It's not clear how this ever worked (npm hoisting is a suspect though), but this dep is required because
one of the tests imports @babel/generator in the ts sources.
The lack of this dep is breaking builds on the master branch.
More discussion about this issue on Slack: https://angular-team.slack.com/archives/C07DT5M6V/p1579934766007500
PR Close#34974
As part of the effort to tighten the API surface of
`TypeScriptServiceHost` in preparation for the migration to Ivy, I realized
some recently added APIs are not strictly needed.
They can be safely removed without sacrificing functionality.
This allows us to clean up the code, especially in the implementation of
QuickInfo, where the `TypeScriptServiceHost` is leaked outside of the
`LanguageService` class.
This refactoring also cleans up some duplicate code where the QuickInfo
object is generated. The logic is now consolidated into a simple
`createQuickInfo` method shared across two different implementations.
PR Close#34941
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
This change introduces several functions for manipulating items in an array in an efficient (binary search) way.
- `arraySplice` a faster version of `Array.splice()`.
- `arrayInsert` a faster version of `Array.splice(index, 0, value)`.
- `arrayInsert2` a faster version of `Array.splice(index, 0, value1, value2)`.
- `arrayInsertSorted` a way to insert a value into sorted list.
- `arrayRemoveSorted` a way to remove a value from a sorted list.
- `arrayIndexOfSorted` a way to find a value in a sorted list.
- `ArrayMap` Efficient implementation of `Map` as an `Array`.
- `arrayMapSet`, `arrayMapGet`, `arrayMapIndexOf`, and `arrayMapDelete` for manipulating `ArrayMap`s.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
Parsing styling is now simplified to be used like so:
```
for (let i = parseStyle(text); i <= 0; i = parseStyleNext(text, i)) {
const key = getLastParsedKey();
const value = getLastParsedValue();
...
}
```
This change makes it easier to invoke the parser from other locations in the system without paying the cost of creating and iterating over `Map` of styles.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This adds `insertTStyleValue` but does not hook it up to anything yet.
The purpose of this function is to create a linked-list of styling
related bindings. The bindings can be traversed during flush.
The linked list also keeps track of duplicates. This is important
for binding to know if it needs to check other styles for reconciliation.
PR Close#34004
This change introduces class/style reconciliation algorithm for DOM elements.
NOTE: The code is not yet hooked up, it will be used by future style algorithm.
Background:
Styling algorithm currently has [two paths](https://hackmd.io/@5zDGNGArSxiHhgvxRGrg-g/rycZk3N5S)
when computing how the style should be rendered.
1. A direct path which concatenates styling and uses `elemnent.className`/`element.style.cssText` and
2. A merge path which uses internal data structures and uses `element.classList.add/remove`/`element.style[property]`.
The situation is confusing and hard to follow/maintain. So a future PR will remove the merge-path and do everything with
direct-path. This however breaks when some other code adds class or style to the element without Angular's knowledge.
If this happens instead of switching from direct-path to merge-path algorithm, this change provides a different mental model
whereby we always do `direct-path` but the code which writes to the DOM detects the situation and reconciles the out of bound write.
The reconciliation process is as follows:
1. Detect that no one has modified `className`/`cssText` and if so just write directly (fast path).
2. If out of bounds write did occur, switch from writing using `className`/`cssText` to `element.classList.add/remove`/`element.style[property]`.
This does require that the write function computes the difference between the previous Angular expected state and current Angular state.
(This requires a parser. The advantage of having a parser is that we can support `style="width: {{exp}}px" kind of bindings.`)
Compute the diff and apply it in non destructive way using `element.classList.add/remove`/`element.style[property]`
Properties of approach:
- If no out of bounds style modification:
- Very fast code path: Just concatenate string in right order and write them to DOM.
- Class list order is preserved
- If out of bounds style modification detected:
- Penalty for parsing
- Switch to non destructive modification: `element.classList.add/remove`/`element.style[property]`
- Switch to alphabetical way of setting classes.
PR Close#34004
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
The `aio_monitoring_stable` CI job needs to check out (and execute
commands on) some files from the stable branch. Therefore, it needs to
use a version of `yarn` that is compatible with the `engines` version
specified in `aio/package.json`.
In #34902 (and subsequently #34952 for the 8.2.x branch), the way to
access our vendored version of yarn changed. This commit ensures that we
checkout the necessary files from the stable branch to use an
appropriate yarn version.
PR Close#34954
Previously, NgtscProgram lived in the main @angular/compiler-cli package
alongside the legacy View Engine compiler. As a result, the main package
depended on all of the ngtsc internal packages, and a significant portion of
ngtsc logic lived in NgtscProgram.
This commit refactors NgtscProgram and moves the main logic of compilation
into a new 'core' package. The new package defines a new API which enables
implementers of TypeScript compilers (compilers built using the TS API) to
support Angular transpilation as well. It involves a new NgCompiler type
which takes a ts.Program and performs Angular analysis and transformations,
as well as an NgCompilerHost which wraps an input ts.CompilerHost and adds
any extra Angular files.
Together, these two classes are used to implement a new NgtscProgram which
adapts the legacy api.Program interface used by the View Engine compiler
onto operations on the new types. The new NgtscProgram implementation is
significantly smaller and easier to reason about.
The new NgCompilerHost replaces the previous GeneratedShimsHostWrapper which
lived in the 'shims' package.
A new 'resource' package is added to support the HostResourceLoader which
previously lived in the outer compiler package.
As a result of the refactoring, the dependencies of the outer
@angular/compiler-cli package on ngtsc internal packages are significantly
trimmed.
This refactoring was driven by the desire to build a plugin interface to the
compiler so that tsc_wrapped (another consumer of the TS compiler APIs) can
perform Angular transpilation on user request.
PR Close#34887
Right now, if an Angular diagnostic is generated for a TypeScript node,
the span points to the decorator Identifier, i.e. the Identifier node
like `@NgModule`, `@Component`, etc.
This is weird. It should point to the class name instead.
Note, we do not have a more fine-grained breakdown of the span when
diagnostics are emitted, this work remains to be done.
PR Close#34932
In #34288, ngtsc was refactored to separate the result of the analysis
and resolve phase for more granular incremental rebuilds. In this model,
any errors in one phase transition the trait into an error state, which
prevents it from being ran through subsequent phases. The ngcc compiler
on the other hand did not adopt this strict error model, which would
cause incomplete metadata—due to errors in earlier phases—to be offered
for compilation that could result in a hard crash.
This commit updates ngcc to take advantage of ngtsc's `TraitCompiler`,
that internally manages all Ivy classes that are part of the
compilation. This effectively replaces ngcc's own `AnalyzedFile` and
`AnalyzedClass` types, together with all of the logic to drive the
`DecoratorHandler`s. All of this is now handled in the `TraitCompiler`,
benefiting from its explicit state transitions of `Trait`s so that the
ngcc crash is a thing of the past.
Fixes#34500
Resolves FW-1788
PR Close#34889
This syntax is invalid in these source files and does result in
compilation errors as the constructor parameters could not be resolved.
This hasn't been an issue until now as those errors were ignored in the
tests, but future work to introduce the Trait system of ngtsc into
ngcc will cause these errors to prevent compilation, resulting in broken
tests.
PR Close#34889
Previously, while trying to build an `NgccReflectionHost`'s
`privateDtsDeclarationMap`, `computePrivateDtsDeclarationMap()` would
try to collect exported declarations from all source files of the
program (i.e. without checking whether they were within the target
package, as happens for declarations in `.d.ts` files).
Most of the time, that would not be a problem, because external packages
would be represented as `.d.ts` files in the program. But when an
external package had no typings, the JS files would be used instead. As
a result, the `ReflectionHost` would try to (unnecessarilly) parse the
file in order to extract exported declarations, which in turn would be
harmless in most cases.
There are certain cases, though, where the `ReflectionHost` would throw
an error, because it cannot parse the external package's JS file. This
could happen, for example, in `UmdReflectionHost`, which expects the
file to contain exactly one statement. See #34544 for more details on a
real-world failure.
This commit fixes the issue by ensuring that
`computePrivateDtsDeclarationMap()` will only collect exported
declarations from files within the target package.
Jira issue: [FW-1794](https://angular-team.atlassian.net/browse/FW-1794)
Fixes#34544
PR Close#34811
The value changes emitted additionally when enable disable were called
documented the above behaviour in AbstractControl class documentaion
Fixes#34407
PR Close#34497
This commit fixes a bug in the incremental rebuild engine of ngtsc, where if
a component was removed from its NgModule, it would not be properly
re-emitted.
The bug stemmed from the fact that whether to emit a file was a decision
based purely on the updated dependency graph, which captures the dependency
structure of the rebuild program. This graph has no edge from the component
to its former module (as it was removed, of course), so the compiler
erroneously decides not to emit the component.
The bug here is that the compiler does know, from the previous dependency
graph, that the component file has logically changed, since its previous
dependency (the module file) has changed. This information was not carried
forward into the set of files which need to be emitted, because it was
assumed that the updated dependency graph was a more accurate source of that
information.
With this commit, the set of files which need emit is pre-populated with the
set of logically changed files, to cover edge cases like this.
Fixes#34813
PR Close#34912
We rename the `material-unit-tests` job to `components-repo-unit-tests`
because the job runs all unit tests found in the Angular Components repository.
This includes the Angular CDK, Angular Material and more. Also the repository has
been renamed from `angular/material2` to `angular/components` in the past.
PR Close#34898
It was previously defined in core without being exposed publicly, whereas `getLocaleCurrencyName` and `getLocaleCurrencySymbol` were defined in common, and publicly exposed.
This commit now privately exposes `ɵgetLocaleCurrencyCode` from core, and reexports it publicly from common.
PR Close#34810
This commit elaborates diagnostics produced for invalid template
contexts by including the name of the embedded template type using the
template context, and in the common case that the implicity property is
being referenced (e.g. in a `for .. of ..` expression), suggesting to
refine the type of the context. This suggestion is provided because
users will sometimes use a base class as the type of the context in the
embedded view, and a more specific context later on (e.g. in an
`ngOnChanges` method).
Closes https://github.com/angular/vscode-ng-language-service/issues/251
PR Close#34751
Rather than enforcing yarn versioning using `package.json`'s
engines value. We can utilize yarn's `yarn-path` value to
ensure that the version of yarn used at execution time is
consistent for everyone who uses our repo. This is the first
step in this wider vendoring process. We will use this same
vendoring mechanism for CI after
https://github.com/bazelbuild/rules_nodejs/pull/1569 lands
PR Close#34902
Creates a Bazel macro that can be used to test packages for
circular dependencies. We face one limitation with Bazel:
* Built packages use module imports, and not relative source file
paths. This means we need custom resolution.
Fortunately, tools like `madge` support custom resolution.
Also removes the outdated `check-cycles` gulp task that
didn't catch circular dependencies. It seems like the test
became broken when we switched the packages-dist output to Bazel. It
breaks because the Bazel output doesn't use relative paths, but uses
the module imports. This will be handled in the new Bazel macro/rule.
PR Close#34774
Previously, the template type-checker would always construct a generic
template context type with correct bounds, even when strictTemplates was
disabled. This meant that type-checking of expressions involving that type
was stricter than View Engine.
This commit introduces a 'strictContextGenerics' flag which behaves
similarly to other 'strictTemplates' flags, and switches the inference of
generic type parameters on the component context based on the value of this
flag.
PR Close#34649
FileToModuleHost aliasing supports compilation within environments that have
two properties:
1. A `FileToModuleHost` exists which defines canonical module names for any
given TS file.
2. Dependency restrictions exist which prevent the import of arbitrary files
even if such files are within the .d.ts transitive closure of a
compilation ("strictdeps").
In such an environment, generated imports can only go through import paths
which are already present in the user program. The aliasing system supports
the generation and consumption of such imports at runtime.
`FileToModuleHost` aliasing does not emit re-exports in .d.ts files. This
means that it's safe to rely on alias re-exports in generated .js code (they
are guaranteed to exist at runtime) but not in template type-checking code
(since TS will not be able to follow such imports). Therefore, non-aliased
imports should be used in template type-checking code.
This commit adds a `NoAliasing` flag to `ImportFlags` and sets it when
generating imports in template type-checking code. The testing environment
is also patched to support resolution of FileToModuleHost canonical paths
within the template type-checking program, enabling testing of this change.
PR Close#34649
Previously, `ReferenceEmitter.emit()` took an `ImportMode` enum value, where
one value of the enum allowed forcing new imports to be generated when
emitting a reference to some value or type.
This commit refactors `ImportMode` to be an `ImportFlags` value instead.
Using a bit field of flags will allow future customization of reference
emitting.
PR Close#34649
Previously, when generating template type-checking code, casts to 'any' were
produced as `expr as any`, regardless of the expression. However, for
certain expression types, this led to precedence issues with the cast. For
example, `a !== b` is a `ts.BinaryExpression`, and wrapping it directly in
the cast yields `a !== b as any`, which is semantically equivalent to
`a !== (b as any)`. This is obviously not what is intended.
Instead, this commit adds a list of expression types for which a "bare"
wrapping is permitted. For other expressions, parentheses are added to
ensure correct precedence: `(a !== b) as any`
PR Close#34649
Currently, the template type-checker gives an error if there are multiple
bindings to the same input. This commit aligns the behavior of the template
type-checker with the View Engine runtime: only the first binding to a field
has any effect. The rest are ignored.
PR Close#34649
It's possible to declare multiple inputs for a directive/component which all
map to the same property name. This is usually done in error, as only one of
any bindings to the property will "win".
In the template type-checker, an error was previously being raised as a
result of this ambiguity. Specifically, a type constructor was produced
which required a binding for each field, but only one of the fields had
a value via the binding. TypeScript would (rightfully) error on missing
values for the remaining fields. This ultimately was happening when the
code which generated the default values for "unset" inputs belonging to
directives or pipes used the final mapping from properties to fields as
a source for field names.
Instead, this commit uses the original list of fields to generate unset
input values, which correctly provides values for fields which shared a
property name but didn't receive the final binding.
PR Close#34649
Consider a library that uses a shared constant for host bindings. e.g.
```ts
export const BASE_BINDINGS= {
'[class.mat-themed]': '_isThemed',
}
----
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir1 {}
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir2 {}
```
Previously when these components were shipped as part of the
library to NPM, consumers were able to consume `Dir1` and `Dir2`.
No errors showed up.
Now with Ivy, when ngcc tries to process the library, an error
will be thrown. The error is stating that the host bindings should
be an object (which they obviously are). This happens because
TypeScript transforms the object spread to individual
`Object.assign` calls (for compatibility).
The partial evaluator used by the `@Directive` annotation handler
is unable to process this expression because there is no
integrated support for `Object.assign`. In View Engine, this was
not a problem because the `metadata.json` files from the library
were used to compute the host bindings.
Fixes#34659
PR Close#34661
Ngcc adds properties to the `package.json` files of the entry-points it
processes to mark them as processed for a format and point to the
created Ivy entry-points (in case of `--create-ivy-entry-points`). When
running ngcc in parallel mode (which is the default for the standalone
ngcc command), multiple formats can be processed simultaneously for the
same entry-point and the order of completion is not deterministic.
Previously, ngcc would append new properties at the end of the target
object in `package.json` as soon as the format processing was completed.
As a result, the order of properties in the resulting `package.json`
(when processing multiple formats for an entry-point in parallel) was
not deterministic. For tools that use file hashes for caching purposes
(such as Bazel), this lead to a high probability of cache misses.
This commit fixes the problem by ensuring that the position of
properties added to `package.json` files is deterministic and
independent of the order in which each format is processed.
Jira issue: [FW-1801](https://angular-team.atlassian.net/browse/FW-1801)
Fixes#34635
PR Close#34870
This commit adds a regression test to check that the language service
recognizes inputs and outputs declared in a directive decorator.
See #34874.
PR Close#34875
In Angular, symbol can have multiple definitions (e.g. a two-way
binding). This commit adds support for for multiple definitions for a
queried location in a template.
PR Close#34782
Igor Minar
Keen Yee Liau
Andrew Kushnir
Miško Hevery
Matias Niemelä
Kristiyan Kostadinov
George Kalpakas
Alex Rickabaugh
Pawel Kozlowski
JoostK
ajitsinghkaler
Paul Gschwendtner
Joey Perrott
cexbrayat
ayazhafiz
Ayaz Hafiz
Greg Magolan