Today if the primary discovers that an indexing request needs a mapping update
then it will send it to the master for validation and processing. If, however,
the put-mapping request is invalid then the master still processes it as a
(no-op) cluster state update. When there are a large number of indexing
operations that result in invalid mapping updates this can overwhelm the
master.
However, the primary already has a reasonably up-to-date mapping against which
it can check the (approximate) validity of the put-mapping request before
sending it to the master. For instance it is not possible to remove fields in a
mapping update, so if the primary detects that a mapping update will exceed the
fields limit then it can reject it itself and avoid bothering the master.
This commit adds a pre-flight check to the mapping update path so that the
primary can discard obviously-invalid put-mapping requests itself.
Fixes#35564
Backport of #48817
This test failure manifests the limitation of the recovery source merge
policy explained in #41628. If we already merge down to a single segment
then subsequent force merges will be noop although they can prune
recovery source. We need to adjust this test until we have a fix for the
merge policy.
Relates #41628Closes#48735
The loading of `RepositoryData` is not an atomic operation.
It uses a list + get combination of calls.
This lead to accidentally returning an empty repository data
for generations >=0 which can never not exist unless the repository
is corrupted.
In the test #48122 (and other SLM tests) there was a low chance of
running into this concurrent modification scenario and the repository
actually moving two index generations between listing out the
index-N and loading the latest version of it. Since we only keep
two index-N around at a time this lead to unexpectedly absent
snapshots in status APIs.
Fixing the behavior to be more resilient is non-trivial but in the works.
For now I think we should simply throw in this scenario. This will also
help prevent corruption in the unlikely event but possible of running into this
issue in a snapshot create or delete operation on master failover on a
repository like S3 which doesn't have the "no overwrites" protection on
writing a new index-N.
Fixes#48122
The problem with wrapping here is that it converts any exception into an
IAE, which we treat as a client error (400 status) whereas the exception
being wrapped here could be a server error (e.g., NPE). This commit
stops wrapping all ingest processor exceptions as IAEs.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
* Add ingest info to Cluster Stats (#48485)
This commit enhances the ClusterStatsNodes response to include global
processor usage stats on a per-processor basis.
example output:
```
...
"processor_stats": {
"gsub": {
"count": 0,
"failed": 0
"current": 0
"time_in_millis": 0
},
"script": {
"count": 0,
"failed": 0
"current": 0,
"time_in_millis": 0
}
}
...
```
The purpose for this enhancement is to make it easier to collect stats on how specific processors are being used across the cluster beyond the current per-node usage statistics that currently exist in node stats.
Closes#46146.
* fix BWC of ingest stats
The introduction of processor types into IngestStats had a bug.
It was set to `null` and set as the key to the map. This would
throw a NPE. This commit resolves this by setting all the processor
types from previous versions that are not serializing it out to
`_NOT_AVAILABLE`.
Previous behavior while copying HTTP headers to the ThreadContext,
would allow multiple HTTP headers with the same name, handling only
the first occurrence and disregarding the rest of the values. This
can be confusing when dealing with multiple Headers as it is not
obvious which value is read and which ones are silently dropped.
According to RFC-7230, a client must not send multiple header fields
with the same field name in a HTTP message, unless the entire field
value for this header is defined as a comma separated list or this
specific header is a well-known exception.
This commits changes the behavior in order to be more compliant to
the aforementioned RFC by requiring the classes that implement
ActionPlugin to declare if a header can be multi-valued or not when
registering this header to be copied over to the ThreadContext in
ActionPlugin#getRestHeaders.
If the header is allowed to be multivalued, then all such headers
are read from the HTTP request and their values get concatenated in
a comma-separated string.
If the header is not allowed to be multivalued, and the HTTP
request contains multiple such Headers with different values, the
request is rejected with a 400 status.
Today a couple of allocation deciders iterate through all the shards on a node
to find the `INITIALIZING` or `RELOCATING` ones, and this can slow down cluster
state updates in clusters with very high-density nodes holding many thousands
of shards even if those shards belong to closed or frozen indices. This commit
pre-computes the sets of `INITIALIZING` and `RELOCATING` shards to speed up
this search.
Closes#46941
Relates #48579
Co-authored-by: "hongju.xhj" <hongju.xhj@alibaba-inc.com>
Backport of #48553. Make a number of changes so that JSON in the server
directory is more resilient to automatic formatting. This covers:
* Reformatting multiline JSON to embed whitespace in the strings
* Add helper method `stripWhitespace()`, to strip whitespace from a JSON
document using XContent methods. This is sometimes necessary where
a test is comparing some machine-generated JSON with an expected
value.
Today it is possible that we import a dangling index that was created in a
newer version than one or more of the nodes in the cluster. Such an index would
prevent the older node(s) from rejoining the cluster if they were to briefly
leave it for some reason. This commit prevents the import of such dangling
indices.
Fixes#34264
With this change, we won't warm up searchers until we externally refresh
an engine. We explicitly refresh before allowing reading from a shard
(i.e., move to post_recovery state) and during resetting. These
guarantees that we have warmed up the engine before exposing the
external searcher.
Another prerequisite for #47186.
Fixes the shard snapshot status reporting for failed shards
in the corner case of failing the shard because of an exception
thrown in `SnapshotShardsService` and not the repository.
We were missing the update on the `snapshotStatus` instance in
this case which made the transport APIs using this field report
back an incorrect status.
Fixed by moving the failure handling to the `SnapshotShardsService`
for all cases (which also simplifies the code, the ex. wrapping in
the repository was pointless as we only used the ex. trace upstream
anyway).
Also, added an assertion to another test that explicitly checks this
failure situation (ex. in the `SnapshotShardsService`) already.
Closes#48526
We can run into an already closed store here and hence
throw on trying to increment the ref count => moving to
the guarded ref count increment
closes#48625
Previously the functions accepted a doc values reference, whereas they now
accept the name of the vector field. Here's an example of how a vector function
was called before and after the change.
```
Before: cosineSimilarity(params.query_vector, doc['field'])
After: cosineSimilarity(params.query_vector, 'field')
```
This seems more intuitive, since we don't allow direct access to vector doc
values and the the meaning of `doc['field']` is unclear.
The PR makes the following changes (broken into distinct commits):
* Add new function signatures of the form `function(params.query_vector,
'field')` and deprecates the old ones. Because Painless doesn't allow two
methods with the same name and number of arguments, we allow a generic `Object`
to be passed in to the function and decide on the behavior through an
`instanceof` check.
* Refactor the class bindings so that the document field is passed to the
constructor instead of the instance method. This allows us to avoid retrieving
the vector doc values on every function invocation, which gives a tiny speed-up
in benchmarks.
Note that this PR adds new signatures for the sparse vector functions too, even
though sparse vectors are deprecated. It seemed simplest to understand (for both
us and users) to keep everything symmetric between dense and sparse vectors.
Today we won't advance the safe commit on a new global checkpoint unless
the last commit can become safe. This is not great if we have more than
two commits as we can have a new safe commit earlier.
Closes#4853
This commit fixes intermittent failures in ShuffleForcedMergePolicyTests#testDiagnostics
by setting a more restricted merge policy that ensures that extra merging will not happen
before the forced merge.
This commit fixes the expectations of SearchAfterIT#shouldFail regarding the inner exceptions that should be thrown
when testing failures. The exception is sometimes wrapped in a QueryShardException so this change only checks that
the toString representation contains the expected message.
Closes#43143
This change adds a new merge policy that interleaves eldest and newest segments picked by MergePolicy#findForcedMerges
and MergePolicy#findForcedDeletesMerges. This allows time-based indices, that usually have the eldest documents
first, to be efficient at finding the most recent documents too. Although we wrap this merge policy for all indices
even though it is mostly useful for time-based but there should be no overhead for other type of indices so it's simpler
than adding a setting to enable it. This change is needed in order to ensure that the optimizations that we are working
on in # remain efficient even after running a force merge.
Relates #37043
Today, we hold the engine readLock while refreshing. Although this
choice simplifies the correctness reasoning, it can block IndexShard
from closing if warming an external reader takes time. The current
implementation of refresh does not need to hold readLock as
ReferenceManager can handle errors correctly if the engine is closed in
midway.
This PR is a prerequisite that we need to solve #47186.
* Extract remote "sniffing" to connection strategy (#47253)
Currently the connection strategy used by the remote cluster service is
implemented as a multi-step sniffing process in the
RemoteClusterConnection. We intend to introduce a new connection strategy
that will operate in a different manner. This commit extracts the
sniffing logic to a dedicated strategy class. Additionally, it implements
dedicated tests for this class.
Additionally, in previous commits we moved away from a world where the
remote cluster connection was mutable. Instead, when setting updates are
made, the connection is torn down and rebuilt. We still had methods and
tests hanging around for the mutable behavior. This commit removes those.
* Introduce simple remote connection strategy (#47480)
This commit introduces a simple remote connection strategy which will
open remote connections to a configurable list of user supplied
addresses. These addresses can be remote Elasticsearch nodes or
intermediate proxies. We will perform normal clustername and version
validation, but otherwise rely on the remote cluster to route requests
to the appropriate remote node.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
* Fix .tasks index strict mapping: parent_id should be parent_task_id
The .tasks index has mappings that's strictly defined. `parent_task_id`
was defined as `parent_id` though which would cause an exception in case
a task is persisted that has a parent task id set.
While at it, a couple of compiler warnings were addressed and a test
request builder was removed in favour of using its corresponding request.
* increment version
The expand phase is always created providing a function that builds
the next phase to be run, which has a single purpose: sending the
response back. Such small search phase is not necessary and causes some
issues when reporting search progress and counting the search phases
that need to be executed and that are already executed. We can simply
rather send back the response, without creating a specific phase for that.
This relates to the effort towards #46250. We added
tracking of the shard generation for successful
snapshots to `8.0`.
This assertion isn't correct though. While an `8.0`
master won't create an entry with sucess state and
a null shard generation it may still (on e.g. master
failover) send a success entry created by a 7.x master
with a `null` generation over the wire.
Closes#47406
This changes the queries equals() method so that the boost factors for each term
are considered for the equality calculation. This means queries are only equal
if both their terms and associated boosts match. The ordering of the terms
doesn't matter as before, which is why we internally need to sort the terms and
boost for comparison on the first equals() call like before. Boosts that are
`null` are considered equal to boosts of 1.0f because topLevelQuery() will only
wrap into BoostQuery if boost is not null and different from 1f.
Closes#48184
BytesReference is currently an abstract class which is extended by
various implementations. This makes it very difficult to use the
delegation pattern. The implication of this is that our releasable
BytesReference is a PagedBytesReference type and cannot be used as a
generic releasable bytes reference that delegates to any reference type.
This commit makes BytesReference an interface and introduces an
AbstractBytesReference for common functionality.
On data-only nodes we were not using the last persisted cluster state as base point to compute
what needed storage, but the last applied cluster state (but not necessarily properly persisted)
instead.
In #48392 we added a second computation of the sizes of the relocating shards
in `canRemain()` but passed the wrong value for `subtractLeavingShards`. This
fixes that. It also removes some unnecessary logging in a test case added in
the same commit.
This is a follow up of https://github.com/elastic/elasticsearch/issues/43453 where we added
a system property to disallow allocation awareness in search requests. Since search requests
will no longer check the allocation awareness attributes for routing in the next major version,
this change adds a deprecation warning on any setup that uses these attributes.
Relates #43453
Previously there was a bug when an query inside script_score query
was rewritten. If min_score was not set and was equal to null,
we were converting it to float value which resulted to NPE.
This commit corrects this.
Closes#48081
Brings handling of out of bounds points in linestrings in line with
points. Now points with latitude above 90 and below -90 are handled
the same way as for points by adjusting the longitude by moving it by
180 degrees.
Relates to #43916
* Do not throw errors on unknown types in SearchAfterBuilder
The support for BigInteger and BigDecimal was added for XContent in
https://github.com/elastic/elasticsearch/pull/32888. However the SearchAfterBuilder
xcontent parser doesn't expect them to be present so it throws an AssertionError.
This change fixes this discrepancy by changing the AssertionError into an
IllegalArgumentException that will not cause the node to die when thrown.
Closes#48074
Today it is possible that the total size of all relocating shards exceeds the
total amount of free disk space. For instance, this may be caused by another
user of the same disk increasing their disk usage, or may be due to how
Elasticsearch double-counts relocations that are nearly complete particularly
if there are many concurrent relocations in progress.
The `DiskThresholdDecider` treats negative free space similarly to zero free
space, but it then fails when rendering the messages that explain its decision.
This commit fixes its handling of negative free space.
Fixes#48380
The comment says it needs random-access, but it passes `Long#MAX_VALUE` as the
lead cost, which forces sequential access, it should pass `0` instead. I took
advantage of this fix to improve the logic to leverage an estimation of the
number of times that `Bits#get` gets called to make better decisions.
Adrien Grand
David Turner
Nhat Nguyen
Armin Braun
Jason Tedor
Mark Vieira
Tal Levy
Ioannis Kakavas
Zachary Tong
Alexander Reelsen
Stéphane Campinas
kkewwei
Rory Hunter
Arvind Ramachandran
Yannick Welsch
Ignacio Vera
Julie Tibshirani
Stuart Tettemer
Jim Ferenczi
Dan Hermann
Tim Brooks
Luca Cavanna
Christoph Büscher
Mayya Sharipova
Igor Motov
Tom Callahan