Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
This commit moves the config that stores Cors options into the server
package. Currently both nio and netty modules must have a copy of this
config. Moving it into server allows one copy and the tests to be in a
common location.
Registering a channel with a selector is a required operation for the
channel to be handled properly. Currently, we mix the registeration with
other setup operations (ip filtering, SSL initiation, etc). However, a
fail to register is fatal. This PR modifies how registeration occurs to
immediately close the channel if it fails.
There are still two clear loopholes for how a user can interact with a
channel even if registration fails. 1. through the exception handler.
2. through the channel accepted callback. These can perhaps be improved
in the future. For now, this PR prevents writes from proceeding if the
channel is not registered.
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
Due to recent changes are done for converting `repository-hdfs` to test
clusters (#41252), the `integTestSecure*` tasks did not depend on
`secureHdfsFixture` which when running would fail as the fixture
would not be available. This commit adds the dependency of the fixture
to the task.
The `secureHdfsFixture` is a `AntFixture` which is spawned a process.
Internally it waits for 30 seconds for the resources to be made available.
For my local machine, it took almost 45 seconds to be available so I have
added the wait time as an input to the `AntFixture` defaults to 30 seconds
and set it to 60 seconds in case of secure hdfs fixture.
The integ test for secure hdfs was disabled for a long time and so
the changes done in #42090 to fix the tests are also done in this commit.
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
* Provide an Option to Use Path-Style-Access with S3 Repo
* As discussed, added the option to use path style access back again and
deprecated it.
* Defaulted to `false`
* Added warning to docs
* Closes#41816
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
This change adds the ability to attach annotative information for
classes, methods, fields, static methods, class bindings, and
instance bindings during Painless whitelisting.
Annotations are specified as @annotation or optionally as
@annotation[parameter="argument",...].
Annotations open up the ability to specify whitelist objects as
having a short name (no_import -> @no_import) or deprecated.
Currently nio implements ip filtering at the channel context level. This
is kind of a hack as the application logic should be implemented at the
handler level. This commit moves the ip filtering into a channel
handler. This requires adding an indicator to the channel handler to
show when a channel should be closed.
* This check is redundant, if the container doesn't exist subsequent operations will fail anyway. Since we are not running this exists check during verification I don't think there's much point to having it in snapshot initialization.
* This PR is mainly motivated by the fact that this forces more permissions to be available in shared environments
* Upgrade to latest GCS SDK and transitive dependencies (I chose the later version here on conflict)
* Remove now unnecessary hack for custom endpoints (the linked bugs were both resolved in the SDK)
* Use `internalCluster().close()` to force all nodes (and not just the datanodes) to shut down even if one fails to shut down in time
* Force closing httpServer to get cleaner logs if nodes still hang on shut down
* Relates #43048
* introduce state to the REST API specification
* change state over to stability
* CCR is no GA updated to stable
* SQL is now GA so marked as stable
* Introduce `internal` as state for API's, marks stable in terms of lifetime but unstable in terms of guarantees on its output format since it exposes internal representations
* make setting a wrong stability value, or not setting it at all an error that causes the YAML test suite to fail
* update spec files to be explicit about their stability state
* Document the fact that stability needs to be defined
Otherwise the YAML test runner will fail (with a nice exception message)
* address check style violations
* update rest spec unit tests to include stability
* found one more test spec file not declaring stability, made sure stability appears after documentation everywhere
* cluster.state is stable, mark response in some way to denote its a key value format that can be changed during minors
* mark data frame API's as beta
* remove internal and private as states for an API
* removed the wrong enum values in the Stability Enum in the previous commit
(cherry picked from commit 61c34bbd92f8f7e5f22fa411c6b682b0ebd8a99d)
Infra has fixed#10462 by installing `haveged` on CI workers.
This commit enables the disabled fixture and tests, and mounts
`/dev/urandom` for the container so there is enough
entropy required for kdc.
Note: hdfs-repository tests have been disabled, will raise a separate issue for it.
Closes#40624Closes#40678
We are still using `FileSwitchDirectory` in the case a user configures file based pre-load of mmaps. This is trappy for multiple reasons if the both directories used by `FileSwitchDirectory` point to the same filesystem directory. One issue is LUCENE-8835 that cause issues like #37111 - unless LUCENE-8835 isn't fixed we should not use it in elasticsearch. Instead we use a similar trick as we use for HybridFS and subclass mmap directory directly.
Currently suggesters return null values on empty shards. Usually this gets replaced
by results from other non-epmty shards, but if the index is completely epmty (e.g. after
creation) the search responses "suggest" is also "null" and we don't render a corresponding
output in the REST response. This is an irritating edge case that requires special handling on
the user side (see #42473) and should be fixed.
This change makes sure every suggester type (completion, terms, phrase) returns at least an
empty skeleton suggestion output, even for empty shards. This way, even if we don't find
any suggestions anywhere, we still return and output the empty suggestion.
Closes#42473
Fixes an issue where repositories are unintentionally shared among tests (given that the repo contents is captured in a static variable on the test class, to allow "sharing" among nodes) and two tests randomly chose the same snapshot name, leading to a conflict.
Closes#42519
We initially added `requireDocker` for a way for tasks to say that they
absolutely must have it, like the build docker image tasks.
Projects using the test fixtures plugin are not in this both, as the
intent with these is that they will be skipped if docker and docker-compose
is not available.
Before this change we were lenient, the docker image build would succeed
but produce nothing. The implementation was also confusing as it was not
immediately obvious this was the case due to all the indirection in the
code.
The reason we have this leniency is that when we added the docker image
build, docker was a fairly new requirement for us, and we didn't have
it deployed in CI widely enough nor had CI configured to prefer workers
with docker when possible. We are in a much better position now.
The other reason was other stack teams running `./gradlew assemble`
in their respective CI and the possibility of breaking them if docker is
not installed. We have been advocating for building specific distros for
some time now and I will also send out an additional notice
The PR also removes the use of `requireDocker` from tests that actually
use test fixtures and are ok without it, and fixes a bug in test
fixtures that would cause incorrect configuration and allow some tasks
to run when docker was not available and they shouldn't have.
Closes #42680 and #42829 see also #42719
This commit fixes the version parsing in various tests. The issue here is that
the parsing was relying on java.version. However, java.version can contain
additional characters such as -ea for early access builds. See JEP 233:
Name Syntax
------------------------------ --------------
java.version $VNUM(\-$PRE)?
java.runtime.version $VSTR
java.vm.version $VSTR
java.specification.version $VNUM
java.vm.specification.version $VNUM
Instead, we want java.specification.version.
Adding an example of how to re-implement the polish stempel analyzer
in case a user want to modify or extend it. In order for the analyzer to be
able to use polish stopwords, also registering a polish_stop filter for the
stempel plugin.
Closes#13150
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
* Cleanup Bulk Delete Exception Logging
* Follow up to #41368
* Collect all failed blob deletes and add them to the exception message
* Remove logging of blob name list from caller exception logging
* Add Infrastructure to Run 3rd Party Repository Tests
* Add infrastructure to run third party repository tests using our standard JUnit infrastructure
* This is a prerequisite of #42189
* Remove Delete Method from BlobStore (#41619)
* The delete method on the blob store was used almost nowhere and just duplicates the delete method on the blob containers
* The fact that it provided for some recursive delete logic (that did not behave the same way on all implementations) was not used and not properly tested either
Both of these classes are basically a bloated wrapper around a simple
construct that can simply be a DirectoryFactory interface. This change
removes both classes and replaces them with a simple stateless interface
that creates a new `Directory` per shard. The concept of `index.store` is preserved
since it makes sense from a configuration perspective.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
We have a number of places in analysis-handling code where we check
if a field type is a keyword field, and if so then extract the normalizer rather
than pulling the index-time analyzer. However, a keyword normalizer is
really just a special case of an analyzer, so we should be able to simplify this
by setting the normalizer as the index-time analyzer at construction time.
testclusters detect from settings that security is enabled
if a user is not specified using the DSL introduced in this PR, a default one is created
the appropriate wait conditions are used authenticating with the first user defined in the DSL ( or the default user ).
an example DSL to create a user is user username:"test_user" password:"x-pack-test-password" role: "superuser" all keys are optional and default to the values shown in this example
Upgrades the AWS SDK to the same version that we're using for the repository-s3 plugin, providing
testing capabilities to override certain SDK endpoints in order to point them to localhost for testing.
Adds tests for the various credential providers.
Today Elasticsearch accepts, but silently ignores, port ranges in the
`discovery.seed_hosts` setting:
```
discovery.seed_hosts: 10.1.2.3:9300-9400
```
Silently ignoring part of a setting like this is trappy. With this change we
reject seed host addresses of this form.
Closes#40786
Backport of #41404
This is related to #27260. Currently we have a single read buffer that
is no larger than a single TLS packet. This prevents us from reading
multiple TLS packets in a single socket read call. This commit modifies
our TLS work to support reading similar to the plaintext case. The data
will be copied to a (potentially) recycled TLS packet-sized buffer for
interaction with the SSLEngine.
This fixes#41794. Currently the read timeout test queues up responses
in the netty pipeline. These responses are immediately returned in the
write call, but they are not released. This commit releases the
responses. This will cause the leak detector to quit throwing
exceptions.
This is related to #27260. Currently there is a setting
http.read_timeout that allows users to define a read timeout for the
http transport. This commit implements support for this functionality
with the transport-nio plugin. The behavior here is that a repeating
task will be scheduled for the interval defined. If there have been
no requests received since the last run and there are no inflight
requests, the channel will be closed.
* Implement Bulk Deletes for GCS Repository (#41368)
* Just like #40322 for AWS
* We already had a bulk delete API but weren't using it from the blob container implementation, now we are using it
* Made the bulk delete API also compliant with our interface that only suppresses errors about non existent blobs by stating failed deletes (I didn't use any bulk stat action here since having to stat here should be the exception anyway and it would make error handling a lot more complex)
* Fixed bulk delete API to limit its batch size to 100 in line with GCS recommendations
back port of #41368
This is related to #27260. Currently for the SSLDriver we allocate a
dedicated network write buffer and encrypt the data into that buffer one
buffer at a time. This requires constantly switching between encrypting
and flushing. This commit adds a dedicated outbound buffer for SSL
operations that will internally allocate new packet sized buffers as
they are need (for writing encrypted data). This allows us to totally
encrypt an operation before writing it to the network. Eventually it can
be hooked up to buffer recycling.
This commit also backports the following commit:
Handle WRAP ops during SSL read
It is possible that a WRAP operation can occur while decrypting
handshake data in TLS 1.3. The SSLDriver does not currently handle this
well as it does not have access to the outbound buffer during read call.
This commit moves the buffer into the Driver to fix this issue. Data
wrapped during a read call will be queued for writing after the read
call is complete.
Motivated by slow snapshot deletes reported in e.g. #39656 and the fact that these likely are a contributing factor to repositories accumulating stale files over time when deletes fail to finish in time and are interrupted before they can complete.
* Makes snapshot deletion async and parallelizes some steps of the delete process that can be safely run concurrently via the snapshot thread poll
* I did not take the biggest potential speedup step here and parallelize the shard file deletion because that's probably better handled by moving to bulk deletes where possible (and can still be parallelized via the snapshot pool where it isn't). Also, I wanted to keep the size of the PR manageable.
* See https://github.com/elastic/elasticsearch/pull/39656#issuecomment-470492106
* Also, as a side effect this gives the `SnapshotResiliencyTests` a little more coverage for master failover scenarios (since parallel access to a blob store repository during deletes is now possible since a delete isn't a single task anymore).
* By adding a `ThreadPool` reference to the repository this also lays the groundwork to parallelizing shard snapshot uploads to improve the situation reported in #39657
This is related to #27260. Currently for the SSLDriver we allocate a
dedicated network write buffer and encrypt the data into that buffer one
buffer at a time. This requires constantly switching between encrypting
and flushing. This commit adds a dedicated outbound buffer for SSL
operations that will internally allocate new packet sized buffers as
they are need (for writing encrypted data). This allows us to totally
encrypt an operation before writing it to the network. Eventually it can
be hooked up to buffer recycling.
* The check doesn't add much if anything practically, since the S3 repository is eventually consistent and we only log the non-existence of a blob anyway
* We don't do the check on writes for this very reason and documented it as such
* Removing the check saves one API call per single delete speeding up the deletion process and lowering costs
* Adds Bulk delete API to blob container
* Implement bulk delete API for S3
* Adjust S3Fixture to accept both path styles for bulk deletes since the S3 SDK uses both during our ITs
* Closes#40250
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
This change updates our version of httpclient to version 4.5.8, which
contains the fix for HTTPCLIENT-1968, which is a bug where the client
started re-writing paths that contained encoded reserved characters
with their unreserved form.
The xlint exclusions of the following plugins were removed:
* ingest-attachment.
* mapper-size.
* transport-nio. Removing the -try exclusion required some work, because
the NettyAdaptor implements AutoCloseable and NettyAdaptor#close() method
could throw an InterruptedException (ChannelFuture#await() and a generic
Exception is re-thrown, which maybe an ChannelFuture). The easiest way
around this to me seemed that NettyAdaptor should not implement AutoCloseable,
because it is not directly used in a try-with-resources statement.
Relates to #40366
This change adds the following internal refactorings:
* wraps input analyzers into an unmodifiable map in IndexAnalyzers ctor
* removes duplicated indexSetting in IndexAnalyzers
* removes references to IndexAnalyzers from DocumentMapperParser and TypeParser.ParserContext.
It can always be retrieve it from MapperService directly in those cases
The hdfs-fixture is actually executed in plugin/repository-hdfs as a
dependency. The fixture is not needed and actually causes a failure
because we have two copies now and both use the same ports.
* Fix 3rd pary S3 tests
This is allready excluded on line 186, by doing this again here, the
other exclusion from arround that line are removed causing the tests to
fail.
* Fix blacklisting with the fixture
Replaces the vagrant based kerberos fixtures with docker based test fixtures plugin.
The configuration is now entirely static on the docker side and no longer driven by Gradle,
also two different services are being configured since there are two different consumers of the fixture that can run in parallel and require different configurations.
Adds the search_as_you_type field type that acts like a text field optimized
for as-you-type search completion. It creates a couple subfields that analyze
the indexed terms as shingles, against which full terms are queried, and a
prefix subfield that analyze terms as the largest shingle size used and
edge-ngrams, against which partial terms are queried
Adds a match_bool_prefix query type that creates a boolean clause of a term
query for each term except the last, for which a boolean clause with a prefix
query is created.
The match_bool_prefix query is the recommended way of querying a search as you
type field, which will boil down to term queries for each shingle of the input
text on the appropriate shingle field, and the final (possibly partial) term
as a term query on the prefix field. This field type also supports phrase and
phrase prefix queries however
This commit adds an InboundHandler to handle inbound message processing.
With this commit, this code is moved out of the TcpTransport.
Additionally, finer grained unit tests are added to ensure that the
inbound processing works as expected
Currently there are some components of message serializer and sending
that still occur in TcpTransport. This commit makes it possible to
send a message without the TcpTransport by moving all of the remaining
application logic to the OutboundHandler. Additionally, it adds unit
tests to ensure that this logic works as expected.
* Add support for setting and keystore settings
* system properties and env var config
* use testclusters for repository-s3
* Some cleanup of the build.gradle file for plugin-s3
* add runner {} to rest integ test task
FilterDirectory.getPendingDeletions does not delegate, fixed
temporarily by overriding in StoreDirectory.
This in turn caused duplicate file name use after a trimUnsafeCommits
had been done, since a new IndexWriter would not consider the pending
deletes in IndexFileDeleter. This should only happen on windows (AFAIK).
Reenabled doing index updates for all tests using
IndexShardTests.indexOnReplicaWithGaps (which could fail due to above
when using mocked WindowsFS).
Added getPendingDeletions delegation to all elasticsearch
FilterDirectory subclasses that were not trivial test-only overrides to
minimize the risk of hitting this issue in another case.
Currently, we maintain a transport name ("mock-nio", "nio", "netty")
that is passed to a `TcpTransportChannel` when a request is received.
The value of this name is to associate with the task when we register a
task with the task manager. However, it is only possible to run ES with
one transport, so having an implementation specific name is unnecessary.
This commit removes the name and replaces it with the generic
"transport".
This commit adds a variant for every official distribution that omits
the bundled jdk. The "no-jdk" naming is conveyed through the package
classifier, alongside the platform. Package tests are also added for
each new distribution.
This change marks the transport-nio plugin as having a client jar. The
nio transport can be used from a transport client and the
x-pack-transport artifact depends on the transport-nio jar but this jar
is not published. This change marks the transport-nio project as having
a client jar so that the jar may be published in the same way that we
publish the netty4 transport artifact.
The change to actually publish the jar will be handled separately as an
update to the release manager.
* Optimize Bulk Message Parsing and Message Length Parsing
* findNextMarker took almost 1ms per invocation during the PMC rally track
* Fixed to be about an order of magnitude faster by using Netty's bulk `ByteBuf` search
* It is unnecessary to instantiate an object (the input stream wrapper) and throw it away, just to read the `int` length from the message bytes
* Fixed by adding bulk `int` read to BytesReference
* Un-mute and fix BuildExamplePluginsIT
There doesn't seem to be anything wrong with the test iteself.
I think the failure were CI performance related, but while it was muted,
some failures managed to sneak in.
Closes#38784
* PR review
Backport of #39350
Contains the following:
* LUCENE-8635: Move terms dictionary off-heap for non-primary-key fields in `MMapDirectory`
* LUCENE-8292: `TermsEnum` is fully abstract
* LUCENE-8679: Return WITHIN in `EdgeTree#relateTriangle` only when polygon and triangle share one edge
* LUCENE-8676: Nori tokenizer deals correctly with large buffers
* LUCENE-8697: `GraphTokenStreamFiniteStrings` better handles side paths with gaps
* LUCENE-8664: Add `equals` and `hashCode` to `TotalHits`
* LUCENE-8660: `TopDocsCollector` returns accurate hit counts if the total equals the threshold
* LUCENE-8654: `Polygon2D#relateTriangle` fix for when the polygon is inside the triangle
* LUCENE-8645: `Intervals#fixField` can merge intervals from different fields
* LUCENE-8585: Create jump-tables for DocValues at index time
Blob store compression was not enabled for some of the files in
snapshots due to constructor accessing sub-class fields. Fixed to
instead accept compress field as constructor param. Also fixed chunk
size validation to work.
Deprecated repositories.fs.compress setting as well to be able to unify
in a future commit.
DfsPhase captures terms used for scoring a query in order to build global term statistics across
multiple shards for more accurate scoring. It currently does this by building the query's `Weight`
and calling `extractTerms` on it to collect terms, and then calling `IndexSearcher.termStatistics()`
for each collected term. This duplicates work, however, as the various `Weight` implementations
will already have collected these statistics at construction time.
This commit replaces this round-about way of collecting stats, instead using a delegating
IndexSearcher that collects the term contexts and statistics when `IndexSearcher.termStatistics()`
is called from the Weight.
It also fixes a bug when using rescorers, where a `QueryRescorer` would calculate distributed term
statistics, but ignore field statistics. `Rescorer.extractTerms` has been removed, and replaced with
a new method on `RescoreContext` that returns any queries used by the rescore implementation.
The delegating IndexSearcher then collects term contexts and statistics in the same way described
above for each Query.
This commit changes the `TransportVerifyShardBeforeCloseAction` so that it
always forces the flush of the shard. It seems that #37961 is not sufficient to
ensure that the translog and the Lucene commit share the exact same max
seq no and global checkpoint information in case of one or more noop
operations have been made.
The `BulkWithUpdatesIT.testThatMissingIndexDoesNotAbortFullBulkRequest`
and `FrozenIndexTests.testFreezeEmptyIndexWithTranslogOps` test this trivial
situation and they both fail 1 on 10 executions.
Relates to #33888
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
For some users, the built in authorization mechanism does not fit their
needs and no feature that we offer would allow them to control the
authorization process to meet their needs. In order to support this,
a concept of an AuthorizationEngine is being introduced, which can be
provided using the security extension mechanism.
An AuthorizationEngine is responsible for making the authorization
decisions about a request. The engine is responsible for knowing how to
authorize and can be backed by whatever mechanism a user wants. The
default mechanism is one backed by roles to provide the authorization
decisions. The AuthorizationEngine will be called by the
AuthorizationService, which handles more of the internal workings that
apply in general to authorization within Elasticsearch.
In order to support external authorization services that would back an
authorization engine, the entire authorization process has become
asynchronous, which also includes all calls to the AuthorizationEngine.
The use of roles also leaked out of the AuthorizationService in our
existing code that is not specifically related to roles so this also
needed to be addressed. RequestInterceptor instances sometimes used a
role to ensure a user was not attempting to escalate their privileges.
Addressing this leakage of roles meant that the RequestInterceptor
execution needed to move within the AuthorizationService and that
AuthorizationEngines needed to support detection of whether a user has
more privileges on a name than another. The second area where roles
leaked to the user is in the handling of a few privilege APIs that
could be used to retrieve the user's privileges or ask if a user has
privileges to perform an action. To remove the leakage of roles from
these actions, the AuthorizationService and AuthorizationEngine gained
methods that enabled an AuthorizationEngine to return the response for
these APIs.
Ultimately this feature is the work included in:
#37785#37495#37328#36245#38137#38219Closes#32435
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
This PR attempts to remove all typed calls from our YAML REST tests. The PR adds include_type_name: false to create index requests that use a mapping and also to put mapping requests. It also removes _type from index requests where they haven't already been removed. The PR ignores tests named *_with_types.yml since this are specifically testing typed API behaviour.
The change also includes changing the test harness to add the type _doc to index, update, get and bulk requests that do not specify the document type when the test is running against a mixed 7.x/6.x cluster.
* Make repository settings override static settings
* Cache clients according to settings
* Introduce custom implementations for the AWS credentials here to be able to use them as part of a hash key
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
This commit introduces a NetworkMessage class. This class has two
subclasses - InboundMessage and OutboundMessage. These messages can
be serialized and deserialized independent of the transport. This allows
more granular testing. Additionally, the serialization mechanism is now
a simple Supplier. This builds the framework to eventually move the
serialization of transport messages to the network thread. This is the
one serialization component that is not currently performed on the
network thread (transport deserialization and http serialization and
deserialization are all on the network thread).
Currently we create dedicated network threads for both the http and
transport implementations. Since these these threads should never
perform blocking operations, these threads could be shared. This commit
modifies the nio-transport to have 0 http workers be default. If the
default configs are used, this will cause the http transport to be run
on the transport worker threads. The http worker setting will still exist
in case the user would like to configure dedicated workers. Additionally,
this commmit deletes dedicated acceptor threads. We have never had these
for the netty transport and they can be added back if a need is
determined in the future.
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
This change adds a way to customize how phrase prefix queries should be created
on field types. The match phrase prefix query is exposed in field types in order
to allow optimizations based on the options set on the field.
For instance the text field uses the configured prefix field (if available) to
build a span near that mixes the original field and the prefix field on the last
position.
This change also contains a small refactoring of the match/multi_match query that
simplifies the interactions between the builders.
Closes#31921
The AbstracLifecycleComponent used to extend AbstractComponent, so it had to pass settings to the constractor of its supper class.
It no longer extends the AbstractComponent so there is no need for this constructor
There is also no need for AbstracLifecycleComponent subclasses to have Settings in their constructors if they were only passing it over to super constructor.
This is part 1. which will be backported to 6.x with a migration guide/deprecation log.
part 2 will have this constructor removed in 7
relates #35560
relates #34488
We recently migrated suggestions to `Writeable`. That allows us to also
clean up empty constructors and methods that called them as they are no
longer needed. They are replaced by constructors that accept a
`StreamInput` instance.
Today, a setting can declare that its validity depends on the values of other
related settings. However, the validity of a setting is not always checked
against the correct values of its dependent settings because those settings'
correct values may not be available when the validator runs.
This commit separates the validation of a settings updates into two phases,
with separate methods on the `Setting.Validator` interface. In the first phase
the setting's validity is checked in isolation, and in the second phase it is
checked again against the values of its related settings. Most settings only
use the first phase, and only the few settings with dependencies make use of
the second phase.
* There is no point in hsyncing after every individual write since there is only value in completely written blobs for restores, this is ensures by the `SYNC` flag already and there is no need for separately invoking `hsync` after individual writes
Today the routing of a SourceToParse is assigned in a separate step
after the object is created. We can easily forget to set the routing.
With this commit, the routing must be provided in the constructor of
SourceToParse.
Relates #36921
Today the default databases bundled with ingest-geoip are treated as
configuration files that we unbundle into the Elasticsearch
configuration directory. This can cause problems for users using our
Docker images if they bind mount over the configuration
directory. Additionally, it creates complexity when trying to convert
ingest-geoip to a module. This commit moves these databases out of the
configuration directory and instead loads from the plugin
directory. Further, custom databases can still be put into the
configuration directory.
Today we try to load the ingest-geoip databases lazily. Currently they
are loaded as soon as any pipeline that uses an ingest-geoip processor
is created. This is not lazy enough. For example, we could only load the
databases the first time that they are actually used. This would ensure
that we load the minimal set of data to support an in-use pipeline
(instead of *all* of the data). This can come up in a couple of
ways. One is when a subset of the database is used (e.g., the city
database versus the country database versus the ASN database). Another
is when the plugins are installed on non-ingest nodes (e.g., master-only
nodes); we would never use the database in this case yet they are
currently being loaded occupying ~60 MB of the heap. This commit makes
the ingest-geoip databases as lazy as possible.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
This commit add support for using sequence numbers to power [optimistic concurrency control](http://en.wikipedia.org/wiki/Optimistic_concurrency_control)
in the delete and index transport actions and requests. A follow up will come with adding sequence
numbers to the update and get results.
Relates #36148
Relates #10708
This commit updates our transport settings for 7.0. It generally takes a
few approaches. First, for normal transport settings, it usestransport.
instead of transport.tcp. Second, it uses transport.tcp, http.tcp,
or network.tcp for all settings that are proxies for OS level socket
settings. Third, it marks the network.tcp.connect_timeout setting for
removal. Network service level settings are only settings that apply to
both the http and transport modules. There is no connect timeout in
http. Fourth, it moves all the transport settings to a single class
TransportSettings similar to the HttpTransportSettings class.
This commit does not actually remove any settings. It just adds the new
renamed settings and adds todos for settings that will be deprecated.
Includes the following:
* Reversion of doc-values changes in LUCENE-8374; we are interested in seeing if this
has an effect on benchmarks for node-stats and index-stats
* More improvements to docvalues updates
Currently our handshake requests do not include a version. This is
unfortunate as we cannot rely on the stream version since it is not the
sending node's version. Instead it is the minimum compatibility version.
The handshake request is currently empty and we do nothing with it. This
should allow us to add data to the request without breaking backwards
compatibility.
This commit adds the version to the handshake request. Additionally, it
allows "future data" to be added to the request. This allows nodes to craft
a version compatible response. And will properly handle additional data in
future handshake requests. The proper handling of "future data" is useful
as this is the only request where we do not know the other node's version.
Finally, it renames the TcpTransportHandshaker to
TransportHandshaker.
The different `DocValueFormat` implementors throw `UnsupportedOperationException` for methods that they don't support. That is perfectly fine, and quite common as not all implementors support all of the possible formats. This makes it hard though to trace back which implementors support which formats as they all implement the same methods.
This commit introduces default methods in the `DocValueFormat` interface so that all methods throw `UnsupportedOperationException` by default. This way implementors can override only the methods that they specifically support.
This commit modifies BigArrays to take a circuit breaker name and
the circuit breaking service. The default instance of BigArrays that
is passed around everywhere always uses the request breaker. At the
network level, we want to be using the inflight request breaker. So this
change will allow that.
Additionally, as this change moves away from a single instance of
BigArrays, the class is modified to not be a Releasable anymore.
Releasing big arrays was always dispatching to the PageCacheRecycler,
so this change makes the PageCacheRecycler the class that needs to be
managed and torn-down.
Finally, this commit closes#31435 be making the serialization of
transport messages use the inflight request breaker. With this change,
we no longer push the global BigArrays instnace to the network level.
Moves all remaining (rolling-upgrade and mixed-version) REST tests to use Zen2. To avoid adding
extra configuration, it relies on Zen2 being set as the default discovery type. This required a few
smaller changes in other tests. I've removed AzureMinimumMasterNodesTests which tests Zen1
functionality and dates from a time where host providers were not configurable and each cloud
plugin had its own discovery.type, subclassing the ZenDiscovery class. I've also adapted a few tests
which were unnecessarily adding addTestZenDiscovery = false for the same legacy reasons. Finally,
this also moves the unconfigured-node-name REST test to Zen2, testing the auto-bootstrapping
functionality in development mode when no discovery configuration is provided.
Add support for inlined user dictionary in Nori
This change adds a new option called `user_dictionary_rules` to the
Nori a tokenizer`. It can be used to set additional tokenization rules
to the Korean tokenizer directly in the settings (instead of using a file).
Closes#35842
Includes:
LUCENE-8594: DV update are broken for updates on new field
LUCENE-8590: Optimize DocValues update datastructures
LUCENE-8593: Specialize single value numeric DV updates
Relates #36286
This commit moves back to use explicit dependsOn for test tasks on
check. Not all tasks extending RandomizedTestingTask should be run by
check directly.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
This commit upgrades netty. This will close#35360. Netty started
throwing an IllegalArgumentException if a CompositeByteBuf is
created with < 2 components. Netty4Utils was updated to reflect this
change.
This is related to #34405 and a follow-up to #34753. It makes a number
of changes to our current keepalive pings.
The ping interval configuration is moved to the ConnectionProfile.
The server channel now responds to pings. This makes the keepalive
pings bidirectional.
On the client-side, the pings can now be optimized away. What this
means is that if the channel has received a message or sent a message
since the last pinging round, the ping is not sent for this round.
A number of tokenfilters can produce multiple tokens at the same position. This
is a problem when using token chains to parse synonym files, as the SynonymMap
requires that there are no stacked tokens in its input.
This commit ensures that when used to parse synonyms, these tokenfilters either produce
a single version of their input token, or that they throw an error when mappings are
generated. In indexes created in elasticsearch 6.x deprecation warnings are emitted in place
of the error.
* asciifolding and cjk_bigram produce only the folded or bigrammed token
* decompounders, synonyms and keyword_repeat are skipped
* n-grams, word-delimiter-filter, multiplexer, fingerprint and phonetic throw errors
Fixes#34298
This commit removes the dedicated `setSoLinger` method. This simplifies
the `TcpChannel` interface. This method has very little effect as the
SO_LINGER is not set prior to the channels being closed in the abstract
transport test case. We still will set SO_LINGER on the
`MockNioTransport`. However we can do this manually.
This commit is related to #32517. It allows an "sni_server_name"
attribute on a DiscoveryNode to be propagated to the server using
the TLS SNI extentsion. Prior to this commit, this functionality
was only support for the netty transport. This commit adds this
functionality to the security nio transport.
The ICU plugin provides the building blocks of an analysis chain, but doesn't actually have a prebuilt analyzer. It would be a better for users if there was a simple analyzer that they could use out of the box, and also something we can point to from the CJK Analyzer docs as a superior alternative.
Relates to #34285
This is related to #34483. It introduces a namespaced setting for
compression that allows users to configure compression on a per remote
cluster basis. The transport.tcp.compress remains as a fallback
setting. If transport.tcp.compress is set to true, then all requests
and responses are compressed. If it is set to false, only requests to
clusters based on the cluster.remote.cluster_name.transport.compress
setting are compressed. However, after this change regardless of any
local settings, responses will be compressed if the request that is
received was compressed.
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
This is related to #29023. Additionally at other points we have
discussed a preference for removing the need to unnecessarily block
threads for opening new node connections. This commit lays the groudwork
for this by opening connections asynchronously at the transport level.
We still block, however, this work will make it possible to eventually
remove all blocking on new connections out of the TransportService
and Transport.
Currently we create a new netty event loop group for client connections
and all server profiles. Each new group creates new threads for io
processing. This means 2 * num of processors new threads for each group.
A single group should be able to handle all io processing (for the
transports). This also brings the netty module inline with what we do
for nio.
Additionally, this PR renames the worker threads to be the same for
netty and nio.
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
Drops the `deprecationLogger` from `AbstractComponent`, moving it to
places where we need it. This saves us from building a bunch of
`DeprecationLogger`s that we don't need.
Relates to #34488
* Binding to `0` gives us free ports that are assigned sequentially by Linux making collisions much less likely compared to manually finding a free port in a range
* Closes#32208
After discussing on the team's FixItFriday, we concluded that
static final instance variables that are mutable should be lowercased.
Historically, DeprecationLogger was uppercased more frequently than lowercased.
This is related to #30876. The AbstractSimpleTransportTestCase initiates
many tcp connections. There are normally over 1,000 connections in
TIME_WAIT at the end of the test. This is because every test opens at
least two different transports that connect to each other with 13
channel connection profiles. This commit modifies the default
connection profile used by this test to 6. One connection for each
type, except for REG which gets 2 connections.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
This change adds instance bindings to Painless. This binding allows a whitelisted
method to be called on an instance instantiated prior to script compilation.
Whitelisting must be done in code as there is no practical way to instantiate a
useful instance from a text file (see the tests for an example). Since an
instance can be shared by multiple scripts, each method called must be
thread-safe.
We throw parsing exception when an unknown array is found, but we don't when an unknown top-level field is found. This commit makes sure that unsupported top-level fields are not ignored in a do section.
Closes#34651
With this change, we apply the common test config automatically to all
newly created tasks instead of opting in specifically.
For plugin authors using the plugin externally this means that the
configuration will be applied to their RandomizedTestingTasks as well.
The purpose of the task is to simplify setup and make it easier to
change projects that use the `test` task but actually run integration
tests to use a task called `integTest` for clarity, but also because
we may want to configure and run them differently.
E.x. using different levels of concurrency.
This slightly reworks the expert script plugin example so it fits on the
page when the docs are rendered. The box in which it is rendered is not
very wide so it took a bit of twisting to make it readable.
We are using a deprecated method for checking if an S3 bucket
exists. This deprecated method has a limitation that it can not
distinguish between invalid credentials and a lack of permissions. This
commit switches to using a method that correctly surfaces if invalid
credentials are supplied when checking for the existence of a bucket.
The synonym filters no longer need access to the AnalysisRegistry in their
constructors, so we can remove the special-case code and move them to the
common analysis module.
This commit means that synonyms are no longer available for `server` integration tests,
so several of these are either rewritten or migrated to the common analysis module
as rest-spec-api tests
Currently a bad regex in CORS settings throws a PatternSyntaxException, which
then bubbles up through the bootstrap code, meaning users have to parse a
stack trace to work out where the problem is. We should instead catch this
exception and rethrow with a more useful error message.
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit introduces an AbstractSimpleSecurityTransportTestCase for
security transports. This classes provides transport tests that are
specific for security transports. Additionally, it fixes the tests referenced in
#33285.
This change adds the OneStatementPerLineCheck to our checkstyle precommit
checks. This rule restricts the number of statements per line to one. The
resoning behind this is that it is very difficult to read multiple statements on
one line. People seem to mostly use it in short lambdas and switch statements in
our code base, but just going through the changes already uncovered some actual
problems in randomization in test code, so I think its worth it.
Drops `Settings` from some of the methods to lookup loggers and
deprecates another logger lookup that takes `Settings` because
`Settings` is no longer required to build a logger.
In cases when mixed secure S3 client credentials and insecure S3 client
credentials were used (that is, those defined on the repository), we
were overriding the credentials from the repository using insecure
settings to all the repositories. This commit fixes this by not mixing
up repositories that use insecure settings with those that use secure
settings.
In #33241 we moved the file-based discovery functionality to core
Elasticsearch, but preserved the `discovery-file` plugin, and support for the
existing location of the `unicast_hosts.txt` file, for BWC reasons. This commit
completes the removal of this plugin.
New plugin for annotated_text field type.
Largely a copy of `text` field type but adds ability to include markdown-like syntax in the text.
The “AnnotatedText” class parses text+markup and converts into plain text and AnnotationTokens.
The annotation token values are injected unchanged alongside the regular text tokens to provide a
form of additional indexed overlay useful in positional searches and highlighting.
Annotated_text fields do not support fielddata as we want to phase this out.
Also includes a new "annotated" highlighter type that retains annotations and merges in search
hits as additional annotation markup.
Closes#29467
* LeafCollector.setScorer() now takes a Scorable
* Scorers may not have null Weights
* IndexWriter.getFlushingBytes() reports how much memory is being used by IW threads writing to disk
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
Historically we have had a ESLoggingHandler in the netty module that
logs low-level connection operations. This class just extends the netty
logging handler with some (broken) message deserialization. This commit
fixes this message serialization and moves the class to server.
This new logger logs inbound and outbound messages. Eventually, we
should move other event logging to this class (connect, close, flush).
That way we will have consistent logging regards of which transport is
loaded.
Resolves#27306 on master. Older branches will need a different fix.
Re-implement the cache to avoid jackson JSON de-serialization for
every IP lookup. The built in maxmind cache caches JsonNode objects.
This requires de-serialization for every lookup, even if the object
is found in cache. Profiling shows that is very expensive (CPU).
The cache will now consist of the fully de-serialized objects.
Profiling shows that the new footprint for the CityDB is ~6KB per cache
entry. This may result in ~6MB increase with the 1000 entry default.
The performance has been measured up to 40% faster on a modern 4 core/8 thread
CPU for an ingest (minimal indexing) workflow.
Further, the since prior implementation cached the JsonNode objects,
and there is not a 1:1 relationship between an IP lookup / JsonNode
object, the default cache size was most likely too small to be very
effective. While this change does not change the 1000 default cache
size, it will now cache more since there is now a 1:1 relationship between
an IP lookup and value in the cache.
Today we support a static list of seed hosts in core Elasticsearch, and allow a
dynamic list of seed hosts to be provided via a file using the `discovery-file`
plugin. In fact the ability to provide a dynamic list of seed hosts is
increasingly useful, so this change moves this functionality to core
Elasticsearch to avoid the need for a plugin.
Furthermore, in order to start up nodes in integration tests we currently
assign a known port to each node before startup, which unfortunately sometimes
fails if another process grabs the selected port in the meantime. By moving the
`discovery-file` functionality into the core product we can use it to avoid
this race.
This change also moves the expected path to the file from
`$ES_PATH_CONF/discovery-file/unicast_hosts.txt` to
`$ES_PATH_CONF/unicast_hosts.txt`. An example of this file is not included in
distributions.
For BWC purposes the plugin still exists, but does nothing more than create the
example file in the old location, and issue a warning when it is used. We also
continue to support the old location for the file, but warn about its
deprecation.
Relates #29244Closes#33030
* master:
Painless: Add Bindings (#33042)
Update version after client credentials backport
Fix forbidden apis on FIPS (#33202)
Remote 6.x transport BWC Layer for `_shrink` (#33236)
Test fix - Graph HLRC tests needed another field adding to randomisation exception list
HLRC: Add ML Get Records API (#33085)
[ML] Fix character set finder bug with unencodable charsets (#33234)
TESTS: Fix overly long lines (#33240)
Test fix - Graph HLRC test was missing field name to be excluded from randomisation logic
Remove unsupported group_shard_failures parameter (#33208)
Update BucketUtils#suggestShardSideQueueSize signature (#33210)
Parse PEM Key files leniantly (#33173)
INGEST: Add Pipeline Processor (#32473)
Core: Add java time xcontent serializers (#33120)
Consider multi release jars when running third party audit (#33206)
Update MSI documentation (#31950)
HLRC: create base timed request class (#33216)
[DOCS] Fixes command page titles
HLRC: Move ML protocol classes into client ml package (#33203)
Scroll queries asking for rescore are considered invalid (#32918)
Painless: Fix Semicolon Regression (#33212)
ingest: minor - update test to include dissect (#33211)
Switch remaining LLREST usage to new style Requests (#33171)
HLREST: add reindex API (#32679)
- third party audit detects jar hell with JDK so we disable it
- jdk non portable in forbiddenapis detects classes being used from the
JDK ( for fips ) that are not portable, this is intended so we don't
scan for it on fips.
- different exclusion rules for third party audit on fips
Closes#33179
* master:
[Rollup] Better error message when trying to set non-rollup index (#32965)
HLRC: Use Optional in validation logic (#33104)
Remove unused User class from protocol (#33137)
ingest: Introduce the dissect processor (#32884)
[Docs] Add link to es-kotlin-wrapper-client (#32618)
[Docs] Remove repeating words (#33087)
Minor spelling and grammar fix (#32931)
Remove support for deprecated params._agg/_aggs for scripted metric aggregations (#32979)
Watcher: Simplify finding next date in cron schedule (#33015)
Run Third party audit with forbidden APIs CLI (part3/3) (#33052)
Fix plugin build test on Windows (#33078)
HLRC+MINOR: Remove Unused Private Method (#33165)
Remove old unused test script files (#32970)
Build analysis-icu client JAR (#33184)
Ensure to generate identical NoOp for the same failure (#33141)
ShardSearchFailure#readFrom to set index and shardId (#33161)
The new implementation is functional equivalent with the old, ant based one.
It parses task standard error to get the missing classes and violations in the same way.
I considered re-using ForbiddenApisCliTask but Gradle makes it hard to build inheritance with tasks that have task actions , since the order of the task actions can't be controlled.
This inheritance isn't dully desired either as the third party audit task is much more opinionated and we don't want to expose some of the configuration.
We could probably extract a common base class without any task actions, but probably more trouble than it's worth.
Closes#31715
This plugin needs to be able to be installed client side because it
contains doc values formats that can be returned to the transport
client. To keep this simple for developers, we publish the client JAR to
Maven so that they can depend on the plugin in their POM and install the
plugin there.
Jason Tedor
Armin Braun
Ignacio Vera
Tim Brooks
Ryan Ernst
Yogesh Gaikwad
Nick Knize
Yannick Welsch
Mark Vieira
Alpar Torok
Alan Woodward
Jack Conradson
Martijn Laarman
Simon Willnauer
Christoph Büscher
Henning Andersen
Mayya Sharipova
Jim Ferenczi
Jim Ferenczi
Jay Modi
Alpar Torok
David Turner
clement-tourriere
Martijn van Groningen
Andy Bristol
Ryan Ernst
David Emanuel Buchmann
markharwood
Alan Woodward
Tanguy Leroux
Luca Cavanna
Julie Tibshirani
Colin Goodheart-Smithe
Alexander Reelsen
Adrien Grand
Przemyslaw Gomulka
Daniel Mitterdorfer
Christophe Bismuth
Nhat Nguyen
Boaz Leskes
Gordon Brown
Jernej Klancic
Vladimir Dolzhenko
Ke Li
Nik Everett
Pratik Sanglikar
Tal Levy
Benjamin Trent
Igor Motov
Ioannis Kakavas
Kazuhiro Sera
Nick Peihl
Or Bin
Jake Landis