
William Brafford
Mark Vieira
Zachary Tong
Ryan Ernst
Ryan Ernst
Bogdan Pintea